]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/log
mirror_ubuntu-eoan-kernel.git
16 years agopnp: make the resource type an unsigned long
Rene Herman [Thu, 16 Oct 2008 05:03:58 +0000 (22:03 -0700)]
pnp: make the resource type an unsigned long

PnP encodes the resource type directly as its struct resource->flags value
which is an unsigned long.  Make it so...

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopnp: remove printk() with outdated version
Adrian Bunk [Thu, 16 Oct 2008 05:03:57 +0000 (22:03 -0700)]
pnp: remove printk() with outdated version

There's no point in printing some ancient version number forever.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Adam M Belay <abelay@MIT.EDU>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbcon_set_all_vcs: fix kernel crash when switching the rotated consoles
Oleg Nesterov [Thu, 16 Oct 2008 05:03:57 +0000 (22:03 -0700)]
fbcon_set_all_vcs: fix kernel crash when switching the rotated consoles

echo 3 >> /sys/class/graphics/fbcon/rotate_all, then switch to another
console. Result:

BUG: unable to handle kernel paging request at ffffc20005d00000
IP: [bitfill_aligned+149/265] bitfill_aligned+0x95/0x109
PGD 7e228067 PUD 7e229067 PMD 7bc1f067 PTE 0
Oops: 0002 [1] SMP
CPU 1
Modules linked in: [...a lot...]
Pid: 10, comm: events/1 Not tainted 2.6.26.5-45.fc9.x86_64 #1
RIP: 0010:[bitfill_aligned+149/265]  [bitfill_aligned+149/265] bitfill_aligned+0x95/0x109
RSP: 0018:ffff81007d811bc8  EFLAGS: 00010216
RAX: ffffc20005d00000 RBX: 0000000000000000 RCX: 0000000000000400
RDX: 0000000000000000 RSI: ffffc20005d00000 RDI: ffffffffffffffff
RBP: ffff81007d811be0 R08: 0000000000000400 R09: 0000000000000040
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000010000
R13: ffffffff811632f0 R14: 0000000000000006 R15: ffff81007cb85400
FS:  0000000000000000(0000) GS:ffff81007e004780(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffc20005d00000 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process events/1 (pid: 10, threadinfo ffff81007d810000, task ffff81007d808000)
Stack:  ffff81007c9d75a0 0000000000000000 0000000000000000 ffff81007d811c80
 ffffffff81163a61 ffff810000000000 ffffffff8115f9c8 0000001000000000
 0000000100aaaaaa 000000007cd0d4a0 fffffd8a00000800 0001000000000000
Call Trace:
 [cfb_fillrect+523/798] cfb_fillrect+0x20b/0x31e
 [soft_cursor+416/436] ? soft_cursor+0x1a0/0x1b4
 [ccw_clear_margins+205/263] ccw_clear_margins+0xcd/0x107
 [fbcon_clear_margins+59/61] fbcon_clear_margins+0x3b/0x3d
 [fbcon_switch+1291/1466] fbcon_switch+0x50b/0x5ba
 [redraw_screen+261/481] redraw_screen+0x105/0x1e1
 [ccw_cursor+0/1869] ? ccw_cursor+0x0/0x74d
 [complete_change_console+48/190] complete_change_console+0x30/0xbe
 [change_console+115/120] change_console+0x73/0x78
 [console_callback+0/292] ? console_callback+0x0/0x124
 [console_callback+97/292] console_callback+0x61/0x124
 [schedule_delayed_work+25/30] ? schedule_delayed_work+0x19/0x1e
 [run_workqueue+139/282] run_workqueue+0x8b/0x11a
 [worker_thread+221/238] worker_thread+0xdd/0xee
 [autoremove_wake_function+0/56] ? autoremove_wake_function+0x0/0x38
 [worker_thread+0/238] ? worker_thread+0x0/0xee
 [kthread+73/118] kthread+0x49/0x76
 [child_rip+10/18] child_rip+0xa/0x12
 [kthread+0/118] ? kthread+0x0/0x76
 [child_rip+0/18] ? child_rip+0x0/0x12

Because fbcon_set_all_vcs()->FBCON_SWAP() uses display->rotate == 0 instead
of fbcon_ops->rotate, and vc_resize() has no effect because it is called with
new_cols/rows == ->vc_cols/rows.

Tested on 2.6.26.5-45.fc9.x86_64, but
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git seems to
have the same problem.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <stable@kernel.org> [2.6.27.x, 2.6.26.x, maybe 2.6.25.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: add new TMIO framebuffer driver
Dmitry Baryshkov [Thu, 16 Oct 2008 05:03:55 +0000 (22:03 -0700)]
fbdev: add new TMIO framebuffer driver

Add driver for TMIO framebuffer cells as found e.g. in Toshiba TC6393XB
chips.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Acked-by: Samuel Ortiz <sameo@openedhand.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: Epson S1D1 framebuffer maintainer
Kristoffer Ericson [Thu, 16 Oct 2008 05:03:54 +0000 (22:03 -0700)]
fbdev: Epson S1D1 framebuffer maintainer

I'm stepping up as maintainer for the Epson S1D13XXXFB driver since I have
2 platforms currently using it.

Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Acked-by: Thibaut Varene <varenet@parisc-linux.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoframebuffer: fix carminefb section mismatch
Randy Dunlap [Thu, 16 Oct 2008 05:03:53 +0000 (22:03 -0700)]
framebuffer: fix carminefb section mismatch

Make alloc_carmine_fb() __devinit.

