BugLink: http://bugs.launchpad.net/bugs/1765564
fsnotify() acquires a reference to a fsnotify_mark_connector through
the SRCU-protected pointer to_tell->i_fsnotify_marks. However, it
appears that no precautions are taken in fsnotify_put_mark() to
ensure that fsnotify() drops its reference to this
fsnotify_mark_connector before assigning a value to its 'destroy_next'
field. This can result in fsnotify_put_mark() assigning a value
to a connector's 'destroy_next' field right before fsnotify() tries to
traverse the linked list referenced by the connector's 'list' field.
Since these two fields are members of the same union, this behavior
results in a kernel panic.
This issue is resolved by moving the connector's 'destroy_next' field
into the object pointer union. This should work since the object pointer
access is protected by both a spinlock and the value of the 'flags'
field, and the 'flags' field is cleared while holding the spinlock in
fsnotify_put_mark() before 'destroy_next' is updated. It shouldn't be
possible for another thread to accidentally read from the object pointer
after the 'destroy_next' field is updated.
The offending behavior here is extremely unlikely; since
fsnotify_put_mark() removes references to a connector (specifically,
it ensures that the connector is unreachable from the inode it was
formerly attached to) before updating its 'destroy_next' field, a
sizeable chunk of code in fsnotify_put_mark() has to execute in the
short window between when fsnotify() acquires the connector reference
and saves the value of its 'list' field. On the HEAD kernel, I've only
been able to reproduce this by inserting a udelay(1) in fsnotify().
However, I've been able to reproduce this issue without inserting a
udelay(1) anywhere on older unmodified release kernels, so I believe
it's worth fixing at HEAD.
References: https://bugzilla.kernel.org/show_bug.cgi?id=199437 Fixes: 08991e83b7286635167bab40927665a90fb00d81 CC: stable@vger.kernel.org Signed-off-by: Robert Kolchmeyer <rkolchmeyer@google.com> Signed-off-by: Jan Kara <jack@suse.cz>
(cherry picked from commit d90a10e2444ba5a351fa695917258ff4c5709fa5) Signed-off-by: Seyeong Kim <seyeong.kim@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Jason Andryuk [Fri, 18 May 2018 14:59:00 +0000 (16:59 +0200)]
xen-netfront: Fix hang on device removal
BugLink: http://bugs.launchpad.net/bugs/1771620
A toolstack may delete the vif frontend and backend xenstore entries
while xen-netfront is in the removal code path. In that case, the
checks for xenbus_read_driver_state would return XenbusStateUnknown, and
xennet_remove would hang indefinitely. This hang prevents system
shutdown.
xennet_remove must be able to handle XenbusStateUnknown, and
netback_changed must also wake up the wake_queue for that state as well.
Fixes: 5b5971df3bc2 ("xen-netfront: remove warning when unloading module") Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Cc: Eduardo Otubo <otubo@redhat.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
(cherry picked from commit c2d2e6738a209f0f9dffa2dc8e7292fc45360d61) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Colin King <colin.king@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
dann frazier [Sat, 21 Apr 2018 16:50:00 +0000 (18:50 +0200)]
net: hns: Avoid action name truncation
BugLink: https://bugs.launchpad.net/bugs/1765977
When longer interface names are used, the action names exposed in
/proc/interrupts and /proc/irq/* maybe truncated. For example, when
using the predictable name algorithm in systemd on a HiSilicon D05,
I see:
Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit f4ea89110df237da6fbcaab76af431e85f07d904) Signed-off-by: dann frazier <dann.frazier@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
[smb: applied with fuzz 2] Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Anju T Sudhakar [Fri, 18 May 2018 14:48:00 +0000 (16:48 +0200)]
UBUNTU: SAUCE: powerpc/perf: Fix memory allocation for core-imc based on num_possible_cpus()
BugLink: http://bugs.launchpad.net/bugs/1770849
Currently memory is allocated for core-imc based on cpu_present_mask, which
has bit 'cpu' set iff cpu is populated. We use (cpu number / threads per core)
as as array index to access the memory. So in a system with guarded cores,
since allocation happens based on cpu_present_mask, (cpu number / threads per core)
bounds the index and leads to memory overflow.
The issue is exposed in a guard test. The guard test will make some CPU's
as un-available to the system during boot time as well as at runtime. So
when the cpu is unavailable to the system during boot time, the memory
allocation happens depending on the number of available cpus. And when we
access the memory using (cpu number / threads per core) as the index the
system crashes due to memory overflow.
Allocating memory for core-imc based on cpu_possible_mask, which has bit
'cpu' set iff cpu is populatable, will fix this issue.
Reported-by: Pridhiviraj Paidipeddi <ppaidipe at linux.vnet.ibm.com> Signed-off-by: Anju T Sudhakar <anju at linux.vnet.ibm.com> Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Colin King <colin.king@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Andy Whitcroft [Fri, 11 May 2018 23:20:00 +0000 (01:20 +0200)]
UBUNTU: [Config] update Build-Depends: transfig to fig2dev
Some time back transfig became a transitional package to fig2dev.
In cosmic this transitional has now been deprecated. As we are still
copying kernels forward we need to fix this dependency in bionic.
This transition actually occured back in artful, we just missed it.
Switch our build dependency to the "new" fig2dev package.
BugLink: http://bugs.launchpad.net/bugs/1770770 Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Shilpasri G Bhat [Fri, 18 May 2018 14:23:00 +0000 (16:23 +0200)]
cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt
BugLink: http://bugs.launchpad.net/bugs/1768898
gpstate_timer_handler() uses synchronous smp_call to set the pstate
on the requested core. This causes the below hard lockup:
One way to avoid this is removing the smp-call. We can ensure that the
timer always runs on one of the policy-cpus. If the timer gets
migrated to a cpu outside the policy then re-queue it back on the
policy->cpus. This way we can get rid of the smp-call which was being
used to set the pstate on the policy->cpus.
Fixes: 7bc54b652f13 ("timers, cpufreq/powernv: Initialize the gpstate timer as pinned") Cc: stable@vger.kernel.org # v4.8+ Reported-by: Nicholas Piggin <npiggin@gmail.com> Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
(cherry picked from commit c0f7f5b6c69107ca92909512533e70258ee19188) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Colin King <colin.king@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Xin Long [Fri, 20 Apr 2018 16:14:00 +0000 (18:14 +0200)]
xfrm: reuse uncached_list to track xdsts
BugLink: http://bugs.launchpad.net/bugs/1746474
In early time, when freeing a xdst, it would be inserted into
dst_garbage.list first. Then if it's refcnt was still held
somewhere, later it would be put into dst_busy_list in
dst_gc_task().
When one dev was being unregistered, the dev of these dsts in
dst_busy_list would be set with loopback_dev and put this dev.
So that this dev's removal wouldn't get blocked, and avoid the
kmsg warning:
kernel:unregister_netdevice: waiting for veth0 to become \
free. Usage count = 2
However after Commit 52df157f17e5 ("xfrm: take refcnt of dst
when creating struct xfrm_dst bundle"), the xdst will not be
freed with dst gc, and this warning happens.
To fix it, we need to find these xdsts that are still held by
others when removing the dev, and free xdst's dev and set it
with loopback_dev.
But unfortunately after flow_cache for xfrm was deleted, no
list tracks them anymore. So we need to save these xdsts
somewhere to release the xdst's dev later.
To make this easier, this patch is to reuse uncached_list to
track xdsts, so that the dev refcnt can be released in the
event NETDEV_UNREGISTER process of fib_netdev_notifier.
Thanks to Florian, we could move forward this fix quickly.
Fixes: 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") Reported-by: Jianlin Shi <jishi@redhat.com> Reported-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit 510c321b557121861601f9d259aadd65aa274f35) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Seth Forshee [Thu, 17 May 2018 15:25:00 +0000 (17:25 +0200)]
UBUNTU: [Config] Add nfp.ko to generic inclusion list
BugLink: http://bugs.launchpad.net/bugs/1768526
Move this to linux-modules so that VFs of Netronome Agilio
SmartNICs which have been made available to guests using PCI
pass-through can be used by those guests.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Khaled Elmously <khalid.elmously@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
x86/xen: Reset VCPU0 info pointer after shared_info remap
BugLink: http://bugs.launchpad.net/bugs/1771679
This patch fixes crashes during boot for HVM guests on older (pre HVM
vector callback) Xen versions. Without this, current kernels will always
fail to boot on those Xen versions.
