Vlad Yasevich [Thu, 1 Jun 2017 15:01:16 +0000 (11:01 -0400)]
ip: Add IFLA_EVENT output to ip monitor
Add IFLA_EVENT output so that event types can be viewed with
'monitor' command. This gives a little more information for why
a given message was received.
Roopa Prabhu [Fri, 2 Jun 2017 04:53:28 +0000 (21:53 -0700)]
ip: extend route get to return matching fib route
Uses newly introduced RTM_GETROUTE flag RTM_F_FIB_MATCH
to return a matching fib route. Introduces 'fibmatch'
keyword to ip route get.
ipv4:
----
$ip route show
default via 192.168.0.2 dev eth0
10.0.14.0/24
nexthop via 172.16.0.3 dev dummy0 weight 1
nexthop via 172.16.1.3 dev dummy1 weight 1
$ip route get 10.0.14.2
10.0.14.2 via 172.16.1.3 dev dummy1 src 172.16.1.1
cache
$ip route get fibmatch 10.0.14.2
10.0.14.0/24
nexthop via 172.16.0.3 dev dummy0 weight 1
nexthop via 172.16.1.3 dev dummy1 weight 1
ipv6:
----
$ip -6 route show
2001:db9:100::/120 metric 1024
nexthop via 2001:db8:2::2 dev dummy0 weight 1
nexthop via 2001:db8:12::2 dev dummy1 weight 1
$ip -6 route get 2001:db9:100::1
2001:db9:100::1 from :: via 2001:db8:12::2 dev dummy1 \
src 2001:db8:12::1 metric 1024 pref medium
$ip -6 route get fibmatch 2001:db9:100::1
2001:db9:100::/120 metric 1024
nexthop via 2001:db8:12::2 dev dummy1 weight 1
nexthop via 2001:db8:2::2 dev dummy0 weight 1
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: David Ahern <dsahern@gmail.com>
Eli Cohen [Sun, 4 Jun 2017 12:36:48 +0000 (15:36 +0300)]
iplink: Update usage in help message
Add to usage message a description of how to configure Infiniband node
and port GUIDs. Also modify the man page to emphasize the GUIDs are
configured for Infiniband VFs.
Fixes: d91fb3f4c7e4 ("Add support for configuring Infiniband GUIDs") Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Oliver Hartkopp [Fri, 2 Jun 2017 17:04:47 +0000 (19:04 +0200)]
ip: link add vxcan support
Since commit a8f820a380a2a06 ('can: add Virtual CAN Tunnel driver (vxcan)')
for Linux 4.12 a virtual CAN tunnel driver analogue to veth is available in
Linux.
This patch adds the ability to create vxcan device pairs.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
David Ahern [Sat, 27 May 2017 23:34:47 +0000 (17:34 -0600)]
ip address: Export ip_linkaddr_list
ipaddr_list_flush_or_save generates a list of nlmsg's for links and
optionally for addresses. Move the code into ip_linkaddr_list and
export it along with the supporting infrastructure.
API to use this function is:
struct nlmsg_chain linfo = { NULL, NULL};
struct nlmsg_chain ainfo = { NULL, NULL};
This patch adds handling for new CAN netlink interface introduced in
4.11 kernel:
- IFLA_CAN_TERMINATION,
- IFLA_CAN_TERMINATION_CONST,
- IFLA_CAN_BITRATE_CONST,
- IFLA_CAN_DATA_BITRATE_CONST
Output example:
$ip -d link show can0
6: can0: <NOARP,ECHO> mtu 16 qdisc noop state DOWN mode DEFAULT group default qlen 10
link/can promiscuity 0
can state STOPPED (berr-counter tx 0 rx 0) restart-ms 0
bitrate 80000
[ 20000, 33333, 50000, 80000, 83333, 100000,
125000, 150000, 175000, 200000, 225000, 250000,
275000, 300000, 500000, 625000, 800000, 1000000 ]
termination 0 [ 0, 120 ]
clock 0numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
Phil Sutter [Tue, 23 May 2017 13:40:57 +0000 (15:40 +0200)]
tc: m_xt: Prevent a segfault in libipt
This happens with NAT targets, such as SNAT, DNAT and MASQUERADE. These
are still not usable with this patch, but at least tc doesn't crash
anymore when one tries to use them.
