target/hexagon: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230227135202.9710-25-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hppa: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-24-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-23-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/loongarch: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-22-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/microblaze: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-21-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-20-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/openrisc: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-19-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-18-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-17-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sh4: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-16-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-15-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/tricore: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-14-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Replace `tb_pc()` with `tb->pc`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-13-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Move jmp-cache `CF_PCREL` checks to caller

tb-jmp-cache.h contains a few small functions that only exist to hide a
CF_PCREL check, however the caller often already performs such a check.

This patch moves CF_PCREL checks from the callee to the caller, and also
removes these functions which now only hide an access of the jmp-cache.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-12-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Remove `TARGET_TB_PCREL` define

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-11-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Remove `TARGET_TB_PCREL` define

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-10-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec: Remove `TARGET_TB_PCREL` define

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-9-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Replace `TARGET_TB_PCREL` with `CF_PCREL`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-8-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Replace `TARGET_TB_PCREL` with `CF_PCREL`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-7-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec: Replace `TARGET_TB_PCREL` with `CF_PCREL`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-6-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Replace `TARGET_TB_PCREL` with `CF_PCREL`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-5-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: set `CF_PCREL` in `arm_cpu_realizefn`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: set `CF_PCREL` in `x86_cpu_realizefn`

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-3-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec: Introduce `CF_PCREL`

Adds a new field to TranslationBlock.cflags denoting whether or not the
instructions of a given translation block are pc-relative. This field
aims to replace the macro `TARGET_TB_PCREL`.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-2-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Add 'size' param to probe_access_full

Change to match the recent change to probe_access_flags.
All existing callers updated to supply 0, so no change in behaviour.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Add 'size' param to probe_access_flags()

probe_access_flags() as it is today uses probe_access_full(), which in
turn uses probe_access_internal() with size = 0. probe_access_internal()
then uses the size to call the tlb_fill() callback for the given CPU.
This size param ('fault_size' as probe_access_internal() calls it) is
ignored by most existing .tlb_fill callback implementations, e.g.
arm_cpu_tlb_fill(), ppc_cpu_tlb_fill(), x86_cpu_tlb_fill() and
mips_cpu_tlb_fill() to name a few.

But RISC-V riscv_cpu_tlb_fill() actually uses it. The 'size' parameter
is used to check for PMP (Physical Memory Protection) access. This is
necessary because PMP does not make any guarantees about all the bytes
of the same page having the same permissions, i.e. the same page can
have different PMP properties, so we're forced to make sub-page range
checks. To allow RISC-V emulation to do a probe_acess_flags() that
covers PMP, we need to either add a 'size' param to the existing
probe_acess_flags() or create a new interface (e.g.
probe_access_range_flags).

There are quite a few probe_* APIs already, so let's add a 'size' param
to probe_access_flags() and re-use this API. This is done by open coding
what probe_access_full() does inside probe_acess_flags() and passing the
'size' param to probe_acess_internal(). Existing probe_access_flags()
callers use size = 0 to not change their current API usage. 'size' is
asserted to enforce single page access like probe_access() already does.

No behavioral changes intended.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230223234427.521114-2-dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softmmu: Use memmove in flatview_write_continue

We found a case where the source passed to flatview_write_continue() may
overlap with the destination when fuzzing igb, a new proposed network
device with sanitizers.

igb uses pci_dma_map() to get Tx packet, and pci_dma_write() to write Rx
buffer. While pci_dma_write() is usually used to write data from
memory not mapped to the guest, if igb is configured to perform
loopback, the data will be sourced from the guest memory. The source and
destination can overlap and the usage of memcpy() will be invalid in
such a case.

While we do not really have to deal with such an invalid request for
igb, detecting the overlap in igb code beforehand requires complex code,
and only covers this specific case. Instead, just replace memcpy() with
memmove() to tolerate overlaps. Using memmove() will slightly damage the
performance as it will need to check overlaps before using SIMD
instructions for copying, but the cost should be negligible, considering
the inherent complexity of flatview_write_continue().

