drm/i915/tgl: the BCS engine supports relative MMIO

The specs don't mention any specific HW limitation on the blitter and
manual inspection shows that the HW does set the relative MMIO bit in
the LRI of the blitter context image, so we can remove our limitations.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009230424.6507-1-daniele.ceraolospurio@intel.com

drm/i915/gt: execlists->active is serialised by the tasklet

The active/pending execlists is no longer protected by the
engine->active.lock, but is serialised by the tasklet instead. Update
the locking around the debug and stats to follow suit.

v2: local_bh_disable() to prevent recursing into the tasklet in case we
trigger a softirq (Tvrtko)

Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009160906.16195-1-chris@chris-wilson.co.uk

drm/i915/execlists: Protect peeking at execlists->active

Now that we dropped the engine->active.lock serialisation from around
process_csb(), direct submission can run concurrently to the interrupt
handler. As such execlists->active may be advanced as we dequeue,
dropping the reference to the request. We need to employ our RCU request
protection to ensure that the request is not freed too early.

Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009100955.21477-1-chris@chris-wilson.co.uk

drm/i915: Select DPLL's via mask

This slightly simplifies the EHL DPLL4 handling and also gives us more
flexibility in the future in case we need to skip the use of specific
PLL's (e.g., due to hardware workarounds and such).

v2:
 - Replace GENMASK() with or'd BIT()'s to make the specific DPLLs more
   explicit.  (Ville)
 - s/unsigned/unsigned long/.  (Lucas)

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008172920.11362-1-matthew.d.roper@intel.com

drm/i915/color: move check of gamma_enable to specific func/platform

Moved common code to check gamma_enable to specific funcs per platform
in bit_precision func. icl doesn't support that and chv has separate
enable knob for CGM LUT.

v2:
-Simplified chv_gamma_precision() [Ville]

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009065542.27415-3-swati2.sharma@intel.com

drm/i915/color: fix broken gamma state-checker during boot

Premature gamma lut prepration and loading which was getting
reflected in first modeset causing different colors on
screen during boot.

Issue: In BIOS, gamma is disabled by default. However, legacy read_luts()
was setting crtc_state->base.gamma_lut and gamma_lut was programmed
with junk values which led to visual artifacts (different
colored screens instead of usual black during boot).

Fix: Calling read_luts() only when gamma is enabled which will happen
after first modeset.

This fix is independent from the revert 1b8588741fdc ("Revert
"drm/i915/color: Extract icl_read_luts()"") and should fix different colors
on screen in legacy platforms too.

v2:
-Added gamma_enable checks inside read_luts() [Ville/Jani N]
-Corrected gamma enable check for CHV [Ville]

v3:
-Added check in ilk_read_luts() [Ville]
-Simplified gamma enable check for CHV [Ville]

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111809
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111885
Tested-by: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009065542.27415-2-swati2.sharma@intel.com

drm/i915/selftests: fix null pointer dereference on pointer data

In the case where data fails to be allocated the error exit path is
via label 'out' where data is dereferenced in a for-loop.  Fix this
by exiting via the label 'out_file' instead to avoid the null pointer
dereference.

Addresses-Coverity: ("Dereference after null check")
Fixes: 50d16d44cce4 ("drm/i915/selftests: Exercise context switching in parallel")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009100024.23077-1-colin.king@canonical.com

drm/i915/selftests: Hold request reference over waits

Take a reference on the request before submitting it to the HW and then
waiting on it for selftest_workarounds. Once submitted, the request may
be freed by a background worker, unless we take an extra reference for
ourselves.

References: https://bugs.freedesktop.org/show_bug.cgi?id=111926
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009061759.3189-1-chris@chris-wilson.co.uk

drm/i915/gt: Give engine->kernel_context distinct timeline lock classes

Assign a separate lockclass to the perma-pinned timelines of the
kernel_context, such that we can use them from within the user timelines
should we ever need to inject GPU operations to fixup faults during
request construction.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008185941.15228-1-chris@chris-wilson.co.uk

drm/i915/region: support volatile objects

Volatile objects are marked as DONTNEED while pinned, therefore once
unpinned the backing store can be discarded. This is limited to kernel
internal objects.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008160116.18379-4-matthew.auld@intel.com

drm/i915/region: support contiguous allocations

Some kernel internal objects may need to be allocated as a contiguous
block, also thinking ahead the various kernel io_mapping interfaces seem
to expect it, although this is purely a limitation in the kernel
API...so perhaps something to be improved.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Michael J Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008160116.18379-3-matthew.auld@intel.com

drm/i915: introduce intel_memory_region

Support memory regions, as defined by a given (start, end), and allow
creating GEM objects which are backed by said region. The immediate goal
here is to have something to represent our device memory, but later on
we also want to represent every memory domain with a region, so stolen,
shmem, and of course device. At some point we are probably going to want
use a common struct here, such that we are better aligned with say TTM.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008160116.18379-2-matthew.auld@intel.com

drm/i915/gt: Flush submission tasklet before waiting/retiring

A common bane of ours is arbitrary delays in ksoftirqd processing our
submission tasklet. Give the submission tasklet a kick before we wait to
avoid those delays eating into a tight timeout.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008105655.13256-1-chris@chris-wilson.co.uk

drm/i915/perf: drop list of streams

At some point in time there was the idea that we could have multiple
stream from the same piece of HW but that never materialized and given
the hard time we already have making everything work with the
submission side, there is no real point having this list of 1 element
around.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008140111.5437-1-chris@chris-wilson.co.uk

drm/i915/selftests: Assign the intel_runtime_pm pointer for mock_uncore

Couple up our mock_uncore to know about the fake global device and its
runtime powermanagement.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008145045.23157-1-chris@chris-wilson.co.uk

drm/i915/selftests: Assign the mock_engine->uncore shortcut

Set up the engine->uncore shortcut on mock_engine creation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008071121.25088-1-chris@chris-wilson.co.uk

drm/i915/execlists: Assign virtual_engine->uncore from first sibling

Copy across the engine->uncore shortcut to the virtual_engine from its
first physical engine, similar to the handling of the engine->gt
backpointer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008070342.4045-1-chris@chris-wilson.co.uk

drm/i915/tgl: Add DC3CO counter in i915_dmc_info

Adding DC3CO counter in i915_dmc_info debugfs will be
useful for DC3CO validation.
DMC firmware uses DMC_DEBUG3 register as DC3CO counter
register on TGL, as per B.Specs DMC_DEBUG3 is general
purpose register.

v1: comment modification for DMC_DBUG3.
    using GEN >= 12 check instead of IS_TIGERLAKE()
    to print DMC_DEBUG3 counter value.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-7-anshuman.gupta@intel.com

drm/i915/tgl: Switch between dc3co and dc5 based on display idleness

DC3CO is useful power state, when DMC detects PSR2 idle frame
while an active video playback, playing 30fps video on 60hz panel
is the classic example of this use case.

B.Specs:49196 has a restriction to enable DC3CO only for Video Playback.
It will be worthy to enable DC3CO after completion of each pageflip
and switch back to DC5 when display is idle because driver doesn't
differentiate between video playback and a normal pageflip.
We will use Frontbuffer flush call tgl_dc3co_flush() to enable DC3CO
state only for ORIGIN_FLIP flush call, because DC3CO state has primarily
targeted for VPB use case. We are not interested here for frontbuffer
invalidates calls because that triggers PSR2 exit, which will
explicitly disable DC3CO.

DC5 and DC6 saves more power, but can't be entered during video
playback because there are not enough idle frames in a row to meet
most PSR2 panel deep sleep entry requirement typically 4 frames.
As PSR2 existing implementation is using minimum 6 idle frames for
deep sleep, it is safer to enable DC5/6 after 6 idle frames
(By scheduling a delayed work of 6 idle frames, once DC3CO has been
enabled after a pageflip).

After manually waiting for 6 idle frames DC5/6 will be enabled and
PSR2 deep sleep idle frames will be restored to 6 idle frames, at this
point DMC will triggers DC5/6 once PSR2 enters to deep sleep after
6 idle frames.
In future when we will enable S/W PSR2 tracking, we can change the
PSR2 required deep sleep idle frames to 1 so DMC can trigger the
DC5/6 immediately after S/W manual waiting of 6 idle frames get
complete.

v2: calculated s/w state to switch over dc3co when there is an
    update. [Imre]
    Used cancel_delayed_work_sync() in order to avoid any race
    with already scheduled delayed work. [Imre]
v3: Cancel_delayed_work_sync() may blocked the commit work.
    hence dropping it, dc5_idle_thread() checks the valid wakeref before
    putting the reference count, which avoids any chances of dropping
    a zero wakeref. [Imre (IRC)]
v4: Used frontbuffer flush mechanism. [Imre]
v5: Used psr.pipe to extract frontbuffer busy bits. [Imre]
    Used cancel_delayed_work_sync() in encoder disable path. [Imre]
    Used mod_delayed_work() instead of cancelling and scheduling a
    delayed work. [Imre]
    Used psr.lock in tgl_dc5_idle_thread() to enable psr2 deep
    sleep. [Imre]
    Removed DC5_REQ_IDLE_FRAMES macro. [Imre]
v6: Used dc3co_exitline check instead of TGL and dc3co allowed_dc_mask
    checks, used delayed_work_pending with the psr lock and removed the
    psr2_deep_slp_disabled flag. [Imre]
v7: Code refactoring, moved most of functional code to inte_psr.c [Imre]
    Using frontbuffer_bits on psr.pipe check instead of
    busy_frontbuffer_bits. [Imre]
    Calculating dc3co_exit_delay in intel_psr_enable_locked. [Imre]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-6-anshuman.gupta@intel.com

drm/i915/tgl: Do modeset to enable and configure DC3CO exitline

DC3CO enabling B.Specs sequence requires to enable end configure
exit scanlines to TRANS_EXITLINE register, programming this register
has to be part of modeset sequence as this can't be change when
transcoder or port is enabled.
When system boots with only eDP panel there may not be real
modeset as BIOS has already programmed the necessary registers,
therefore it needs to force a modeset to enable and configure
DC3CO exitline.

