Linus Torvalds [Thu, 18 Jan 2024 21:41:48 +0000 (13:41 -0800)]
Merge tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"This contains the initial support for host-side TDX support so that
KVM can run TDX-protected guests. This does not include the actual
KVM-side support which will come from the KVM folks. The TDX host
interactions with kexec also needs to be ironed out before this is
ready for prime time, so this code is currently Kconfig'd off when
kexec is on.
The majority of the code here is the kernel telling the TDX module
which memory to protect and handing some additional memory over to it
to use to store TDX module metadata. That sounds pretty simple, but
the TDX architecture is rather flexible and it takes quite a bit of
back-and-forth to say, "just protect all memory, please."
There is also some code tacked on near the end of the series to handle
a hardware erratum. The erratum can make software bugs such as a
kernel write to TDX-protected memory cause a machine check and
masquerade as a real hardware failure. The erratum handling watches
out for these and tries to provide nicer user errors"
* tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/virt/tdx: Make TDX host depend on X86_MCE
x86/virt/tdx: Disable TDX host support when kexec is enabled
Documentation/x86: Add documentation for TDX host support
x86/mce: Differentiate real hardware #MCs from TDX erratum ones
x86/cpu: Detect TDX partial write machine check erratum
x86/virt/tdx: Handle TDX interaction with sleep and hibernation
x86/virt/tdx: Initialize all TDMRs
x86/virt/tdx: Configure global KeyID on all packages
x86/virt/tdx: Configure TDX module with the TDMRs and global KeyID
x86/virt/tdx: Designate reserved areas for all TDMRs
x86/virt/tdx: Allocate and set up PAMTs for TDMRs
x86/virt/tdx: Fill out TDMRs to cover all TDX memory regions
x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions
x86/virt/tdx: Get module global metadata for module initialization
x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory
x86/virt/tdx: Add skeleton to enable TDX on demand
x86/virt/tdx: Add SEAMCALL error printing for module initialization
x86/virt/tdx: Handle SEAMCALL no entropy error in common code
x86/virt/tdx: Make INTEL_TDX_HOST depend on X86_X2APIC
x86/virt/tdx: Define TDX supported page sizes as macros
...
Linus Torvalds [Thu, 18 Jan 2024 21:23:53 +0000 (13:23 -0800)]
Merge tag 'x86_sgx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Dave Hansen:
"This time, these are entirely confined to SGX selftests fixes.
The mini SGX enclave built by the selftests has garnered some
attention because it stands alone and does not need the sizable
infrastructure of the official SGX SDK. I think that's why folks are
suddently interested in cleaning it up.
- Clean up selftest compilation issues, mostly from non-gcc compilers
- Avoid building selftests when not on x86"
* tag 'x86_sgx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/sgx: Skip non X86_64 platform
selftests/sgx: Remove incomplete ABI sanitization code in test enclave
selftests/sgx: Discard unsupported ELF sections
selftests/sgx: Ensure expected location of test enclave buffer
selftests/sgx: Ensure test enclave buffer is entirely preserved
selftests/sgx: Fix linker script asserts
selftests/sgx: Handle relocations in test enclave
selftests/sgx: Produce static-pie executable for test enclave
selftests/sgx: Remove redundant enclave base address save/restore
selftests/sgx: Specify freestanding environment for enclave compilation
selftests/sgx: Separate linker options
selftests/sgx: Include memory clobber for inline asm in test enclave
selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entry
selftests/sgx: Fix uninitialized pointer dereference in error path
Linus Torvalds [Thu, 18 Jan 2024 19:57:33 +0000 (11:57 -0800)]
Merge tag 'sched-urgent-2024-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a cpufreq related performance regression on certain systems, where
the CPU would remain at the lowest frequency, degrading performance
substantially"
* tag 'sched-urgent-2024-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix frequency selection for non-invariant case
Linus Torvalds [Thu, 18 Jan 2024 19:43:55 +0000 (11:43 -0800)]
Merge tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: typec: tipd: fix use of device-specific init function
usb: typec: tipd: Separate reset for TPS6598x
usb: mon: Fix atomicity violation in mon_bin_vma_fault
usb: gadget: uvc: Remove nested locking
usb: gadget: uvc: Fix use are free during STREAMOFF
usb: typec: class: fix typec_altmode_put_partner to put plugs
dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
dt-bindings: usb: xhci: Add num-hc-interrupters definition
xhci: add support to allocate several interrupters
USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8939: Drop RPM bus clocks
arm64: dts: qcom: sdm630: Drop RPM bus clocks
arm64: dts: qcom: qcs404: Drop RPM bus clocks
arm64: dts: qcom: msm8996: Drop RPM bus clocks
...
Linus Torvalds [Thu, 18 Jan 2024 19:37:24 +0000 (11:37 -0800)]
Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty
core and drivers in here, along with the usual set of rs485 updates
(someday this might work properly...)
Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
serial: sc16is7xx: refactor EFR lock
serial: sc16is7xx: reorder code to remove prototype declarations
serial: sc16is7xx: refactor FIFO access functions to increase commonality
serial: sc16is7xx: drop unneeded MODULE_ALIAS
serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
serial: sc16is7xx: add explicit return for some switch default cases
serial: sc16is7xx: add macro for max number of UART ports
serial: sc16is7xx: add driver name to struct uart_driver
serial: sc16is7xx: use i2c_get_match_data()
serial: sc16is7xx: use spi_get_device_match_data()
serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
serial: sc16is7xx: set safe default SPI clock frequency
serial: sc16is7xx: add check for unsupported SPI modes during probe
serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
serial: 8250_exar: Set missing rs485_supported flag
serial: omap: do not override settings for RS485 support
serial: core, imx: do not set RS485 enabled if it is not supported
serial: core: make sure RS485 cannot be enabled when it is not supported
...
Linus Torvalds [Thu, 18 Jan 2024 18:30:48 +0000 (10:30 -0800)]
Merge tag 'staging-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the "big" set of staging driver changes for 6.8-rc1. It's not
really that big this release cycle, not much happened except for 186
patches of coding style cleanups. The majority was in the rtl8192e
driver, but there are other smaller changes in a few other staging
drivers, full details in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (186 commits)
Staging: rtl8192e: Rename variable OpMode
Staging: rtl8192e: Rename variable bIsAggregateFrame
Staging: rtl8192e: Rename function rtllib_EnableNetMonitorMode()
Staging: rtl8192e: Rename variable NumRxOkInPeriod
Staging: rtl8192e: Rename variable NumTxOkInPeriod
Staging: rtl8192e: Rename variable bUsed
staging: vme_user: print more detailed infomation when an error occurs
Staging: rtl8192e: Rename function rtllib_DisableNetMonitorMode()
Staging: rtl8192e: Rename variable bInitState
Staging: rtl8192e: Rename variable skb_waitQ
Staging: rtl8192e: Rename variable BasicRate
Staging: rtl8192e: Rename variable QueryRate
Staging: rtl8192e: Rename function rtllib_TURBO_Info()
Staging: rtl8192e: Rename function rtllib_WMM_Info()
Staging: rtl8192e: Rename function rtllib_MFIE_Grate()
Staging: rtl8192e: Rename function rtllib_MFIE_Brate()
Staging: rtl8192e: Fixup statement broken across 2 lines in rtllib_softmac_new_net()
Staging: rtl8192e: Fixup statement broken across 2 lines in rtllib_softmac_xmit()
Staging: rtl8192e: Fix function definition broken across multiple lines
Staging: rtl8192e: Fix statement broken across 2 lines in rtllib_rx_assoc_resp()
...
