[SCSI] megaraid_sas: addded support for big endian architecture
This patch will add big endian architecture support to megaraid_sas
driver. The support added is for LSI MegaRAID all generation controllers-
(3Gb/s, 6Gb/s and 12 Gb/s controllers).
We have done basic sanity test @ppc64 arch and @x86_64. Additional
testing/observations are welcome.
[jejb: fix up rejections] Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Mike Miller [Wed, 4 Sep 2013 20:11:10 +0000 (15:11 -0500)]
[SCSI] hpsa: housekeeping patch for device_id and product arrays
This patch does a bit of housekeeping for hpsa. Change lowercase alpha hex
digits to uppercase for consistency within the driver. Also moves the P822se
in the tables to keep controllers of each family grouped together.
Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Seungwon Jeon [Sat, 31 Aug 2013 16:10:24 +0000 (21:40 +0530)]
[SCSI] ufs: configure the attribute for power mode
UIC attributes can be set with using DME_SET command for
power mode change. For configuration the link capability
attributes are used, which is updated after successful
link startup.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Seungwon Jeon [Sat, 31 Aug 2013 16:10:22 +0000 (21:40 +0530)]
[SCSI] ufs: add operation for the uic power mode change
Setting PA_PWRMode using DME_SET triggers the power mode
change. And then the result will be given by the HCS.UPMCRS.
This operation should be done atomically.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Tested-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Seungwon Jeon [Sat, 31 Aug 2013 16:10:21 +0000 (21:40 +0530)]
[SCSI] ufs: add dme configuration primitives
Implements to support GET and SET operations of the DME.
These operations are used to configure the behavior of
the UNIPRO. Along with basic operation, {Peer/AttrSetType}
can be mixed.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Tested-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Seungwon Jeon [Sat, 31 Aug 2013 16:10:20 +0000 (21:40 +0530)]
[SCSI] ufs: fix the setting interrupt aggregation counter
IACTH(Interrupt aggregation counter threshold) value is allowed
up to 0x1F and current setting value is the maximum.
This value is related with NUTRS(max:0x20) of HCI's capability.
Considering HCI controller doesn't support the maximum, IACTH
setting should be adjusted with possible value.
For that, existing 'ufshcd_config_int_aggr' is split into two part
[reset, configure].
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Tested-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Seungwon Jeon [Sat, 31 Aug 2013 16:10:19 +0000 (21:40 +0530)]
[SCSI] ufs: find out sense data over scsi status values
Unlike 'GOOD' and 'CHECK CONDITION', other status values in
Response UPIU may or may not contain sense data. That is returning
sense data isn't obvious. So, in this case the Data Segment Length
field should be checked. If a non-zero value, it means that UPIU
has Sense Data in the Data Segment area.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Tested-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] Allow MPT Fusion SAS 3.0 driver to be built into the kernel
Right now the Makefile for the mpt3sas driver does not even allow the
driver to be built into the kernel. So fix that up, as there doesn't
seem to be any obvious reason why this shouldn't be done.
Brian King [Tue, 20 Aug 2013 16:08:42 +0000 (11:08 -0500)]
[SCSI] ibmvfc: Fix for offlining devices during error recovery
This fixes an issue seen with devices getting marked offline
in a scenario where a VIOS was getting rebooted while a
client VFC adapter is in SCSI EH and prevents unnecessary
EH escalation in some scenarios.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Acked-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Bradley Grove [Thu, 5 Sep 2013 17:08:00 +0000 (13:08 -0400)]
[SCSI] esas2r: Remove null test for stack allocated fw_coredump_buffer
Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Bradley Grove [Thu, 29 Aug 2013 19:55:43 +0000 (15:55 -0400)]
[SCSI] esas2r: smatch - Remove test for impossible condition (uint8 > 255)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Bradley Grove [Thu, 29 Aug 2013 19:55:42 +0000 (15:55 -0400)]
[SCSI] esas2r: smatch - Fix overrun due to sprintf appending NULL
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Bradley Grove [Thu, 29 Aug 2013 19:55:40 +0000 (15:55 -0400)]
[SCSI] esas2r: smatch - Fix dereference that occurs prior to check
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Bradley Grove [Thu, 29 Aug 2013 19:55:39 +0000 (15:55 -0400)]
[SCSI] esas2r: smatch - Use biwise rather than logical AND for checking if any bit set
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Vaughan Cao [Thu, 29 Aug 2013 02:00:39 +0000 (10:00 +0800)]
[SCSI] sg: push file descriptor list locking down to per-device locking
Push file descriptor list locking down to per-device locking. Let sg_index_lock
only protect device lookup.
sdp->detached is also set and checked with this lock held.