Roi Dayan [Sun, 21 May 2017 05:37:27 +0000 (08:37 +0300)]
devlink: Add option to set and show eswitch encapsulation support
This is an e-switch global knob to enable HW support for applying
encapsulation/decapsulation to VF traffic as part of SRIOV e-switch offloading.
The actual encap/decap is carried out (along with the matching and other
actions) per offloaded e-switch rules, e.g as done when offloading the TC tunnel
key action.
Possible values are enable/disable.
Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com>
David Ahern [Tue, 16 May 2017 21:22:46 +0000 (14:22 -0700)]
netlink: Change rtnl_dump_done to always show error
The original code which became rtnl_dump_done only shows netlink errors
if the protocol is NETLINK_SOCK_DIAG, but netlink dumps always appends
the length which contains any error encountered during the dump. Update
rtnl_dump_done to always show the error if there is one.
As an *example* without this patch, dumping a route object that exceeds
the internal buffer size terminates with no message to the user -- the
dump just ends because the NLMSG_DONE attribute was received. With this
patch the user at least gets a message that the dump was aborted.
$ ip ro ls
default via 10.0.2.2 dev eth0
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
10.10.0.0/16 dev veth1 proto kernel scope link src 10.10.0.1
172.16.1.0/24 dev br0.11 proto kernel scope link src 172.16.1.1
Error: Buffer too small for object
Dump terminated
The point of this patch is to notify the user of a failure versus
silently exiting on a partial dump. Because the NLMSG_DONE attribute
was received, the entire dump needs to be restarted to use a larger
buffer for EMSGSIZE errors. That could be done automatically but it
has other user impacts (e.g., duplicate output if the dump is
restarted) and should be the subject of a different patch.
Baruch Siach [Mon, 22 May 2017 13:27:53 +0000 (16:27 +0300)]
ip: include libc headers first
Including libc headers first helps as a workaround to redefinition of struct
ethhdr with a suitably patched musl libc that suppresses the kernel
if_ether.h.
Jiri Pirko [Tue, 16 May 2017 17:29:36 +0000 (19:29 +0200)]
tc: actions: add helpers to parse and print control actions
Each tc action is terminated by a control action. Each action parses and
prints then intividually. Introduce set of helpers and allow to share
this code.
Khem Raj [Sat, 20 May 2017 21:28:46 +0000 (14:28 -0700)]
tc: include stdint.h explicitly for UINT16_MAX
Fixes
| tc_core.c:190:29: error: 'UINT16_MAX' undeclared (first use in this function); did you mean '__INT16_MAX__'?
| if ((sz >> s->size_log) > UINT16_MAX) {
| ^~~~~~~~~~
David Ahern [Sun, 14 May 2017 01:27:02 +0000 (19:27 -0600)]
ip: add support for more MPLS labels
Kernel now supports up to 30 labels but not defined as part of the uapi.
iproute2 handles up to 8 labels but in a non-consistent way. Update ip
to handle more labels, but in a more programmatic way.
For the MPLS address family, the data field in inet_prefix is used for
labels. Increase that field to 64 u32's -- 64 as nothing more than a
convenient power of 2 number.
Update mpls_pton to take the length of the address field, convert that
length to number of labels and add better error handling to the parsing
of the user supplied string.
Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com>
vxlan: Add support for modifying vxlan device attributes
Ability to change vxlan device attributes was added to kernel through
commit 8bcdc4f3a20b ("vxlan: add changelink support"), however one
cannot do the same through ip(8) command. Changing the allowed vxlan
device attributes using 'ip link set dev <vxlan_name> type vxlan
<allowed_attributes>' currently fails with 'operation not supported'
error. This failure is due to the incorrect rtnetlink message
construction for the 'ip link set' operation.
The vxlan_parse_opt() callback function is called for parsing options
for both 'ip link add' and 'ip link set'. For the 'add' case, we pass
down default values for those attributes that were not provided as CLI
options. However, for the 'set' case we should be only passing down the
explicitly provided attributes and not any other (default) attributes.
David Ahern [Tue, 9 May 2017 06:04:13 +0000 (23:04 -0700)]
ip: mpls: fix printing of mpls labels
If the kernel returns more labels than iproute2 expects, none of
the labels are printed and (null) is shown instead:
$ ip -f mpls ro ls
101 as to (null) via inet 172.16.2.2 dev virt12
201 as to 202/203 via inet6 2001:db8:2::2 dev virt12
Remove the use of MPLS_MAX_LABELS and rely on buffer length that is
passed to mpls_ntop. With this change ip can print the label stack
returned by the kernel up to 255 characters (limit is due to size of
buf passed in) which amounts to 31 labels with a separator.