Linus Torvalds [Thu, 18 Jan 2024 17:48:40 +0000 (09:48 -0800)]
Merge tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
Linus Torvalds [Thu, 18 Jan 2024 00:23:17 +0000 (16:23 -0800)]
Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Reserve ECAM so we don't assign it to PCI BARs; this works around
bugs where BIOS included ECAM in a PNP0A03 host bridge window,
didn't reserve it via a PNP0C02 motherboard device, and didn't
allocate space for SR-IOV VF BARs (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
- Log device type (Root Port, Switch Port, etc) during enumeration
(Bjorn Helgaas)
- Log bridges before downstream devices so the dmesg order is more
logical (Bjorn Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc)
consistently instead of a mix of names and "reg 0x10" (Puranjay
Mohan, Bjorn Helgaas)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding
rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
Järvinen)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
lpfc (Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
Resource management:
- Restructure pci_dev_for_each_resource() to avoid computing the
address of an out-of-bounds array element (the bounds check was
performed later so the element was never actually *read*, but it's
nicer to avoid even computing an out-of-bounds address) (Andy
Shevchenko)
Driver binding:
- Convert pci-host-common.c platform .remove() callback to
.remove_new() returning 'void' since it's not useful to return
error codes here (Uwe Kleine-König)
- Convert exynos, keystone, kirin from .remove() to .remove_new(),
which returns void instead of int (Uwe Kleine-König)
- Drop unused struct pci_driver.node member (Mathias Krause)
Virtualization:
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)
Error handling:
- Log AER errors as "Correctable" (not "Corrected") or
"Uncorrectable" to match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing
the raw hex value (Bjorn Helgaas)
Endpoint framework:
- Use a unique test pattern for each BAR in the pci_endpoint_test to
make it easier to debug address translation issues (Niklas Cassel)
Broadcom STB PCIe controller driver:
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Add suspend/resume support for Layerscape LS1043a and LS1021a,
including software-managed PME_Turn_Off and transitions between L0,
L2/L3_Ready Link states (Frank Li)
MediaTek PCIe controller driver:
- Clear MSI interrupt status before handler to avoid missing MSIs
that occur after the handler (qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 translation window setup to handle MMIO space
that is not a power of two in size (Jianjun Wang)
Qualcomm PCIe controller driver:
- Increase qcom iommu-map maxItems to accommodate SDX55 (five
entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly
called "reset-names" (Krzysztof Kozlowski)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
Armstrong)
Renesas R-Car PCIe controller driver:
- Replace of_device.h with explicit of.h include to untangle header
usage (Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v
regulators on KingFisher (Wolfram Sang)
SiFive FU740 PCIe controller driver:
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
ARCH_SIFIVE (Conor Dooley)
Synopsys DesignWare PCIe controller driver:
- Align iATU mapping for endpoint MSI-X (Niklas Cassel)
- Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
Shimoda)
- Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
Shimoda)
- Rename struct dw_pcie_ep_ops.func_conf_select() to
.get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)
- Add j721e DT and driver support for 'num-lanes' for devices that
support x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt
Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
specific to those TI SoC parts (Peter Robinson)
TI Keystone PCIe controller driver:
- Hold power management references to all PHYs while enabling them to
avoid a race when one provides clocks to others (Siddharth
Vadapalli)
Xilinx XDMA PCIe controller driver:
- Remove redundant dev_err(), since platform_get_irq() and
platform_get_irq_byname() already log errors (Yang Li)
- Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
(Krzysztof Wilczyński)
- Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
irq_domain_add_linear() fails (Harshit Mogalapalli)
MicroSemi Switchtec management driver:
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was
done in stdev_release(), which used stale pointers if stdev->cdev
happened to be open when the PCI device was removed (Daniel
Stodden)
Miscellaneous:
- Convert interrupt terminology from "legacy" to "INTx" to be more
specific and match spec terminology (Damien Le Moal)
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
deprecated ida_simple_*() API with ida_alloc() and ida_free()
(Christophe JAILLET)"
* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Fix kernel-doc issues
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
PCI: keystone: Fix race condition when initializing PHYs
PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
misc: pci_endpoint_test: Use a unique test pattern for each BAR
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
...
Linus Torvalds [Wed, 17 Jan 2024 23:55:33 +0000 (15:55 -0800)]
Merge tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"For this kernel cycle I managed an immutable branch for the PEF2256
WAN framer that has some pin control portions. It already landed in
your tree through the net pull request but here it is mentioned again.
The most interesting is perhaps the Samsung Exynos subdrivers for the
Tensor SoC used in Google Pixel 6 and the ExynosAuto subdriver for
automotive. Along with the earlier merged Tesla FSD subdriver it shows
some of the versatile uses of the Samsung Exynos silicon. It is also
used in the latest version of Axis Communications ARTPEC chips so it
is a very widely deployed SoC family.
We also have the Intel Meteor Lake SoC which I think is for laptops.
It's a pretty interesting chip with Xe graphics and integrated PCH.
Core changes:
- A new PINCTRL_GROUP_DESC() infrastructure macro is added and used
in different drivers, generic group description struct group_desc
is now used all over the place.
New drivers:
- New driver for the Texas Instruments TPS6494 Power Management IC.
- New driver for the Lantic PEF2256 framer pin multiplexer. This IC
has some pins that can be reconfigured in different ways. The
actual driver comes on an immutable branch with the net WAN parts,
the IC is some latest-and-greatest serial line funnel for e.g.
wireless access points.
- New subdriver for the Samsung Exynos Auto V920 pin controller, used
for automotive applications.
- New subdriver for the Samsung "GS101" SoC pin controller, this is
the Google "Tensor" SoC used in the Google Pixel 6.
- New subdriver for the Intel Meteor Point SoC pin controller.
- New subdriver for the Qualcomm SM8650 top level (TLMM) and LPASS
pin controllers.
- New subdriver for the Qualcomm X1E80100 top level (TLMM) pin
controller.
- New subdriver for the Qualcomm SM4450 top level (TLMM) pin
controller.
- The "single" pin controller now supports the Texas Instruments
J7200 SoC.
