Vladimir Oltean [Sat, 15 Apr 2023 17:05:48 +0000 (20:05 +0300)]
net: mscc: ocelot: don't rely on cached verify_status in ocelot_port_get_mm()
ocelot_mm_update_port_status() updates mm->verify_status, but when the
verification state of a port changes, an IRQ isn't emitted, but rather,
only when the verification state reaches one of the final states (like
DISABLED, FAILED, SUCCEEDED) - things that would affect mm->tx_active,
which is what the IRQ *is* actually emitted for.
That is to say, user space may miss reports of an intermediary MAC Merge
verification state (like from INITIAL to VERIFYING), unless there was an
IRQ notifying the driver of the change in mm->tx_active as well.
This is not a huge deal, but for reliable reporting to user space, let's
call ocelot_mm_update_port_status() synchronously from
ocelot_port_get_mm(), which makes user space see the current MM status.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 15 Apr 2023 17:05:47 +0000 (20:05 +0300)]
net: mscc: ocelot: optimize ocelot_mm_irq()
The MAC Merge IRQ of all ports is shared with the PTP TX timestamp IRQ
of all ports, which means that currently, when a PTP TX timestamp is
generated, felix_irq_handler() also polls for the MAC Merge layer status
of all ports, looking for changes. This makes the kernel do more work,
and under certain circumstances may make ptp4l require a
tx_timestamp_timeout argument higher than before.
Changes to the MAC Merge layer status are only to be expected under
certain conditions - its TX direction needs to be enabled - so we can
check early if that is the case, and omit register access otherwise.
Make ocelot_mm_update_port_status() skip register access if
mm->tx_enabled is unset, and also call it once more, outside IRQ
context, from ocelot_port_set_mm(), when mm->tx_enabled transitions from
true to false, because an IRQ is also expected in that case.
Also, a port may have its MAC Merge layer enabled but it may not have
generated the interrupt. In that case, there's no point in writing to
DEV_MM_STATUS to acknowledge that IRQ. We can reduce the number of
register writes per port with MM enabled by keeping an "ack" variable
which writes the "write-one-to-clear" bits. Those are 3 in number:
PRMPT_ACTIVE_STICKY, UNEXP_RX_PFRM_STICKY and UNEXP_TX_PFRM_STICKY.
The other fields in DEV_MM_STATUS are read-only and it doesn't matter
what is written to them, so writing zero is just fine.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unfortunately, the workarounds for the hardware bugs make it pointless
to keep fine-grained locking for the MAC Merge state of each port.
Our vsc9959_cut_through_fwd() implementation requires
ocelot->fwd_domain_lock to be held, in order to serialize with changes
to the bridging domains and to port speed changes (which affect which
ports can be cut-through). Simultaneously, the traffic classes which can
be cut-through cannot be preemptible at the same time, and this will
depend on the MAC Merge layer state (which changes from threaded
interrupt context).
Since vsc9959_cut_through_fwd() would have to hold the mm->lock of all
ports for a correct and race-free implementation with respect to
ocelot_mm_irq(), in practice it means that any time a port's mm->lock is
held, it would potentially block holders of ocelot->fwd_domain_lock.
In the interest of simple locking rules, make all MAC Merge layer state
changes (and preemptible traffic class changes) be serialized by the
ocelot->fwd_domain_lock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 15 Apr 2023 17:05:45 +0000 (20:05 +0300)]
net: mscc: ocelot: export a single ocelot_mm_irq()
When the switch emits an IRQ, we don't know what caused it, and we
iterate through all ports to check the MAC Merge status.
Move that iteration inside the ocelot lib; we will change the locking in
a future change and it would be good to encapsulate that lock completely
within the ocelot lib.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leon Romanovsky [Thu, 13 Apr 2023 12:29:27 +0000 (15:29 +0300)]
net/mlx5e: Create IPsec table with tunnel support only when encap is disabled
Current hardware doesn't support double encapsulation which is
happening when IPsec packet offload tunnel mode is configured
together with eswitch encap option.
Any user attempt to add new SA/policy after he/she sets encap mode, will
generate the following FW syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 1904): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0xa43321), err(-22)
Make sure that we block encap changes before creating flow steering tables.
This is applicable only for packet offload in tunnel mode, while packet
offload in transport mode and crypto offload, don't have such limitation
as they don't perform encapsulation.
Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leon Romanovsky [Thu, 13 Apr 2023 12:29:26 +0000 (15:29 +0300)]
net/mlx5: Allow blocking encap changes in eswitch
Existing eswitch encap option enables header encapsulation. Unfortunately
currently available hardware isn't able to perform double encapsulation,
which can happen once IPsec packet offload tunnel mode is used together
with encap mode set to BASIC.
So as a solution for misconfiguration, provide an option to block encap
changes, which will be used for IPsec packet offload.
Reviewed-by: Emeel Hakim <ehakim@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leon Romanovsky [Thu, 13 Apr 2023 12:29:25 +0000 (15:29 +0300)]
net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode
In IPsec packet offload mode all header manipulations are performed by
hardware, which is responsible to add/remove L2 header with source and
destinations MACs.
CX-7 devices don't support offload of in-kernel routing functionality,
as such HW needs external help to fill other side MAC as it isn't
available for HW.
As a solution, let's listen to neigh ARP updates and reconfigure IPsec
rules on the fly once new MAC data information arrives.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From time to time, it was observed that the nanosecond part of the
received timestamp, which is extracted from the IFH, it was actually
bigger than 1 second. So then when actually calculating the full
received timestamp, based on the nanosecond part from IFH and the second
part which is read from HW, it was actually wrong.
The issue seems to be inside the function lan966x_ifh_get, which
extracts information from an IFH(which is an byte array) and returns the
value in a u64. When extracting the timestamp value from the IFH, which
starts at bit 192 and have the size of 32 bits, then if the most
significant bit was set in the timestamp, then this bit was extended
then the return value became 0xffffffff... . And the reason of this is
because constants without any postfix are treated as signed longs and
that is the reason why '1 << 31' becomes 0xffffffff80000000.
This is fixed by adding the postfix 'ULL' to 1.