The test cases generated by the fuzzer is available at:
https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/

The fixed test case is:
fuzz/crash_47dfe62d9f911bf523ff48cd441b61c0013ed805

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230131030155.18932-1-akihiko.odaki@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

exec/helper-head: Include missing "fpu/softfloat-types.h" header

'dh_ctype_f32' is defined as 'float32', itself declared
in "fpu/softfloat-types.h". Include this header to avoid
when refactoring other headers:

  In file included from include/exec/helper-proto.h:7,
                   from include/tcg/tcg-op.h:29,
                   from ../../tcg/tcg-op-vec.c:22:
  include/exec/helper-head.h:44:22: error: unknown type name ‘float32’; did you mean ‘_Float32’?
     44 | #define dh_ctype_f32 float32
        |                      ^~~~~~~

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216225202.25664-1-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'buildsys-qom-qdev-ui-20230227' of https://github.com/philmd/qemu into staging

- buildsys
  - Various header cleaned up (removing pointless headers)
  - Mark various files/code user/system specific
  - Make various objects target-independent
  - Remove tswapN() calls from dump.o
  - Suggest g_assert_not_reached() instead of assert(0)

- qdev / qom
  - Replace various container_of() by QOM cast macros
  - Declare some QOM macros using OBJECT_DECLARE_TYPE()
  - Embed OHCI QOM child in SM501 chipset

- hw (ISA & IDE)
  - add some documentation, improve function names
  - un-inline, open-code few functions
  - have ISA API accessing IRQ/DMA prefer ISABus over ISADevice
  - Demote IDE subsystem maintenance to "Odd Fixes"

- ui: Improve Ctrl+Alt hint on Darwin Cocoa

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmP9IeAACgkQ4+MsLN6t
# wN7bdQ//SxJYJuQvqTT6s+O0LmP6NbqvhxCXX7YAwK2jCTM+zTgcqqRZCcisLQol
# 3ENu2UhnZmiLKHSOxatOVozbws08/u8Vl+WkW4UTMUb1yo5KPaPtq808Y95RdAJB
# 7D7B5juDGnFRAHXZz38zVk9uIuEkm+Po/pD0JQa+upBtAAgOJTqGavDNSR5+T0Yl
# VjGdwK0b10skPqiF6OABYoy/4IFHVJJFIbARZh+a7hrF0llsbzUts5JiYsOxEEHQ
# t3woUItdMnS1m0+Ty4AQ8m0Yv9y4HZOIzixvsZ+vChj5ariwUhL9/7wC/s/UCYEg
# gKVA5X8R6n/ME6DScK99a+CyR/MXkz70b/rOUZxoutXhV3xdh4X1stL4WN9W/m3z
# D4i4ZrUsDUcKCGWlj49of/dKbOPwk1+e/mT0oDZD6JzG0ODjfdVxvJ/JEV2iHgS3
# WqHuSKzX/20H9j7/MgfbQ0HjBFOQ8tl781vQzhD+y+cF/IiTsHhrE6esIWho4bob
# kfSdVydUWWRnBsnyGoRZXoEMX9tn+pu0nKxEDm2Bo2+jajsa0aZZPokgjxaz4MnD
# Hx+/p1E+8IuOn05JgzQSgTJmKFdSbya203tXIsTo1kL2aJTJ6QfMvgEPP/fkn+lS
# oQyVBFZmb1JDdTM1MxOncnlWLg74rp/CWEc+u5pSdbxMO/M/uac=
# =AV/+
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Feb 2023 21:34:24 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* tag 'buildsys-qom-qdev-ui-20230227' of https://github.com/philmd/qemu: (125 commits)
  ui/cocoa: user friendly characters for release mouse
  dump: Add create_win_dump() stub for non-x86 targets
  dump: Simplify compiling win_dump.o by introducing win_dump_available()
  dump: Clean included headers
  dump: Replace TARGET_PAGE_SIZE -> qemu_target_page_size()
  dump: Replace tswapN() -> cpu_to_dumpN()
  hw/ide/pci: Add PCIIDEState::isa_irq[]
  hw/ide/via: Replace magic 2 value by ARRAY_SIZE / MAX_IDE_DEVS
  hw/ide/piix: Refactor pci_piix_init_ports as pci_piix_init_bus per bus
  hw/ide/piix: Pass Error* to pci_piix_init_ports() for better error msg
  hw/ide/piix: Remove unused includes
  hw/ide/pci: Unexport bmdma_active_if()
  hw/ide/ioport: Remove unnecessary includes
  hw/ide: Declare ide_get_[geometry/bios_chs_trans] in 'hw/ide/internal.h'
  hw/ide: Rename idebus_active_if() -> ide_bus_active_if()
  hw/ide: Rename ide_init2() -> ide_bus_init_output_irq()
  hw/ide: Rename ide_exec_cmd() -> ide_bus_exec_cmd()
  hw/ide: Rename ide_register_restart_cb -> ide_bus_register_restart_cb
  hw/ide: Rename ide_create_drive() -> ide_bus_create_drive()
  hw/ide: Rename ide_set_irq() -> ide_bus_set_irq()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ui/cocoa: user friendly characters for release mouse

