Xin Long [Wed, 28 Sep 2016 18:37:28 +0000 (02:37 +0800)]
sctp: change to check peer prsctp_capable when using prsctp polices
Now before using prsctp polices, sctp uses asoc->prsctp_enable to
check if prsctp is enabled. However asoc->prsctp_enable is set only
means local host support prsctp, sctp should not abandon packet if
peer host doesn't enable prsctp.
So this patch is to use asoc->peer.prsctp_capable to check if prsctp
is enabled on both side, instead of asoc->prsctp_enable, as asoc's
peer.prsctp_capable is set only when local and peer both enable prsctp.
Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 28 Sep 2016 18:37:27 +0000 (02:37 +0800)]
sctp: remove prsctp_param from sctp_chunk
Now sctp uses chunk->prsctp_param to save the prsctp param for all the
prsctp polices, we didn't need to introduce prsctp_param to sctp_chunk.
We can just use chunk->sinfo.sinfo_timetolive for RTX and BUF polices,
and reuse msg->expires_at for TTL policy, as the prsctp polices and old
expires policy are mutual exclusive.
This patch is to remove prsctp_param from sctp_chunk, and reuse msg's
expires_at for TTL and chunk's sinfo.sinfo_timetolive for RTX and BUF
polices.
Note that sctp can't use chunk's sinfo.sinfo_timetolive for TTL policy,
as it needs a u64 variables to save the expires_at time.
This one also fixes the "netperf-Throughput_Mbps -37.2% regression"
issue.
Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 28 Sep 2016 18:37:26 +0000 (02:37 +0800)]
sctp: move sent_count to the memory hole in sctp_chunk
Now pahole sctp_chunk, it has 2 memory holes:
struct sctp_chunk {
struct list_head list;
atomic_t refcnt;
/* XXX 4 bytes hole, try to pack */
...
long unsigned int prsctp_param;
int sent_count;
/* XXX 4 bytes hole, try to pack */
This patch is to move up sent_count to fill the 1st one and eliminate
the 2nd one.
It's not just another struct compaction, it also fixes the "netperf-
Throughput_Mbps -37.2% regression" issue when overloading the CPU.
Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Milton Miller [Thu, 29 Sep 2016 16:24:08 +0000 (13:24 -0300)]
tg3: Avoid NULL pointer dereference in tg3_io_error_detected()
While the driver is probing the adapter, an error may occur before the
netdev structure is allocated and attached to pci_dev. In this case,
not only netdev isn't available, but the tg3 private structure is also
not available as it is just math from the NULL pointer, so dereferences
must be skipped.
The following trace is seen when the error is triggered:
This patch avoids the NULL pointer dereference by moving the access after
the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a
check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan].
Fixes: 0486a063b1ff ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370316b ("net/tg3: Release IRQs on permanent error") Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 27 Sep 2016 13:53:30 +0000 (09:53 -0400)]
Merge branch 'act_ife-fixes'
Yotam Gigi says:
====================
Fix tc-ife bugs
This patch-set contains two bugfixes in the tc-ife action, one fixing some
random behaviour in encode side, and one fixing the decode side packet
parsing logic.
v2->v3
- Fix the encode side instead of the decode side
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On ife encode side, the action stores the different tlvs inside the ife
header, where each tlv length field should refer to the length of the
whole tlv (without additional padding) and not just the data length.
On ife decode side, the action iterates over the tlvs in the ife header
and parses them one by one, where in each iteration the current pointer is
advanced according to the tlv size.
Before, the encoding encoded only the data length inside the tlv, which led
to false parsing of ife the header. In addition, due to the fact that the
loop counter was unsigned, it could lead to infinite parsing loop.
This fix changes the loop counter to be signed and fixes the encoding to
take into account the tlv type and size.
