Chris Wilson [Mon, 2 Nov 2020 16:19:31 +0000 (16:19 +0000)]
drm/i915: Hold onto an explicit ref to i915_vma_work.pinned
Since __vma_release is run by a kworker after the fence has been
signaled, it is no longer protected by the active reference on the vma,
and so the alias of vw->pinned to vma->obj is also not protected by a
reference on the object. Add an explicit reference for vw->pinned so it
will always be safe.
Found by inspection.
Fixes: 54d7195f8c64 ("drm/i915: Unpin vma->obj on early error") Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.6+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201102161931.30031-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 2 Nov 2020 22:10:57 +0000 (22:10 +0000)]
drm/i915/gt: Flush xcs before tgl breadcrumbs
In a simple test case that writes to scratch and then busy-waits for the
batch to be signaled, we observe that the signal is before the write is
posted. That is bad news.
Splitting the flush + write_dword into two separate flush_dw prevents
the issue from being reproduced, we can presume the post-sync op is not
so post-sync.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/216
Testcase: igt/gem_exec_fence/parallel
Testcase: igt/i915_selftest/live/gt_timelines Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201102221057.29626-2-chris@chris-wilson.co.uk
John Harrison [Wed, 28 Oct 2020 14:58:24 +0000 (07:58 -0700)]
drm/i915/guc: Update to use firmware v49.0.1
The latest GuC firmware includes a number of interface changes that
require driver updates to match.
* Starting from Gen11, the ID to be provided to GuC needs to contain
the engine class in bits [0..2] and the instance in bits [3..6].
NOTE: this patch breaks pointer dereferences in some existing GuC
functions that use the guc_id to dereference arrays but these functions
are not used for now as we have GuC submission disabled and we will
update these functions in follow up patch which requires new IDs.
* The new GuC requires the additional data structure (ADS) and associated
'private_data' pointer to be setup. This is basically a scratch area
of memory that the GuC owns. The size is read from the CSS header.
* There is now a physical to logical engine mapping table in the ADS
which needs to be configured in order for the firmware to load. For
now, the table is initialised with a 1 to 1 mapping.
* GUC_CTL_CTXINFO has been removed from the initialization params.
* reg_state_buffer is maintained internally by the GuC as part of
the private data.
* The ADS layout has changed significantly. This patch updates the
shared structure and also adds better documentation of the layout.
* While i915 does not use GuC doorbells, the firmware now requires
that some initialisation is done.
* The number of engine classes and instances supported in the ADS has
been increased.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028145826.2949180-2-John.C.Harrison@Intel.com
Chris Wilson [Tue, 27 Oct 2020 18:47:59 +0000 (18:47 +0000)]
drm/i915/gem: Avoid synchronous binds deep within locks
On bxt, we require a VT'd w/a to serialise all GGTT updates with memory
transfers, and use stop_machine() for this purpose. stop_machine() is a
global serialisation barrier and so dangerous to use from within
critical sections, as the stop_machine() will wait for all cpus to enter
the stop_machine callback, and those cpus may be waiting for the
critical section already held.
intel_timeline_read_hwsp() is used to support semaphore waits between
engines, that may themselves be deferred for arbitrary periods -- that
is the read of the target request's HWSP is at an indeterminant point in
the future. To support this, we need to prevent overwriting a HWSP that
is being watched across a seqno wrap (otherwise the next request will
write its value into the old HWSP preventing the watcher from making
progress, ad infinitum.) To simulate the observer across a wrap, let's
create a request that reads from the HWSP and dispatch it at different
points around a wrap to see if the value is lost.
Chris Wilson [Thu, 22 Oct 2020 06:41:27 +0000 (07:41 +0100)]
drm/i915/gt: Use the local HWSP offset during submission
We wrap the timeline on construction of the next request, but there may
still be requests in flight that have not yet finalized the breadcrumb.
(The breadcrumb is delayed as we need engine-local offsets, and for the
virtual engine that is not known until execution.) As such, by the time
we write to the timeline's HWSP offset it may have changed, and we
should use the value we preserved in the request instead.
Though the window is small and infrequent (at full flow we can expect a
timeline's seqno to wrap once every 30 minutes), the impact of writing
the old seqno into the new HWSP is severe: the old requests are never
completed, and the new requests are completed before they are even
submitted.
Fixes: ebece7539242 ("drm/i915: Keep timeline HWSP allocated until idle across the system") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201022064127.10159-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 22 Oct 2020 21:08:14 +0000 (22:08 +0100)]
drm/i915/selftests: Skip RPS tests on Ironlake (only IPS)
Since Ironlake uses intel_ips.ko for its dynamic frequency adjustment,
we do not have direct control over the frequency management so such
tests are defunct. Similarly, we can't check the gen6+ RPS registers on
Ironlake.
Hopefully this catches all the invalid tests now that Ironlake has
rejoined the dynamic GPU frequency club. There is an opportunity for the
reader to add tests to exercise MEMINTRSTS and co.
Tvrtko Ursulin [Tue, 20 Oct 2020 16:11:44 +0000 (17:11 +0100)]
drm/i915/pmu: Fix CPU hotplug with multiple GPUs
Since we keep a driver global mask of online CPUs and base the decision
whether PMU needs to be migrated upon it, we need to make sure the
migration is done for all registered PMUs (so GPUs).
To do this we need to track the current CPU for each PMU and base the
decision on whether to migrate on a comparison between global and local
state.
At the same time, since dynamic CPU hotplug notification slots are a
scarce resource and given how we already register the multi instance type
state, we can and should add multiple instance of the i915 PMU to this
same state and not allocate a new one for every GPU.
v2:
* Use pr_notice. (Chris)
v3:
* Handle a nasty interaction where unregistration which triggers a false
CPU offline event. (Chris)
Tvrtko Ursulin [Tue, 20 Oct 2020 10:08:21 +0000 (11:08 +0100)]
drm/i915/pmu: Handle PCI unbind
Mark the device as closed and keep references to driver data alive to
allow for safe driver unbind with active PMU clients. Perf core does not
otherwise handle this case so we have to do it manually like this.
Chris Wilson [Mon, 19 Oct 2020 20:38:25 +0000 (21:38 +0100)]
drm/i915/gem: Flush coherency domains on first set-domain-ioctl
Avoid skipping what appears to be a no-op set-domain-ioctl if the cache
coherency state is inconsistent with our target domain. This also has
the utility of using the population of the pages to validate the backing
store.
