Valentina Manea [Thu, 23 Jan 2014 21:12:29 +0000 (23:12 +0200)]
staging: usbip: convert usbip-host driver to usb_device_driver
This driver was previously an interface driver. Since USB/IP
exports a whole device, not just an interface, it would make
sense to be a device driver.
This patch also modifies the way userspace sees and uses a
shared device:
* the usbip_status file is no longer created for interface 0, but for
the whole device (such as
/sys/devices/pci0000:00/0000:00:01.2/usb1/1-1/usbip_status).
* per interface information, such as interface class or protocol, is
no longer sent/received; only device specific information is
transmitted.
* since the driver was moved one level below in the USB architecture,
there is no need to bind/unbind each interface, just the device as a
whole.
Shuah Khan [Wed, 22 Jan 2014 21:24:29 +0000 (14:24 -0700)]
staging/usbip: Change vhci_hcd store_attach() device information message to include speed string
Change vhci_hcd store_attach() routine to include speed string in its device
information message. The current call to dev_info() prints out speed number
which is the enum number. Change to call usb_speed_string() to print speed
string in addition to the number.
When vhci_hcd is enabled, the following message floods the dmesg buffer.
This message doesn't provide any useful information other than cluttering
the dmesg buffer. Fix it by removing the message. There is another debug
message in this routine that dumps detailed port status change information.
staging: comedi: amplc_pci230: standardize error handling of subdev_8255_init()
The subdev_8255_init() call returns 0 for success of a negative errno for failure.
For aesthetics, change the error test in this driver from (rc < 0) to simply (rc)
to follow the style of the other users of this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: amplc_pc236: remove dev_err() message due to allocation failure
The subdev_8255_init() call can only fail due to the allocation of the private
data. This failure will alreay have produced an error message. Remove the
redundant dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: drivers: propogate errno from subdev_8255_init()
The initialization of the 8255 subdevice can fail due to the allocation
of the private data. Make sure all callers of subdev_8255_init() propogate
the errno.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhao, Gang [Wed, 5 Feb 2014 16:10:35 +0000 (00:10 +0800)]
staging: et131x: remove spinlock adapter->lock
adapter->lock is only used in et131x_multicast(), which is eventually
called by network stack function __dev_set_rx_mode(). __dev_set_rx_mode()
is always called by (net_device *)dev->addr_list_lock hold, to protect from
concurrent access. So adapter->lock is redundant.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Acked-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Thu, 6 Feb 2014 12:12:03 +0000 (10:12 -0200)]
imx-drm: imx-hdmi: Remove parentheses from returns
Fix the following checkpatch warnings:
ERROR: return is not a function, parentheses are not required
#462: FILE: drivers/staging/imx-drm/imx-hdmi.c:462:
+ return (hdmi->hdmi_data.enc_in_format !=
ERROR: return is not a function, parentheses are not required
#468: FILE: drivers/staging/imx-drm/imx-hdmi.c:468:
+ return ((hdmi->hdmi_data.enc_out_format == YCBCR422_8BITS) &&
ERROR: return is not a function, parentheses are not required
#475: FILE: drivers/staging/imx-drm/imx-hdmi.c:475:
+ return ((hdmi->hdmi_data.enc_in_format == YCBCR422_8BITS) &&
While at it, broke the return code from is_color_space_decimation() and
is_color_space_interpolation() for better readability
Dave Hansen [Mon, 3 Feb 2014 22:40:25 +0000 (14:40 -0800)]
staging: rtl8192u: remove unused files
I was doing some code audits looking at scattergather uses, and noticed
that update() in drivers/staging/rtl8192u/ieee80211/digest.c uses
sg.page which doesn't exist any longer, so this can't possibly compile.
Turns out that digest.c is actually unused. It doesn't get referenced
in a Makefile or get compiled and doesn't get used as far as I can see.
I then widened the search to all the files in the directory. There are
a *bunch* that look unused. I removed all of them, then added them
back one at a time until the driver compiled again.