v1: Computing dc3co_exitline crtc state from a DP encoder
    compute config. [Imre]
    Enabling and disabling DC3CO PSR2 transcoder exitline from
    encoder pre_enable and post_disable hooks. [Imre]
    Computing dc3co_exitline instead of has_dc3co_exitline bool. [Imre]
v2: Code refactoring for symmetry and to avoid exported function. [Imre]
    Removing IS_TIGERLAKE check from compute_config, adding PIPE_A
    restriction and clearing dc3co_exitline state if crtc is not active
    or it is not PSR2 capable in dc3co exitline compute_config. [Imre]
    Using GEN >= 12 check in dc3co exitline get_config. [Imre]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-5-anshuman.gupta@intel.com

drm/i915/tgl: Enable DC3CO state in "DC Off" power well

Add target_dc_state and used by set_target_dc_state API
in order to enable DC3CO state with existing DC states.
target_dc_state will enable/disable the desired DC state in
DC_STATE_EN reg when "DC Off" power well gets disable/enable.

v2: commit log improvement.
v3: Used intel_wait_for_register to wait for DC3CO exit. [Imre]
    Used gen9_set_dc_state() to allow/disallow DC3CO. [Imre]
    Moved transcoder psr2 exit line enablement from tgl_allow_dc3co()
    to a appropriate place haswell_crtc_enable(). [Imre]
    Changed the DC3CO power well enabled call back logic as
    recommended in review comments. [Imre]
v4: Used wait_for_us() instead of intel_wait_for_reg(). [Imre (IRC)]
v5: using udelay() instead of waiting for DC3CO exit status.
v6: Fixed minor unwanted change.
v7: Removed DC3CO powerwell and POWER_DOMAIN_VIDEO.
v8: Uniform checks by using only target_dc_state instead of allowed_dc_mask
    in "DC off" power well callback. [Imre]
    Adding "DC off" power well id to older platforms. [Imre]
    Removed psr2_deep_sleep flag from tgl_set_target_dc_state. [Imre]
v9: Used switch case for target DC state in
    gen9_dc_off_power_well_disable(), checking DC3CO state against
    allowed DC mask, using WARN_ON() in
    tgl_set_target_dc_state(). [Imre]
v10: Code refactoring and using sanitize_target_dc_state(). [Imre]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-4-anshuman.gupta@intel.com

drm/i915/tgl: Add DC3CO mask to allowed_dc_mask and gen9_dc_mask

Enable dc3co state in enable_dc module param and add dc3co
enable mask to allowed_dc_mask and gen9_dc_mask.

v1: Adding enable_dc=3,4 options to enable DC3CO with DC5 and DC6
    independently. [Animesh]
v2: Using a switch statement for cleaner code. [Animesh]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-3-anshuman.gupta@intel.com

drm/i915/tgl: Add DC3CO required register and bits

Adding following definition to i915_reg.h
1. DC_STATE_EN register DC3CO bit fields and masks.
   DC3CO enable bit will be used by driver to make DC3CO
   ready for DMC f/w and status bit will be used as DC3CO
   entry status.
2. Transcoder EXITLINE register and its bit fields and mask.
   Transcoder EXITLINE enable bit represents PSR2 idle frame
   reset should be applied at exit line and exitlines mask
   represent required number of scanlines at which DC3CO
   exit happens.

   B.Specs:49196

v1: Use of REG_BIT and using extra space for EXITLINE_ macro
    definition. [Animesh]
v2: Grouping EXITLINE reg bits with EXITLINE(trans) define,
    no functional change. [Ville]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007094607.2111-1-anshuman.gupta@intel.com

drm/i915/perf: Set the exclusive stream under perf->lock

The BKL struct_mutex is no more, the only serialisation we required for
setting the exclusive stream is already managed by ce->pin_mutex in
gen8_configure_all_contexts(). As such, we can manipulate
i915_perf.exclusive_stream underneath our own (already held) perf->lock.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007140812.10963-2-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20191007210942.18145-2-chris@chris-wilson.co.uk

drm/i915/perf: Wean ourselves off dev_priv

Use the local uncore accessors for the GT rather than using the [not-so]
magic global dev_priv mmio routines. In the process, we also teach the
perf stream to use backpointers to the i915_perf rather than digging it
out of dev_priv.

v2: Rebase onto i915_perf_types.h

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20191007140812.10963-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20191007210942.18145-1-chris@chris-wilson.co.uk

drm/i915: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
    $ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007173346.9379-1-krzk@kernel.org

drm/i915/gt: Treat a busy timeline as 'active' while waiting

If we cannot claim the timeline->mutex while preparing for a wait on it,
we have to skip the timeline. In doing so, treat it as active so that
under a intel_gt_wait_for_idle() loop, we repeat the wait after
scheduling away.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006165002.30312-4-chris@chris-wilson.co.uk

drm/i915/selftests: Appease lockdep

Disable irqs around updating the context image to keep lockdep happy:

<4>[  673.483340] WARNING: possible irq lock inversion dependency detected
<4>[  673.483342] 5.4.0-rc1-CI-Trybot_5118+ #1 Tainted: G     U
<4>[  673.483342] --------------------------------------------------------
<4>[  673.483343] swapper/2/0 just changed the state of lock:
<4>[  673.483344] ffff88845db885a0 (&i915_request_get(rq)->submit/1){-...}, at: __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.483387] but this lock took another, HARDIRQ-unsafe lock in the past:
<4>[  673.483388]  (&ce->pin_mutex/2){+...}
<4>[  673.483389]

                  and interrupts could create inverse lock ordering between them.

<4>[  673.483390]
                  other info that might help us debug this:
<4>[  673.483390] Chain exists of:
                    &i915_request_get(rq)->submit/1 --> &engine->active.lock --> &ce->pin_mutex/2

<4>[  673.483392]  Possible interrupt unsafe locking scenario:

<4>[  673.483392]        CPU0                    CPU1
<4>[  673.483393]        ----                    ----
<4>[  673.483393]   lock(&ce->pin_mutex/2);
<4>[  673.483394]                                local_irq_disable();
<4>[  673.483395]                                lock(&i915_request_get(rq)->submit/1);
<4>[  673.483396]                                lock(&engine->active.lock);
<4>[  673.483396]   <Interrupt>
<4>[  673.483397]     lock(&i915_request_get(rq)->submit/1);
<4>[  673.483398]
                   *** DEADLOCK ***