Fixes: fd7627833ddf ("net: lan966x: Stop using packing library") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 17 Apr 2023 07:28:21 +0000 (08:28 +0100)]
Merge branch 'sctp-info-dump'
Xin Long says:
====================
sctp: add some missing peer_capables in sctp info dump
The 1st patch removes the unused and obsolete hostname_address from
sctp_association peer and also the bit from sctp_info peer_capables,
and then reuses its bit for reconf_capable and use the higher
available bit for intl_capable in the 2nd patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 14 Apr 2023 21:21:16 +0000 (17:21 -0400)]
sctp: add intl_capable and reconf_capable in ss peer_capable
There are two new peer capables have been added since sctp_diag was
introduced into SCTP. When dumping the peer capables, these two new
peer capables should also be included. To not break the old capables,
reconf_capable takes the old hostname_address bit, and intl_capable
uses the higher available bit in sctpi_peer_capable.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 14 Apr 2023 21:21:15 +0000 (17:21 -0400)]
sctp: delete the obsolete code for the host name address param
In the latest RFC9260, the Host Name Address param has been deprecated.
For INIT chunk:
Note 3: An INIT chunk MUST NOT contain the Host Name Address
parameter. The receiver of an INIT chunk containing a Host Name
Address parameter MUST send an ABORT chunk and MAY include an
"Unresolvable Address" error cause.
For Supported Address Types:
The value indicating the Host Name Address parameter MUST NOT be
used when sending this parameter and MUST be ignored when receiving
this parameter.
Currently Linux SCTP doesn't really support Host Name Address param,
but only saves some flag and print debug info, which actually won't
even be triggered due to the verification in sctp_verify_param().
This patch is to delete those dead code.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the code had an issue according to ShellCheck.
That's mainly due to the fact it incorrectly believes most of the code
was unreachable because it's invoked by variable name, see how the
"tests" array is used.
Once SC2317 has been ignored, three small warnings were still visible:
- SC2155: Declare and assign separately to avoid masking return values.
- SC2046: Quote this to prevent word splitting: can be ignored because
"ip netns pids" can display more than one pid.
- SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
This probably didn't fix any actual issues but it might help spotting
new interesting warnings reported by ShellCheck as just before,
ShellCheck was reporting issues for most lines making it a bit useless.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
selftests: mptcp: remove duplicated entries in usage
mptcp_connect tool was printing some duplicated entries when showing how
to use it: -j -l -r
While at it, I also:
- moved the very few entries that were not sorted,
- added -R that was missing since
commit 8a4b910d005d ("mptcp: selftests: add rcvbuf set option"),
- removed the -u parameter that has been removed in
commit f730b65c9d85 ("selftests: mptcp: try to set mptcp ulp mode in different sk states").
No need to backport this, it is just an internal tool used by our
selftests. The help menu is mainly useful for MPTCP kernel devs.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
This will help occasional developers to find our git repo without having
to look at our wiki.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp: make userspace_pm_append_new_local_addr static
mptcp_userspace_pm_append_new_local_addr() has always exclusively been
used in pm_userspace.c since its introduction in
commit 4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs").
So make it static.
Signed-off-by: Geliang Tang <geliang.tang@suse.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 17 Apr 2023 07:18:34 +0000 (08:18 +0100)]
Merge branch 'mptcp-subflow-init'
Matthieu Baerts says:
====================
mptcp: refactor first subflow init
This series refactors the initialisation of the first subflow of a
listen socket. The first subflow allocation is no longer done at the
initialisation of the socket but later, when the connection request is
received or when requested by the userspace.
This is needed not just because Paolo likes to refactor things but
because this simplifies the code and makes the behaviour more consistent
with the rest. Also, this is a prerequisite for future patches adding
proper support of SELinux/LSM labels with MPTCP and accept(2).
In [1], Ondrej Mosnacek explained they discovered the (userspace-facing)
sockets returned by accept(2) when using MPTCP always end up with the
label representing the kernel (typically system_u:system_r:kernel_t:s0),
while it would make more sense to inherit the context from the parent
socket (the one that is passed to accept(2)).
Before being able to properly support that on SELinux/LSM side, patches
2-3/5 prepare the code to simplify the patch 4/5 moving the allocation.
Patch 1/5 is a small clean-up seen while working on the series and patch
5/5 is a small improvement when closing unaccepted sockets.
Paolo Abeni [Fri, 14 Apr 2023 14:08:04 +0000 (16:08 +0200)]
mptcp: fastclose msk when cleaning unaccepted sockets
When cleaning up unaccepted mptcp socket still laying inside
the listener queue at listener close time, such sockets will
go through a regular close, waiting for a timeout before
shutting down the subflows.
There is no need to keep the kernel resources in use for
such a possibly long time: short-circuit to fast-close.
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 14 Apr 2023 14:08:03 +0000 (16:08 +0200)]
mptcp: move first subflow allocation at mpc access time
In the long run this will simplify the mptcp code and will
allow for more consistent behavior. Move the first subflow
allocation out of the sock->init ops into the __mptcp_nmpc_socket()
helper.
Since the first subflow creation can now happen after the first
setsockopt() we additionally need to invoke mptcp_sockopt_sync()
on it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
So that we can avoid a bunch of check in fastpath. Additionally we
can specialize such check according to the specific fastopen method
- defer_connect vs MSG_FASTOPEN.
The latter bits will simplify the next patches.
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 14 Apr 2023 14:08:01 +0000 (16:08 +0200)]
mptcp: avoid unneeded __mptcp_nmpc_socket() usage
In a few spots, the mptcp code invokes the __mptcp_nmpc_socket() helper
multiple times under the same socket lock scope. Additionally, in such
places, the socket status ensures that there is no MP capable handshake
running.
Under the above condition we can replace the later __mptcp_nmpc_socket()
helper invocation with direct access to the msk->subflow pointer and
better document such access is not supposed to fail with WARN().
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 14 Apr 2023 14:08:00 +0000 (16:08 +0200)]
mptcp: drop unneeded argument
After commit 3a236aef280e ("mptcp: refactor passive socket initialization"),
every mptcp_pm_fully_established() call is always invoked with a
GFP_ATOMIC argument. We can then drop it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 17 Apr 2023 07:14:21 +0000 (08:14 +0100)]
Merge tag 'mlx5-updates-2023-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2023-04-14
Yevgeny Kliteynik Says:
=======================
SW Steering: Support pattern/args modify_header actions
The following patch series adds support for a new pattern/arguments type
of modify_header actions.