During boot, the HYPERVISOR_shared_info page gets remapped to make it work
with KASLR. This means that any pointer derived from it needs to be
adjusted.
The only value that this applies to is the vcpu_info pointer for VCPU 0.
For PV and HVM with the callback vector feature, this gets done via the
smp_ops prepare_boot_cpu callback. Older Xen versions do not support the
HVM callback vector, so there is no Xen-specific smp_ops set up in that
scenario. So, the vcpu_info pointer for VCPU 0 never gets set to the proper
value, and the first reference of it will be bad. Fix this by resetting it
immediately after the remap.
Signed-off-by: Frank van der Linden <fllinden@amazon.com> Reviewed-by: Eduardo Valentin <eduval@amazon.com> Reviewed-by: Alakesh Haloi <alakeshh@amazon.com> Reviewed-by: Vallish Vaidyeshwara <vallish@amazon.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: xen-devel@lists.xenproject.org Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
(cherry picked from commit d1ecfa9d1f402366b1776fbf84e635678a51414f) Signed-off-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Colin King <colin.king@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The X86_FEATURE_SSBD is an synthetic CPU feature - that is
it bit location has no relevance to the real CPUID 0x7.EBX[31]
bit position. For that we need the new CPU feature name.
Fixes: 52817587e706 ("x86/cpufeatures: Disentangle SSBD enumeration") CC: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CVE-2018-3639 (x86)
(cherry-picked from https://patchwork.kernel.org/patch/10416823/) Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Tom Lendacky [Thu, 10 May 2018 20:06:39 +0000 (22:06 +0200)]
KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBD
Expose the new virtualized architectural mechanism, VIRT_SSBD, for using
speculative store bypass disable (SSBD) under SVM. This will allow guests
to use SSBD on hardware that uses non-architectural mechanisms for enabling
SSBD.
[ tglx: Folded the migration fixup from Paolo Bonzini ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
CVE-2018-3639 (x86)
Thomas Gleixner [Thu, 10 May 2018 18:42:48 +0000 (20:42 +0200)]
x86/speculation, KVM: Implement support for VIRT_SPEC_CTRL/LS_CFG
Add the necessary logic for supporting the emulated VIRT_SPEC_CTRL MSR to
x86_virt_spec_ctrl(). If either X86_FEATURE_LS_CFG_SSBD or
X86_FEATURE_VIRT_SPEC_CTRL is set then use the new guest_virt_spec_ctrl
argument to check whether the state must be modified on the host. The
update reuses speculative_store_bypass_update() so the ZEN-specific sibling
coordination can be reused.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
CVE-2018-3639 (x86)
Thomas Gleixner [Sat, 12 May 2018 18:10:00 +0000 (20:10 +0200)]
x86/bugs: Rework spec_ctrl base and mask logic
x86_spec_ctrL_mask is intended to mask out bits from a MSR_SPEC_CTRL value
which are not to be modified. However the implementation is not really used
and the bitmask was inverted to make a check easier, which was removed in
"x86/bugs: Remove x86_spec_ctrl_set()"
Aside of that it is missing the STIBP bit if it is supported by the
platform, so if the mask would be used in x86_virt_spec_ctrl() then it
would prevent a guest from setting STIBP.
Add the STIBP bit if supported and use the mask in x86_virt_spec_ctrl() to
sanitize the value which is supplied by the guest.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de>
CVE-2018-3639 (x86)
Thomas Gleixner [Sat, 12 May 2018 18:53:14 +0000 (20:53 +0200)]
x86/bugs: Remove x86_spec_ctrl_set()
x86_spec_ctrl_set() is only used in bugs.c and the extra mask checks there
provide no real value as both call sites can just write x86_spec_ctrl_base
to MSR_SPEC_CTRL. x86_spec_ctrl_base is valid and does not need any extra
masking or checking.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CVE-2018-3639 (x86)
Thomas Gleixner [Sat, 12 May 2018 18:49:16 +0000 (20:49 +0200)]
x86/bugs: Expose x86_spec_ctrl_base directly
x86_spec_ctrl_base is the system wide default value for the SPEC_CTRL MSR.
x86_spec_ctrl_get_default() returns x86_spec_ctrl_base and was intended to
prevent modification to that variable. Though the variable is read only
after init and globaly visible already.
Remove the function and export the variable instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CVE-2018-3639 (x86)
Function bodies are very similar and are going to grow more almost
identical code. Add a bool arg to determine whether SPEC_CTRL is being set
for the guest or restored to the host.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CVE-2018-3639 (x86)
The upcoming support for the virtual SPEC_CTRL MSR on AMD needs to reuse
speculative_store_bypass_update() to avoid code duplication. Add an
argument for supplying a thread info (TIF) value and create a wrapper
speculative_store_bypass_update_current() which is used at the existing
call site.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CVE-2018-3639 (x86)
Tom Lendacky [Thu, 17 May 2018 15:09:18 +0000 (17:09 +0200)]
x86/speculation: Add virtualized speculative store bypass disable support
Some AMD processors only support a non-architectural means of enabling
speculative store bypass disable (SSBD). To allow a simplified view of
this to a guest, an architectural definition has been created through a new
CPUID bit, 0x80000008_EBX[25], and a new MSR, 0xc001011f. With this, a
hypervisor can virtualize the existence of this definition and provide an
architectural method for using SSBD to a guest.
Add the new CPUID feature, the new MSR and update the existing SSBD
support to use this MSR when present.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de>
CVE-2018-3639 (x86)
Thomas Gleixner [Wed, 9 May 2018 21:01:01 +0000 (23:01 +0200)]
x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
AMD is proposing a VIRT_SPEC_CTRL MSR to handle the Speculative Store
Bypass Disable via MSR_AMD64_LS_CFG so that guests do not have to care
about the bit position of the SSBD bit and thus facilitate migration.
Also, the sibling coordination on Family 17H CPUs can only be done on
the host.
Extend x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() with an
extra argument for the VIRT_SPEC_CTRL MSR.
Hand in 0 from VMX and in SVM add a new virt_spec_ctrl member to the CPU
data structure which is going to be used in later patches for the actual
implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CVE-2018-3639 (x86)
Thomas Gleixner [Wed, 9 May 2018 19:53:09 +0000 (21:53 +0200)]
x86/speculation: Handle HT correctly on AMD
The AMD64_LS_CFG MSR is a per core MSR on Family 17H CPUs. That means when
hyperthreading is enabled the SSBD bit toggle needs to take both cores into
account. Otherwise the following situation can happen:
CPU0 CPU1
disable SSB
disable SSB
enable SSB <- Enables it for the Core, i.e. for CPU0 as well
So after the SSB enable on CPU1 the task on CPU0 runs with SSB enabled
again.
On Intel the SSBD control is per core as well, but the synchronization
logic is implemented behind the per thread SPEC_CTRL MSR. It works like
this:
i.e. if one of the threads enables a mitigation then this affects both and
the mitigation is only disabled in the core when both threads disabled it.
Add the necessary synchronization logic for AMD family 17H. Unfortunately
that requires a spinlock to serialize the access to the MSR, but the locks
are only shared between siblings.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CVE-2018-3639 (x86)
Thomas Gleixner [Thu, 10 May 2018 17:13:18 +0000 (19:13 +0200)]
x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS
The availability of the SPEC_CTRL MSR is enumerated by a CPUID bit on
Intel and implied by IBRS or STIBP support on AMD. That's just confusing
and in case an AMD CPU has IBRS not supported because the underlying
problem has been fixed but has another bit valid in the SPEC_CTRL MSR,
the thing falls apart.
Add a synthetic feature bit X86_FEATURE_MSR_SPEC_CTRL to denote the
availability on both Intel and AMD.
While at it replace the boot_cpu_has() checks with static_cpu_has() where
possible. This prevents late microcode loading from exposing SPEC_CTRL, but
late loading is already very limited as it does not reevaluate the
mitigation options and other bits and pieces. Having static_cpu_has() is
the simplest and least fragile solution.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CVE-2018-3639 (x86)
Borislav Petkov [Wed, 2 May 2018 16:15:14 +0000 (18:15 +0200)]
x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
Intel and AMD have different CPUID bits hence for those use synthetic bits
which get set on the respective vendor's in init_speculation_control(). So
that debacles like what the commit message of
Thomas Gleixner [Fri, 11 May 2018 13:21:01 +0000 (15:21 +0200)]
KVM: SVM: Move spec control call after restore of GS
svm_vcpu_run() invokes x86_spec_ctrl_restore_host() after VMEXIT, but
before the host GS is restored. x86_spec_ctrl_restore_host() uses 'current'
to determine the host SSBD state of the thread. 'current' is GS based, but
host GS is not yet restored and the access causes a triple fault.
