Peter Maydell [Thu, 23 May 2019 15:05:43 +0000 (16:05 +0100)]
hw/core/bus.c: Only the main system bus can have no parent
In commit 80376c3fc2c38fdd453 in 2010 we added a workaround for
some qbus buses not being connected to qdev devices -- if the
bus has no parent object then we register a reset function which
resets the bus on system reset (and unregister it when the
bus is unparented).
Nearly a decade later, we have now no buses in the tree which
are created with non-NULL parents, so we can remove the
workaround and instead just assert that if the bus has a NULL
parent then it is the main system bus.
(The absence of other parentless buses was confirmed by
code inspection of all the callsites of qbus_create() and
qbus_create_inplace() and cross-checked by 'make check'.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190523150543.22676-1-peter.maydell@linaro.org
Peter Maydell [Fri, 24 May 2019 12:48:29 +0000 (13:48 +0100)]
hw/arm/smmuv3: Fix decoding of ID register range
The SMMUv3 ID registers cover an area 0x30 bytes in size
(12 registers, 4 bytes each). We were incorrectly decoding
only the first 0x20 bytes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20190524124829.2589-1-peter.maydell@linaro.org
Peter Maydell [Fri, 10 May 2019 11:03:57 +0000 (12:03 +0100)]
target/arm: Implement NSACR gating of floating point
The NSACR register allows secure code to configure the FPU
to be inaccessible to non-secure code. If the NSACR.CP10
bit is set then:
* NS accesses to the FPU trap as UNDEF (ie to NS EL1 or EL2)
* CPACR.{CP10,CP11} behave as if RAZ/WI
* HCPTR.{TCP11,TCP10} behave as if RAO/WI
Note that we do not implement the NSACR.NSASEDIS bit which
gates only access to Advanced SIMD, in the same way that
we don't implement the equivalent CPACR.ASEDIS and HCPTR.TASE.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190510110357.18825-1-peter.maydell@linaro.org
This replaces 3 target-specific implementations for BIT, BIF, and BSL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190518191934.21887-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 13 Jun 2019 10:58:00 +0000 (11:58 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-06-12' into staging
QAPI patches for 2019-06-12
# gpg: Signature made Wed 12 Jun 2019 17:44:50 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2019-06-12:
qapi: Simplify how QAPIDoc implements its state machine
file-posix: Add dynamic-auto-read-only QAPI feature
qapi: Allow documentation for features
qapi: Disentangle QAPIDoc code
tests/qapi-schema: Error case tests for features in structs
tests/qapi-schema: Test for good feature lists in structs
qapi: Add feature flags to struct types
block/gluster: update .help of BLOCK_OPT_PREALLOC option
block/file-posix: update .help of BLOCK_OPT_PREALLOC option
qapi/block-core: update documentation of preallocation parameter
qdev: Delete unused LostTickPolicy "merge"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Chen Zhang [Tue, 4 Jun 2019 09:36:48 +0000 (17:36 +0800)]
ui/cocoa: Fix mouse grabbing in fullscreen mode for relative input device
In fullscreen mode, the window property of cocoaView may not be the key
window, and the current implementation would not re-grab cursor by left click
in fullscreen mode after ungrabbed in fullscreen mode with hot-key ctrl-opt-g.
This patch used value of isFullscreen as a short-cirtuit condition for
relative input device grabbing.
Signed-off-by: Chen Zhang <tgfbeta@me.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 2D2F1191-E82F-4B54-A6E7-73FFB953DE93@me.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Chen Zhang [Tue, 4 Jun 2019 09:36:00 +0000 (17:36 +0800)]
ui/cocoa: Fix absolute input device grabbing issue on Mojave
On Mojave, absolute input device, i.e. tablet, had trouble re-grabbing
the cursor in re-entry into the virtual screen area. In some cases,
the `window` property of NSEvent object was nil after cursor exiting from
window, hinting that the `-locationInWindow` method would return value in
screen coordinates. The current implementation used raw locations from
NSEvent without considering whether the value was for the window coordinates
or the macOS screen coordinates, nor the zooming factor for Zoom-to-Fit in
fullscreen mode.
In fullscreen mode, the fullscreen cocoa window might not be the key
window, therefore the location of event in virtual coordinates should
suffice.
This patches fixed boundary check methods for cursor in normal
and fullscreen with/without Zoom-to-Fit in Mojave.