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Vaughan Cao [Thu, 29 Aug 2013 02:00:38 +0000 (10:00 +0800)]
[SCSI] sg: checking sdp->detached isn't protected when open
@detached is set under the protection of sg_index_lock. Without getting the
lock, new sfp will be added during sg removal and there is no chance for it
to be picked out. So check with sg_index_lock held in sg_add_sfp().
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Vaughan Cao [Thu, 29 Aug 2013 02:00:37 +0000 (10:00 +0800)]
[SCSI] sg: no need sg_open_exclusive_lock
Open exclusive check is protected by o_sem, no need sg_open_exclusive_lock.
@exclude is used to record which type of rwsem we are holding.
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Vaughan Cao [Thu, 29 Aug 2013 02:00:36 +0000 (10:00 +0800)]
[SCSI] sg: use rwsem to solve race during exclusive open
A race condition may happen if two threads are both trying to open the same sg
with O_EXCL simultaneously. It's possible that they both find fsds list is
empty and get_exclude(sdp) returns 0, then they both call set_exclude() and
break out from wait_event_interruptible and resume open.
Now use rwsem to protect this process. Exclusive open gets write lock and
others get read lock. The lock will be held until file descriptor is closed.
This also leads 'exclude' only a status rather than a check mark.
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Akinobu Mita [Mon, 26 Aug 2013 13:08:41 +0000 (22:08 +0900)]
[SCSI] scsi_debug: fix logical block provisioning support when unmap_alignment != 0
Commit b90ebc3d5c41c9164ae04efd2e4f8204c2a186f1 ("[SCSI] scsi_debug:
fix logical block provisioning support") fixed several issues with
logical block provisioning support, but it still doesn't properly fix
the cases when unmap_alignment > 0.
For example, load scsi_debug module with the following module parameters
and make all blocks mapped by filling the storage with zero.
The problem is in map_index_to_lba(), which should return the first
LBA which is corresponding to a given index of provisioning map
(map_storep).
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Akinobu Mita [Mon, 26 Aug 2013 13:08:40 +0000 (22:08 +0900)]
[SCSI] scsi_debug: fix endianness bug in sdebug_build_parts()
With module parameter num_parts > 0, partition table is built on the
ramdisk storage when loading the driver. Unfortunately, there is an
endianness bug in sdebug_build_parts(). So the partition table is not
correctly initialized on big-endian systems.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Sawan Chandak [Tue, 27 Aug 2013 05:37:51 +0000 (01:37 -0400)]
[SCSI] qla2xxx: Add a new interface to update versions.
On any Adapter when we flash through FC/FCoE without card reset option it still
shows the Running FW version in Flashed FW version. This new interface will be
used by API to instruct the driver to update its cache versions.
Chad Dupuis [Tue, 27 Aug 2013 05:37:50 +0000 (01:37 -0400)]
[SCSI] qla2xxx: Move queue depth ramp down message to i/o debug level.
Unless there is a need to observe them, the queue depth ramp up/down messages
are a nuisance and may cause the system to become unresponsive so move it a
non-default logging level.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Earlier IDC-TIME-EXTEND aen was a nop and ignored by driver.
We now have to handle the aen so that other protocol drivers can use time
extension during some loopback operations.
[SCSI] qla2xxx: Print some variables to hexadecimal string via %*phN format
The patch changes a specifier used to output some variables. Instead of using
stack for each byte the '%*ph[CN]' allows to take a one pointer and prints
entire buffer as a hexadecimal string with the separator ':' or ''.
Steffen Maier [Thu, 22 Aug 2013 15:49:34 +0000 (17:49 +0200)]
[SCSI] zfcp: enable FCP hardware data router by default
Enabling the data router support by default
can increase performance in certain situations.
It is safe to do so and tolerated in LPAR and under z/VM
in case there is no data router support in that environment.