Improvements:
- Intel has created a new (Intel-)generic pin controller driver that
is now used by all contemporary Intel platforms.
- Intel is now also making use of some cleanup helpers.
- Enble 910 Ohm bias in the Intel Tangier driver.
- The Samsung driver now suppors irq_set_affinity() in it's IRQ chip
giving support for non wake up external gpio interrupts"
* tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits)
pinctrl: samsung: constify iomem pointers
pinctrl: cy8c95x0: Cache muxed registers
dt-bindings: pinctrl: xilinx: Rename *gpio to *gpio-grp
pinctrl: qcom: lpass-lpi: remove duplicated include
dt-bindings: pinctrl: qcom: drop common properties and allow wakeup-parent
dt-bindings: pinctrl: qcom: drop common properties
dt-bindings: pinctrl: qcom,ipq5018-tlmm: use common TLMM bindings
dt-bindings: pinctrl: qcom,x1e80100-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8650-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8550-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sdx75-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sa8775p-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,qdu1000-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom: create common LPASS LPI schema
pinctrl: qcom: sm4450: dd SM4450 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
dt-bindings: pinctrl: qcom,pmic-mpp: clean up example
pinctrl: intel: Add Intel Meteor Point pin controller and GPIO support
pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins
pinctrl: renesas: rzg2l: Add output enable support
...
Linus Torvalds [Wed, 17 Jan 2024 23:25:27 +0000 (15:25 -0800)]
Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Allwinner A100 RGB LED controller
- Add support for Maxim 5970 Dual Hot-swap controller
New Device Support:
- Add support for AW20108 to Awinic LED driver
New Functionality:
- Extend support for Net speeds to include; 2.5G, 5G and 10G
- Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off
via sysfs if required
- Add support for hardware control in AW200xx
Fix-ups:
- Use safer methods for string handling
- Improve error handling; return proper error values, simplify,
avoid duplicates, etc
- Replace Mutex use with the Completion mechanism
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use generic platform device properties
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Continue work to remove superfluous platform .remove() call-backs
- Remove superfluous/defunct code
- Trivial; whitespace, unused variables, spelling, clean-ups, etc
- Avoid unnecessary duplicate locks
Bug Fixes:
- Repair Kconfig based dependency lists
- Ensure unused dynamically allocated data is freed after use
- Fix support for brightness control
- Add missing sufficient delays during reset to ensure correct
operation
- Avoid division-by-zero issues"
* tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits)
leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control
leds: trigger: panic: Don't register panic notifier if creating the trigger failed
leds: sun50i-a100: Convert to be agnostic to property provider
leds: max5970: Add missing headers
leds: max5970: Make use of dev_err_probe()
leds: max5970: Make use of device properties
leds: max5970: Remove unused variable
leds: rgb: Drop obsolete dependency on COMPILE_TEST
leds: sun50i-a100: Avoid division-by-zero warning
leds: trigger: Remove unused function led_trigger_rename_static()
leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip
leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails
dt-bindings: leds: qcom,spmi-flash-led: Fix example node name
dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints
dt-bindings: leds: awinic,aw200xx: Add AW20108 device
leds: aw200xx: Add support for aw20108 device
leds: aw200xx: Improve autodim calculation method
leds: aw200xx: Enable disable_locking flag in regmap config
leds: aw200xx: Add delay after software reset
dt-bindings: leds: aw200xx: Remove property "awinic,display-rows"
...
Linus Torvalds [Wed, 17 Jan 2024 23:21:21 +0000 (15:21 -0800)]
Merge tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
"New Device Support:
- Add support for Qualcomm PM8937 PMIC to QCOM SPMI PMIC
Fix-ups:
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Improve error handling; return proper error values, simplify,
avoid duplicates, etc
- Continue work to remove superfluous platform .remove() call-backs
- Move some exported symbols into private namespaces
- Clean-up and staticify PM related operations
- Trivial; spelling, whitespace, clean-ups, etc
- Fix include lists; alphabetise, remove unused, explicitly add used
Bug Fixes:
- Use PLATFORM_DEVID_AUTO to ensure multiple duplicate devices can
co-exist
- Ensure debugfs register view is correctly presented
- Fix ordering and value issues in current use of
clk_register_fractional_divider()
- Repair Kconfig based dependency lists"
* tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits)
mfd: ti_am335x_tscadc: Fix TI SoC dependencies
dt-bindings: mfd: sprd: Add support for UMS9620
mfd: ab8500-sysctrl: Drop ancient charger
mfd: intel-lpss: Fix the fractional clock divider flags
mfd: tps6594: Add null pointer check to tps6594_device_init()
dt-bindings: mfd: pm8008: Clean up example node names
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Clean up example
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix regulator binding
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix up binding reference
mfd: da9062: Simplify obtaining I2C match data
mfd: syscon: Fix null pointer dereference in of_syscon_register()
mfd: intel-lpss: Don't fail probe on success of pci_alloc_irq_vectors()
mfd: twl6030-irq: Revert to use of_match_device()
mfd: cs42l43: Correct order of include files to be alphabetical
mfd: cs42l43: Correct SoundWire port list
mfd: Fix a few spelling mistakes in PMIC header file comments
mfd: intel-lpss: Provide Intel LPSS PM ops structure
mfd: intel-lpss: Move exported symbols to INTEL_LPSS namespace
mfd: intel-lpss: Adjust header inclusions
mfd: intel-lpss: Use device_get_match_data()
...
Linus Torvalds [Wed, 17 Jan 2024 23:09:12 +0000 (15:09 -0800)]
Merge tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The i.MX DSP remoteproc driver adds support for providing a resource
table, in order to enable IPC with the core
- The TI K3 DSP driver is transitioned to remove_new, error messages
are changed to use symbolic error codes, and dev_err_probe() is used
where applicable
- Support for the Qualcomm SC7280 audio, compute and WiFi co-processors
are added to the Qualcomm TrustZone based remoteproc driver
* tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS
dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles
dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names
remoteproc: k3-dsp: Convert to platform remove callback returning void
remoteproc: k3-dsp: Use symbolic error codes in error messages
remoteproc: k3-dsp: Suppress duplicate error message in .remove()
arm64: dts: imx8mp: Add reserve-memory nodes for DSP
remoteproc: imx_dsp_rproc: Add mandatory find_loaded_rsc_table op
Linus Torvalds [Wed, 17 Jan 2024 23:05:27 +0000 (15:05 -0800)]
Merge tag 'rpmsg-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This make virtio free driver_override upon removal. It also updates
the rpmsg documentation after earlier API updates"
* tag 'rpmsg-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: virtio: Free driver_override when rpmsg_remove()
doc: rmpsg: Update with rpmsg_endpoint
Linus Torvalds [Wed, 17 Jan 2024 22:59:05 +0000 (14:59 -0800)]
Merge tag 'drm-next-2024-01-15-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is just a wrap up of fixes from the last few days. It has the
proper fix to the i915/xe collision, we can clean up what you did
later once rc1 lands.