Fixes: 28a10c426e81 ("net sched: fix encoding to use real length") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
On ife encode side, external mac header is copied from the original packet
and may be overridden if the user requests. Before, the mac header copy
was done from memory region that might not be accessible anymore, as
skb_cow_head might free it and copy the packet. This led to random values
in the external mac header once the values were not set by user.
This fix takes the internal mac header from the packet, after the call to
skb_cow_head.
Fixes: ef6980b6becb ("net sched: introduce IFE action") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
VSOCK: Don't dec ack backlog twice for rejected connections
If a pending socket is marked as rejected, we will decrease the
sk_ack_backlog twice. So don't decrement it for rejected sockets
in vsock_pending_work().
Testing of the rejected socket path was done through code
modifications.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Reviewed-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Revert "net: ethernet: bcmgenet: use phydev from struct net_device"
This reverts commit 62469c76007e ("net: ethernet: bcmgenet: use phydev
from struct net_device") because it causes GENETv1/2/3 adapters to
expose the following behavior after an ifconfig down/up sequence:
PING fainelli-linux (10.112.156.244): 56 data bytes
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!)
This was previously fixed by commit 5dbebbb44a6a ("net: bcmgenet:
Software reset EPHY after power on") but the commit we are reverting was
essentially making this previous commit void, here is why.
Without commit 62469c76007e we would have the following scenario after
an ifconfig down then up sequence:
- bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is
initialized *before* we get to initialize the UniMAC, this is
critical to ensure the PHY is in a correct state, priv->phydev is
valid, this code executes fine
- second time from bcmgenet_mii_probe(), through the normal
phy_init_hw() call (which arguably could be optimized out)
Everything is fine in that case. With commit 62469c76007e, we would have
the following scenario to happen after an ifconfig down then up
sequence:
- bcmgenet_close() calls phy_disonnect() which makes dev->phydev become
NULL
- when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from
bcmgenet_power_up() to initialize the internal PHY, the NULL check
becomes true, so we do not reset the PHY, yet we keep going on and
initialize the UniMAC, causing MAC activity to occur
- we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is
too late, the PHY is botched, and causes the above bogus pings/packets
transmission/reception to occur
Reported-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 27 Sep 2016 11:39:38 +0000 (07:39 -0400)]
Merge branch 'fec-align'
Eric Nelson says:
====================
net: fec: updates to align IP header
This patch series is the outcome of investigation into very high
numbers of alignment faults on kernel 4.1.33 from the linux-fslc
tree:
https://github.com/freescale/linux-fslc/tree/4.1-1.0.x-imx
The first two patches remove support for the receive accelerator (RACC) from
the i.MX25 and i.MX27 SoCs which don't support the function.
The third patch enables hardware alignment of the ethernet packet payload
(and especially the IP header) to prevent alignment faults in the IP stack.
Testing on i.MX6UL on the 4.1.33 kernel showed that this patch removed
on the order of 70k alignment faults during a 100MiB transfer using
wget.
Testing on an i.MX6Q (SABRE Lite) board on net-next (4.8.0-rc7) showed
a much more modest improvement from 10's of faults, and it's not clear
why that's the case.
====================
Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Nelson [Sat, 24 Sep 2016 14:42:19 +0000 (07:42 -0700)]
net: fec: align IP header in hardware
The FEC receive accelerator (RACC) supports shifting the data payload of
received packets by 16-bits, which aligns the payload (IP header) on a
4-byte boundary, which is, if not required, at least strongly suggested
by the Linux networking layer.
Without this patch, a huge number of alignment faults will be taken by the
IP stack, as seen in /proc/cpu/alignment:
ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route
Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid
instead of the previous dst_pid which was copied from in_skb's portid.
Since the skb is new the portid is 0 at that point so the packets are sent
to the kernel and we get scheduling while atomic or a deadlock (depending
on where it happens) by trying to acquire rtnl two times.
Also since this is RTM_GETROUTE, it can be triggered by a normal user.
