]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/log
mirror_ubuntu-artful-kernel.git
14 years agoV4L/DVB: V4L: do not autoselect components on embedded systems
Guennadi Liakhovetski [Thu, 5 Aug 2010 21:09:28 +0000 (18:09 -0300)]
V4L/DVB: V4L: do not autoselect components on embedded systems

Tuner, DVB frontend and video helper chip drivers are by default
autoselected by their respective host cards, this, however, doesn't make
much sense on SoC-based systems. Disable autoselection on EMBEDDED
systems.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: soc-camera: prohibit S_CROP, if internal G_CROP has failed
Guennadi Liakhovetski [Thu, 5 Aug 2010 22:23:44 +0000 (19:23 -0300)]
V4L/DVB: soc-camera: prohibit S_CROP, if internal G_CROP has failed

There is no sense in trying to set cropping if we cannot get current one
from the host driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - zc3xx: Redefine the exchanges of sensor mt9v111 (mi0360soc)
Jean-François Moine [Wed, 4 Aug 2010 10:25:12 +0000 (07:25 -0300)]
V4L/DVB: gspca - zc3xx: Redefine the exchanges of sensor mt9v111 (mi0360soc)

The exchanges for sensor mt9v111 are different with bridges zc301 and zc303.
The exchanges for the bridge zc303 were those of the bad named tas5130ck.
These mt9v111 exchanges have been adjusted from the ms-Windows public files
vm30x.inf (for 0ac8:301b) and usbvm303.inf (for 0ac8:303b).

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - zc3xx: Add the light frequency control for sensor hv7131r
Jean-François Moine [Wed, 4 Aug 2010 10:12:57 +0000 (07:12 -0300)]
V4L/DVB: gspca - zc3xx: Add the light frequency control for sensor hv7131r

The new exchanges are extracted from the public file lPEPI264v.inf of the
ms-Windows driver. In this file, the sensor is named hv7131b but the exchanges
are those of the hv7131r.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - zc3xx: Possible use of the highest alternate setting
Jean-François Moine [Wed, 4 Aug 2010 09:08:52 +0000 (06:08 -0300)]
V4L/DVB: gspca - zc3xx: Possible use of the highest alternate setting

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - zc3xx: Do the sensor probe at resume time
Jean-François Moine [Wed, 4 Aug 2010 09:07:23 +0000 (06:07 -0300)]
V4L/DVB: gspca - zc3xx: Do the sensor probe at resume time

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - zc3xx: Check the USB exchanges
Jean-François Moine [Wed, 4 Aug 2010 08:44:13 +0000 (05:44 -0300)]
V4L/DVB: gspca - zc3xx: Check the USB exchanges

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - zc3xx: Cleanup source
Jean-François Moine [Wed, 4 Aug 2010 08:11:23 +0000 (05:11 -0300)]
V4L/DVB: gspca - zc3xx: Cleanup source

- use an enum to define the sensor numbers
- use the sensor numbers to index the associated tables
- rename TAS5130CXX to TAS5130C
- rename HV7131C to HV7131R
- change some comments

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - main: Fix a crash in gspca_frame_add()
Jean-François Moine [Thu, 29 Jul 2010 05:46:02 +0000 (02:46 -0300)]
V4L/DVB: gspca - main: Fix a crash in gspca_frame_add()

Some webcams as ov511 may find many times an end of image.
In this case, with the last patch in image concatenation
(commit 799b1bd41f398054d46fd35f73abd01c4009f6ca),
the image pointer was NULL and the system crashed in memcpy().

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: v4l: Add driver for Samsung S5P SoC video postprocessor
Sylwester Nawrocki [Tue, 3 Aug 2010 12:50:29 +0000 (09:50 -0300)]
V4L/DVB: v4l: Add driver for Samsung S5P SoC video postprocessor

This driver exports a video device node per each camera interface/
video postprocessor (FIMC) device contained in Samsung S5P SoC series.
The driver is based on v4l2-mem2mem framework.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: uvcvideo: Add support for Miricle 307K thermal webcam
Laurent Pinchart [Tue, 3 Aug 2010 14:18:01 +0000 (11:18 -0300)]
V4L/DVB: uvcvideo: Add support for Miricle 307K thermal webcam

The camera requires the STREAM_NO_FID quirk. Add a corresponding entry
in the device IDs list.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: uvcvideo: Drop corrupted compressed frames
Laurent Pinchart [Thu, 17 Jun 2010 09:52:37 +0000 (06:52 -0300)]
V4L/DVB: uvcvideo: Drop corrupted compressed frames

Corrupted video frames are dropped by default by the driver for
uncompressed formats. Data corruption is not less problematic for
compressed formats, so frame drop should be enabled by default for those
formats as well.

Mark buffers as faulty when an isochronous packet loss is detected for
any format, or when the buffer length doesn't match the image size for
uncompressed formats. Drop erroneous buffers regardless of whether the
format is compressed or uncompressed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR keymap: Add print button for HP OEM version of MCE remote
Andy Walls [Sat, 31 Jul 2010 17:23:04 +0000 (14:23 -0300)]
V4L/DVB: IR keymap: Add print button for HP OEM version of MCE remote

This patch adds a defintion for the "Print" button found on HP OEM
versions of the MCE remote.  All of the other keys found on the HP OEM
version of the remote match the other keys as already defined.

Because, who doesn't need "remote printing", while one is sitting on the
couch across from one's PC? ;)

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: Port ene driver to new IR subsystem and enable it
Maxim Levitsky [Sat, 31 Jul 2010 14:59:26 +0000 (11:59 -0300)]
V4L/DVB: IR: Port ene driver to new IR subsystem and enable it

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: STAGING: remove lirc_ene0100 driver
Maxim Levitsky [Sat, 31 Jul 2010 14:59:25 +0000 (11:59 -0300)]
V4L/DVB: STAGING: remove lirc_ene0100 driver

Add latest unported version of this driver to media/IR.
Next patch will port it to ir core.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: report unknown scancodes the in-kernel decoders found
Maxim Levitsky [Sat, 31 Jul 2010 14:59:24 +0000 (11:59 -0300)]
V4L/DVB: IR: report unknown scancodes the in-kernel decoders found

This way it is possible to use evtest to create keymap for unknown remote.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: extend interfaces to support more device settings
Maxim Levitsky [Sat, 31 Jul 2010 14:59:23 +0000 (11:59 -0300)]
V4L/DVB: IR: extend interfaces to support more device settings

LIRC: add new IOCTL that enables learning mode (wide band receiver)
Still missing features: carrier report & timeout reports.
Will need to pack these into ir_raw_event

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: add helper function for hardware with small o/b buffer
Maxim Levitsky [Sat, 31 Jul 2010 14:59:22 +0000 (11:59 -0300)]
V4L/DVB: IR: add helper function for hardware with small o/b buffer

Some ir input devices have small buffer, and interrupt the host
each time it is full (or half full)

Add a helper that automaticly handles timeouts, and also
automaticly merges samples of same time (space-space)
Such samples might be placed by hardware because size of
sample in the buffer is small (a byte for example).