<4>[  673.483398] 2 locks held by swapper/2/0:
<4>[  673.483399]  #0: ffff8883f61ac9b0 (&(&gt->irq_lock)->rlock){-.-.}, at: gen11_gt_irq_handler+0x42/0x280 [i915]
<4>[  673.483433]  #1: ffff88845db8c418 (&(&rq->lock)->rlock){-.-.}, at: intel_engine_breadcrumbs_irq+0x34a/0x5a0 [i915]
<4>[  673.483463]
                  the shortest dependencies between 2nd lock and 1st lock:
<4>[  673.483466]   -> (&ce->pin_mutex/2){+...} ops: 614520 {
<4>[  673.483468]      HARDIRQ-ON-W at:
<4>[  673.483471]                         lock_acquire+0xa7/0x1c0
<4>[  673.483501]                         live_unlite_restore+0x1d8/0x6c0 [i915]
<4>[  673.483543]                         __i915_subtests+0xb8/0x210 [i915]
<4>[  673.483581]                         __run_selftests+0x112/0x170 [i915]
<4>[  673.483615]                         i915_live_selftests+0x2c/0x60 [i915]
<4>[  673.483644]                         i915_pci_probe+0x93/0x1b0 [i915]
<4>[  673.483646]                         pci_device_probe+0x9e/0x120
<4>[  673.483648]                         really_probe+0xea/0x420
<4>[  673.483649]                         driver_probe_device+0x10b/0x120
<4>[  673.483651]                         device_driver_attach+0x4a/0x50
<4>[  673.483652]                         __driver_attach+0x97/0x130
<4>[  673.483653]                         bus_for_each_dev+0x74/0xc0
<4>[  673.483654]                         bus_add_driver+0x142/0x220
<4>[  673.483655]                         driver_register+0x56/0xf0
<4>[  673.483657]                         do_one_initcall+0x58/0x2ff
<4>[  673.483659]                         do_init_module+0x56/0x1f8
<4>[  673.483660]                         load_module+0x243e/0x29f0
<4>[  673.483661]                         __do_sys_finit_module+0xe9/0x110
<4>[  673.483662]                         do_syscall_64+0x4f/0x210
<4>[  673.483665]                         entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.483665]      INITIAL USE at:
<4>[  673.483667]                        lock_acquire+0xa7/0x1c0
<4>[  673.483698]                        live_unlite_restore+0x1d8/0x6c0 [i915]
<4>[  673.483733]                        __i915_subtests+0xb8/0x210 [i915]
<4>[  673.483764]                        __run_selftests+0x112/0x170 [i915]
<4>[  673.483793]                        i915_live_selftests+0x2c/0x60 [i915]
<4>[  673.483821]                        i915_pci_probe+0x93/0x1b0 [i915]
<4>[  673.483822]                        pci_device_probe+0x9e/0x120
<4>[  673.483824]                        really_probe+0xea/0x420
<4>[  673.483825]                        driver_probe_device+0x10b/0x120
<4>[  673.483826]                        device_driver_attach+0x4a/0x50
<4>[  673.483827]                        __driver_attach+0x97/0x130
<4>[  673.483828]                        bus_for_each_dev+0x74/0xc0
<4>[  673.483829]                        bus_add_driver+0x142/0x220
<4>[  673.483830]                        driver_register+0x56/0xf0
<4>[  673.483831]                        do_one_initcall+0x58/0x2ff
<4>[  673.483833]                        do_init_module+0x56/0x1f8
<4>[  673.483834]                        load_module+0x243e/0x29f0
<4>[  673.483835]                        __do_sys_finit_module+0xe9/0x110
<4>[  673.483836]                        do_syscall_64+0x4f/0x210
<4>[  673.483837]                        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.483838]    }
<4>[  673.483868]    ... key      at: [<ffffffffa0a8f132>] __key.70113+0x2/0xffffffffffef2ed0 [i915]
<4>[  673.483869]    ... acquired at:
<4>[  673.483935]    __execlists_reset+0xfb/0xc20 [i915]
<4>[  673.483965]    execlists_reset+0x3d/0x50 [i915]
<4>[  673.483995]    intel_engine_reset+0xdf/0x230 [i915]
<4>[  673.484022]    live_preempt_hang+0x1d7/0x2e0 [i915]
<4>[  673.484064]    __i915_subtests+0xb8/0x210 [i915]
<4>[  673.484130]    __run_selftests+0x112/0x170 [i915]
<4>[  673.484163]    i915_live_selftests+0x2c/0x60 [i915]
<4>[  673.484193]    i915_pci_probe+0x93/0x1b0 [i915]
<4>[  673.484194]    pci_device_probe+0x9e/0x120
<4>[  673.484195]    really_probe+0xea/0x420
<4>[  673.484196]    driver_probe_device+0x10b/0x120
<4>[  673.484197]    device_driver_attach+0x4a/0x50
<4>[  673.484198]    __driver_attach+0x97/0x130
<4>[  673.484199]    bus_for_each_dev+0x74/0xc0
<4>[  673.484200]    bus_add_driver+0x142/0x220
<4>[  673.484202]    driver_register+0x56/0xf0
<4>[  673.484203]    do_one_initcall+0x58/0x2ff
<4>[  673.484204]    do_init_module+0x56/0x1f8
<4>[  673.484205]    load_module+0x243e/0x29f0
<4>[  673.484206]    __do_sys_finit_module+0xe9/0x110
<4>[  673.484207]    do_syscall_64+0x4f/0x210
<4>[  673.484208]    entry_SYSCALL_64_after_hwframe+0x49/0xbe

<4>[  673.484209]  -> (&engine->active.lock){..-.} ops: 972791 {
<4>[  673.484211]     IN-SOFTIRQ-W at:
<4>[  673.484213]                       lock_acquire+0xa7/0x1c0
<4>[  673.484214]                       _raw_spin_lock_irqsave+0x33/0x50
<4>[  673.484244]                       execlists_submission_tasklet+0xaf/0x100 [i915]
<4>[  673.484246]                       tasklet_action_common.isra.18+0x6c/0x1c0
<4>[  673.484247]                       __do_softirq+0xdf/0x47f
<4>[  673.484248]                       irq_exit+0xba/0xc0
<4>[  673.484249]                       do_IRQ+0x83/0x160
<4>[  673.484250]                       ret_from_intr+0x0/0x1d
<4>[  673.484252]                       cpuidle_enter_state+0xb2/0x450
<4>[  673.484253]                       cpuidle_enter+0x24/0x40
<4>[  673.484254]                       do_idle+0x1e7/0x250
<4>[  673.484256]                       cpu_startup_entry+0x14/0x20
<4>[  673.484257]                       start_secondary+0x15f/0x1b0
<4>[  673.484258]                       secondary_startup_64+0xa4/0xb0
<4>[  673.484259]     INITIAL USE at:
<4>[  673.484261]                      lock_acquire+0xa7/0x1c0
<4>[  673.484290]                      intel_engine_init_active+0x7e/0xb0 [i915]
<4>[  673.484305]                      intel_engines_setup+0x1cd/0x3b0 [i915]
<4>[  673.484305]                      i915_gem_init+0x12d/0x900 [i915]
<4>[  673.484305]                      i915_driver_probe+0xb70/0x15d0 [i915]
<4>[  673.484305]                      i915_pci_probe+0x43/0x1b0 [i915]
<4>[  673.484305]                      pci_device_probe+0x9e/0x120
<4>[  673.484305]                      really_probe+0xea/0x420
<4>[  673.484305]                      driver_probe_device+0x10b/0x120
<4>[  673.484305]                      device_driver_attach+0x4a/0x50
<4>[  673.484305]                      __driver_attach+0x97/0x130
<4>[  673.484305]                      bus_for_each_dev+0x74/0xc0
<4>[  673.484305]                      bus_add_driver+0x142/0x220
<4>[  673.484305]                      driver_register+0x56/0xf0
<4>[  673.484305]                      do_one_initcall+0x58/0x2ff
<4>[  673.484305]                      do_init_module+0x56/0x1f8
<4>[  673.484305]                      load_module+0x243e/0x29f0
<4>[  673.484305]                      __do_sys_finit_module+0xe9/0x110
<4>[  673.484305]                      do_syscall_64+0x4f/0x210
<4>[  673.484305]                      entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.484305]   }
<4>[  673.484305]   ... key      at: [<ffffffffa0a8f160>] __key.70307+0x0/0xffffffffffef2ea0 [i915]
<4>[  673.484305]   ... acquired at:
<4>[  673.484305]    _raw_spin_lock_irqsave+0x33/0x50
<4>[  673.484305]    execlists_submit_request+0x2b/0x1e0 [i915]
<4>[  673.484305]    submit_notify+0xa8/0x13c [i915]
<4>[  673.484305]    __i915_sw_fence_complete+0x81/0x250 [i915]
<4>[  673.484305]    i915_sw_fence_wake+0x51/0x70 [i915]
<4>[  673.484305]    __i915_sw_fence_complete+0x1ee/0x250 [i915]
<4>[  673.484305]    dma_i915_sw_fence_wake+0x1b/0x30 [i915]
<4>[  673.484305]    dma_fence_signal_locked+0x9e/0x1b0
<4>[  673.484305]    dma_fence_signal+0x1f/0x40
<4>[  673.484305]    fence_work+0x28/0x80 [i915]
<4>[  673.484305]    process_one_work+0x26a/0x620
<4>[  673.484305]    worker_thread+0x37/0x380
<4>[  673.484305]    kthread+0x119/0x130
<4>[  673.484305]    ret_from_fork+0x24/0x50