The danger in skipping the first set-domain is leaving the cache
inconsistent and submitting stale data, or worse leaving the clean data
in the cache and not flushing it to the GPU. The impact should be small
as it requires a no-op set-domain as the very first ioctl in a
particular sequence not found in typical userspace.
Reported-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com> Fixes: 754a25442705 ("drm/i915: Skip object locking around a no-op set-domain ioctl")
Testcase: igt/gem_mmap_offset/blt-coherency Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019203825.10966-1-chris@chris-wilson.co.uk
Matthew Auld [Wed, 21 Oct 2020 10:36:06 +0000 (11:36 +0100)]
drm/i915/region: fix max size calculation
We are incorrectly limiting the max allocation size as per the mm
max_order, which is effectively the largest power-of-two that we can fit
in the region size. However, it's normal to setup the region or
allocator with a non-power-of-two size(for example 3G), which we should
already handle correctly, except it seems for the early too-big-check.
v2: make sure we also exercise the I915_BO_ALLOC_CONTIGUOUS path, which
is quite different, since for that we are actually limited by the
largest power-of-two that we can fit within the region size. (Chris)
Fixes: b908be543e44 ("drm/i915: support creating LMEM objects") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: CQ Tang <cq.tang@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201021103606.241395-1-matthew.auld@intel.com
Chris Wilson [Mon, 19 Oct 2020 14:28:41 +0000 (15:28 +0100)]
drm/i915/selftests: Flush the old heartbeat more gently
In order to test how fast the heartbeat can respond, we measure with the
interval set to its minimum. Before we measure though, we want to be
sure we start with a fresh pulse, and so wait until any old one is
complete. During that wait though, we were continually flushing the
work, and so continually re-evaluating to see if the pulse was complete,
and each attempt would count as an unresponsive system. If the engine
did not complete the request in the couple of busy-spins, it would flag
an error. This is unfortunate, so let's not busy-spin waiting for the
old heartbeat, but terminate it and start afresh.
Chris Wilson [Mon, 19 Oct 2020 16:50:05 +0000 (17:50 +0100)]
drm/i915: Exclude low pages (128KiB) of stolen from use
The GPU is trashing the low pages of its reserved memory upon reset. If
we are using this memory for ringbuffers, then we will dutiful resubmit
the trashed rings after the reset causing further resets, and worse. We
must exclude this range from our own use. The value of 128KiB was found
by empirical measurement (and verified now with a selftest) on gen9.
Chris Wilson [Mon, 19 Oct 2020 08:34:44 +0000 (09:34 +0100)]
drm/i915/gt: Onion unwind for scratch page allocation failure
In switching to using objects for our ppGTT scratch pages, care was not
taken to avoid trying to unref NULL objects on failure. And for gen6
ppGTT, it appears we forgot entirely to unwind after a partial allocation
failure.
Fixes: 89351925a477 ("drm/i915/gt: Switch to object allocations for page directories") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019083444.1286-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 16 Oct 2020 09:25:27 +0000 (10:25 +0100)]
drm/i915: Use the active reference on the vma while capturing
During error capture, we need to take a reference to the vma from before
the reset in order to catpure the contents of the vma later. Currently
we are using both an active reference and a kref, but due to nature of
the i915_vma reference handling, that kref is on the vma->obj and not
the vma itself. This means the vma may be destroyed as soon as it is
idle, that is in between the i915_active_release(&vma->active) and the
i915_vma_put(vma):
Chris Wilson [Thu, 15 Oct 2020 19:08:16 +0000 (20:08 +0100)]
drm/i915/gt: Confirm the context survives execution
Repeat our sanitychecks from before execution to after execution. One
expects that if we were to see these, the gpu would already be on fire,
but the timing may be informative.
Chris Wilson [Fri, 2 Oct 2020 08:34:25 +0000 (09:34 +0100)]
drm/i915/gt: Undo forced context restores after trivial preemptions
We may try to preempt the currently executing request, only to find that
after unravelling all the dependencies that the original executing
context is still the earliest in the topological sort and re-submitted
back to HW (if we do detect some change in the ELSP that requires
re-submission). However, due to the way we check for wrap-around during
the unravelling, we mark any context that has been submitted just once
(i.e. with the rq->wa_tail set, but the ring->tail earlier) as
potentially wrapping and requiring a forced restore on resubmission.
This was expected to be not a problem, as it was anticipated that most
unwinding for preemption would result in a context switch and the few
that did not would be lost in the noise. It did not take long for
someone to find one particular workload where the cost of those extra
context restores was measurable.
However, since we know the wa_tail is of fixed size, and we know that a
request must be larger than the wa_tail itself, we can safely maintain
the check for request wrapping and check against a slightly future point
in the ring that includes an expected wa_tail. (That is if the
ring->tail is already set to rq->wa_tail, including another 8 bytes in
the check does not invalidate the incremental wrap detection.)
Fixes: 8ab3a3812aa9 ("drm/i915/gt: Incrementally check for rewinding") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Bruce Chang <yu.bruce.chang@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201002083425.4605-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 15 Oct 2020 19:50:23 +0000 (20:50 +0100)]
drm/i915/gt: Delay execlist processing for tgl
When running gem_exec_nop, it floods the system with many requests (with
the goal of userspace submitting faster than the HW can process a single
empty batch). This causes the driver to continually resubmit new
requests onto the end of an active context, a flood of lite-restore
preemptions. If we time this just right, Tigerlake hangs.
Inserting a small delay between the processing of CS events and
submitting the next context, prevents the hang. Naturally it does not
occur with debugging enabled. The suspicion then is that this is related
to the issues with the CS event buffer, and inserting an mmio read of
the CS pointer status appears to be very successful in preventing the
hang. Other registers, or uncached reads, or plain mb, do not prevent
the hang, suggesting that register is key -- but that the hang can be
prevented by a simple udelay, suggests it is just a timing issue like
that encountered by commit 233c1ae3c83f ("drm/i915/gt: Wait for CSB
entries on Tigerlake"). Also note that the hang is not prevented by
applying CTX_DESC_FORCE_RESTORE, or by inserting a delay on the GPU
between requests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Bruce Chang <yu.bruce.chang@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201015195023.32346-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 15 Oct 2020 11:59:54 +0000 (12:59 +0100)]
drm/i915/gem: Support parsing of oversize batches
Matthew Auld noted that on more recent systems (such as the parser for
gen9) we may have objects that are larger than expected by the GEM uAPI
(i.e. greater than u32). These objects would have incorrect implicit
batch lengths, causing the parser to reject them for being incomplete,
or worse.
