Ingo Molnar [Sun, 17 May 2009 17:37:25 +0000 (19:37 +0200)]
perf_counter, x86: speed up the scheduling fast-path
We have to set up the LVT entry only at counter init time, not at
every switch-in time.
There's friction between NMI and non-NMI use here - we'll probably
remove the per counter configurability of it - but until then, dont
slow down things ...
Paul Mackerras [Mon, 18 May 2009 04:02:12 +0000 (14:02 +1000)]
perf_counter: powerpc: initialize cpuhw pointer before use
Commit 9e35ad38 ("perf_counter: Rework the perf counter
disable/enable") added code to the powerpc hw_perf_enable (renamed
from hw_perf_restore) to test cpuhw->disabled and return immediately
if it is not set (i.e. if the PMU is already enabled).
Unfortunately the test got added before cpuhw was initialized,
resulting in an oops the first time hw_perf_enable got called.
This fixes it by moving the initialization of cpuhw to before
cpuhw->disabled is tested.
[ Impact: fix oops-causing bug on powerpc ]
Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <18960.56772.869734.304631@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sun, 17 May 2009 08:04:45 +0000 (10:04 +0200)]
perf_counter, x86: fix zero irq_period counters
The quirk to irq_period unearthed an unrobustness we had in the
hw_counter initialization sequence: we left irq_period at 0, which
was then quirked up to 2 ... which then generated a _lot_ of
interrupts during 'perf stat' runs, slowed them down and skewed
the counter results in general.
Initialize irq_period to the maximum instead.
[ Impact: fix perf stat results ]
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sun, 17 May 2009 09:24:08 +0000 (11:24 +0200)]
perf_counter: fix threaded task exit
Flushing counters in __exit_signal() with irqs disabled is not
a good idea as perf_counter_exit_task() acquires mutexes. So
flush it before acquiring the tasklist lock.
(Note, we still need a fix for when the PID has been unhashed.)
[ Impact: fix crash with inherited counters ]
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Fri, 15 May 2009 18:45:59 +0000 (20:45 +0200)]
perf_counter: Fix inheritance cleanup code
Clean up code that open-coded the list_{add,del}_counter() code in
__perf_counter_exit_task() which consequently diverged. This could
lead to software counter crashes.
Also, fold the ctx->nr_counter inc/dec into those functions and clean
up some of the related code.
Linus Torvalds [Fri, 15 May 2009 23:47:55 +0000 (16:47 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI MSI: Fix MSI-X with NIU cards
PCI: Fix pci-e port driver slot_reset bad default return value
Linus Torvalds [Fri, 15 May 2009 20:22:11 +0000 (13:22 -0700)]
Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.
drm/i915: Set HDMI hot plug interrupt enable for only the output in question.
drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS.
drm/i915: Use the GM45 VGA hotplug workaround on G45 as well.
drm/i915: ignore LVDS on intel graphics systems that lie about having it
drm/i915: sanity check IER at wait_request time
drm/i915: workaround IGD i2c bus issue in kernel side (v2)
drm/i915: Don't allow binding objects into the last page of the aperture.
drm/i915: save/restore fence registers across suspend/resume
drm/i915: x86 always has writeq. Add I915_READ64 for symmetry.
Linus Torvalds [Fri, 15 May 2009 19:04:37 +0000 (12:04 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: Media rotation rate and form factor heuristics
libata: Report disk alignment and physical block size
sata_fsl: Fix the command description of FSL SATA controller
sata_fsl: Fix compile warnings
[libata] sata_sx4: fixup interrupt handling
[libata] sata_sx4: convert to new exception handling methods
* git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6:
iwlwifi: fix device id registration for 6000 series 2x2 devices
ath5k: update channel in sw state after stopping RX and TX
rtl8187: use DMA-aware buffers with usb_control_msg
mac80211: avoid NULL ptr deref when finding max_rates in PID and minstrel
airo: airo_get_encode{,ext} potential buffer overflow
Pulled directly by Linus because Davem is off playing shuffle-board at
some Alaskan cruise, and the NULL ptr deref issue hits people and should
get merged sooner rather than later.
David - make us proud on the shuffle-board tournament!
libata: Media rotation rate and form factor heuristics
This patch provides new heuristics for parsing both the form factor and
media rotation rate ATA IDENFITY words.