Starting with ConnectX-6 DX, we use a new design of modify_header FW object.
The current modify_header object allows for having only limited number of
these FW objects, which means that we are limited in the number of offloaded
flows that require modify_header action.
The new approach comprises of two types of objects: pattern and argument.
Pattern holds header modification templates, later used with corresponding
argument object to create complete header modification actions.
The pattern indicates which headers are modified, while the arguments
provide the specific values.
Therefore a single pattern can be used with different arguments in different
flows, enabling offloading of large number of modify_header flows.
- Patch 1, 2: Add ICM pool for modify-header-pattern objects and implement
patterns cache, allowing patterns reuse for different flows
- Patch 3: Allow for chunk allocation separately for STEv0 and STEv1
- Patch 4: Read related device capabilities
- Patch 5: Add create/destroy functions for the new general object type
- Patch 6: Add support for writing modify header argument to ICM
- Patch 7, 8: Some required fixes to support pattern/arg - separate read
buffer from the write buffer and fix QP continuous allocation
- Patch 9: Add pool for modify header arg objects
- Patch 10, 11, 12: Implement MODIFY_HEADER and TNL_L3_TO_L2 actions with
the new patterns/args design
- Patch 13: Optimization - set modify header action of size 1 directly on
the STE instead of separate pattern/args combination
- Patch 14: Adjust debug dump for patterns/args
- Patch 15: Enable patterns and arguments for supporting devices
David S. Miller [Mon, 17 Apr 2023 07:12:33 +0000 (08:12 +0100)]
Merge branch 'ovs-selftests'
Aaron Conole says:
====================
selftests: openvswitch: add support for testing upcall interface
The existing selftest suite for openvswitch will work for regression
testing the datapath feature bits, but won't test things like adding
interfaces, or the upcall interface. Here, we add some additional
test facilities.
First, extend the ovs-dpctl.py python module to support the OVS_FLOW
and OVS_PACKET netlink families, with some associated messages. These
can be extended over time, but the initial support is for more well
known cases (output, userspace, and CT).
Next, extend the test suite to test upcalls by adding a datapath,
monitoring the upcall socket associated with the datapath, and then
dumping any upcalls that are received. Compare with expected ARP
upcall via arping.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a basic set of fields to print in a 'dpflow' format. This will be
used by future commits to check for flow fields after parsing, as
well as verifying the flow fields pushed into the kernel from
userspace.
Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
If the 1PPS output was enabled and then lan8841 was configured to be a
follower, then target clock which is used to generate the 1PPS was not
configure correctly. The problem was that for each adjustments of the
time, also the nanosecond part of the target clock was changed.
Therefore the initial nanosecond part of the target clock was changed.
The issue can be observed if both the leader and the follower are
generating 1PPS and see that their PPS are not aligned even if the time
is allined.
The fix consists of not modifying the nanosecond part of the target
clock when adjusting the time. In this way the 1PPS get also aligned.
Fixes: e4ed8ba08e3f ("net: phy: micrel: Add support for PTP_PF_PEROUT for lan8841") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
page_pool: allow caching from safely localized NAPI
I went back to the explicit "are we in NAPI method", mostly
because I don't like having both around :( (even tho I maintain
that in_softirq() && !in_hardirq() is as safe, as softirqs do
not nest).
Still returning the skbs to a CPU, tho, not to the NAPI instance.
I reckon we could create a small refcounted struct per NAPI instance
which would allow sockets and other users so hold a persisent
and safe reference. But that's a bigger change, and I get 90+%
recycling thru the cache with just these patches (for RR and
streaming tests with 100% CPU use it's almost 100%).
Some numbers for streaming test with 100% CPU use (from previous version,
but really they perform the same):
HW-GRO page=page
before after before after
recycle:
cached: 0 138669686 0 150197505
cache_full: 0 223391 0 74582
ring: 1385519339997191149299454 0
ring_full: 0 488 3154 127590
released_refcnt: 0 0 0 0
Jakub Kicinski [Thu, 13 Apr 2023 04:26:04 +0000 (21:26 -0700)]
page_pool: allow caching from safely localized NAPI
Recent patches to mlx5 mentioned a regression when moving from
driver local page pool to only using the generic page pool code.
Page pool has two recycling paths (1) direct one, which runs in
safe NAPI context (basically consumer context, so producing
can be lockless); and (2) via a ptr_ring, which takes a spin
lock because the freeing can happen from any CPU; producer
and consumer may run concurrently.
Since the page pool code was added, Eric introduced a revised version
of deferred skb freeing. TCP skbs are now usually returned to the CPU
which allocated them, and freed in softirq context. This places the
freeing (producing of pages back to the pool) enticingly close to
the allocation (consumer).
If we can prove that we're freeing in the same softirq context in which
the consumer NAPI will run - lockless use of the cache is perfectly fine,
no need for the lock.
Let drivers link the page pool to a NAPI instance. If the NAPI instance
is scheduled on the same CPU on which we're freeing - place the pages
in the direct cache.
With that and patched bnxt (XDP enabled to engage the page pool, sigh,
bnxt really needs page pool work :() I see a 2.6% perf boost with
a TCP stream test (app on a different physical core than softirq).
The CPU use of relevant functions decreases as expected:
Only consider lockless path to be safe when NAPI is scheduled
- in practice this should cover majority if not all of steady state
workloads. It's usually the NAPI kicking in that causes the skb flush.
The main case we'll miss out on is when application runs on the same
CPU as NAPI. In that case we don't use the deferred skb free path.
Jakub Kicinski [Thu, 13 Apr 2023 04:26:03 +0000 (21:26 -0700)]
net: skb: plumb napi state thru skb freeing paths
We maintain a NAPI-local cache of skbs which is fed by napi_consume_skb().
Going forward we will also try to cache head and data pages.