WARNING: drivers/video/carminefb.o(.text+0x81b): Section mismatch in reference from the function alloc_carmine_fb() to the variable .devinit.data:carminefb_fix

The function alloc_carmine_fb() references the variable __devinitdata
carminefb_fix.  This is often because alloc_carmine_fb lacks a
__devinitdata annotation or the annotation of carminefb_fix is wrong.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomatroxfb: support G200eV chip
Darrick J. Wong [Thu, 16 Oct 2008 05:03:52 +0000 (22:03 -0700)]
matroxfb: support G200eV chip

Support the Matrox G200eV chip, based on timings that I found in the X.org
matrox driver.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: allow more chip revisions in Epson s1d13... video driver
Kristoffer Ericson [Thu, 16 Oct 2008 05:03:51 +0000 (22:03 -0700)]
fbdev: allow more chip revisions in Epson s1d13... video driver

The Epson s1d13xxx hardware is common in many handhelds, but our driver is
currently locked to a single chip revision.  This patch adds an array of
known to work revisions (which can be extended).

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Acked-by: Thibaut Varène <varenet@parisc-linux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: ignore VESA modes if framebuffer does not support them
Michal Januszewski [Thu, 16 Oct 2008 05:03:51 +0000 (22:03 -0700)]
fbdev: ignore VESA modes if framebuffer does not support them

Currently, it is possible to set a graphics VESA mode at boot time via the
vga= parameter even when no framebuffer driver supporting this is
configured.  This could lead to the system booting with a black screen,
without a usable console.

Fix this problem by only allowing to set graphics modes at boot time if a
supporting framebuffer driver is configured.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agovgacon: vgacon_scrolldelta simplification
Marcin Slusarz [Thu, 16 Oct 2008 05:03:50 +0000 (22:03 -0700)]
vgacon: vgacon_scrolldelta simplification

There's no point in checking diff == c->vc_rows, because it can be true
only when count == 0, but we already checked that.  Additionally move
variables used only in one block to this block.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agovgacon: optimize scrolling
Marcin Slusarz [Thu, 16 Oct 2008 05:03:49 +0000 (22:03 -0700)]
vgacon: optimize scrolling

Join multiple scr_memcpyw into 1-3 calls (usually 2).  (benchmarked
average speedup: 1%)

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbmon: fix EDID parser to detect interlace modes
Jon Dufresne [Thu, 16 Oct 2008 05:03:49 +0000 (22:03 -0700)]
fbmon: fix EDID parser to detect interlace modes

The current EDID parser in the linux kernel ignores interlace modes.  The
patch looks for the edid interlace flag and adjusts the vertical
resolution if it is found.

Signed-off-by: Jon Dufresne <jon.dufresne@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMAINTAINERS: add entry for uvesafb
Michal Januszewski [Thu, 16 Oct 2008 05:03:48 +0000 (22:03 -0700)]
MAINTAINERS: add entry for uvesafb

Add a maintainer entry for the uvesafb driver.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agouvesafb: don't treat mode info retrieval failures as errors
Michal Januszewski [Thu, 16 Oct 2008 05:03:47 +0000 (22:03 -0700)]
uvesafb: don't treat mode info retrieval failures as errors

Some BIOSes return error codes when queried for information about
modes from their own modelist.  uvesafb treats this as an error
case and bails out.

Change this behavior so that broken modes do not prevent the driver
from working.  Only the failure to retrieve information about any
usable video mode is considered to be an error case.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agouvesafb: document mode to mode_option parameter change
Mike Pagano [Thu, 16 Oct 2008 05:03:46 +0000 (22:03 -0700)]
uvesafb: document mode to mode_option parameter change

Document the change from the old "mode" parameter to the "mode_option"
parameter.

Signed-off-by: Mike Pagano <mpagano@gentoo.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoradeonfb: accelerate imageblit and other improvements
Benjamin Herrenschmidt [Thu, 16 Oct 2008 05:03:46 +0000 (22:03 -0700)]
radeonfb: accelerate imageblit and other improvements

Implement support for HW color expansion of 1bpp images, along with some
improvements to the FIFO handling and other accel operations.

The offset fixup code is now unnecessary as the fbcon core will call our
set_par upon switch back from KD_GRAPHICS before anything else happens.  I
removed it as it would slow down accel operations.

The fifo wait has been improved to avoid hitting the HW register as often,
and the various accel ops are now performing better caching of register
values.

Overall, this improve accel performances.  The imageblit acceleration does
result in a small overall regression in performances on some machines (on
the order of 5% on some x86), probably becaus the SW path provides a
better bus utilisation, but I decided to ingnore that as the performances
is still very good, and on the other hand, some machines such as some
sparc64 get a 3 fold performance improvement.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoradeonfb: misc cleanup of engine and dst cache handling
Benjamin Herrenschmidt [Thu, 16 Oct 2008 05:03:44 +0000 (22:03 -0700)]
radeonfb: misc cleanup of engine and dst cache handling

Fix a couple of incomplete tests of the chip families in the engine
init/reset code and proper initialization of the destination cache mode.
The result should better match what the latest X radeon driver does.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoefifb/imacfb consolidation + hardware support
Peter Jones [Thu, 16 Oct 2008 05:03:43 +0000 (22:03 -0700)]
efifb/imacfb consolidation + hardware support

Remove imacfb entirely, merging its DMI table into the (otherwise very
similar) efifb driver.  This also adds hardware support for many of the
newer Intel Apple hardware.  This has been fairly well tested; we've been
shipping it in Fedora for some time.

Signed-off-by: Peter Jones <pjones@redhat.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoatmel_lcdfb: disallow setting larger resolution than the framebuffer memory can handle
Stanislaw Gruszka [Thu, 16 Oct 2008 05:03:43 +0000 (22:03 -0700)]
atmel_lcdfb: disallow setting larger resolution than the framebuffer memory can handle

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocirrusfb: do not change MCLK for Alpine chips
Krzysztof Helt [Thu, 16 Oct 2008 05:03:42 +0000 (22:03 -0700)]
cirrusfb: do not change MCLK for Alpine chips

A memory clock value (MCLK) is changed to a minimum required by a current
mode bandwidth.  This usually lowers the MCLK to its minimum (50 MHz) thus
decreasing the card performance.  Just leave the MCLK value set by card
BIOS.