The reported ATA version must be 7 or greater and the device must return
values defined as valid in the standard. Only then are the
characteristics reported to SCSI via the VPD B1 page.
This seems like a reasonable compromise to me considering that we have
been shipping several kernel releases that key off the rotation rate bit
without any version checking whatsoever. With no complaints so far.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
libata: Report disk alignment and physical block size
For disks with 4KB sectors, report the correct block size and alignment
when filling out the READ CAPACITY(16) response.
This patch is based upon code from Matthew Wilcox' 4KB ATA tree. I
fixed the bug I reported a while back caused by ATA and SCSI using
different approaches to describing the alignment.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Dave Liu [Thu, 14 May 2009 14:47:07 +0000 (09:47 -0500)]
sata_fsl: Fix the command description of FSL SATA controller
The bit 11 of command description is reserved bit in Freescale
SATA controller and needs to be set to '1'. This is needed to
make sure the last write from the controller to the buffer
descriptor is seen before an interrupt is raised.
Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Kumar Gala [Thu, 14 May 2009 03:10:50 +0000 (22:10 -0500)]
sata_fsl: Fix compile warnings
We we build with dma_addr_t as a 64-bit quantity we get:
drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg':
drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t'
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Linus Torvalds [Fri, 15 May 2009 15:07:25 +0000 (08:07 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix race in ext4_inode_info.i_cached_extent
ext4: Clear the unwritten buffer_head flag after the extent is initialized
ext4: Use a fake block number for delayed new buffer_head
ext4: Fix sub-block zeroing for writes into preallocated extents
Linus Torvalds [Fri, 15 May 2009 15:06:45 +0000 (08:06 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb: gdb documentation fix
kgdb,i386: use address that SP register points to in the exception frame
sysrq, intel_fb: fix sysrq g collision
Linus Torvalds [Fri, 15 May 2009 15:05:37 +0000 (08:05 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
Revert "mm: add /proc controls for pdflush threads"
viocd: needs to depend on BLOCK
block: fix the bio_vec array index out-of-bounds test
Linus Torvalds [Fri, 15 May 2009 15:05:02 +0000 (08:05 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix PCI ROM access
powerpc/pseries: Really fix the oprofile CPU type on pseries
serial/nwpserial: Fix wrong register read address and add interrupt acknowledge.
powerpc/cell: Make ptcal more reliable
powerpc: Allow mem=x cmdline to work with 4G+
powerpc/mpic: Fix incorrect allocation of interrupt rev-map
powerpc: Fix oprofile sampling of marked events on POWER7
powerpc/iseries: Fix pci breakage due to bad dma_data initialization
powerpc: Fix mktree build error on Mac OS X host
powerpc/virtex: Fix duplicate level irq events.
powerpc/virtex: Add uImage to the default images list
powerpc/boot: add simpleImage.* to clean-files list
powerpc/8xx: Update defconfigs
powerpc/embedded6xx: Update defconfigs
powerpc/86xx: Update defconfigs
powerpc/85xx: Update defconfigs
powerpc/83xx: Update defconfigs
powerpc/fsl_soc: Remove mpc83xx_wdt_init, again
devpts_get_sb() calls memset(0) to clear mount options and calls
parse_mount_options() if user specified any mount options.
The memset(0) is bogus since the 'mode' and 'ptmxmode' options are
non-zero by default. parse_mount_options() restores options to default
anyway and can properly deal with NULL mount options.
So in devpts_get_sb() remove memset(0) and call parse_mount_options() even
for NULL mount options.
Bug reported by Eric Paris: http://lkml.org/lkml/2009/5/7/448.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Reported-by: Eric Paris <eparis@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Reviewed-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Mackerras [Thu, 14 May 2009 03:31:48 +0000 (13:31 +1000)]
perf_counter: powerpc: supply more precise information on counter overflow events
This uses values from the MMCRA, SIAR and SDAR registers on
powerpc to supply more precise information for overflow events,
including a data address when PERF_RECORD_ADDR is specified.