While mouse is grabbed, window title contains a hint for the user what
keyboard keys to press to release the mouse. Make that hint text a bit
more user friendly for a Mac user:

 - Replace "Ctrl" and "Alt" by appropriate symbols for those keyboard
   keys typically displayed for them on a Mac (encode those symbols by
   using UTF-8 characters).

 - Drop " + " in between the keys, as that's not common on macOS for
   documenting keyboard shortcuts.

 - Convert lower case "g" to upper case "G", as that's common on macOS.

 - Add one additional space at start and end of key stroke set, to
   visually separate the key strokes from the rest of the text.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <E1pAClj-0003Jo-OB@lizzy.crudebyte.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

dump: Add create_win_dump() stub for non-x86 targets

Implement the non-x86 create_win_dump(). We can remove
the last TARGET_X86_64 #ifdef'ry in dump.c, which thus
becomes target-independent. Update meson accordingly.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230225094903.53167-6-philmd@linaro.org>

dump: Simplify compiling win_dump.o by introducing win_dump_available()

To make dump.c less target dependent, move the TARGET_X86_64 #ifdef'ry
from dump.c to win_dump.c (introducing a win_dump_available() method
there). By doing so we can build win_dump.c on any target, and
simplify the meson rule.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230225094903.53167-5-philmd@linaro.org>

dump: Clean included headers

"qemu/win_dump_defs.h" is only required by win_dump.c,
but win_dump.h requires "sysemu/dump.h" which declares
the DumpState type. Remove various unused headers.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230225094903.53167-4-philmd@linaro.org>

dump: Replace TARGET_PAGE_SIZE -> qemu_target_page_size()

TARGET_PAGE_SIZE is target specific. In preparation of
making dump.c target-agnostic, replace the compile-time
TARGET_PAGE_SIZE definition by runtime qemu_target_page_size().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230225094903.53167-3-philmd@linaro.org>

dump: Replace tswapN() -> cpu_to_dumpN()

All uses of tswap in that file are wrong, and should be using
cpu_to_dumpN, which correctly tests the endianness of the output.

Reported-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230225094903.53167-2-philmd@linaro.org>

hw/ide/pci: Add PCIIDEState::isa_irq[]

These legacy ISA IRQs allow the PIIX IDE functions to be wired up in
their south bridges and the VIA IDE functions to disuse
PCI_INTERRUPT_LINE as outlined in https://lists.nongnu.org/archive/html/qemu-devel/2020-03/msg01707.html

Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230126211740.66874-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/ide/via: Replace magic 2 value by ARRAY_SIZE / MAX_IDE_DEVS

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20210511041848.2743312-5-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/ide/piix: Refactor pci_piix_init_ports as pci_piix_init_bus per bus

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-21-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/ide/piix: Pass Error* to pci_piix_init_ports() for better error msg

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-20-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/ide/piix: Remove unused includes

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-19-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/ide/pci: Unexport bmdma_active_if()

The function is only used inside ide/pci.c, so doesn't need to be exported.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-18-philmd@linaro.org>

hw/ide/ioport: Remove unnecessary includes

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-17-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/ide: Declare ide_get_[geometry/bios_chs_trans] in 'hw/ide/internal.h'

ide_get_geometry() and ide_get_bios_chs_trans() are only
used by the TYPE_PC_MACHINE.
"hw/ide.h" is a mixed bag of lost IDE declarations. In order
to remove this (almost) pointless header soon, move these
declarations to "hw/ide/internal.h".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230220091358.17038-18-philmd@linaro.org>

hw/ide: Rename idebus_active_if() -> ide_bus_active_if()

idebus_active_if() operates on a IDEBus; rename it as
ide_bus_active_if() to emphasize its first argument
is a IDEBus.