Also remove constness from ir_dev_props, because it now contains timeout
settings that driver might want to change

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: Allow not to compile keymaps in
Maxim Levitsky [Sat, 31 Jul 2010 14:59:21 +0000 (11:59 -0300)]
V4L/DVB: IR: Allow not to compile keymaps in

Currently, ir device registration fails if keymap requested by driver is not found.
Fix that by always compiling in the empty keymap, and using it as a failback.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: NECX: support repeat
Maxim Levitsky [Sat, 31 Jul 2010 14:59:20 +0000 (11:59 -0300)]
V4L/DVB: IR: NECX: support repeat

This adds support for repeat detecting for NECX variant
Tested with uneversal remote

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: nec decoder: fix repeat
Maxim Levitsky [Sat, 31 Jul 2010 14:59:19 +0000 (11:59 -0300)]
V4L/DVB: IR: nec decoder: fix repeat

Repeat space is 4 units, not 8.
Current code would never trigger a repeat.

However that isn't true for NECX, so repeat there
must be handled differently.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: JVC: make repeat work
Maxim Levitsky [Sat, 31 Jul 2010 14:59:18 +0000 (11:59 -0300)]
V4L/DVB: IR: JVC: make repeat work

Currently, jvc decoder will attempt misdetect next press as a repeat
of last keypress, therefore second keypress isn't detected.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: replace workqueue with kthread
Maxim Levitsky [Sat, 31 Jul 2010 14:59:17 +0000 (11:59 -0300)]
V4L/DVB: IR: replace workqueue with kthread

It is perfectly possible to have ir_raw_event_work
running concurently on two cpus, thus we must protect
it from that situation.

This stems from the fact that if hardware sends short packets of samples
we might end up queueing the work item more times that nessesary.

Such job isn't well suited for a workqueue, so use a kernel thread.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: replace spinlock with mutex
Maxim Levitsky [Sat, 31 Jul 2010 14:59:16 +0000 (11:59 -0300)]
V4L/DVB: IR: replace spinlock with mutex

Some handlers (lirc for example) allocates memory on initialization,
doing so in atomic context is cumbersome.
Fixes warning about sleeping function in atomic context.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: minor fixes
Maxim Levitsky [Sat, 31 Jul 2010 14:59:15 +0000 (11:59 -0300)]
V4L/DVB: IR: minor fixes

* lirc: Don't propagate reset event to userspace
* lirc: Remove strange logic from lirc that would make first sample always be pulse
* Make TO_US macro actualy print what it should.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: Kconfig fixes
Maxim Levitsky [Sat, 31 Jul 2010 14:59:14 +0000 (11:59 -0300)]
V4L/DVB: IR: Kconfig fixes

Move IR drives below separate menu.
This allows to disable them.
Also correct a typo.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR: put newly ported streamzap driver in proper home
Jarod Wilson [Mon, 2 Aug 2010 18:46:03 +0000 (15:46 -0300)]
V4L/DVB: IR: put newly ported streamzap driver in proper home

Moves drivers/staging/lirc/lirc_streamzap.c to
drivers/media/IR/streamzap.c, along with making the requisite Kconfig
and Makefile changes.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: staging/lirc: port lirc_streamzap to ir-core
Jarod Wilson [Tue, 3 Aug 2010 04:07:04 +0000 (01:07 -0300)]
V4L/DVB: staging/lirc: port lirc_streamzap to ir-core

This ports lirc_streamzap.c over to ir-core in-place, to be followed by
a patch moving the driver over to drivers/media/IR/streamzap.c and
enabling the proper Kconfig bits.

Presently, the in-kernel keymap doesn't work, as the stock Streamzap
remote uses an RC-5-like, but not-quite-RC-5 protocol, which the
in-kernel RC-5 decoder doesn't cope with. The remote can be used right
now with the lirc bridge driver though, and other remotes (at least an
RC-6(A) MCE remote) work perfectly with the driver.

I'll take a look at making the existing RC-5 decoder cope with this odd
duck, possibly implement another standalone decoder engine, or just
throw up my hands and say "meh, use lirc"... But the driver itself
should be perfectly sound.

Remaining items on the streamzap TODO list:
- add LIRC_SET_REC_TIMEOUT-alike support
- add LIRC_GET_M{AX,IN}_TIMEOUT-alike support
- add LIRC_GET_REC_RESOLUTION-alike support

All of the above should be trivial to add. There are patches pending to
add this support to ir-core from Maxim Levitsky, and I'll take care of
these once his patches get integrated. None of them are currently
essential though.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR/mceusb: less generic callback name and remove cruft
Jarod Wilson [Mon, 2 Aug 2010 21:21:06 +0000 (18:21 -0300)]
V4L/DVB: IR/mceusb: less generic callback name and remove cruft

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: staging/lirc: fix non-CONFIG_MODULES build horkage
Jarod Wilson [Thu, 29 Jul 2010 21:20:44 +0000 (18:20 -0300)]
V4L/DVB: staging/lirc: fix non-CONFIG_MODULES build horkage

Fix when CONFIG_MODULES is not enabled:

drivers/staging/lirc/lirc_parallel.c:243: error: implicit declaration of function 'module_refcount'
drivers/staging/lirc/lirc_it87.c:150: error: implicit declaration of function 'module_refcount'
drivers/built-in.o: In function `it87_probe':
lirc_it87.c:(.text+0x4079b0): undefined reference to `init_chrdev'
lirc_it87.c:(.text+0x4079cc): undefined reference to `drop_chrdev'
drivers/built-in.o: In function `lirc_it87_exit':
lirc_it87.c:(.exit.text+0x38a5): undefined reference to `drop_chrdev'

Its a quick hack and untested beyond building, since I don't have the
hardware, but it should do the trick.

Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: staging/lirc: fix Kconfig dependencies
Janne Grunau [Thu, 29 Jul 2010 15:24:22 +0000 (12:24 -0300)]
V4L/DVB: staging/lirc: fix Kconfig dependencies

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR/mceusb: remove bad ir_input_dev use
Jarod Wilson [Thu, 29 Jul 2010 21:34:52 +0000 (18:34 -0300)]
V4L/DVB: IR/mceusb: remove bad ir_input_dev use

The ir_input_dev gets filled in by __ir_input_register, the one
allocated in mceusb_init_input_dev was being overwritten by the correct
one shortly after it was initialized (ultimately resulting in a memory
leak). This bug was inherited from imon.c, and was pointed out to me by
Maxim Levitsky.

v2: fix incorrect dev arg to dev_dbg

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR/imon: remove bad ir_input_dev use
Jarod Wilson [Wed, 28 Jul 2010 01:29:44 +0000 (22:29 -0300)]
V4L/DVB: IR/imon: remove bad ir_input_dev use

The ir_input_dev gets filled in by __ir_input_register, the one
allocated in imon_init_idev was being overwritten by the correct one
shortly after it was initialized (ultimately resulting in a memory
leak). Additionally, there was an ill-advised memcpy into that
extraneous ir_input_dev which gets fixed by this.

