MAINTAINERS: Fold "Block QAPI, monitor, ..." into "Block layer core"
Section "Block QAPI, monitor, command line" is about the external
interfaces we provide for block devices. It covers the relevant QAPI
schema parts, monitor and command line code, more or less.
The section's files are also covered by section "Block layer core",
except for the QAPI schema files.
I haven't acted as maintainer in this area for a long time. Make it
official: add the QAPI schema files to section "Block layer core", and
delete section "Block QAPI, monitor, command line".
Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221020120541.80757-1-armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* tag 'dump-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
dump/win_dump: limit number of processed PRCBs
s390x: pv: Add dump support
s390x: Add KVM PV dump interface
include/elf.h: add s390x note types
s390x: Introduce PV query interface
s390x: Add protected dump cap
dump: Add architecture section and section string table support
dump: Reintroduce memory_offset and section_offset
dump: Reorder struct DumpState
dump: Write ELF section headers right after ELF header
dump: Use a buffer for ELF section data and headers
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Oct 2022 14:53:41 +0000 (10:53 -0400)]
Merge tag 'pull-tcg-20221026' of https://gitlab.com/rth7680/qemu into staging
Revert incorrect cflags initialization.
Add direct jumps for tcg/loongarch64.
Speed up breakpoint check.
Improve assertions for atomic.h.
Move restore_state_to_opc to TCGCPUOps.
Cleanups to TranslationBlock maintenance.
* tag 'pull-tcg-20221026' of https://gitlab.com/rth7680/qemu: (47 commits)
accel/tcg: Remove restore_state_to_opc function
target/xtensa: Convert to tcg_ops restore_state_to_opc
target/tricore: Convert to tcg_ops restore_state_to_opc
target/sparc: Convert to tcg_ops restore_state_to_opc
target/sh4: Convert to tcg_ops restore_state_to_opc
target/s390x: Convert to tcg_ops restore_state_to_opc
target/rx: Convert to tcg_ops restore_state_to_opc
target/riscv: Convert to tcg_ops restore_state_to_opc
target/ppc: Convert to tcg_ops restore_state_to_opc
target/openrisc: Convert to tcg_ops restore_state_to_opc
target/nios2: Convert to tcg_ops restore_state_to_opc
target/mips: Convert to tcg_ops restore_state_to_opc
target/microblaze: Convert to tcg_ops restore_state_to_opc
target/m68k: Convert to tcg_ops restore_state_to_opc
target/loongarch: Convert to tcg_ops restore_state_to_opc
target/i386: Convert to tcg_ops restore_state_to_opc
target/hppa: Convert to tcg_ops restore_state_to_opc
target/hexagon: Convert to tcg_ops restore_state_to_opc
target/cris: Convert to tcg_ops restore_state_to_opc
target/avr: Convert to tcg_ops restore_state_to_opc
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Oct 2022 14:04:05 +0000 (10:04 -0400)]
Merge tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu into staging
aspeed queue :
* Performance improvement with Object class caching
* Serial Flash Discovery Parameters support for m25p80 device
* Various small adjustments on intructions and models
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmNX/WEACgkQUaNDx8/7