Based on a patch by Matthew Auld.
Reported-by: Matthew Auld <matthew.auld@intel.com> Fixes: 435e8fc059db ("drm/i915: Allow parsing of unsized batches")
Testcase: igt/gem_exec_params/larger-than-life-batch Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20201015115954.871-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 15 Oct 2020 12:21:38 +0000 (13:21 +0100)]
drm/i915/gt: Fixup tgl mocs for PTE tracking
Forcing mocs:1 [used for our winsys follows-pte mode] to be cached
caused display glitches. Though it is documented as deprecated (and so
likely behaves as uncached) use the follow-pte bit and force it out of
L3 cache.
Fixes: 4d8a5cfe3b13 ("drm/i915/gt: Initialize reserved and unspecified MOCS indices")
Testcase: igt/kms_frontbuffer_tracking
Testcase: igt/kms_big_fb Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ayaz A Siddiqui <ayaz.siddiqui@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-4-chris@chris-wilson.co.uk
Ville Syrjälä [Thu, 15 Oct 2020 12:21:37 +0000 (13:21 +0100)]
drm/i915: Enable eLLC caching of display buffers for SKL+
Since SKL the eLLC has been sitting on the far side of the system
agent, meaning the display engine can utilize it. Let's enable that.
I chose WB for the caching mode, because my numbers are indicating
that WT might actually be WB and WC might actually be UC. I'm not
100% sure that is indeed the case but at least my simple rendercopy
based benchmark didn't see any difference in performance.
Also if I configure things to do LLCeLLC+WT I still get cache dirt
on my screen, suggesting that is in fact operating in WB mode
anyway. This is also the reason I had to fix the MOCS target cache
to really say PTE rather than LLC+eLLC.
Since SKL the eLLC has been sitting on the far side of the system agent,
meaning the display engine can utilize it. Let's enable that.
Eero's earlier benchmarks numbers:
"* Results in GfxBench and Unigine (Valley/Heaven) tests were within daily
variation on the tested SKL machines
* SKL GT2 (no eLLC) / Xorg / Unity:
* Some of the higher FPS SynMark pixel and vertex shader tests
are few percent higher, more than daily variance
=> Do you see any reason why this machine would be impacted
although it doesn't eLLC?"
Caveats:
- Still haven't tested with a prime setup
- Still not entirely sure this a good idea, but I've been
using it on my cfl anyway :)
Ville Syrjälä [Thu, 15 Oct 2020 12:21:35 +0000 (13:21 +0100)]
drm/i915: Mark ininitial fb obj as WT on eLLC machines to avoid rcu lockup during fbdev init
Currently we leave the cache_level of the initial fb obj
set to NONE. This means on eLLC machines the first pin_to_display()
will try to switch it to WT which requires a vma unbind+bind.
If that happens during the fbdev initialization rcu does not
seem operational which causes the unbind to get stuck. To
most appearances this looks like a dead machine on boot.
Avoid the unbind by already marking the object cache_level
as WT when creating it. We still do an excplicit ggtt pin
which will rewrite the PTEs anyway, so they will match whatever
cache level we set.
drm/i915/gt: Initialize reserved and unspecified MOCS indices
In order to avoid functional breakage of mis-programmed applications that
have grown to depend on unused MOCS entries, we are programming
those entries to be equal to fully cached ("L3 + LLC") entry.
These reserved and unspecified entries should not be used as they may be
changed to less performant variants with better coherency in the future
if more entries are needed.
v2: As suggested by Lucas De Marchi to utilise __init_mocs_table for
programming default value, setting I915_MOCS_PTE index of tgl_mocs_table
with desired value.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Francisco Jerez <currojerez@riseup.net> Cc: Mathew Alwin <alwin.mathew@intel.com> Cc: Mcguire Russell W <russell.w.mcguire@intel.com> Cc: Spruit Neil R <neil.r.spruit@intel.com> Cc: Zhou Cheng <cheng.zhou@intel.com> Cc: Benemelis Mike G <mike.g.benemelis@intel.com> Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200729102539.134731-2-ayaz.siddiqui@intel.com Cc: stable@vger.kernel.org
Chris Wilson [Tue, 6 Oct 2020 09:46:53 +0000 (10:46 +0100)]
drm/i915/gt: Track the most recent pulse for the heartbeat
Since we track the idle_pulse for flushing the barriers and avoid
re-emitting the pulse upon idling if no futher action is required, this
also impacts the heartbeat. Before emitting a fresh heartbeat, we look
at the engine idle status and assume that if the pulse was the last
request emitted along the heartbeat, the engine is idling and a
heartbeat pulse not required. This assumption fails, but we can reuse
the idle pulse as the heartbeat if we are yet to emit one, and so track
the status of that pulse for our engine health check.
This impacts tgl/rcs0 as we rely on the heartbeat for our healthcheck for
the normal preemption detection mechanism is disabled by default.
Tvrtko Ursulin [Tue, 6 Oct 2020 09:25:08 +0000 (10:25 +0100)]
drm/i915: Fix DMA mapped scatterlist lookup
As the previous patch fixed the places where we walk the whole scatterlist
for DMA addresses, this patch fixes the random lookup functionality.
To achieve this we have to add a second lookup iterator and add a
i915_gem_object_get_sg_dma helper, to be used analoguous to existing
i915_gem_object_get_sg_dma. Therefore two lookup caches are maintained per
object and they are flushed at the same point for simplicity. (Strictly
speaking the DMA cache should be flushed from i915_gem_gtt_finish_pages,
but today this conincides with unsetting of the pages in general.)
Partial VMA view is then fixed to use the new DMA lookup and properly
query sg length.
v2:
* Checkpatch.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Tom Murphy <murphyt7@tcd.ie> Cc: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201006092508.1064287-2-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Tue, 6 Oct 2020 09:25:07 +0000 (10:25 +0100)]
drm/i915: Fix DMA mapped scatterlist walks
When walking DMA mapped scatterlists sg_dma_len has to be used since it
can be different (coalesced) from the backing store entry.
This also means we have to end the walk when encountering a zero length
DMA entry and cannot rely on the normal sg list end marker.