Since POWER6 uses different bit positions in MMCRA from earlier
processors, this converts the struct power_pmu limited_pmc5_6
field, which only had 0/1 values, into a flags field and
defines bit values for its previous use (PPMU_LIMITED_PMC5_6)
and a new flag (PPMU_ALT_SIPR) to indicate that the processor
uses the POWER6 bit positions rather than the earlier
positions. It also adds definitions in reg.h for the new and
old positions of the bit that indicates that the SIAR and SDAR
values come from the same instruction.
For the data address, the SDAR value is supplied if we are not
doing instruction sampling. In that case there is no guarantee
that the address given in the PERF_RECORD_ADDR subrecord will
correspond to the instruction whose address is given in the
PERF_RECORD_IP subrecord.
If instruction sampling is enabled (e.g. because this counter
is counting a marked instruction event), then we only supply
the SDAR value for the PERF_RECORD_ADDR subrecord if it
corresponds to the instruction whose address is in the
PERF_RECORD_IP subrecord. Otherwise we supply 0.
[ Impact: support more PMU hardware features on PowerPC ]
Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18955.37028.48861.555309@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Mackerras [Thu, 14 May 2009 11:48:08 +0000 (21:48 +1000)]
perf_counter: allow arch to supply event misc flags and instruction pointer
At present the values we put in overflow events for the misc
flags indicating processor mode and the instruction pointer are
obtained using the standard user_mode() and
instruction_pointer() functions. Those functions tell you where
the performance monitor interrupt was taken, which might not be
exactly where the counter overflow occurred, for example
because interrupts were disabled at the point where the
overflow occurred, or because the processor had many
instructions in flight and chose to complete some more
instructions beyond the one that caused the counter overflow.
Some architectures (e.g. powerpc) can supply more precise
information about where the counter overflow occurred and the
processor mode at that point. This introduces new functions,
perf_misc_flags() and perf_instruction_pointer(), which arch
code can override to provide more precise information if
available. They have default implementations which are
identical to the existing code.
This also adds a new misc flag value,
PERF_EVENT_MISC_HYPERVISOR, for the case where a counter
overflow occurred in the hypervisor. We encode the processor
mode in the 2 bits previously used to indicate user or kernel
mode; the values for user and kernel mode are unchanged and
hypervisor mode is indicated by both bits being set.
Paul Mackerras [Thu, 14 May 2009 03:29:14 +0000 (13:29 +1000)]
perf_counter: powerpc: use u64 for event codes internally
Although the perf_counter API allows 63-bit raw event codes,
internally in the powerpc back-end we had been using 32-bit
event codes. This expands them to 64 bits so that we can add
bits for specifying threshold start/stop events and instruction
sampling modes later.
This also corrects the return value of can_go_on_limited_pmc;
we were returning an event code rather than just a 0/1 value in
some circumstances. That didn't particularly matter while event
codes were 32-bit, but now that event codes are 64-bit it
might, so this fixes it.
[ Impact: extend PowerPC perfcounter interfaces from u32 to u64 ]
Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18955.36874.472452.353104@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Theodore Ts'o [Fri, 15 May 2009 13:07:28 +0000 (09:07 -0400)]
ext4: Fix race in ext4_inode_info.i_cached_extent
If two CPU's simultaneously call ext4_ext_get_blocks() at the same
time, there is nothing protecting the i_cached_extent structure from
being used and updated at the same time. This could potentially cause
the wrong location on disk to be read or written to, including
potentially causing the corruption of the block group descriptors
and/or inode table.
This bug has been in the ext4 code since almost the very beginning of
ext4's development. Fortunately once the data is stored in the page
cache cache, ext4_get_blocks() doesn't need to be called, so trying to
replicate this problem to the point where we could identify its root
cause was *extremely* difficult. Many thanks to Kevin Shanahan for
working over several months to be able to reproduce this easily so we
could finally nail down the cause of the corruption.
Jason Wessel [Thu, 12 Feb 2009 00:46:32 +0000 (18:46 -0600)]
kgdb,i386: use address that SP register points to in the exception frame
The treatment of the SP register is different on x86_64 and i386.
This is a regression fix that lived outside the mainline kernel from
2.6.27 to now. The regression was a result of the original merge
consolidation of the i386 and x86_64 archs to x86.