# 7KFhERAAhrcLcv15ny8RwatHPjzU00ZPQ0PcxGj1VDT66pCVh6M+rIeRPB2scOey
# Pu8jUvIYJ8w7ozjAP6YTQ1MP/WufniVi91Bx+vs/okSiWZa4dP0/G7NQWoc1at0s
# NBlkg57l1GMEeQb5x8vC1DizTQ1Z8Q8J/Ur3uXukXCmYVJAwHYpl/Foob1IPFgh8
# UcJ55LyuRq99lS8ib6HvRftAsC3DOcA/sl3b/TYR2+iKyi1VS2aZoQzxVCavSBcz
# PoTonT9O4OvIQthAgXRwpylW/aMYU3I7FeyOMKlCNLbmJ8LpVbX2v0KN3WBvWBv4
# OWP0DiqPUuoWFHLUGKbiVOgWQrTQXZyoD70SD/ObE1oMTLmeBoD1oFizQDvokHAR
# g2+gMdWnuWcbyaofY7YwuI6qz22gbrgh8JqX6sEWRDnY7HgCUvPhCsmci+bdN5cf
# dGcE8YKi7aD5gzoU9LRziPlhbwaEsgYLpYS7aGfNcmypgeq6lmNG7xKyw911zCTY
# uqDZWOUJy0tUIUTxoz3o1/KtsTFugjuZ+9W1SxELptJR37iwlP1vumf6bduwcx/3
# ba8tzNoXecXO5Icmq5P3lMNVM/abpkDDKS66HA87mABLEd/eCD0ojR9Kfxo0mD74
# kmQK3MFfJPkTu0ddu1cWhCIgTO7EuLuZL7gzj1oxoeXiU3YcVh8=
# =u7pS
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Oct 2022 11:14:41 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu:
arm/aspeed: Replace mx25l25635e chip model
m25p80: Add the w25q01jvq SFPD table
m25p80: Add the w25q512jv SFPD table
m25p80: Add the w25q256 SFPD table
m25p80: Add the mx66l1g45g SFDP table
m25p80: Add the mx25l25635f SFPD table
m25p80: Add the mx25l25635e SFPD table
m25p80: Add erase size for mx25l25635e
m25p80: Add the n25q256a SFDP table
m25p80: Add basic support for the SFDP command
hw/arm/aspeed: increase Bletchley memory size
ast2600: Drop NEON from the CPU features
aspeed/smc: Cache AspeedSMCClass
ssi: cache SSIPeripheralClass to avoid GET_CLASS()
tests/avocado/machine_aspeed.py: Fix typos on buildroot
hw/i2c/aspeed: Fix old reg slave receive
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Viktor Prutyanov [Wed, 19 Oct 2022 23:59:48 +0000 (02:59 +0300)]
dump/win_dump: limit number of processed PRCBs
When number of CPUs utilized by guest Windows is less than defined in
QEMU (i.e., desktop versions of Windows severely limits number of CPU
sockets), patch_and_save_context routine accesses non-existent PRCB and
fails. So, limit number of processed PRCBs by NumberProcessors taken
from guest Windows driver.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221019235948.656411-1-viktor.prutyanov@redhat.com>
Janosch Frank [Mon, 17 Oct 2022 08:38:22 +0000 (08:38 +0000)]
s390x: pv: Add dump support
Sometimes dumping a guest from the outside is the only way to get the
data that is needed. This can be the case if a dumping mechanism like
KDUMP hasn't been configured or data needs to be fetched at a specific
point. Dumping a protected guest from the outside without help from
fw/hw doesn't yield sufficient data to be useful. Hence we now
introduce PV dump support.
The PV dump support works by integrating the firmware into the dump
process. New Ultravisor calls are used to initiate the dump process,
dump cpu data, dump memory state and lastly complete the dump process.
The UV calls are exposed by KVM via the new KVM_PV_DUMP command and
its subcommands. The guest's data is fully encrypted and can only be
decrypted by the entity that owns the customer communication key for
the dumped guest. Also dumping needs to be allowed via a flag in the
SE header.
On the QEMU side of things we store the PV dump data in the newly
introduced architecture ELF sections (storage state and completion
data) and the cpu notes (for cpu dump data).
Users can use the zgetdump tool to convert the encrypted QEMU dump to an
unencrypted one.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Message-Id: <20221017083822.43118-11-frankja@linux.ibm.com>
Janosch Frank [Mon, 17 Oct 2022 08:38:20 +0000 (08:38 +0000)]
include/elf.h: add s390x note types
Adding two s390x note types
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221017083822.43118-9-frankja@linux.ibm.com>
Add a tcg_ops hook to replace the restore_state_to_opc
function call. Because these generic hooks cannot depend
on target-specific types, temporarily, copy the current
target_ulong data[] into uint64_t d64[].