Move the call after the host GS restore.
Fixes: 885f82bfbc6f x86/process: Allow runtime control of Speculative Store Bypass Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
CVE-2018-3639 (x86)
x86/bugs: Fix the parameters alignment and missing void
Fixes: 7bb4d366c ("x86/bugs: Make cpu_show_common() static") Fixes: 24f7fc83b ("x86/bugs: Provide boot parameters for the spec_store_bypass_disable mitigation") Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
CVE-2018-3639 (x86)
ACPI / PM: Do not reconfigure GPEs for suspend-to-idle
BugLink: http://bugs.launchpad.net/bugs/1771542
It is reported that commit 235d81a630ca (ACPI / PM: Clean up device
wakeup enable/disable code) broke wakeup from suspend-to-idle on
some platforms. That is due to the acpi_enable_all_wakeup_gpes() in
acpi_s2idle_prepare() which needs acpi_enable_wakeup_devices() to be
called before it as the latter sets up the GPE masks used by the
former and commit 235d81a630ca removed acpi_enable_wakeup_devices()
invocation from the suspend-to-idle path.
However, acpi_enable_wakeup_devices() does more than just setting
the GPE masks and the remaining part of it is not necessary for
suspend-to-idle. Moreover, non-wakeup GPEs are disabled on suspend-
to-idle entry to avoid spurious wakeups, but that should not be
strictly necessary any more after commit 33e4f80ee69b (ACPI / PM:
Ignore spurious SCI wakeups from suspend-to-idle) which prevents
spurious GPE wakeups from resuming the system. The only consequence
of leaving non-wakeup GPEs enabled may be more interrupt-related
activity while suspended, which is not ideal (more energy is used
if that happens), but it is not critical too.
For this reason, drop the GPE reconfiguration from the suspend-to-idle
path entirely.
This change also allows Dells XPS13 9360 blacklisted by commit 71630b7a832f (ACPI / PM: Blacklist Low Power S0 Idle _DSM for Dell
XPS13 9360) to use the power button for waking up from suspend-
to-idle and it helps at least one other older Dell system (the
wakeup button GPE on that one is not listed in _PRW for any
devices, so it is not regarded as a wakeup one and gets disabled
on suspend-to-idle entry today).
Fixes: 235d81a630ca (ACPI / PM: Clean up device wakeup enable/disable code) Reported-by: Du Wenkai <wenkai.du@intel.com> Tested-by: Du Wenkai <wenkai.du@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 147a7d9d25ca2551aab15071cb1f048ecd9b7953) Signed-off-by: Woodrow Shen <woodrow.shen@canonical.com> Acked-by: AceLan Kao <acelan.kao@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Wei Yongjun [Wed, 2 May 2018 21:27:00 +0000 (23:27 +0200)]
firmware: arm_sdei: Fix return value check in sdei_present_dt()
BugLink: https://bugs.launchpad.net/bugs/1768663
In case of error, the function of_platform_device_create() returns
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Fixes: 677a60bd2003 ("firmware: arm_sdei: Discover SDEI support via ACPI") Acked-by: James Morse <james.morse@arm.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 2f7aacf795e0192648b51674aef90e755e02408c) Signed-off-by: dann frazier <dann.frazier@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from linux-next commit 292eba02dbb4c41da840e462e51ee97d80d873d1) Signed-off-by: dann frazier <dann.frazier@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Theodore Ts'o [Mon, 14 May 2018 05:41:00 +0000 (07:41 +0200)]
ext4: fail ext4_iget for root directory if unallocated
CVE-2018-1092
If the root directory has an i_links_count of zero, then when the file
system is mounted, then when ext4_fill_super() notices the problem and
tries to call iput() the root directory in the error return path,
ext4_evict_inode() will try to free the inode on disk, before all of
the file system structures are set up, and this will result in an OOPS
caused by a NULL pointer dereference.
Lyude [Fri, 11 May 2018 16:00:53 +0000 (12:00 -0400)]
drm/nouveau: Fix deadlock in nv50_mstm_register_connector()
BugLink: http://bugs.launchpad.net/bugs/1763189
Currently; we're grabbing all of the modesetting locks before adding MST
connectors to fbdev. This isn't actually necessary, and causes a
deadlock as well:
======================================================
WARNING: possible circular locking dependency detected
4.17.0-rc3Lyude-Test+ #1 Tainted: G O
------------------------------------------------------
kworker/1:0/18 is trying to acquire lock: 00000000c832f62d (&helper->lock){+.+.}, at: drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
but task is already holding lock: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
other info that might help us debug this:
Chain exists of:
&helper->lock --> crtc_ww_class_acquire --> crtc_ww_class_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(crtc_ww_class_mutex);
lock(crtc_ww_class_acquire);
lock(crtc_ww_class_mutex);
lock(&helper->lock);
Taking example from i915, the only time we need to hold any modesetting
locks is when changing the port on the mstc, and in that case we only
need to hold the connection mutex.
Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
(cherry-picked from 352672db857290ab5b0e2b6a99c414f92bee024c) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Acked-by: Kleber Souza <kleber.souza@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
PCI / PM: Check device_may_wakeup() in pci_enable_wake()
BugLink: http://bugs.launchpad.net/bugs/1745646
Commit 0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code)
went too far and dropped the device_may_wakeup() check from
pci_enable_wake() which causes wakeup to be enabled during system
suspend, hibernation or shutdown for some PCI devices that are not
allowed by user space to wake up the system from sleep (or power off).
As a result of this excessive power is drawn by some of the affected
systems while in sleep states or off.
Restore the device_may_wakeup() check in pci_enable_wake(), but make
sure that the PCI bus type's runtime suspend callback will not call
device_may_wakeup() which is about system wakeup from sleep and not
about device wakeup from runtime suspend.
Fixes: 0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code) Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: 4.13+ <stable@vger.kernel.org> # 4.13+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
(cherry-picked from cfcadfaad7251d8b640713724b388164d75465b2) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Acked-by: Kleber Souza <kleber.souza@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Jani Nikula [Fri, 11 May 2018 16:56:06 +0000 (12:56 -0400)]
drm/i915/bios: filter out invalid DDC pins from VBT child devices
BugLink: http://bugs.launchpad.net/bugs/1764194
The VBT contains the DDC pin to use for specific ports. Alas, sometimes
the field appears to contain bogus data, and while we check for it later
on in intel_gmbus_get_adapter() we fail to check the returned NULL on
errors. Oops results.
The simplest approach seems to be to catch and ignore the bogus DDC pins
already at the VBT parsing phase, reverting to fixed per port default
pins. This doesn't guarantee display working, but at least it prevents
the oops. And we continue to be fuzzed by VBT.
One affected machine is Dell Latitude 5590 where a BIOS upgrade added
invalid DDC pins.
Luca Coelho [Fri, 11 May 2018 06:33:00 +0000 (08:33 +0200)]
iwlwifi: add shared clock PHY config flag for some devices
BugLink: https://bugs.launchpad.net/bugs/1748853
Some devices use a shared clock which is very sensitive to variations
and cause trouble in some situations. We need to set a bit in the phy
configuration to indicate that to the FW. To make this generic, add a
extra_phy_config_flags element to the device configuration and OR it
into the phy_cfg before sending it to the firmware. And also create a
set of configurations for devices that use shared clocks and need this
extra bit to be set.
Fixes: c62446d2b028 ("iwlwifi: add new 9460 series PCI IDs") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
(backported from commit 86a2b2043af79deff5cf000c5a08847faa4f2ee0) Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The device in question is not power managed by platform firmware,
furthermore, it only supports PME# from D3cold:
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Before commit de3ef1eb1cd0, the device never gets runtime suspended.
After that commit, the device gets runtime suspended to D3hot, which can
not generate any PME#.
So pci_dev_run_wake() needs to check PME wakeup capability as its first
condition.
In addition, change wakeup flag passed to pci_target_state() from false
to true, because we want to find the deepest state different from D3cold
that the device can still generate PME#. In this case, it's D0 for the
device in question.