Otherwise it's a few other i915, a v3d, rockchip and a nouveau fix to
make GSP load on some original Turing GPUs.
i915:
- Fixes for kernel-doc warnings enforced in linux-next
- Another build warning fix for string formatting of intel_wakeref_t
- Display fixes for DP DSC BPC and C20 PLL state verification
v3d:
- register readout fix
rockchip:
- two build warning fixes
nouveau:
- fix GSP loading on Turing with different nvdec configuration"
* tag 'drm-next-2024-01-15-1' of git://anongit.freedesktop.org/drm/drm:
nouveau/gsp: handle engines in runl without nonstall interrupts.
drm/i915/perf: reconcile Excess struct member kernel-doc warnings
drm/i915/guc: reconcile Excess struct member kernel-doc warnings
drm/i915/gt: reconcile Excess struct member kernel-doc warnings
drm/i915/gem: reconcile Excess struct member kernel-doc warnings
drm/i915/dp: Fix the max DSC bpc supported by source
drm/i915: don't make assumptions about intel_wakeref_t type
drm/i915/dp: Fix the PSR debugfs entries wrt. MST connectors
drm/i915/display: Fix C20 pll selection for state verification
drm/v3d: Fix support for register debugging on the RPi 4
drm/rockchip: vop2: Drop unused if_dclk_rate variable
drm/rockchip: vop2: Drop superfluous include
Linus Torvalds [Wed, 17 Jan 2024 22:47:33 +0000 (14:47 -0800)]
Merge tag 'thermal-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These add support for debugfs-based diagnostics to the thermal core,
simplify the thermal netlink API, fix system-wide PM support in the
Intel HFI driver and clean up some code.
Specifics:
- Add debugfs-based diagnostics support to the thermal core (Daniel
Lezcano, Dan Carpenter)
- Fix a power allocator thermal governor issue preventing it from
resetting cooling devices sometimes (Di Shen)
- Simplify the thermal netlink API and clean up related code (Rafael
J. Wysocki)
- Make the Intel HFI driver support hibernation and deep suspend
properly (Ricardo Neri)"
* tag 'thermal-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/debugfs: Unlock on error path in thermal_debug_tz_trip_up()
thermal: intel: hfi: Add syscore callbacks for system-wide PM
thermal: gov_power_allocator: avoid inability to reset a cdev
thermal: helpers: Rearrange thermal_cdev_set_cur_state()
thermal: netlink: Rework notify API for cooling devices
thermal: core: Use kstrdup_const() during cooling device registration
thermal/debugfs: Add thermal debugfs information for mitigation episodes
thermal/debugfs: Add thermal cooling device debugfs information
thermal: netlink: Pass thermal zone pointer to notify routines
thermal: netlink: Drop thermal_notify_tz_trip_add/delete()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_up/down()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_change()
Linus Torvalds [Wed, 17 Jan 2024 22:37:40 +0000 (14:37 -0800)]
Merge tag 'acpi-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add support for new MADT flags to ACPICA, constify the PNP bus
type structure and add new ACPI IRQ management quirks.
Specifics:
- Make pnp_bus_type const (Greg Kroah-Hartman)
- Add ACPI IRQ management quirks for ASUS ExpertBook B1502CGA and
ASUS Vivobook E1504GA and E1504GAB (Ben Mayo, Michael Maltsev)
- Add new MADT GICC/GICR/ITS non-coherent flags and GICC online
capable bit handling to ACPICA (Lorenzo Pieralisi)"
* tag 'acpi-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: MADT: Add new MADT GICC/GICR/ITS non-coherent flags handling
ACPICA: MADT: Add GICC online capable bit handling
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CGA
ACPI: resource: Add DMI quirks for ASUS Vivobook E1504GA and E1504GAB
PNP: make pnp_bus_type const
Linus Torvalds [Wed, 17 Jan 2024 22:07:14 +0000 (14:07 -0800)]
Merge tag 'pm-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These restore the asynchronous device resume optimization removed by
the previous PM merge, make the intel_pstate driver work better on
Meteor Lake systems, optimize the PM QoS core code slightly and fix up
typos in admin-guide.
Specifics:
- Restore the system-wide asynchronous device resume optimization
removed by a recent concurrency fix (Rafael J. Wysocki)
- Make the intel_pstate cpufreq driver allow Meteor Lake systems to
run at somewhat higher frequencies (Srinivas Pandruvada)
- Make the PM QoS core code use kcalloc() for array allocation (Erick
Archer)
- Fix two PM-related typos in admin-guide (Erwan Velu)"
* tag 'pm-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Restore asynchronous device resume optimization
Documentation: admin-guide: PM: Fix two typos
cpufreq: intel_pstate: Update hybrid scaling factor for Meteor Lake
PM: QoS: Use kcalloc() instead of kzalloc()
Linus Torvalds [Wed, 17 Jan 2024 21:03:37 +0000 (13:03 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
Linus Torvalds [Wed, 17 Jan 2024 19:45:01 +0000 (11:45 -0800)]
Merge tag 'parisc-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Two small fixes for the parisc architecture:
- Fix PDC address calculation with narrow firmware (64-bit kernel on
32-bit firmware)
- Fix kthread which checks power button get started on qemu too"
* tag 'parisc-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/power: Fix power soft-off button emulation on qemu
parisc/firmware: Fix F-extend for PDC addresses
Linus Torvalds [Wed, 17 Jan 2024 19:40:52 +0000 (11:40 -0800)]
Merge tag 'xtensa-20240117' of https://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
- small cleanups in the xtensa PCI and asmmacro code
- fix kernel build with FDPIC toolchain
* tag 'xtensa-20240117' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: don't produce FDPIC output with fdpic toolchain
xtensa: Use PCI_HEADER_TYPE_MFD instead of literal
xtensa: replace <asm-generic/export.h> with <linux/export.h>
xtensa: fix variants path in the Kconfig help
Linus Torvalds [Wed, 17 Jan 2024 19:27:23 +0000 (11:27 -0800)]
Merge tag 'microblaze-v6.8' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
"Just defconfig updates:
- enable NFS, Marvell phy
- sync defconfig with the latest Kconfig layout"
* tag 'microblaze-v6.8' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: defconfig: Enable the Marvell phy driver
microblaze: Enable options to mount a rootfs via NFS
microblaze: Align defconfig with latest Kconfig layout
Linus Torvalds [Wed, 17 Jan 2024 19:20:50 +0000 (11:20 -0800)]
Merge tag 'mips_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Alchemy: Fix an out-of-bound access in db1550_dev_setup()
MIPS: Alchemy: Fix an out-of-bound access in db1200_dev_setup()
MIPS: Fix typos
MIPS: Remove unused shadow GPR support from vector irq setup
MIPS: Allow vectored interrupt handler to reside everywhere for 64bit
mips: Set dump-stack arch description
mips: mm: add slab availability checking in ioremap_prot
mips: Optimize max_mapnr init procedure
mips: Fix max_mapnr being uninitialized on early stages
mips: Fix incorrect max_low_pfn adjustment
mips: dmi: Fix early remap on MIPS32
MIPS: compressed: Use correct instruction for 64 bit code
MIPS: SGI-IP27: hubio: fix nasid kernel-doc warning
MAINTAINERS: Add myself as maintainer of the Ralink architecture
Linus Torvalds [Wed, 17 Jan 2024 18:50:46 +0000 (10:50 -0800)]
Merge tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for many new extensions in hwprobe, along with a handful of
cleanups
- Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE
- Support for the which-cpus flavor of hwprobe
- Support for XIP kernels has been resurrected
* tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
riscv: hwprobe: export Zicond extension
riscv: hwprobe: export Zacas ISA extension
riscv: add ISA extension parsing for Zacas
dt-bindings: riscv: add Zacas ISA extension description
riscv: hwprobe: export Ztso ISA extension
riscv: add ISA extension parsing for Ztso
use linux/export.h rather than asm-generic/export.h
riscv: Remove SHADOW_OVERFLOW_STACK_SIZE macro
riscv; fix __user annotation in save_v_state()
riscv: fix __user annotation in traps_misaligned.c
riscv: Select ARCH_WANTS_NO_INSTR
riscv: Remove obsolete rv32_defconfig file
riscv: Allow disabling of BUILTIN_DTB for XIP
riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro
riscv: Make XIP bootable again
riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC
riscv: Fix module_alloc() that did not reset the linear mapping permissions
riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping
riscv: Check if the code to patch lies in the exit section
riscv: Use the same CPU operations for all CPUs
...