Both issues were there in theory for some time but were hidden by the fact
Intel IOMMU driver was never coalescing entries. As there are ongoing
efforts to change this we need to start handling it.
v2:
* Use unsigned int for local storing sg_dma_len. (Logan)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: 85d1225ec066 ("drm/i915: Introduce & use new lightweight SGL iterators")
References: b31144c0daa8 ("drm/i915: Micro-optimise gen6_ppgtt_insert_entries()") Reported-by: Tom Murphy <murphyt7@tcd.ie> Suggested-by: Tom Murphy <murphyt7@tcd.ie> # __sgt_iter Suggested-by: Logan Gunthorpe <logang@deltatee.com> # __sgt_iter Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201006092508.1064287-1-tvrtko.ursulin@linux.intel.com
Chris Wilson [Tue, 29 Sep 2020 11:26:39 +0000 (12:26 +0100)]
drm/i915/gt: Scrub HW state on remove
Currently we do a final scrub of the HW state upon release. However,
when rebinding the device, this is too late as the device may either
have been partially rebound or the device is no longer accessible. If
the device has been removed before release, the reset goes astray
leaving the device in an inconsistent state, unlikely to work without a
full PCI reset. Furthermore, if the device is partially rebound before
the HW scrubbing, there may be leftover HW state that should have been
scrubbed. Either way, we need to push the scrubbing earlier before the
removal, so into unregister. The danger is that on older machines,
resetting the GPU also impact the display engine and so the reset should
be after modesetting is disabled (and before reuse we need to recover
modesetting).
Chris Wilson [Thu, 1 Oct 2020 10:26:32 +0000 (11:26 +0100)]
drm/i915: Skip over MI_NOOP when parsing
Though less likely in practice, igt uses MI_NOOP frequently to pad out
its batch buffers. The lookup and valiation of so many MI_NOOP command
descriptions is noticeable, though the side-effect of poisoning the
last-validated-command cache is more likely to impact upon real CS.
Chris Wilson [Wed, 30 Sep 2020 16:32:53 +0000 (17:32 +0100)]
drm/i915/gt: Retire cancelled requests on unload
If we manage to hit the intel_gt_set_wedged_on_fini() while active, i.e.
module unload during a stress test, we may cancel the requests but not
clean up. This leads to a very slow module unload as we wait for
something or other to trigger the retirement flushing, or timeout and
unload with a bunch of warnings. Instead if we explicitly cancel then
cleanup on an active unload, it should be instant and quiet.
Chris Wilson [Mon, 28 Sep 2020 21:59:42 +0000 (22:59 +0100)]
drm/i915: Avoid mixing integer types during batch copies
Be consistent and use unsigned long throughout the chunk copies to
avoid the inherent clumsiness of mixing integer types of different
widths and signs. Failing to take acount of a wider unsigned type when
using min_t can lead to treating it as a negative, only for it flip back
to a large unsigned value after passing a boundary check.
Fixes: ed13033f0287 ("drm/i915/cmdparser: Only cache the dst vmap")
Testcase: igt/gen9_exec_parse/bb-large Reported-by: "Candelaria, Jared" <jared.candelaria@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: "Candelaria, Jared" <jared.candelaria@intel.com> Cc: "Bloomfield, Jon" <jon.bloomfield@intel.com> Cc: <stable@vger.kernel.org> # v4.9+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200928215942.31917-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 28 Sep 2020 22:15:10 +0000 (23:15 +0100)]
drm/i915/gem: Always test execution status on closing the context
Verify that if a context is active at the time it is closed, that it is
either persistent and preemptible (with hangcheck running) or it shall
be removed from execution.
Chris Wilson [Mon, 28 Sep 2020 22:15:09 +0000 (23:15 +0100)]
drm/i915/gt: Always send a pulse down the engine after disabling heartbeat
Currently, we check we can send a pulse prior to disabling the
heartbeat to verify that we can change the heartbeat, but since we may
re-evaluate execution upon changing the heartbeat interval we need another
pulse afterwards to refresh execution.
v2: Tvrtko asked if we could reduce the double pulse to a single, which
opened up a discussion of how we should handle the pulse-error after
attempting to change the property, and the desire to serialise
adjustment of the property with its validating pulse, and unwind upon
failure.
Chris Wilson [Mon, 28 Sep 2020 22:15:08 +0000 (23:15 +0100)]
drm/i915: Cancel outstanding work after disabling heartbeats on an engine
We only allow persistent requests to remain on the GPU past the closure
of their containing context (and process) so long as they are continuously
checked for hangs or allow other requests to preempt them, as we need to
ensure forward progress of the system. If we allow persistent contexts
to remain on the system after the the hangcheck mechanism is disabled,
the system may grind to a halt. On disabling the mechanism, we sent a
pulse along the engine to remove all executing contexts from the engine
which would check for hung contexts -- but we did not prevent those
contexts from being resubmitted if they survived the final hangcheck.
Chris Wilson [Fri, 25 Sep 2020 10:11:07 +0000 (11:11 +0100)]
drm/i915/gem: Hold request reference for canceling an active context
We have to be very careful while walking the timeline->requests list
under the RCU guard, as the requests (and so rq->link) use
SLAB_TYPESAFE_BY_RCU and so the requests may be reallocated within an
rcu grace period. As the requests are reallocated, they are removed from
one list and placed on another, and if we are iterating over that
request at that moment, the list iteration jumps from one list to the
next and promptly gets confused. Verify we hold the request reference
to ensure that the request is not added to a new list behind our backs.
Chris Wilson [Fri, 25 Sep 2020 10:11:06 +0000 (11:11 +0100)]
drm/i915: Redo "Remove i915_request.lock requirement for execution callbacks"
The reordering and rebasing of commit 2e4c6c1a9db5 ("drm/i915: Remove
i915_request.lock requirement for execution callbacks") caused it to
revert an earlier correction. Let us restore commit 99f0a640d464
("drm/i915: Remove requirement for holding i915_request.lock for
breadcrumbs")
Chris Wilson [Thu, 23 Jul 2020 17:21:19 +0000 (18:21 +0100)]
drm/i915/gem: Serialise debugfs i915_gem_objects with ctx->mutex
Since the debugfs may peek into the GEM contexts as the corresponding
client/fd is being closed, we may try and follow a dangling pointer.