Signed-off-by: Dave Hansen <dave.hansen@intel.com> Cc: jerry-chuang@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 28 Jan 2014 14:00:52 +0000 (17:00 +0300)]
staging: rtl8821ae: a couple macro expansion bugs
These macros need parentheses, otherwise it causes a macro expansion bug
when they are used like this:
ch->flags &= ~IEEE80211_CHAN_NO_IBSS;
This was found using Smatch:
drivers/staging/rtl8821ae/regd.c:200 _rtl_reg_apply_beaconing_flags()
warn: the 'IEEE80211_CHAN_NO_IBSS' macro might need parens
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rashika Kheria [Thu, 23 Jan 2014 22:44:00 +0000 (04:14 +0530)]
drivers: staging: Mark functions as static and remove unused function in bpctl_mod.c
Mark functions as static in bpctl_mod.c because they are not used
outside this file. Remove unused function from bpctl_mod.c.
This also eliminates the following warnings from bpctl_mod.c:
drivers/staging/silicom/bpctl_mod.c:1507:6: warning: no previous prototype for ‘send_bypass_clear_pulse’ [-Wmissing-prototypes]
drivers/staging/silicom/bpctl_mod.c:1762:5: warning: no previous prototype for ‘cmnd_on’ [-Wmissing-prototypes]
drivers/staging/silicom/bpctl_mod.c:1779:5: warning: no previous prototype for ‘cmnd_off’ [-Wmissing-prototypes]
Dan Carpenter [Thu, 23 Jan 2014 08:24:27 +0000 (11:24 +0300)]
staging: cxt1e1: cleanup mfg_template[] a bit
1) Make it static.
2) Change it to u8 data instead of short.
3) This means we can memcpy() it to the correct location instead of
using a for loop.
4) With memcpy() we can use the union member we want directly instead of
copying to the generic .bytes union member.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jones pointed out that commit 302433daf47aeb7d21d66e55fb84d6a8fffd4aed (staging: vt6656: device.h
Remove typedef enum __device_init_type.), improperly indented a line to
make it look like it was under the if line above it, but it wasn't.
So fix this up.
Reported-by: Dave Jones <davej@redhat.com> Cc: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver downloads Xilinx FPGA firmware using gpio pins.
It loads Xilinx FPGA bitstream format firmware image and
program the Xilinx FPGA using SelectMAP (parallel) mode.
Signed-off-by: Insop Song <insop.song@gainspeed.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lidza Louina [Fri, 17 Jan 2014 16:01:37 +0000 (11:01 -0500)]
staging: dgap: removes version.h dependency
This patch removes the version.h dependencies to the
driver.h, fep5.c and tty.c files. This header was used
to help the driver support different versions of the
kernel. The support for different versions was removed
in a previous patch.
Wei Yongjun [Tue, 14 Jan 2014 02:04:49 +0000 (10:04 +0800)]
ion: Fix sparse non static symbol warnings
Fixes the following sparse warnings:
drivers/staging/android/ion/ion_dummy_driver.c:26:19: warning: symbol 'idev' was not declared. Should it be static?
drivers/staging/android/ion/ion_dummy_driver.c:27:17: warning: symbol 'heaps' was not declared. Should it be static?
drivers/staging/android/ion/ion_dummy_driver.c:29:6: warning: symbol 'carveout_ptr' was not declared. Should it be static?
drivers/staging/android/ion/ion_dummy_driver.c:30:6: warning: symbol 'chunk_ptr' was not declared. Should it be static?
drivers/staging/android/ion/ion_dummy_driver.c:32:26: warning: symbol 'dummy_heaps' was not declared. Should it be static?
drivers/staging/android/ion/ion_dummy_driver.c:59:26: warning: symbol 'dummy_ion_pdata' was not declared. Should it be static?
I got this building Lustre:
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c: In function ‘kiblnd_kvaddr_to_page’:
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:532:2: warning: passing argument 1 of ‘is_vmalloc_addr’ makes pointer from integer without a cast [enabled by default]
Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andriy Skulysh [Wed, 22 Jan 2014 13:36:19 +0000 (21:36 +0800)]
staging/lustre/ptlrpc: flock deadlock detection does not work
Flock deadlocks are checked on the first attempt to grant
the flock only. If we try again to grant it after its
blocking lock is cancelled, we don't check for deadlocks
which also may exist.
Perform deadlock detection during reprocess
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1715
Lustre-change: http://review.whamcloud.com/3553 Signed-off-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com> Reviewed-by: Vitaly Fertman <vitaly_fertman@xyratex.com> Reviewed-by: Bruce Korb <bruce_korb@xyratex.com> Reviewed-by: Keith Mannthey <keith.mannthey@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is only part of the original Lustre commit, main part of which changes
user space code. And now the comments above struct hsm_copy is no more true.