Note: CGRect, -convertRectToScreen: and -convertRectFromScreen: were
used in coordinates conversion for compatibility reason.
Signed-off-by: Chen Zhang <tgfbeta@me.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: FA3FBC4F-5379-4118-B997-58FE05CC58F9@me.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 13 Jun 2019 09:00:18 +0000 (10:00 +0100)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-gdbstub-cputlb-120619-3' into staging
Various fixes and updates:
- editor config tweak for shell scripts
- iotest updates (still not default for make check)
- various docker updates
- gcc/ubsan updates for travis
- some clean-ups for tests/vm (no serial autoinstall)
- semihosting fix for Coverity
- fixes for cputlb in 64-on-32 cases
- gdbstub re-factor + maintainership update
# gpg: Signature made Wed 12 Jun 2019 17:55:04 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-gdbstub-cputlb-120619-3: (40 commits)
gdbstub: Implement qemu physical memory mode
gdbstub: Clear unused variables in gdb_handle_packet
gdbstub: Implement target halted (? pkt) with new infra
gdbstub: Implement generic set/query (Q/q pkt) with new infra
gdbstub: Implement v commands with new infra
gdbstub: Implement step (s pkt) with new infra
gdbstub: Implement file io (F pkt) with new infra
gdbstub: Implement read all registers (g pkt) with new infra
gdbstub: Implement write all registers (G pkt) with new infra
gdbstub: Implement read memory (m pkt) with new infra
gdbstub: Implement write memory (M pkt) with new infra
gdbstub: Implement get register (p pkt) with new infra
gdbstub: Implement set register (P pkt) with new infra
gdbstub: Implement breakpoint commands (Z/z pkt) with new infra
gdbstub: Implement set_thread (H pkt) with new infra
gdbstub: Implement continue with signal (C pkt) with new infra
gdbstub: Implement continue (c pkt) with new infra
gdbstub: Implement thread_alive (T pkt) with new infra
gdbstub: Implement deatch (D pkt) with new infra
gdbstub: Add infrastructure to parse cmd packets
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Fri, 7 Jun 2019 08:34:29 +0000 (10:34 +0200)]
edid: add xmax + ymax properties
Add new properties to allow setting the maximum display resolution.
Resolutions larger than that will not be included in the mode list.
In linux guests xrandr can be used to list modes.
Note: The existing xres and yres properties set the preferred display
resolution, i.e. the mode should be first in the mode list and guests
should use it by default.
Jon Doron [Wed, 29 May 2019 06:41:48 +0000 (09:41 +0300)]
gdbstub: Implement qemu physical memory mode
Add a new query/set which changes the memory GDB sees to physical memory
only.
gdb> maint packet qqemu.PhyMemMode
will reply the current phy_mem_mode state (1 for enabled, 0 for disabled)
gdb> maint packet Qqemu.PhyMemMode:1
Will make GDB read/write only to physical memory, set to 0 to disable
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20190529064148.19856-21-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:47 +0000 (09:41 +0300)]
gdbstub: Clear unused variables in gdb_handle_packet
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-20-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:45 +0000 (09:41 +0300)]
gdbstub: Implement generic set/query (Q/q pkt) with new infra
The generic set/query packets contains implementation for varioius
sub-commands which are required for GDB and also additional commands
which are QEMU specific.
To see which QEMU specific commands are available use the command
gdb> maintenance packet qqemu.Supported
Currently the only implemented QEMU specific command is the command
that sets the single step behavior.
gdb> maintenance packet qqemu.sstepbits
Will display the MASK bits used to control the single stepping.
gdb> maintenance packet qqemu.sstep
Will display the current value of the mask used when single stepping.
gdb> maintenance packet Qqemu.sstep:HEX_VALUE
Will change the single step mask.