<4>[  673.484305] -> (&i915_request_get(rq)->submit/1){-...} ops: 857694 {
<4>[  673.484305]    IN-HARDIRQ-W at:
<4>[  673.484305]                     lock_acquire+0xa7/0x1c0
<4>[  673.484305]                     _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]                     __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]                     intel_engine_breadcrumbs_irq+0x3d0/0x5a0 [i915]
<4>[  673.484305]                     cs_irq_handler+0x39/0x50 [i915]
<4>[  673.484305]                     gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  673.484305]                     gen11_irq_handler+0x54/0xf0 [i915]
<4>[  673.484305]                     __handle_irq_event_percpu+0x41/0x2c0
<4>[  673.484305]                     handle_irq_event_percpu+0x2b/0x70
<4>[  673.484305]                     handle_irq_event+0x2f/0x50
<4>[  673.484305]                     handle_edge_irq+0x99/0x1b0
<4>[  673.484305]                     do_IRQ+0x7e/0x160
<4>[  673.484305]                     ret_from_intr+0x0/0x1d
<4>[  673.484305]                     cpuidle_enter_state+0xb2/0x450
<4>[  673.484305]                     cpuidle_enter+0x24/0x40
<4>[  673.484305]                     do_idle+0x1e7/0x250
<4>[  673.484305]                     cpu_startup_entry+0x14/0x20
<4>[  673.484305]                     start_secondary+0x15f/0x1b0
<4>[  673.484305]                     secondary_startup_64+0xa4/0xb0
<4>[  673.484305]    INITIAL USE at:
<4>[  673.484305]                    lock_acquire+0xa7/0x1c0
<4>[  673.484305]                    _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]                    __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]                    __engine_park+0x233/0x420 [i915]
<4>[  673.484305]                    ____intel_wakeref_put_last+0x1c/0x70 [i915]
<4>[  673.484305]                    intel_gt_resume+0x202/0x2c0 [i915]
<4>[  673.484305]                    i915_gem_init+0x36e/0x900 [i915]
<4>[  673.484305]                    i915_driver_probe+0xb70/0x15d0 [i915]
<4>[  673.484305]                    i915_pci_probe+0x43/0x1b0 [i915]
<4>[  673.484305]                    pci_device_probe+0x9e/0x120
<4>[  673.484305]                    really_probe+0xea/0x420
<4>[  673.484305]                    driver_probe_device+0x10b/0x120
<4>[  673.484305]                    device_driver_attach+0x4a/0x50
<4>[  673.484305]                    __driver_attach+0x97/0x130
<4>[  673.484305]                    bus_for_each_dev+0x74/0xc0
<4>[  673.484305]                    bus_add_driver+0x142/0x220
<4>[  673.484305]                    driver_register+0x56/0xf0
<4>[  673.484305]                    do_one_initcall+0x58/0x2ff
<4>[  673.484305]                    do_init_module+0x56/0x1f8
<4>[  673.484305]                    load_module+0x243e/0x29f0
<4>[  673.484305]                    __do_sys_finit_module+0xe9/0x110
<4>[  673.484305]                    do_syscall_64+0x4f/0x210
<4>[  673.484305]                    entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.484305]  }
<4>[  673.484305]  ... key      at: [<ffffffffa0a8f6a1>] __key.80173+0x1/0xffffffffffef2960 [i915]
<4>[  673.484305]  ... acquired at:
<4>[  673.484305]    mark_lock+0x382/0x500
<4>[  673.484305]    __lock_acquire+0x7e1/0x15d0
<4>[  673.484305]    lock_acquire+0xa7/0x1c0
<4>[  673.484305]    _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]    __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]    intel_engine_breadcrumbs_irq+0x3d0/0x5a0 [i915]
<4>[  673.484305]    cs_irq_handler+0x39/0x50 [i915]
<4>[  673.484305]    gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  673.484305]    gen11_irq_handler+0x54/0xf0 [i915]
<4>[  673.484305]    __handle_irq_event_percpu+0x41/0x2c0
<4>[  673.484305]    handle_irq_event_percpu+0x2b/0x70
<4>[  673.484305]    handle_irq_event+0x2f/0x50
<4>[  673.484305]    handle_edge_irq+0x99/0x1b0
<4>[  673.484305]    do_IRQ+0x7e/0x160
<4>[  673.484305]    ret_from_intr+0x0/0x1d
<4>[  673.484305]    cpuidle_enter_state+0xb2/0x450
<4>[  673.484305]    cpuidle_enter+0x24/0x40
<4>[  673.484305]    do_idle+0x1e7/0x250
<4>[  673.484305]    cpu_startup_entry+0x14/0x20
<4>[  673.484305]    start_secondary+0x15f/0x1b0
<4>[  673.484305]    secondary_startup_64+0xa4/0xb0

<4>[  673.484305]
                  stack backtrace:
<4>[  673.484305] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G     U            5.4.0-rc1-CI-Trybot_5118+ #1
<4>[  673.484305] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019
<4>[  673.484305] Call Trace:
<4>[  673.484305]  <IRQ>
<4>[  673.484305]  dump_stack+0x67/0x9b
<4>[  673.484305]  check_usage_forwards+0x13c/0x150
<4>[  673.484305]  ? mark_lock+0x382/0x500
<4>[  673.484305]  mark_lock+0x382/0x500
<4>[  673.484305]  ? check_usage_backwards+0x140/0x140
<4>[  673.484305]  __lock_acquire+0x7e1/0x15d0
<4>[  673.484305]  ? debug_object_deactivate+0x17e/0x190
<4>[  673.484305]  lock_acquire+0xa7/0x1c0
<4>[  673.484305]  ? __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]  _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]  ? __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]  __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]  intel_engine_breadcrumbs_irq+0x3d0/0x5a0 [i915]
<4>[  673.484305]  cs_irq_handler+0x39/0x50 [i915]
<4>[  673.484305]  gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  673.484305]  gen11_irq_handler+0x54/0xf0 [i915]
<4>[  673.484305]  __handle_irq_event_percpu+0x41/0x2c0
<4>[  673.484305]  handle_irq_event_percpu+0x2b/0x70
<4>[  673.484305]  handle_irq_event+0x2f/0x50
<4>[  673.484305]  handle_edge_irq+0x99/0x1b0
<4>[  673.484305]  do_IRQ+0x7e/0x160
<4>[  673.484305]  common_interrupt+0xf/0xf
<4>[  673.484305]  </IRQ>

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004203121.31138-1-chris@chris-wilson.co.uk

drm/i915/execlists: Fix annotation for decoupling virtual request

As we may signal a request and take the engine->active.lock within the
signaler, the engine submission paths have to use a nested annotation on
their requests -- but we guarantee that we can never submit on the same
engine as the signaling fence.

<4>[  723.763281] WARNING: possible circular locking dependency detected
<4>[  723.763285] 5.3.0-g80fa0e042cdb-drmtip_379+ #1 Tainted: G     U
<4>[  723.763288] ------------------------------------------------------
<4>[  723.763291] gem_exec_await/1388 is trying to acquire lock:
<4>[  723.763294] ffff93a7b53221d8 (&engine->active.lock){..-.}, at: execlists_submit_request+0x2b/0x1e0 [i915]
<4>[  723.763378]
                  but task is already holding lock:
<4>[  723.763381] ffff93a7c25f6d20 (&i915_request_get(rq)->submit/1){-.-.}, at: __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  723.763420]
                  which lock already depends on the new lock.

<4>[  723.763423]
                  the existing dependency chain (in reverse order) is:
<4>[  723.763427]
                  -> #2 (&i915_request_get(rq)->submit/1){-.-.}:
<4>[  723.763434]        _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  723.763478]        __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  723.763513]        intel_engine_breadcrumbs_irq+0x3aa/0x5e0 [i915]
<4>[  723.763600]        cs_irq_handler+0x49/0x50 [i915]
<4>[  723.763659]        gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  723.763690]        gen11_irq_handler+0x54/0xf0 [i915]
<4>[  723.763695]        __handle_irq_event_percpu+0x41/0x2d0
<4>[  723.763699]        handle_irq_event_percpu+0x2b/0x70
<4>[  723.763702]        handle_irq_event+0x2f/0x50
<4>[  723.763706]        handle_edge_irq+0xee/0x1a0
<4>[  723.763709]        do_IRQ+0x7e/0x160
<4>[  723.763712]        ret_from_intr+0x0/0x1d
<4>[  723.763717]        __slab_alloc.isra.28.constprop.33+0x4f/0x70
<4>[  723.763720]        kmem_cache_alloc+0x28d/0x2f0
<4>[  723.763724]        vm_area_dup+0x15/0x40
<4>[  723.763727]        dup_mm+0x2dd/0x550
<4>[  723.763730]        copy_process+0xf21/0x1ef0
<4>[  723.763734]        _do_fork+0x71/0x670
<4>[  723.763737]        __se_sys_clone+0x6e/0xa0
<4>[  723.763741]        do_syscall_64+0x4f/0x210
<4>[  723.763744]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  723.763747]
                  -> #1 (&(&rq->lock)->rlock#2){-.-.}:
<4>[  723.763752]        _raw_spin_lock+0x2a/0x40
<4>[  723.763789]        __unwind_incomplete_requests+0x3eb/0x450 [i915]
<4>[  723.763825]        __execlists_submission_tasklet+0x9ec/0x1d60 [i915]
<4>[  723.763864]        execlists_submission_tasklet+0x34/0x50 [i915]
<4>[  723.763874]        tasklet_action_common.isra.5+0x47/0xb0
<4>[  723.763878]        __do_softirq+0xd8/0x4ae
<4>[  723.763881]        irq_exit+0xa9/0xc0
<4>[  723.763883]        smp_apic_timer_interrupt+0xb7/0x280
<4>[  723.763887]        apic_timer_interrupt+0xf/0x20
<4>[  723.763892]        cpuidle_enter_state+0xae/0x450
<4>[  723.763895]        cpuidle_enter+0x24/0x40
<4>[  723.763899]        do_idle+0x1e7/0x250
<4>[  723.763902]        cpu_startup_entry+0x14/0x20
<4>[  723.763905]        start_secondary+0x15f/0x1b0
<4>[  723.763908]        secondary_startup_64+0xa4/0xb0
<4>[  723.763911]
                  -> #0 (&engine->active.lock){..-.}:
<4>[  723.763916]        __lock_acquire+0x15d8/0x1ea0
<4>[  723.763919]        lock_acquire+0xa6/0x1c0
<4>[  723.763922]        _raw_spin_lock_irqsave+0x33/0x50
<4>[  723.763956]        execlists_submit_request+0x2b/0x1e0 [i915]
<4>[  723.764002]        submit_notify+0xa8/0x13c [i915]
<4>[  723.764035]        __i915_sw_fence_complete+0x81/0x250 [i915]
<4>[  723.764054]        i915_sw_fence_wake+0x51/0x64 [i915]
<4>[  723.764054]        __i915_sw_fence_complete+0x1ee/0x250 [i915]
<4>[  723.764054]        dma_i915_sw_fence_wake_timer+0x14/0x20 [i915]
<4>[  723.764054]        dma_fence_signal_locked+0x9e/0x1c0
<4>[  723.764054]        dma_fence_signal+0x1f/0x40
<4>[  723.764054]        vgem_fence_signal_ioctl+0x67/0xc0 [vgem]
<4>[  723.764054]        drm_ioctl_kernel+0x83/0xf0
<4>[  723.764054]        drm_ioctl+0x2f3/0x3b0
<4>[  723.764054]        do_vfs_ioctl+0xa0/0x6f0
<4>[  723.764054]        ksys_ioctl+0x35/0x60
<4>[  723.764054]        __x64_sys_ioctl+0x11/0x20
<4>[  723.764054]        do_syscall_64+0x4f/0x210
<4>[  723.764054]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  723.764054]
                  other info that might help us debug this:

