Beth Kon [Fri, 24 Jul 2009 16:26:59 +0000 (12:26 -0400)]
HPET fixes for reg writes
This patch addresses the problems found by Andriy Gapon:
- The code was incorrectly overwriting the high order 32
bits of the timer and hpet config registers. This didn't show up
in testing because linux and windows use hpet in legacy mode,
where the high order 32 bits (advertising available interrupts)
of the timer config register are ignored, and the high order 32
bits of the hpet config register are reserved and unused.
- The mask for level-triggered interrupts was off by a bit. (hpet
doesn't currently support level-triggered interrupts).
In addition, I removed some unused #defines, and corrected the ioapic
interrupt values advertised. I'd set this up early in hpet development
and never went back to correct it, and no bugs resulted since linux and
windows use hpet in legacy mode where available interrupts are ignored.
Signed-off-by: Beth Kon <eak@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Wed, 22 Jul 2009 15:03:52 +0000 (17:03 +0200)]
slirp: Fix guestfwd for incoming data
Unless a virtual server address was explicitly defined (which is
impossible with the legacy -net channel format), guestfwd did not
properly forwarded host->guest packets. This patch fixes it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qmu-img: fix qemu-img convert to generate a valid image when the source referenced a backing file
Make 'qemu-img convert' copies unallocated parts of the source image
when -B option was not specified.
Signed-off-by: Akkarit Sangpetch <asangpet@andrew.cmu.edu> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Fri, 17 Jul 2009 06:20:41 +0000 (08:20 +0200)]
vmdk: Fix backing file handling
Instead of storing the backing file in its own BlockDriverState, VMDK uses the
BlockDriverState of the raw image file it opened. This is wrong and breaks
functions that access the backing file or protocols. This fix replaces all
occurrences of s->hd->backing_* with bs->backing_*.
This fixes qemu-iotests failure in 020 (Commit changes to backing file).
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add save/restore support to the LSI logic SCSI device model.
This patch requires "Handle BH's queued by AIO completions in
qemu_aio_flush()" to work reliably. The combination of those two
patches survived 300+ migrations with heavy IO load running in the
guest.
Signed-off-by: Nolan Leake <nolan <at> sigbus.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christoph Egger [Fri, 17 Jul 2009 17:48:02 +0000 (17:48 +0000)]
isxdigit -> qemu_isxdigit
Hi!
Attached patch uses qemu_isxdigit() instead of isxdigit().
Fixes build warning on NetBSD.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
--
---to satisfy European Law for business letters:
Advanced Micro Devices GmbH
Karl-Hammerschmidt-Str. 34, 85609 Dornach b. Muenchen
Geschaeftsfuehrer: Thomas M. McCoy, Giuliano Meroni
Sitz: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632
Christoph Egger [Fri, 17 Jul 2009 17:48:01 +0000 (17:48 +0000)]
fix build warnings
Hi!
Attached patch fixes build warnings due to use of different pointer
signedness.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
--
---to satisfy European Law for business letters:
Advanced Micro Devices GmbH
Karl-Hammerschmidt-Str. 34, 85609 Dornach b. Muenchen
Geschaeftsfuehrer: Thomas M. McCoy, Giuliano Meroni
Sitz: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632
Blue Swirl [Fri, 17 Jul 2009 11:01:45 +0000 (11:01 +0000)]
Fix OpenBSD build
The header sys-queue.h must be #included early, otherwise at some point OS
queue macros will be used. On OpenBSD, those don't define TAILQ_FOREACH_SAFE.
#define snd_pcm_sw_params_alloca(ptr) do { assert(ptr); *ptr = (snd_pcm_sw_params_t *) alloca(snd_pcm_sw_params_sizeof()); memset(*ptr, 0, snd_pcm_sw_params_sizeof()); } while (0)
The assert generates: "error: the address of 'sw_params' will always
evaluate as 'true'" which combined with -Werror prevents alsaaudio.o
from being built with certain versions of GCC.
fix for bad macaddr of e1000 in Windows 2003 server with original MS driver
The sequence of reading from eeprom is "offset by one" moved because of a false
detection of a clock cycle after an eeprom reset. Keeping the last clock value
after a reset keeps it in sync.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add id field to DeviceState. Make "info qtree" print it.
This helps users and management apps identifying devices in monitor
output, which is especially useful with otherwise identical devices
such as two virtio disks.
This patch doesn't add a way to set the id, followup patches will do.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
no_user: prevent users from adding certain devices.
desc: description of the device.
alias: to allow user friendly shortcuts on the command line, i.e.
-device usbmouse instead of -device "QEMU USB Mouse" or
-device lsi instead of -device lsi53c895a
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This add support for switching devices into a compatibility mode
using device properties. Machine types can have a list of properties
for specific devices attached to allow the easy creation of machine
types compatible to older qemu versions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch is a major overhaul of the device properties. The properties
are saved directly in the device state struct now, the linked list of
property values is gone.
Advantages:
* We don't have to maintain the list with the property values.
* The value in the property list and the value actually used by
the device can't go out of sync any more (used to happen for
the pci.devfn == -1 case) because there is only one place where
the value is stored.
* A record describing the property is required now, you can't set
random properties any more.
There are bus-specific and device-specific properties. The former
should be used for properties common to all bus drivers. Typical
use case is bus addressing, i.e. pci.devfn and i2c.address.