Fixes: 2942e9005056 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_gre: fix flowi6_proto value in ip6gre_xmit_other()
Similar to commit 3be07244b733 ("ip6_gre: fix flowi6_proto value in
xmit path"), set flowi6_proto to IPPROTO_GRE for output route lookup.
Up until now, ip6gre_xmit_other() has set flowi6_proto to a bogus value.
This affected output route lookup for packets sent on an ip6gretap device
in cases where routing was dependent on the value of flowi6_proto.
Since the correct proto is already set in the tunnel flowi6 template via
commit 252f3f5a1189 ("ip6_gre: Set flowi6_proto as IPPROTO_GRE in xmit
path."), simply delete the line setting the incorrect flowi6_proto value.
Suggested-by: Jiri Benc <jbenc@redhat.com> Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 23 Sep 2016 00:54:00 +0000 (17:54 -0700)]
tcp: fix a compile error in DBGUNDO()
If DBGUNDO() is enabled (FASTRETRANS_DEBUG > 1), a compile
error will happen, since inet6_sk(sk)->daddr became sk->sk_v6_daddr
Fixes: efe4208f47f9 ("ipv6: make lookups simpler and faster") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp: fix wrong checksum calculation on MTU probing
With TCP MTU probing enabled and offload TX checksumming disabled,
tcp_mtu_probe() calculated the wrong checksum when a fragment being copied
into the probe's SKB had an odd length. This was caused by the direct use
of skb_copy_and_csum_bits() to calculate the checksum, as it pads the
fragment being copied, if needed. When this fragment was not the last, a
subsequent call used the previous checksum without considering this
padding.
The effect was a stale connection in one way, as even retransmissions
wouldn't solve the problem, because the checksum was never recalculated for
the full SKB length.
Signed-off-by: Douglas Caetano dos Santos <douglascs@taghos.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Sun, 18 Sep 2016 23:22:48 +0000 (16:22 -0700)]
sch_sfb: keep backlog updated with qlen
Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Sun, 18 Sep 2016 23:22:47 +0000 (16:22 -0700)]
sch_qfq: keep backlog updated with qlen
Reported-by: Stas Nichiporovich <stasn77@gmail.com> Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
A timer was used to restart after the bus-off state, leading to a
relatively large can_restart() executed in an interrupt context,
which in turn sets up pinctrl. When this happens during system boot,
there is a high probability of grabbing the pinctrl_list_mutex,
which is locked already by the probe() of other device, making the
kernel suspect a deadlock condition [1].
To resolve this issue, the restart_timer is replaced by a delayed
work.
Since the TFO socket is accepted right off SYN-data, the socket
owner can call getsockopt(TCP_INFO) to collect ongoing SYN-ACK
retransmission or timeout stats (i.e., tcpi_total_retrans,
tcpi_retransmits). Currently those stats are only updated
upon handshake completes. This patch fixes it.
Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes these under-accounting SNMP rtx stats
LINUX_MIB_TCPFORWARDRETRANS
LINUX_MIB_TCPFASTRETRANS
LINUX_MIB_TCPSLOWSTARTRETRANS
when retransmitting TSO packets
Fixes: 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time") Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 21 Sep 2016 03:33:15 +0000 (23:33 -0400)]
MAINTAINERS: Update b44 maintainer.
Taking over as maintainer since Gary Zambrano is no longer working
for Broadcom.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 21 Sep 2016 01:06:17 +0000 (18:06 -0700)]
net: get rid of an signed integer overflow in ip_idents_reserve()
Jiri Pirko reported an UBSAN warning happening in ip_idents_reserve()
[] UBSAN: Undefined behaviour in ./arch/x86/include/asm/atomic.h:156:11
[] signed integer overflow:
[] -2117905507 + -695755206 cannot be represented in type 'int'
Since we do not have uatomic_add_return() yet, use atomic_cmpxchg()
so that the arithmetics can be done using unsigned int.