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20190529064148.19856-18-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:43 +0000 (09:41 +0300)]
gdbstub: Implement step (s pkt) with new infra
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-16-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:41 +0000 (09:41 +0300)]
gdbstub: Implement read all registers (g pkt) with new infra
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-14-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:40 +0000 (09:41 +0300)]
gdbstub: Implement write all registers (G pkt) with new infra
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-13-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:39 +0000 (09:41 +0300)]
gdbstub: Implement read memory (m pkt) with new infra
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-12-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:38 +0000 (09:41 +0300)]
gdbstub: Implement write memory (M pkt) with new infra
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-11-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:34 +0000 (09:41 +0300)]
gdbstub: Implement set_thread (H pkt) with new infra
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-7-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:33 +0000 (09:41 +0300)]
gdbstub: Implement continue with signal (C pkt) with new infra
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-6-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:32 +0000 (09:41 +0300)]
gdbstub: Implement continue (c pkt) with new infra
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-5-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:31 +0000 (09:41 +0300)]
gdbstub: Implement thread_alive (T pkt) with new infra
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-4-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:30 +0000 (09:41 +0300)]
gdbstub: Implement deatch (D pkt) with new infra
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20190529064148.19856-3-arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Jon Doron [Wed, 29 May 2019 06:41:29 +0000 (09:41 +0300)]
gdbstub: Add infrastructure to parse cmd packets
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-2-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Thu, 6 Jun 2019 15:38:19 +0000 (16:38 +0100)]
cputlb: cast size_t to target_ulong before using for address masks
While size_t is defined to happily access the biggest host object this
isn't the case when generating masks for 64 bit guests on 32 bit
hosts. Otherwise we end up truncating the address when we fall back to
our unaligned helper.
Fixes: https://bugs.launchpad.net/qemu/+bug/1831545 Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Thu, 6 Jun 2019 08:27:53 +0000 (09:27 +0100)]
MAINTAINERS: put myself forward for gdbstub
As I've been reviewing a lot of this recently and I'm going to put
together a pull request I'd better keep an eye on it. Philippe has
also volunteered to be a reviewer.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Mon, 3 Jun 2019 15:14:24 +0000 (16:14 +0100)]
tests/tcg: better detect truncated reads
If we've truncated a wider read we can detect the condition earlier by
looking at the number of zeros we've read. So we don't trip up on
cases where we have written zeros to the start of the buffer we also
ensure we only start each offset read from the right address.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Mon, 3 Jun 2019 14:56:32 +0000 (15:56 +0100)]
cputlb: use uint64_t for interim values for unaligned load
When running on 32 bit TCG backends a wide unaligned load ends up
truncating data before returning to the guest. We specifically have
the return type as uint64_t to avoid any premature truncation so we
should use the same for the interim types.
Fixes: https://bugs.launchpad.net/qemu/+bug/1830872 Fixes: eed5664238e Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com>
Alex Bennée [Thu, 30 May 2019 14:35:14 +0000 (15:35 +0100)]
semihosting: split console_out into string and char versions
This is ostensibly to avoid the weirdness of len looking like it might
come from a guest and sometimes being used. While we are at it fix up
the error checking for the arm-linux-user implementation of the API
which got flagged up by Coverity (CID 1401700).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Gerd Hoffmann [Mon, 20 May 2019 12:47:04 +0000 (14:47 +0200)]
tests/vm: python3 fixes
Add proper unicode handling when processing strings.
Also need to explicitly say we want int not float.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190520124716.30472-3-kraxel@redhat.com>
[AJB: fix conflicts with tests/vm: Port basevm to Python 3] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Gerd Hoffmann [Mon, 20 May 2019 12:47:03 +0000 (14:47 +0200)]
scripts: use git archive in archive-source
Use git archive to create tarballs of qemu and submodules instead of
cloning the repository and the submodules. This is a order of magnitude
faster because it doesn't fetch the submodules from the internet each
time the script runs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190520124716.30472-2-kraxel@redhat.com>
[AJB: fixed up tabs] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Added description of variables missing on vm-test help.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190329210804.22121-6-wainersm@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
`make vm-build-centos` run docker-based tests on CentOS. The
created containers should have network otherwise some tests
fail. Also fixed the BUILD_SCRIPT template to correctly
evaluate "V=1" for verbose output.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190329210804.22121-5-wainersm@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixed tests/vm/basevm.py to run with Python 3:
- hashlib.sha1() requires an binary encoded object.
- uses floor division ("//") (PEP 238).