However, the context closure itself is serialised with the ctx->mutex,
so if we hold that mutex as we inspect the state coupled in the context,
we know the pointers within the context are stable and will remain valid
as we inspect their tables.
Jani Nikula [Thu, 17 Sep 2020 16:50:56 +0000 (19:50 +0300)]
drm/i915/uc: tune down GuC communication enabled/disabled messages
The GuC communication enabled/disabled messages are too noisy in info
level. Convert them from info to debug level, and switch to device based
logging while at it.
Matthew Auld [Mon, 21 Sep 2020 16:08:44 +0000 (17:08 +0100)]
drm/i915: check i915_vm_alloc_pt_stash for errors
If we are really unlucky and encounter an error during
i915_vm_alloc_pt_stash, we end up passing an empty pt/pd stash all the
way down into the low-level ppgtt alloc code, leading to explosions,
since it expects at least the required number of pt/pd for the va range.
Fixes: cd0452aa2a0d ("drm/i915: Preallocate stashes for vma page-directories") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200921160844.73186-1-matthew.auld@intel.com
As the last user was eliminated in commit e21fecdcde40 ("drm/i915/gt:
Distinguish the virtual breadcrumbs from the irq breadcrumbs"), we can
remove the function. One less implementation detail creeping beyond its
scope.
Chris Wilson [Wed, 16 Sep 2020 09:00:59 +0000 (10:00 +0100)]
drm/i915: Reduce GPU error capture mutex hold time
Shrink the hold time for the error capture mutex to just around the
acquire/release of the PTE used for reading back the object via the
Global GTT. For platforms that do not need the GGTT read back, we can
skip the mutex entirely and allow concurrent error capture. Where we do
use the GGTT, by restricting the hold time around the slow readback and
compression, we are more resilient against softlockups (khungtaskd) as
the heartbeat may well also trigger an error while the first is on
going, and this allows the heartbeat reset to skip past the capture and
not be stalled.
Chris Wilson [Wed, 16 Sep 2020 09:00:58 +0000 (10:00 +0100)]
drm/i915: Break up error capture compression loops with cond_resched()
As the error capture will compress user buffers as directed to by the
user, it can take an arbitrary amount of time and space. Break up the
compression loops with a call to cond_resched(), that will allow other
processes to schedule (avoiding the soft lockups) and also serve as a
warning should we try to make this loop atomic in the future.
Chris Wilson [Tue, 15 Sep 2020 13:49:23 +0000 (14:49 +0100)]
drm/i915/gt: Use a mmio read of the CSB in case of failure
If we find the GPU didn't update the CSB within 50us, we currently fail
and eventually reset the GPU. Lets report the value from the mmio space
as a last resort, it may just stave off an unnecessary GPU reset.
Chris Wilson [Tue, 15 Sep 2020 13:49:22 +0000 (14:49 +0100)]
drm/i915/gt: Apply the CSB w/a for all
Since we expect to inline the csb_parse() routines, the w/a for the
stale CSB data on Tigerlake will be pulled into process_csb(), and so we
might as well simply reuse the logic for all, and so will hopefully
avoid any strange behaviour on Icelake that was not covered by our
previous w/a.
Chris Wilson [Tue, 15 Sep 2020 13:49:21 +0000 (14:49 +0100)]
drm/i915/gt: Wait for CSB entries on Tigerlake
On Tigerlake, we are seeing a repeat of commit d8f505311717 ("drm/i915/icl:
Forcibly evict stale csb entries") where, presumably, due to a missing
Global Observation Point synchronisation, the write pointer of the CSB
ringbuffer is updated _prior_ to the contents of the ringbuffer. That is
we see the GPU report more context-switch entries for us to parse, but
those entries have not been written, leading us to process stale events,
and eventually report a hung GPU.
However, this effect appears to be much more severe than we previously
saw on Icelake (though it might be best if we try the same approach
there as well and measure), and Bruce suggested the good idea of resetting
the CSB entry after use so that we can detect when it has been updated by
the GPU. By instrumenting how long that may be, we can set a reliable
upper bound for how long we should wait for:
513 late, avg of 61 retries (590 ns), max of 1061 retries (10099 ns)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2045
References: d8f505311717 ("drm/i915/icl: Forcibly evict stale csb entries")
References: HSDES#22011327657, HSDES#1508287568 Suggested-by: Bruce Chang <yu.bruce.chang@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Bruce Chang <yu.bruce.chang@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org # v5.4 Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200915134923.30088-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 15 Sep 2020 10:51:13 +0000 (11:51 +0100)]
drm/i915/gt: Check for a registered driver with IPS
If the ips module calls into the driver during an unbind/bind cycle, we
may see the driver while it has unregistered itself from ips and try and
dereference a NULL ips_mchdev pointer.
Chris Wilson [Tue, 15 Sep 2020 09:14:17 +0000 (10:14 +0100)]
drm/i915/gt: Clear the buffer pool age before use
If we create a new node, it is possible for the slab allocator to return
us a recently freed node. If that node was just retired, it will retain
the current jiffy as its node->age. There is then a miniscule window,
where as that node is retired, it will appear on the free list with an
incorrect age and be eligible for reuse by one thread, and then by a
second thread as the correct node->age is written.
Chris Wilson [Tue, 15 Sep 2020 09:14:15 +0000 (10:14 +0100)]
drm/i915/gem: Avoid implicit vmap for highmem on x86-32
On 32b, highmem using a finite set of indirect PTE (i.e. vmap) to provide
virtual mappings of the high pages. As these are finite, map_new_virtual()
must wait for some other kmap() to finish when it runs out. If we map a
large number of objects, there is no method for it to tell us to release
the mappings, and we deadlock.
However, if we make an explicit vmap of the page, that uses a larger
vmalloc arena, and also has the ability to tell us to release unwanted
mappings. Most importantly, it will fail and propagate an error instead
of waiting forever.
Fixes: fb8621d3bee8 ("drm/i915: Avoid allocating a vmap arena for a single page") #x86-32
References: e87666b52f00 ("drm/i915/shrinker: Hook up vmap allocation failure notifier") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v4.7+ Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-1-chris@chris-wilson.co.uk
drm/i915: Unlock the shared hwsp_gtt object after pinning
The hwsp_gtt object is used for sub-allocation and could therefore
be shared by many contexts causing unnecessary contention during
concurrent context pinning.