<4>[  723.764054] Chain exists of:
                    &engine->active.lock --> &(&rq->lock)->rlock#2 --> &i915_request_get(rq)->submit/1

<4>[  723.764054]  Possible unsafe locking scenario:

<4>[  723.764054]        CPU0                    CPU1
<4>[  723.764054]        ----                    ----
<4>[  723.764054]   lock(&i915_request_get(rq)->submit/1);
<4>[  723.764054]                                lock(&(&rq->lock)->rlock#2);
<4>[  723.764054]                                lock(&i915_request_get(rq)->submit/1);
<4>[  723.764054]   lock(&engine->active.lock);
<4>[  723.764054]
                   *** DEADLOCK ***

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111862
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004194758.19679-1-chris@chris-wilson.co.uk

drm/i915/gt: Prefer local path to runtime powermanagement

Avoid going to the base i915 device when we already have a path from gt
to the runtime powermanagement interface. The benefit is that it looks a
bit more self-consistent to always be acquiring the gt->uncore->rpm for
use with the gt->uncore.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007154531.1750-1-chris@chris-wilson.co.uk

drm/i915: make array hw_engine_mask static, makes object smaller

Don't populate the array hw_engine_mask on the stack but instead make it
static. Makes the object code smaller by 316 bytes.

Before:
   text    data     bss     dec     hex filename
  34004    4388     320   38712    9738 gpu/drm/i915/gt/intel_reset.o

After:
   text    data     bss     dec     hex filename
  33528    4548     320   38396    95fc gpu/drm/i915/gt/intel_reset.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007154151.23245-1-colin.king@canonical.com

drm/i915/vbt: Child device size remains unchanged through VBT 229

The latest documented version of the VBT is 229, but no further data has
been added to the child device definition in block 2.  Update the child
device version test to eliminate the "Expected child device config size
for VBT version XXX not known; assuming 39" debug messages from the
logs.

Bspec: 20124
Bspec: 20157
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002192258.1013-1-matthew.d.roper@intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/perf: move perf types to their own header

Following a pattern used throughout the driver.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909093116.7747-7-lionel.g.landwerlin@intel.com

drm/i915/gt: Restore dropped 'interruptible' flag

Lost in the rebasing was Tvrtko's reminder that we need to keep an
uninterruptible wait around for the Ironlake VT-d w/a

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006165002.30312-3-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20191007

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: move gmbus setup down to intel_modeset_init()

Pair the gmbus setup and teardown in the same layer. This also fixes the
double gmbus teardown on the i915_driver_modeset_probe() error path.

Move the gmbus setup a bit later in the sequence to make the follow-up
refactoring easier, and to pinpoint any unexpected consequences of this
change right here, instead of the later refactoring.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-3-jani.nikula@intel.com

drm/i915: split out i915_switcheroo.[ch] from i915_drv.c

Split out code related to vga switcheroo register/unregister and state
handling from i915_drv.c into new i915_switcheroo.[ch] files.

It's a bit difficult to draw the line how much to move to the new file
from i915_drv.c, but it seemed to me keeping i915_suspend_switcheroo()
and i915_resume_switcheroo() in place was the cleanest.

No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-2-jani.nikula@intel.com

drm/i915/vga: rename intel_vga_msr_write() to intel_vga_reset_io_mem()

Rename the function per Ville's suggestion. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-1-jani.nikula@intel.com

drm/i915/stolen: make the object creation interface consistent

Our other backends return an actual error value upon failure. Do the
same for stolen objects, which currently just return NULL on failure.

Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004170452.15410-2-matthew.auld@intel.com

drm/i915: Implement a better i945gm vblank irq vs. C-states workaround

The current "disable C3+" workaround for the delayed vblank
irqs on i945gm no longer works. I'm not sure what changed, but
now I need to also disable C2. I also got my hands on a i915gm
machine that suffers from the same issue.

After some furious poking of registers I managed to find a
better workaround: The "Do not Turn off Core Render Clock in C
states" bit. With that I no longer have to disable any C-states,
and as a nice bonus the power cost is only ~1/4 of the
"disable C3+" method (which mind you doesn't even work anymore,
and so would have an even higher power cost if we made it work
by also disabling C2).

So let's throw out all the cpuidle/qos crap and just toggle
the magic bit as needed. And we extend the workaround to cover
i915gm as well.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003140231.24408-1-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Drop struct_mutex from around GEM initialisation

We no longer need to placate lockdep by holding struct_mutex for our
initialisation, so don't.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-21-chris@chris-wilson.co.uk

drm/i915/selftests: Drop vestigal struct_mutex guards

We no longer need struct_mutex to serialise request emission, so remove
it from the gt selftests.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-20-chris@chris-wilson.co.uk

drm/i915: Drop struct_mutex from suspend state save/restore

struct_mutex provides no serialisation of the registers and data
structures being saved and restored across suspend/resume. It is
completely superfluous here.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-19-chris@chris-wilson.co.uk

drm/i915: Remove struct_mutex guard for debugfs/opregion

Having a struct_mutex around the read of a BIOS blob serves no purpose.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-18-chris@chris-wilson.co.uk

drm/i915: Drop struct_mutex guard from debugfs/framebuffer_info

It protects nothing being accessed for the intel_framebuffer, so it's
own locking had better be sufficient.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-17-chris@chris-wilson.co.uk

drm/i915/overlay: Drop struct_mutex guard

The overlay uses the modeset mutex to control itself and only required
the struct_mutex for requests, which is now obsolete.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-16-chris@chris-wilson.co.uk

drm/i915: Move context management under GEM

Keep track of the GEM contexts underneath i915->gem.contexts and assign
them their own lock for the purposes of list management.

v2: Focus on lock tracking; ctx->vm is protected by ctx->mutex
v3: Correct split with removal of logical HW ID

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-15-chris@chris-wilson.co.uk

drm/i915: Remove logical HW ID

With the introduction of ctx->engines[] we allow multiple logical
contexts to be used on the same engine (e.g. with virtual engines).
According to bspec, aach logical context requires a unique tag in order
for context-switching to occur correctly between them. [Simple
experiments show that it is not so easy to trick the HW into performing
a lite-restore with matching logical IDs, though my memory from early
Broadwell experiments do suggest that it should be generating
lite-restores.]

We only need to keep a unique tag for the active lifetime of the
context, and for as long as we need to identify that context. The HW
uses the tag to determine if it should use a lite-restore (why not the
LRCA?) and passes the tag back for various status identifies. The only
status we need to track is for OA, so when using perf, we assign the
specific context a unique tag.

v2: Calculate required number of tags to fill ELSP.

Fixes: 976b55f0e1db ("drm/i915: Allow a context to define its set of engines")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111895
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-14-chris@chris-wilson.co.uk

drm/i915: Move global activity tracking from GEM to GT

As our global unpark/park keep track of the number of active users, we
can simply move the accounting from the GEM layer to the base GT layer.
It was placed originally inside GEM to benefit from the 100ms extra
delay on idleness, but that has been eliminated and now there is no
substantive difference between the layers. In moving it, we move another
piece of the puzzle out from underneath struct_mutex.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-13-chris@chris-wilson.co.uk

drm/i915: Move request runtime management onto gt

Requests are run from the gt and are tided into the gt runtime power
management, so pull the runtime request management under gt/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-12-chris@chris-wilson.co.uk

drm/i915/gem: Retire directly for mmap-offset shrinking

Now that we can retire without taking struct_mutex, we can do so to
handle shrinking the mmap-offset space after an allocation failure.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-11-chris@chris-wilson.co.uk

drm/i915: Merge wait_for_timelines with retire_request

wait_for_timelines is essentially the same loop as retiring requests
(with an extra timeout), so merge the two into one routine.

v2: i915_retire_requests_timeout and keep VT'd w/a as !interruptible

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-10-chris@chris-wilson.co.uk

drm/i915: Remove the GEM idle worker

Nothing inside the idle worker now requires struct_mutex, so we can
remove the indirection of using our own worker.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-9-chris@chris-wilson.co.uk

drm/i915: Drop struct_mutex from around i915_retire_requests()

We don't need to hold struct_mutex now for retiring requests, so drop it
from i915_retire_requests() and i915_gem_wait_for_idle(), finally
removing I915_WAIT_LOCKED for good.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-8-chris@chris-wilson.co.uk

drm/i915: Move idle barrier cleanup into engine-pm

Now that we now longer need to guarantee that the active callback is
under the struct_mutex, we can lift it out of the i915_gem_park() and
into the engine parking itself.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-7-chris@chris-wilson.co.uk

drm/i915: Coordinate i915_active with its own mutex

Forgo the struct_mutex serialisation for i915_active, and interpose its
own mutex handling for active/retire.