Reviewed-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the only user, Arm MTE, always requires allocation,
merge the get and alloc functions to always produce a
non-null result. Also assume that the user has already
checked page validity.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Call tb_invalidate_phys_page for PAGE_RESET
When PAGE_RESET is set, we are replacing pages with new
content, which means that we need to invalidate existing
cached data, such as TranslationBlocks. Perform the
reset invalidate while we're doing other invalidates,
which allows us to remove the separate invalidates from
the user-only mmap/munmap/mprotect routines.
In addition, restrict invalidation to PAGE_EXEC pages.
Since cdf713085131, we have validated PAGE_EXEC is present
before translation, which means we can assume that if the
bit is not present, there are no translations to invalidate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Remove duplicate store to tb->page_addr[]
When we added the fast path, we initialized page_addr[] early.
These stores in and around tb_page_add() are redundant; remove them.
Fixes: 50627f1b7b1 ("accel/tcg: Add fast path for translator_ld*") Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Drop cpu_get_tb_cpu_state from TARGET_HAS_PRECISE_SMC
The results of the calls to cpu_get_tb_cpu_state,
current_{pc,cs_base,flags}, are not used.
In tb_invalidate_phys_page, use bool for current_tb_modified.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Make page_alloc_target_data allocation constant
Use a constant target data allocation size for all pages.
This will be necessary to reduce overhead of page tracking.
Since TARGET_PAGE_DATA_SIZE is now required, we can use this
to omit data tracking for targets that don't require it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change from QEMU_BUILD_BUG_ON, which requires ifdefs to avoid
problematic code, to qemu_build_assert, which can use C ifs.
Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This differs from assert, in that with optimization enabled it
triggers at build-time. It differs from QEMU_BUILD_BUG_ON,
aka _Static_assert, in that it is sensitive to control flow
and is subject to dead-code elimination.
Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Leandro Lupori [Tue, 25 Oct 2022 20:24:22 +0000 (17:24 -0300)]
accel/tcg: Add a quicker check for breakpoints
Profiling QEMU during Fedora 35 for PPC64 boot revealed that a
considerable amount of time was being spent in
check_for_breakpoints() (0.61% of total time on PPC64 and 2.19% on
amd64), even though it was just checking that its queue was empty
and returning, when no breakpoints were set. It turns out this
function is not inlined by the compiler and it's always called by
helper_lookup_tb_ptr(), one of the most called functions.
By leaving only the check for empty queue in
check_for_breakpoints() and moving the remaining code to
check_for_breakpoints_slow(), called only when the queue is not
empty, it's possible to avoid the call overhead. An improvement of
about 3% in total time was measured on POWER9.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221025202424.195984-2-leandro.lupori@eldorado.org.br> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* tag 'linux-user-for-7.2-pull-request' of https://gitlab.com/laurent_vivier/qemu:
linux-user: Add guest memory layout to exception dump
linux-user: Implement faccessat2
linux-user: remove conditionals for many fs.h ioctls
linux-user: add more compat ioctl definitions
linux-user: don't use AT_EXECFD in do_openat()
linux-user: handle /proc/self/exe with execve() syscall
linux-user: fix pidfd_send_signal()
linux-user: Fix more MIPS n32 syscall ABI issues
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Qi Hu [Mon, 17 Oct 2022 02:08:26 +0000 (10:08 +0800)]
tcg/aarch64: Remove unused code in tcg_out_op
AArch64 defines the TCG_TARGET_HAS_direct_jump. So the "else" block is
useless in the case of "INDEX_op_goto_tb" in function "tcg_out_op". Add
an assertion and delete these codes for clarity.
Suggested-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Qi Hu <huqi@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221017020826.990729-1-huqi@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Qi Hu [Sat, 15 Oct 2022 09:27:54 +0000 (17:27 +0800)]
tcg/loongarch64: Add direct jump support
Similar to the ARM64, LoongArch has PC-relative instructions such as
PCADDU18I. These instructions can be used to support direct jump for
LoongArch. Additionally, if instruction "B offset" can cover the target
address(target is within ±128MB range), a single "B offset" plus a nop
will be used by "tb_target_set_jump_target".