Properties have a PropertyInfo struct attached with name, size and
function pointers to parse and print properties. A few common property
types have PropertyInfos defined in qdev-properties.c. Drivers are free
to implement their own very special property parsers if needed.
Properties can have default values. If unset they are zero-filled.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Glauber Costa [Tue, 14 Jul 2009 22:26:51 +0000 (18:26 -0400)]
fix segfault in setting migration speed
Hi,
Whoever wrote this migrate_set_speed function is totally stupid.
Any failed or completed migration keeps its state to allow probing of
migration data, but has no associated file anymore. It is, thus,
possible to crash qemu by calling migrate_set_speed after a migration
is finished (or failed, or cancelled), but before another one starts.
This patch fixes it.
Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stuart Brady [Sun, 12 Jul 2009 19:09:40 +0000 (20:09 +0100)]
Remove dead i386 assembly code from softmmu_header.h
This patch removes dead i386 assembly code from softmmu_header.h.
The code is conditional on ASM_SOFTMMU, which is never defined.
Optimisation for the fast path is already handled by tcg_out_qemu_ld()
and tcg_out_qemu_st(), so there seems to be little need for this code.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-io: use BDRV_O_FILE to implement the growable open option
Instead of doing our own check for protocols which fails because raw isn't
formally a protocol but special cased in find_protocol specify the BDRV_O_FILE
option to use the same code as bdrv_file_open does.
While we're at it also add the missing documentation for -g to the main
qemu-io help string.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Igor Kovalenko [Sat, 11 Jul 2009 22:15:40 +0000 (02:15 +0400)]
tlb flush cleanup
Use static empty variable s_cputlb_empty_entry to clear entries,
also reset addend member when clearing entries.
This helps running with valgrind/memcheck
Signed-off-by: igor.v.kovalenko@gmail.com
--
Kind regards,
Igor V. Kovalenko Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The load_vmstate and save_vmstate functions are implemented as a
variation of the normal read/write operation, enabled by the -b option.
This is the same mechanism as is used to switch from read/write to
pread/pwrite.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
ioport: use uint{32, 16, 8}_t for ioport value and pio_addr_t for ioport address.
Using int for cpu_{in, out}[bwl] is inconsistent with other part
because for address or value, uintN_t is used by other qemu part.
At least, softmmu, CPU{Read, Write}MemoryFunc, pci, target_phys_addr_t
and the callers of cpu_{in, out}[bwl]().
This patch removes the inconsistency.
IO port has its own address space so define pio_addr_t as uint32_t
because PCI io space width is 32bit.
And use uint{32, 16, 8}_t for ioport value.
Changing signedness of value might cause subtle issue. However
only a suspicious caller is kvm_handle_io() which is ok. And other callers
pass unsigned value in the first place.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Stuart Brady <sdbrady@ntlworld.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: Samuel Thibault <samuel.thibault@gnu.org> Cc: Tristan Gingold <gingold@adacore.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andre Przywara [Thu, 16 Jul 2009 12:49:31 +0000 (14:49 +0200)]
omit 3DNOW! CPUID bits from qemu64 CPU model
Since we recently do not disable 3DNOW! support anymore, we should
avoid setting the bits in the default qemu64 CPU model to ease
migration. TCG does not support it anyway and even AMD deprecates
it's usage nowadays.
If you want to use it in KVM, use the phenom, athlon or host CPU
model.
Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Tue, 14 Jul 2009 16:07:50 +0000 (18:07 +0200)]
honor -S on incoming migration
-S is not honored by qemu on incoming migration. If a domain is migrated
while paused, thus, it will start running on the remote machine; this
is wrong.
Given the trivial patch to fix this, it looks more like a thinko
than anything else, probably dating back to the qemu-kvm merge.
The interesting part is that the -S mechanism was in fact *used* when
migrating (setting autostart = 0) and the incoming migration code was
starting the VM at the end of the migration.
Since I was removing the vm_start from there, I also corrected a related
imprecision. The code was doing a vm_stop "just in case", but we can
be sure that the VM is not running---the vm_start call in vl.c has not
been reached yet. So the vm_stop is removed together with the vm_start.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
replace bdrv_{get, put}_buffer with bdrv_{load, save}_vmstate
The VM state offset is a concept internal to the image format. Replace
the old bdrv_{get,put}_buffer method that require an index into the
image file that is constructed from the VM state offset and an offset
into the vmstate with the bdrv_{load,save}_vmstate that just take an
offset into the VM state.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 10 Jul 2009 19:52:56 +0000 (14:52 -0500)]
bios: Fix multiple calls into smbios_load_ex
We're marking the used entry bitmap in smbios_load_external() for each
type we check, regardless of whether we loaded anything. This makes
subsequent calls behave as if we've already loaded the tables from qemu
and can result in missing tables (ex. multiple type4 entries on an SMP
guest). Only mark the bitmap if we actually load something.
Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Sat, 27 Jun 2009 07:53:51 +0000 (09:53 +0200)]
gdbstub: x86: Support for setting segment registers
This allows to set segment registers via gdb also in system emulation
mode. Basic sanity checks are applied and nothing is changed if they
fail. But screwing up the target via this interface will never be
complicated, so I avoided being too paranoid here.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>