With this change the above is:
$ ip/ip -f mpls ro ls
101 as to 102/103/104/105/106/107/108/109/110 via inet 172.16.2.2 dev virt12
Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com>
tc: bpf: add ppc64 and sparc64 to list of archs with eBPF support
sparc64 support was added in 7a12b5031c6b (sparc64: Add eBPF JIT., 2017-04-17)[0]
and ppc64 in 156d0e290e96 (powerpc/ebpf/jit: Implement JIT compiler for extended BPF, 2016-06-22)[1].
[0]: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/commit/?id=7a12b5031c6b
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/commit/?id=156d0e290e96 Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Or Gerlitz [Thu, 4 May 2017 13:15:15 +0000 (16:15 +0300)]
tc: Reflect HW offload status
Currently there is no way of querying whether a filter is
offloaded to HW or not when using "both" policy (where none
of skip_sw or skip_hw flags are set by user-space).
Add two new flags, "in hw" and "not in hw" such that user
space can determine if a filter is actually offloaded to
hw or not. The "in hw" UAPI semantics was chosen so it's
similar to the "skip hw" flag logic.
If none of these two flags are set, this signals running
over older kernel.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Simon Horman <simon.horman@netronome.com>
Add support for pipeline debug (dpipe). The headers are used both the
gain visibillity into the headers supported by the hardware, and to
build the headers/field database which is used by other commands.
Examples:
First we can see the headers supported by the hardware:
$devlink dpipe header show pci/0000:03:00.0
pci/0000:03:00.0:
name mlxsw_meta
field:
name erif_port bitwidth 32 mapping_type ifindex
name l3_forward bitwidth 1
name l3_drop bitwidth 1
Note that mapping_type is presented only if relevant. Also the header/
field id's are reported by the kernel they are not shown by default.
They can be observed by using the -v option. Also the headers scope
(global/local) is specified.
$devlink -v dpipe header show pci/0000:03:00.0
pci/0000:03:00.0:
name mlxsw_meta id 0 global false
field:
name erif_port id 0 bitwidth 32 mapping_type ifindex
name l3_forward id 1 bitwidth 1
name l3_drop id 2 bitwidth 1
Second we can examine the tables supported by the hardware. In order
to dump all the tables no table name should be provided:
$devlink dpipe table show pci/0000:03:00.0
In order to examine specific table its name have to be specified:
$devlink dpipe table show pci/0000:03:00.0 name erif
pci/0000:03:00.0:
name mlxsw_erif size 800 counters_enabled true
match:
type field_exact header mlxsw_meta field erif_port mapping ifindex
action:
type field_modify header mlxsw_meta field l3_forward
type field_modify header mlxsw_meta field l3_drop
To enable/disable counters on the table:
$devlink dpipe table set pci/0000:03:00.0 name erif counters enable
$devlink dpipe table set pci/0000:03:00.0 name erif counters disable
In order to see the current entries in the hardware for specific table:
$devlink dpipe table dump pci/0000:03:00.0 name erif
pci/0000:03:00.0:
index 0 counter 0
match_value:
type field_exact header mlxsw_meta field erif_port mapping ifindex mapping_value 383 value 0
action_value:
type field_modify header mlxsw_meta field l3_forward value 1
index 1 counter 0
match_value:
type field_exact header mlxsw_meta field erif_port mapping ifindex mapping_value 381 value 1
action_value:
type field_modify header mlxsw_meta field l3_forward value 1
In the above example the table contains two entries which does match
on erif port and forwards the packet or drop it (currently only the
forward count is implemented). The counter values are provided for
example. In case the counting is not enabled on the table the counters
will not be available.
Boris Pismenny [Sun, 30 Apr 2017 14:16:02 +0000 (17:16 +0300)]
ip xfrm: Add xfrm state crypto offload
syntax:
ip xfrm state .... offload dev <if-name> dir <in or out>
Example to add inbound offload:
ip xfrm state .... offload dev mlx0 dir in
Example to add outbound offload:
ip xfrm state .... offload dev mlx0 dir out
Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Daniel Borkmann [Fri, 28 Apr 2017 13:44:29 +0000 (15:44 +0200)]
bpf: add support for generic xdp
Follow-up to commit c7272ca72009 ("bpf: add initial support for
attaching xdp progs") to also support generic XDP. This adds an
indicator for loaded generic XDP programs when programs are loaded
as shown in c7272ca72009, but the driver still lacks native XDP
support.