Lustre-change: http://review.whamcloud.com/4737
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2062 Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr> Signed-off-by: Henri Doreau <henri.doreau@cea.fr> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging/lustre/mgs: set_param -P option that sets value permanently
set_param and conf_param have different syntaxes. Also conf_param
has unimplemented paths and no wildcarding support.
This patch adds set_param -P option, that replaces the whole
conf_param "direct" proc access with a simple upcall-type mechanism
from the MGC. Option conf_param is saved now for compatibility.
Part of the original Lustre commit changes server code.
The patch only picks up client side change.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3155
Lustre-change: http://review.whamcloud.com/6025 Signed-off-by: Artem Blagodarenko <artem_blagodarenko@xyratex.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Emoly Liu <emoly.liu@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Wed, 22 Jan 2014 13:36:15 +0000 (21:36 +0800)]
staging/lustre/idl: remove LASSERT/CLASSERT from lustre_idl.h
Remove the usage of LASSERT() and CLASSERT() from lustre_idl.h, so
that it is usable from userspace programs if needed. These have
crept in over the years, but are not intended to be there.
The CLASSERT() checks for fid swabbing were largely redundant, and
have been moved to lustre/fid/fid_handler.c.
There are still a few LASSERTs that need to be removed when FID-on-OST
is landed, but I don't want to remove them before that code lands.
There are also uses of CERROR() that could be removed at that time.
Lustre-change: http://review.whamcloud.com/5682
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1606 Signed-off-by: Andreas Dilger <adilger@whamcloud.com> Signed-off-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Christopher J. Morrone <chris.morrone.llnl@gmail.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Siyao [Wed, 22 Jan 2014 13:36:13 +0000 (21:36 +0800)]
staging/lustre/llite: don't d_add for create only files
This is only part of the original Lustre commit. Splitted to remove
d_add() for create only files, because the dentry is fake,
and will be released right after use.
Lustre-change: http://review.whamcloud.com/6797
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3486 Signed-off-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Peng Tao <bergwolf@gmail.com> Reviewed-by: Bobi Jam <bobijam@gmail.com> Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Alexey Shvetsov <alexxy@gentoo.org> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Siyao [Wed, 22 Jan 2014 13:36:12 +0000 (21:36 +0800)]
staging/lustre/llite: remove ll_d_root_ops
Mnt root dentry will never be revalidated, but its d_op->d_compare
will be called for its children, to simplify code, we use the same
ll_d_ops as normal dentries.
But its attribute may be invalid before access, this won't cause
any issue because it always exists, and the only operation depends
on its attribute is .permission, which has revalidated it in lustre
code.
So it's okay to remove ll_d_root_ops, and remove unnecessary checks
in lookup/revalidate/statahead.
Lustre-change: http://review.whamcloud.com/6797
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3486 Signed-off-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Peng Tao <bergwolf@gmail.com> Reviewed-by: Bobi Jam <bobijam@gmail.com> Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Alexey Shvetsov <alexxy@gentoo.org> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Mon, 3 Feb 2014 00:32:53 +0000 (16:32 -0800)]
Merge branch 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"The three major changes in this patchset is a implementation for
flexible userspace memory maps, cache-flushing fixes (again), and a
long-discussed ABI change to make EWOULDBLOCK the same value as
EAGAIN.
parisc has been the only platform where we had EWOULDBLOCK != EAGAIN
to keep HP-UX compatibility. Since we will probably never implement
full HP-UX support, we prefer to drop this compatibility to make it
easier for us with Linux userspace programs which mostly never checked
for both values. We don't expect major fall-outs because of this
change, and if we face some, we will simply rebuild the necessary
applications in the debian archives"
* 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: add flexible mmap memory layout support
parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc
parisc: convert uapi/asm/stat.h to use native types only
parisc: wire up sched_setattr and sched_getattr
parisc: fix cache-flushing
parisc/sti_console: prefer Linux fonts over built-in ROM fonts
Mikulas Patocka [Tue, 28 Jan 2014 23:11:33 +0000 (00:11 +0100)]
hpfs: optimize quad buffer loading
HPFS needs to load 4 consecutive 512-byte sectors when accessing the
directory nodes or bitmaps. We can't switch to 2048-byte block size
because files are allocated in the units of 512-byte sectors.