- decode bytes to unicode when needed.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190329210804.22121-3-wainersm@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Changed the vm-test makefile to execute python scripts
with the interpreter configured on build. This allows to
run vm-test targets properly in Linux distros with Python 3
only support.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190329210804.22121-2-wainersm@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Tue, 28 May 2019 18:21:19 +0000 (19:21 +0100)]
.travis.yml: add clang ubsan job
We document this on our wiki and we might as well catch it in our CI
rather than waiting for it to be picked up on merge:
https://wiki.qemu.org/Testing#clang_UBSan
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Thu, 30 May 2019 09:52:53 +0000 (10:52 +0100)]
tests/docker: Update the Fedora cross compile images to 30
While at it remove the bogus :latest tag for cris cross compiler. It
tends to break caching and cause confusion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Wed, 29 May 2019 16:16:32 +0000 (17:16 +0100)]
qemu-io-cmds: use clock_gettime for benchmarking
The previous use of gettimeofday() ran into undefined behaviour when
we ended up doing a div 0 for a very short operation. This is because
gettimeofday only works at the microsecond level as well as being
prone to discontinuous jumps in system time. Using clock_gettime with
CLOCK_MONOTONIC gives greater precision and alleviates some of the
potential problems with time jumping around.
We could use CLOCK_MONOTONIC_RAW to avoid being tripped up by NTP and
adjtime but that is Linux specific so I decided it would do for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
qapi: Simplify how QAPIDoc implements its state machine
QAPIDoc uses a state machine to for processing of documentation lines.
Its state is encoded as an enum QAPIDoc._state (well, as enum-like
class actually, thanks to our infatuation with Python 2).
All we ever do with the state is calling the state's function to
process a line of documentation. The enum values effectively serve as
handles for the functions.
Eliminate the rather wordy indirection: store the function to call in
QAPIDoc._append_line. Update and improve comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190606153803.5278-8-armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
[Commit message typo fixed]
In commit 23dece19da4 ('file-posix: Make auto-read-only dynamic') ,
auto-read-only=on changed its behaviour in file-posix for the 4.0
release. This change cannot be detected through the usual mechanisms
like schema introspection. Add a new feature flag to the schema to
allow libvirt to detect the presence of the new behaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-7-armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Comment tweaked on Eric Blake's advice] Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 6 Jun 2019 15:38:01 +0000 (17:38 +0200)]
qapi: Allow documentation for features
Features will be documented in a new part introduced by a "Features:"
line, after arguments and before named sections.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-6-armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 6 Jun 2019 15:38:00 +0000 (17:38 +0200)]
qapi: Disentangle QAPIDoc code
Documentation comments follow a certain structure: First, we have a text
with a general description (called QAPIDoc.body). After this,
descriptions of the arguments follow. Finally, we have a part that
contains various named sections.
The code doesn't show this structure, but just checks various attributes
that indicate indirectly which part is being processed, so it happens to
do the right set of things in the right phase. This is hard to follow,
and adding support for documentation of features would be even harder.
This patch restructures the code so that the three parts are clearly
separated. The code becomes a bit longer, but easier to follow. The
resulting output remains unchanged.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-5-armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 6 Jun 2019 15:37:59 +0000 (17:37 +0200)]
tests/qapi-schema: Error case tests for features in structs
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-4-armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 6 Jun 2019 15:37:58 +0000 (17:37 +0200)]
tests/qapi-schema: Test for good feature lists in structs
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-3-armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 6 Jun 2019 15:37:57 +0000 (17:37 +0200)]
qapi: Add feature flags to struct types
Sometimes, the behaviour of QEMU changes without a change in the QMP
syntax (usually by allowing values or operations that previously
resulted in an error). QMP clients may still need to know whether
they can rely on the changed behavior.
Let's add feature flags to the QAPI schema language, so that we can make
such changes visible with schema introspection.
An example for a schema definition using feature flags looks like this:
This patch implements feature flags only for struct types. We'll
implement them more widely as needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-2-armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
block/gluster: update .help of BLOCK_OPT_PREALLOC option
Add missing 'falloc' among the allowed values of 'preallocation'
option; show it and 'full' only when they are supported.
('falloc' is supported if defined CONFIG_GLUSTERFS_FALLOCATE,
'full' is supported if defined CONFIG_GLUSTERFS_ZEROFILL)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190524075848.23781-4-sgarzare@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
qapi/block-core: update documentation of preallocation parameter
Add default and available values in the documentation block of
each block device or protocol that supports the 'preallocation'
parameter during the image creation.
Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190524075848.23781-2-sgarzare@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 4e4fa398db6 "qdev: Introduce lost tick policy property"
(v1.1.0) created PropertyType PROP_TYPE_LOSTTICKPOLICY with values
"discard", "delay", "merge", and "slew". Value "merge" has never been
used. Delete it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190401150140.29151-1-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Peter Maydell [Wed, 12 Jun 2019 13:43:47 +0000 (14:43 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190612' into staging
ppc patch queue 2019-06-12
Next pull request against qemu-4.1. The big thing here is adding
support for hot plug of P2P bridges, and PCI devices under P2P bridges
on the "pseries" machine (which doesn't use SHPC). Other than that
there's just a handful of fixes and small enhancements.