Ill-advised memcpy pointed out by Dmitry Torokhov, bad usage of
ir_input_dev pointed out by Maxim Levitsky.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: IR/imon: remove incorrect calls to input_free_device
Jarod Wilson [Mon, 26 Jul 2010 14:11:36 +0000 (11:11 -0300)]
V4L/DVB: IR/imon: remove incorrect calls to input_free_device

Per Dmitry Torokhov, following input_unregister_device with an
input_free_device is forbidden, the former is sufficient alone.

Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: v4l2_subdev: Get rid of now unused IR pulse width defines
Andy Walls [Sun, 1 Aug 2010 05:36:20 +0000 (02:36 -0300)]
V4L/DVB: v4l2_subdev: Get rid of now unused IR pulse width defines

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885, cx25840: Change IR measurment records to use struct ir_raw_event
Andy Walls [Sun, 1 Aug 2010 05:18:13 +0000 (02:18 -0300)]
V4L/DVB: cx23885, cx25840: Change IR measurment records to use struct ir_raw_event

The CX23885 and CX25840 modules were using their own simple
IR pulse width measurement record type which required conversion
when passing to the new IR core.  This change makes that record type
consistent with the new IR core and removes a data conversion.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885, cx25840: Report the actual length of an IR Rx timeout event
Andy Walls [Sun, 1 Aug 2010 02:28:37 +0000 (23:28 -0300)]
V4L/DVB: cx23885, cx25840: Report the actual length of an IR Rx timeout event

Instead of reporting an IR Rx timeout event as a ridiculously
long space, report it as a space of the lenght of the timeout.

This partially fixes operation with LIRC without breaking
interoperation with the in kernel decoders.  The gaps lengths
reported to LIRC are still not real however.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885, cx25840: Report IR max pulse width regardless of mod/demod use
Andy Walls [Sun, 1 Aug 2010 00:57:42 +0000 (21:57 -0300)]
V4L/DVB: cx23885, cx25840: Report IR max pulse width regardless of mod/demod use

Compute and report the maximum IR pulse measurment width, even
if we are set to perform carrier modulation or demodulation and
the number is fixed by the carrier freq.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: Change Kconfig dependencies to new IR_CORE functions
Andy Walls [Thu, 29 Jul 2010 02:48:24 +0000 (23:48 -0300)]
V4L/DVB: cx23885: Change Kconfig dependencies to new IR_CORE functions

This driver no longer depends on the old IR functions selected by
VIDEO_IR.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: Require user to explicitly enable CX2388[57] IR via module param
Andy Walls [Tue, 20 Jul 2010 00:22:05 +0000 (21:22 -0300)]
V4L/DVB: cx23885: Require user to explicitly enable CX2388[57] IR via module param

The CX23885 IR controller was reported to cause an interrupt storm
on a TeVii S470 card, but was reported fine on an HVR-1250.  Keep
integrated IR disabled by default on CX2388[57] based cards to avoid
a bad user experience in the general case.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: Move AV Core irq handling to a work handler
Andy Walls [Mon, 19 Jul 2010 04:35:46 +0000 (01:35 -0300)]
V4L/DVB: cx23885: Move AV Core irq handling to a work handler

Interrupts from the AV Core are best handled by a workqueue handler
since many I2C transactions are required to service the AV Core
interrupt.  The AV_CORE PCI interrupt is disabled by the IRQ handler
and reenabled when the work handler is finished.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: Protect PCI interrupt mask manipulations with a spinlock
Andy Walls [Mon, 19 Jul 2010 04:19:43 +0000 (01:19 -0300)]
V4L/DVB: cx23885: Protect PCI interrupt mask manipulations with a spinlock

This patch encapsulates access to the PCI_INT_MSK register and
dev->pci_irqmask variable and protects them with a spinlock.
This is needed because both the hard IRQ handler and a workhandler
will need to manipulate the mask to disable the AV_CORE interrupt.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: Add preliminary IR Rx support for the HVR-1250 and TeVii S470
Andy Walls [Mon, 19 Jul 2010 03:41:41 +0000 (00:41 -0300)]
V4L/DVB: cx23885: Add preliminary IR Rx support for the HVR-1250 and TeVii S470

Add initial IR Rx support using the intergrated IR controller in the
A/V core of the CX23885 bridge chip.

This initial support is flawed in that I2C transactions should not
be performed in a hard irq context.  That will be fixed in a
follow on patch.

The TeVii S470 support is reported to generate perptual interrupts
that renders a user' system nearly unusable.  The TeVii S470 IR
will be disabled by default in a follow on patch.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: Add a v4l2_subdev group id for the CX2388[578] integrated AV core
Andy Walls [Mon, 19 Jul 2010 02:26:29 +0000 (23:26 -0300)]
V4L/DVB: cx23885: Add a v4l2_subdev group id for the CX2388[578] integrated AV core

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx25840: Add support for CX2388[57] A/V core integrated IR controllers
Andy Walls [Mon, 19 Jul 2010 01:08:03 +0000 (22:08 -0300)]
V4L/DVB: cx25840: Add support for CX2388[57] A/V core integrated IR controllers

This patch is primarily a port of the integrated IR controller code in
cx23885/cx23888-ir.c.  Right now, only the CX2388[57] AV core will
really try to set up IR. This IR support, by design, still requires the
bridge driver to do final IO pin mux configuration and setup of the IR
controller parameters.

For the CX2388[578] chips, enabling the AV Core for IR also starts
sending Audio and Video interrupts to the bridge driver.  For
CX2388[578] chips audio and video interrupts are ignored and
acknowledged when they happen.

IR interrupt handling and status logging is exluded for the CX23888
which does not have an IR controller on the AV core.

Note that experimentation reveals that the IR irq enables on the
CX23885 have an inverted logic sense.  The CX23887 likely suffers from
the same quirk.  For these chips, those irq enable bits are handled
as interrupt disables.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: v4l2_subdev: Move interrupt_service_routine ptr to v4l2_subdev_core_ops
Andy Walls [Sun, 18 Jul 2010 23:54:52 +0000 (20:54 -0300)]
V4L/DVB: v4l2_subdev: Move interrupt_service_routine ptr to v4l2_subdev_core_ops

The CX2584x and related cores are multifunction subdevices with a number
of internal blocks that act as interrupt sources.  Move the v4L2_subdev
interrupt_service_routine callback from v4l_subdev_ir_ops to
v4l2_subdev_core_ops, as the video and audio blocks of a CX2584x and
related cores can generate interrupts along with the IR block.  This
change also makes sense for other subdev's that generate interrupts and
do not have an IR block.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: For CX23888 IR, configure the IO pin mux IR pins explcitly
Andy Walls [Sun, 18 Jul 2010 23:26:37 +0000 (20:26 -0300)]
V4L/DVB: cx23885: For CX23888 IR, configure the IO pin mux IR pins explcitly

Explicitly configure the IR Tx and IR Rx pins to be driven by the
IR Rx and Tx pads from the AV core for CX23888 IR.