Previously, the driver would allocate a 2048-byte area using kmalloc,
copy the data from four buffers to this area and eventually copy them
back if they were modified.
In the current implementation of the buffer cache, buffers are allocated
in the pagecache. That means that 4 consecutive 512-byte buffers are
stored in consecutive areas in the kernel address space. So, we don't
need to allocate extra memory and copy the content of the buffers there.
This patch optimizes the code to avoid copying the buffers. It checks
if the four buffers are stored in contiguous memory - if they are not,
it falls back to allocating a 2048-byte area and copying data there.
Mikulas Patocka [Tue, 28 Jan 2014 23:10:44 +0000 (00:10 +0100)]
hpfs: remember free space
Previously, hpfs scanned all bitmaps each time the user asked for free
space using statfs. This patch changes it so that hpfs scans the
bitmaps only once, remembes the free space and on next invocation of
statfs it returns the value instantly.
New versions of wine are hammering on the statfs syscall very heavily,
making some games unplayable when they're stored on hpfs, with load
times in minutes.
This should be backported to the stable kernels because it fixes
user-visible problem (excessive level load times in wine).
Helge Deller [Fri, 31 Jan 2014 21:19:52 +0000 (22:19 +0100)]
parisc: add flexible mmap memory layout support
Add support for the flexible mmap memory layout (as described in
http://lwn.net/Articles/91829). This is especially very interesting on
parisc since we currently only support 32bit userspace (even with a
64bit Linux kernel).
Guy Martin [Thu, 16 Jan 2014 16:17:53 +0000 (17:17 +0100)]
parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc
On Linux, only parisc uses a different value for EWOULDBLOCK which
causes a lot of troubles for applications not checking for both values.
Since the hpux compat is long dead, make EWOULDBLOCK behave the same as
all other architectures.
Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 31 Jan 2014 22:00:38 +0000 (23:00 +0100)]
parisc: convert uapi/asm/stat.h to use native types only
The stat.h header file is exported to userspace. Some userspace
applications failed to compile due to missing/unknown types, so we
better convert it to use native types only (like it's done on other
architectures too).
Helge Deller [Fri, 31 Jan 2014 20:33:17 +0000 (21:33 +0100)]
parisc: fix cache-flushing
This commit: f8dae00684d678afa13041ef170cecfd1297ed40: parisc: Ensure full cache coherency for kmap/kunmap
caused negative caching side-effects, e.g. hanging processes with expect and
too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems.
This patch now partly reverts it and has been in production use on our debian buildd
makeservers since a week without any major problems.
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 31 Jan 2014 14:39:40 +0000 (15:39 +0100)]
parisc/sti_console: prefer Linux fonts over built-in ROM fonts
The built-in ROM fonts lack many necessary ASCII characters, which is
why it makes sens to prefer the Linux fonts instead if they are
available. This makes consoles on STI graphics cards which are not
supported by the stifb driver (e.g. Visualize FXe) looks much nicer.
Linus Torvalds [Sun, 2 Feb 2014 19:30:08 +0000 (11:30 -0800)]
Merge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
Pull SLAB changes from Pekka Enberg:
"Random bug fixes that have accumulated in my inbox over the past few
months"
* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
mm: Fix warning on make htmldocs caused by slab.c
mm: slub: work around unneeded lockdep warning
mm: sl[uo]b: fix misleading comments
slub: Fix possible format string bug.
slub: use lockdep_assert_held
slub: Fix calculation of cpu slabs
slab.h: remove duplicate kmalloc declaration and fix kernel-doc warnings
Linus Torvalds [Sun, 2 Feb 2014 19:28:48 +0000 (11:28 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown.
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: introduce -s to dump counters
tools/power turbostat: remove unused command line option
turbostat: Add option to report joules consumed per sample
turbostat: run on HSX
turbostat: Add a .gitignore to ignore the compiled turbostat binary
turbostat: Clean up error handling; disambiguate error messages; use err and errx
turbostat: Factor out common function to open file and exit on failure
turbostat: Add a helper to parse a single int out of a file
turbostat: Check return value of fscanf
turbostat: Use GCC's CPUID functions to support PIC
turbostat: Don't attempt to printf an off_t with %zx
turbostat: Don't put unprocessed uapi headers in the include path
Linus Torvalds [Sun, 2 Feb 2014 19:11:06 +0000 (11:11 -0800)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Here's a set of patches for (hopefully) -rc1. Some of them are fixes,
but a good number of them also do things such as enable new drivers in
the defconfigs for platforms that have such devices, increases
coverage of the multiplatform defconfig and some DTS changes that
plumbs up some of the devices that now have bindings and driver
support.