Linus Torvalds [Wed, 17 Jan 2024 18:44:34 +0000 (10:44 -0800)]
Merge tag 'uml-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Clang coverage support
- Many cleanups from Benjamin Berg
- Various minor fixes
* tag 'uml-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Mark 32bit syscall helpers as clobbering memory
um: Remove unused register save/restore functions
um: Rely on PTRACE_SETREGSET to set FS/GS base registers
Documentation: kunit: Add clang UML coverage example
arch: um: Add Clang coverage support
um: time-travel: fix time corruption
um: net: Fix return type of uml_net_start_xmit()
um: Always inline stub functions
um: Do not use printk in userspace trampoline
um: Reap winch thread if it fails
um: Do not use printk in SIGWINCH helper thread
um: Don't use vfprintf() for os_info()
um: Make errors to stop ptraced child fatal during startup
um: Drop NULL check from start_userspace
um: Drop support for hosts without SYSEMU_SINGLESTEP support
um: document arch_futex_atomic_op_inuser
um: mmu: remove stub_pages
um: Fix naming clash between UML and scheduler
um: virt-pci: fix platform map offset
Linus Torvalds [Wed, 17 Jan 2024 18:27:13 +0000 (10:27 -0800)]
Merge tag 'ubifs-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Use in-tree fault injection framework and add new injection types
- Fix for a memory leak in the block driver
UBIFS:
- kernel-doc fixes
- Various minor fixes"
* tag 'ubifs-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: block: fix memleak in ubiblock_create()
ubifs: fix kernel-doc warnings
mtd: Add several functions to the fail_function list
ubi: Reserve sufficient buffer length for the input mask
ubi: Add six fault injection type for testing
ubi: Split io_failures into write_failure and erase_failure
ubi: Use the fault injection framework to enhance the fault injection capability
ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path
ubifs: Check @c->dirty_[n|p]n_cnt and @c->nroot state under @c->lp_mutex
ubifs: describe function parameters
ubifs: auth.c: fix kernel-doc function prototype warning
ubifs: use crypto_shash_tfm_digest() in ubifs_hmac_wkm()
Linus Torvalds [Wed, 17 Jan 2024 18:23:34 +0000 (10:23 -0800)]
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt fix from Eric Biggers:
"Fix a bug in my change to how f2fs frees its superblock info (which
was part of changing the timing of fscrypt keyring destruction)"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
f2fs: fix double free of f2fs_sb_info
Linus Torvalds [Wed, 17 Jan 2024 17:34:25 +0000 (09:34 -0800)]
Merge tag 'vfs-6.8-rc1.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains two fixes for the current merge window. The listmount
changes that you requested and a fix for a fsnotify performance
regression:
- The proposed listmount changes are currently under my authorship. I
wasn't sure whether you'd wanted to be author as the patch wasn't
signed off. If you do I'm happy if you just apply your own patch.
I've tested the patch with my sh4 cross-build setup. And confirmed
that a) the build failure with sh on current upstream is
reproducible and that b) the proposed patch fixes the build
failure. That should only leave the task of fixing put_user on sh.
- The fsnotify regression was caused by moving one of the hooks out
of the security hook in preparation for other fsnotify work. This
meant that CONFIG_SECURITY would have compiled out the fsnotify
hook before but didn't do so now.
That lead to up to 6% performance regression in some io_uring
workloads that compile all fsnotify and security checks out. Fix
this by making sure that the relevant hooks are covered by the
already existing CONFIG_FANOTIFY_ACCESS_PERMISSIONS where the
relevant hook belongs"
* tag 'vfs-6.8-rc1.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
fs: rework listmount() implementation
fsnotify: compile out fsnotify permission hooks if !FANOTIFY_ACCESS_PERMISSIONS
Linus Torvalds [Wed, 17 Jan 2024 17:31:36 +0000 (09:31 -0800)]
Merge tag 'mm-hotfixes-stable-2024-01-12-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"For once not mostly MM-related.
17 hotfixes. 10 address post-6.7 issues and the other 7 are cc:stable"
* tag 'mm-hotfixes-stable-2024-01-12-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
userfaultfd: avoid huge_zero_page in UFFDIO_MOVE
MAINTAINERS: add entry for shrinker
selftests: mm: hugepage-vmemmap fails on 64K page size systems
mm/memory_hotplug: fix memmap_on_memory sysfs value retrieval
mailmap: switch email for Tanzir Hasan
mailmap: add old address mappings for Randy
kernel/crash_core.c: make __crash_hotplug_lock static
efi: disable mirror feature during crashkernel
kexec: do syscore_shutdown() in kernel_kexec
mailmap: update entry for Manivannan Sadhasivam
fs/proc/task_mmu: move mmu notification mechanism inside mm lock
mm: zswap: switch maintainers to recently active developers and reviewers
scripts/decode_stacktrace.sh: optionally use LLVM utilities
kasan: avoid resetting aux_lock
lib/Kconfig.debug: disable CONFIG_DEBUG_INFO_BTF for Hexagon
MAINTAINERS: update LTP maintainers
kdump: defer the insertion of crashkernel resources
Merge additional updates for 6.8-rc1 in the thermal core and in the
Intel HFI thermal driver:
- Add debugfs-based diagnostics support to the thermal core (Daniel
Lezcano, Dan Carpenter).