* remotes/dgibson/tags/ppc-for-4.1-20190612:
ppc/xive: Make XIVE generate the proper interrupt types
ppc/pnv: activate the "dumpdtb" option on the powernv machine
target/ppc: Use tcg_gen_gvec_bitsel
spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges
spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge
spapr: Don't use bus number for building DRC ids
spapr: Clean up DRC index construction
spapr: Clean up spapr_drc_populate_dt()
spapr: Clean up dt creation for PCI buses
spapr: Clean up device tree construction for PCI devices
spapr: Clean up device node name generation for PCI devices
target/ppc: Fix lxvw4x, lxvh8x and lxvb16x
spapr_pci: Improve error message
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 12 Jun 2019 12:50:01 +0000 (13:50 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging
Miscellaneous patches for 2019-06-11
# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-misc-2019-06-11-v3:
MAINTAINERS: Polish headline decorations
MAINTAINERS: Improve section headlines
MAINTAINERS: Remove duplicate entries of qemu-devel@nongnu.org
Clean up a header guard symbols (again)
Supply missing header guards
Clean up a few header guard symbols
scripts/clean-header-guards: Fix handling of trailing comments
Normalize position of header guard
Include qemu-common.h exactly where needed
Include qemu/module.h where needed, drop it from qemu-common.h
qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190606172408.18399-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When scripts/get_maintainer.pl reports something like
John Doe <jdoe@example.org> (maintainer:Overall)
the user is left to wonder *which* of our three "Overall" sections
applies: the one under "Guest CPU cores (TCG)", or the one under
"Guest CPU Cores (KVM)", or the one under "Usermode emulation".
Rename sections under
* "Guest CPU cores (TCG)" from "FOO" to "FOO TCG CPUs"
* "Guest CPU Cores (KVM)" from "FOO" to "FOO KVM CPUs"
* "Guest CPU Cores (Xen)" from "FOO" to "FOO Xen CPUs"
* "Architecture support" from "FOO" to "FOO general architecture
support"
* "Usermode Emulation" from "Overall" to "Overall usermode emulation"
* "Tiny Code Generator (TCG)" from "FOO target" to "FOO TCG target",
and from "Common code" to "Common TCG code"
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190606172408.18399-3-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
MAINTAINERS: Remove duplicate entries of qemu-devel@nongnu.org
The list is always selected by the 'All patches CC here' section.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Conflicts resolved by redoing the patch] Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit d52c454aad "contrib: add vhost-user-gpu" and "c68082c43a
virtio-gpu: split virtio-gpu-pci & virtio-vga" created headers with
unusual header guard symbols. Clean them up
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190607141321.9726-1-armbru@redhat.com>
Commit 58ea30f5145 "Clean up header guards that don't match their file
name" messed up contrib/elf2dmp/qemu_elf.h and
tests/migration/migration-test.h.
It missed target/cris/opcode-cris.h and
tests/uefi-test-tools/UefiTestToolsPkg/Include/Guid/BiosTablesTest.h
due to the scripts/clean-header-guards.pl bug fixed in the previous
commit.
Commit a8b991b52dc "Clean up ill-advised or unusual header guards"
missed include/hw/xen/io/ring.h for the same reason.
Commit 3979fca4b69 "disas: Rename include/disas/bfd.h back to
include/disas/dis-asm.h" neglected to update the guard symbol for the
rename.
Commit a331c6d7741 "semihosting: implement a semihosting console"
created include/hw/semihosting/console.h with an ill-advised guard
symbol.
Clean them up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
A few of our headers have some #include before the guard.
target/tilegx/spr_def_64.h has #ifndef __DOXYGEN__ outside the guard.
A few more have the #define elsewhere.