The commit dates are recent; we've mostly collected these fixes in the
last few days but I also had to rebuild the branch yesterday to sort
out some internal conflicts which reset the timestamps. The changes
should have been tested by each platform maintainer already (and few
of them have cross-platform impact) so I'm personally not too
concerned by it at this time"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA
ARM: multi_v7_defconfig: add mvebu drivers
clocksource: kona: Add basic use of external clock
drivers: bus: fix CCI driver kcalloc call parameters swap
ARM: dts: bcm28155-ap: Fix Card Detection GPIO
ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHY
ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not set
MAINTAINERS: ARM: SiRF: use regex patterns to involve all SiRF drivers
ARM: dts: zynq: Add SDHCI nodes
ARM: hisi: don't select SMP
ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS
ARM: multi_v7: copy most options from tegra_defconfig
ARM: iop32x: fix power off handling for the EM7210 board
ARM: integrator: restore static map on the CP
ARM: msm_defconfig: Enable MSM clock drivers
ARM: dts: msm: Add clock controller nodes and hook into uart
ARM: OMAP4+: move errata initialization to omap4_pm_init_early
ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle
ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP)
ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference
...
Jean Delvare [Sun, 2 Feb 2014 16:59:07 +0000 (17:59 +0100)]
hwmon: Fix SENSORS_TMP102 dependencies to eliminate build errors
Similar to what was done for the lm75 driver.
Add depends on THERMAL since that is what provides the
register/unregister functions above, but only if THERMAL_OF was
selected as this is an optional feature of the driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Jean Delvare [Sun, 2 Feb 2014 16:59:07 +0000 (17:59 +0100)]
hwmon: Fix SENSORS_LM75 dependencies to eliminate build errors
Based on an earlier attempt by Randy Dunlap.
Fix SENSORS_LM75 dependencies to eliminate build errors:
drivers/built-in.o: In function `lm75_remove':
lm75.c:(.text+0x12bd8c): undefined reference to `thermal_zone_of_sensor_unregister'
drivers/built-in.o: In function `lm75_probe':
lm75.c:(.text+0x12c123): undefined reference to `thermal_zone_of_sensor_register'
Add depends on THERMAL since that is what provides the
register/unregister functions above, but only if THERMAL_OF was
selected as this is an optional feature of the driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Linus Torvalds [Sat, 1 Feb 2014 19:03:16 +0000 (11:03 -0800)]
Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild changes from Michal Marek:
"The non-critical part of kbuild is small this time:
- Three fixes for make deb-pkg
- A new coccinelle check
One of the deb-pkg fixes is a leftover from the last merge window,
hence the merge commit"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
deb-pkg: Fix building for MIPS big-endian or ARM OABI
deb-pkg: Fix cross-building linux-headers package
scripts: Coccinelle script for pm_runtime_* return checks with IS_ERR_VALUE
deb-pkg: Inhibit initramfs builders if CONFIG_BLK_DEV_INITRD is not set
Pali Rohár [Tue, 28 Jan 2014 20:26:44 +0000 (20:26 +0000)]
afs: proc cells and rootcell are writeable
Both proc files are writeable and used for configuring cells. But
there is missing correct mode flag for writeable files. Without
this patch both proc files are read only.
[ It turns out they aren't really read-only, since root can write to
them even if the write bit isn't set due to CAP_DAC_OVERRIDE ]
Heiko Carstens [Fri, 31 Jan 2014 06:50:36 +0000 (07:50 +0100)]
tile: remove compat_sys_lookup_dcookie declaration to fix compile error
With commit d8d14bd09cdd ("fs/compat: fix lookup_dcookie() parameter
handling") I changed the type of the len parameter of the
lookup_dcookie() syscall.