Fixes: de3ef1eb1cd0 (PM / core: Drop run_wake flag from struct dev_pm_info) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: 4.13+ <stable@vger.kernel.org> # 4.13+ Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 8feaec33b9868582654cd3d5355225dcb79aeca6) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by: AceLan Kao <acelan.kao@canonical.com> Acked-by: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Jeffrey Hugo [Tue, 15 May 2018 14:36:00 +0000 (16:36 +0200)]
init: fix false positives in W+X checking
load_module() creates W+X mappings via __vmalloc_node_range() (from
layout_and_allocate()->move_module()->module_alloc()) by using
PAGE_KERNEL_EXEC. These mappings are later cleaned up via
"call_rcu_sched(&freeinit->rcu, do_free_init)" from do_init_module().
This is a problem because call_rcu_sched() queues work, which can be run
after debug_checkwx() is run, resulting in a race condition. If hit,
the race results in a nasty splat about insecure W+X mappings, which
results in a poor user experience as these are not the mappings that
debug_checkwx() is intended to catch.
This issue is observed on multiple arm64 platforms, and has been
artificially triggered on an x86 platform.
Address the race by flushing the queued work before running the
arch-defined mark_rodata_ro() which then calls debug_checkwx().
Link: http://lkml.kernel.org/r/1525103946-29526-1-git-send-email-jhugo@codeaurora.org Fixes: e1a58320a38d ("x86/mm: Warn on W^X mappings") BugLink: https://launchpad.net/bugs/1769696 Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reported-by: Timur Tabi <timur@codeaurora.org> Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit ae646f0b9ca135b87bc73ff606ef996c3029780a) Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Acked-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Older devices with a serdev attached bcm bt hci, use an Interrupt ACPI
resource to describe the IRQ (rather then a GpioInt resource).
These device seem to all claim the IRQ is active-high and seem to all need
a DMI quirk to treat it as active-low. Instead simply always assume that
Interrupt resource specified IRQs are always active-low.
This fixes the bt device not being able to wake the host from runtime-
suspend on the: Asus T100TAM, Asus T200TA, Lenovo Yoga2 and the Toshiba
Encore, without the need to add 4 new DMI quirks for these models.
This also allows us to remove 2 DMI quirks for the Asus T100TA and Asus
T100CHI series. Likely the 2 remaining quirks can also be removed but I
could not find a DSDT of these devices to verify this.
Cc: stable@vger.kernel.org Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198953 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1554835 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Local random address needs to be updated before creating connection if
RPA from LE Direct Advertising Report was resolved in host. Otherwise
remote device might ignore connection request due to address mismatch.
This was affecting following qualification test cases:
GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C
Before patch:
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216
Address: 56:BC:E8:24:11:68 (Resolvable)
Identity type: Random (0x01)
Identity: F2:F1:06:3D:9C:42 (Static)
> HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Own address type: Random (0x01)
Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02)
> HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387
LE Direct Advertising Report (0x0b)
Num reports: 1
Event type: Connectable directed - ADV_DIRECT_IND (0x01)
Address type: Random (0x01)
Address: 53:38:DA:46:8C:45 (Resolvable)
Identity type: Public (0x00)
Identity: 11:22:33:44:55:66 (OUI 11-22-33)
Direct address type: Random (0x01)
Direct address: 7C:D6:76:8C:DF:82 (Resolvable)
Identity type: Random (0x01)
Identity: F2:F1:06:3D:9C:42 (Static)
RSSI: -74 dBm (0xb6)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737
Scanning: Disabled (0x00)
Filter duplicates: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
< HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444
Scan interval: 60.000 msec (0x0060)
Scan window: 60.000 msec (0x0060)
Filter policy: White list is not used (0x00)
Peer address type: Random (0x01)
Peer address: 53:38:DA:46:8C:45 (Resolvable)
Identity type: Public (0x00)
Identity: 11:22:33:44:55:66 (OUI 11-22-33)
Own address type: Random (0x01)
Min connection interval: 30.00 msec (0x0018)
Max connection interval: 50.00 msec (0x0028)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)
> HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971
LE Create Connection (0x08|0x000d) ncmd 1
Status: Success (0x00)
< HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385
> HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014
LE Create Connection Cancel (0x08|0x000e) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074
LE Connection Complete (0x01)
Status: Unknown Connection Identifier (0x02)
Handle: 0
Role: Master (0x00)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Connection interval: 0.00 msec (0x0000)
Connection latency: 0 (0x0000)
Supervision timeout: 0 msec (0x0000)
Master clock accuracy: 0x00
After patch:
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Own address type: Random (0x01)
Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02)
> HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619
LE Direct Advertising Report (0x0b)
Num reports: 1
Event type: Connectable directed - ADV_DIRECT_IND (0x01)
Address type: Random (0x01)
Address: 50:52:D9:A6:48:A0 (Resolvable)
Identity type: Public (0x00)
Identity: 11:22:33:44:55:66 (OUI 11-22-33)
Direct address type: Random (0x01)
Direct address: 7C:C1:57:A5:B7:A8 (Resolvable)
Identity type: Random (0x01)
Identity: F4:28:73:5D:38:B0 (Static)
RSSI: -70 dBm (0xba)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704
Scanning: Disabled (0x00)
Filter duplicates: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645
Address: 7C:C1:57:A5:B7:A8 (Resolvable)
Identity type: Random (0x01)
Identity: F4:28:73:5D:38:B0 (Static)
> HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613
Scan interval: 60.000 msec (0x0060)
Scan window: 60.000 msec (0x0060)
Filter policy: White list is not used (0x00)
Peer address type: Random (0x01)
Peer address: 50:52:D9:A6:48:A0 (Resolvable)
Identity type: Public (0x00)
Identity: 11:22:33:44:55:66 (OUI 11-22-33)
Own address type: Random (0x01)
Min connection interval: 30.00 msec (0x0018)
Max connection interval: 50.00 msec (0x0028)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)
> HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558
LE Create Connection (0x08|0x000d) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 0
Role: Master (0x00)
Peer address type: Random (0x01)
Peer address: 50:52:D9:A6:48:A0 (Resolvable)
Identity type: Public (0x00)
Identity: 11:22:33:44:55:66 (OUI 11-22-33)
Connection interval: 50.00 msec (0x0028)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Master clock accuracy: 0x07
@ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996
LE Address: 11:22:33:44:55:66 (OUI 11-22-33)
Flags: 0x00000000
Data length: 0
Patch series "mm/get_user_pages_fast fixes, cleanups", v2.
Turns out get_user_pages_fast and __get_user_pages_fast return different
values on error when given a single page: __get_user_pages_fast returns
0. get_user_pages_fast returns either 0 or an error.
Callers of get_user_pages_fast expect an error so fix it up to return an
error consistently.
Stress the difference between get_user_pages_fast and
__get_user_pages_fast to make sure callers aren't confused.
This patch (of 3):
__gup_benchmark_ioctl does not handle the case where get_user_pages_fast
fails:
- a negative return code will cause a buffer overrun
- returning with partial success will cause use of uninitialized
memory.
[akpm@linux-foundation.org: simplification] Link: http://lkml.kernel.org/r/1522962072-182137-3-git-send-email-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
get_user_pages_fast is supposed to be a faster drop-in equivalent of
get_user_pages. As such, callers expect it to return a negative return
code when passed an invalid address, and never expect it to return 0
when passed a positive number of pages, since its documentation says:
* Returns number of pages pinned. This may be fewer than the number
* requested. If nr_pages is 0 or negative, returns 0. If no pages
* were pinned, returns -errno.
When get_user_pages_fast fall back on get_user_pages this is exactly
what happens. Unfortunately the implementation is inconsistent: it
returns 0 if passed a kernel address, confusing callers: for example,
the following is pretty common but does not appear to do the right thing
with a kernel address:
ret = get_user_pages_fast(addr, 1, writeable, &page);
if (ret < 0)
return ret;
Change get_user_pages_fast to return -EFAULT when supplied a kernel
address to make it match expectations.
All callers have been audited for consistency with the documented
semantics.
Link: http://lkml.kernel.org/r/1522962072-182137-4-git-send-email-mst@redhat.com Fixes: 5b65c4677a57 ("mm, x86/mm: Fix performance regression in get_user_pages_fast()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
On an Output queue, both EMPTY and PENDING buffer states imply that the
buffer is ready for completion-processing by the upper-layer drivers.