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Martin Peschke [Thu, 22 Aug 2013 15:49:33 +0000 (17:49 +0200)]
[SCSI] zfcp: dead code removal
Get rid of unused function zfcp_fsf_get_req and corresponding
prototype definition.
Commit a54ca0f62f953898b05549391ac2a8a4dad6482b in v2.6.28
"[SCSI] zfcp: Redesign of the debug tracing for HBA records."
accidentally introduced this code which was dead in the first place.
Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Sreekanth Reddy [Wed, 14 Aug 2013 12:53:20 +0000 (18:23 +0530)]
[SCSI] mpt3sas: Added a driver module parameter max_msix_vectors
Added a driver module parameter max_msix_vectors. Using this module parameter
the maximum number of MSI-X vectors could be set.
The number of MSI-X vectors used would be the minimum of MSI-X vectors
supported by the HBA, the number of CPU cores and the value set to
max_msix_vectors module parameter.
The default value of this module parameter is set to 8. The default value of
this parameter is set to 8 inorder to reduce the amount of memory required for
Reply Descriptor Post queue. This is because with the higher MSI-X vectors,
some times kernel is not able to allocate the requested amount of memory and
crash is observed. To overcome this problem, the default value is set to 8.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Nilesh Javali [Fri, 16 Aug 2013 11:03:03 +0000 (07:03 -0400)]
[SCSI] qla4xxx: Implementation of ACB configuration during Loopback for ISP8042
While loopback diagnostic is in progress, disable the ACB which resets
all the active connections to target. Disable ACB would filter out all
the DHCP multicast and broadcast packets which otherwise cause the
diagnostic test to take longer time to complete or failures in some
other cases.
[SCSI] mpt2sas: Fix for kernel panic when driver loads with HBA connected to non LUN 0 configured expander
With some enclosures when LUN 0 is not created but LUN 1 or LUN X is created
then SCSI scan procedure calls target_alloc, slave_alloc call back functions
for LUN 0 and slave_destory() for same LUN 0.
In these kind of cases within slave_destroy, pointer to scsi_target in
_sas_device structure is set to NULL, following which when slave_alloc for
LUN 1 is called then starget would not be set properly for this LUN.
So, scsi_target pointer pointing to NULL value would lead to a crash later
in the discovery procedure.
To solve this issue set the sas_device's scsi_target pointer to scsi_device's
scsi_target if it is NULL earlier in slave_alloc callback function.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] mpt2sas: when Async scanning is enabled then while scanning, devices are removed but their transport layer entries are not removed
When Async scanning mode is enabled and device scanning is in progress then
devices should not be removed. But in actuality, devices are removed but
their transport layer entries are not removed. This causes error to add
the same device to the transport layer after host reset or diagnostic
reset.
So, in this patch, modified the code in such a way that device is not removed
when Async scanning mode is enabled and device scanning is in progress.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] mpt2sas: Infinite loop can occur if MPI2_IOCSTATUS_CONFIG_INVALID_PAGE is not returned
Infinite loop can occur if IOCStatus is not equal to
MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value in the while loops in functions
_scsih_search_responding_sas_devices,
_scsih_search_responding_raid_devices and
_scsih_search_responding_expanders
So, Instead of checking for MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value,
in this patch code is modified to check for IOCStatus not equals to
MPI2_IOCSTATUS_SUCCESS to break the while loop.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] mpt2sas: Change in MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED notification methodology
The intent of this patch is to perform a graceful shutdown of target drives even if
volume doesn't exits. Changes done in this patch
1. Removed the check for the presence of volumes before sending down
MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED. Therefore, this RAID action
would be sent if the card is IR Firmware.
2. The MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED is sent even when the
system undergoes suspend (in addition to remove/shutdown which was already
present)
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] mpt2sas: Null pointer deference possibility in mpt2sas_ctl_event_callback function
Added a check to identify if mpi_reply is NULL in mpt2sas_ctl_event_callback()
and return without proceeding if it is the case.
Also modified the following functions to return void instead of 0 or 1
as returning those values from events perspective doesn't make sense.
* _base_async_event()
* mpt2sas_ctl_event_callback()
* mpt2sas_scsih_event_callback()
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
This is caused by
enqueue_cmd_and_start_io()->
set_performant_mode()->
smp_processor_id()
Which if you have debugging enabled calls debug_processor_id() and triggers the warning.
