Arnd Bergmann [Thu, 4 Oct 2018 14:41:12 +0000 (16:41 +0200)]
Merge tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Nodes for the newly support rk3188 display controller, a fix for a new
dtc warning, gpio setting for the sdmmc regulator on radxarock and a
new board the "S" variant of the rk3288-based Tinker board, that sports
an added emmc.
* tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add rk3288-based Tinker board S
ARM: dts: rockchip: move shared tinker-board nodes to a common dtsi
ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock
ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036
ARM: dts: rockchip: add rk3188 lcd controller nodes
Arnd Bergmann [Thu, 4 Oct 2018 14:14:33 +0000 (16:14 +0200)]
Merge tag 'v4.20-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Some additional new boards, the rk3399-based RockPro64 from Pine64, as well
as the Vamrs Rock960. Another big feature is display support including hdmi
and the Innosilicon hdmiphy on the rk3328, right now enabled on the rock64.
The rock64 also got its spi-nor and spdif enabled. On the px30 we can see
dwc2-based usb support now and finally some misc fixes, like for a new dtc
warning, missing address and size cells and microSD fix on sapphire.
* tag 'v4.20-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: enable display nodes on rk3328-rock64
arm64: dts: rockchip: add rk3328 display nodes
arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
arm64: dts: rockchip: add missing address and size cells for rk3399 mipi dsi
arm64: dts: rockchip: Enable SPI NOR flash on Rock64
arm64: dts: rockchip: add initial dts support for Rockpro64
arm64: dts: rockchip: enable dwc2-based otg controller on px30-evb
arm64: dts: rockchip: add dwc2 otg controller on px30
dt-bindings: usb: dwc2: add description for px30
arm64: dts: rockchip: Enable SD card detection for Rock960 boards
arm64: dts: rockchip: Add support for Rock960 board
dt-bindings: arm: rockchip: Add binding for Rock960 board
arm64: dts: rockchip: Split out common nodes for Rock960 based boards
arm64: dts: rockchip: add spdif sound node for rock64
arm64: dts: rockchip: Fix microSD in rk3399 sapphire board
arm64: dts: rockchip: Fix I2C bus unit-address error on rk3399-puma-haikou
Arnd Bergmann [Thu, 4 Oct 2018 14:13:04 +0000 (16:13 +0200)]
Merge tag 'omap-for-v4.20/dt-signed-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
More devicetree changes for omap variants
There's a patch for previously merged dts changes to remove the last
remaining use of legacy phy_id property.
For dra7, we have a non-urgent PCIe dts fix, enable a PCIe errata for
unaligned access.
For omap5, we enable omap5 USB OTG mode for DWC3 controller.
And we add support for am335x based Moxa UC-2100 series of industrial
computers.
* tag 'omap-for-v4.20/dt-signed-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x: Replace remaining legacy phy_id with phy-handle
ARM: dts: am335x: add support for Moxa UC-2101 open platform
ARM: dts: am335x: add common file for UC-2100 series
ARM: dts: omap5: enable OTG role for DWC3 controller
ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode
ARM: dts: dra7: Fix up unaligned access setting for PCIe EP
Tudor Ambarus [Tue, 2 Oct 2018 13:20:38 +0000 (16:20 +0300)]
ARM: dts: at91: sama5d4_xplained: even nand memory partitions
sama5d4_xplained, ssam9x5cm, sama5d2_ptc_ek and sama5d3_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our NAND flash map available at:
Tudor Ambarus [Tue, 2 Oct 2018 13:20:37 +0000 (16:20 +0300)]
ARM: dts: at91: sama5d3_xplained: even nand memory partitions
sama5d3_xplained, sam9x5cm, sama5d2_ptc_ek and sama5d4_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our nand flash map available at:
Tudor Ambarus [Tue, 2 Oct 2018 13:20:36 +0000 (16:20 +0300)]
ARM: dts: at91: at91sam9x5cm: even nand memory partitions
sam9x5cm, sama5d2_ptc_ek, sama5d3_xplained and sama5d4_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our nand flash map available at:
Arnd Bergmann [Tue, 2 Oct 2018 10:03:40 +0000 (12:03 +0200)]
Merge tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Devicetree changes for omap variants
This branch contains a series of improvments for omap3-gta04 phone,
and a series of clean-up for am335x to remove the deprecated phy_id
property.