The CL-GD5446 Technical Reference Manual point 9.9.1.3 states that if a
pixclock value is close (~1%) to the MCLK or MCLK/2 this may result in a
jitter on the screen.  A countermeasure is to use the MCLK as pixclock
source instead of a VCLK.  The patch implements this as well.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocirrusfb: fix 16bpp modes
Krzysztof Helt [Thu, 16 Oct 2008 05:03:41 +0000 (22:03 -0700)]
cirrusfb: fix 16bpp modes

The 16bpp mode did not work on the Cirrus cards as the visual type was set
to DIRECTCOLOR instead of TRUECOLOR.  The Alpine family used one incorrect
register setting so this 16bpp modes generated wrong horizontal frequency.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocirrusfb: add noaccel module parameter
Krzysztof Helt [Thu, 16 Oct 2008 05:03:41 +0000 (22:03 -0700)]
cirrusfb: add noaccel module parameter

The noaccel parameter is already handled if the driver is not built as
module.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocirrusfb: drop clock fields from cirrusfb_regs structure
Krzysztof Helt [Thu, 16 Oct 2008 05:03:40 +0000 (22:03 -0700)]
cirrusfb: drop clock fields from cirrusfb_regs structure

Move call to pixclock calculation into the cirrusfb_set_par_foo().  It
makes copy of clock registers redundant.

Simplify clock calculations further.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocirrusfb: eliminate CRT registers from global structure
Krzysztof Helt [Thu, 16 Oct 2008 05:03:39 +0000 (22:03 -0700)]
cirrusfb: eliminate CRT registers from global structure

Move calculations of CRT register values into the cirrusfb_set_par_foo()
where the values are used.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocirrusfb: add __devinit attribute to probing functions
Krzysztof Helt [Thu, 16 Oct 2008 05:03:39 +0000 (22:03 -0700)]
cirrusfb: add __devinit attribute to probing functions

Add __devinit attribute to probing functions.  This fixed section mismatch
warning from my previous patch.

Kill one redundant forward declaration.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocirrusfb: use modedb and add mode_option parameter
Krzysztof Helt [Thu, 16 Oct 2008 05:03:38 +0000 (22:03 -0700)]
cirrusfb: use modedb and add mode_option parameter

Use modedb for initial mode instead of table of few predefined modes.

Add mode_option module parameter as a step toward unification of frame
buffers' parameters.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocirrusfb: drop device pointers from cirrusfb_info
Krzysztof Helt [Thu, 16 Oct 2008 05:03:38 +0000 (22:03 -0700)]
cirrusfb: drop device pointers from cirrusfb_info

The device pointer can be easily obtained from fb_info->device if needed.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocirrusfb: remove 24 bpp mode
Krzysztof Helt [Thu, 16 Oct 2008 05:03:37 +0000 (22:03 -0700)]
cirrusfb: remove 24 bpp mode

The 24 bpp mode is not implemented.  Disallow it in the
cirrusfb_check_var() and remove it from checks.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocirrusfb: simplify clock calculation
Krzysztof Helt [Thu, 16 Oct 2008 05:03:36 +0000 (22:03 -0700)]
cirrusfb: simplify clock calculation

Simplify clock calculation.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocirrusfb: remove information about memory size during mode change
Krzysztof Helt [Thu, 16 Oct 2008 05:03:36 +0000 (22:03 -0700)]
cirrusfb: remove information about memory size during mode change

Remove information about memory size displayed twice each time a display
mode change.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agointelfb: support 945GME (as used in ASUS Eee 901)
Phil Endecott [Thu, 16 Oct 2008 05:03:35 +0000 (22:03 -0700)]
intelfb: support 945GME (as used in ASUS Eee 901)

Add support for Intel's 945GME graphics chip to the intelfb driver.  I
have assumed that the 945GME is identical to the already-supported 945GM
apart from its PCI IDs; this is based on a quick look at the X driver for
these chips which seems to treat them identically.

The 945GME is used in the ASUS Eee 901, and I coded this in the hope that
I'd be able to use it to get a console at the native 1024x600 resolution
which is not known to the BIOS.  I realised too late that the intelfb
driver does not support mode changing on laptops, so it won't be any
use for me.

Signed-off-by: Phil Endecott <spam_from_intelfb@chezphil.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agotdfxfb: do not make changes to default tdfx_fix
Krzysztof Helt [Thu, 16 Oct 2008 05:03:34 +0000 (22:03 -0700)]
tdfxfb: do not make changes to default tdfx_fix

This was suggested by Geert Uytterhoeven to avoid overwriting of default
values from the tdfx_fix.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoneofb: remove open_lock mutex
Krzysztof Helt [Thu, 16 Oct 2008 05:03:33 +0000 (22:03 -0700)]
neofb: remove open_lock mutex

Remove mutex from the fb_open/fb_release functions as these operations are
mutexed at fb layer.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agovga16fb: remove open_lock mutex
Krzysztof Helt [Thu, 16 Oct 2008 05:03:33 +0000 (22:03 -0700)]
vga16fb: remove open_lock mutex

Remove mutex from the fb_open/fb_release functions as these operations are
mutexed at fb layer.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoneofb: kill some redundant code
Krzysztof Helt [Thu, 16 Oct 2008 05:03:32 +0000 (22:03 -0700)]
neofb: kill some redundant code

Move common code outside if/else or switch/case clauses.

Drop checks done twice inside the neofb_check_var().