Plumb the "are we in a normal NAPI context" information thru
deeper into the freeing path, up to skb_release_data() and
skb_free_head()/skb_pp_recycle(). The "not normal NAPI context"
comes from netpoll which passes budget of 0 to try to reap
the Tx completions but not perform any Rx.
Use "bool napi_safe" rather than bare "int budget",
the further we get from NAPI the more confusing the budget
argument may seem (particularly whether 0 or MAX is the
correct value to pass in when not in NAPI).
net/mlx5: DR, Apply new accelerated modify action and decapl3
If there is support for pattern/args, use the new accelerated modify
header action for modify header and decap L3 actions.
Otherwise fall back to the old modify-header implementation.
net/mlx5: DR, Add modify header argument pointer to actions attributes
While building the actions, add the pointer of the arguments for
accelerated modify list action into the action's attributes.
This will be used later on while building the specific STE
for this action.
net/mlx5: DR, Add modify header arg pool mechanism
Added new mechanism for handling arguments for modify-header action.
The new action "accelerated modify-header" asks for the arguments from
separated area from the pattern, this area accessed via general objects.
Handling of these object is done via the pool-manager struct.
When the new header patterns are supported, while loading the domain,
a few pools for argument creations will be created. The requests for
allocating/deallocating arg objects are done via the pool manager API.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When allocating a QP we allocate an RQ and an SQ, the RQ is stored first
in memory and followed by the SQ.
This allocation is not physically continiuos - it may span across different
physical pages. SW Steering code always writes in pairs: 1BB write + 1BB read,
or 2 continuous BBs of GTA WQE.
This lead to an issue where RQ allocation was 4x16 which is equal to 1 WQE BB,
causing 1 BB offset in the page and splitting the GTA WQE between different
physical pages.
The solution was to create the RQ with a even number of BBs and to have the
RQ aligned to a page.
net/mlx5: DR, Read ICM memory into dedicated buffer
Instead of using the write buffer for reading we will use a dedicated
buffer only for reading ICM memory.
Due to the new support for args, we can have a case with pending_wc
being odd number, and with reading into the same write buffer, it is
possible to overwrite next write on the same slot.
For example:
pending_wc is 17 so the buffer for write is:
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
and we have requests as follows:
r wr wr wr wr wr wr wr wr
Now, the first read will be written into the last write because we use
the same buffer for read and write, before it was written to the HW and
we will have a wrong data in the ICM area.
net/mlx5: DR, Add support for writing modify header argument
The accelerated modify header arguments are written in the HW area
with special WQE and specific data format.
New function was added to support writing of new argument type.
Note that GTA WQE is larger than READ and WRITE, so the queue
management logic was updated to support this.
net/mlx5: DR, Split chunk allocation to HW-dependent ways
This way we are able to allocate chunk for modify_headers from 2 types:
STEv0 that is allocated from the action area, and STEv1 that is allocating
the chunks from the special area for patterns.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Starting with ConnectX-6 Dx, we use new design of modify_header FW object.
The current modify_header object allows for having only limited number
of FW objects, so the new design of pattern and argument allows pattern
reuse, saving memory, and having a large number of modify_header objects.
David S. Miller [Fri, 14 Apr 2023 10:09:27 +0000 (11:09 +0100)]
Merge branch 'msg_control-split'
Kevin Brodsky says:
====================
net: Finish up ->msg_control{,_user} split
Commit 1f466e1f15cf ("net: cleanly handle kernel vs user buffers for
->msg_control") introduced the msg_control_user and
msg_control_is_user fields in struct msghdr, to ensure that user
pointers are represented as such. It also took care of converting most
users of struct msghdr::msg_control where user pointers are involved. It
did however miss a number of cases, and some code using msg_control
inappropriately has also appeared in the meantime.
This series is attempting to complete the split, by eliminating the
remaining cases where msg_control is used when in fact a user
pointer is stored in the union (patch 1).
It also addresses a couple of issues with msg_control_is_user: one where
it is not updated as it should (patch 2), and one where it is not
initialised (patch 3).
v1..v2:
* Split out the msg_control_is_user fixes into separate patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Brodsky [Thu, 13 Apr 2023 11:47:05 +0000 (12:47 +0100)]
net/ipv6: Initialise msg_control_is_user
do_ipv6_setsockopt() makes use of struct msghdr::msg_control in the
IPV6_2292PKTOPTIONS case. Make sure to initialise
msg_control_is_user accordingly.
Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Brodsky [Thu, 13 Apr 2023 11:47:04 +0000 (12:47 +0100)]
net/compat: Update msg_control_is_user when setting a kernel pointer
cmsghdr_from_user_compat_to_kern() is an unusual case w.r.t. how
the kmsg->msg_control* fields are used. The input struct msghdr
holds a pointer to a user buffer, i.e. ksmg->msg_control_user is
active. However, upon success, a kernel pointer is stored in
kmsg->msg_control. kmsg->msg_control_is_user should therefore be
updated accordingly.
Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Brodsky [Thu, 13 Apr 2023 11:47:03 +0000 (12:47 +0100)]
net: Ensure ->msg_control_user is used for user buffers
Since commit 1f466e1f15cf ("net: cleanly handle kernel vs user
buffers for ->msg_control"), pointers to user buffers should be
stored in struct msghdr::msg_control_user, instead of the
msg_control field. Most users of msg_control have already been
converted (where user buffers are involved), but not all of them.
This patch attempts to address the remaining cases. An exception is
made for null checks, as it should be safe to use msg_control
unconditionally for that purpose.
Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
vsock/loopback: don't disable irqs for queue access
This replaces 'skb_queue_tail()' with 'virtio_vsock_skb_queue_tail()'.
The first one uses 'spin_lock_irqsave()', second uses 'spin_lock_bh()'.
There is no need to disable interrupts in the loopback transport as
there is no access to the queue with skbs from interrupt context. Both
virtio and vhost transports work in the same way.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
During probe, get the hardware-allowed max MTU by querying the device
configuration. Users can select MTU up to the device limit.
When XDP is in use, limit MTU settings so the buffer size is within
one page. And, when MTU is set to a too large value, XDP is not allowed
to run.