Change them to match the common idiom. For spr_def_64.h, that means
dropping #ifndef __DOXYGEN__. While there, rename guard symbols to
make scripts/clean-header-guards.pl happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-2-armbru@redhat.com>
[Rebased with conflicts resolved automatically]
Peter Maydell [Wed, 12 Jun 2019 10:49:08 +0000 (11:49 +0100)]
Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging
Python queue, 2019-06-11
* New boot_linux_console test cases (Philippe Mathieu-Daudé)
* Make check-acceptance Travis job more verbose (Eduardo Habkost)
# gpg: Signature made Tue 11 Jun 2019 18:13:35 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/python-next-pull-request:
travis: Make check-acceptance job more verbose
BootLinuxConsoleTest: Run kerneltests BusyBox on Malta
BootLinuxConsoleTest: Test nanoMIPS kernels on the I7200 CPU
BootLinuxConsoleTest: Test the SmartFusion2 board
BootLinuxConsoleTest: Do not log empty lines
tests/boot_linux_console: Let extract_from_deb handle various compressions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ppc/xive: Make XIVE generate the proper interrupt types
It should be generic Hypervisor Virtualization interrupts for HV
directed rings and traditional External Interrupts for the OS directed
ring.
Don't generate anything for the user ring as it isn't actually
supported.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190606174409.12502-1-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc/pnv: activate the "dumpdtb" option on the powernv machine
This is a good way to debug the DT creation for current PowerNV
machines and new ones to come.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190606174732.13051-1-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace the target-specific implementation of XXSEL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190603164927.8336-1-richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Fri, 5 Apr 2019 05:34:19 +0000 (16:34 +1100)]
spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges
The pseries machine type already allows PCI hotplug and unplug via the
PAPR mechanism, but only on the root bus of each PHB. This patch extends
this to allow PCI to PCI bridges to be hotplugged, and devices to be
hotplugged or unplugged under P2P bridges.
For now we disallow hot unplugging P2P bridges. I tried doing that, but
haven't managed to get it working, I think due to some guest side problems
that need further investigation.
To do this we dynamically construct DRCs when bridges are hot (or cold)
added, which can in turn be used to hotplug devices under the bridge.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com>
David Gibson [Fri, 15 Feb 2019 05:50:40 +0000 (16:50 +1100)]
spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge
A P2P bridge will attempt to handle the hotplug with SHPC, which doesn't
work in the PAPR environment. Instead we want to direct all PCI hotplug
actions to the PAPR specific host bridge which will use the PAPR hotplug
mechanism.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com>
David Gibson [Wed, 10 Apr 2019 01:49:28 +0000 (11:49 +1000)]
spapr: Don't use bus number for building DRC ids
DRC ids are more or less arbitrary, as long as they're consistent. For
PCI, we notionally build them from the phb's index along with PCI bus
number, slot and function number.
Using bus number is broken, however, because it can change if the guest
re-enumerates the PCI topology for whatever reason (e.g. due to hotplug
of a bridge, which we don't support yet but want to).
Fortunately, there's an alternative. Bridges are required to have a unique
non-zero "chassis number" that we can use instead. Adjust the code to
use that instead.
This looks like it would introduce a guest visible breaking change, but
in fact it does not because we don't yet ever use non-zero bus numbers.
Both chassis and bus number are always 0 for the root bus, so there's no
change for the existing cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com>
David Gibson [Fri, 5 Apr 2019 04:51:00 +0000 (15:51 +1100)]
spapr: Clean up DRC index construction
spapr_pci.c currently has several confusingly similarly named functions for
various conversions between representations of DRCs. Make things clearer
by renaming things in a more consistent XXX_from_YYY() manner and remove
some called-only-once variants in favour of open coding.
While we're at it, move this code together in the file to avoid some extra
forward references, and split out construction and removal of DRCs for the
host bridge into helper functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com>
David Gibson [Fri, 5 Apr 2019 02:31:48 +0000 (13:31 +1100)]
spapr: Clean up dt creation for PCI buses
Device nodes for PCI bridges (both host and P2P) describe both the bridge
device itself and the bus hanging off it, handling of this is a bit of a
mess.
spapr_dt_pci_device() has a few things it only adds for non-bridges, but
always adds #address-cells and #size-cells which should only appear for
bridges. But the walking down the subordinate PCI bus is done in one of
its callers spapr_populate_pci_devices_dt(). The PHB dt creation in
spapr_populate_pci_dt() open codes some similar logic to the bridge case.
This patch consolidates things in a bunch of ways:
* Bus specific dt info is now created in spapr_dt_pci_bus() used for both
P2P bridges and the host bridge. This includes walking subordinate
devices
* spapr_dt_pci_device() now calls spapr_dt_pci_bus() when called on a
P2P bridge
* We do detection of bridges with the is_bridge field of the device class,
rather than checking PCI config space directly, for consistency with
qemu's core PCI code.