Mechanical change using:

  $ sed -i -e 's/idebus_active_if/ide_bus_active_if/g' \
        $(git grep -l idebus_active_if)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-16-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/ide: Rename ide_init2() -> ide_bus_init_output_irq()

ide_init2() initializes a IDEBus, and set its output IRQ.
To emphasize this, rename it as ide_bus_init_output_irq().

Mechanical change using:

  $ sed -i -e 's/ide_init2/ide_bus_init_output_irq/g' \
        $(git grep -l ide_init2)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-15-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/ide: Rename ide_exec_cmd() -> ide_bus_exec_cmd()

ide_exec_cmd() operates on a IDEBus; rename it as
ide_bus_exec_cmd() to emphasize its first argument
is a IDEBus.

Mechanical change using:

  $ sed -i -e 's/ide_exec_cmd/ide_bus_exec_cmd/g' \
        $(git grep -wl ide_exec_cmd)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-14-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/ide: Rename ide_register_restart_cb -> ide_bus_register_restart_cb

ide_register_restart_cb() operates on a IDEBus; rename it as
ide_bus_register_restart_cb() to emphasize its first argument
is a IDEBus.

Mechanical change using:

  $ sed -i -e 's/ide_register_restart_cb/ide_bus_register_restart_cb/g' \
    $(git grep -l ide_register_restart_cb)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-13-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/ide: Rename ide_create_drive() -> ide_bus_create_drive()

ide_create_drive() operates on a IDEBus; rename it as
ide_bus_create_drive() to emphasize its first argument
is a IDEBus.

Mechanical change using:

  $ sed -i -e 's/ide_create_drive/ide_bus_create_drive/g' \
        $(git grep -wl ide_create_drive)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-12-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/ide: Rename ide_set_irq() -> ide_bus_set_irq()

ide_set_irq() operates on a IDEBus; rename it as
ide_bus_set_irq() to emphasize its first argument
is a IDEBus.

Mechanical change using:

  $ sed -i -e 's/ide_set_irq/ide_bus_set_irq/g' \
        $(git grep -l ide_set_irq)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-11-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/ide: Un-inline ide_set_irq()

Only include "hw/irq.h" where appropriate.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-10-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/ide: Include 'exec/ioport.h' instead of 'hw/isa/isa.h'

The IDEBus structure has PortioList fields, so we need its
declarations from "exec/ioport.h". "hw/isa/isa.h" is not required.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-9-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

hw/ide: Remove unused 'qapi/qapi-types-run-state.h'

Missed in commit d7458e7754 ("hw/ide/internal: Remove unused
DMARestartFunc typedef") which removed the single use of RunState.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-8-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

hw/ide/atapi: Restrict 'scsi/constants.h' inclusion

Only atapi.c requires the SCSI constants. No need to include
it in all files including "hw/ide/internal.h".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-7-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

hw/ide/isa: Remove intermediate ISAIDEState::irq variable

The intermediate ISAIDEState::irq variable just add noise, remove it.

Message-Id: <20230215112712.23110-6-philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/ide/isa: Extract TYPE_ISA_IDE declarations to 'hw/ide/isa.h'

"hw/ide.h" is a mixed bag of lost IDE declarations.

Extract isa_ide_init() and the TYPE_ISA_IDE QOM declarations
to a new "hw/ide/isa.h" header.

Rename ISAIDEState::isairq as 'irqnum' to emphasize this is
not a qemu_irq object but the number (index) of an ISA IRQ.

Message-Id: <20230215112712.23110-5-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/ide/mmio: Extract TYPE_MMIO_IDE declarations to 'hw/ide/mmio.h'

"hw/ide.h" is a mixed bag of lost IDE declarations.

Extract mmio_ide_init_drives() and the TYPE_MMIO_IDE QOM
declarations to a new "hw/ide/mmio.h" header.

Document the SysBus interface.

Message-Id: <20230215112712.23110-4-philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/ide/mmio: Use CamelCase for MMIO_IDE state name

Following docs/devel/style.rst guidelines, rename MMIOIDEState
as IdeMmioState.

Having the structure name and its typedef named equally,
we can manually convert from the old DECLARE_INSTANCE_CHECKER()
macro to the more recent OBJECT_DECLARE_SIMPLE_TYPE().

Note, due to that name mismatch, this macro wasn't automatically
converted during commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE
when possible").