Also, to prevent changing MTU fails, and leaves the NIC in a bad state,
pre-allocate all buffers before starting the change. So in low memory
condition, it will return error, without affecting the NIC.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: mana: Enable RX path to handle various MTU sizes
Update RX data path to allocate and use RX queue DMA buffers with
proper size based on potentially various MTU sizes.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: mana: Refactor RX buffer allocation code to prepare for various MTU
Move out common buffer allocation code from mana_process_rx_cqe() and
mana_alloc_rx_wqe() to helper functions.
Refactor related variables so they can be changed in one place, and buffer
sizes are in sync.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Use napi_build_skb() instead of build_skb() to take advantage of the
NAPI percpu caches to obtain skbuff_head.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 14 Apr 2023 05:28:03 +0000 (22:28 -0700)]
Merge tag 'mlx5-updates-2023-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-04-11
1) Vlad adds the support for linux bridge multicast offload support
Patches #1 through #9
Synopsis
Vlad Says:
==============
Implement support of bridge multicast offload in mlx5. Handle port object
attribute SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED notification to toggle multicast
offload and bridge snooping support on bridge. Handle port object
SWITCHDEV_OBJ_ID_PORT_MDB notification to attach a bridge port to MDB.
Steering architecture
Existing offload infrastructure relies on two levels of flow tables - bridge
ingress and egress. For multicast offload the architecture is extended with
additional layer of per-port multicast replication tables. Such tables filter
loopback traffic (so packets are not replicated to their source port) and pop
VLAN headers for "untagged" VLANs. The tables are referenced by the MDB rules in
egress table. MDB egress rule can point to multiple per-port multicast tables,
which causes matching multicast traffic to be replicated to all of them, and,
consecutively, to several bridge ports:
- Patch 1 adds hardware definition bits for capabilities required to replicate
multicast packets to multiple per-port tables. These bits are used by
following patches to only attempt multicast offload if firmware and hardware
provide necessary support.
- Pathces 2-4 patches are preparations and refactoring.
- Patch 5 implements necessary infrastructure to toggle multicast offload
via SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED port object attribute notification.
This also enabled IGMP and MLD snooping.
- Patch 6 implements per-port multicast replication tables. It only supports
filtering of loopback packets.
- Patch 7 extends per-port multicast tables with VLAN pop support for 'untagged'
VLANs.
- Patch 8 handles SWITCHDEV_OBJ_ID_PORT_MDB port object notifications. It
creates MDB replication rules in egress table that can replicate packets to
multiple per-port multicast tables.
- Patch 9 adds tracepoints for MDB events.
==============
2) Parav Create a new allocation profile for SFs, to save on memory
3) Yevgeny provides some initial patches for upcoming software steering
support new pattern/arguments type of modify_header actions.
Starting with ConnectX-6 DX, we use a new design of modify_header FW object.
The current modify_header object allows for having only limited number of
these FW objects, which means that we are limited in the number of offloaded
flows that require modify_header action.
As a preparation Yevgeny provides the following 4 patches:
- Patch 1: Add required mlx5_ifc HW bits
- Patch 2, 3: Add new WQE type and opcode that is required for pattern/arg
support and adds appropriate support in dr_send.c
- Patch 4: Add ICM pool for modify-header-pattern objects and implement
patterns cache, allowing patterns reuse for different flows
* tag 'mlx5-updates-2023-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: DR, Add modify-header-pattern ICM pool
net/mlx5: DR, Prepare sending new WQE type
net/mlx5: Add new WQE for updating flow table
net/mlx5: Add mlx5_ifc bits for modify header argument
net/mlx5: DR, Set counter ID on the last STE for STEv1 TX
net/mlx5: Create a new profile for SFs
net/mlx5: Bridge, add tracepoints for multicast
net/mlx5: Bridge, implement mdb offload
net/mlx5: Bridge, support multicast VLAN pop
net/mlx5: Bridge, add per-port multicast replication tables
net/mlx5: Bridge, snoop igmp/mld packets
net/mlx5: Bridge, extract code to lookup parent bridge of port
net/mlx5: Bridge, move additional data structures to priv header
net/mlx5: Bridge, increase bridge tables sizes
net/mlx5: Add mlx5_ifc definitions for bridge multicast support
====================
====================
Add kernel tc-mqprio and tc-taprio support for preemptible traffic classes
The last RFC in August 2022 contained a proposal for the UAPI of both
TSN standards which together form Frame Preemption (802.1Q and 802.3):
https://lore.kernel.org/netdev/20220816222920.1952936-1-vladimir.oltean@nxp.com/
It wasn't clear at the time whether the 802.1Q portion of Frame Preemption
should be exposed via the tc qdisc (mqprio, taprio) or via some other
layer (perhaps also ethtool like the 802.3 portion, or dcbnl), even
though the options were discussed extensively, with pros and cons:
https://lore.kernel.org/netdev/20220816222920.1952936-3-vladimir.oltean@nxp.com/
So the 802.3 portion got submitted separately and finally was accepted:
https://lore.kernel.org/netdev/20230119122705.73054-1-vladimir.oltean@nxp.com/
leaving the only remaining question: how do we expose the 802.1Q bits?
This series proposes that we use the Qdisc layer, through separate
(albeit very similar) UAPI in mqprio and taprio, and that both these
Qdiscs pass the information down to the offloading device driver through
the common mqprio offload structure (which taprio also passes).
An implementation is provided for the NXP LS1028A on-board Ethernet
endpoint (enetc). Previous versions also contained support for its
embedded switch (felix), but this needs more work and will be submitted
separately.
Vladimir Oltean [Tue, 11 Apr 2023 18:01:57 +0000 (21:01 +0300)]
net: enetc: add support for preemptible traffic classes
PFs which support the MAC Merge layer also have a set of 8 registers
called "Port traffic class N frame preemption register (PTC0FPR - PTC7FPR)".
Through these, a traffic class (group of TX rings of same dequeue
priority) can be mapped to the eMAC or to the pMAC.
There's nothing particularly spectacular here. We should probably only
commit the preemptible TCs to hardware once the MAC Merge layer became
active, but unlike Felix, we don't have an IRQ that notifies us of that.
We'd have to sleep for up to verifyTime (127 ms) to wait for a
resolution coming from the verification state machine; not only from the
ndo_setup_tc() code path, but also from enetc_mm_link_state_update().