Signed-off-by: Qi Hu <huqi@loongson.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: WANG Xuerui <git@xen0n.name>
Message-Id: <20221015092754.91971-1-huqi@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Fri, 21 Oct 2022 16:34:09 +0000 (17:34 +0100)]
Revert "accel/tcg: Init TCG cflags in vCPU thread handler"
Commit a82fd5a4ec24d was intended to be a code cleanup, but
unfortunately it has a bug. It moves the initialization of the
TCG cflags from the "start a new vcpu" function to the
thread handler; this is fine when each vcpu has its own thread,
but when we are doing round-robin of vcpus on a single thread
we end up only initializing the cflags for CPU 0, not for any
of the others.
The most obvious effect of this bug is that running in icount
mode with more than one CPU is broken; typically the guest
hangs shortly after it brings up the secondary CPUs.
Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221021163409.3674911-1-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Helge Deller [Mon, 24 Oct 2022 20:18:09 +0000 (22:18 +0200)]
linux-user: Add guest memory layout to exception dump
When the emulation stops with a hard exception it's very useful for
debugging purposes to dump the current guest memory layout (for an
example see /proc/self/maps) beside the CPU registers.
The open_self_maps() function provides such a memory dump, but since
it's located in the syscall.c file, various changes (add #includes, make
this function externally visible, ...) are needed to be able to call it
from the existing EXCP_DUMP() macro.
This patch takes another approach by re-defining EXCP_DUMP() to call
target_exception_dump(), which is in syscall.c, consolidates the log
print functions and allows to add the call to dump the memory layout.
Beside a reduced code footprint, this approach keeps the changes across
the various callers minimal, and keeps EXCP_DUMP() highlighted as
important macro/function.
Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <Y1bzAWbw07WBKPxw@p100>
[lv: remove pc declaration and setting] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Janosch Frank [Mon, 17 Oct 2022 08:38:16 +0000 (08:38 +0000)]
dump: Reintroduce memory_offset and section_offset
section_offset will later be used to store the offset to the section
data which will be stored last. For now memory_offset is only needed
to make section_offset look nicer.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017083822.43118-5-frankja@linux.ibm.com>
Janosch Frank [Mon, 17 Oct 2022 08:38:14 +0000 (08:38 +0000)]
dump: Write ELF section headers right after ELF header
Let's start bundling the writes of the headers and of the data so we
have a clear ordering between them. Since the ELF header uses offsets
to the headers we can freely order them.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017083822.43118-3-frankja@linux.ibm.com>
Janosch Frank [Mon, 17 Oct 2022 08:38:13 +0000 (08:38 +0000)]
dump: Use a buffer for ELF section data and headers
Currently we're writing the NULL section header if we overflow the
physical header number in the ELF header. But in the future we'll add
custom section headers AND section data.
To facilitate this we need to rearange section handling a bit. As with
the other ELF headers we split the code into a prepare and a write
step.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017083822.43118-2-frankja@linux.ibm.com>
Stefan Hajnoczi [Mon, 24 Oct 2022 18:27:12 +0000 (14:27 -0400)]
Merge tag 'pull-9p-20221024' of https://github.com/cschoenebeck/qemu into staging
9pfs: performance, Windows host prep, tests restructure
* Highlight of this PR is Linus Heckemann's GHashTable patch which
brings massive general performance improvements of 9p server
somewhere between factor 6 .. 12.
* Bin Meng's g_mkdir patch is a preparatory patch for upcoming
Windows host support of 9p server.
* The rest of the patches in this PR are 9p test code restructuring
and refactoring changes to improve readability and to ease
maintenance of 9p test code on the long-term.