- Fix a power allocator thermal governor issue preventing it from
resetting cooling devices sometimes (Di Shen).
- Simplify the thermal netlink API and clean up related code (Rafael J.
Wysocki).
- Make the Intel HFI driver support hibernation and deep suspend
properly (Ricardo Neri).
* thermal-core:
thermal/debugfs: Unlock on error path in thermal_debug_tz_trip_up()
thermal: gov_power_allocator: avoid inability to reset a cdev
thermal: helpers: Rearrange thermal_cdev_set_cur_state()
thermal: netlink: Rework notify API for cooling devices
thermal: core: Use kstrdup_const() during cooling device registration
thermal/debugfs: Add thermal debugfs information for mitigation episodes
thermal/debugfs: Add thermal cooling device debugfs information
thermal: netlink: Pass thermal zone pointer to notify routines
thermal: netlink: Drop thermal_notify_tz_trip_add/delete()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_up/down()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_change()
When frequency invariance is not enabled, get_capacity_ref_freq(policy)
is supposed to return the current frequency and the performance margin
applied by map_util_perf(), enabling the utilization to go above the
maximum compute capacity and to select a higher frequency than the current one.
After the changes in 9c0b4bb7f630, the performance margin was applied
earlier in the path to take into account utilization clampings and
we couldn't get a utilization higher than the maximum compute capacity,
and the CPU remained 'stuck' at lower frequencies.
To fix this, we must use a frequency above the current frequency to
get a chance to select a higher OPP when the current one becomes fully used.
Apply the same margin and return a frequency 25% higher than the current
one in order to switch to the next OPP before we fully use the CPU
at the current one.
Bjorn Helgaas [Mon, 15 Jan 2024 18:10:41 +0000 (12:10 -0600)]
Merge branch 'pci/misc'
- Drop unused struct pci_driver.node member (Mathias Krause)
- Fix documentation typos (Attreyee Mukherjee)
- Use a unique test pattern for each BAR in the pci_endpoint_test to make
it easier to debug address translation issues (Niklas Cassel)
- Fix kernel-doc issues (Bjorn Helgaas)
* pci/misc:
PCI: Fix kernel-doc issues
misc: pci_endpoint_test: Use a unique test pattern for each BAR
docs: PCI: Fix typos
PCI: Remove unused 'node' member from struct pci_driver
Bjorn Helgaas [Mon, 15 Jan 2024 18:10:41 +0000 (12:10 -0600)]
Merge branch 'pci/remove-old-api'
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of deprecated
ida_simple_*() API with ida_alloc() and ida_free() (Christophe JAILLET)
* pci/remove-old-api:
dw-xdata: Remove usage of the deprecated ida_simple_*() API
misc: pci_endpoint_test: Remove usage of the deprecated ida_simple_*() API
PCI: vmd: Remove usage of the deprecated ida_simple_*() API
Bjorn Helgaas [Mon, 15 Jan 2024 18:10:40 +0000 (12:10 -0600)]
Merge branch 'pci/irq-clean-up'
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more explicit and match spec
terminology (Bjorn Helgaas)
- Use existing PCI_IRQ_INTX, PCI_IRQ_MSI, PCI_IRQ_MSIX in artpec6, cadence,
designware, designware-plat, dra7xx, imx6, keembay, keystone, layerscape,
mhi, ntb, qcom, rcar, rcar-gen4, rockchip, tegra194, uniphier, vntb; drop
the redundant pci_epc_irq_type enum with the same values (Damien Le Moal)
- Use "intx" instead of "leg" or "legacy" when describing INTx interrupts
in endpoint core, endpoint tests, cadence, dra7xx, designware,
dw-rockchip, dwc core, imx6, keystone, layerscape, qcom, rcar-gen4,
rockchip, tegra194, uniphier, xilinx-nwl (Damien Le Moal)
* pci/irq-clean-up:
PCI: xilinx-nwl: Use INTX instead of legacy
PCI: rockchip-host: Rename rockchip_pcie_legacy_int_handler()
PCI: rockchip-ep: Use INTX instead of legacy
PCI: uniphier: Use INTX instead of legacy
PCI: tegra194: Use INTX instead of legacy
PCI: dw-rockchip: Rename rockchip_pcie_legacy_int_handler()
PCI: keystone: Use INTX instead of legacy
PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq()
PCI: cadence: Use INTX instead of legacy
PCI: dra7xx: Rename dra7xx_pcie_raise_legacy_irq()
misc: pci_endpoint_test: Use INTX instead of LEGACY
PCI: endpoint: Rename LEGACY to INTX in test function driver
PCI: endpoint: Use INTX instead of legacy
PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitions
PCI: Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX
Bjorn Helgaas [Mon, 15 Jan 2024 18:10:38 +0000 (12:10 -0600)]
Merge branch 'pci/controller/layerscape'
- Add suspend/resume support for Layerscape LS1043a, including
software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready
Link states (Frank Li)
* pci/controller/layerscape:
PCI: layerscape: Add suspend/resume for ls1043a
PCI: layerscape(ep): Rename pf_* as pf_lut_*
PCI: layerscape: Add suspend/resume for ls1021a
PCI: layerscape: Add function pointer for exit_from_l2()
Bjorn Helgaas [Mon, 15 Jan 2024 18:10:36 +0000 (12:10 -0600)]
Merge branch 'pci/controller/cadence'
- Add j721e DT and driver support for 'num-lanes' for devices that support
x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to
those TI SoC parts (Peter Robinson)
* pci/controller/cadence:
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI: j721e: Add PCIe 4x lane selection support
PCI: j721e: Add per platform maximum lane settings
dt-bindings: PCI: ti,j721e-pci-*: Add j784s4-pci-* compatible strings
dt-bindings: PCI: ti,j721e-pci-*: Add checks for num-lanes
Bjorn Helgaas [Mon, 15 Jan 2024 18:10:35 +0000 (12:10 -0600)]
Merge branch 'pci/switchtec'
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was done in
stdev_release(), which used stale pointers if stdev->cdev happened to be
open when the PCI device was removed (Daniel Stodden)
* pci/switchtec:
PCI: switchtec: Fix stdev_release() crash after surprise hot remove
Bjorn Helgaas [Mon, 15 Jan 2024 18:10:35 +0000 (12:10 -0600)]
Merge branch 'pci/resource'
- Restructure pci_dev_for_each_resource() to avoid computing the address of
an out-of-bounds array element (the bounds check was performed later so
the element was never actually *read*, but it's nicer to avoid even
computing an out-of-bounds address) (Andy Shevchenko)
* pci/resource:
PCI: Avoid potential out-of-bounds read in pci_dev_for_each_resource()
Bjorn Helgaas [Mon, 15 Jan 2024 18:10:34 +0000 (12:10 -0600)]
Merge branch 'pci/enumeration-logging'
- Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn
Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently
instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas)
- Log bridges before devices below the bridges (Bjorn Helgaas)
* pci/enumeration-logging:
PCI: Log bridge info when first enumerating bridge
PCI: Log bridge windows conditionally
PCI: Supply bridge device, not secondary bus, to read window details
PCI: Move pci_read_bridge_windows() below individual window accessors