For the HVR-1850 and HVR-1290 configure the IR Tx level inversion,
so the Tx LED is off when idle.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: v4l2_subdev, cx23885: Differentiate IR carrier sense and I/O pin inversion
Andy Walls [Sun, 18 Jul 2010 22:57:25 +0000 (19:57 -0300)]
V4L/DVB: v4l2_subdev, cx23885: Differentiate IR carrier sense and I/O pin inversion

There is a distinction on IR Tx for the CX2388[578] chips of carrier
sense inversion (space is a carrier burst and mark is no burst) and I/O
pin level inversion (0 is high output level, 1 is low output level).
Allow the caller to set these parameters distinctly as v4l2_subdevice
IR parameters.  This permits the IR device to be configured and enabled
without the IR Tx LED being on during idle/space time due to an external
hardware level inversion

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx25840: Add s_io_pin_config core subdev ops for the CX2388[578]
Andy Walls [Sun, 18 Jul 2010 22:39:54 +0000 (19:39 -0300)]
V4L/DVB: cx25840: Add s_io_pin_config core subdev ops for the CX2388[578]

Add s_io_pin_config core subdev op for the CX2388[578] AV cores.
This is complete for IR_RX, IR_TX, GPIOs 16,19-23, and IRQ_N.
It likely needs work for the I2S signal direction.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: v4l2_subdev: Add s_io_pin_config to v4l2_subdev_core_ops
Andy Walls [Sun, 18 Jul 2010 21:51:10 +0000 (18:51 -0300)]
V4L/DVB: v4l2_subdev: Add s_io_pin_config to v4l2_subdev_core_ops

Add a method to v4l2_sudev_core_ops to allow bridge drivers to
manage what signal pads/functions are routed out to multiplexed IO pins on a
pin by pin basis.  The interface also allows specifying initial output settings
for pins and disabling an IO pin altogether.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: Add a VIDIOC_LOG_STATUS ioctl function for analog video devices
Andy Walls [Sun, 18 Jul 2010 21:18:06 +0000 (18:18 -0300)]
V4L/DVB: cx23885: Add a VIDIOC_LOG_STATUS ioctl function for analog video devices

Add a simple log_status function for raw analog video capture device nodes,
to provide insight into the state of the CX2388[578] A/V decoder core.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: Add correct detection of the HVR-1250 model 79501
Andy Walls [Sun, 18 Jul 2010 20:35:00 +0000 (17:35 -0300)]
V4L/DVB: cx23885: Add correct detection of the HVR-1250 model 79501

The offset in the eeprom data for the 79501 version of the HVR-1250 is at 0xc0
vs. the standard 0x80.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx25840: Make cx25840 i2c register read transactions atomic
Andy Walls [Sun, 18 Jul 2010 20:16:16 +0000 (17:16 -0300)]
V4L/DVB: cx25840: Make cx25840 i2c register read transactions atomic

There was a small window between writing the cx25840 register
address over the i2c bus and reading the register contents back from the
cx25840 device that the i2c adapter lock was released.  This change ensures the
adapter lock is not released until the register read is done.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: i2c_wait_done returns 0 or 1, don't check for < 0 return value
Jean Delvare [Sun, 18 Jul 2010 20:05:17 +0000 (17:05 -0300)]
V4L/DVB: cx23885: i2c_wait_done returns 0 or 1, don't check for < 0 return value

Function i2c_wait_done() never returns negative values, so there is no
point in checking for them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: Check for slave nack on all transactions
Jean Delvare [Sun, 18 Jul 2010 19:52:05 +0000 (16:52 -0300)]
V4L/DVB: cx23885: Check for slave nack on all transactions

Don't just check for nacks on zero-length transactions. Check on
other transactions too.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: cx23885: Return -ENXIO on slave nack
Jean Delvare [Sun, 18 Jul 2010 19:48:47 +0000 (16:48 -0300)]
V4L/DVB: cx23885: Return -ENXIO on slave nack

Documentation/i2c/fault-codes says that i2c adapter drivers should
return -ENXIO when no slave acks an address byte.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - vc032x: Force main register write at probe time (poxxxx)
Jean-François Moine [Tue, 27 Jul 2010 08:34:49 +0000 (05:34 -0300)]
V4L/DVB: gspca - vc032x: Force main register write at probe time (poxxxx)

On laptops, the webcam sometimes disconnects when writing the first main
register (b300). This patch prevents the creation of a new /dev/video<n>
on streaming start.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - vc032x: Do sensor probe at resume time
Jean-François Moine [Mon, 26 Jul 2010 10:59:23 +0000 (07:59 -0300)]
V4L/DVB: gspca - vc032x: Do sensor probe at resume time

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - vc032x: Add more controls for poxxxx
Jean-François Moine [Mon, 26 Jul 2010 10:53:57 +0000 (07:53 -0300)]
V4L/DVB: gspca - vc032x: Add more controls for poxxxx

The added controls are exposure, gain, autogain and backlight compensation.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - sq930x: Cleanup source, add comments
Jean-François Moine [Mon, 26 Jul 2010 10:27:13 +0000 (07:27 -0300)]
V4L/DVB: gspca - sq930x: Cleanup source, add comments

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - sq930x: Change the horizontal blanking of sensor mt9v111
Jean-François Moine [Mon, 26 Jul 2010 10:25:44 +0000 (07:25 -0300)]
V4L/DVB: gspca - sq930x: Change the horizontal blanking of sensor mt9v111

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - sq930x: Change image format to Bayer mode
Jean-François Moine [Mon, 26 Jul 2010 10:23:00 +0000 (07:23 -0300)]
V4L/DVB: gspca - sq930x: Change image format to Bayer mode

The JPEG format did not work fine. The Bayer format offers correct VGA (640x480)
resolution, but bad QQVGA (160x120). This last resolution is removed.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - sq930x: Change the default values of gain and exposure
Jean-François Moine [Mon, 26 Jul 2010 10:09:32 +0000 (07:09 -0300)]
V4L/DVB: gspca - sq930x: Change the default values of gain and exposure

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - sq930x: Change the gain value for Micron sensors
Jean-François Moine [Mon, 26 Jul 2010 09:58:18 +0000 (06:58 -0300)]
V4L/DVB: gspca - sq930x: Change the gain value for Micron sensors

The bit 7 of the sensor gain register multiplies the 7bits value by two.
It is now always set with half the user gain value.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - sq930x: Bad init sequence for sensor mt9v111
Jean-François Moine [Mon, 26 Jul 2010 09:50:31 +0000 (06:50 -0300)]
V4L/DVB: gspca - sq930x: Bad init sequence for sensor mt9v111

The start_1 exchange must be done by (reg, val) * 5 and not 8.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - main: Version change
Jean-François Moine [Mon, 26 Jul 2010 09:47:35 +0000 (06:47 -0300)]
V4L/DVB: gspca - main: Version change