# -----BEGIN PGP SIGNATURE-----
#
# iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmNWbs8XHHFlbXVfb3Nz
# QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5V4cw/8CqoSJqoJixlP8kAGDYWq3CgF
# SKd09rIzLSWyyufAoZr1TqLwRrvEQRlZJSpL4fGvRpQLv0IQCu4x59ohHRob25Tm
# Fe7IxYBNuBwLW4yu+Y7FaujeGoYAi9Qw5q4ijq3/aSSiIeuXySKB2JmW71CQ+Tbe
# uwivsnMtWzQ7qsNwrtXYbxDs7UGkdsiW2sEQUS26GMApAXZoB+38hwtTW2Y9MOrC
# 58JuZza/fUVPzo0V1D0ggRawb5O2VTF5fz8aGFG4FvoyIW6DDZFSfnyre9QxivOl
# 5McWwSQ/D04vdEK9ornGPYr9YRGuP8g07p1EW9OfKeie4I41e9pS3UminK5lVCgo
# SfBHzz96efM5XR+Wnl4yVKowivmTqjwUU8lDqW2eB/7YBRuYUzrpxYe//UPv4q1J
# zaQV3pgwFAVkVJCnkcLCa1JQbH581bXSsuRlDdYqoRYfyzXoxbywNjvn9BXE0PrG
# WRecS//GyN3GVZYxMwb3H052110pYsYIg2YZ2H4QiqCwpEHHvy+L/ZXm19vbDm7B
# GYJQPUK8/y0NGwZsUYcUSx1TWlU9ZPwrbqZfv7e7+B6FL4VNjdaqb8PvS9admWSq
# LOSzrVVIus+nb7tP99d1Fb6oRyCy3x8E48gTr5UtTJHC4SAw/OBJmem6GOc/D490
# H7Dq8Y27qsQ6fT7iPm8=
# =MxSG
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Oct 2022 06:54:07 EDT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20221024' of https://github.com/cschoenebeck/qemu: (23 commits)
tests/9p: remove unnecessary g_strdup() calls
tests/9p: merge v9fs_tunlinkat() and do_unlinkat()
tests/9p: merge v9fs_tlink() and do_hardlink()
tests/9p: merge v9fs_tsymlink() and do_symlink()
tests/9p: merge v9fs_tlcreate() and do_lcreate()
tests/9p: merge v9fs_tmkdir() and do_mkdir()
tests/9p: convert v9fs_tflush() to declarative arguments
tests/9p: simplify callers of twrite()
tests/9p: convert v9fs_twrite() to declarative arguments
tests/9p: simplify callers of tlopen()
tests/9p: convert v9fs_tlopen() to declarative arguments
tests/9p: simplify callers of treaddir()
tests/9p: convert v9fs_treaddir() to declarative arguments
tests/9p: simplify callers of tgetattr()
tests/9p: convert v9fs_tgetattr() to declarative arguments
tests/9p: simplify callers of tattach()
tests/9p: merge v9fs_tattach(), do_attach(), do_attach_rqid()
tests/9p: merge v9fs_tversion() and do_version()
tests/9p: simplify callers of twalk()
tests/9p: merge *walk*() functions
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386: implement FMA instructions
target/i386: implement F16C instructions
target/i386: introduce function to set rounding mode from FPCW or MXCSR bits
target/i386: decode-new: avoid out-of-bounds access to xmm_regs[-1]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tag 'm68k-for-7.2-pull-request' of https://github.com/vivier/qemu-m68k:
m68k: write bootinfo as rom section and re-randomize on reboot
m68k: rework BI_VIRT_RNG_SEED as BI_RNG_SEED
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Volker Rümelin [Sat, 22 Oct 2022 14:12:04 +0000 (16:12 +0200)]
ui: remove useless typecasts
Commit 8f9abdf586 ("chardev: src buffer const for write functions")
changed the type of the second parameter of qemu_chr_be_write()
from uint8_t * to const uint8_t *. Remove the now useless type
casts from qemu_chr_be_write() function calls in ui/console.c and
ui/gtk.c.
As with previous patches, unify functions v9fs_tversion() and do_version()
into a single function v9fs_tversion() by using a declarative function
arguments approach.
There are currently 4 different functions for sending a 9p 'Twalk'
request: v9fs_twalk(), do_walk(), do_walk_rqids() and
do_walk_expect_error(). They are all doing the same thing, just in a
slightly different way and with slightly different function arguments.