The incorrectly reported SP on i386 prevented stack tracebacks from
working correctly in gdb.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Thu, 14 May 2009 02:56:59 +0000 (21:56 -0500)]
sysrq, intel_fb: fix sysrq g collision
Commit 79e539453b34e35f39299a899d263b0a1f1670bd introduced a
regression where you cannot use sysrq 'g' to enter kgdb. The solution
is to move the intel fb sysrq over to V for video instead of G for
graphics. The SMP VOYAGER code to register for the sysrq-v is not
anywhere to be found in the mainline kernel, so the comments in the
code were cleaned up as well.
This patch also cleans up the sysrq definitions for kgdb to make it
generic for the kernel debugger, such that the sysrq 'g' can be used
in the future to enter a gdbstub or another kernel debugger.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ingo Molnar [Fri, 15 May 2009 09:03:23 +0000 (11:03 +0200)]
perf stat: handle Ctrl-C
Before this change, if a long-running perf stat workload was Ctrl-C-ed,
the utility exited without displaying statistics.
After the change, the Ctrl-C gets propagated into the workload (and
causes its early exit there), but perf stat itself will still continue
to run and will display counter results.
This is useful to run open-ended workloads, let them run for
a while, then Ctrl-C them to get the stats.
[ Impact: extend perf stat with new functionality ]
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Work is progressing to switch away from pdflush as the process backing
for flushing out dirty data. So it seems pointless to add more knobs
to control pdflush threads. The original author of the patch did not
have any specific use cases for adding the knobs, so we can easily
revert this before 2.6.30 to avoid having to maintain this API
forever.
David Brownell [Thu, 14 May 2009 20:01:59 +0000 (13:01 -0700)]
ASoC: DaVinci EVM board support buildfixes
This is a build fix, resyncing the DaVinci EVM ASoC board code
with the version in the DaVinci tree. That resync includes
support for the DM355 EVM, although that board isn't yet in
mainline.
(NOTE: also includes a bugfix to the platform_add_resources
call, recently sent by Chaithrika U S <chaithrika@ti.com> but
not yet merged into the DaVinci tree.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
David Brownell [Thu, 14 May 2009 19:47:42 +0000 (12:47 -0700)]
ASoC: DaVinci I2S updates
This resyncs the DaVinci I2S code with the version in the DaVinci
tree. The behavioral change uses updated clock interfaces which
recently merged to mainline. Two other changes include adding a
comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in
order to support more boards than just the DM644x EVM.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
David Brownell [Thu, 14 May 2009 19:41:22 +0000 (12:41 -0700)]
ASoC: davinci-pcm buildfixes
This is a buildfix for the DaVinci PCM code, resyncing it with
the version in the DaVinci tree. The notable change is using
current EDMA interfaces, which recently merged to mainline.
(The older interfaces never made it into mainline.)
NOTE: open issue, the DMA should be to/from SRAM; see chip
errata for more info. The artifacts are extremely easy to
hear on DM355 hardware (not yet supported in mainline), but
don't seem as audible on DM6446 hardwaare (which does have
mainline support).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Ingo Molnar [Thu, 14 May 2009 03:16:59 +0000 (05:16 +0200)]
perf_counter: Remove ACPI quirk
We had a disable/enable around acpi_idle_do_entry() due to an erratum
in an early prototype CPU i had access to. That erratum has been fixed
in the BIOS so remove the quirk.
The quirk also kept us from profiling interrupts that hit the ACPI idle
instruction - so this is an improvement as well, beyond a cleanup and
a micro-optimization.
Ingo Molnar [Fri, 15 May 2009 06:26:20 +0000 (08:26 +0200)]
perf_counter: x86: Protect against infinite loops in intel_pmu_handle_irq()
intel_pmu_handle_irq() can lock up in an infinite loop if the hardware
does not allow the acking of irqs. Alas, this happened in testing so
make this robust and emit a warning if it happens in the future.
Ingo Molnar [Fri, 15 May 2009 06:25:22 +0000 (08:25 +0200)]
perf_counter: x86: Disallow interval of 1
On certain CPUs i have observed a stuck PMU if interval was set to
1 and NMIs were used. The PMU had PMC0 set in MSR_CORE_PERF_GLOBAL_STATUS,
but it was not possible to ack it via MSR_CORE_PERF_GLOBAL_OVF_CTRL,
and the NMI loop got stuck infinitely.