This is a multi-layered sleight-of-hand. First, we had to ensure that no
active/retire callbacks accidentally inverted the mutex ordering rules,
nor assumed that they were themselves serialised by struct_mutex. More
challenging though, is the rule over updating elements of the active
rbtree. Instead of the whole i915_active now being serialised by
struct_mutex, allocations/rotations of the tree are serialised by the
i915_active.mutex and individual nodes are serialised by the caller
using the i915_timeline.mutex (we need to use nested spinlocks to
interact with the dma_fence callback lists).

The pain point here is that instead of a single mutex around execbuf, we
now have to take a mutex for active tracker (one for each vma, context,
etc) and a couple of spinlocks for each fence update. The improvement in
fine grained locking allowing for multiple concurrent clients
(eventually!) should be worth it in typical loads.

v2: Add some comments that barely elucidate anything :(

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-6-chris@chris-wilson.co.uk

drm/i915: Push the i915_active.retire into a worker

As we need to use a mutex to serialise i915_active activation
(because we want to allow the callback to sleep), we need to push the
i915_active.retire into a worker callback in case we get need to retire
from an atomic context.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-5-chris@chris-wilson.co.uk

drm/i915: Pull i915_vma_pin under the vm->mutex

Replace the struct_mutex requirement for pinning the i915_vma with the
local vm->mutex instead. Note that the vm->mutex is tainted by the
shrinker (we require unbinding from inside fs-reclaim) and so we cannot
allocate while holding that mutex. Instead we have to preallocate
workers to do allocate and apply the PTE updates after we have we
reserved their slot in the drm_mm (using fences to order the PTE writes
with the GPU work and with later unbind).

In adding the asynchronous vma binding, one subtle requirement is to
avoid coupling the binding fence into the backing object->resv. That is
the asynchronous binding only applies to the vma timeline itself and not
to the pages as that is a more global timeline (the binding of one vma
does not need to be ordered with another vma, nor does the implicit GEM
fencing depend on a vma, only on writes to the backing store). Keeping
the vma binding distinct from the backing store timelines is verified by
a number of async gem_exec_fence and gem_exec_schedule tests. The way we
do this is quite simple, we keep the fence for the vma binding separate
and only wait on it as required, and never add it to the obj->resv
itself.

Another consequence in reducing the locking around the vma is the
destruction of the vma is no longer globally serialised by struct_mutex.
A natural solution would be to add a kref to i915_vma, but that requires
decoupling the reference cycles, possibly by introducing a new
i915_mm_pages object that is own by both obj->mm and vma->pages.
However, we have not taken that route due to the overshadowing lmem/ttm
discussions, and instead play a series of complicated games with
trylocks to (hopefully) ensure that only one destruction path is called!

v2: Add some commentary, and some helpers to reduce patch churn.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-4-chris@chris-wilson.co.uk

drm/i915: Mark up address spaces that may need to allocate

Since we cannot allocate underneath the vm->mutex (it is used in the
direct-reclaim paths), we need to shift the allocations off into a
mutexless worker with fence recursion prevention. To know when we need
this protection, we mark up the address spaces that do allocate before
insertion. In the future, we may wish to extend the async bind scheme to
more than just allocations.

v2: s/vm->bind_alloc/vm->bind_async_flags/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-3-chris@chris-wilson.co.uk

drm/i915: Only track bound elements of the GTT

The premise here is to simply avoiding having to acquire the vm->mutex
inside vma create/destroy to update the vm->unbound_lists, to avoid some
nasty lock recursions later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-2-chris@chris-wilson.co.uk

drm/i915: Use helpers for drm_mm_node booleans

A subset of 71724f708997 ("drm/mm: Use helpers for drm_mm_node booleans")
in order to prepare drm-intel-next-queued for subsequent patches before
we can backmerge 71724f708997 itself.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004142226.13711-1-chris@chris-wilson.co.uk

drm/i915: Restrict L3 remapping sysfs interface to dwords

The L3 cache remapping is stored as u32 elements, and we should ensure
that the user only supplies complete slice information(u32).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004105958.1741-1-chris@chris-wilson.co.uk

drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms

The CDCLK>=2*BCLK constraint applies to all generations since gen10.
Extend the constraint logic in audio get/put_power().

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003085531.30990-2-kai.vehmanen@linux.intel.com

drm/i915: Fix audio power up sequence for gen10+ display

On platfroms with gen10+ display, driver must set the enable bit of
AUDIO_PIN_BUF_CTL register before transactions with the HDA controller
can proceed. Add setting this bit to the audio power up sequence.

Failing to do this resulted in errors during display audio codec probe,
and failures during resume from suspend.

Note: We may also need to disable the bit afterwards, but there are
still unresolved issues with that.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111214
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003085531.30990-1-kai.vehmanen@linux.intel.com

drm/i915/dp: remove static variable for aux last status

Add aux_busy_last_status to intel_dp. Don't bother with initializing to
all ones; the only difference is potentially missing logging for one
error case if the readout is all zeros.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002144138.7917-1-jani.nikula@intel.com

drm/i915/execlists: Skip redundant resubmission

If we unwind the active requests, and on resubmission discover that we
intend to preempt the active contexts with themselves, simply skip the
ELSP submission.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003210100.22250-1-chris@chris-wilson.co.uk

drm/i915/tgl: Add the Thunderbolt PLL divider values

The Thunderbolt PLL divider values on TGL differ from the ICL ones,
update the PLL parameter calculation function accordingly.

Bspec: 49204

v2:
- Remove unused refclk config. (José)

Cc: Jose Souza <jose.souza@intel.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Mika Westerberg <mika.westerberg@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jose Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002204108.32242-1-imre.deak@intel.com

drm/i915: use DRM_DEBUG_KMS() instead of drm_dbg(DRM_UT_KMS, ...)

Unify on current common usage to allow repurposing drm_dbg() later. Fix
newlines while at it.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002145405.27848-2-jani.nikula@intel.com

drm/i915: use DRM_ERROR() instead of drm_err()

Unify on current common usage to allow repurposing drm_err() later. Fix
newlines while at it.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002145405.27848-1-jani.nikula@intel.com

drm/i915/selftests: Exercise potential false lite-restore

If execlists's lite-restore is based on the common GEM context tag
rather than the per-intel_context LRCA, then a context switch between
two intel_contexts on the same engine derived from the same GEM context
will perform a lite-restore instead of a full context switch. We can
exploit this by poisoning the ringbuffer of the first context and trying
to trick a simple RING_TAIL update (i.e. lite-restore)

v2: Also check what happens if preempt ce[0] with ce[1] (both instances
on the same engine from the same parent context) [Tvrtko]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002183459.26614-1-chris@chris-wilson.co.uk

drm/i915/mg: Use tc_port instead of port parameter to MG registers

All the MG registers is based on the tc_port not port, so
MG_PHY_PORT_LN() was subtracting port and PORT_C what is very
fragile.
So replacing port to tc_port in all MG register macros and users
like we have for DKL.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001193729.123736-1-jose.souza@intel.com

drm/i915: Clean up encoder->crtc_mask setup

Use BIT(pipe) for better legibility when populating the crtc_mask
for encoders.

Also remove the redundant possible_crtcs setup for the TV encoder.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708162048.4286-11-ville.syrjala@linux.intel.com

drm/i915: Populate possible_crtcs correctly

Don't advertize non-exisiting crtcs in the encoder possible_crtcs
bitmask.

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708162048.4286-9-ville.syrjala@linux.intel.com

drm/i915/gem: Refactor tests on obj->ops->flags

We repeat obj->ops->flags in our object checks, so pull that into its
own little helper for clarity.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002123014.1545-1-chris@chris-wilson.co.uk

drm/i915/selftests: Extract random_offset() for use with a prng

For selftests, we desire repeatability and so prefer using a prng with
known seed over true randomness. Extract random_offset() as a selftest
utility that can take the prng state.

Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002122430.23205-1-chris@chris-wilson.co.uk

drm/i915: Fix g4x sprite scaling stride check with GTT remapping

I forgot to update the g4x sprite scaling stride check when GTT
remapping was introduced. The stride of the original framebuffer
is irrelevant when remapping is used and instead we want to check
the stride of the remapped view.

Also drop the duplicate width_bytes check. We already check that
a few lines earlier.

Fixes: df79cf441910 ("drm/i915: Store the final plane stride in plane_state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930183045.662-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Polish intel_tv_mode_valid()

Drop the tv_mode NULL check since intel_tv_mode_find() never
actually returns NULL, and flip the condition around so that
the MODE_OK case is at the end, which is customary to all
the other .mode_valid() implementations.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001154629.11063-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Limit MST modes based on plane size too

When adding the max plane size checks to the .mode_valid() hooks
I naturally forgot about MST. Take care of that one as well.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 2d20411e25a3 ("drm/i915: Don't advertise modes that exceed the max plane size")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001154629.11063-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/display: abstract all vgaarb access to intel_vga.[ch]

Split out the code related to vga client and vgaarb all over the place
into new intel_vga.[ch]. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001152506.7854-1-jani.nikula@intel.com

drm/i915/userptr: Never allow userptr into the mappable GGTT

Daniel Vetter uncovered a nasty cycle in using the mmu-notifiers to
invalidate userptr objects which also happen to be pulled into GGTT
mmaps. That is when we unbind the userptr object (on mmu invalidation),
we revoke all CPU mmaps, which may then recurse into mmu invalidation.