Merge those 4 functions into a single function by using a struct for
function call arguments and use designated initializers when calling
this function to turn usage into a declarative approach, which is
better readable and easier to maintain.
Also move private functions genfid(), split() and split_free() from
virtio-9p-test.c to virtio-9p-client.c.
Based-on: <E1odrya-0004Fv-97@lizzy.crudebyte.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <607969dbfbc63c1be008df9131133711b046e979.1664917004.git.qemu_oss@crudebyte.com>
Linus Heckemann [Tue, 4 Oct 2022 10:41:21 +0000 (12:41 +0200)]
9pfs: use GHashTable for fid table
The previous implementation would iterate over the fid table for
lookup operations, resulting in an operation with O(n) complexity on
the number of open files and poor cache locality -- for every open,
stat, read, write, etc operation.
This change uses a hashtable for this instead, significantly improving
the performance of the 9p filesystem. The runtime of NixOS's simple
installer test, which copies ~122k files totalling ~1.8GiB from 9p,
decreased by a factor of about 10.
Signed-off-by: Linus Heckemann <git@sphalerite.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Greg Kurz <groug@kaod.org>
[CS: - Retain BUG_ON(f->clunked) in get_fid().
- Add TODO comment in clunk_fid(). ]
Message-Id: <20221004104121.713689-1-git@sphalerite.org>
[CS: - Drop unnecessary goto and out: label. ] Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
tests/9p: split virtio-9p-test.c into tests and 9p client part
This patch is pure refactoring, it does not change behaviour.
virtio-9p-test.c grew to 1657 lines. Let's split this file up between
actual 9p test cases vs. 9p test client, to make it easier to
concentrate on the actual 9p tests.
Move the 9p test client code to a new unit virtio-9p-client.c, which
are basically all functions and types prefixed with v9fs_* already.
Note that some client wrapper functions (do_*) are preserved in
virtio-9p-test.c, simply because these wrapper functions are going to
be wiped with subsequent patches anyway.
As the global QGuestAllocator variable is moved to virtio-9p-client.c,
add a new function v9fs_set_allocator() to be used by virtio-9p-test.c
instead of fiddling with a global variable across units and libraries.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1odrya-0004Fv-97@lizzy.crudebyte.com>
Bin Meng [Tue, 27 Sep 2022 11:06:04 +0000 (19:06 +0800)]
fsdev/virtfs-proxy-helper: Use g_mkdir()
Use g_mkdir() to create a directory on all platforms.
Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20220927110632.1973965-27-bmeng.cn@gmail.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Cédric Le Goater [Mon, 24 Oct 2022 09:20:16 +0000 (11:20 +0200)]
arm/aspeed: Replace mx25l25635e chip model
A mx25l25635f chip model is generally found on these machines. It's
newer and uses 4B opcodes which is better to exercise the support in
the Linux kernel.
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220722063602.128144-9-clg@kaod.org>
Message-Id: <20221013161241.2805140-11-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Cédric Le Goater [Mon, 24 Oct 2022 09:20:16 +0000 (11:20 +0200)]
m25p80: Add the w25q512jv SFPD table
The SFDP table size is 0x100 bytes long. The mandatory table for basic
features is available at byte 0x80 and two extra Winbond specifics
table are available at 0xC0 and 0xF0.
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220722063602.128144-8-clg@kaod.org>
Message-Id: <20221013161241.2805140-9-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Cédric Le Goater [Mon, 24 Oct 2022 09:20:15 +0000 (11:20 +0200)]
m25p80: Add the mx25l25635f SFPD table
The mx25l25635e and mx25l25635f chips have the same JEDEC id but the
mx25l25635f has more capabilities reported in the SFDP table. Support
for 4B opcodes is of interest because it is exploited by the Linux
kernel.
The SFDP table size is 0x200 bytes long. The mandatory table for basic
features is available at byte 0x30 and an extra Macronix specific
table is available at 0x60.
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220722063602.128144-5-clg@kaod.org>
Message-Id: <20221013161241.2805140-6-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
projects / mirror_qemu.git / log