Since it's relatively complicated and has a relatively small benefit,
I'm not doing it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 11 Apr 2023 18:01:56 +0000 (21:01 +0300)]
net: enetc: rename "mqprio" to "qopt"
To gain access to the larger encapsulating structure which has the type
tc_mqprio_qopt_offload, rename just the "qopt" field as "qopt".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 11 Apr 2023 18:01:55 +0000 (21:01 +0300)]
net/sched: taprio: allow per-TC user input of FP adminStatus
This is a duplication of the FP adminStatus logic introduced for
tc-mqprio. Offloading is done through the tc_mqprio_qopt_offload
structure embedded within tc_taprio_qopt_offload. So practically, if a
device driver is written to treat the mqprio portion of taprio just like
standalone mqprio, it gets unified handling of frame preemption.
I would have reused more code with taprio, but this is mostly netlink
attribute parsing, which is hard to transform into generic code without
having something that stinks as a result. We have the same variables
with the same semantics, just different nlattr type values
(TCA_MQPRIO_TC_ENTRY=5 vs TCA_TAPRIO_ATTR_TC_ENTRY=12;
TCA_MQPRIO_TC_ENTRY_FP=2 vs TCA_TAPRIO_TC_ENTRY_FP=3, etc) and
consequently, different policies for the nest.
Every time nla_parse_nested() is called, an on-stack table "tb" of
nlattr pointers is allocated statically, up to the maximum understood
nlattr type. That array size is hardcoded as a constant, but when
transforming this into a common parsing function, it would become either
a VLA (which the Linux kernel rightfully doesn't like) or a call to the
allocator.
Having FP adminStatus in tc-taprio can be seen as addressing the 802.1Q
Annex S.3 "Scheduling and preemption used in combination, no HOLD/RELEASE"
and S.4 "Scheduling and preemption used in combination with HOLD/RELEASE"
use cases. HOLD and RELEASE events are emitted towards the underlying
MAC Merge layer when the schedule hits a Set-And-Hold-MAC or a
Set-And-Release-MAC gate operation. So within the tc-taprio UAPI space,
one can distinguish between the 2 use cases by choosing whether to use
the TC_TAPRIO_CMD_SET_AND_HOLD and TC_TAPRIO_CMD_SET_AND_RELEASE gate
operations within the schedule, or just TC_TAPRIO_CMD_SET_GATES.
A small part of the change is dedicated to refactoring the max_sdu
nlattr parsing to put all logic under the "if" that tests for presence
of that nlattr.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 11 Apr 2023 18:01:54 +0000 (21:01 +0300)]
net/sched: mqprio: allow per-TC user input of FP adminStatus
IEEE 802.1Q-2018 clause 6.7.2 Frame preemption specifies that each
packet priority can be assigned to a "frame preemption status" value of
either "express" or "preemptible". Express priorities are transmitted by
the local device through the eMAC, and preemptible priorities through
the pMAC (the concepts of eMAC and pMAC come from the 802.3 MAC Merge
layer).
The FP adminStatus is defined per packet priority, but 802.1Q clause
12.30.1.1.1 framePreemptionAdminStatus also says that:
| Priorities that all map to the same traffic class should be
| constrained to use the same value of preemption status.
It is impossible to ignore the cognitive dissonance in the standard
here, because it practically means that the FP adminStatus only takes
distinct values per traffic class, even though it is defined per
priority.
I can see no valid use case which is prevented by having the kernel take
the FP adminStatus as input per traffic class (what we do here).
In addition, this also enforces the above constraint by construction.
User space network managers which wish to expose FP adminStatus per
priority are free to do so; they must only observe the prio_tc_map of
the netdev (which presumably is also under their control, when
constructing the mqprio netlink attributes).
The reason for configuring frame preemption as a property of the Qdisc
layer is that the information about "preemptible TCs" is closest to the
place which handles the num_tc and prio_tc_map of the netdev. If the
UAPI would have been any other layer, it would be unclear what to do
with the FP information when num_tc collapses to 0. A key assumption is
that only mqprio/taprio change the num_tc and prio_tc_map of the netdev.
Not sure if that's a great assumption to make.
Having FP in tc-mqprio can be seen as an implementation of the use case
defined in 802.1Q Annex S.2 "Preemption used in isolation". There will
be a separate implementation of FP in tc-taprio, for the other use
cases.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 11 Apr 2023 18:01:53 +0000 (21:01 +0300)]
net/sched: pass netlink extack to mqprio and taprio offload
With the multiplexed ndo_setup_tc() model which lacks a first-class
struct netlink_ext_ack * argument, the only way to pass the netlink
extended ACK message down to the device driver is to embed it within the
offload structure.
Do this for struct tc_mqprio_qopt_offload and struct tc_taprio_qopt_offload.
Since struct tc_taprio_qopt_offload also contains a tc_mqprio_qopt_offload
structure, and since device drivers might effectively reuse their mqprio
implementation for the mqprio portion of taprio, we make taprio set the
extack in both offload structures to point at the same netlink extack
message.
In fact, the taprio handling is a bit more tricky, for 2 reasons.
First is because the offload structure has a longer lifetime than the
extack structure. The driver is supposed to populate the extack
synchronously from ndo_setup_tc() and leave it alone afterwards.
To not have any use-after-free surprises, we zero out the extack pointer
when we leave taprio_enable_offload().
The second reason is because taprio does overwrite the extack message on
ndo_setup_tc() error. We need to switch to the weak form of setting an
extack message, which preserves a potential message set by the driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 11 Apr 2023 18:01:52 +0000 (21:01 +0300)]
net/sched: mqprio: add an extack message to mqprio_parse_opt()
Ferenc reports that a combination of poor iproute2 defaults and obscure
cases where the kernel returns -EINVAL make it difficult to understand
what is wrong with this command:
$ ip link add veth0 numtxqueues 8 numrxqueues 8 type veth peer name veth1
$ tc qdisc add dev veth0 root mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7
RTNETLINK answers: Invalid argument
Hopefully with this patch, the cause is clearer:
Error: Device does not support hardware offload.
The kernel was (and still is) rejecting this because iproute2 defaults
to "hw 1" if this command line option is not specified.