We looked for ways of breaking the cycle, but the revocation on
invalidation is required and cannot be avoided. The only solution we
could see was to not allow such GGTT bindings of userptr objects in the
first place. In practice, no one really wants to use a GGTT mmapping of
a CPU pointer...

Just before Daniel's explosive lockdep patches land in v5.4-rc1, we got
a genuine blip from CI:

<4>[  246.793958] ======================================================
<4>[  246.793972] WARNING: possible circular locking dependency detected
<4>[  246.793989] 5.3.0-gbd6c56f50d15-drmtip_372+ #1 Tainted: G     U
<4>[  246.794003] ------------------------------------------------------
<4>[  246.794017] kswapd0/145 is trying to acquire lock:
<4>[  246.794030] 000000003f565be6 (&dev->struct_mutex/1){+.+.}, at: userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[  246.794250]
                  but task is already holding lock:
<4>[  246.794263] 000000001799cef9 (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe6/0x2a0
<4>[  246.794291]
                  which lock already depends on the new lock.

<4>[  246.794307]
                  the existing dependency chain (in reverse order) is:
<4>[  246.794322]
                  -> #3 (&anon_vma->rwsem){++++}:
<4>[  246.794344]        down_write+0x33/0x70
<4>[  246.794357]        __vma_adjust+0x3d9/0x7b0
<4>[  246.794370]        __split_vma+0x16a/0x180
<4>[  246.794385]        mprotect_fixup+0x2a5/0x320
<4>[  246.794399]        do_mprotect_pkey+0x208/0x2e0
<4>[  246.794413]        __x64_sys_mprotect+0x16/0x20
<4>[  246.794429]        do_syscall_64+0x55/0x1c0
<4>[  246.794443]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  246.794456]
                  -> #2 (&mapping->i_mmap_rwsem){++++}:
<4>[  246.794478]        down_write+0x33/0x70
<4>[  246.794493]        unmap_mapping_pages+0x48/0x130
<4>[  246.794519]        i915_vma_revoke_mmap+0x81/0x1b0 [i915]
<4>[  246.794519]        i915_vma_unbind+0x11d/0x4a0 [i915]
<4>[  246.794519]        i915_vma_destroy+0x31/0x300 [i915]
<4>[  246.794519]        __i915_gem_free_objects+0xb8/0x4b0 [i915]
<4>[  246.794519]        drm_file_free.part.0+0x1e6/0x290
<4>[  246.794519]        drm_release+0xa6/0xe0
<4>[  246.794519]        __fput+0xc2/0x250
<4>[  246.794519]        task_work_run+0x82/0xb0
<4>[  246.794519]        do_exit+0x35b/0xdb0
<4>[  246.794519]        do_group_exit+0x34/0xb0
<4>[  246.794519]        __x64_sys_exit_group+0xf/0x10
<4>[  246.794519]        do_syscall_64+0x55/0x1c0
<4>[  246.794519]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  246.794519]
                  -> #1 (&vm->mutex){+.+.}:
<4>[  246.794519]        i915_gem_shrinker_taints_mutex+0x6d/0xe0 [i915]
<4>[  246.794519]        i915_address_space_init+0x9f/0x160 [i915]
<4>[  246.794519]        i915_ggtt_init_hw+0x55/0x170 [i915]
<4>[  246.794519]        i915_driver_probe+0xc9f/0x1620 [i915]
<4>[  246.794519]        i915_pci_probe+0x43/0x1b0 [i915]
<4>[  246.794519]        pci_device_probe+0x9e/0x120
<4>[  246.794519]        really_probe+0xea/0x3d0
<4>[  246.794519]        driver_probe_device+0x10b/0x120
<4>[  246.794519]        device_driver_attach+0x4a/0x50
<4>[  246.794519]        __driver_attach+0x97/0x130
<4>[  246.794519]        bus_for_each_dev+0x74/0xc0
<4>[  246.794519]        bus_add_driver+0x13f/0x210
<4>[  246.794519]        driver_register+0x56/0xe0
<4>[  246.794519]        do_one_initcall+0x58/0x300
<4>[  246.794519]        do_init_module+0x56/0x1f6
<4>[  246.794519]        load_module+0x25bd/0x2a40
<4>[  246.794519]        __se_sys_finit_module+0xd3/0xf0
<4>[  246.794519]        do_syscall_64+0x55/0x1c0
<4>[  246.794519]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  246.794519]
                  -> #0 (&dev->struct_mutex/1){+.+.}:
<4>[  246.794519]        __lock_acquire+0x15d8/0x1e90
<4>[  246.794519]        lock_acquire+0xa6/0x1c0
<4>[  246.794519]        __mutex_lock+0x9d/0x9b0
<4>[  246.794519]        userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[  246.794519]        __mmu_notifier_invalidate_range_start+0x85/0x110
<4>[  246.794519]        try_to_unmap_one+0x76b/0x860
<4>[  246.794519]        rmap_walk_anon+0x104/0x280
<4>[  246.794519]        try_to_unmap+0xc0/0xf0
<4>[  246.794519]        shrink_page_list+0x561/0xc10
<4>[  246.794519]        shrink_inactive_list+0x220/0x440
<4>[  246.794519]        shrink_node_memcg+0x36e/0x740
<4>[  246.794519]        shrink_node+0xcb/0x490
<4>[  246.794519]        balance_pgdat+0x241/0x580
<4>[  246.794519]        kswapd+0x16c/0x530
<4>[  246.794519]        kthread+0x119/0x130
<4>[  246.794519]        ret_from_fork+0x24/0x50
<4>[  246.794519]
                  other info that might help us debug this:

<4>[  246.794519] Chain exists of:
                    &dev->struct_mutex/1 --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem

<4>[  246.794519]  Possible unsafe locking scenario:

<4>[  246.794519]        CPU0                    CPU1
<4>[  246.794519]        ----                    ----
<4>[  246.794519]   lock(&anon_vma->rwsem);
<4>[  246.794519]                                lock(&mapping->i_mmap_rwsem);
<4>[  246.794519]                                lock(&anon_vma->rwsem);
<4>[  246.794519]   lock(&dev->struct_mutex/1);
<4>[  246.794519]
                   *** DEADLOCK ***

v2: Say no to mmap_ioctl

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111744
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111870
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190928082546.3473-1-chris@chris-wilson.co.uk

drm/i915/dp: Fix DP MST error after unplugging TypeC cable

This patch avoids DP MST payload error message in dmesg, as it is trying
to update the payload to the disconnected DP MST device. After DP MST
device is disconnected we should not be updating the payload and
hence remove the error.

v2: Removed the connector status check and converted from error to debug.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Signed-off-by: Srinivasan S <srinivasan.s@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1569371742-109402-1-git-send-email-srinivasan.s@intel.com

drm/i915: Initialise breadcrumb lists on the virtual engine

With deferring the breadcrumb signalling to the virtual engine (thanks
preempt-to-busy) we need to make sure the lists and irq-worker are ready
to send a signal.

[41958.710544] BUG: kernel NULL pointer dereference, address: 0000000000000000
[41958.710553] #PF: supervisor write access in kernel mode
[41958.710556] #PF: error_code(0x0002) - not-present page
[41958.710558] PGD 0 P4D 0
[41958.710562] Oops: 0002 [#1] SMP
[41958.710565] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G     U            5.3.0+ #207
[41958.710568] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[41958.710602] RIP: 0010:i915_request_enable_breadcrumb+0xe1/0x130 [i915]
[41958.710605] Code: 8b 44 24 30 48 89 41 08 48 89 08 48 8b 85 98 01 00 00 48 8d 8d 90 01 00 00 48 89 95 98 01 00 00 49 89 4c 24 28 49 89 44 24 30 <48> 89 10 f0 80 4b 30 10 c6 85 88 01 00 00 00 e9 1a ff ff ff 48 83
[41958.710609] RSP: 0018:ffffc90000003de0 EFLAGS: 00010046
[41958.710612] RAX: 0000000000000000 RBX: ffff888735424480 RCX: ffff8887cddb2190
[41958.710614] RDX: ffff8887cddb3570 RSI: ffff888850362190 RDI: ffff8887cddb2188
[41958.710617] RBP: ffff8887cddb2000 R08: ffff8888503624a8 R09: 0000000000000100
[41958.710619] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8887cddb3548
[41958.710622] R13: 0000000000000000 R14: 0000000000000046 R15: ffff888850362070
[41958.710625] FS:  0000000000000000(0000) GS:ffff88885ea00000(0000) knlGS:0000000000000000
[41958.710628] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[41958.710630] CR2: 0000000000000000 CR3: 0000000002c09002 CR4: 00000000001606f0
[41958.710633] Call Trace:
[41958.710636]  <IRQ>
[41958.710668]  __i915_request_submit+0x12b/0x160 [i915]
[41958.710693]  virtual_submit_request+0x67/0x120 [i915]
[41958.710720]  __unwind_incomplete_requests+0x131/0x170 [i915]
[41958.710744]  execlists_dequeue+0xb40/0xe00 [i915]
[41958.710771]  execlists_submission_tasklet+0x10f/0x150 [i915]
[41958.710776]  tasklet_action_common.isra.17+0x41/0xa0
[41958.710781]  __do_softirq+0xc8/0x221
[41958.710785]  irq_exit+0xa6/0xb0
[41958.710788]  smp_apic_timer_interrupt+0x4d/0x80
[41958.710791]  apic_timer_interrupt+0xf/0x20
[41958.710794]  </IRQ>

Fixes: cb2377a919bb ("drm/i915: Fixup preempt-to-busy vs reset of a virtual request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001103518.9113-1-chris@chris-wilson.co.uk

drm/i915/gt: Only unwedge if we can reset first

Unwedging the GPU requires a successful GPU reset before we restore the
default submission, or else we may see residual context switch events
that we were not expecting.

v2: Pull in the special-case reset_clobbers_display, and explain why it
should be safe in the context of unwedging.

v3: Just forget all about resets before unwedging if it will clobber the
display; risk it all.