So for a non-QEBSM Output queue, get_buf_states() merges mixed
batches of PENDING and EMPTY buffers into one large batch of EMPTY
buffers. The upper-layer driver (ie. qeth) later distuingishes PENDING
from EMPTY by inspecting the slsb_state for
QDIO_OUTBUF_STATE_FLAG_PENDING.
But the merge logic in get_buf_states() contains a bug that causes us to
erronously also merge ERROR buffers into such a batch of EMPTY buffers
(ERROR is 0xaf, EMPTY is 0xa1; so ERROR & EMPTY == EMPTY).
Effectively, most outbound ERROR buffers are currently discarded
silently and processed as if they had succeeded.
Note that this affects _all_ non-QEBSM device types, not just IQD with CQ.
Fix it by explicitly spelling out the exact conditions for merging.
For extracting the "get initial state" part out of the loop, this relies
on the fact that get_buf_states() is never called with a count of 0. The
QEBSM path already strictly requires this, and the two callers with
variable 'count' make sure of it.
Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks") Cc: <stable@vger.kernel.org> #v3.2+ Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Immediate retry of EQBS after CCQ 96 means that we potentially misreport
the state of buffers inspected during the first EQBS call.
This occurs when
1. the first EQBS finds all inspected buffers still in the initial state
set by the driver (ie INPUT EMPTY or OUTPUT PRIMED),
2. the EQBS terminates early with CCQ 96, and
3. by the time that the second EQBS comes around, the state of those
previously inspected buffers has changed.
If the state reported by the second EQBS is 'driver-owned', all we know
is that the previous buffers are driver-owned now as well. But we can't
tell if they all have the same state. So for instance
- the second EQBS reports OUTPUT EMPTY, but any number of the previous
buffers could be OUTPUT ERROR by now,
- the second EQBS reports OUTPUT ERROR, but any number of the previous
buffers could be OUTPUT EMPTY by now.
Effectively, this can result in both over- and underreporting of errors.
If the state reported by the second EQBS is 'HW-owned', that doesn't
guarantee that the previous buffers have not been switched to
driver-owned in the mean time. So for instance
- the second EQBS reports INPUT EMPTY, but any number of the previous
buffers could be INPUT PRIMED (or INPUT ERROR) by now.
This would result in failure to process pending work on the queue. If
it's the final check before yielding initiative, this can cause
a (temporary) queue stall due to IRQ avoidance.
Fixes: 25f269f17316 ("[S390] qdio: EQBS retry after CCQ 96") Cc: <stable@vger.kernel.org> #v3.2+ Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Commit 1cf03c00e7c1 "nfit: scrub and register regions in a workqueue"
mistakenly attempts to register a region per BLK aperture. There is
nothing to register for individual apertures as they belong as a set to
a BLK aperture group that are registered with a corresponding
DIMM-control-region. Filter them for registration to prevent some
needless devm_kzalloc() allocations.
Cc: <stable@vger.kernel.org> Fixes: 1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
[ 92.931922] 1 lock held by systemd-udevd/525:
[ 92.933642] #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x73/0x4f0
----------------------------------------
The reason of deadlock turned out that wait_event_interruptible() in
blk_queue_enter() got stuck with bdev->bd_mutex held at __blkdev_put()
due to q->mq_freeze_depth == 1.
[ 92.943530] 1 lock held by a.out/634:
[ 92.945105] #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x3c/0x1e0
----------------------------------------
The reason of q->mq_freeze_depth == 1 turned out that loop_set_status()
forgot to call blk_mq_unfreeze_queue() at error paths for
info->lo_encrypt_type != NULL case.
The code that fixes the crashes in the following commit introduced a small
memory leak:
commit 6a2cf8d3663e ("scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure")
Fixing this requires a bit of reworking, which I've explained. Also provide
some code cleanup.
There is a small window in qla2x00_probe_one where if qla2x00_alloc_queues
fails, we end up never freeing req and rsp and leak 0xc0 and 0xc8 bytes
respectively (the sizes of req and rsp).
I originally put in checks to test for this condition which were based on
the incorrect assumption that if ha->rsp_q_map and ha->req_q_map were
allocated, then rsp and req were allocated as well. This is incorrect.
There is a window between these allocations:
ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
goto probe_hw_failed;
ret = qla2x00_request_irqs(ha, rsp);
goto probe_failed;
if (qla2x00_alloc_queues(ha, req, rsp)) {
goto probe_failed;
[if successful, now ha->rsp_q_map and ha->req_q_map allocated]
To simplify this, we should just set req and rsp to NULL after we free
them. Sounds simple enough? The problem is that req and rsp are pointers
defined in the qla2x00_probe_one and they are not always passed by reference
to the routines that free them.
Here are paths which can free req and rsp:
PATH 1:
qla2x00_probe_one
ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
[req and rsp are passed by reference, but if this fails, we currently
do not NULL out req and rsp. Easily fixed]
PATH 2:
qla2x00_probe_one
failing in qla2x00_request_irqs or qla2x00_alloc_queues
probe_failed:
qla2x00_free_device(base_vha);
qla2x00_free_req_que(ha, req)
qla2x00_free_rsp_que(ha, rsp)
PATH 3:
qla2x00_probe_one:
failing in qla2x00_mem_alloc or qla2x00_create_host
probe_hw_failed:
qla2x00_free_req_que(ha, req)
qla2x00_free_rsp_que(ha, rsp)
PATH 1: This should currently work, but it doesn't because rsp and rsp are
not set to NULL in qla2x00_mem_alloc. Easily remedied.
PATH 2: req and rsp aren't passed in at all to qla2x00_free_device but are
derived from ha->req_q_map[0] and ha->rsp_q_map[0]. These are only set up if
qla2x00_alloc_queues succeeds.
In qla2x00_free_queues, we are protected from crashing if these don't exist
because req_qid_map and rsp_qid_map are only set on their allocation. We are
guarded in this way:
for (cnt = 0; cnt < ha->max_req_queues; cnt++) {
if (!test_bit(cnt, ha->req_qid_map))
continue;
PATH 3: This works. We haven't freed req or rsp yet (or they were never
allocated if qla2x00_mem_alloc failed), so we'll attempt to free them here.
To summarize, there are a few small changes to make this work correctly and
(and for some cleanup):
1) (For PATH 1) Set *rsp and *req to NULL in case of failure in
qla2x00_mem_alloc so these are correctly set to NULL back in
qla2x00_probe_one
2) After jumping to probe_failed: and calling qla2x00_free_device,
explicitly set rsp and req to NULL so further calls with these pointers do
not crash, i.e. the free queue calls in the probe_hw_failed section we fall
through to.
3) Fix return code check in the call to qla2x00_alloc_queues. We currently
drop the return code on the floor. The probe fails but the caller of the
probe doesn't have an error code, so it attaches to pci. This can result in
a crash on module shutdown.
4) Remove unnecessary NULL checks in qla2x00_free_req_que,
qla2x00_free_rsp_que, and the egregious NULL checks before kfrees and vfrees
in qla2x00_mem_free.
I tested this out running a scenario where the card breaks at various times
during initialization. I made sure I forced every error exit path in
qla2x00_probe_one.
Cc: <stable@vger.kernel.org> # v4.16 Fixes: 6a2cf8d3663e ("scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure") Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
We're neglecting to clear the umask after it's set, which can cause a
later unrelated rpc to (incorrectly) use the same umask if it happens to
be processed by the same thread.
There's a more subtle problem here too:
An NFSv4 compound request is decoded all in one pass before any
operations are executed.
Currently we're setting current->fs->umask at the time we decode the
compound. In theory a single compound could contain multiple creates
each setting a umask. In that case we'd end up using whichever umask
was passed in the *last* operation as the umask for all the creates,
whether that was correct or not.
So, we should just be saving the umask at decode time and waiting to set
it until we actually process the corresponding operation.
In practice it's unlikely any client would do multiple creates in a
single compound. And even if it did they'd likely be from the same
process (hence carry the same umask). So this is a little academic, but
we should get it right anyway.
Fixes: 47057abde515 (nfsd: add support for the umask attribute) Cc: stable@vger.kernel.org Reported-by: Lucash Stach <l.stach@pengutronix.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
This is a fix for a regression in 32 bit kernels caused by an invalid
check for pgoff overflow in hugetlbfs mmap setup. The check incorrectly
specified that the size of a loff_t was the same as the size of a long.
The regression prevents mapping hugetlbfs files at offsets greater than
4GB on 32 bit kernels.
