dt-bindings: trivial-devices: Add mcp342x ADCs and drop separate binding doc.
These i2c devices have simple bindings, well described by trivial-device.yaml
so rather than convert the binding doc to yaml, let us just add them to
trivial devices and drop the old binding document.
Stefan Popa [Mon, 10 Aug 2020 09:32:56 +0000 (12:32 +0300)]
iio: accel: adxl372: Add support for FIFO peak mode
By default, if all three channels (x, y, z) are enabled, sample sets of
concurrent 3-axis data is stored in the FIFO. This patch adds the option
to configure the FIFO to store peak acceleration (x, y and z) of every
over-threshold event. When pushing to iio buffer we push only enabled
axis data.
Currently the driver configures adxl372 to work in loop mode.
The inactivity and activity timings decide how fast the chip
will loop through the awake and waiting states and the
thresholds on x,y,z axis decide when activity or inactivity
will be detected.
This patch adds standard events sysfs entries for the inactivity
and activity timings: thresh_falling_period/thresh_rising_period
and for the in_accel_x_thresh_falling/rising_value.
Crt Mori [Tue, 18 Aug 2020 21:37:37 +0000 (23:37 +0200)]
iio:temperature:mlx90632: Some stylefixing leftovers
There is some inconsistency and whitespace cleanup performed in this
patch. It was done on top of my other patches, but I can rebase to head
of the togreg branch if it would go in sooner.
For some time the market wants medical grade accuracy in medical range,
while still retaining the declared accuracy outside of the medical range
within the same sensor. That is why we created extended calibration
which is automatically switched to when object temperature is too high.
This patch also introduces the object_ambient_temperature variable which
is needed for more accurate calculation of the object infra-red
footprint as sensor's ambient temperature might be totally different
than what the ambient temperature is at object and that is why we can
have some more errors which can be eliminated. Currently this temperature
is fixed at 25, but the interface to adjust it by user (with external
sensor or just IR measurement of the other object which acts as ambient),
will be introduced in another commit.
Crt Mori [Tue, 18 Aug 2020 21:37:33 +0000 (23:37 +0200)]
iio:temperature:mlx90632: Reduce number of equal calulcations
TAdut4 was calculated each iteration although it did not change. In light
of near future additions of the Extended range DSP calculations, this
function refactoring will help reduce unrelated changes in that series as
well as reduce the number of new functions needed.
iio: multiplexer: iio-mux: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20200829064726.26268-18-krzk@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20200829064726.26268-12-krzk@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: chemical: scd30: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Link: https://lore.kernel.org/r/20200829064726.26268-11-krzk@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: afe: iio-rescale: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20200829064726.26268-9-krzk@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: adc: meson_saradc: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20200829064726.26268-6-krzk@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: adc: envelope-detector: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20200829064726.26268-3-krzk@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: devicetree@vger.kernel.org Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tian Tao [Thu, 20 Aug 2020 03:01:26 +0000 (11:01 +0800)]
iio: adc: adi-axi-adc: Use kobj_to_dev() instead of container_of()
Use kobj_to_dev() instead of container_of()
Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver for the as73211 light sensor provides the following not yet
documented sysfs entries:
- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale
- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)
- in_intensity_integration_time
Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio:adc:axp20x: Convert from OF to generic fw / device properties
Whilst fairly unlikely anyone will ever use this driver with anything
other than DT, we are trying to move IIO over to the generic interfaces
where easy to do so.
In this case this involved moving to generic check on presence
of fwnode, generic device_get_match_data() and dropping the of_match_ptr
protection. Also relevant header changes to have property.h and
mod_devicetable.h only.
Also drop the casting away of a const in favour of retaining
the const throughout.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Jonathan Cameron [Tue, 21 Jul 2020 17:14:41 +0000 (18:14 +0100)]
iio:adc:ti-adc081c: Drop ACPI ids that seem very unlikely to be official.