The rest is to configure am57xx-idk boards for leds, load trigger,
and smps, am3517-evm audio configuration, beaglebone hdmi cec support,
coresight binding update, and fixes for i2c and spi warnings.
* tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (70 commits)
ARM: dts: add omap3-gta04a5one to Makefile
ARM: dts: omap3-gta04: add pulldown/up settings for twl4030 gpio
ARM: dts: am335x-boneblack: add cec support
ARM: dts: am3517-evm: Add support for UI board and Audio
ARM: dts: gta04: add serial console wakeup irq
ARM: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supply
ARM: dts: omap: Update coresight bindings for hardware ports
ARM: dts: ti: Fix SPI and I2C bus warnings
ARM: dts: dra62x-j5eco-evm: get rid of phy_id property
ARM: dts: dm8148-t410: get rid of phy_id property
ARM: dts: dm8148-evm: get rid of phy_id property
ARM: dts: am57xx-cl-som-am57x: get rid of phy_id property
ARM: dts: am57xx-idk-common: get rid of phy_id property
ARM: dts: dra7-evm: get rid of phy_id property
ARM: dts: dra71-evm: get rid of phy_id property
ARM: dts: dra72-evm-revc: get rid of phy_id property
ARM: dts: dra72-evm: get rid of phy_id property
ARM: dts: dra76-evm: get rid of phy_id property
ARM: dts: am437x-cm-t43: get rid of phy_id property
ARM: dts: am437x-gp-evm: get rid of phy_id property
...
Arnd Bergmann [Tue, 2 Oct 2018 09:47:21 +0000 (11:47 +0200)]
Merge tag 'mvebu-dt64-4.20-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt64 for 4.20 (part 1)
- Add watchdog node on Armada 37xx
- Update PPv2 interrupts name
- Add support for the SolidRun Clearfog GT 8K (Aramda 8040 based)
- Add thermal-zone nodes for Aramda 7K/8K
* tag 'mvebu-dt64-4.20-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-37xx: add nodes to support watchdog
arm64: dts: marvell: armada-cp110: describe more PPv2 interrupts
arm64: dts: marvell: armada-cp110: change the PPv2 IRQ names
arm64: dts: add support for SolidRun Clearfog GT 8K
arm64: dts: marvell: add thermal-zone node in cp110 DTSI file
arm64: dts: marvell: add macro to make distinction between node names
arm64: dts: marvell: add thermal-zone node in ap806 DTSI file
arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon
Arnd Bergmann [Tue, 2 Oct 2018 09:41:43 +0000 (11:41 +0200)]
Merge tag 'imx-dt64-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Freescale arm64 device tree update for 4.20:
- Add the second Dual UART device for LS208xA SoCs.
- Add necessary big-endian property for NOR device on LS104xA based
boards, remove unneeded big-endian property from IFC controller.
- DTC has new checks for I2C and SPI buses to land into 4.20. A patch
from Rob to fix the bus node names and warnings in unit-addresses.
* tag 'imx-dt64-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: fsl: Fix I2C and SPI bus warnings
arm64: dts: ls208xa: add second duart
arm64: dts: fsl: remove big-endian field from IFC controller
arm64: dts: Add big-endian in nor node for ls104xa
Arnd Bergmann [Tue, 2 Oct 2018 09:36:53 +0000 (11:36 +0200)]
Merge tag 'imx-dt-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree update for 4.20:
- New board support: Engicam's i.Core MX6 CPU module v1.5; ConnectCore
6UL Single Board Computer (SBC) Pro; i.MX6 ULZ based EVK board.