[ Impact: fix rare hangs during high perfcounter load ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Wed, 13 May 2009 14:21:38 +0000 (16:21 +0200)]
perf_counter: Rework the perf counter disable/enable
The current disable/enable mechanism is:
token = hw_perf_save_disable();
...
/* do bits */
...
hw_perf_restore(token);
This works well, provided that the use nests properly. Except we don't.
x86 NMI/INT throttling has non-nested use of this, breaking things. Therefore
provide a reference counter disable/enable interface, where the first disable
disables the hardware, and the last enable enables the hardware again.
[ Impact: refactor, simplify the PMU disable/enable logic ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 13 May 2009 10:54:01 +0000 (12:54 +0200)]
perf_counter: x86: Fix throttling
If counters are disabled globally when a perfcounter IRQ/NMI hits,
and if we throttle in that case, we'll promote the '0' value to
the next lapic IRQ and disable all perfcounters at that point,
permanently ...
Fix it.
[ Impact: fix hung perfcounters under load ]
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Allow specifying a pid instead of always fork+exec'ing a command.
Because the PERF_EVENT_COMM and PERF_EVENT_MMAP events happened before
we connected, we must synthesize them so that 'perf report' can get what
it needs.
[ Impact: add new command line option ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090515015046.GA13664@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
A couple of issues crept in since about 2.6.27 related to accessing PCI
device ROMs on various powerpc machines.
First, historically, we don't allocate the ROM resource in the resource
tree. I'm not entirely certain of why, I susepct they often contained
garbage on x86 but it's hard to tell. This causes the current generic
code to always call pci_assign_resource() when trying to access the said
ROM from sysfs, which will try to re-assign some new address regardless
of what the ROM BAR was already set to at boot time. This can be a
problem on hypervisor platforms like pSeries where we aren't supposed
to move PCI devices around (and in fact probably can't).
Second, our code that generates the PCI tree from the OF device-tree
(instead of doing config space probing) which we mostly use on pseries
at the moment, didn't set the (new) flag IORESOURCE_SIZEALIGN on any
resource. That means that any attempt at re-assigning such a resource
with pci_assign_resource() would fail due to resource_alignment()
returning 0.
This fixes this by doing these two things:
- The code that calculates resource flags based on the OF device-node
is improved to set IORESOURCE_SIZEALIGN on any valid BAR, and while at
it also set IORESOURCE_READONLY for ROMs since we were lacking that too
- We now allocate ROM resources as part of the resource tree. However
to limit the chances of nasty conflicts due to busted firmwares, we
only do it on the second pass of our two-passes allocation scheme,
so that all valid and enabled BARs get precedence.
This brings pSeries back the ability to access PCI ROMs via sysfs (and
thus initialize various video cards from X etc...).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
powerpc/pseries: Really fix the oprofile CPU type on pseries
My previous pach for fixing the oprofile CPU type got somewhat mismerged
(by my fault) when it collided with another related patch. This should
finally (fingers crossed) fix the whole thing.
We make sure we keep the -old- oprofile type and CPU type whenever
one of them was specified in the first pass through the function.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Krill [Wed, 13 May 2009 05:56:54 +0000 (05:56 +0000)]
serial/nwpserial: Fix wrong register read address and add interrupt acknowledge.
The receive interrupt routine checks the wrong register if the
receive fifo is empty. Further an explicit interrupt acknowledge
write is introduced. In some circumstances another interrupt was
issued.
Signed-off-by: Benjamin Krill <ben@codiert.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Gerhard Stenzel [Wed, 13 May 2009 05:50:46 +0000 (05:50 +0000)]
powerpc/cell: Make ptcal more reliable
There have been a series of checkstops on QS21 related to
ptcal being set up incorrectly. On systems that only
have memory on a single node, ptcal fails when it gets
a pointer to memory on the remote node.
Moreover, agressive prefetching in memcpy and other
functions may accidentally touch the first cache line
of the page that we reserve for ptcal, which causes
an ECC checkstop.
We now allocate pages only from the specified node, moves the
ptcal area into the middle of the allocated page to avoid
potential prefetch problems and prints the address of the
ptcal area to facilitate diagnostics.
Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Kumar Gala [Fri, 8 May 2009 12:08:20 +0000 (12:08 +0000)]
powerpc/mpic: Fix incorrect allocation of interrupt rev-map
Before when we were setting up the irq host map for mpic we passed in
just isu_size for the size of the linear map. However, for a number of
mpic implementations we have no isu (thus pass in 0) and will end up
with a no linear map (size = 0). This causes us to always call
irq_find_mapping() from mpic_get_irq().
By moving the allocation of the host map to after we've determined the
number of sources we can actually benefit from having a linear map for
the non-isu users that covers all the interrupt sources.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Maynard Johnson [Thu, 7 May 2009 05:48:32 +0000 (05:48 +0000)]
powerpc: Fix oprofile sampling of marked events on POWER7
Description
-----------
Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on
older processors where those bits are defined.
Background
----------
The performance monitor unit of the 64-bit POWER processor family has the
ability to collect accurate instruction-level samples when profiling on marked
events (i.e., "PM_MRK_<event-name>"). In processors prior to POWER6, the MMCRA
register contained "slot information" that the oprofile kernel driver used to
adjust the value latched in the SIAR at the time of a PMU interrupt. But as of
POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use,
since the SIAR itself holds the accurate sampled instruction address. With
POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of
these slot bits was, in effect, a NOP. But with POWER7, these bits are no
longer zero'ed out; however, they serve some other purpose rather than slot
information. Thus, using these bits on POWER7 to adjust the SIAR value results
in samples being attributed to the wrong instructions. The attached patch
changes the oprofile kernel driver to ignore these slot bits on all newer
processors starting with POWER6.
Signed-off-by: Maynard Johnson <maynardj@us.ibm.com> Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
powerpc/iseries: Fix pci breakage due to bad dma_data initialization
Commit 4fc665b88a79a45bae8bbf3a05563c27c7337c3d "powerpc: Merge 32 and
64-bit dma code" made changes to the PCI initialisation code that added
an assignment to archdata.dma_data but only for 32 bit code. Commit 7eef440a545c7f812ed10b49d4a10a351df9cad6 "powerpc/pci: Cosmetic cleanups
of pci-common.c" removed the conditional compilation. Unfortunately,
the iSeries code setup the archdata.dma_data before that assignment was
done - effectively overwriting the dma_data with NULL.
Fix this up by moving the iSeries setup of dma_data into a
pci_dma_dev_setup callback.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Timur Tabi [Thu, 30 Apr 2009 18:16:44 +0000 (18:16 +0000)]
powerpc: Fix mktree build error on Mac OS X host
The mktree utility defines some variables as "uint", although this is not a
standard C type, and so cross-compiling on Mac OS X fails. Change this to
"unsigned int".
Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Linus Torvalds [Fri, 15 May 2009 02:19:43 +0000 (19:19 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (38 commits)
MIPS: Sibyte: Fix locking in set_irq_affinity
MIPS: Use force_sig when handling address errors.
MIPS: Cavium: Add struct clocksource * argument to octeon_cvmcount_read()
MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.
MIPS: Fix highmem.
MIPS: Fix sign-extension bug in 32-bit kernel on 32-bit hardware.
MIPS: MSP71xx: Remove the RAMROOT functions
MIPS: Use -mno-check-zero-division
MIPS: Set compiler options only after the compiler prefix has ben set.
MIPS: IP27: Get rid of #ident. Gcc 4.4.0 doesn't like it.
MIPS: uaccess: Switch lock annotations to might_fault().
MIPS: MSP71xx: Resolve use of non-existent GPIO routines in msp71xx reset
MIPS: MSP71xx: Resolve multiple definition of plat_timer_setup
MIPS: Make uaccess.h slightly more sparse friendly.
MIPS: Make access_ok() sideeffect proof.
MIPS: IP27: Fix clash with NMI_OFFSET from hardirq.h
MIPS: Alchemy: Timer build fix
MIPS: Kconfig: Delete duplicate definition of RWSEM_GENERIC_SPINLOCK.
MIPS: Cavium: Add support for 8k and 32k page sizes.
MIPS: TXx9: Fix possible overflow in clock calculations
...