# ip link
[...]
3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdpgeneric qdisc [...]
link/ether 0c:c4:7a:03:f9:25 brd ff:ff:ff:ff:ff:ff
[...]
In case the driver does support native XDP, but the user wants
to load the program as generic XDP (e.g. for testing purposes),
then this can be done with the same semantics as in c7272ca72009,
but with 'xdpgeneric' instead of 'xdp' command for loading:
# ip -force link set dev eno1 xdpgeneric obj xdp.o
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Sun, 23 Apr 2017 12:53:56 +0000 (15:53 +0300)]
tc/pedit: p_udp: introduce pedit udp support
For example, forward udp traffic destined to port 999 to veth0 and set
tcp port to 888:
$ tc filter add dev enp0s9 protocol ip parent ffff: \
flower \
ip_proto udp \
dst_port 999 \
action pedit ex munge \
udp dport set 888 \
action mirred egress \
redirect dev veth0
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Amir Vadai <amir@vadai.me>
Amir Vadai [Sun, 23 Apr 2017 12:53:55 +0000 (15:53 +0300)]
tc/pedit: p_tcp: introduce pedit tcp support
For example, forward tcp traffic destined to port 80 to veth0 and set
tcp port to 8080:
$ tc filter add dev enp0s9 protocol ip parent ffff: \
flower \
ip_proto tcp \
dst_port 80 \
action pedit ex munge \
tcp dport set 8080 \
action mirred egress \
redirect dev veth0
Amir Vadai [Sun, 23 Apr 2017 12:53:54 +0000 (15:53 +0300)]
tc/pedit: p_eth: ETH header editor
For example, forward tcp traffic to veth0 and set
destination mac address to 11:22:33:44:55:66 :
$ tc filter add dev enp0s9 protocol ip parent ffff: \
flower \
ip_proto tcp \
action pedit ex munge \
eth dst set 11:22:33:44:55:66 \
action mirred egress \
redirect dev veth0
Amir Vadai [Sun, 23 Apr 2017 12:53:52 +0000 (15:53 +0300)]
tc/pedit: p_ip: introduce editing ttl header
Enable user to edit IP header ttl field.
For example, to forward any TCP packet and decrease its TTL by one:
$ tc filter add dev enp0s9 protocol ip parent ffff: \
flower \
ip_proto tcp \
action pedit ex munge \
ip ttl add 0xff pipe \
action mirred egress \
redirect dev veth0
Amir Vadai [Sun, 23 Apr 2017 12:53:50 +0000 (15:53 +0300)]
tc/pedit: Extend pedit to specify offset relative to mac/transport headers
Utilize the extended pedit netlink to set an offset relative to a
specific header type. Old netlink only enabled the user to set
approximated offset relative to the IPv4 header.
To use this extended functionality need to use the 'ex' keyword after
'pedit' and before any 'munge'.
e.g:
$ tc filter add dev ens9 protocol ip parent ffff: \
flower \
ip_proto udp \
dst_port 80 \
action pedit ex munge \
ip dst set 1.1.1.1 \
pipe \
action mirred egress redirect dev veth0
Michal Kubeček [Thu, 27 Apr 2017 09:43:47 +0000 (11:43 +0200)]
routel: fix infinite loop in line parser
As noticed by one of the few users of routel script, it ends up in an
infinite loop when they pull out the cable from the NIC used for some
route. This is caused by its parser expecting the line of "ip route show"
output consists of "key value" pairs (except for the initial target range),
together with an old trap of Bourne style shells that "shift 2" does
nothing if there is only one argument left. Some keywords, e.g. "linkdown",
are not followed by a value.
Improve the parser to
(1) only set variables for keywords we care about
(2) recognize (currently) known keywords without value
This is still far from perfect (and certainly not future proof) but to
fully fix the script, one would probably have to rewrite the logic
completely (and I'm not sure it's worth the effort).
Introduce optional 128-bit action cookie.