However since we're currently locking it only for pinning, it remains
resident until we unpin it, and therefore it's safe to drop the
lock early, allowing for concurrent thread access.
Signed-off-by: Thomas Hellström <thomas.hellstrom@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Tue, 28 Jul 2020 15:21:44 +0000 (16:21 +0100)]
drm/i915: Filter wake_flags passed to default_wake_function
(NOTE: This is the minimal backportable fix, a full fix is being
developed at https://patchwork.freedesktop.org/patch/388048/)
The flags passed to the wait_entry.func are passed onwards to
try_to_wake_up(), which has a very particular interpretation for its
wake_flags. In particular, beyond the published WF_SYNC, it has a few
internal flags as well. Since we passed the fence->error down the chain
via the flags argument, these ended up in the default_wake_function
confusing the kernel/sched.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110 Fixes: ef4688497512 ("drm/i915: Propagate fence errors") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added a note and link about more complete fix] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 16 Jul 2020 14:22:07 +0000 (15:22 +0100)]
drm/i915: Remove i915_request.lock requirement for execution callbacks
To implement preempt-to-busy (and so efficient timeslicing and best utilization
of the hardware submission ports) we let the GPU run asynchronously in respect
to the ELSP submission queue. This created challenges in keeping and accessing
the driver state mirroring the asynchronous GPU execution.
Previous fix 1d9221e9d395 ("drm/i915: Skip signaling a signaled request")
however did not correctly serialize request retirement with the execution
callbacks.
We were using the i915_request.lock to serialise adding an execution callback
with __i915_request_submit. However, if we use an atomic llist_add to serialise
multiple waiters and then check to see if the request is already executing, we
can remove the irq-spinlock and fix serialization between retirement and
execution callbacks in one go.
v2: Avoid using the irq_work when outside of the irq-spinlocks, where we
can execute the callbacks immediately.
v3: Pay close attention to the order of setting ACTIVE on retirement, we
need to ensure the request is signaled and breadcrumbs detached before
we finish removing the request from the engine.
v4: Expanded commit message.
Fixes: 1d9221e9d395 ("drm/i915: Skip signaling a signaled request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-2-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added expanded commit message from Tvrtko and Chris] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 16 Jul 2020 14:22:06 +0000 (15:22 +0100)]
drm/i915: Be wary of data races when reading the active execlists
To implement preempt-to-busy (and so efficient timeslicing and best utilization
of the hardware submission ports) we let the GPU run asynchronously in respect
to the ELSP submission queue. This created challenges in keeping and accessing
the driver state mirroring the asynchronous GPU execution.
The latest occurence of this was spotted by KCSAN:
[ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915]
[ 1413.563221]
[ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1:
[ 1413.563548] __await_execution+0x217/0x370 [i915]
[ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915]
[ 1413.564235] i915_request_await_object+0x421/0x490 [i915]
[ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915]
[ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915]
[ 1413.564998] drm_ioctl_kernel+0x156/0x1b0
[ 1413.565022] drm_ioctl+0x2ff/0x480
[ 1413.565046] __x64_sys_ioctl+0x87/0xd0
[ 1413.565069] do_syscall_64+0x4d/0x80
[ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9
To complicate matters, we have to both avoid the read tearing of *active and
avoid any write tearing as perform the pending[] -> inflight[] promotion of the
execlists.
This is because we cannot rely on the memcpy doing u64 aligned copies on all
kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE
annotations to satisfy KCSAN.
v2: When in doubt, write the same comment again.
v3: Expanded commit message.
Fixes: b55230e5e800 ("drm/i915: Check for awaits on still currently executing requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added expanded commit message from Tvrtko and Chris] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
drm/i915: Add ww locking to pin_to_display_plane, v2.
Use ww locking for pin_to_display_plane for all the pinning and locking.
With the locking removed from set_cache_level, we need to fix
i915_gem_set_caching_ioctl to take the object reservation lock.
As this is a single lock, we don't need to use the ww dance.
Changes since v1:
- Do not use ww locking in i915_gem_set_caching_ioctl (Thomas).
We want to start requiring the reservation_lock instead of obj->mm.lock
for pinning objects, take the ww lock inside vm_fault_gtt as a first step
towards the legacy lock removal.
drm/i915/selftests: Fix locking inversion in lrc selftest.
This function does not use intel_context_create_request, so it has
to use the same locking order as normal code. This is required to
shut up lockdep in selftests.
drm/i915: Dirty hack to fix selftests locking inversion
Some i915 selftests still use i915_vma_lock() as inner lock, and
intel_context_create_request() intel_timeline->mutex as outer lock.
Fortunately for selftests this is not an issue, they should be fixed
but we can move ahead and cleanify lockdep now.
drm/i915: Make sure execbuffer always passes ww state to i915_vma_pin.
As a preparation step for full object locking and wait/wound handling
during pin and object mapping, ensure that we always pass the ww context
in i915_gem_execbuffer.c to i915_vma_pin, use lockdep to ensure this
happens.
This also requires changing the order of eb_parse slightly, to ensure
we pass ww at a point where we could still handle -EDEADLK safely.
drm/i915: Rework intel_context pinning to do everything outside of pin_mutex
Instead of doing everything inside of pin_mutex, we move all pinning
outside. Because i915_active has its own reference counting and
pinning is also having the same issues vs mutexes, we make sure
everything is pinned first, so the pinning in i915_active only needs
to bump refcounts. This allows us to take pin refcounts correctly
all the time.
drm/i915: Pin engine before pinning all objects, v5.
We want to lock all gem objects, including the engine context objects,
rework the throttling to ensure that we can do this. Now we only throttle
once, but can take eb_pin_engine while acquiring objects. This means we
will have to drop the lock to wait. If we don't have to throttle we can
still take the fastpath, if not we will take the slowpath and wait for
the throttle request while unlocked.
The engine has to be pinned as first step, otherwise gpu relocations
won't work.
Changes since v1:
- Only need to get a throttled request in the fastpath, no need for
a global flag any more.
- Always free the waited request correctly.
Changes since v2:
- Use intel_engine_pm_get()/put() to keeep engine pool alive during
EDEADLK handling.
Changes since v3:
- Fix small rq leak.
Changes since v4:
- Use a single reloc_context, for intel_context_pin_ww().
Those arguments are already set as eb.file and eb.args, so kill off
the extra arguments. This will allow us to move eb_pin_engine() to
after we reserved all BO's.