On 32 bit kernels conversion from a page based unsigned long can not
overflow a loff_t byte offset. Therefore, skip this check if
sizeof(unsigned long) != sizeof(loff_t).
Link: http://lkml.kernel.org/r/20180330145402.5053-1-mike.kravetz@oracle.com Fixes: 63489f8e8211 ("hugetlbfs: check for pgoff value overflow") Reported-by: Dan Rue <dan.rue@linaro.org> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Yisheng Xie <xieyisheng1@huawei.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nic Losby <blurbdust@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple
concurrent xenstore accesses") made a subtle change to the semantic of
xenbus_dev_request_and_reply() and xenbus_transaction_end().
Before on an error response to XS_TRANSACTION_END
xenbus_dev_request_and_reply() would not decrement the active
transaction counter. But xenbus_transaction_end() has always counted the
transaction as finished regardless of the response.
The new behavior is that xenbus_dev_request_and_reply() and
xenbus_transaction_end() will always count the transaction as finished
regardless the response code (handled in xs_request_exit()).
But xenbus_dev_frontend tries to end a transaction on closing of the
device if the XS_TRANSACTION_END failed before. Trying to close the
transaction twice corrupts the reference count. So fix this by also
considering a transaction closed if we have sent XS_TRANSACTION_END once
regardless of the return code.
Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
As of now if we encounter an opaque dir while looking for a dentry, we set
d->last=true. This means that there is no need to look further in any of
the lower layers. This works fine as long as there are no redirets or
relative redircts. But what if there is an absolute redirect on the
children dentry of opaque directory. We still need to continue to look into
next lower layer. This patch fixes it.
Here is an example to demonstrate the issue. Say you have following setup.
upper: /redirect (redirect=/a/b/c)
lower1: /a/[b]/c ([b] is opaque) (c has absolute redirect=/a/b/d/)
lower0: /a/b/d/foo
Now "redirect" dir should merge with lower1:/a/b/c/ and lower0:/a/b/d.
Note, despite the fact lower1:/a/[b] is opaque, we need to continue to look
into lower0 because children c has an absolute redirect.
From commit 4b855ad37194 ("blk-mq: Create hctx for each present CPU),
blk-mq doesn't remap queue after CPU topo is changed, that said when
some of these offline CPUs become online, they are still mapped to
hctx 0, then hctx 0 may become the bottleneck of IO dispatch and
completion.
This patch sets up the mapping from the beginning, and aligns to
queue mapping for PCI device (blk_mq_pci_map_queues()).
Cc: Stefan Haberland <sth@linux.vnet.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: stable@vger.kernel.org Fixes: 4b855ad37194 ("blk-mq: Create hctx for each present CPU) Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
This patch orders getting budget and driver tag by making sure to acquire
driver tag after budget is got, this way can help to avoid the following
race:
1) before dispatch request from scheduler queue, get one budget first, then
dequeue a request, call it request A.
2) in another IO path for dispatching request B which is from hctx->dispatch,
driver tag is got, then try to get budget in blk_mq_dispatch_rq_list(),
unfortunately the budget is held by request A.
3) meantime blk_mq_dispatch_rq_list() is called for dispatching request
A, and try to get driver tag first, unfortunately no driver tag is
available because the driver tag is held by request B
4) both two IO pathes can't move on, and IO stall is caused.
This issue can be observed when running dbench on USB storage.
This patch fixes this issue by always getting budget before getting
driver tag.
Cc: stable@vger.kernel.org Fixes: de1482974080ec9e ("blk-mq: introduce .get_budget and .put_budget in blk_mq_ops") Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
If a task is holding a reference to a namespace on a removed controller,
the head will not be released. If the same controller is added again
later, its namespaces may not be successfully added. Instead, the user
will see kernel message "Duplicate IDs for nsid <X>".
This patch fixes that by skipping heads that don't have namespaces when
considering if a new namespace is safe to add.
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com> Cc: stable@vger.kernel.org Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
scsi_device_quiesce() uses synchronize_rcu() to guarantee that the
effect of blk_set_preempt_only() will be visible for percpu_ref_tryget()
calls that occur after the queue unfreeze by using the approach
explained in https://lwn.net/Articles/573497/. The rcu read lock and
unlock calls in blk_queue_enter() form a pair with the synchronize_rcu()
call in scsi_device_quiesce(). Both scsi_device_quiesce() and
blk_queue_enter() must either use regular RCU or RCU-sched.
Since neither the RCU-protected code in blk_queue_enter() nor
blk_queue_usage_counter_release() sleeps, regular RCU protection
is sufficient. Note: scsi_device_quiesce() does not have to be
modified since it already uses synchronize_rcu().
Reported-by: Tejun Heo <tj@kernel.org> Fixes: 3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Martin Steigerwald <martin@lichtvoll.de> Cc: stable@vger.kernel.org # v4.15 Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Commit 7a20b8a61eff81bdb7097a578752a74860e9d142 ("f2fs: allocate node
and hot data in the beginning of partition") introduces another mount
option, heap, to reset it back. But it does not do anything for heap
mode, so fix it.
Cc: stable@vger.kernel.org Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The APIC ID as parsed from ACPI MADT is validity checked with the
apic->apic_id_valid() callback, which depends on the selected APIC type.
For non X2APIC types APIC IDs >= 0xFF are invalid, but values > 0x7FFFFFFF
are detected as valid. This happens because the 'apicid' argument of the
apic_id_valid() callback is type 'int'. So the resulting comparison
apicid < 0xFF
evaluates to true for all unsigned int values > 0x7FFFFFFF which are handed
to default_apic_id_valid(). As a consequence, invalid APIC IDs in !X2APIC
mode are considered valid and accounted as possible CPUs.
Change the apicid argument type of the apic_id_valid() callback to u32 so
the evaluation is unsigned and returns the correct result.
[ tglx: Massaged changelog ]
Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: jgross@suse.com Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/1523322966-10296-1-git-send-email-lirongqing@baidu.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When ath9k was switched over to use the mac80211 intermediate queues,
node cleanup now drains the mac80211 queues. However, this call path is
not protected by rcu_read_lock() as it was previously entirely internal
to the driver which uses its own locking.
This leads to a possible rcu_dereference() without holding
rcu_read_lock(); but only if a station is cleaned up while having
packets queued on the TXQ. Fix this by adding the rcu_read_lock() to the
caller in ath9k.
Fixes: 50f08edf9809 ("ath9k: Switch to using mac80211 intermediate software queues.") Cc: stable@vger.kernel.org Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Initialize data->config_lock mutex before it is used by the driver code.
This fixes following warning on Odroid XU3 boards:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14)
[<c010dbec>] (show_stack) from [<c09b3f74>] (dump_stack+0x90/0xc8)
[<c09b3f74>] (dump_stack) from [<c0179528>] (register_lock_class+0x1c0/0x59c)
[<c0179528>] (register_lock_class) from [<c017bd1c>] (__lock_acquire+0x78/0x1850)
[<c017bd1c>] (__lock_acquire) from [<c017de30>] (lock_acquire+0xc8/0x2b8)
[<c017de30>] (lock_acquire) from [<c09ca59c>] (__mutex_lock+0x60/0xa0c)
[<c09ca59c>] (__mutex_lock) from [<c09cafd0>] (mutex_lock_nested+0x1c/0x24)
[<c09cafd0>] (mutex_lock_nested) from [<c068b0d0>] (ina2xx_set_shunt+0x70/0xb0)
[<c068b0d0>] (ina2xx_set_shunt) from [<c068b218>] (ina2xx_probe+0x88/0x1b0)
[<c068b218>] (ina2xx_probe) from [<c0673d90>] (i2c_device_probe+0x1e0/0x2d0)
[<c0673d90>] (i2c_device_probe) from [<c053a268>] (driver_probe_device+0x2b8/0x4a0)
[<c053a268>] (driver_probe_device) from [<c053a54c>] (__driver_attach+0xfc/0x120)
[<c053a54c>] (__driver_attach) from [<c05384cc>] (bus_for_each_dev+0x58/0x7c)
[<c05384cc>] (bus_for_each_dev) from [<c0539590>] (bus_add_driver+0x174/0x250)
[<c0539590>] (bus_add_driver) from [<c053b5e0>] (driver_register+0x78/0xf4)
[<c053b5e0>] (driver_register) from [<c0675ef0>] (i2c_register_driver+0x38/0xa8)
[<c0675ef0>] (i2c_register_driver) from [<c0102b40>] (do_one_initcall+0x48/0x18c)
[<c0102b40>] (do_one_initcall) from [<c0e00df0>] (kernel_init_freeable+0x110/0x1d4)
[<c0e00df0>] (kernel_init_freeable) from [<c09c8120>] (kernel_init+0x8/0x114)
[<c09c8120>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20)
Fixes: 5d389b125186 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The block address is saved after the block is initialized when
threshold_init_device() is called.