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoV4L/DVB: gspca - sonixj / sq930x / t613: Remove unused variable in struct sd
Jean-François Moine [Mon, 26 Jul 2010 09:39:40 +0000 (06:39 -0300)]
V4L/DVB: gspca - sonixj / sq930x / t613: Remove unused variable in struct sd

The sensor enum definition was not at the right place.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Linus Torvalds [Sun, 8 Aug 2010 17:10:11 +0000 (10:10 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: check kmalloc() result
  arch/tile: catch up on various minor cleanups.
  arch/tile: avoid erroneous error return for PTRACE_POKEUSR.
  tile: set ARCH_KMALLOC_MINALIGN
  tile: remove homegrown L1_CACHE_ALIGN macro
  arch/tile: Miscellaneous cleanup changes.
  arch/tile: Split the icache flush code off to a generic <arch> header.
  arch/tile: Fix bug in support for atomic64_xx() ops.
  arch/tile: Shrink the tile-opcode files considerably.
  arch/tile: Add driver to enable access to the user dynamic network.
  arch/tile: Enable more sophisticated IRQ model for 32-bit chips.
  Move list types from <linux/list.h> to <linux/types.h>.
  Add wait4() back to the set of <asm-generic/unistd.h> syscalls.
  Revert adding some arch-specific signal syscalls to <linux/syscalls.h>.
  arch/tile: Do not use GFP_KERNEL for dma_alloc_coherent(). Feedback from fujita.tomonori@lab.ntt.co.jp.
  arch/tile: core support for Tilera 32-bit chips.
  Fix up the "generic" unistd.h ABI to be more useful.

14 years agoMerge branch 'for-linus' of git://www.jni.nu/cris
Linus Torvalds [Sun, 8 Aug 2010 17:08:26 +0000 (10:08 -0700)]
Merge branch 'for-linus' of git://www.jni.nu/cris

* 'for-linus' of git://www.jni.nu/cris: (51 commits)
  CRIS: Fix alignment problem for older ld
  CRIS: Always dump registers for segfaulting process.
  CRIS: Add config for pausing a seg-faulting process
  CRIS: Don't take faults while in_atomic
  CRIS: Fixup lookup for delay slot faults
  CRIS: Discard exit.text and .data at runtime
  CRIS: Add cache aligned and read mostly data sections
  CRIS: Return something from profile write
  CRIS: Add ARTPEC-3 and timestamps for sync-serial
  CRIS: Better ARTPEC-3 support for gpio
  CRIS: Add include guard
  CRIS: Better handling of pinmux settings
  CRIS: New DMA defines for ARTPEC-3
  CRIS: __do_strncpy_from_user: Don't read the byte beyond the nil
  CRIS: Pagetable for ARTPEC-3
  CRIS: Machine dependent memmap.h
  CRIS: Check if pointer is set before using it
  CRIS: Machine dependent dma.h
  CRIS: Define __read_mostly for CRISv32
  CRIS: Discard .note.gnu.build-id section
  ...

14 years agoMerge branch 'for-linus' of git://android.kernel.org/kernel/tegra
Linus Torvalds [Sun, 8 Aug 2010 17:05:57 +0000 (10:05 -0700)]
Merge branch 'for-linus' of git://android.kernel.org/kernel/tegra

* 'for-linus' of git://android.kernel.org/kernel/tegra:
  [ARM] tegra: add MAINTAINERS entry
  [ARM] tegra: harmony: Add harmony board file
  [ARM] tegra: add pinmux support
  [ARM] tegra: add GPIO support
  [ARM] tegra: Add timer support
  [ARM] tegra: SMP support
  [ARM] tegra: Add clock support
  [ARM] tegra: Add IRQ support
  [ARM] tegra: initial tegra support

14 years agoMerge branch 'for-linus' of git://github.com/schandinat/linux-2.6
Linus Torvalds [Sun, 8 Aug 2010 17:04:17 +0000 (10:04 -0700)]
Merge branch 'for-linus' of git://github.com/schandinat/linux-2.6

* 'for-linus' of git://github.com/schandinat/linux-2.6:
  drivers/video/via/via-gpio.c: fix warning
  viafb: Depends on X86
  fbdev: section cleanup in viafb driver
  viafb: fix accel_flags check_var bug
  viafb: probe cleanups
  viafb: remove ioctls which break the framebuffer interface
  viafb: update fix before calculating depth
  viafb: PLL value cleanup
  viafb: simplify lcd size "detection"
  viafb: fix PCI table
  viafb: add lcd scaling support for some IGPs
  viafb: improve lcd code readability
  viafb: remove duplicated scaling code
  MAINTAINERS: update viafb entry

14 years agoMerge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux
Linus Torvalds [Sun, 8 Aug 2010 17:02:59 +0000 (10:02 -0700)]
Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (64 commits)
  OMAP: DSS2: OMAPFB: add support for FBIO_WAITFORVSYNC
  OMAP: DSS2: Replace strncmp() with sysfs_streq() in overlay_manager_store()
  OMAP: DSS2: Fix error path in omap_dsi_update()
  OMAP: DSS2: TDO35S: fix video signaling
  OMAP: DSS2: OMAPFB: Fix invalid bpp for PAL and NTSC modes
  OMAP: DSS2: OMAPFB: Fix probe error path
  OMAP3EVM: Replace vdvi regulator supply with vdds_dsi
  OMAP: DSS2: Remove extra return statement
  OMAP: DSS2: adjust YUV overlay width to be even
  OMAP: DSS2: OMAPFB: Fix sysfs mirror input check
  OMAP: DSS2: OMAPFB: Remove redundant color register range check
  OMAP: DSS2: OMAPFB: Remove redundant rotate range check
  OMAP: DSS2: OMAPFB: Check fb2display() return value
  OMAP: DSS2: Taal: Optimize enable_te, rotate, mirror when value unchanged
  OMAP: DSS2: DSI: detect unsupported update requests
  OMAP: DSS2: DSI: increase FIFO low threshold
  OMAP: DSS2: DSI: Add error IRQ mask for DSI complexIO
  OMAP: DSS2: DSI: Remove BTA after set_max_rx_packet_size
  OMAP: DSS2: change manual update scaling setup
  OMAP: DSS2: DSI: use BTA to end the frame transfer
  ...

14 years agoMerge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind...
Linus Torvalds [Sun, 8 Aug 2010 17:01:46 +0000 (10:01 -0700)]
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (143 commits)
  omap: mailbox: reorganize headers
  omap: mailbox: standarize on 'omap-mailbox'
  omap: mailbox: only compile for configured archs
  omap: mailbox: simplify omap_mbox_register()
  omap: mailbox: reorganize registering
  omap: mailbox: add IRQ names
  omap: mailbox: remove unecessary fields
  omap: mailbox: don't export unecessary symbols
  omap: mailbox: update omap1 probing
  omap: mailbox: use correct config for omap1
  omap: mailbox: 2420 should be detected at run-time
  omap: mailbox: reorganize structures
  omap: mailbox: trivial cleanups
  omap mailbox: Set a device in logical mbox instance for traceability
  omap: mailbox: convert block api to kfifo
  omap: mailbox: remove (un)likely macros from cold paths
  omap: mailbox cleanup: split MODULE_AUTHOR line
  omap: mailbox: convert rwlocks to spinlock
  Mailbox: disable mailbox interrupt when request queue
  Mailbox: new mutext lock for h/w mailbox configuration
  ...