The code here is
c->Header.ReplyQueue = smp_processor_id() % h->nreply_queues;
Since it is not critical that the code complete on the same processor,
but the cpu is a hint used in generating the ReplyQueue and will still work if
the cpu migrates or is preempted, it is safe to use the raw_smp_processor_id()
to surpress the false positve warning.
Signed-off-by: John Kacur <jkacur@redhat.com> Acked-by: Stephen Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Or Gerlitz [Thu, 8 Aug 2013 10:44:29 +0000 (13:44 +0300)]
[SCSI] IB/iser: Add Discovery support
To run discovery over iSER we need to advertize the CAP_TEXT_NEGO capability
towards user space. Also need to make sure the login RX buffer is posted when
SendTargets TEXT PDUs are sent. For that end, we use a setting of the
ISCSI_PARAM_DISCOVERY_SESS iscsi param as an indication that this is
discovery session.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Yijing Wang [Thu, 8 Aug 2013 13:10:21 +0000 (21:10 +0800)]
[SCSI] pm8001: clean up unnecessary MSI/MSI-X capability find
PCI core will initialize device MSI/MSI-X capability in
pci_msi_init_pci_dev(). So device driver should use
pci_dev->msi_cap/msix_cap to determine whether the device
support MSI/MSI-X instead of using
pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX).
Access to PCIe device config space again will consume more time.
Signed-off-by: Yijing Wang <wangyijing@huawei.com> Acked-by: lindar_liu <lindar_liu@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Joe Lawrence [Thu, 8 Aug 2013 20:45:39 +0000 (16:45 -0400)]
[SCSI] mpt3sas: fix cleanup on controller resource mapping failure
If mpt3sas_base_map_resources takes an early error path then its
counterpart, mpt3sas_base_free_resources needs to be careful about
cleaning up:
1 - _base_mask_interrupts and _base_make_ioc_ready require memory
mapped I/O registers, make sure that this is true.
2 - _base_free_irq iterates over the adapter's reply_queue_list, so
move this list head initialization out of _base_enable_msix to
_scsih_probe so this will always be safe.
3 - check that the controller PCI device and its BARs have been
enabled before disabling them.
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Joe Lawrence [Thu, 8 Aug 2013 20:45:38 +0000 (16:45 -0400)]
[SCSI] mpt2sas: fix cleanup on controller resource mapping failure
If mpt2sas_base_map_resources takes an early error path then its
counterpart, mpt2sas_base_free_resources needs to be careful about
cleaning up:
1 - _base_mask_interrupts and _base_make_ioc_ready require memory
mapped I/O registers, make sure that this is true.
2 - _base_free_irq iterates over the adapter's reply_queue_list, so
move this list head initialization out of _base_enable_msix to
_scsih_probe so this will always be safe.
3 - check that the controller PCI device and its BARs have been
enabled before disabling them.
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Ewan D. Milne [Thu, 8 Aug 2013 19:07:48 +0000 (15:07 -0400)]
[SCSI] Generate uevents on certain unit attention codes
Generate a uevent when the following Unit Attention ASC/ASCQ
codes are received:
2A/01 MODE PARAMETERS CHANGED
2A/09 CAPACITY DATA HAS CHANGED
38/07 THIN PROVISIONING SOFT THRESHOLD REACHED
3F/03 INQUIRY DATA HAS CHANGED
3F/0E REPORTED LUNS DATA HAS CHANGED
Log kernel messages when the following Unit Attention ASC/ASCQ
codes are received that are not as specific as those above:
2A/xx PARAMETERS CHANGED
3F/xx TARGET OPERATING CONDITIONS HAVE CHANGED
Added logic to set expecting_lun_change for other LUNs on the target
after REPORTED LUNS DATA HAS CHANGED is received, so that duplicate
uevents are not generated, and clear expecting_lun_change when a
REPORT LUNS command completes, in accordance with the SPC-3
specification regarding reporting of the 3F 0E ASC/ASCQ UA.
[jejb: remove SPC3 test in scsi_report_lun_change and some docbook fixes and
unused variable fix, both reported by Fengguang Wu] Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Tomas Henzl [Thu, 1 Aug 2013 13:14:52 +0000 (15:14 +0200)]
[SCSI] hpsa: remove unneeded variable
Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
projects / mirror_ubuntu-artful-kernel.git / log