- Add Add SFF interface support for vf610-zii board.
- Disable unneeded devices like VPU and internal watchdog for imx51-zii
boards.
- Add 'no-sdio' and 'no-sd' property for vf610-zii-cfu1 board.
- Improve i.MX6 SLL GPIO support by adding gpio-ranges property and
clocks information.
- Update iomux header for i.MX7 Solo and i.MX6 ULL.
- Enable GPIO buttons as wakeup source for imx7d-sdb and imx6sx-sdb.
- Add GPIO keys and egalax touch screen support for imx6qdl-sabreauto.
- Switch to use SPDX-License-Identifier for more boards - vf610-twr,
imx7s-warp, Engicam boards.
- Add device tree bindings of 'fsl,pmic-stby-poweroff' property and add
the support for i.MX6 RIoTboard.
- DTC has new checks for SPI buses which will be landed on 4.20.
A patch from Rob to fix those 100+ warnings on i.MX boards. (Thanks!)
- Switch i.MX7 device tree to use updated coresight binding for
hardware ports.
- Misc small or random update and cleanup.
* tag 'imx-dt-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits)
ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support
dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
ARM: dts: imx53-ppd: Remove 'num-chipselects' property
ARM: dts: vf610-twr: Switch to SPDX identifier
ARM: dts: vf: Switch to SPDX identifier
ARM: dts: imx6qdl-zii-rdu2: Disable the internal RTC
ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string
ARM: dts: imx6ul: use nvmem-cells for cpu speed grading
ARM: dts: imx: Fix SPI bus warnings
ARM: dts: imx7: Update coresight binding for hardware ports
ARM: dts: vf610-zii-cfu1: Pass the 'no-sd' property
ARM: dts: vf610-zii-cfu1: Pass the 'no-sdio' property
ARM: dts: imx51-zii-scu2-mezz: Disable the internal watchdog
ARM: dts: imx51-zii-scu2-mezz: Disable VPU
ARM: dts: imx51-zii-scu3-esb: Disable VPU
ARM: dts: imx51: Add label for VPU node
ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point
ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro
ARM: dts: imx6: RIoTboard provide standby on power off option
dt-bindings: imx6q-clock: add new fsl,pmic-stby-poweroff property
...
Arnd Bergmann [Tue, 2 Oct 2018 09:32:10 +0000 (11:32 +0200)]
Merge tag 'qcom-dts-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm Device Tree Changes for v4.20
* Fix IRQ constants usage on MSM8974
* Add led, gpio-button, sdcc, and pcie nodes for IPQ8064
* Move/cleanup common nodes for IPQ8064
* Add i2c sensor nodes for MSM8974 Hammerhead
* Fixes for SAW, kpss, opp, pci range, and space/tab on IPQ4019
* Update coresight bindings
* tag 'qcom-dts-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: qcom: Update coresight bindings for hardware ports
ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
ARM: dts: qcom: ipq4019: fix space vs tab indenting inside qcom-ipq4019.dtsi
ARM: dts: qcom: ipq4019: fix PCI range
ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value
ARM: dts: qcom: ipq4019: add cpu operating points for cpufreq support
ARM: dts: qcom: ipq4019: use v2 of the kpss bringup mechanism
ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity
ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
ARM: dts: qcom: Add led and gpio-button nodes to ipq8064 boards
ARM: dts: qcom: Move common nodes to ipq8064-v.1.0.dtsi
ARM: dts: qcom: Add sdcc nodes for ipq8064
ARM: dts: qcom: Add pcie nodes for ipq8064
ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
ARM: dts: qcom-msm8974: use named constant for interrupt flag NONE
ARM: dts: qcom-msm8974: use named constant for interrupt flag LEVEL HIGH
ARM: dts: qcom-msm8974: use named constant for interrupt flag EDGE RISING
ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_SPI
ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_PPI
Arnd Bergmann [Tue, 2 Oct 2018 09:21:52 +0000 (11:21 +0200)]
Merge tag 'qcom-arm64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.20
* Update Coresight for MSM8916
* Switch to use mailbox for smp2p and smd on MSM8996
* Add dispcc, dsp, USB, regulator, and other nodes for SDM845
* Drop model/compatible from MSM8916 and MSM8996
* Add compat for db820c