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230220091358.17038-3-philmd@linaro.org>

hw/ide/ahci: Trace ncq write command as write instead of read

Fixes: e4baa9f00b ("AHCI: Replace DPRINTF with trace-events")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230217103130.42077-1-f.ebner@proxmox.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/i386/xen: Remove unused 'hw/ide.h' include from header

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20230220092707.22584-1-philmd@linaro.org>

MAINTAINERS: Mark IDE and Floppy as "Odd Fixes"

I have not been able to give these devices the love they need for a
while now. Update the maintainers file to reflect the truth of the
matter.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230206182544.711117-1-jsnow@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

scripts/checkpatch.pl: Do not allow assert(0)

Since commit 262a69f428 ("osdep.h: Prohibit disabling assert()
in supported builds") we can not build QEMU with NDEBUG (or
G_DISABLE_ASSERT) defined, thus 'assert(0)' always aborts QEMU.

However some static analyzers / compilers doesn't notice NDEBUG
can't be defined and emit warnings if code is used after an
'assert(0)' call.

Apparently such compiler isn't as clever with G_DISABLE_ASSERT,
so we can silent these warnings by using g_assert_not_reached()
which is easier to read anyway.

In order to avoid these annoying warnings, add a checkpatch rule
to prohibit 'assert(0)'. Suggest using g_assert_not_reached()
instead. For example when reverting the previous patch we get:

  ERROR: use g_assert_not_reached() instead of assert(0)
  #21: FILE: target/ppc/dfp_helper.c:124:
  +            assert(0); /* cannot get here */

  ERROR: use g_assert_not_reached() instead of assert(0)
  #30: FILE: target/ppc/dfp_helper.c:141:
  +            assert(0); /* cannot get here */

  total: 2 errors, 0 warnings, 16 lines checked

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221232520.14480-3-philmd@linaro.org>

block/vvfat: Remove pointless check of NDEBUG

Since commit 262a69f428 ("osdep.h: Prohibit disabling
assert() in supported builds") 'NDEBUG' can not be defined,
so '#ifndef NDEBUG' is dead code. Remove it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221232520.14480-5-philmd@linaro.org>

hw/ppc/sam460ex: Correctly set MAL properties

MAL properties are declared as uint8_t:

  static Property ppc4xx_mal_properties[] = {
      DEFINE_PROP_UINT8("txc-num", Ppc4xxMalState, txcnum, 0),
      DEFINE_PROP_UINT8("rxc-num", Ppc4xxMalState, rxcnum, 0),
      DEFINE_PROP_END_OF_LIST(),
  };

Correct the API use by setting the property using
qdev_prop_set_uint8(). No behavioral change.

Fixes: da116a8aab ("ppc/ppc405: QOM'ify MAL")
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230203145536.17585-7-philmd@linaro.org>

hw/display/sm501: Add fallbacks to pixman routines

Pixman may return false if it does not have a suitable implementation.
Add fallbacks to handle such cases.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reported-by: Rene Engel <ReneEngel80@emailn.de>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <20ed9442a0146238254ccc340c0d1efa226c6356.1677445307.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/display/sm501: Implement more 2D raster operations

Add simple implementation for two raster operations that are used by
AmigaOS which fixes graphics problems in some programs using these.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reported-by: Rene Engel <ReneEngel80@emailn.de>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <17ef3c59dc7868f75034e9ebe21e2999c8f718d4.1677445307.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/display/sm501: Alias 'dma-offset' QOM property in chipset object

No need to use an intermediate 'dma-offset' property in the
chipset object. Alias the property, so when the machine (here
r2d-plus) sets the value on the chipset, it is propagated to
the OHCI object.

Note we can rename the chipset 'base' property as 'dma-offset'
since the object is a non-user-creatable sysbus type.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230203145536.17585-12-philmd@linaro.org>

hw/display/sm501: Embed OHCI QOM child in chipset

Note this device doesn't implement unrealize().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230203145536.17585-11-philmd@linaro.org>

hw/usb/xhci-nec: Replace container_of() by NEC_XHCI() QOM cast macro

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-8-philmd@linaro.org>

hw/usb/xhci-nec: Declare QOM macros for NEC_XHCI

NEC_XHCI is a QOM object type. Declare its macros /
typedefs using OBJECT_DECLARE_SIMPLE_TYPE().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-7-philmd@linaro.org>

hw/usb/uhci: Replace container_of() by UHCI_GET_CLASS() QOM macro

By using the QOM UHCI_GET_CLASS() cast macro we don't to
use the intermediate PCIDeviceClass variable.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-6-philmd@linaro.org>

hw/usb/uhci: Declare QOM macros using OBJECT_DECLARE_TYPE()