Like all other cookie schemes in the networking world (eg in protocols
like http or existing kernel fib protocol field, etc) the idea is to
save user state that when retrieved serves as a correlator. The kernel
_should not_ intepret it. The user can store whatever they wish in the
128 bits.
Sample exercise(showing variable length use of cookie)
.. create an accept action with cookie a1b2c3d4
sudo $TC actions add action ok index 1 cookie a1b2c3d4
.. dump all gact actions..
sudo $TC -s actions ls action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 1 bind 0 installed 5 sec used 5 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie a1b2c3d4
.. bind the accept action to a filter..
sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 1
... send some traffic..
$ ping 127.0.0.1 -c 3
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.020 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.027 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.038 ms
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
David Ahern [Fri, 14 Apr 2017 23:09:56 +0000 (16:09 -0700)]
ip vrf: Add command name next to pid
'ip vrf pids' is used to list processes bound to a vrf, but it only
shows the pid leaving a lot of work for the user. Add the command
name to the output. With this patch you get the more user friendly:
David Ahern [Fri, 14 Apr 2017 23:09:56 +0000 (16:09 -0700)]
ip vrf: Add command name next to pid
'ip vrf pids' is used to list processes bound to a vrf, but it only
shows the pid leaving a lot of work for the user. Add the command
name to the output. With this patch you get the more user friendly:
David Ahern [Fri, 24 Mar 2017 02:51:22 +0000 (19:51 -0700)]
ip netconf: show all families on dev request
Currently specifying a device to ip netconf and it dumps only values
for IPv4. Change this to dump data for all families unless a specific
family is given.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
David Ahern [Fri, 24 Mar 2017 02:51:21 +0000 (19:51 -0700)]
ip netconf: Show all address families by default in dumps
Currently, 'ip netconf' only shows ipv4 and ipv6 netconf settings. If IPv6
is not enabled, the dump ends with
RTNETLINK answers: Operation not supported
when IPv6 request is attempted. Further, if the mpls_router module is also
loaded a separate request is needed to get MPLS settings.
To make this better going forward, use the new PF_UNSPEC dump all option
if the kernel supports it. If the kernel does not, it sets NLMSG_ERROR and
returns EOPNOTSUPP which is trapped and we fall back to the existing output
to maintain compatibility with existing kernels.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
David Ahern [Fri, 24 Mar 2017 02:51:20 +0000 (19:51 -0700)]
netlink: Add flag to suppress print of nlmsg error
Allow callers of the dump API to handle nlmsg errors (e.g., an
unsupported feature). Setting RTNL_HANDLE_F_SUPPRESS_NLERR in the
rtnl_handle avoids unnecessary messages to the users in some case.
For example,
RTNETLINK answers: Operation not supported
when probing for support of a new feature.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
The maketable program used to generate one of the configuration
files at build time for netem would access past the end of the array
for one input value. This is a bug inherited from original NISTnet.
Just fold the value, like other code there.
This is not a runtime error security problem.
It only impacts the build process if the build machine
had extra hardening enabled.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Robert Shearman [Tue, 11 Apr 2017 08:37:20 +0000 (09:37 +0100)]
iproute: Add support for ttl-propagation attribute
Add support for setting and displaying the ttl-propagation attribute
initially used by MPLS to control propagation of MPLS TTL to IPv4/IPv6
TTL/hop-limit on popping final label on a per-route basis.
Signed-off-by: Robert Shearman <rshearma@brocade.com> Acked-by: David Ahern <dsa@cumulusnetworks.com>
Phil Sutter [Tue, 28 Mar 2017 21:19:39 +0000 (23:19 +0200)]
ip: link: Add missing link type help texts
These are basically stubs: The types which lacked their own help text
simply don't accept any options (yet). Still it might be a bit confusing
to users if they are presented with the generic 'ip link' help text
instead of something saying there are no type specific options.
Phil Sutter [Tue, 28 Mar 2017 21:19:38 +0000 (23:19 +0200)]
ip: link: Unify link type help functions a bit
Take help function in iplink_bridge.c as an example and make other link
types' help functions similar:
* Use a single fprintf() call (if possible).
* Don't state a full command line, just "... type OPTIONS".
* Put every option in it's own line, align options by column.
* List mandatory options first.
link_veth.c is intentionally left untouched because it's 'peer' option
eats all kinds of generic link options and the help text points this out
without duplicating all the options there again.
projects / mirror_iproute2.git / log