Use the saved block address, if available, rather than trying to
rediscover it.
This will avoid a call trace, when resuming from suspend, due to the
rdmsr_safe_on_cpu() call in get_block_address(). The rdmsr_safe_on_cpu()
call issues an IPI but we're running with interrupts disabled. This
triggers:
WARNING: CPU: 0 PID: 11523 at kernel/smp.c:291 smp_call_function_single+0xdc/0xe0
A use-after-free bug was caught by KASAN while running usdt related
code (BCC project. bcc/tests/python/test_usdt2.py):
==================================================================
BUG: KASAN: use-after-free in uprobe_perf_close+0x222/0x3b0
Read of size 4 at addr ffff880384f9b4a4 by task test_usdt2.py/870
The buggy address belongs to the object at ffff880384f9b480
which belongs to the cache task_struct of size 12928
It occurs because task_struct is freed before perf_event which refers
to the task and task flags are checked while teardown of the event.
perf_event_alloc() assigns task_struct to hw.target of perf_event,
but there is no reference counting for it.
As a fix we get_task_struct() in perf_event_alloc() at above mentioned
assignment and put_task_struct() in _free_event().
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 63b6da39bb38e8f1a1ef3180d32a39d6 ("perf: Fix perf_event_exit_task() race") Link: http://lkml.kernel.org/r/20180409100346.6416-1-bhole_prashant_q7@lab.ntt.co.jp Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
I suspect the reason is the per-cpu data is not in the linear chunk.
This could be restored if that was able to be fixed, but for now,
just remove the tracepoints.
Fixes: 0428491cba92 ("powerpc/mm: Trace tlbie(l) instructions") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
1. With the patch "x86/vector/msi: Switch to global reservation mode",
the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM
with SR-IOV. This is because when we reach hv_compose_msi_msg() by
request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup()
-> __irq_startup() -> irq_domain_activate_irq() -> ... ->
msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
disabled in __setup_irq().
Note: when we reach hv_compose_msi_msg() by another code path:
pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... ->
hv_compose_msi_msg(), local irq is not disabled.
hv_compose_msi_msg() depends on an interrupt from the host.
With interrupts disabled, a UP VM always hangs in the busy loop in
the function, because the interrupt callback hv_pci_onchannelcallback()
can not be called.
We can do nothing but work it around by polling the channel. This
is ugly, but we don't have any other choice.
2. If the host is ejecting the VF device before we reach
hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
forever, because at this time the host doesn't respond to the
CREATE_INTERRUPT request. This issue exists the first day the
pci-hyperv driver appears in the kernel.
Luckily, this can also by worked around by polling the channel
for the PCI_EJECT message and hpdev->state, and by checking the
PCI vendor ID.
Note: actually the above 2 issues also happen to a SMP VM, if
"hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode") Tested-by: Adrian Suhov <v-adsuho@microsoft.com> Tested-by: Chris Valean <v-chvale@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Cc: <stable@vger.kernel.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When we hot-remove the device, we first receive a PCI_EJECT message and
then receive a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.
The first message is offloaded to hv_eject_device_work(), and the second
is offloaded to pci_devices_present_work(). Both the paths can be running
list_del(&hpdev->list_entry), causing general protection fault, because
system_wq can run them concurrently.
The patch eliminates the race condition.
Since access to present/eject work items is serialized, we do not need the
hbus->enum_sem anymore, so remove it.
Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Link: https://lkml.kernel.org/r/KL1P15301MB00064DA6B4D221123B5241CFBFD70@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM Tested-by: Adrian Suhov <v-adsuho@microsoft.com> Tested-by: Chris Valean <v-chvale@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: squashed semaphore removal patch] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Cc: <stable@vger.kernel.org> # v4.6+ Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jack Morgenstein <jackm@mellanox.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The pci-hyperv driver's channel callback hv_pci_onchannelcallback() is not
really a hot path, so we don't need to mark it as a perf_device, meaning
with this patch all HV_PCIE channels' target_cpu will be CPU0.
Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Make sure that the HPMC (High Priority Machine Check) handler is 16-byte
aligned and that it's length in the IVT is a multiple of 16 bytes.
Otherwise PDC may decide not to call the HPMC crash handler.
Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
As found by the ubsan checker, the value of the 'index' variable can be
out of range for the bc[] array:
UBSAN: Undefined behaviour in arch/parisc/kernel/drivers.c:655:21
index 6 is out of range for type 'char [6]'
Backtrace:
[<104fa850>] __ubsan_handle_out_of_bounds+0x68/0x80
[<1019d83c>] check_parent+0xc0/0x170
[<1019d91c>] descend_children+0x30/0x6c
[<1059e164>] device_for_each_child+0x60/0x98
[<1019cd54>] parse_tree_node+0x40/0x54
[<1019d86c>] check_parent+0xf0/0x170
[<1019d91c>] descend_children+0x30/0x6c
[<1059e164>] device_for_each_child+0x60/0x98
[<1019d938>] descend_children+0x4c/0x6c
[<1059e164>] device_for_each_child+0x60/0x98
[<1019cd54>] parse_tree_node+0x40/0x54
[<1019cffc>] hwpath_to_device+0xa4/0xc4
Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
device_remove_group() was called on any cleanup, even if the
device attrs had not been added yet. That can occur in certain
error scenarios, so add a flag to know if it has been added.
Also make sure we remove the dev if we added it ourselves.
Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # 4.15 Cc: Laura Abbott <labbott@redhat.com> Tested-by: Bill Perkins <wmp@grnwood.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
To allow dual pipelines utilising two WPF entities when available, the
VSP was updated to support header-mode display list in continuous
pipelines.
A small bug in the status check of the command register causes the
second pipeline to be directly afflicted by the running of the first;
appearing as a perceived performance issue with stuttering display.
Fix the vsp1_dl_list_hw_update_pending() call to ensure that the read
comparison corresponds to the correct pipeline.
Fixes: eaf4bfad6ad8 ("v4l: vsp1: Add support for header display lists in continuous mode") Cc: "Stable v4.14+" <stable@vger.kernel.org> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
At put_v4l2_window32(), it tries to access kp->clips. However,
kp points to an userspace pointer. So, it should be obtained
via get_user(), otherwise it can OOPS:
lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP
content, but the value gets overwritten before it is returned and the
read goes ahead anyway. Make the read conditional as it should be
and preserve the error code.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
vhost_copy_to_user is used to copy vring used elements to userspace.
We should use VHOST_ADDR_USED instead of VHOST_ADDR_DESC.
Fixes: f88949138058 ("vhost: introduce O(1) vq metadata cache") Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Commit dd9d598c6657 ("ip_gre: add the support for i/o_flags update via
netlink") added the ability to change o_flags, but missed that the
GSO/LLTX features are disabled by default, and only enabled some gre
features are unused. Thus we also need to disable the GSO/LLTX features
on the device when the TUNNEL_SEQ or TUNNEL_CSUM flags are set.
These two examples should result in the same features being set:
ip link add gre_none type gre local 192.168.0.10 remote 192.168.0.20 ttl 255 key 0
ip link set gre_none type gre seq
ip link add gre_seq type gre local 192.168.0.10 remote 192.168.0.20 ttl 255 key 1 seq
Fixes: dd9d598c6657 ("ip_gre: add the support for i/o_flags update via netlink") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Xin Long <lucien.xin@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
We can't use l2tp_tunnel_find() to prevent l2tp_nl_cmd_tunnel_create()
from creating a duplicate tunnel. A tunnel can be concurrently
registered after l2tp_tunnel_find() returns. Therefore, searching for
duplicates must be done at registration time.
Finally, remove l2tp_tunnel_find() entirely as it isn't use anywhere
anymore.
Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
l2tp_tunnel_create() inserts the new tunnel into the namespace's tunnel
list and sets the socket's ->sk_user_data field, before returning it to
the caller. Therefore, there are two ways the tunnel can be accessed
and freed, before the caller even had the opportunity to take a
reference. In practice, syzbot could crash the module by closing the
socket right after a new tunnel was returned to pppol2tp_create().