The automatic conversion done during commit a489d1951c
("Use OBJECT_DECLARE_TYPE when possible") missed this
model because the typedefs are in a different file unit
(hcd-uhci.c) than where the DECLARE_INSTANCE_CHECKER()
is (hcd-uhci.h). Manually convert to OBJECT_DECLARE_TYPE().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-5-philmd@linaro.org>

hw/usb/ohci: Fix typo

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <03599fd4db313ac4f651cceb43340109ad6a14b8.1676916640.git.balaton@eik.bme.hu>

hw/usb/ohci: Add trace points for register access

To help debugging add trace points that print values read from or
written to the device's registers.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <1bb4985e5dfc1df5a290e77f76fd827ae3592ab7.1676916640.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/usb/ohci: Move a function next to where it is used

The ohci_port_set_if_connected() function is only used by
ohci_port_set_status(), move next to it to have them at the same place.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <46411d4980ab0fba61ab0d2209a939fdc41eb573.1676916640.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/usb/ohci: Code style fix missing braces and extra parenthesis

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <aaa3ddee99c7677d6cc137f637982e94267b99b6.1676916640.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/usb/ohci: Code style fix white space errors

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <c9b99b3555dcd03194a8950b810f5e1b4b4bd5d3.1676916640.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/usb/ohci: Code style fix comments

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <9b0aadedc7c4780fefdc27f14f72ac9003032fbf.1676916639.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/usb/ohci: Use OHCIState type definition

Forward-define the type first, then use it for the ohci_die() handler.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-3-philmd@linaro.org>

hw/usb/ohci: Include missing 'sysbus.h' header

Avoid when including "hw/usb/hcd-ohci.h":

  hw/usb/hcd-ohci.h:100:5: error: unknown type name 'SysBusDevice'
      SysBusDevice parent_obj;
      ^

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230203113650.78146-6-philmd@linaro.org>

hw/usb/u2f: Declare QOM macros using OBJECT_DECLARE_TYPE()

hw/usb/u2f.h was added by commit 80e267f1d1 ("hw/usb: Add
U2F key base class"), almost the same time of the automatic
conversion done by commit c821774a3b ("Use OBJECT_DECLARE_TYPE
where posible"). Manually convert to OBJECT_DECLARE_TYPE().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-9-philmd@linaro.org>

hw/usb/dev-smartcard-reader: Avoid forward-declaring CCIDBus

To avoid forward-declaring CCIDBus, declare CCID_BUS QOM
definitions before its use in the USBCCIDState structure.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-2-philmd@linaro.org>

hw/audio/ac97: Split off some definitions to a header

These can be shared with other AC97 implementations.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <6f0980fdc3753624be6f3935a6ab0a2dc1df4b30.1677445307.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/audio/ac97: Replace container_of() by AC97() QOM cast macro

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220131837.26292-5-philmd@linaro.org>

hw/audio/es1370: Replace container_of() by ES1370() QOM cast macro

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220131837.26292-4-philmd@linaro.org>

hw/audio/es1370: Avoid forward-declaring ES1370State

To avoid forward-declaring ES1370State, declare ES1370 QOM
definitions before its use in the chan_bits structure.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220131837.26292-3-philmd@linaro.org>

hw/audio/hda-codec: Avoid forward-declaring HDAAudioState

To avoid forward-declaring HDAAudioState, declare HDA_AUDIO QOM
definitions before its use in the HDAAudioStream structure.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220131837.26292-2-philmd@linaro.org>

hw/timer/hpet: Include missing 'hw/qdev-properties.h' header

Avoid when refactoring unrelated headers:

  hw/timer/hpet.c:776:39: error: array has incomplete element type 'Property' (aka 'struct Property')
  static Property hpet_device_properties[] = {
                                        ^
  hw/timer/hpet.c:777:5: error: implicit declaration of function 'DEFINE_PROP_UINT8' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
      DEFINE_PROP_UINT8("timers", HPETState, num_timers, HPET_MIN_TIMERS),
      ^

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230215174353.37097-2-philmd@linaro.org>

hw/rtc: Rename rtc_[get|set]_memory -> mc146818rtc_[get|set]_cmos_data

rtc_get_memory() and rtc_set_memory() helpers only work with
TYPE_MC146818_RTC devices. 'memory' in their name refer to
the CMOS region. Rename them as mc146818rtc_get_cmos_data()
and mc146818rtc_set_cmos_data() to be explicit about what
they are doing.