Vladimir Oltean [Tue, 11 Apr 2023 18:01:51 +0000 (21:01 +0300)]
net/sched: mqprio: add extack to mqprio_parse_nlattr()
Netlink attribute parsing in mqprio is a minesweeper game, with many
options having the possibility of being passed incorrectly and the user
being none the wiser.
Try to make errors less sour by giving user space some information
regarding what went wrong.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 11 Apr 2023 18:01:50 +0000 (21:01 +0300)]
net/sched: mqprio: simplify handling of nlattr portion of TCA_OPTIONS
In commit 4e8b86c06269 ("mqprio: Introduce new hardware offload mode and
shaper in mqprio"), the TCA_OPTIONS format of mqprio was extended to
contain a fixed portion (of size NLA_ALIGN(sizeof struct tc_mqprio_qopt))
and a variable portion of other nlattrs (in the TCA_MQPRIO_* type space)
following immediately afterwards.
In commit feb2cf3dcfb9 ("net/sched: mqprio: refactor nlattr parsing to a
separate function"), we've moved the nlattr handling to a smaller
function, but yet, a small parse_attr() still remains, and the larger
mqprio_parse_nlattr() still does not have access to the beginning, and
the length, of the TCA_OPTIONS region containing these other nlattrs.
In a future change, the mqprio qdisc will need to iterate through this
nlattr region to discover other attributes, so eliminate parse_attr()
and add 2 variables in mqprio_parse_nlattr() which hold the beginning
and the length of the nlattr range.
We avoid the need to memset when nlattr_opt_len has insufficient length
by pre-initializing the table "tb".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 11 Apr 2023 18:01:49 +0000 (21:01 +0300)]
net: ethtool: create and export ethtool_dev_mm_supported()
Create a wrapper over __ethtool_dev_mm_supported() which also calls
ethnl_ops_begin() and ethnl_ops_complete(). It can be used by other code
layers, such as tc, to make sure that preemptible TCs are supported
(this is true if an underlying MAC Merge layer exists).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make it explicit that this tool is not a drop-in replacement for ethtool.
This tool is intended for testing ethtool functionality implemented in the
kernel and should use a name that differentiates it from the ethtool
utility.
tools: ynl: Remove absolute paths to yaml files from ethtool testing tool
Absolute paths for the spec and schema files make the ethtool testing tool
unusable with freshly checked-out source trees. Replace absolute paths with
relative paths for both files in the Documentation/ directory.
Issue seen before the change
Traceback (most recent call last):
File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/./ethtool", line 424, in <module>
main()
File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/./ethtool", line 158, in main
ynl = YnlFamily(spec, schema)
File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/lib/ynl.py", line 342, in __init__
super().__init__(def_path, schema)
File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/lib/nlspec.py", line 333, in __init__
with open(spec_path, "r") as stream:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/google/home/sdf/src/linux/Documentation/netlink/specs/ethtool.yaml'
The seconds input from BD (6 bits) just needs to be ORed with the
upper bits from timer in this function. Avoid addition operation
every single time. Seconds rollover handling is left untouched.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable transmission and reception of PTP unicast packets by
updating PTP unicast config bit and setting current HW mac
address as allowed address in PTP unicast filter registers.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are currently two checks for PTP functionality - one on GEM
capability and another on the kernel config option. Combine them
into a single function as there's no use case where gem_has_ptp is
TRUE and MACB_USE_HWSTAMP is false.
Signed-off-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 14 Apr 2023 04:56:08 +0000 (21:56 -0700)]
Merge branch 'ocelot-felix-driver-cleanup'
Vladimir Oltean says:
====================
Ocelot/Felix driver cleanup
The cleanup mostly handles the statistics code path - some issues
regarding understandability became apparent after the series
"Fix trainwreck with Ocelot switch statistics counters":
https://lore.kernel.org/netdev/20230321010325.897817-1-vladimir.oltean@nxp.com/
There is also one patch which cleans up a misleading comment
in the DSA felix_setup().
====================
Vladimir Oltean [Wed, 12 Apr 2023 12:47:37 +0000 (15:47 +0300)]
net: mscc: ocelot: fix ineffective WARN_ON() in ocelot_stats.c
Since it is hopefully now clear that, since "last" and "layout[i].reg"
are enum types and not addresses, the existing WARN_ON() is ineffective
in checking that the _addresses_ are sorted in the proper order.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 12 Apr 2023 12:47:36 +0000 (15:47 +0300)]
net: mscc: ocelot: strengthen type of "int i" in ocelot_stats.c
The "int i" used to index the struct ocelot_stat_layout array actually
has a specific type: enum ocelot_stat. Use it, so that the WARN()
comment from ocelot_prepare_stats_regions() makes more sense.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 12 Apr 2023 12:47:35 +0000 (15:47 +0300)]
net: mscc: ocelot: strengthen type of "u32 reg" and "u32 base" in ocelot_stats.c
Use the specific enum ocelot_reg to make it clear that the region
registers are encoded and not plain addresses.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 12 Apr 2023 12:47:34 +0000 (15:47 +0300)]
net: dsa: felix: remove confusing/incorrect comment from felix_setup()
That comment was written prior to knowing that what I was actually
seeing was a manifestation of the bug fixed in commit b4024c9e5c57
("felix: Fix initialization of ioremap resources").
There isn't any particular reason now why the hardware initialization is
done in felix_setup(), so just delete that comment to avoid spreading
misinformation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 12 Apr 2023 12:47:33 +0000 (15:47 +0300)]
net: mscc: ocelot: remove blank line at the end of ocelot_stats.c
Commit a3bb8f521fd8 ("net: mscc: ocelot: remove unnecessary exposure of
stats structures") made an unnecessary change which was to add a new
line at the end of ocelot_stats.c. Remove it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 12 Apr 2023 12:47:32 +0000 (15:47 +0300)]
net: mscc: ocelot: debugging print for statistics regions
To make it easier to debug future issues with statistics counters not
getting aggregated properly into regions, like what happened in commit 6acc72a43eac ("net: mscc: ocelot: fix stats region batching"), add some
dev_dbg() prints which show the regions that were dynamically
determined.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 12 Apr 2023 12:47:31 +0000 (15:47 +0300)]
net: mscc: ocelot: refactor enum ocelot_reg decoding to helper
ocelot_io.c duplicates the decoding of an enum ocelot_reg (which holds
an enum ocelot_target in the upper bits and an index into a regmap array
in the lower bits) 4 times.