We have no known users of these in the wild.
it seems very unlikely these are real IDs having the form ADCXXXX
as that ID is owned by Achnor Datacomm not TI.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Jonathan Cameron [Tue, 21 Jul 2020 17:14:42 +0000 (18:14 +0100)]
iio:adc:ti-adc108s102: Drop CONFIG_OF and of_match_ptr protections
I'm trying to clean this (now) anti-pattern out of IIO to avoid
cut and paste into new drivers.
Also add an include of mod_devicetable.h as the driver directly uses
struct of_device_id which is defined in there.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jan Kiszka <jan.kiszka@siemens.com>
Jonathan Cameron [Tue, 21 Jul 2020 17:14:43 +0000 (18:14 +0100)]
iio:adc:ti-adc128s052: drop of_match_ptr protection
There is no real advantage in having these protections and
for parts that do not have an explicit ACPI ID, it prevents the
use of PRP0001. I'm trying to clear this out of IIO in general
to avoid copying in new drivers.
Include mod_devicetable.h as we are using of_device_id in here so
including that header is best practice.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Jonathan Cameron [Tue, 21 Jul 2020 17:14:44 +0000 (18:14 +0100)]
iio:adc:bcm_iproc: Drop of_match_ptr protection and switch to mod_devicetable.h
This driver cannot be instantiated from ACPI due to it's use of
syscon_regmap_lookup_by_phandle() but in the interests of clearing
this anti pattern out of IIO, let us switch to an explicit
check in Kconfig and remove the protections on the of_match_table
The switch of header is because we only use of_device_id
in here and that is defined in mod_devicetable.h not of.h.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
iio: dac: dac5571: Support powerdown for multi-channel
The driver currently only allows channel 0 to be powered down but the
multi-channel variants of the hardware allow each channel to be powered
down separately and with separate power down modes. Add support for
this.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add driver support for HDC2010/2080 series devices and sysfs
documentation for their heater element.
HDC2010 is an integrated high-accuracy humidity and temperature sensor
with very low power consumption. The device includes a resistive heating
element. The temperature range is -40C to 125C with 0.2C
accuracy. Humidity measurement is 0 to 100% with 2% RH accuracy.
Signed-off-by: Eugene Zaikonnikov <ez@norphonic.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stephen Boyd [Mon, 3 Aug 2020 23:58:15 +0000 (17:58 -0600)]
iio: sx9310: Use irq trigger flags from firmware
We shouldn't need to set default irq trigger flags here as the firmware
should have properly indicated the trigger type, i.e. level low, in the
DT or ACPI tables.
Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stephen Boyd [Mon, 3 Aug 2020 23:58:14 +0000 (17:58 -0600)]
iio: sx9310: Enable vdd and svdd regulators at probe
Enable the main power supply (vdd) and digital IO power supply (svdd)
during probe so that the i2c communication and device works properly on
boards that aggressively power gate these supplies.
Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stephen Boyd [Mon, 3 Aug 2020 23:58:13 +0000 (17:58 -0600)]
iio: sx9310: Drop channel_users[]
This struct member isn't used. Drop it.
Fixes: 72ad02b15d63 ("iio: Add SEMTECH SX9310/9311 sensor driver") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Daniel Campello <campello@chromium.org> Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Campello [Mon, 3 Aug 2020 23:58:12 +0000 (17:58 -0600)]
iio: sx9310: Miscellaneous format fixes
Miscellaneous format fixes throughout the whole file.
Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Campello [Mon, 3 Aug 2020 23:58:11 +0000 (17:58 -0600)]
iio: sx9310: Use variable to hold &client->dev
Improves readability by storing &client->dev in a local variable.
Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Campello [Mon, 3 Aug 2020 23:58:10 +0000 (17:58 -0600)]
iio: sx9310: Simplify error return handling
Checks for non-zero return values to signal error conditions.
Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Campello [Mon, 3 Aug 2020 23:58:08 +0000 (17:58 -0600)]
iio: sx9310: Use regmap_read_poll_timeout() for compensation
Simplify compensation stage by using regmap_read_poll_timeout().
Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Campello [Mon, 3 Aug 2020 23:58:07 +0000 (17:58 -0600)]
iio: sx9310: Use long instead of int for channel bitmaps
Uses for_each_set_bit() macro to loop over channel bitmaps.
Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Campello [Mon, 3 Aug 2020 23:58:06 +0000 (17:58 -0600)]
iio: sx9310: Fixes various memory handling
Makes use __aligned(8) to ensure that the timestamp is correctly aligned
when we call io_push_to_buffers_with_timestamp().
Also makes use of sizeof() for regmap_bulk_read instead of static value.
Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Campello [Mon, 3 Aug 2020 23:58:05 +0000 (17:58 -0600)]
iio: sx9310: Change from .probe to .probe_new
Uses .probe_new in place of .probe. Also uses device_get_match_data()
for whoami matching.
Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Campello [Mon, 3 Aug 2020 23:58:04 +0000 (17:58 -0600)]
iio: sx9310: Remove acpi and of table macros
Avoids unused warnings due to acpi/of table macros.
Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Campello [Mon, 3 Aug 2020 23:58:03 +0000 (17:58 -0600)]
iio: sx9310: Fix irq handling
Fixes enable/disable irq handling at various points. The driver needs to
only enable/disable irqs if there is an actual irq handler installed.
Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Campello [Mon, 3 Aug 2020 23:58:02 +0000 (17:58 -0600)]
iio: sx9310: Update macros declarations
Follows spec sheet for macro declarations.
Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Campello [Mon, 3 Aug 2020 23:58:01 +0000 (17:58 -0600)]
dt-bindings: iio: Add bindings for sx9310 sensor
Adds device tree bindings for sx9310 sensor.
Signed-off-by: Daniel Campello <campello@chromium.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Rob Herring <robh+dt@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
[swboyd@chromium.org: Add both regulators and make them optional] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simple device with a simple conversion. Special handling needed
for the max1118 which is the only supported part that has an external
reference voltage.
Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org>
Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.
This driver has no built-in trigger. In order for making triggered
measurements, an external (software) trigger driver like
iio-trig-hrtimer or iio-trig-sysfs is required.
The sensor supports single and continuous measurement modes. The latter
is not used by design as this would require tight timing synchronization
between hardware and driver without much benefit.
Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add DT bindings for AMS AS73211 XYZ True Color Sensor.
Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ADXRS290 is a high performance MEMS pitch and roll (dual-axis in-plane)
angular rate sensor (gyroscope) designed for use in stabilization
applications. It also features an internal temperature sensor and
programmable high-pass and low-pass filters.
Add support for ADXRS290 in direct-access mode for now.
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXRS290.pdf Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: devicetree@vger.kernel.org Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The change is mostly cosmetic. When looking into the menuconfig help of the
ad8366 driver, the HMC1119 chip should also show up (since the driver
supports it).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stefan Popa [Wed, 22 Jul 2020 07:30:03 +0000 (10:30 +0300)]
iio: adxl372_i2c: Add OF device ID table
The driver does not have a struct of_device_id table, but supported
devices are registered via Device Trees. This patch adds OF device ID
table.
Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: frequency: ad9523: convert rest of driver to device managed functions
The driver pretty much uses device managed functions. The only left-over is
the iio_device_register() function, which also requires an action-or-reset
hook to disable the regulator on the remove and error path.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As HISI_IRQ_KEY_DOWN and HISI_IRQ_KEY_UP are fixed values
and don't depend on irqnum/irqarray.
The IRQ addr and mask addr seem to be also fixed, based on some
comments at the OF parsing code. So, get rid of them too,
removing the of parsing function completely.
staging: regulator: hi6421v600-regulator: add a driver-specific debug macro
Using dev_dbg() is not too nice, as, instead of printing the
name of the regulator, it prints "regulator.<number>", making
harder to associate what is happening with each ldo line.
So, add a debug-specific macro, which will print the rdev's
name, just like the regulator core.