* Add MSM8998 SoC and board support along with associated nodes
* Add RESIN/PON for Qualcomm PM8916 and PM8994
* tag 'qcom-arm64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (31 commits)
Revert "dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'"
Revert "dt-bindings: iio: vadc: Fix documentation of 'reg'"
arm64: dts: msm8916: Update coresight bindings for hardware ports
arm64: dts: msm8996: Transition smp2p and smd to mailbox
arm64: dts: qcom: pm8998: Add pm8998 thermal zone
arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'
arm64: dts: sdm845: Add dispcc node
arm64: dts: qcom: sdm845: Add adsp, cdsp and slpi smp2p
arm64: dts: qcom: sdm845-mtp: Add nodes for USB
arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
arm64: dts: qcom: sdm845: Add USB-related nodes
arm64: dts: qcom: Add AOSS reset driver node for SDM845
arm64: dts: msm8996: Drop model
arm64: dts: msm8916: Drop model and compatible
arm64: dts: db820c: Add qcom,apq8096 to compatible string
arm64: dts: qcom: Populate pm8998 with additional nodes
arm64: dts: qcom: msm8998: Add smp2p nodes
arm64: dts: qcom: msm8998: Add the qfprom node
arm64: dts: qcom: msm8998: Add firmware node
...
Arnd Bergmann [Tue, 2 Oct 2018 09:16:16 +0000 (11:16 +0200)]
Merge tag 'actions-arm-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt
Actions Semi arm based SoC DT for v4.20
This updates SPDX headers for remaining files.
* tag 'actions-arm-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: dts: owl: Convert to new-style SPDX license identifiers
Arnd Bergmann [Tue, 2 Oct 2018 08:25:41 +0000 (10:25 +0200)]
Merge tag 'sunxi-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.20
Our usual bunch of DT patches for the Allwinner arm32 SoCs.
The most notable changes are:
- Support for the video decoding / encoding engine on the
A10s/A13/A20/A33
- IR support for the A83t
- SATA support for the R40
* tag 'sunxi-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun9i: Fix I2C bus warnings
ARM: dts: sunxi: Fix I2C bus warnings
ARM: dts: sun8i-a33: Add Video Engine and reserved memory nodes
ARM: dts: sun7i-a20: Add Video Engine and reserved memory nodes
ARM: dts: sun5i: Add Video Engine and reserved memory nodes
ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI
ARM: dts: sun8i: r40: add sata node
ARM: dts: sunxi: Don't use cd-inverted in sun8i-r40-bananapi-m2-ultra
ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller
ARM: dts: sun8i: a83t: Add support for the cir interface
ARM: dts: sun8i: a83t: Add the cir pin for the A83T
Arnd Bergmann [Tue, 2 Oct 2018 08:19:31 +0000 (10:19 +0200)]
Merge tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner H3 and H5 DT additions for 4.20
This is our usual H3/H5 pull request
The most notable changes are:
- the video decoding / encoding unit is finally enabled on the H3
- Mali support for the H5
- New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support
* tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees
ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodes
arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus
ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHY
ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block
arm64: dts: allwinner: h5: Add device node for Mali-450 GPU
ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support
nvmem: sunxi-sid: add support for H5's SID controller
ARM: dts: qcom: Update coresight bindings for hardware ports
Switch to the new hardware port bindings for coresight
Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
arm64: dts: actions: s900-bubblegum-96: Enable I2C1 and I2C2
Add pinctrl definitions for Actions Semiconductor S900 I2C controllers.
Pinctrl definitions are only available for I2C0, I2C1, and I2C2.
Enable I2C1 and I2C2 exposed on the low speed expansion connector in
Bubblegum-96 board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Squashed] Signed-off-by: Andreas Färber <afaerber@suse.de>
ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees
Bananapi released an updated revision of the H3/H5 based Bananapi M2+.