We'd like to reuse that logic once more, from ocelot.c. In order to do
that, let's consolidate the existing 4 instances into a header
accessible both by ocelot.c as well as by ocelot_io.c.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 12 Apr 2023 12:47:30 +0000 (15:47 +0300)]
net: mscc: ocelot: strengthen type of "u32 reg" in I/O accessors
The "u32 reg" argument that is passed to these functions is not a plain
address, but rather a driver-specific encoding of another enum
ocelot_target target in the upper bits, and an index into the
u32 ocelot->map[target][] array in the lower bits. That encoded value
takes the type "enum ocelot_reg" and is what is passed to these I/O
functions, so let's actually use that to prevent type confusion.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).
The main changes are:
1) Rework BPF verifier log behavior and implement it as a rotating log
by default with the option to retain old-style fixed log behavior,
from Andrii Nakryiko.
2) Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params, from Christian Ehrig.
3) Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton,
from Alexei Starovoitov.
4) Optimize hashmap lookups when key size is multiple of 4,
from Anton Protopopov.
5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps, from David Vernet.
6) Add support for stashing local BPF kptr into a map value via
bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
for new cgroups, from Dave Marchevsky.
7) Fix BTF handling of is_int_ptr to skip modifiers to work around
tracing issues where a program cannot be attached, from Feng Zhou.
8) Migrate a big portion of test_verifier unit tests over to
test_progs -a verifier_* via inline asm to ease {read,debug}ability,
from Eduard Zingerman.
9) Several updates to the instruction-set.rst documentation
which is subject to future IETF standardization
(https://lwn.net/Articles/926882/), from Dave Thaler.
10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
known bits information propagation, from Daniel Borkmann.
11) Add skb bitfield compaction work related to BPF with the overall goal
to make more of the sk_buff bits optional, from Jakub Kicinski.
12) BPF selftest cleanups for build id extraction which stand on its own
from the upcoming integration work of build id into struct file object,
from Jiri Olsa.
13) Add fixes and optimizations for xsk descriptor validation and several
selftest improvements for xsk sockets, from Kal Conley.
14) Add BPF links for struct_ops and enable switching implementations
of BPF TCP cong-ctls under a given name by replacing backing
struct_ops map, from Kui-Feng Lee.
15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
offset stack read as earlier Spectre checks cover this,
from Luis Gerhorst.
16) Fix issues in copy_from_user_nofault() for BPF and other tracers
to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
and Alexei Starovoitov.
17) Add --json-summary option to test_progs in order for CI tooling to
ease parsing of test results, from Manu Bretelle.
18) Batch of improvements and refactoring to prep for upcoming
bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
from Martin KaFai Lau.
19) Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations,
from Quentin Monnet.
20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
the module name from BTF of the target and searching kallsyms of
the correct module, from Viktor Malik.
21) Improve BPF verifier handling of '<const> <cond> <non_const>'
to better detect whether in particular jmp32 branches are taken,
from Yonghong Song.
22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
A built-in cc or one from a kernel module is already able to write
to app_limited, from Yixin Shen.
Conflicts:
Documentation/bpf/bpf_devel_QA.rst b7abcd9c656b ("bpf, doc: Link to submitting-patches.rst for general patch submission info") 0f10f647f455 ("bpf, docs: Use internal linking for link to netdev subsystem doc")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/
include/net/ip_tunnels.h bc9d003dc48c3 ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts") ac931d4cdec3d ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices")
https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/
net/bpf/test_run.c e5995bc7e2ba ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption") 294635a8165a ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/
====================
Merge tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, and bluetooth.
Not all that quiet given spring celebrations, but "current" fixes are
thinning out, which is encouraging. One outstanding regression in the
mlx5 driver when using old FW, not blocking but we're pushing for a
fix.
Current release - new code bugs:
- eth: enetc: workaround for unresponsive pMAC after receiving
express traffic
Previous releases - regressions:
- rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the
pid/seq fields 0 for backward compatibility
Previous releases - always broken:
- sctp: fix a potential overflow in sctp_ifwdtsn_skip
- mptcp:
- use mptcp_schedule_work instead of open-coding it and make the
worker check stricter, to avoid scheduling work on closed
sockets
- fix NULL pointer dereference on fastopen early fallback
- skbuff: fix memory corruption due to a race between skb coalescing
and releasing clones confusing page_pool reference counting
- bonding: fix neighbor solicitation validation on backup slaves
- bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp
- bpf: arm64: fixed a BTI error on returning to patched function
- openvswitch: fix race on port output leading to inf loop
- sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
returning a different errno than expected
- phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove
- Bluetooth: fix printing errors if LE Connection times out
- Bluetooth: assorted UaF, deadlock and data race fixes
- adjust the XDP Rx flow hash API to also include the protocol layers
over which the hash was computed"
* tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
xdp: rss hash types representation
selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
skbuff: Fix a race between coalescing and releasing SKBs
net: macb: fix a memory corruption in extended buffer descriptor mode
selftests: add the missing CONFIG_IP_SCTP in net config
udp6: fix potential access to stale information
selftests: openvswitch: adjust datapath NL message declaration
selftests: mptcp: userspace pm: uniform verify events
mptcp: fix NULL pointer dereference on fastopen early fallback
mptcp: stricter state check in mptcp_worker
mptcp: use mptcp_schedule_work instead of open-coding it
net: enetc: workaround for unresponsive pMAC after receiving express traffic
sctp: fix a potential overflow in sctp_ifwdtsn_skip
net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
rtnetlink: Restore RTM_NEW/DELLINK notification behavior
net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
...
Merge tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix interaction between fw_devlink and DT overlays causing devices to
not be probed
- Fix the compatible string for loongson,cpu-interrupt-controller
* tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
treewide: Fix probing of devices in DT overlays
dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible
projects / mirror_ubuntu-kernels.git / log