Mechanical change doing:

  $ sed -i -e 's/rtc_set_memory/mc146818rtc_set_cmos_data/g' \
        $(git grep -wl rtc_set_memory)
  $ sed -i -e 's/rtc_get_memory/mc146818rtc_get_cmos_data/g' \
        $(git grep -wl rtc_get_memory)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-4-philmd@linaro.org>

hw/rtc/mc146818rtc: Pass MC146818RtcState instead of ISADevice argument

rtc_get_memory() and rtc_set_memory() methods can not take any
TYPE_ISA_DEVICE object. They expect a TYPE_MC146818_RTC one.

Simplify the API by passing a MC146818RtcState.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-3-philmd@linaro.org>

hw/rtc/mc146818rtc: Rename RTCState -> MC146818RtcState

RTCState only represents a Motorola MC146818 model,
not any RTC chipset. Rename the structure as MC146818RtcState
using:

  $ sed -i -e s/RTCState/MC146818RtcState/g $(git grep -wl RTCState)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw: Replace isa_get_irq() by isa_bus_get_irq() when ISABus is available

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230215161641.32663-4-philmd@linaro.org>

hw/isa: Factor isa_bus_get_irq() out of isa_get_irq()

isa_get_irq() was added in commit 3a38d437ca
("Add isa_reserve_irq()" Fri Aug 14 11:36:15 2009) as:

    a temporary interface to be used to allocate ISA IRQs for
    devices which have not yet been converted to qdev, and for
    special cases which are not suited for qdev conversions,
    such as the 'ferr'.

We still use it 14 years later, using the global 'isabus'
singleton. In order to get rid of such *temporary* interface,
extract isa_bus_get_irq() which can take any ISABus* object.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230215161641.32663-3-philmd@linaro.org>

hw/isa: Rename isa_get_dma() -> isa_bus_get_dma()

isa_get_dma() returns a DMA channel handler from an ISABus.
To emphasize this, rename it as isa_bus_get_dma().

Mechanical change using:

  $ sed -i -e 's/isa_get_dma/isa_bus_get_dma/g' \
        $(git grep -l isa_get_dma)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230215161641.32663-2-philmd@linaro.org>

hw/isa: Use isa_address_space_io() to reduce access on global 'isabus'

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230210163744.32182-11-philmd@linaro.org>

hw/isa: Rename isa_bus_irqs() -> isa_bus_register_input_irqs()

isa_bus_irqs() register an array of input IRQs on
the ISA bus. Rename it as isa_bus_register_input_irqs().

Mechanical change using:

 $ sed -i -e 's/isa_bus_irqs/isa_bus_register_input_irqs/g' \
   $(git grep -wl isa_bus_irqs)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-10-philmd@linaro.org>

hw/isa: Un-inline isa_bus_from_device()

No point in inlining isa_bus_from_device() which is only
used at device realization time.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230210163744.32182-9-philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>

hw/isa: Reorder to separate ISABus* vs ISADevice* functions

Separate functions taking an ISABus* argument versus
functions taking a ISADevice* one.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-8-philmd@linaro.org>

hw/isa: Remove empty ISADeviceClass structure

ISADeviceClass is an empty class and just increase code
complexity. Remove it, directly embedding DeviceClass in
classes expanding TYPE_ISA_DEVICE.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230215161641.32663-19-philmd@linaro.org>

hw/sparc64/sun4u: Keep reference to ISA input IRQs in EbusState

Keep reference to ISA input IRQs in EbusState.

To emphasize input/output distinction, rename arrays
as isa_irqs_in / isa_irqs_out.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-7-philmd@linaro.org>

hw/isa/vt82c686: Remove intermediate IRQ forwarder

Directly dispatch ISA IRQs to 'cpu_intr' output IRQ
by removing the intermediate via_isa_request_i8259_irq()
handler. Rename ISA IRQs array as 'isa_irqs_in' to
emphasize these are input IRQs.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>