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: Spelling fix in btrfs_lookup_first_block_group comments
Btrfs: make show_options result match actual option names
Btrfs: remove outdated comment in btrfs_ioctl_resize()
Btrfs: remove some WARN_ONs in the IO failure path
Btrfs: Don't loop forever on metadata IO failures
Btrfs: init inode ordered_data_close flag properly
Carl Worth [Wed, 29 Apr 2009 21:43:54 +0000 (14:43 -0700)]
drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.
This allows userlevel code to discover the pipe number corresponding
to a given CRTC ID. This is necessary for doing pipe-specific
operations such as waiting for vblank on a given CRTC. Failure to use
the right pipe mapping can result in GPU hangs, or at least failure
to actually sync to vblank.
Signed-off-by: Carl Worth <cworth@cworth.org>
[anholt: Style touchups from review] Signed-off-by: Eric Anholt <eric@anholt.net>
Ma Ling [Mon, 11 May 2009 03:33:22 +0000 (11:33 +0800)]
drm/i915: Set HDMI hot plug interrupt enable for only the output in question.
We detect HDMI output connection status by writing to HOT Plug Interrupt
Detect Enable bit in PORT_HOTPLUG_EN. The behavior will generate a specified
interrupt, which is caught by audio driver, but during one detection driver
set all Detect Enable bits of HDMIB, HDMIC HDMID, and generate wrong
interrupt signals for current output, according to the signals audio driver
misunderstand device status. The patch intends to handle corresponding
output precisely.
It fixed freedesktop.org bug #21371
Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Ma Ling [Wed, 13 May 2009 06:46:12 +0000 (14:46 +0800)]
drm/i915: Use the GM45 VGA hotplug workaround on G45 as well.
Although spec say CRT_HOTPLUG_ACTIVATION_PERIOD_64 is only useful for
mobile platform, it is also required to detect vga on G4x desktops correctly.
Tested on G45/G43/Q45 platforms with no regressions.
It fixed freedesktop.org bug #21120 and part of bug #21210
Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Jarod Wilson [Tue, 5 May 2009 14:00:25 +0000 (10:00 -0400)]
drm/i915: ignore LVDS on intel graphics systems that lie about having it
There are a number of small form factor desktop systems with Intel mobile
graphics chips that lie and say they have an LVDS. With kernel mode-setting,
this becomes a problem, and makes native resolution boot go haywire -- for
example, my Dell Studio Hybrid, hooked to a 1920x1080 display claims to
have a 1024x768 LVDS, and the resulting graphical boot on the 1920x1080
display uses only the top left 1024x768, and auto-configured X will end
up only 1024x768 as well. With this change, graphical boot and X
both do 1920x1080 as expected.
Note that we're simply embracing and extending the early bail-out code
in place for the Mac Mini here. The xorg intel driver uses pci subsystem
device and vendor id for matching, while we're using dmi lookups here.
The MSI addition is courtesy of and tested by Bill Nottingham.
Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Bill Nottingham <notting@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Jesse Barnes [Tue, 5 May 2009 23:03:48 +0000 (16:03 -0700)]
drm/i915: sanity check IER at wait_request time
We might sleep here anyway so I hope an extra uncached read is ok to
add.
In #20896 we found that vbetool clobbers the IER. In KMS mode this is
particularly bad since we don't set the interrupt regs late (in
EnterVT), so we'd fail to get *any* interrupts at all after X started
(since some distros have scripts that call vbetool at X startup
apparently).
So this patch checks IER at wait_request time, and re-enables
interrupts if it's been clobbered. In a proper config this check
should never be triggered.
This is really a distro issue, but having a sanity check is nice, as
long as it doesn't have a real performance hit.
Tested-by: Mateusz Kaduk <mateusz.kaduk@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: Moved the check inside of the sleeping case to avoid perf cost] Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Tue, 12 May 2009 22:27:36 +0000 (15:27 -0700)]
drm/i915: Don't allow binding objects into the last page of the aperture.
This should avoid a class of bugs where the hardware prefetches past the
end of the object, and walks into unallocated memory when the object is
bound to the last page of the aperture.
ext4: Clear the unwritten buffer_head flag after the extent is initialized
The BH_Unwritten flag indicates that the buffer is allocated on disk
but has not been written; that is, the disk was part of a persistent
preallocation area. That flag should only be set when a get_blocks()
function is looking up a inode's logical to physical block mapping.