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: kconfig update
Krzysztof Helt [Thu, 16 Oct 2008 05:03:32 +0000 (22:03 -0700)]
fbdev: kconfig update

Update Kconfig for Permedia 2, Trident and 3Dfx frame buffer drivers.

[akpm@linux-foundation.org: fix Kconfig text]
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: MAINTAINERS entry
Joseph Chan [Thu, 16 Oct 2008 05:03:31 +0000 (22:03 -0700)]
viafb: MAINTAINERS entry

Add maintainers for VIA UniChrome(Pro)/Chrome9 Framebuffer driver

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Signed-off-by: Scott Fang <ScottFang@viatech.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: via_utility.c, via_utility.h, vt1636.c, vt1636.h
Joseph Chan [Thu, 16 Oct 2008 05:03:30 +0000 (22:03 -0700)]
viafb: via_utility.c, via_utility.h, vt1636.c, vt1636.h

via_utility.c, via_utility.h: support user mode application with
additional information vt1636.c, vt1636.h: setting for chip vt1636

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: via_i2c.c, via_i2c.h, viamode.c, viamode.h
Joseph Chan [Thu, 16 Oct 2008 05:03:29 +0000 (22:03 -0700)]
viafb: via_i2c.c, via_i2c.h, viamode.c, viamode.h

via_i2c.c, via_i2c.h: Implement i2c specification.
viamode.c, viamode.c: all support modes information.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: viafbdev.c (update)
Joseph Chan [Thu, 16 Oct 2008 05:03:29 +0000 (22:03 -0700)]
viafb: viafbdev.c (update)

Remove the macro MMIO_OUT32, and replace it with writel() function.
And replace "u32" with "unsigned long" in writel() function (original
MMIO_OUT32 marco) for avoiding warning message in 64bit OS.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: viafbdev.c, viafbdev.h
Joseph Chan [Thu, 16 Oct 2008 05:03:27 +0000 (22:03 -0700)]
viafb: viafbdev.c, viafbdev.h

Correct by following Jiri Slaby's suggestions.

Initialization, remove and some other important functions of viafb.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: tbl1636.c, tbl1636.h, tblDPASetting.c, tblDPASetting.h
Joseph Chan [Thu, 16 Oct 2008 05:03:27 +0000 (22:03 -0700)]
viafb: tbl1636.c, tbl1636.h, tblDPASetting.c, tblDPASetting.h

tbl1636.c, tbl1636.h: patch setting for VT1636.
tblDPASetting.c, tblDPASetting.h: patch for graphic clock skew.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: Makefile, share.h
Joseph Chan [Thu, 16 Oct 2008 05:03:26 +0000 (22:03 -0700)]
viafb: Makefile, share.h

Makefile for drivers/video/via/
share.h: shared macro for viafb

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: lcd.c, lcd.h, lcdtbl.h
Joseph Chan [Thu, 16 Oct 2008 05:03:25 +0000 (22:03 -0700)]
viafb: lcd.c, lcd.h, lcdtbl.h

lcd.c, lcd.h: LVDS generic process.
lcdtbl.h: patch register for simultaneous case.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: iface.c, iface.h, ioctl.c, ioctl.h
Joseph Chan [Thu, 16 Oct 2008 05:03:24 +0000 (22:03 -0700)]
viafb: iface.c, iface.h, ioctl.c, ioctl.h

iface.c, iface.h: support getting video memory from backdoor.
ioctl.c, ioctl.h: support user mode application with additional information

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: hw.c, hw.h
Joseph Chan [Thu, 16 Oct 2008 05:03:23 +0000 (22:03 -0700)]
viafb: hw.c, hw.h

Display HW setting and other chips initialization.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: dvi.c, dvi.h, global.c and global.h
Joseph Chan [Thu, 16 Oct 2008 05:03:23 +0000 (22:03 -0700)]
viafb: dvi.c, dvi.h, global.c and global.h

dvi.c, dvi.h: TMDS generic process and setting.
global.c, global.h: define global variabls.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: chip.h, debug.h
Joseph Chan [Thu, 16 Oct 2008 05:03:22 +0000 (22:03 -0700)]
viafb: chip.h, debug.h

Header file of information about via chipsets and debug function.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: accel.c, accel.h
Joseph Chan [Thu, 16 Oct 2008 05:03:21 +0000 (22:03 -0700)]
viafb: accel.c, accel.h

2D and HW cursor stuff of viafb driver.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: Makefile, Kconfig
Joseph Chan [Thu, 16 Oct 2008 05:03:20 +0000 (22:03 -0700)]
viafb: Makefile, Kconfig

Modified drivers/video/Makefile and drivers/video/Kconfig.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoviafb: viafb.modes, viafb.txt
Joseph Chan [Thu, 16 Oct 2008 05:03:19 +0000 (22:03 -0700)]
viafb: viafb.modes, viafb.txt

Correct via_fb_ to viafb_ and remove the Kconfig part in viafb.txt.

viafb.modes: supported mode table
viafb.txt: documentation of viafb driver

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoneofb: reduce panning function
Krzysztof Helt [Thu, 16 Oct 2008 05:03:17 +0000 (22:03 -0700)]
neofb: reduce panning function

Reduce panning function by deleting checks done by higher layer and
folding remaining function into the called one.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoradeonfb: revert "Fix radeon DDC regression"
Jean Delvare [Thu, 16 Oct 2008 05:03:17 +0000 (22:03 -0700)]
radeonfb: revert "Fix radeon DDC regression"

The bug was in fb_ddc and was fixed by commit
b64d70825abbf706bbe80be1b11b09514b71f45e (fb_ddc: fix DDC lines quirk) so
the workaround in radeonfb can be removed now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogpiolib: request/free hooks
David Brownell [Thu, 16 Oct 2008 05:03:16 +0000 (22:03 -0700)]
gpiolib: request/free hooks

Add a new internal mechanism to gpiolib to support low power
operations by letting gpio_chip instances see when their GPIOs
are in use.  When no GPIOs are active, chips may be able to
enter lower powered runtime states by disabling clocks and/or
power domains.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: "Magnus Damm" <magnus.damm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoomap drivers: switch to standard GPIO calls
David Brownell [Thu, 16 Oct 2008 05:03:15 +0000 (22:03 -0700)]
omap drivers: switch to standard GPIO calls

This updates most of the OMAP drivers which are in mainline to switch to
using the cross-platform GPIO calls instead of the older OMAP-specific
ones.