14 years agoMerge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 8 Aug 2010 17:00:55 +0000 (10:00 -0700)]
Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci

* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci:
  davinci: dm646x EVM: Specify reserved EDMA channel/slots
  davinci: da8xx/omapl EVM: Specify reserved channels/slots
  davinci: support for EDMA resource sharing
  davinci: edma: provide ability to detect insufficient CC info data
  davinci: da8xx: sparse cleanup: remove duplicate entries in irq priorities
  davinci: DM365: fixed second serial port
  Davinci: tnetv107x evm board initial support
  Davinci: tnetv107x initial gpio support
  Davinci: tnetv107x soc support
  Davinci: tnetv107x decompresser uart definitions
  Davinci: generalized debug macros

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Sun, 8 Aug 2010 00:09:24 +0000 (17:09 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (82 commits)
  firewire: core: add forgotten dummy driver methods, remove unused ones
  firewire: add isochronous multichannel reception
  firewire: core: small clarifications in core-cdev
  firewire: core: remove unused code
  firewire: ohci: release channel in error path
  firewire: ohci: use memory barriers to order descriptor updates
  tools/firewire: nosy-dump: increment program version
  tools/firewire: nosy-dump: remove unused code
  tools/firewire: nosy-dump: use linux/firewire-constants.h
  tools/firewire: nosy-dump: break up a deeply nested function
  tools/firewire: nosy-dump: make some symbols static or const
  tools/firewire: nosy-dump: change to kernel coding style
  tools/firewire: nosy-dump: work around segfault in decode_fcp
  tools/firewire: nosy-dump: fix it on x86-64
  tools/firewire: add userspace front-end of nosy
  firewire: nosy: note ioctls in ioctl-number.txt
  firewire: nosy: use generic printk macros
  firewire: nosy: endianess fixes and annotations
  firewire: nosy: annotate __user pointers and __iomem pointers
  firewire: nosy: fix device shutdown with active client
  ...

14 years agoMerge branch 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Sun, 8 Aug 2010 00:08:30 +0000 (17:08 -0700)]
Merge branch 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits)
  ACPI / ACPICA: Simplify acpi_ev_initialize_gpe_block()
  ACPI / ACPICA: Fail acpi_gpe_wakeup() if ACPI_GPE_CAN_WAKE is unset
  ACPI / ACPICA: Do not execute _PRW methods during initialization
  ACPI: Fix bogus GPE test in acpi_bus_set_run_wake_flags()
  ACPICA: Update version to 20100702
  ACPICA: Fix for Alias references within Package objects
  ACPICA: Fix lint warning for 64-bit constant
  ACPICA: Remove obsolete GPE function
  ACPICA: Update debug output components
  ACPICA: Add support for WDDT - Watchdog Descriptor Table
  ACPICA: Drop acpi_set_gpe
  ACPICA: Use low-level GPE enable during GPE block initialization
  ACPI / EC: Do not use acpi_set_gpe
  ACPI / EC: Drop suspend and resume routines
  ACPICA: Remove wakeup GPE reference counting which is not used
  ACPICA: Introduce acpi_gpe_wakeup()
  ACPICA: Rename acpi_hw_gpe_register_bit
  ACPICA: Update version to 20100528
  ACPICA: Add signatures for undefined tables: ATKG, GSCI, IEIT
  ACPICA: Optimization: Reduce the number of namespace walks
  ...

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Sun, 8 Aug 2010 00:08:02 +0000 (17:08 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits)
  IB/qib: Add missing <linux/slab.h> include
  IB/ehca: Drop unnecessary NULL test
  RDMA/nes: Fix confusing if statement indentation
  IB/ehca: Init irq tasklet before irq can happen
  RDMA/nes: Fix misindented code
  RDMA/nes: Fix showing wqm_quanta
  RDMA/nes: Get rid of "set but not used" variables
  RDMA/nes: Read firmware version from correct place
  IB/srp: Export req_lim via sysfs
  IB/srp: Make receive buffer handling more robust
  IB/srp: Use print_hex_dump()
  IB: Rename RAW_ETY to RAW_ETHERTYPE
  RDMA/nes: Fix two sparse warnings
  RDMA/cxgb3: Make needlessly global iwch_l2t_send() static
  IB/iser: Make needlessly global iser_alloc_rx_descriptors() static
  RDMA/cxgb4: Add timeouts when waiting for FW responses
  IB/qib: Fix race between qib_error_qp() and receive packet processing
  IB/qib: Limit the number of packets processed per interrupt
  IB/qib: Allow writes to the diag_counters to be able to clear them
  IB/qib: Set cfgctxts to number of CPUs by default
  ...

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sun, 8 Aug 2010 00:07:31 +0000 (17:07 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits)
  ALSA: hda - Add pin-fix for HP dc5750
  ALSA: als4000: Fix potentially invalid DMA mode setup
  ALSA: als4000: enable burst mode
  ALSA: hda - Fix initial capsrc selection in patch_alc269()
  ASoC: TWL4030: Capture route runtime DAPM ordering fix
  ALSA: hda - Add PC-beep whitelist for an Intel board
  ALSA: hda - More relax for pending period handling
  ALSA: hda - Define AC_FMT_* constants
  ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs
  ALSA: hda - Add support for HDMI HBR passthrough
  ALSA: hda - Set Stream Type in Stream Format according to AES0
  ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed
  ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF
  ASoC: wm9081: fix resource reclaim in wm9081_register error path
  ASoC: wm8978: fix a memory leak if a wm8978_register fail
  ASoC: wm8974: fix a memory leak if another WM8974 is registered
  ASoC: wm8961: fix resource reclaim in wm8961_register error path
  ASoC: wm8955: fix resource reclaim in wm8955_register error path
  ASoC: wm8940: fix a memory leak if wm8940_register return error
  ASoC: wm8904: fix resource reclaim in wm8904_register error path
  ...

14 years agoMerge branch 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic...
Linus Torvalds [Sun, 8 Aug 2010 00:06:54 +0000 (17:06 -0700)]
Merge branch 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing

* 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  do_coredump: Do not take BKL
  init: Remove the BKL from startup code

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Sat, 7 Aug 2010 21:28:20 +0000 (14:28 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  SELINUX: Fix build error.