When ext4_get_blocks_wrap() is called with create=1, the uninitialized
extent is converted into an initialized one, so the BH_Unwritten flag
is no longer appropriate. Hence, we need to make sure the
BH_Unwritten is not left set, since the combination of BH_Mapped and
BH_Unwritten is not allowed; among other things, it will result ext4's
get_block() to be called over and over again during the write_begin
phase of write(2).
Li Hong [Thu, 14 May 2009 17:52:21 +0000 (13:52 -0400)]
Btrfs: remove outdated comment in btrfs_ioctl_resize()
In Li Zefan's commit dae7b665cf6d6e6e733f1c9c16cf55547dd37e33,
a combination call of kmalloc() and copy_from_user() is replaced by
memdup_user(). So btrfs_ioctl_resize() doesn't use GFP_NOFS any more.
Signed-off-by: Li Hong <lihong.hi@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 14 May 2009 17:31:21 +0000 (13:31 -0400)]
Btrfs: remove some WARN_ONs in the IO failure path
These debugging WARN_ONs make too much console noise during regular
IO failures. An IO failure will still generate a number of messages
as we verify checksums etc, but these two are not needed.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 14 May 2009 17:24:30 +0000 (13:24 -0400)]
Btrfs: Don't loop forever on metadata IO failures
When a btrfs metadata read fails, the first thing we try to do is find
a good copy on another mirror of the block. If this fails, read_tree_block()
ends up returning a buffer that isn't up to date.
The btrfs btree reading code was reworked to drop locks and repeat
the search when IO was done, but the changes didn't add a check for failed
reads. The end result was looping forever on buffers that were never
going to become up to date.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 14 May 2009 17:10:02 +0000 (13:10 -0400)]
Btrfs: init inode ordered_data_close flag properly
This flag is used to decide when we need to send a given file through
the ordered code to make sure it is fully written before a transaction
commits. It was not being properly set to zero when the inode was
being setup.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
John Linn [Thu, 14 May 2009 16:23:11 +0000 (10:23 -0600)]
powerpc/virtex: Fix duplicate level irq events.
The interrupt controller was not handling level interrupts correctly
such that duplicate interrupts were happening. This fixes the problem
and adds edge type interrupts which are needed in Xilinx hardware.
Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
David Daney [Tue, 5 May 2009 19:49:47 +0000 (12:49 -0700)]
MIPS: Use force_sig when handling address errors.
When init is started it is SIGNAL_UNKILLABLE. If it were to get an
address error, we would try to send it SIGBUS, but it would be ignored
and the faulting instruction restarted. This results in an endless
loop.
We need to use force_sig() instead so it will actually die and give us
some useful information.
Coly Li [Wed, 22 Apr 2009 19:06:06 +0000 (03:06 +0800)]
MIPS: Cavium: Add struct clocksource * argument to octeon_cvmcount_read()
This patch modifies parameter of octeon_cvmcount_read() from 'void' to
'struct clocksource *cs', which fixes compile warning for incompatible
parameter type.
Signed-off-by: Coly Li <coly.li@suse.de> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
> From: Chris Dearman <chris@mips.com>
> Date: Wed, 19 Sep 2007 00:58:24 +0100
> Subject: [PATCH] [MIPS] Allow setting of the cache attribute at run time.
>
> Slightly tacky, but there is a precedent in the sparc archirecture code.
introduces the variable _page_cachable_default, which defaults to zero and.
is used to create the prototype PTE for __kmap_atomic in
arch/mips/mm/init.c:kmap_init before initialization in
arch/mips/mm/c-r4k.c:coherency_setup, so the default value of 0 will be
used as the CCA of kmap atomic pages which on many processors is not a
defined CCA value and may result in writes to kmap_atomic pages getting
corrupted. Debugged by Jon Fraser (jfraser@broadcom.com).
The RAMROOT function was a successful but non-portable attempt to append
the root filesystem to the end of the kernel image. The preferred and
portable solution is to use an initramfs instead.
projects / mirror_ubuntu-zesty-kernel.git / log