Now that we changed execbuf submission slightly to allow us to do all
pinning in one place, we can now simply add ww versions on top of
struct_mutex. All we have to do is a separate path for -EDEADLK
handling, which needs to unpin all gem bo's before dropping the lock,
then starting over.
This finally allows us to do parallel submission, but because not
all of the pinning code uses the ww ctx yet, we cannot completely
drop struct_mutex yet.
Changes since v1:
- Keep struct_mutex for now. :(
Changes since v2:
- Make sure we always lock the ww context in slowpath.
Changes since v3:
- Don't call __eb_unreserve_vma in eb_move_to_gpu now; this can be
done on normal unlock path.
- Unconditionally release vmas and context.
Changes since v4:
- Rebased on top of struct_mutex reduction.
Changes since v5:
- Remove training wheels.
Changes since v6:
- Fix accidentally broken -ENOSPC handling.
Changes since v7:
- Handle gt buffer pool better.
Changes since v8:
- Properly clear variables, to make -EDEADLK handling not BUG.
Change since v9:
- Fix unpinning fence on pnv and below.
Changes since v10:
- Make relocation gpu chaining working again.
Changes since v11:
- Remove relocation chaining, pain to make it work.
drm/i915: Parse command buffer earlier in eb_relocate(slow)
We want to introduce backoff logic, but we need to lock the
pool object as well for command parsing. Because of this, we
will need backoff logic for the engine pool obj, move the batch
validation up slightly to eb_lookup_vmas, and the actual command
parsing in a separate function which can get called from execbuf
relocation fast and slowpath.
drm/i915: Remove locking from i915_gem_object_prepare_read/write
Execbuffer submission will perform its own WW locking, and we
cannot rely on the implicit lock there.
This also makes it clear that the GVT code will get a lockdep splat when
multiple batchbuffer shadows need to be performed in the same instance,
fix that up.
Revert "drm/i915/gem: Split eb_vma into its own allocation"
This reverts commit 0f1dd02295f3 ("drm/i915/gem: Split eb_vma into
its own allocation") and also moves all unreserving to a single
place at the end, which is a minor simplification.
With the WW locking, we will drop all references only at the
end when unlocking, so refcounting can now be removed.
This reverts commit 7dc8f1143778 ("drm/i915/gem: Drop relocation
slowpath"). We need the slowpath relocation for taking ww-mutex
inside the page fault handler, and we will take this mutex when
pinning all objects.
We also functionally revert ef398881d27d ("drm/i915/gem: Limit
struct_mutex to eb_reserve"), as we need the struct_mutex in
the slowpath as well, and a tiny part of 003d8b9143a6 ("drm/i915/gem:
Only call eb_lookup_vma once during execbuf ioctl"). Specifically,
we make the -EAGAIN handling part of fallback to slowpath again.
With this, we have a proper working slowpath again, which
will allow us to do fault handling with WW locks held.
[mlankhorst: Adjusted for reloc_gpu_flush() changes]
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Removed extra reloc_gpu_flush()] Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-4-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This reverts commit 964a9b0f611ee ("drm/i915/gem: Use chained reloc batches")
and commit 0e97fbb080553 ("drm/i915/gem: Use a single chained reloc batches
for a single execbuf").
When adding ww locking to execbuf, it's hard enough to deal with a
single BO that is part of relocation execution. Chaining is hard to
get right, and with GPU relocation deprecated, it's best to drop this
altogether, instead of trying to fix something we will remove.
This is not a completely 1:1 revert, we reset rq_size to 0 in
reloc_cache_init, this was from e3d291301f99 ("drm/i915/gem: Implement legacy
MI_STORE_DATA_IMM"), because we don't want to break the selftests. (Daniel)
This reverts commit 9e0f9464e2ab ("drm/i915/gem: Async GPU relocations only"),
and related commit 7ac2d2536dfa7 ("drm/i915/gem: Delete unused code").
Async GPU relocations are not the path forward, we want to remove
GPU accelerated relocation support eventually when userspace is fixed
to use VM_BIND, and this is the first step towards that. We will keep
async gpu relocations around for now, until userspace is fixed.
Relocation support will be disabled completely on platforms where there
was never any userspace that depends on it, as the hardware doesn't
require it from at least gen9+ onward. For older platforms, the plan
is to use cpu relocations only.
The igt side is fixed in igt commit 39e9aa1032a4e ("tests/i915: Remove
subtests that rely on async relocation behavior").
Chris Wilson [Thu, 6 Aug 2020 16:10:56 +0000 (17:10 +0100)]
drm/i915/gem: Free the fence after a fence-chain lookup failure
If dma_fence_chain_find_seqno() reports an error, it does so in its
preamble before it disposes of the input fence. On handling the
error, we need to drop the reference to the fence.
Chris Wilson [Thu, 6 Aug 2020 10:59:54 +0000 (11:59 +0100)]
drm/i915/gem: Reduce context termination list iteration guard to RCU
As we now protect the timeline list using RCU, we can drop the
timeline->mutex for guarding the list iteration during context close, as
we are searching for an inflight request. Any new request will see the
context is banned and not be submitted. In doing so, pull the checks for
a concurrent submission of the request (notably the
i915_request_completed()) under the engine spinlock, to fully serialise
with __i915_request_submit()). That is in the case of preempt-to-busy
where the request may be completed during the __i915_request_submit(),
we need to be careful that we sample the request status after
serialising so that we don't miss the request the engine is actually
submitting.
Fixes: 4a3174152147 ("drm/i915/gem: Refine occupancy test in kill_context()")
References: d22d2d073ef8 ("drm/i915: Protect i915_request_await_start from early waits") # rcu protection of timeline->requests
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1622
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2158 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200806105954.7766-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 6 Aug 2020 14:57:28 +0000 (15:57 +0100)]
drm/i915/selftests: Prevent selecting 0 for our random width/align
When igt_random_offset() is a given a range of [0, PAGE_SIZE], it is
allowed to return 0. However, attempting to use a size of 0 for the
igt_lmem_write_cpu() byte poking, leads to call igt_random_offset() with
a range of [offset, offset + 0] and ask it to find a length of 4 within
it. This triggers the bug on that the requested length should fit within
the range!