14 years agoMerge branch 'for-2.6.36' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Sat, 7 Aug 2010 21:24:41 +0000 (14:24 -0700)]
Merge branch 'for-2.6.36' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux: (34 commits)
  nfsd4: fix file open accounting for RDWR opens
  nfsd: don't allow setting maxblksize after svc created
  nfsd: initialize nfsd versions before creating svc
  net: sunrpc: removed duplicated #include
  nfsd41: Fix a crash when a callback is retried
  nfsd: fix startup/shutdown order bug
  nfsd: minor nfsd read api cleanup
  gcc-4.6: nfsd: fix initialized but not read warnings
  nfsd4: share file descriptors between stateid's
  nfsd4: fix openmode checking on IO using lock stateid
  nfsd4: miscellaneous process_open2 cleanup
  nfsd4: don't pretend to support write delegations
  nfsd: bypass readahead cache when have struct file
  nfsd: minor nfsd_svc() cleanup
  nfsd: move more into nfsd_startup()
  nfsd: just keep single lockd reference for nfsd
  nfsd: clean up nfsd_create_serv error handling
  nfsd: fix error handling in __write_ports_addxprt
  nfsd: fix error handling when starting nfsd with rpcbind down
  nfsd4: fix v4 state shutdown error paths
  ...

14 years agoAFS: Fix the module init error handling
David Howells [Fri, 6 Aug 2010 16:26:48 +0000 (17:26 +0100)]
AFS: Fix the module init error handling

Fix the module init error handling.  There are a bunch of goto labels for
aborting the init procedure at different points and just undoing what needs
undoing - they aren't all in the right places, however.

This can lead to an oops like the following:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: [<ffffffff81042a31>] destroy_workqueue+0x17/0xc0
...
Modules linked in: kafs(+) dns_resolver rxkad af_rxrpc fscache

Pid: 2171, comm: insmod Not tainted 2.6.35-cachefs+ #319 DG965RY/
...
Process insmod (pid: 2171, threadinfo ffff88003ca6a000, task ffff88003dcc3050)
...
Call Trace:
 [<ffffffffa0055994>] afs_callback_update_kill+0x10/0x12 [kafs]
 [<ffffffffa007d1c5>] afs_init+0x190/0x1ce [kafs]
 [<ffffffffa007d035>] ? afs_init+0x0/0x1ce [kafs]
 [<ffffffff810001ef>] do_one_initcall+0x59/0x14e
 [<ffffffff8105f7ee>] sys_init_module+0x9c/0x1de
 [<ffffffff81001eab>] system_call_fastpath+0x16/0x1b

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge branch 'nfs-for-2.6.36' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Sat, 7 Aug 2010 20:19:36 +0000 (13:19 -0700)]
Merge branch 'nfs-for-2.6.36' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'nfs-for-2.6.36' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (42 commits)
  NFS: NFSv4.1 is no longer a "developer only" feature
  NFS: NFS_V4 is no longer an EXPERIMENTAL feature
  NFS: Fix /proc/mount for legacy binary interface
  NFS: Fix the locking in nfs4_callback_getattr
  SUNRPC: Defer deleting the security context until gss_do_free_ctx()
  SUNRPC: prevent task_cleanup running on freed xprt
  SUNRPC: Reduce asynchronous RPC task stack usage
  SUNRPC: Move the bound cred to struct rpc_rqst
  SUNRPC: Clean up of rpc_bindcred()
  SUNRPC: Move remaining RPC client related task initialisation into clnt.c
  SUNRPC: Ensure that rpc_exit() always wakes up a sleeping task
  SUNRPC: Make the credential cache hashtable size configurable
  SUNRPC: Store the hashtable size in struct rpc_cred_cache
  NFS: Ensure the AUTH_UNIX credcache is allocated dynamically
  NFS: Fix the NFS users of rpc_restart_call()
  SUNRPC: The function rpc_restart_call() should return success/failure
  NFSv4: Get rid of the bogus RPC_ASSASSINATED(task) checks
  NFSv4: Clean up the process of renewing the NFSv4 lease
  NFSv4.1: Handle NFS4ERR_DELAY on SEQUENCE correctly
  NFS: nfs_rename() should not have to flush out writebacks
  ...

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi...
Linus Torvalds [Sat, 7 Aug 2010 20:18:36 +0000 (13:18 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add retrieve request
  fuse: add store request
  fuse: don't use atomic kmap

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Sat, 7 Aug 2010 20:10:55 +0000 (13:10 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (45 commits)
  nilfs2: reject filesystem with unsupported block size
  nilfs2: avoid rec_len overflow with 64KB block size
  nilfs2: simplify nilfs_get_page function
  nilfs2: reject incompatible filesystem
  nilfs2: add feature set fields to super block
  nilfs2: clarify byte offset in super block format
  nilfs2: apply read-ahead for nilfs_btree_lookup_contig
  nilfs2: introduce check flag to btree node buffer
  nilfs2: add btree get block function with readahead option
  nilfs2: add read ahead mode to nilfs_btnode_submit_block
  nilfs2: fix buffer head leak in nilfs_btnode_submit_block
  nilfs2: eliminate inline keywords in btree implementation
  nilfs2: get maximum number of child nodes from bmap object
  nilfs2: reduce repetitive calculation of max number of child nodes
  nilfs2: optimize calculation of min/max number of btree node children
  nilfs2: remove redundant pointer checks in bmap lookup functions
  nilfs2: get rid of nilfs_bmap_union
  nilfs2: unify bmap set_target_v operations
  nilfs2: get rid of nilfs_btree uses
  nilfs2: get rid of nilfs_direct uses
  ...

14 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Sat, 7 Aug 2010 20:03:53 +0000 (13:03 -0700)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: Adding error check after calling ext4_mb_regular_allocator()
  ext4: Fix dirtying of journalled buffers in data=journal mode
  ext4: re-inline ext4_rec_len_(to|from)_disk functions
  jbd2: Remove t_handle_lock from start_this_handle()
  jbd2: Change j_state_lock to be a rwlock_t
  jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop
  ext4: Add mount options in superblock
  ext4: force block allocation on quota_off
  ext4: fix freeze deadlock under IO
  ext4: drop inode from orphan list if ext4_delete_inode() fails
  ext4: check to make make sure bd_dev is set before dereferencing it
  jbd2: Make barrier messages less scary
  ext4: don't print scary messages for allocation failures post-abort
  ext4: fix EFBIG edge case when writing to large non-extent file
  ext4: fix ext4_get_blocks references
  ext4: Always journal quota file modifications
  ext4: Fix potential memory leak in ext4_fill_super
  ext4: Don't error out the fs if the user tries to make a file too big
  ext4: allocate stripe-multiple IOs on stripe boundaries
  ext4: move aio completion after unwritten extent conversion
  ...

Fix up conflicts in fs/ext4/inode.c as per Ted.

Fix up xfs conflicts as per earlier xfs merge.