This is all fairly brainless/obvious stuff.  Probably the most interesting
bit is to observe that the omap-keypad code seems to now have a portable
core that could work with non-OMAP matrix keypads.  (That would improve
with hardware IRQ debouncing enabled, of course...)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogpiolib: gpio_to_irq() hooks
David Brownell [Thu, 16 Oct 2008 05:03:14 +0000 (22:03 -0700)]
gpiolib: gpio_to_irq() hooks

Add a new gpiolib mechanism: gpio_chip instances can provide mappings
between their (input) GPIOs and any associated IRQs.  This makes it easier
for platforms to support IRQs that are provided by board-specific external
chips instead of as part of their core (such as SOC-integrated GPIOs).

Also update the irq_to_gpio() description, saying to avoid it because it's
not always supported.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogpio: i2c expanders use subsys_init
David Brownell [Thu, 16 Oct 2008 05:03:13 +0000 (22:03 -0700)]
gpio: i2c expanders use subsys_init

Make the I2C external GPIO expander drivers register themselves at
subsys_initcall() time when they're statically linked.

SOC-integrated GPIOs are available starting very early -- early in
arch_initcall() at latest, but often even before initcalls start to run --
so this improves consistency, so more subsystems can rely on GPIOs in
their own subsys_initcall() code.

(This isn't a theoretical problem.  This is one of several patches needed
to resolve oopsing observed when statically linking kernels on a DaVinci
EVM.  Its pcf857x GPIOs needed to be available well before some other
drivers initialized.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogpio_free might sleep, generic part
Uwe Kleine-König [Thu, 16 Oct 2008 05:03:12 +0000 (22:03 -0700)]
gpio_free might sleep, generic part

According to the documentation gpio_free should only be called from task
context only.  To make this more explicit add a might sleep to all
implementations.

This is the generic part which changes gpiolib and the fallback
implementation only.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogpio: max7301: fix the race between chip addition and pins reconfiguration
Dmitry Baryshkov [Thu, 16 Oct 2008 05:03:11 +0000 (22:03 -0700)]
gpio: max7301: fix the race between chip addition and pins reconfiguration

There is a small race and code ugliness in max7301: pins are reconfigured
after the chip is registered.  Swap these calls so that the device is
registered in correct state.

Also this fixes the comile-time warning about unchecked gpiochip_remove.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Juergen Beisert <j.beisert@pengutronix.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogpio: make gpiochip label const
Dmitry Baryshkov [Thu, 16 Oct 2008 05:03:10 +0000 (22:03 -0700)]
gpio: make gpiochip label const

Mark gpiochip label as a const char pointer.  Fixes things like

arch/arm/common/scoop.c: In function `scoop_probe':
arch/arm/common/scoop.c:250: warning: assignment discards qualifiers from pointer target type

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc-ds1672 new style driver
Alessandro Zummo [Thu, 16 Oct 2008 05:03:10 +0000 (22:03 -0700)]
rtc-ds1672 new style driver

New style conversion and reformatting as per indent --linux-style

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc-max6900 new style driver
Alessandro Zummo [Thu, 16 Oct 2008 05:03:08 +0000 (22:03 -0700)]
rtc-max6900 new style driver

New style conversion and reformatting as per indent --linux-style

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Dale Farnsworth <dale@farnsworth.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc-at91rm9200: remove now-unneeded code
Andrew Victor [Thu, 16 Oct 2008 05:03:08 +0000 (22:03 -0700)]
rtc-at91rm9200: remove now-unneeded code

The non-functional periodic IRQ support was previously removed from the
AT91RM9200 RTC driver.  Remove the remaining AT91_RTC_FREQ definition.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Cc: David Brownell: <david-b@pacbell.net>
Cc: Alessandro Zummo: <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc: rtc-m41t80.c: add support for the ST M41T65 RTC
Steven A. Falco [Thu, 16 Oct 2008 05:03:07 +0000 (22:03 -0700)]
rtc: rtc-m41t80.c: add support for the ST M41T65 RTC

Add support for M41T65 Real Time Clock chip.

The main differences I see between the M41T65 and M41T80 are that:

1) The M41T65 watchdog timer has three bits controlling resolution
   (versus two for the M41T80).

2) There is no register 0x13 for controlling square-wave output.

Signed-off-by: Steven A. Falco <sfalco@harris.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc: use CONFIG_PPC instead of CONFIG_PPC_MERGE
Kumar Gala [Thu, 16 Oct 2008 05:03:06 +0000 (22:03 -0700)]
rtc: use CONFIG_PPC instead of CONFIG_PPC_MERGE

Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all
powerpc platforms and we want to get rid of it use CONFIG_PPC instead.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc: file close() consistently disables repeating irqs
David Brownell [Thu, 16 Oct 2008 05:03:04 +0000 (22:03 -0700)]
rtc: file close() consistently disables repeating irqs

Make the rtc framework consistent about disabling 1/second update IRQs
that may have been activated through the /dev interface, when that /dev
file is closed.  (It may have closed because of coredump, etc.) This was
previously done only for emulated update IRQs ...  now, do it always.