However I missed that there was still a stale declaration in
arch/tile/.. which now causes a compile error on tile:
In file included from fs/dcookies.c:28:0:
include/linux/compat.h:425:17: error: conflicting types for 'compat_sys_lookup_dcookie'
fs/dcookies.c:207:1: error: conflicting types for 'compat_sys_lookup_dcookie'
Simply remove the declaration in the tile architecture, which is only a
leftover from before the different compat lookup_dcookie() versions have
been merged. The correct declaration is now in include/linux/compat.h
The build error was reported by Fenguang's build bot.
Linus Torvalds [Sat, 1 Feb 2014 18:52:45 +0000 (10:52 -0800)]
Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"A set of cifs fixes (mostly for symlinks, and SMB2 xattrs) and
cleanups"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix check for regular file in couldbe_mf_symlink()
[CIFS] Fix SMB2 mounts so they don't try to set or get xattrs via cifs
CIFS: Cleanup cifs open codepath
CIFS: Remove extra indentation in cifs_sfu_type
CIFS: Cleanup cifs_mknod
CIFS: Cleanup CIFSSMBOpen
cifs: Add support for follow_link on dfs shares under posix extensions
cifs: move unix extension call to cifs_query_symlink()
cifs: Re-order M-F Symlink code
cifs: Add create MFSymlinks to protocol ops struct
cifs: use protocol specific call for query_mf_symlink()
cifs: Rename MF symlink function names
cifs: Rename and cleanup open_query_close_cifs_symlink()
cifs: Fix memory leak in cifs_hardlink()
Linus Torvalds [Sat, 1 Feb 2014 18:43:45 +0000 (10:43 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"Several obvious fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Fix mountpoint reference leakage in linkat
hfsplus: use xattr handlers for removexattr
Typo in compat_sys_lseek() declaration
fs/super.c: sync ro remount after blocking writers
vfs: unexport the getname() symbol
Linus Torvalds [Sat, 1 Feb 2014 18:29:59 +0000 (10:29 -0800)]
Merge tag 'staging-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull rtl8812ae staging wireless driver from Greg KH:
"Here's a single staging driver for a wireless chipset that has shown
up in the SteamBox hardware. It is merged separately from the "main"
staging pull request to sync up with the wireless api changes that
came in from the networking tree.
It's self-contained and works for me and others. Larry will be
replacing it with a "real" driver for 3.15, but for now this one is
needed"
* tag 'staging-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8821ae: Enable build by reverting BROKEN marking
staging: r8821ae: Fix build problems
Staging: rtl8812ae: disable due to build errors
Staging: rtl8821ae: add TODO file
Staging: rtl8821ae: removed unused functions and variables
Staging: rtl8821ae: rc.c: fix up function prototypes
Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver
Revert "PCI: Remove from bus_list and release resources in pci_release_dev()"
Revert commit ef83b0781a73 "PCI: Remove from bus_list and release
resources in pci_release_dev()" that made some nasty race conditions
become possible. For example, if a Thunderbolt link is unplugged
and then replugged immediately, the pci_release_dev() resulting from
the hot-remove code path may be racing with the hot-add code path
which after that commit causes various kinds of breakage to happen
(up to and including a hard crash of the whole system).
Moreover, the problem that commit ef83b0781a73 attempted to address
cannot happen any more after commit 8a4c5c329de7 "PCI: Check parent
kobject in pci_destroy_dev()", because pci_destroy_dev() will now
return immediately if it has already been executed for the given
device.
Note, however, that the invocation of msi_remove_pci_irq_vectors()
removed by commit ef83b0781a73 from pci_free_resources() along with
the other changes made by it is not added back because of subsequent
code changes depending on that modification.
Fixes: ef83b0781a73 (PCI: Remove from bus_list and release resources in pci_release_dev()) Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olof Johansson [Fri, 31 Jan 2014 23:21:08 +0000 (15:21 -0800)]
ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA
TI_EDMA fell out of automatically selected options in the multi_v7
defconfig due to a select being removed from the davinci Kconfig entry. So
we need to re-enable explicitly to not regress some platforms.
The rest is just the result of running 'make multi_v7_defconfig + make
savedefconfig' to remove entries that are no longer needed due to changed
dependencies/selects or defaults.
Olof Johansson [Fri, 31 Jan 2014 23:20:07 +0000 (15:20 -0800)]
ARM: multi_v7_defconfig: add mvebu drivers
Recent boot farm testing has highlighted some issues with mvebu and
multiplatform kernels. Increase the test coverage so we can discover
these issues earlier.
Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
projects / mirror_ubuntu-artful-kernel.git / log