PCI: Use resource names in PCI log messages
PCI: Update BAR # and window messages
PCI: Log device type during enumeration
Bjorn Helgaas [Mon, 15 Jan 2024 18:10:34 +0000 (12:10 -0600)]
Merge branch 'pci/enumeration'
- Convert pci-host-common.c platform .remove() callback to .remove_new()
returning 'void' since it's not useful to return error codes here (Uwe
Kleine-König)
- Log a message about updating AMD USB controller class code (so dwc3, not
xhci, claims it) only when we actually change it (Guilherme G. Piccoli)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc
(Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather
than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen)
* pci/enumeration:
PCI: Fix 64GT/s effective data rate calculation
x86/pci: Clean up open-coded PCIBIOS return code mangling
scsi: lpfc: Use PCI_HEADER_TYPE_MFD instead of literal
powerpc/fsl-pci: Use PCI_HEADER_TYPE_MASK instead of literal
x86/pci: Use PCI_HEADER_TYPE_* instead of literals
PCI: Only override AMD USB controller if required
PCI: host-generic: Convert to platform remove callback returning void
Bjorn Helgaas [Mon, 15 Jan 2024 18:10:33 +0000 (12:10 -0600)]
Merge branch 'pci/aer'
- Log AER errors as "Correctable" (not "Corrected") or "Uncorrectable" to
match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing the raw
hex value (Bjorn Helgaas)
* pci/aer:
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
Bjorn Helgaas [Wed, 6 Dec 2023 18:17:51 +0000 (12:17 -0600)]
PCI: Fix kernel-doc issues
Fix kernel-doc issues reported by
"find include -name \*pci\* | xargs scripts/kernel-doc -none":
include/linux/pci.h:731: warning: Function parameter or member 'pdev' not described in 'pci_is_vga'
include/linux/pci-epc.h:154: warning: Function parameter or member 'list_lock' not described in 'pci_epc'
include/linux/pci-epf.h:83: warning: expecting prototype for struct pci_epf_event_ops. Prototype was for struct pci_epc_event_ops instead
Link: https://lore.kernel.org/r/20240111162850.2177655-1-helgaas@kernel.org Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Sui Jingfeng <suijingfeng@loongson.cn>
Dave Airlie [Wed, 10 Jan 2024 01:14:05 +0000 (11:14 +1000)]
nouveau/gsp: handle engines in runl without nonstall interrupts.
It appears on TU106 GPUs (2070), that some of the nvdec engines
are in the runlist but have no valid nonstall interrupt, nouveau
didn't handle that too well.
Dave Airlie [Sun, 14 Jan 2024 22:06:19 +0000 (08:06 +1000)]
Merge tag 'drm-intel-next-fixes-2024-01-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fixes for kernel-doc warnings enforced in linux-next
- Another build warning fix for string formatting of intel_wakeref_t
- Display fixes for DP DSC BPC and C20 PLL state verification
Frank Li [Tue, 9 Jan 2024 05:25:48 +0000 (00:25 -0500)]
i3c: master: fix kernel-doc check warning
Fix warning found by
'scripts/kernel-doc -v -none include/linux/i3c/master.h'
include/linux/i3c/master.h:457: warning: Function parameter or member 'enable_hotjoin' not described in 'i3c_master_controller_ops'
include/linux/i3c/master.h:457: warning: Function parameter or member 'disable_hotjoin' not described in 'i3c_master_controller_ops'
include/linux/i3c/master.h:499: warning: Function parameter or member 'hotjoin' not described in 'i3c_master_controller'
Jason-JH.Lin [Fri, 15 Dec 2023 07:00:26 +0000 (15:00 +0800)]
mailbox: mtk-cmdq: Add CMDQ driver support for mt8188
Add CMDQ driver support for mt8188 by adding its compatible and
driver data in CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Jason-JH.Lin [Fri, 15 Dec 2023 07:00:25 +0000 (15:00 +0800)]
mailbox: mtk-cmdq: Sort cmdq platform data by compatible name
Sort cmdq platform data according to the number sequence of
compatible names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Jason-JH.Lin [Fri, 15 Dec 2023 07:00:24 +0000 (15:00 +0800)]
mailbox: mtk-cmdq: Rename gce_plat variable with SoC name postfix
Rename gce_plat variable postfix from 'v1~v7' to SoC names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Abel Vesa [Thu, 14 Dec 2023 17:16:04 +0000 (19:16 +0200)]
dt-bindings: mailbox: qcom-ipcc: document the X1E80100 Inter-Processor Communication Controller
Document the Inter-Processor Communication Controller on the X1E80100 Platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:40 +0000 (22:02 +0100)]
mailbox: zynqmp-ipi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:39 +0000 (22:02 +0100)]
mailbox: tegra-hsp: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:38 +0000 (22:02 +0100)]
mailbox: sun6i-msgbox: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:37 +0000 (22:02 +0100)]
mailbox: stm32-ipcc: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:36 +0000 (22:02 +0100)]
mailbox: qcom-ipcc: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:35 +0000 (22:02 +0100)]
mailbox: qcom-apcs-ipc: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:34 +0000 (22:02 +0100)]
mailbox: omap: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:33 +0000 (22:02 +0100)]
mailbox: mtk-cmdq: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:32 +0000 (22:02 +0100)]
mailbox: mailbox-test: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:31 +0000 (22:02 +0100)]
mailbox: imx: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:30 +0000 (22:02 +0100)]
mailbox: bcm-pdc: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 27 Dec 2023 21:02:29 +0000 (22:02 +0100)]
mailbox: bcm-flexrm: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Randy Dunlap [Sat, 16 Dec 2023 00:41:56 +0000 (16:41 -0800)]
mailbox: zynqmp-ipi: fix an Excess struct member kernel-doc warning
kernel test robot reports 2 Excess struct member warnings:
zynqmp-ipi-mailbox.c:92: warning: Excess struct member 'irq' description in 'zynqmp_ipi_mbox'
zynqmp-ipi-mailbox.c:112: warning: Excess struct member 'ipi_mboxes' description in 'zynqmp_ipi_pdata'
The second one is a false positive that is caused by the
__counted_by() attribute. Kees has posted a patch for that, so just
fix the first one.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312150705.glrQ4ypv-lkp@intel.com/ Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Tanmay Shah [Thu, 14 Dec 2023 05:42:27 +0000 (21:42 -0800)]
dt-bindings: mailbox: add Versal IPI bindings
Add documentation for AMD-Xilinx Versal platform Inter Processor Interrupt
controller. Versal IPI controller contains buffer-less IPI which do not
have buffers for message passing. For such IPI channels message buffers
are not expected and only notification to/from remote agent is expected.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Tanmay Shah [Thu, 14 Dec 2023 05:42:25 +0000 (21:42 -0800)]
dt-bindings: mailbox: zynqmp: extend required list
"xlnx,ipi-id" is handled as required property but is
missing from binding doc required list of mailbox child node.