Also comment the current policy: repeating IRQs (periodic, update) that
userspace enabled will be cleanly disabled, but alarms are left alone.
Such repeating IRQs are a constant and pointless system load.

Update some RTC drivers to remove now-needless release() methods.  Most
such methods just enforce that policy.  The others all seem to be buggy,
and mistreat in-kernel clients of periodic or alarm IRQs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Sharp <andy.sharp@onstor.com>
Cc: Angelo Castello <angelo.castello@st.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Thomas Hommel <thomas.hommel@gefanuc.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc: rtc-rs5c372: add support for Ricoh R2025S/D RTC
Paul Mundt [Thu, 16 Oct 2008 05:03:03 +0000 (22:03 -0700)]
rtc: rtc-rs5c372: add support for Ricoh R2025S/D RTC

This adds support for the Ricoh R2025S/D series of I2C RTCs, produced by
Ricoh Japan and described at:

http://www.ricoh.co.jp/LSI/product_rtc/2wire/r2025x/

This series has very minor deviations from the rest of the RS5C chips,
most of which have to do with the oscillator, which was abstracted away in
an earlier patch.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Brownell <david-b@pacbell.net>
Tested-by: Riku Voipio <riku.voipio@movial.fi>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc: rtc-rs5c372: SMBus conversion/support
Paul Mundt [Thu, 16 Oct 2008 05:03:01 +0000 (22:03 -0700)]
rtc: rtc-rs5c372: SMBus conversion/support

rtc-rs5c372 presently depends on I2C master mode transfers, despite the
fact that these RTCs frequently find themselves on SMBus-only adapters.

Given that the only capabilities that were checked were for I2C_FUNC_I2C,
it's assumed that most of the adapters that are currently using this
driver are fairly sane, and are able to handle SMBus emulation (though we
adjust the default capabilities to check for I2C_FUNC_SMBUS_EMUL anyways,
which is the vast majority of them.  The adapters that don't have their
own ->smbus_xfer() fall back on the ->master_xfer() through the emulated
transfer).

The special case is iop3xx, which has more than its fair share of hacks
within this driver, it remains untested -- though also claims to support
emulated SMBus accesses.  The corner case there is rs5c_get_regs() which
uses access mode #3 for transferring the register state, while we use mode
#1 for SMBus.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Brownell <david-b@pacbell.net>
Tested-by: Riku Voipio <riku.voipio@movial.fi>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolegacy rtc: remove needless/confusing HPET_RTC_IRQ option
David Brownell [Thu, 16 Oct 2008 05:03:00 +0000 (22:03 -0700)]
legacy rtc: remove needless/confusing HPET_RTC_IRQ option

HPET_RTC_IRQ is no longer needed; HPET_EMULATE_RTC suffices and is more
correct.  (http://bugzilla.kernel.org/show_bug.cgi?id=11111)

Note that when using the legacy RTC driver, platforms don't really do a
dynamic switch between HPET and non-HPET modes based on whether HPET
hardware actually exists ...  only rtc-cmos (using the new RTC framework)
currently switches that way.

So this reflects bitrot in that legacy code, for x86/ia64: kernels with
HPET support configured (e.g.  for a clocksource) can't get IRQs from the
legacy RTC driver unless they really have HPET hardware.  (The obvious
workaround is to not use the legacy RTC driver on those platforms when you
configure HPET ...  unless you know the target really has a HPET.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc: remove some NOP open/release methods
David Brownell [Thu, 16 Oct 2008 05:02:59 +0000 (22:02 -0700)]
rtc: remove some NOP open/release methods

Remove NOP methods from rtc-pl030 and rtc-pl031 drivers;
this is pure wasted code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc-ds1307: alarm support for ds1337/ds1339
Rodolfo Giometti [Thu, 16 Oct 2008 05:02:58 +0000 (22:02 -0700)]
rtc-ds1307: alarm support for ds1337/ds1339

Update the ds1307 driver with alarm support for ds1337/ds1339.  This uses
the first alarm (there are two), and matches on seconds, minutes, hours,
and day-of-month.  Tested on ds1339.

[dbrownell@users.sourceforge.net: add comments; fixup style, valid irq
checks, debug dumps; lock; more careful IRQ shutdown; switch BCD2BIN to
bcd2bin (and vice versa); ENOTTY not EINVAL.]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc: add device driver for Dallas DS3234 SPI RTC chip
Dennis Aberilla [Thu, 16 Oct 2008 05:02:57 +0000 (22:02 -0700)]
rtc: add device driver for Dallas DS3234 SPI RTC chip

Add support for the Dallas DS3234 chip - extremely accurate SPI bus RTC
with integrated crystal and SRAM.

[akpm@linux-foundation.org: don't use BIN2BCD/BCD2BIN]
Signed-off-by: Dennis Aberilla <denzzzhome@yahoo.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc: DS1374 wakeup support
Marc Pignat [Thu, 16 Oct 2008 05:02:56 +0000 (22:02 -0700)]
rtc: DS1374 wakeup support

Wakeup support implementation.

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc-pcf8563: remove client validation
Laurent Pinchart [Thu, 16 Oct 2008 05:02:55 +0000 (22:02 -0700)]
rtc-pcf8563: remove client validation

Validating clients with black magic register checks doesn't make much
sense for new-style i2c driver and has been known to fail on valid NXP
pcf8563 chips.  This patch removes the client validation code.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoautofs4: add miscellaneous device for ioctls
Ian Kent [Thu, 16 Oct 2008 05:02:54 +0000 (22:02 -0700)]
autofs4: add miscellaneous device for ioctls

Add a miscellaneous device to the autofs4 module for routing ioctls.  This
provides the ability to obtain an ioctl file handle for an autofs mount
point that is possibly covered by another mount.