* Several things are renamed for brevity and clarity
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com>
David Gibson [Fri, 22 Mar 2019 05:17:14 +0000 (16:17 +1100)]
spapr: Clean up device tree construction for PCI devices
spapr_create_pci_child_dt() is a trivial wrapper around
spapr_populate_pci_child_dt(), but is the latter's only caller. So fold
them together into spapr_dt_pci_device(), which closer matches our modern
naming convention.
While there, make a number of cleanups to the function itself. This is
mostly using more temporary locals to avoid awkwardly long lines, and in
some cases avoiding double reads of PCI config space variables.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Michael S. Tsirkin <mst@redhat.com>
David Gibson [Fri, 22 Mar 2019 05:13:09 +0000 (16:13 +1100)]
spapr: Clean up device node name generation for PCI devices
spapr_populate_pci_child_dt() adds a 'name' property to the device tree
node for PCI devices. This is never necessary for a flattened device tree,
it is implicit in the name added when the node is constructed. In fact
anything we do add to a 'name' property will be overwritten with something
derived from the structural name in the guest firmware (but in fact it is
exactly the same bytes).
So, remove that. In addition, pci_get_node_name() is very simple, so fold
it into its (also simple) sole caller spapr_create_pci_child_dt().
While we're there rename pci_find_device_name() to the shorter and more
accurate dt_name_from_class().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Michael S. Tsirkin <mst@redhat.com>
Anton Blanchard [Fri, 24 May 2019 06:53:45 +0000 (07:53 +0100)]
target/ppc: Fix lxvw4x, lxvh8x and lxvb16x
During the conversion these instructions were incorrectly treated as
stores. We need to use set_cpu_vsr* and not get_cpu_vsr*.
Fixes: 8b3b2d75c7c0 ("introduce get_cpu_vsr{l,h}() and set_cpu_vsr{l,h}() helpers for VSR register access") Signed-off-by: Anton Blanchard <anton@ozlabs.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190524065345.25591-1-mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Wed, 29 May 2019 17:15:09 +0000 (19:15 +0200)]
spapr_pci: Improve error message
Every PHB must have a unique index. This is checked at realize but when
a duplicate index is detected, an error message mentioning BUIDs is
printed. This doesn't help much, especially since BUID is an internal
concept that is no longer exposed to the user.
Fix the message to mention the index property instead of BUID. As a bonus
print a list of indexes already in use.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155915010892.2061314.10485622810149098411.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
BootLinuxConsoleTest: Run kerneltests BusyBox on Malta
This tests boots a Linux kernel on a Malta machine up to a
busybox shell on the serial console. Few commands are executed
before halting the machine (via reboot).
We use the initrd cpio image from the kerneltests project:
https://kerneltests.org/
If MIPS is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t arch:mips tests/acceptance/boot_linux_console.py
[...]
console: Boot successful.
[...]
console: / # uname -a
console: Linux buildroot 4.5.0-2-4kc-malta #1 Debian 4.5.5-1 (2016-05-29) mips GNU/Linux
console: / # reboot
console: / # reboot: Restarting system
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190520231910.12184-4-f4bug@amsat.org> Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
tests/boot_linux_console: Let extract_from_deb handle various compressions
Debian binary package format supports various compressions.
Per man deb(5):
NAME
deb - Debian binary package format
FORMAT
...
The third, last required member is named data.tar. It contains the
filesystem as a tar archive, either not compressed (supported since
dpkg 1.10.24), or compressed with gzip (with .gz extension),
xz (with .xz extension, supported since dpkg 1.15.6),
bzip2 (with .bz2 extension, supported since dpkg 1.10.24) or
lzma (with .lzma extension, supported since dpkg 1.13.25).
List the archive files to have the 3rd name with the correct extension.
The function avocado.utils.archive.extract() will handle the different
compression format for us.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190312234541.2887-2-philmd@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Tue, 11 Jun 2019 15:02:07 +0000 (16:02 +0100)]
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue, 2019-06-11
* "unavailable-features" QOM property (Eduardo Habkost)
* Save EFER for 32-bit targets (Pavel Dovgalyuk)
# gpg: Signature made Tue 11 Jun 2019 14:41:45 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386: Save EFER for 32-bit targets
i386: "unavailable-features" QOM property
i386: x86_cpu_list_feature_names() function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
projects / mirror_qemu.git / log