Version 1.2 enables voltage control for the CPU's regulator by using
a GPIO line to toggle a MOSFET that can change the effective resistance
value in the regulator's feedback network.
This patch adds a common .dtsi file for this new revision, which
includes the original common sunxi-bananapi-m2-plus.dtsi file, and
adds the GPIO-controlled regulator and a cpu-supply reference. H3
and H5 variant dts files are added as well.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodes
This adds nodes for the Video Engine and the associated reserved memory
for the H3. Up to 96 MiB of memory are dedicated to the CMA pool.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Chen-Yu Tsai [Thu, 30 Aug 2018 08:09:25 +0000 (16:09 +0800)]
ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus
Three more variants of the Bananapi M2 Plus have been introduced. One
with the H5 instead of the H3, another with the H2+ instead, and the
last with the H3 but with WiFi and eMMC removed.
All these variants use the same board. This patch splits out the
non-SoC-specific parts of the device tree, so that they can be shared
among all the variants. The original Bananapi M2 Plus has been renamed
to Bananapi M2 Plus H3.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The external RTL8211E RGMII Ethernet PHY is configured via external
resistors to use the address 0x1. The 0x0 address is a broadcast address
for this family of PHYs, and should not be used explicitly.
Chen-Yu Tsai [Fri, 24 Aug 2018 05:38:49 +0000 (13:38 +0800)]
arm64: dts: allwinner: h5: Add device node for Mali-450 GPU
The H5 has a Mali-450 GPU with 4 Pixel Processor cores.
Interestingly, while the datasheet lists an interrupt line for the GPU's
PMU, the hardware block itself doesn't seem to have it. Reads from the
PMU address range all return zero, and writes are ignored.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Diego Rondini [Fri, 3 Aug 2018 07:56:25 +0000 (09:56 +0200)]
ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support
Orangepi Zero Plus 2 is an open-source single-board computer, available in two
Allwinner SOC variants, H3 and H5. We add support for H3 variant here, as the
H5 is already supported by sun50i-h5-orangepi-zero-plus2.dts.
H3 Orangepi Zero Plus 2 has:
- Quad-core Cortex-A7
- 512MB DDR3
- microSD slot and 8GB eMMC
- Debug TTL UART
- HDMI
- Wifi + BT
- OTG + power supply
Signed-off-by: Diego Rondini <diego.rondini@kynetics.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
nvmem: sunxi-sid: add support for H5's SID controller
The H5 SoC have a SID controller that looks like the one in A64, the
cells are in the same offset but doesn't contain the same data (thermal
sensor calibration for example).
Add a binding for it.
Signed-off-by: Emmanuel Vadot <manu@freebsd.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
ARM: dts: am335x: add common file for UC-2100 series
The UC-2100 series consists many boards with different peripheral
devices and wireless modules, hence we fetch common items and
create a common dtsi file to increase reusability. All boards in
UC-2100 series will include this common dtsi file.
Signed-off-by: Wes Huang (黃淵河) <wes.huang@moxa.com> Signed-off-by: Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: omap5: enable OTG role for DWC3 controller
Since SMPS10 and OTG cable detection extcon are described here, and
work to enable OTG power when an OTG cable is plugged in, we can
define OTG mode in the controller (which is disabled by default in
omap5.dtsi).
Tested on OMAP5EVM and Pyra.
Suggested-by: Roger Quadros <rogerq@ti.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Vignesh R [Tue, 25 Sep 2018 05:21:51 +0000 (10:51 +0530)]
ARM: dts: dra7: Fix up unaligned access setting for PCIe EP
Bit positions of PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE and
PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE in CTRL_CORE_SMA_SW_7 are
incorrectly documented in the TRM. In fact, the bit positions are
swapped. Update the DT bindings for PCIe EP to reflect the same.