The actual problem with autofs is that it can't reconnect to existing
mounts.  Immediately one things of just adding the ability to remount
autofs file systems would solve it, but alas, that can't work.  This is
because autofs direct mounts and the implementation of "on demand mount
and expire" of nested mount trees have the file system mounted on top of
the mount trigger dentry.

To resolve this a miscellaneous device node for routing ioctl commands to
these mount points has been implemented in the autofs4 kernel module and a
library added to autofs.  This provides the ability to open a file
descriptor for these over mounted autofs mount points.

Please refer to Documentation/filesystems/autofs4-mount-control.txt for a
discussion of the problem, implementation alternatives considered and a
description of the interface.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoautofs4: device node ioctl documentation
Ian Kent [Thu, 16 Oct 2008 05:02:53 +0000 (22:02 -0700)]
autofs4: device node ioctl documentation

Add documentation for the miscellaneous device module of autofs4.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoautofs4: track uid and gid of last mount requester
Ian Kent [Thu, 16 Oct 2008 05:02:52 +0000 (22:02 -0700)]
autofs4: track uid and gid of last mount requester

Track the uid and gid of the last process to request a mount for on an
autofs dentry.

[akpm@linux-foundation.org: fix tpyo in comment]
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoautofs4: cleanup autofs mount type usage
Ian Kent [Thu, 16 Oct 2008 05:02:52 +0000 (22:02 -0700)]
autofs4: cleanup autofs mount type usage

Usage of the AUTOFS_TYPE_* defines is a little confusing and appears
inconsistent.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoeCryptfs: remove netlink transport
Tyler Hicks [Thu, 16 Oct 2008 05:02:51 +0000 (22:02 -0700)]
eCryptfs: remove netlink transport

The netlink transport code has not worked for a while and the miscdev
transport is a simpler solution.  This patch removes the netlink code and
makes the miscdev transport the only eCryptfs kernel to userspace
transport.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoecryptfs: convert to use new aops
Badari Pulavarty [Thu, 16 Oct 2008 05:02:50 +0000 (22:02 -0700)]
ecryptfs: convert to use new aops

Convert ecryptfs to use write_begin/write_end

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoeCryptfs: remove retry loop in ecryptfs_readdir()
Michael Halcrow [Thu, 16 Oct 2008 05:02:49 +0000 (22:02 -0700)]
eCryptfs: remove retry loop in ecryptfs_readdir()

The retry block in ecryptfs_readdir() has been in the eCryptfs code base
for a while, apparently for no good reason.  This loop could potentially
run without terminating.  This patch removes the loop, instead erroring
out if vfs_readdir() on the lower file fails.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Reported-by: Al Viro <viro@ZinIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoi2o: Fix 32/64bit DMA locking
Alan Cox [Thu, 16 Oct 2008 05:02:47 +0000 (22:02 -0700)]
i2o: Fix 32/64bit DMA locking

The I2O ioctls assume 32bits.  In itself that is fine as they are old
cards and nobody uses 64bit.  However on LKML it was noted this
assumption is also made for allocated memory and is unsafe on 64bit
systems.

Fixing this is a mess.  It turns out there is tons of crap buried in a
header file that does racy 32/64bit filtering on the masks.

So we:
- Verify all callers of the racy code can sleep (i2o_dma_[re]alloc)
- Move the code into a new i2o/memory.c file
- Remove the gfp_mask argument so nobody can try and misuse the function
- Wrap a mutex around the problem area (a single mutex is easy to do and
  none of this is performance relevant)
- Switch the remaining problem kmalloc holdout to use i2o_dma_alloc

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Vasily Averin <vvs@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agospi: core and gpio expanders use subsys_init
David Brownell [Thu, 16 Oct 2008 05:02:46 +0000 (22:02 -0700)]
spi: core and gpio expanders use subsys_init

Make the SPI external GPIO expander drivers register themselves at
subsys_initcall() time when they're statically linked, and make the SPI
core do its driver model initialization earlier so that's safe.

SOC-integrated GPIOs are available starting very early -- often before
initcalls start to run, or earily in arch_initcall() at latest -- so this
improves consistency, letting more subsystems rely on GPIOs being usable
by their own subsys_initcall() code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoorion_spi: handle 88F6183 erratum
Lennert Buytenhek [Thu, 16 Oct 2008 05:02:44 +0000 (22:02 -0700)]
orion_spi: handle 88F6183 erratum

Add support to orion_spi for the 88F6183 ARM SoC by adding code to work
around a 6183-specific erratum.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopxa2xx_spi: fix chip_info defaults and documentation.
Vernon Sauder [Thu, 16 Oct 2008 05:02:43 +0000 (22:02 -0700)]
pxa2xx_spi: fix chip_info defaults and documentation.

Make the chip info structure data optional by providing reasonable
defaults.  Improve corresponding documentation, and highlight the drawback
of not providing explicit chipselect control.

DMA can determine appropriate dma_burst_size and thresholds automatically
so use DMA even if dma_burst_size is not specified.

Signed-off-by: Vernon Sauder <VernonInHand@gmail.com>
Reviewed-by: Ned Forrester <nforrester@whoi.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopxa2xx_spi: minor cleanup
Guennadi Liakhovetski [Thu, 16 Oct 2008 05:02:42 +0000 (22:02 -0700)]
pxa2xx_spi: minor cleanup

Minor fixes: remove redundant local variable initialization, fix "can not"
to what I _think_ is a preferred spelling, output IRQ number if requesting
it failed.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agospi_s3c24xx: pin configuration updates
Ben Dooks [Thu, 16 Oct 2008 05:02:41 +0000 (22:02 -0700)]
spi_s3c24xx: pin configuration updates

Add a pin configuration callback for the s3c24xx SPI driver, as there are
several options depending on the channel and the chip in use.