Add that to required list. This does not break backward
compatibility but bug in bindings document.
Fixes: 4a855a957936 ("dt-bindings: mailbox: zynqmp_ipi: convert to yaml") Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Xiaowu.ding [Tue, 12 Dec 2023 11:37:22 +0000 (19:37 +0800)]
mailbox: arm_mhuv2: Fix a bug for mhuv2_sender_interrupt
Message Handling Unit version is v2.1.
When arm_mhuv2 working with the data protocol transfer mode.
We have split one mhu into two channels, and every channel
include four channel windows, the two channels share
one gic spi interrupt.
There is a problem with the sending scenario.
The first channel will take up 0-3 channel windows, and the second
channel take up 4-7 channel windows. When the first channel send the
data, and the receiver will clear all the four channels status.
Although we only enabled the interrupt on the last channel window with
register CH_INT_EN,the register CHCOMB_INT_ST0 will be 0xf, not be 0x8.
Currently we just clear the last channel windows int status with the
data proctol mode.So after that,the CHCOMB_INT_ST0 status will be 0x7,
not be the 0x0.
Then the second channel send the data, the receiver read the
data, clear all the four channel windows status, trigger the sender
interrupt. But currently the CHCOMB_INT_ST0 register will be 0xf7,
get_irq_chan_comb function will always return the first channel.
So this patch clear all channel windows int status to avoid this interrupt
confusion.
mailbox: qcom-apcs-ipc: re-organize compatibles with fallbacks
Similarly to previous commit e17225887005 ("mailbox: qcom-apcs-ipc: do
not grow the of_device_id"), move compatibles with fallbacks in the
of_device_id table, to indicate these are not necessary. This only
shuffles the code. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks
Rework the compatibles and group devices which have similar interface
(same from Linux driver point of view) as compatible. This allows
smaller of_device_id table in the Linux driver and smaller
allOf:if:then: constraints.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Linus pointed out that there's error handling and naming issues in the
that we should rewrite:
* Perform the access checks for the buffer before actually doing any
work instead of doing it during the iteration.
* Rename the arguments to listmount() and do_listmount() to clarify what
the arguments are used for.
* Get rid of the pointless ctr variable and overflow checking.
* Get rid of the pointless speculation check.
Eric Biggers [Sat, 13 Jan 2024 00:57:47 +0000 (16:57 -0800)]
f2fs: fix double free of f2fs_sb_info
kill_f2fs_super() is called even if f2fs_fill_super() fails.
f2fs_fill_super() frees the struct f2fs_sb_info, so it must set
sb->s_fs_info to NULL to prevent it from being freed again.
Fixes: 275dca4630c1 ("f2fs: move release of block devices to after kill_block_super()") Reported-by: <syzbot+8f477ac014ff5b32d81f@syzkaller.appspotmail.com> Closes: https://lore.kernel.org/lkml/0000000000006cb174060ec34502@google.com Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/linux-f2fs-devel/20240113005747.38887-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
Linus Torvalds [Sat, 13 Jan 2024 02:05:56 +0000 (18:05 -0800)]
Merge tag 'exfat-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Replace the internal table lookup algorithm with the hweight library
and ffs of the bitops library.
- Handle the two types of stream entry, valid data size (has been
written) and data size separately. It improves compatibility with two
differently sized files created on Windows.
* tag 'exfat-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: do not zero the extended part
exfat: change to get file size from DataLength
exfat: using ffs instead of internal logic
exfat: using hweight instead of internal logic
Linus Torvalds [Sat, 13 Jan 2024 02:04:01 +0000 (18:04 -0800)]
Merge tag 'pull-bcachefs-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull bcachefs locking fix from Al Viro:
"Fix broken locking in bch2_ioctl_subvolume_destroy()"
* tag 'pull-bcachefs-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
bch2_ioctl_subvolume_destroy(): fix locking
new helper: user_path_locked_at()
Linus Torvalds [Sat, 13 Jan 2024 00:35:58 +0000 (16:35 -0800)]
Merge tag 'rcu.release.v6.8' of https://github.com/neeraju/linux
Pull RCU updates from Neeraj Upadhyay:
- Documentation and comment updates
- RCU torture, locktorture updates that include cleanups; nolibc init
build support for mips, ppc and rv64; testing of mid stall duration
scenario and fixing fqs task creation conditions
- Misc fixes, most notably restricting usage of RCU CPU stall
notifiers, to confine their usage primarily to debug kernels
- RCU tasks minor fixes
- lockdep annotation fix for NMI-safe accesses, callback
advancing/acceleration cleanup and documentation improvements
* tag 'rcu.release.v6.8' of https://github.com/neeraju/linux:
rcu: Force quiescent states only for ongoing grace period
doc: Clarify historical disclaimers in memory-barriers.txt
doc: Mention address and data dependencies in rcu_dereference.rst
doc: Clarify RCU Tasks reader/updater checklist
rculist.h: docs: Fix wrong function summary
Documentation: RCU: Remove repeated word in comments
srcu: Use try-lock lockdep annotation for NMI-safe access.
srcu: Explain why callbacks invocations can't run concurrently
srcu: No need to advance/accelerate if no callback enqueued
srcu: Remove superfluous callbacks advancing from srcu_gp_start()
rcu: Remove unused macros from rcupdate.h
rcu: Restrict access to RCU CPU stall notifiers
rcu-tasks: Mark RCU Tasks accesses to current->rcu_tasks_idle_cpu
rcutorture: Add fqs_holdoff check before fqs_task is created
rcutorture: Add mid-sized stall to TREE07
rcutorture: add nolibc init support for mips, ppc and rv64
locktorture: Increase Hamming distance between call_rcu_chain and rcu_call_chains
While testing UFFDIO_MOVE ioctl, syzbot triggered VM_BUG_ON_PAGE caused by
a call to PageAnonExclusive() with a huge_zero_page as a parameter.
UFFDIO_MOVE does not yet handle zeropages and returns EBUSY when one is
encountered. Add an early huge_zero_page check in the PMD move path to
avoid this situation.
Link: https://lkml.kernel.org/r/20240112013935.1474648-1-surenb@google.com Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI") Reported-by: syzbot+705209281e36404998f6@syzkaller.appspotmail.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / mirror_ubuntu-kernels.git / log