Fixes: d23f3839fe97 ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") Cc: stable@vger.kernel.org Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Merge tag 'renesas-arm-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.20
* RZ/G1M (r8a7743) based iWave G20D-Q7 board and camera daughter board
- Move PCIe node out of common dtsi to allow reuse of the common dtsi
on the iWave RZ/G1N board
* RZ/G1C (r8a77470) SoC: Add I2C4, SDHI2 and SMP support
* R-Car Gen1 based boards and R-Car Gen2 SoCs:
- Enhance top-of-file comments to include SoC name
* RZ/N1D (r9a06g032) SoC:
- Correct UART0 description and add all other UARTs
* tag 'renesas-arm-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: iwg20d-q7-common: Move pciec node out of common dtsi
ARM: dts: r8a77470: Add I2C4 support
ARM: dts: r8a77470: Add SDHI2 support
ARM: dts: r8a77470: Add SMP support
ARM: dts: R-Car Gen1 board comment update
ARM: dts: Include R-Car Gen2 product name in DTSI files
ARM: dts: r9a06g032: Correct UART and add all other UARTs
Merge tag 'renesas-arm64-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM64 Based SoC DT Updates for v4.20
* Remove unneeded status from thermal nodes
* R-Car Gen 3 SoCs:
- Use 400kHz for I2C DVFS bus
- Revise USB2.0 properties
* R-Car Gen 3 SoC based ULCB boards: Add default bootargs
* R-Car M3-N (r8a77965) SoC based boards: Enable audio with DMA
* R-Car V3M (r8a77970 and V3H (r8a77980) SoCs:
- Add compare match timer (CMT) support
- Add timer pulse unit (TPU) support
* R-Car V3H (r8a77980) and E3 (r8a77990) SoCs:
- Attach the SYS-DMAC to the IPMMU
* E3 (r8a77990) SoC: Add display output support
* R-Car E3 (r8a77990) based Ebisu board:
- Enable HDMI and CVBS input, and VGA and HDMI display output
* R-Car D3 (r8a77995) SoC: Add LVDS support
* R-Car D3 (r8a77995) based Draak board: Enable HDMI display output
* tag 'renesas-arm64-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77965: Add Sound and Audio DMAC device nodes
arm64: dts: renesas: r8a77995: draak: Enable HDMI display output
arm64: dts: renesas: r8a77990: ebisu: Enable VGA and HDMI outputs
arm64: dts: renesas: r8a77995: Add LVDS support
arm64: dts: renesas: r8a77990: Add display output support
arm64: dts: renesas: r8a779{7|8}0: add TPU support
arm64: dts: renesas: revise properties for R-Car Gen3 SoCs' usb 2.0
arm64: dts: renesas: ulcb: add default bootargs
arm64: dts: renesas: r8a779{7|8}0: add CMT support
arm64: dts: renesas: gen3: use 400kHz for I2C DVFS bus
arm64: dts: renesas: r8a77980: Attach the SYS-DMAC to the IPMMU
arm64: dts: renesas: r8a77990: Attach the SYS-DMAC to the IPMMU
arm64: dts: renesas: ebisu: Add HDMI and CVBS input
arm64: dts: renesas: Remove unneeded status from thermal nodes
Merge tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
arm64: tegra: Device tree changes for v4.20-rc1
This contains mostly device tree changes to support faster SDHCI modes
on Tegra210 and Tegra186.
* tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: I2C on Tegra194 is not compatible with Tegra114
arm64: dts: tegra186: Enable HS400
arm64: dts: tegra210: Enable HS400
arm64: dts: tegra186: Add SDMMC4 DQS trim value
arm64: dts: tegra210: Add SDMMC4 DQS trim value
arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
arm64: dts: tegra210: Assign clocks for sdmmc1 and sdmmc4
arm64: dts: tegra186: Add SDHCI tap and trim values
arm64: dts: tegra210: Add SDHCI tap and trim values
arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
Merge tag 'tegra-for-4.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
dt-bindings: Changes for v4.20-rc1
This contains the PMC pad configuration bindings which are used to
control the voltage of various pads found on Tegra chips. Among other
things this is required to enable faster modes on SDHCI.