This is needed as the controller may not have been setup by the initial
bootloader and the fact that the SPI controller gets reset over
suspend/resume into slave mode but the GPIO function registers do not.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agospi: simplify spi_write_then_read()
Vernon Sauder [Thu, 16 Oct 2008 05:02:40 +0000 (22:02 -0700)]
spi: simplify spi_write_then_read()

Modify spi_write_then_read() to use one transfer.  This speeds up all
callers, and is a minor code shrink.

Signed-off-by: Vernon Sauder <Vernon.Sauder@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agompc52xx_psc_spi: remove code associated with !CONFIG_PPC_MERGE
Kumar Gala [Thu, 16 Oct 2008 05:02:39 +0000 (22:02 -0700)]
mpc52xx_psc_spi: remove code associated with !CONFIG_PPC_MERGE

Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore
remove the dead code associated with !CONFIG_PPC_MERGE.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoAllow recursion in binfmt_script and binfmt_misc
Kirill A. Shutemov [Thu, 16 Oct 2008 05:02:39 +0000 (22:02 -0700)]
Allow recursion in binfmt_script and binfmt_misc

binfmt_script and binfmt_misc disallow recursion to avoid stack overflow
using sh_bang and misc_bang.  It causes problem in some cases:

$ echo '#!/bin/ls' > /tmp/t0
$ echo '#!/tmp/t0' > /tmp/t1
$ echo '#!/tmp/t1' > /tmp/t2
$ chmod +x /tmp/t*
$ /tmp/t2
zsh: exec format error: /tmp/t2

Similar problem with binfmt_misc.

This patch introduces field 'recursion_depth' into struct linux_binprm to
track recursion level in binfmt_misc and binfmt_script.  If recursion
level more then BINPRM_MAX_RECURSION it generates -ENOEXEC.

[akpm@linux-foundation.org: make linux_binprm.recursion_depth a uint]
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoalpha: introduce field 'taso' into struct linux_binprm
Kirill A. Shutemov [Thu, 16 Oct 2008 05:02:37 +0000 (22:02 -0700)]
alpha: introduce field 'taso' into struct linux_binprm

This change is Alpha-specific.  It adds field 'taso' into struct
linux_binprm to remember if the application is TASO.  Previously, field
sh_bang was used for this purpose.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agobinfmt_som.c: add MODULE_LICENSE
Adrian Bunk [Thu, 16 Oct 2008 05:02:37 +0000 (22:02 -0700)]
binfmt_som.c: add MODULE_LICENSE

Add the missing MODULE_LICENSE("GPL").

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocheckpatch: version: 0.24
Andy Whitcroft [Thu, 16 Oct 2008 05:02:36 +0000 (22:02 -0700)]
checkpatch: version: 0.24

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocheckpatch: allow for comments either side of a brace on case
Andy Whitcroft [Thu, 16 Oct 2008 05:02:36 +0000 (22:02 -0700)]
checkpatch: allow for comments either side of a brace on case

When specifying case we may have comments and/or braces at the end without
actually having a 'statement'.  Allow for these to occur in any order.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocheckpatch: suspect indent handle macro continuation
Andy Whitcroft [Thu, 16 Oct 2008 05:02:35 +0000 (22:02 -0700)]
checkpatch: suspect indent handle macro continuation

When ignoring a macro in the middle of a conditional, we need to ignore
the macro start and any continuation lines.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocheckpatch: trailing statements ensure we report the end of the line
Andy Whitcroft [Thu, 16 Oct 2008 05:02:34 +0000 (22:02 -0700)]
checkpatch: trailing statements ensure we report the end of the line

When reporting some complex trailing statements we report only the
starting line of the error, that tends to imply the shown line is in error
and confuse the reader.  As we do know where the actual error is report
that line too with an appropriate gap marker where applicable.

    #ERROR: trailing statements should be on next line
    #1: FILE: Z202.c:1:
    +       for (pbh = page_buffers(bh->b_page); pbh != bh;
    +               pbh = pbh->b_this_page, key++);
    #ERROR: trailing statements should be on next line
    #4: FILE: Z202.c:4:
    +       for (pbh = page_buffers(bh->b_page);
    [...]
    +               pbh = pbh->b_this_page, key++);

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocheckpatch: DEFINE_ macros are real definitions for exports
Andy Whitcroft [Thu, 16 Oct 2008 05:02:34 +0000 (22:02 -0700)]
checkpatch: DEFINE_ macros are real definitions for exports

When we want to confirm an export is directly after its definition we need
to allow for DEFINE_ style macros.  Add these to the execeptions.
Refactor the exceptions.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocheckpatch: complex macros checks miss square brackets
Andy Whitcroft [Thu, 16 Oct 2008 05:02:33 +0000 (22:02 -0700)]
checkpatch: complex macros checks miss square brackets

We are missing 'simple' values which include square brackets.  Refactor to
ensure we handle nesting correctly and detect these simple forms.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocheckpatch: suspect code indent must stop at #else/#elif
Andy Whitcroft [Thu, 16 Oct 2008 05:02:32 +0000 (22:02 -0700)]
checkpatch: suspect code indent must stop at #else/#elif

When we hit and #else or #elif we know we are meeting an alternative piece
of code.  All bets are off on indent if we did not see the open of the
control so stop checking.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocheckpatch: pull out known acceptable typedefs
Andy Whitcroft [Thu, 16 Oct 2008 05:02:32 +0000 (22:02 -0700)]
checkpatch: pull out known acceptable typedefs

Within the type checker we have a number of common kernel types which must
be implemented as typedefs.  Pull those out so that we can use the same
expressions to trigger exclusions.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>