This patch moves tunnel registration out of l2tp_tunnel_create(), so
that the caller can safely hold a reference before publishing the
tunnel. This second step is done with the new l2tp_tunnel_register()
function, which is now responsible for associating the tunnel to its
socket and for inserting it into the namespace's list.
While moving the code to l2tp_tunnel_register(), a few modifications
have been done. First, the socket validation tests are done in a helper
function, for clarity. Also, modifying the socket is now done after
having inserted the tunnel to the namespace's tunnels list. This will
allow insertion to fail, without having to revert theses modifications
in the error path (a followup patch will check for duplicate tunnels
before insertion). Either the socket is a kernel socket which we
control, or it is a user-space socket for which we have a reference on
the file descriptor. In any case, the socket isn't going to be closed
from under us.
Reported-by: syzbot+fbeeb5c3b538e8545644@syzkaller.appspotmail.com Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
After the patch the short-circuit logic for A was inverted:
if (A || vq->iotlb)
return A;
return B;
This patch fixes the regression by rewriting the checks in the obvious
way, no longer returning A when vq->iotlb is non-NULL (which is hard to
understand).
Reported-by: syzbot+65a84dde0214b0387ccd@syzkaller.appspotmail.com Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
On receiving a packet the state index points to the rstate which must be
used to fill up IP and TCP headers. But if the state index points to a
rstate which is unitialized, i.e. filled with zeros, it gets stuck in an
infinite loop inside ip_fast_csum trying to compute the ip checsum of a
header with zero length.
./scripts/faddr2line vmlinux slhc_uncompress+0x464/0x468 output:
ip_fast_csum at arch/arm64/include/asm/checksum.h:40
(inlined by) slhc_uncompress at drivers/net/slip/slhc.c:615
Adding a variable to indicate if the current rstate is initialized. If
such a packet arrives, move to toss state.
Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
rds_sendmsg() calls rds_send_mprds_hash() to find a c_path to use to
send a message. Suppose the RDS connection is not yet up. In
rds_send_mprds_hash(), it does
if (conn->c_npaths == 0)
wait_event_interruptible(conn->c_hs_waitq,
(conn->c_npaths != 0));
If it is interrupted before the connection is set up,
rds_send_mprds_hash() will return a non-zero hash value. Hence
rds_sendmsg() will use a non-zero c_path to send the message. But if
the RDS connection ends up to be non-MP capable, the message will be
lost as only the zero c_path can be used.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The Cinterion AHS8 is a 3G device with one embedded WWAN interface
using cdc_ether as a driver.
The modem is controlled via AT commands through the exposed TTYs.
AT+CGDCONT write command can be used to activate or deactivate a WWAN
connection for a PDP context defined with the same command. UE
supports one WWAN adapter.
Signed-off-by: Bassem Boubaker <bassem.boubaker@actia.fr> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Zhengjun Xing [Mon, 14 May 2018 08:21:00 +0000 (10:21 +0200)]
xhci: Fix Kernel oops in xhci dbgtty
BugLink: https://bugs.launchpad.net/bugs/1768852
tty_unregister_driver may be called more than 1 time in some
hotplug cases,it will cause the kernel oops. This patch checked
dbc_tty_driver to make sure it is unregistered only 1 time.
UBUNTU: [Packaging] Fix missing watchdog for Raspberry Pi
BugLink: http://bugs.launchpad.net/bugs/1766052
The bcm2835_wdt.ko module is required for Raspberry Pi systems to actually
reboot and shutdown. It should not get automatically blacklisted. See
https://github.com/raspberrypi/linux/issues/2523
ming_qian [Mon, 14 May 2018 05:37:00 +0000 (07:37 +0200)]
UBUNTU: SAUCE: media: uvcvideo: Support realtek's UVC 1.5 device
BugLink: https://bugs.launchpad.net/bugs/1763748
The length of UVC 1.5 video control is 48, and it id 34 for UVC 1.1.
Change it to 48 for UVC 1.5 device,
and the UVC 1.5 device can be recognized.
More changes to the driver are needed for full UVC 1.5 compatibility.
However, at least the UVC 1.5 Realtek RTS5847/RTS5852 cameras have
been reported to work well.
Signed-off-by: ming_qian <ming_qian@realsil.com.cn> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: AceLan Kao <acelan.kao@canonical.com> Acked-by: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
BugLink: http://bugs.launchpad.net/bugs/1769721
his adds support for the P950ER, which has the same required fixup as the P950HR, but has a different PCI ID.
Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Mika Westerberg [Thu, 3 May 2018 05:13:00 +0000 (07:13 +0200)]
thunderbolt: Prevent crash when ICM firmware is not running
BugLink: https://bugs.launchpad.net/bugs/1768292
On Lenovo ThinkPad Yoga 370 (and possibly some other Lenovo models as
well) the Thunderbolt host controller sometimes comes up in such way
that the ICM firmware is not running properly. This is most likely an
issue in BIOS/firmware but as side-effect driver crashes the kernel due
to NULL pointer dereference:
Paolo Pisati [Thu, 3 May 2018 08:25:00 +0000 (10:25 +0200)]
UBUNTU: [Config] snapdragon: DRM_I2C_ADV7511=y
BugLink: http://bugs.launchpad.net/bugs/1768761 Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Igor Russkikh [Wed, 2 May 2018 04:59:00 +0000 (06:59 +0200)]
net: aquantia: oops when shutdown on already stopped device
BugLink: https://bugs.launchpad.net/bugs/1767088
In case netdev is closed at the moment of pci shutdown, aq_nic_stop
gets called second time. napi_disable in that case hangs indefinitely.
In other case, if device was never opened at all, we get oops because
of null pointer access.
We should invoke aq_nic_stop conditionally, only if device is running
at the moment of shutdown.
Reported-by: David Arcari <darcari@redhat.com> Fixes: 90869ddfefeb ("net: aquantia: Implement pci shutdown callback") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 9a11aff25fd43d5bd2660ababdc9f564b0ba183a) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Igor Russkikh [Wed, 2 May 2018 04:59:00 +0000 (06:59 +0200)]
net: aquantia: Regression on reset with 1.x firmware
BugLink: https://bugs.launchpad.net/bugs/1767088
On ASUS XG-C100C with 1.5.44 firmware a special mode called "dirty wake"
is active. With this mode when motherboard gets powered (but no poweron
happens yet), NIC automatically enables powersave link and watches
for WOL packet.
This normally allows to powerup the PC after AC power failures.
Not all motherboards or bios settings gives power to PCI slots,
so this mode is not enabled on all the hardware.
4.16 linux driver introduced full hardware reset sequence
This is required since before that we had no NIC hardware
reset implemented and there were side effects of "not clean start".
But this full reset is incompatible with "dirty wake" WOL feature
it keeps the PHY link in a special mode forever. As a consequence,
driver sees no link and no traffic.
To fix this we forcibly change FW state to idle state before doing
the full reset. This makes FW to restore link state.
Fixes: c8c82eb net: aquantia: Introduce global AQC hardware reset sequence Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit cce96d1883dae4b79f44890e5118243d806da286) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Benjamin Poirier [Fri, 27 Apr 2018 18:31:00 +0000 (20:31 +0200)]
e1000e: Remove Other from EIAC
BugLink: http://bugs.launchpad.net/bugs/1764892
It was reported that emulated e1000e devices in vmware esxi 6.5 Build 7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver
overrun interrupt bursts", v4.15-rc1). Some tracing shows that after
e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other()
on emulated e1000e devices. In comparison, on real e1000e 82574 hardware,
icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation.
Some experimentation showed that this flaw in vmware e1000e emulation can
be worked around by not setting Other in EIAC. This is how it was before 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1).
Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 745d0bd3af99ccc8c5f5822f808cd133eadad6ac) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
UBUNTU: SAUCE: platform/x86: acer-wmi: add another KEY_POWER keycode
BugLink: http://bugs.launchpad.net/bugs/1766054
Now that we have informed the firmware that the Power Button driver is
active, laptops such as the Acer Swift 3 will generate a WMI key event with
code 0x87 when the power button key is pressed. Add this keycode to the
table so that it is converted to an appropriate input event.
Signed-off-by: Antonio Rosario Intilisano <antonio.intilisano@gmail.com> Acked-by: Gianfranco Costamagna <locutusofborg@debian.org> Cc: Chris Chiu <chiu@endlessm.com> Cc: Daniel Drake <drake@endlessm.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>