14 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Sat, 7 Aug 2010 19:57:07 +0000 (12:57 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext3: Fix dirtying of journalled buffers in data=journal mode
  ext3: default to ordered mode
  quota: Use mark_inode_dirty_sync instead of mark_inode_dirty
  quota: Change quota error message to print out disk and function name
  MAINTAINERS: Update entries of ext2 and ext3
  MAINTAINERS: Update address of Andreas Dilger
  ext3: Avoid filesystem corruption after a crash under heavy delete load
  ext3: remove vestiges of nobh support
  ext3: Fix set but unused variables
  quota: clean up quota active checks
  quota: Clean up the namespace in dqblk_xfs.h
  quota: check quota reservation on remove_dquot_ref

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
Linus Torvalds [Sat, 7 Aug 2010 19:56:48 +0000 (12:56 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  fs/dlm: Drop unnecessary null test
  dlm: use genl_register_family_with_ops()

14 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Sat, 7 Aug 2010 19:56:27 +0000 (12:56 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: super.c Fix warning: variable 'sbi' set but not used
  udf: remove duplicated #include

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Sat, 7 Aug 2010 19:54:46 +0000 (12:54 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [DNS RESOLVER] Minor typo correction
  DNS: Fixes for the DNS query module
  cifs: Include linux/err.h for IS_ERR and PTR_ERR
  DNS: Make AFS go to the DNS for AFSDB records for unknown cells
  DNS: Separate out CIFS DNS Resolver code
  cifs: account for new creduid=0x%x parameter in spnego upcall string
  cifs: reduce false positives with inode aliasing serverino autodisable
  CIFS: Make cifs_convert_address() take a const src pointer and a length
  cifs: show features compiled in as part of DebugData
  cifs: update README

Fix up trivial conflicts in fs/cifs/cifsfs.c due to workqueue changes

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Linus Torvalds [Sat, 7 Aug 2010 19:42:58 +0000 (12:42 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
  workqueue: mark init_workqueues() as early_initcall()
  workqueue: explain for_each_*cwq_cpu() iterators
  fscache: fix build on !CONFIG_SYSCTL
  slow-work: kill it
  gfs2: use workqueue instead of slow-work
  drm: use workqueue instead of slow-work
  cifs: use workqueue instead of slow-work
  fscache: drop references to slow-work
  fscache: convert operation to use workqueue instead of slow-work
  fscache: convert object to use workqueue instead of slow-work
  workqueue: fix how cpu number is stored in work->data
  workqueue: fix mayday_mask handling on UP
  workqueue: fix build problem on !CONFIG_SMP
  workqueue: fix locking in retry path of maybe_create_worker()
  async: use workqueue for worker pool
  workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
  workqueue: implement unbound workqueue
  workqueue: prepare for WQ_UNBOUND implementation
  libata: take advantage of cmwq and remove concurrency limitations
  workqueue: fix worker management invocation without pending works
  ...

Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c

14 years agonfsd4: fix file open accounting for RDWR opens
J. Bruce Fields [Sat, 7 Aug 2010 13:21:41 +0000 (09:21 -0400)]
nfsd4: fix file open accounting for RDWR opens

Commit f9d7562fdb9dc0ada3a7aba5dbbe9d965e2a105d "nfsd4: share file
descriptors between stateid's" didn't correctly account for O_RDWR opens.
Symptoms include leaked files, resulting in failures to unmount and/or
warnings about orphaned inodes on reboot.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
14 years agoMerge branch 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 6 Aug 2010 23:25:13 +0000 (16:25 -0700)]
Merge branch 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, xsave: Make xstate_enable_boot_cpu() __init, protect on CPU 0
  x86, xsave: Add __init attribute to setup_xstate_features()
  x86, xsave: Make init_xstate_buf static
  x86, xsave: Check cpuid level for XSTATE_CPUID (0x0d)
  x86, xsave: Introduce xstate enable functions
  x86, xsave: Separate fpu and xsave initialization
  x86, xsave: Move boot cpu initialization to xsave_init()
  x86, xsave: 32/64 bit boot cpu check unification in initialization
  x86, xsave: Do not include asm/i387.h in asm/xsave.h
  x86, xsave: Use xsaveopt in context-switch path when supported
  x86, xsave: Sync xsave memory layout with its header for user handling
  x86, xsave: Track the offset, size of state in the xsave layout

14 years agoMerge branch 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 6 Aug 2010 23:24:51 +0000 (16:24 -0700)]
Merge branch 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Use HW_ERR in MCE handler
  x86, mce: Add HW_ERR printk prefix for hardware error logging
  x86, mce: Fix MSR_IA32_MCI_CTL2 CMCI threshold setup
  x86, mce: Rename MSR_IA32_MCx_CTL2 value

14 years agoMerge branch 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 6 Aug 2010 23:24:34 +0000 (16:24 -0700)]
Merge branch 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, olpc: Constify an olpc_ofw() arg
  x86, olpc: Use pr_debug() for EC commands
  x86, olpc: Add comment about implicit optimization barrier
  x86, olpc: Add support for calling into OpenFirmware

14 years agoMerge branch 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kerne...
Linus Torvalds [Fri, 6 Aug 2010 23:24:17 +0000 (16:24 -0700)]
Merge branch 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, alternatives: BUG on encountering an invalid CPU feature number
  x86, alternatives: Fix one more open-coded 8-bit alternative number
  x86, alternatives: Use 16-bit numbers for cpufeature index

14 years agoMerge branches 'x86-cleanups-for-linus', 'x86-vmware-for-linus', 'x86-mtrr-for-linus...
Linus Torvalds [Fri, 6 Aug 2010 23:22:59 +0000 (16:22 -0700)]
Merge branches 'x86-cleanups-for-linus', 'x86-vmware-for-linus', 'x86-mtrr-for-linus', 'x86-apic-for-linus', 'x86-fpu-for-linus' and 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Clean up arch/x86/kernel/cpu/mtrr/cleanup.c: use ";" not "," to terminate statements

* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, vmware: Preset lpj values when on VMware.

* 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mtrr: Use stop machine context to rendezvous all the cpu's

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/apic/es7000_32: Remove unused variable

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Avoid unnecessary __clear_user() and xrstor in signal handling

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, vdso: Unmap vdso pages

14 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Fri, 6 Aug 2010 23:15:12 +0000 (16:15 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  console: Fix compilation regression

14 years agoSELINUX: Fix build error.
Ralf Baechle [Fri, 6 Aug 2010 19:37:56 +0000 (20:37 +0100)]
SELINUX: Fix build error.

Fix build error caused by a stale security/selinux/av_permissions.h in the $(src)
directory which will override a more recent version in $(obj) that is it
appears to strike only when building with a separate object directory.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
14 years agonfsd: don't allow setting maxblksize after svc created
J. Bruce Fields [Fri, 6 Aug 2010 22:00:33 +0000 (18:00 -0400)]
nfsd: don't allow setting maxblksize after svc created

It's harmless to set this after the server is created, but also
ineffective, since the value is only used at the time of
svc_create_pooled().  So fail the attempt, in keeping with the pattern
set by write_versions, write_{lease,grace}time and write_recoverydir.

(This could break userspace that tried to write to nfsd/max_block_size
between setting up sockets and starting the server.  However, such code
wouldn't have worked anyway, and I don't know of any examples--rpc.nfsd
in nfs-utils, probably the only user of the interface, doesn't do that.)

Signed-off-by: J. Bruce Fields <bfields@redhat.com>