Reported-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190927160335.10622-1-chris@chris-wilson.co.uk

drm/i915/selftests: Exercise context switching in parallel

We currently test context switching on each engine as a basic stress
test (just verifying that nothing explodes if we execute 2 requests from
different contexts sequentially). What we have not tested is what
happens if we try and do so on all available engines simultaneously,
putting our SW and the HW under the maximal stress.

v2: Clone the set of engines from the first context into the secondary
contexts.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930144919.27992-1-chris@chris-wilson.co.uk

drm/i915/selftests: Provide a mock GPU reset routine

For those mock tests that may wish to pretend triggering a GPU reset and
processing the cleanup.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927211749.2181-3-chris@chris-wilson.co.uk

drm/i915/selftests: Distinguish mock device from no wakeref

On systems that have no runtime-pm, we mark the wakeref as being -1. We
therefore cannot use that value for the mock-gt indicator, so opt for
-ENODEV instead. The wakeref should never be an error value -- one
hopes!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927211749.2181-2-chris@chris-wilson.co.uk

drm/i915: Pass intel_gt to has-reset?

As we execute GPU resets on a gt/ basis, and use the intel_gt as the
primary for all other reset functions, also use it for the has-reset?
predicates. Gradually simplifying the churn of pointers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927211749.2181-1-chris@chris-wilson.co.uk

drm/i915/selftests: Do not try to sanitize mock HW

If we are mocking the device, skip trying to sanitize the pm HW state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927210646.29664-1-chris@chris-wilson.co.uk

drm/i915: simplify i915_gem_init_early

i915_gem_init_early doesn't need to return anything.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927173409.31175-3-matthew.auld@intel.com

drm/i915: check for kernel_context

Explosions during early driver init on the error path. Make sure we fail
gracefully.

[ 9547.672258] BUG: kernel NULL pointer dereference, address: 000000000000007c
[ 9547.672288] #PF: supervisor read access in kernel mode
[ 9547.672292] #PF: error_code(0x0000) - not-present page
[ 9547.672296] PGD 8000000846b41067 P4D 8000000846b41067 PUD 797034067 PMD 0
[ 9547.672303] Oops: 0000 [#1] SMP PTI
[ 9547.672307] CPU: 1 PID: 25634 Comm: i915_selftest Tainted: G     U            5.3.0-rc8+ #73
[ 9547.672313] Hardware name:  /NUC6i7KYB, BIOS KYSKLi70.86A.0050.2017.0831.1924 08/31/2017
[ 9547.672395] RIP: 0010:intel_context_unpin+0x9/0x100 [i915]
[ 9547.672400] Code: 6b 60 00 e9 17 ff ff ff bd fc ff ff ff e9 7c ff ff ff 66 66 2e 0f 1f 84 00 00 00 00
 00 0f 1f 40 00 0f 1f 44 00 00 41 54 55 53 <8b> 47 7c 83 f8 01 74 26 8d 48 ff f0 0f b1 4f 7c 48 8d 57 7c
 75 05
[ 9547.672413] RSP: 0018:ffffae8ac24ff878 EFLAGS: 00010246
[ 9547.672417] RAX: ffff944a1b7842d0 RBX: ffff944a1b784000 RCX: ffff944a12dd6fa8
[ 9547.672422] RDX: ffff944a1b7842c0 RSI: ffff944a12dd5328 RDI: 0000000000000000
[ 9547.672428] RBP: 0000000000000000 R08: ffff944a11e5d840 R09: 0000000000000000
[ 9547.672433] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 9547.672438] R13: ffffffffc11aaf00 R14: 00000000ffffffe4 R15: ffff944a0e29bf38
[ 9547.672443] FS:  00007fc259b88ac0(0000) GS:ffff944a1f880000(0000) knlGS:0000000000000000
[ 9547.672449] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9547.672454] CR2: 000000000000007c CR3: 0000000853346003 CR4: 00000000003606e0
[ 9547.672459] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9547.672464] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9547.672469] Call Trace:
[ 9547.672518]  intel_engine_cleanup_common+0xe3/0x270 [i915]
[ 9547.672567]  execlists_destroy+0xe/0x30 [i915]
[ 9547.672669]  intel_engines_init+0x94/0xf0 [i915]
[ 9547.672749]  i915_gem_init+0x191/0x950 [i915]

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927173409.31175-2-matthew.auld@intel.com

drm/i915/tgl: initialize TC and TBT ports

Now that TC support was added, initialize DDIs.

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-4-jose.souza@intel.com

drm/i915/tgl: Fix dkl link training

Link training is failling when running link at 2.7GHz and 1.62GHz and
following BSpec pll algorithm.

Comparing the values calculated and the ones from the reference table
it looks like MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO should not always set
to 5. For DP ports ICL mg pll algorithm sets it to 10 or 5 based on
div2 value, that matches with dkl hardcoded table.

So implementing this way as it proved to work in HW and leaving a
comment so we know why it do not match BSpec.

v4:
Using the same is_dp check as ICL, need testing on HDMI over tc port

Issue reported on BSpec 49204.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-3-jose.souza@intel.com

drm/i915/tgl: Add dkl phy programming sequences

Added DKL Phy sequences and helpers functions to program voltage
swing, clock gating and dp mode.

It is not written in DP enabling sequence but "PHY Clockgating
programming" states that clock gating should be enabled after the
link training but doing so causes all the following trainings to fail
so not enabling it for.

v2:
Setting the right HIP_INDEX_REG bits (José)

v3:
Adding the meaning of each column of tgl_dkl_phy_ddi_translations
Adding if gen >= 12 on intel_ddi_hdmi_level() and
intel_ddi_pre_enable_hdmi() instead of reuse part of gen >= 11 if

v4:
Moved the DP_MODE lane programing to another patch as ICL also
needed it
Sharing icl_phy_set_clock_gating() and icl_program_mg_dp_mode() with
TGL as bits and programing as now it almost identical to ICL

BSpec: 49292
BSpec: 49190

Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-2-jose.souza@intel.com

drm/i915/tc: Update DP_MODE programming

BSpec was updated(r146548) with a new MG_DP_MODE Programming table,
now taking in consideration the pin assignment and allowing us to
optimize power by shutting down available but not needed lanes.

It was tested on ICL and TGL, with adaptors that used pin assignment
C and B, reversing the connector and going to different modes testing
the not needed lane shutdown.

v5:
Using crtc_state->lane_count instead of dp.lane_count

BSpec: 21735
BSpec: 49292

Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-1-jose.souza@intel.com

drm/i915/dmc: Update ICL DMC version to v1.09

We have a new version of DMC for ICL - v1.09.

This version adds the Half Refresh Rate capability
into DMC.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925201250.18136-1-daniele.ceraolospurio@intel.com

drm/i915/huc: fix version parsing from CSS header

The HuC FW has silently switched to encoding the version the same way as
the GuC FW does, i.e. major.minor.patch instead of just major.minor. All
the current blobs follow the new scheme, but since minor and patch are
both zero there is no difference in the end results and we happily load
them. New binaries, however, will have non-zero values in there, so we
need to make sure to parse them correctly.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925222121.4000-1-daniele.ceraolospurio@intel.com

drm/i915: Update DRIVER_DATE to 20190927

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Extract GT render sleep (rc6) management

Continuing the theme of breaking intel_pm.c up in a reasonable chunk of
powermanagement utilities, pull out the rc6 setup into its GT handler.

Based on a patch by Chris Wilson.

Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919143840.20384-1-andi.shyti@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190927110849.28734-1-chris@chris-wilson.co.uk

drm/i915/selftests: Exercise concurrent submission to all engines

The simplest and most maximal submission we can do, a thread to submit
requests unto each engine.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925193446.26007-1-chris@chris-wilson.co.uk

drm/i915: Add definitions for MI_MATH command

We can use it in i915 for updating parts of unmasked registers from
within a batch. We're also adding Gen8+ versions of CS_GPR registers
(aka MI_MATH_REG in the coprocessor).

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926100635.9416-4-michal.winiarski@intel.com