Fixes: 04ca6973f7c1 ("ip: make IP identifiers less predictable") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Kamal Heib [Tue, 20 Sep 2016 11:55:31 +0000 (14:55 +0300)]
net/mlx4_core: Fix to clean devlink resources
This patch cleans devlink resources by calling devlink_port_unregister()
to avoid the following issues:
- Kernel panic when triggering reset flow.
- Memory leak due to unfreed resources in mlx4_init_port_info().
Fixes: 09d4d087cd48 ("mlx4: Implement devlink interface") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Vasut [Mon, 19 Sep 2016 19:34:01 +0000 (21:34 +0200)]
net: can: ifi: Configure transmitter delay
Configure the transmitter delay register at +0x1c to correctly handle
the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample
point) to a proper offset, so that the TDC mechanism works and won't
generate error frames on the CAN link.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Nicolas Dichtel [Mon, 19 Sep 2016 14:17:57 +0000 (16:17 +0200)]
vti6: fix input path
Since commit 1625f4529957, vti6 is broken, all input packets are dropped
(LINUX_MIB_XFRMINNOSTATES is incremented).
XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 is set by vti6_rcv() before calling
xfrm6_rcv()/xfrm6_rcv_spi(), thus we cannot set to NULL that value in
xfrm6_rcv_spi().
A new function xfrm6_rcv_tnl() that enables to pass a value to
xfrm6_rcv_spi() is added, so that xfrm6_rcv() is not touched (this function
is used in several handlers).
CC: Alexey Kodanev <alexey.kodanev@oracle.com> Fixes: 1625f4529957 ("net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_key") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When I introduced the lastuse member I made a subtle error because it was
returned as an absolute value but that is meaningless to user-space as it
doesn't allow to see how old exactly an entry is. Let's make it similar to
how the bridge returns such values and make it relative to "now" (jiffies).
This allows us to show the actual age of the entries and is much more
useful (e.g. user-space daemons can age out entries, iproute2 can display
the lastuse properly).
Fixes: 43b9e1274060 ("net: ipmr/ip6mr: add support for keeping an entry age") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter
We were missing check for 25G and 100G while checking port speed,
which lead to less number of queues getting allocated for 25G & 100G
adapters and leading to low throughput. Adding the missing check for
both NIC and vNIC driver.
Also fixes port advertisement for 25G and 100G in ethtool output.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Al Viro [Tue, 20 Sep 2016 19:07:42 +0000 (20:07 +0100)]
fix fault_in_multipages_...() on architectures with no-op access_ok()
Switching iov_iter fault-in to multipages variants has exposed an old
bug in underlying fault_in_multipages_...(); they break if the range
passed to them wraps around. Normally access_ok() done by callers will
prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into
such a range and they should not point to any valid objects).
However, on architectures where userland and kernel live in different
MMU contexts (e.g. s390) access_ok() is a no-op and on those a range
with a wraparound can reach fault_in_multipages_...().
Since any wraparound means EFAULT there, the fix is trivial - turn
those
while (uaddr <= end)
...
into
if (unlikely(uaddr > end))
return -EFAULT;
do
...
while (uaddr <= end);
Reported-by: Jan Stancek <jstancek@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Cc: stable@vger.kernel.org # v3.5+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fffffc0000f3b1a8 is a module address. Modules may have compiled in
strings which could get copied to userspace. In this instance, it
looks like "." which matches with a size of 1 byte. Extend the
is_vmalloc_addr check to be is_vmalloc_or_module_addr to cover
all possible cases.
Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org>
Commit fe56b9e6a8d95 ("qed: Add module with basic common support")
has introduced a stack corruption during probe, where filling a
local struct with data to be sent to management firmware is incorrectly
filled; The data is written outside of the struct and corrupts
the stack.