* tag 'tegra-for-4.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Add Tegra PMC pad configuration bindings
Heiko Stuebner [Mon, 11 Dec 2017 01:02:01 +0000 (02:02 +0100)]
arm64: dts: rockchip: add rk3328 display nodes
Add the chain of display nodes from the core display-subsystem
through the one vop to the dw-hdmi output.
Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Robin Murphy <robin.murphy@arm.com>
changes in v3:
- drop reg from hdmi-in-port
changes in v2:
- remove trailing 0 from vop irq
Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic ARM64 DT updates for v4.20, round 2
- new SoC support: basic support for G12A family
- new board: Amlogic U200 board, using G12A SoC
- fix SPI bus warnings from new dtc updates
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support
dt-bindings: arm: amlogic: Add Meson G12A binding
arm64: dts: meson: Fix erroneous SPI bus warnings
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
ARM: dts: Amlogic updates for v4.20
- fix clock controller register sizes
- new board: Endless Mini (EC-100) by Endless Mobile
- add voltage regulators
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: odroidc1: add stdout-path property
ARM: dts: meson8b: odroidc1: enable the SAR ADC
ARM: dts: meson8b: odroidc1: add the fixed voltage regulators
ARM: dts: meson8b: odroidc1: add the CPU voltage regulator
ARM: dts: meson8b: Add support for the Endless Mini (EC-100)
ARM: dts: meson8b: add the RMII pins
ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins
dt-bindings: arm: amlogic: Add the Endless Mobile Endless Mini (EC-100)
dt-bindings: add vendor prefix for "Endless Mobile, Inc."
ARM: dts: meson8b: fix the clock controller register size
ARM: dts: meson8: fix the clock controller register size
Merge tag 'berlin64-dt-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin into next/dt
Berlin64 DT changes for v4.20
* tag 'berlin64-dt-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin:
arm64: dts: synaptics: add dtsi file for Synaptics AS370 SoC
dt-bindings: arm: syna: add support for the AS370 SoC
dt-bindings: arm: move berlin binding documentation to syna.txt
Rob Herring [Thu, 13 Sep 2018 18:12:40 +0000 (13:12 -0500)]
arm64: dts: amd: Fix SPI bus warnings
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
Cc: Brijesh Singh <brijeshkumar.singh@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Biju Das [Fri, 21 Sep 2018 14:07:55 +0000 (15:07 +0100)]
ARM: dts: iwg20d-q7-common: Move pciec node out of common dtsi
PCIe is not populated by default on iWave RZ/G1N board. RZ/G1N board
is almost identical to RZ/G1M. In order to reuse the common dtsi for
both the boards, it is required to move pcie node from common dtsi
to board specific dts.
Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay
The PHY found on the A64-OLinuXino requires a TX delay in order to
operate properly. Olimex uses a 600ps second delay in their BSP, and
that has been found to work, so let's use that value in the current
DT.
arm64: dts: msm8916: Update coresight bindings for hardware ports
Switch to updated coresight bindings for hw ports
Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Brian Masney [Tue, 25 Sep 2018 10:46:51 +0000 (06:46 -0400)]
ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
The following commits used IRQ_TYPE_NONE since that matched what was
already in the file and I do not have access to the datasheets for
these devices. After these patches were submitted, commit dcf145011400
("ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value")
changed all of these values to IRQ_TYPE_LEVEL_HIGH. This patch corrects
the IRQ type for these two commits:
commit bd9392507588 ("ARM: dts: qcom: msm8974-hammerhead: add device
tree bindings for ALS / proximity")
commit fe8d81fe7d9a ("ARM: dts: qcom: msm8974-hammerhead: add device
tree bindings for mpu6515")
Prior to these patches, I was having issues with the bmp280 sensor
returning temperature / pressure skipped errors, however these errors
have gone away with these patches.
Patches were tested on a LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>