Chris Wilson [Sat, 1 Aug 2020 16:02:25 +0000 (17:02 +0100)]
drm/i915/gt: Hold context/request reference while breadcrumbs are active
Currently we hold no actual reference to the request nor context while
they are attached to a breadcrumb. To avoid freeing the request/context
too early, we serialise with cancel-breadcrumbs by taking the irq
spinlock in i915_request_retire(). The alternative is to take a
reference for a new breadcrumb and release it upon signaling; removing
the more frequently hit contention point in i915_request_retire().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200801160225.6814-2-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
kmalloc uses power-of-two slab buckets for small allocations (up to a
few pages). Since i915_page_directory is a page of pointers, plus a
couple more, this is rounded up to 8K, and we waste nearly 50% of that
allocation. Long terms this leads to poor memory utilisation, bloating
the kernel footprint, but the problem is exacerbated by our conservative
preallocation scheme for binding VMA. As we are required to allocate all
levels for each vma just in case we need to insert them upon binding,
this leads to a large multiplication factor for a single page vma. By
halving the allocation we need for the page directory structure, we
halve the impact of that factor, bringing workloads that once fitted into
memory, hopefully back to fitting into memory.
We maintain the split between i915_page_directory and i915_page_table as
we only need half the allocation for the lowest, most populous, level.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200729164219.5737-3-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 29 Jul 2020 16:42:18 +0000 (17:42 +0100)]
drm/i915/gt: Switch to object allocations for page directories
The GEM object is grossly overweight for the practicality of tracking
large numbers of individual pages, yet it is currently our only
abstraction for tracking DMA allocations. Since those allocations need
to be reserved upfront before an operation, and that we need to break
away from simple system memory, we need to ditch using plain struct page
wrappers.
In the process, we drop the WC mapping as we ended up clflushing
everything anyway due to various issues across a wider range of
platforms. Though in a future step, we need to drop the kmap_atomic
approach which suggests we need to pre-map all the pages and keep them
mapped.
v2: Verify our large scratch page is suitably DMA aligned; and manually
clear the scratch since we are allocating plain struct pages full of
prior content.
Chris Wilson [Wed, 29 Jul 2020 16:42:17 +0000 (17:42 +0100)]
drm/i915: Preallocate stashes for vma page-directories
We need to make the DMA allocations used for page directories to be
performed up front so that we can include those allocations in our
memory reservation pass. The downside is that we have to assume the
worst case, even before we know the final layout, and always allocate
enough page directories for this object, even when there will be overlap.
This unfortunately can be quite expensive, especially as we have to
clear/reset the page directories and DMA pages, but it should only be
required during early phases of a workload when new objects are being
discovered, or after memory/eviction pressure when we need to rebind.
Once we reach steady state, the objects should not be moved and we no
longer need to preallocating the pages tables.
It should be noted that the lifetime for the page directories DMA is
more or less decoupled from individual fences as they will be shared
across objects across timelines.
v2: Only allocate enough PD space for the PTE we may use, we do not need
to allocate PD that will be left as scratch.
v3: Store the shift unto the first PD level to encapsulate the different
PTE counts for gen6/gen8.
Chris Wilson [Fri, 31 Jul 2020 15:48:34 +0000 (16:48 +0100)]
drm/i915/gt: Distinguish the virtual breadcrumbs from the irq breadcrumbs
On the virtual engines, we only use the intel_breadcrumbs for tracking
signaling of stale breadcrumbs from the irq_workers. They do not have
any associated interrupt handling, active requests are passed to a
physical engine and associated breadcrumb interrupt handler. This causes
issues for us as we need to ensure that we do not actually try and
enable interrupts and the powermanagement required for them on the
virtual engine, as they will never be disabled. Instead, let's
specify the physical engine used for interrupt handler on a particular
breadcrumb.
v2: Drop b->irq_armed = true mocking for no interrupt HW
Fixes: 4fe6abb8f513 ("drm/i915/gt: Ignore irq enabling on the virtual engines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-4-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Fri, 31 Jul 2020 15:48:33 +0000 (16:48 +0100)]
drm/i915/gt: Only transfer the virtual context to the new engine if active
One more complication of preempt-to-busy with respect to the virtual
engine is that we may have retired the last request along the virtual
engine at the same time as preparing to submit the completed request to
a new engine. That submit will be shortcircuited, but not before we have
updated the context with the new register offsets and marked the virtual
engine as bound to the new engine (by calling swap on ve->siblings[]).
As we may have just retired the completed request, we may also be in the
middle of calling virtual_context_exit() to turn off the power management
associated with the virtual engine, and that in turn walks the
ve->siblings[]. If we happen to call swap() on the array as we walk, we
will call intel_engine_pm_put() twice on the same engine.
In this patch, we prevent this by only updating the bound engine after a
successful submission which weeds out the already completed requests.
Alternatively, we could walk a non-volatile array for the pm, such as
using the engine->mask. The small advantage to performing the update
after the submit is that we then only have to do a swap for active
requests.
Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
References: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine" Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: "Nayana, Venkata Ramana" <venkata.ramana.nayana@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-3-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
After staring at the breadcrumb enabling/cancellation and coming to the
conclusion that the cause of the mysterious stale breadcrumbs must the
act of submitting a completed requests, we can then redirect those
completed requests onto a dedicated signaled_list at the time of
construction and so eliminate intel_engine_transfer_stale_breadcrumbs().
Chris Wilson [Fri, 31 Jul 2020 15:48:31 +0000 (16:48 +0100)]
drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs
Since the breadcrumb enabling/cancelling itself is serialised by the
breadcrumbs.irq_lock, with a bit of care we can remove the outer
serialisation with i915_request.lock for concurrent
dma_fence_enable_signaling(). This has the important side-effect of
eliminating the nested i915_request.lock within request submission.
The challenge in serialisation is around the unsubmission where we take
an active request that wants a breadcrumb on the signaling engine and
put it to sleep. We do not want a concurrent
dma_fence_enable_signaling() to attach a breadcrumb as we unsubmit, so
we must mark the request as no longer active before serialising with the
concurrent enable-signaling.
On retire, we serialise with the concurrent enable-signaling, but
instead of clearing ACTIVE, we mark it as SIGNALED.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Fri, 31 Jul 2020 08:50:15 +0000 (09:50 +0100)]
drm/i915: Provide a fastpath for waiting on vma bindings
Before we can execute a request, we must wait for all of its vma to be
bound. This is a frequent operation for which we can optimise away a
few atomic operations (notably a cmpxchg) in lieu of the RCU protection.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-7-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>