Changes from v1:
----------------
- Correct the value written [Caught by David Laight]
Fixes: fe56b9e6a8d95 ("qed: Add module with basic common support") Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 18 Sep 2016 19:17:19 +0000 (21:17 +0200)]
MAINTAINERS: Add an entry for the core network DSA code
The core distributed switch architecture code currently does not have
a MAINTAINERS entry, which results in some contributions not landing
in the right peoples inbox.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Bernat [Sun, 18 Sep 2016 15:46:07 +0000 (17:46 +0200)]
net: ipv6: fallback to full lookup if table lookup is unsuitable
Commit 8c14586fc320 ("net: ipv6: Use passed in table for nexthop
lookups") introduced a regression: insertion of an IPv6 route in a table
not containing the appropriate connected route for the gateway but which
contained a non-connected route (like a default gateway) fails while it
was previously working:
$ ip link add eth0 type dummy
$ ip link set up dev eth0
$ ip addr add 2001:db8::1/64 dev eth0
$ ip route add ::/0 via 2001:db8::5 dev eth0 table 20
$ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
RTNETLINK answers: No route to host
$ ip -6 route show table 20
default via 2001:db8::5 dev eth0 metric 1024 pref medium
After this patch, we get:
$ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
$ ip -6 route show table 20
2001:db8:cafe::1 via 2001:db8::6 dev eth0 metric 1024 pref medium
default via 2001:db8::5 dev eth0 metric 1024 pref medium
Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Signed-off-by: Vincent Bernat <vincent@bernat.im> Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 20 Sep 2016 02:10:25 +0000 (22:10 -0400)]
Merge branch 'mlx5-fixes'
Or Gerlitz says:
====================
mlx5 fixes to 4.8-rc6
This series series has a fix from Roi to memory corruption bug in
the bulk flow counters code and two late and hopefully last fixes
from me to the new eswitch offloads code.
Series done over net commit 37dd348 "bna: fix crash in bnad_get_strings()"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Sun, 18 Sep 2016 15:20:29 +0000 (18:20 +0300)]
net/mlx5: E-Switch, Handle mode change failures
E-switch mode changes involve creating HW tables, potentially allocating
netdevices, etc, and things can fail. Add an attempt to rollback to the
existing mode when changing to the new mode fails. Only if rollback fails,
getting proper SRIOV functionality requires module unload or sriov
disablement/enablement.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Sun, 18 Sep 2016 15:20:28 +0000 (18:20 +0300)]
net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code
When enablement of the SRIOV e-switch in certain mode (switchdev or legacy)
fails, we must set the mode to none. Otherwise, we'll run into double free
based crashes when further attempting to deal with the e-switch (such
as when disabling sriov or unloading the driver).
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Roi Dayan [Sun, 18 Sep 2016 15:20:27 +0000 (18:20 +0300)]
net/mlx5: Fix flow counter bulk command out mailbox allocation
The FW command output length should be only the length of struct
mlx5_cmd_fc_bulk out field. Failing to do so will cause the memcpy
call which is invoked later in the driver to write over wrong memory
address and corrupt kernel memory which results in random crashes.
This bug was found using the kernel address sanitizer (kasan).
Fixes: a351a1b03bf1 ('net/mlx5: Introduce bulk reading of flow counters') Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
rapidio/rio_cm: avoid GFP_KERNEL in atomic context
Revert "ocfs2: bump up o2cb network protocol version"
ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
cgroup: duplicate cgroup reference when cloning sockets
mm: memcontrol: make per-cpu charge cache IRQ-safe for socket accounting
ocfs2: fix double unlock in case retry after free truncate log
fanotify: fix list corruption in fanotify_get_response()
fsnotify: add a way to stop queueing events on group shutdown
ocfs2: fix trans extend while free cached blocks
ocfs2: fix trans extend while flush truncate log
ipc/shm: fix crash if CONFIG_SHMEM is not set
mm: fix the page_swap_info() BUG_ON check
autofs: use dentry flags to block walks during expire
MAINTAINERS: update email for VLYNQ bus entry
mm: avoid endless recursion in dump_page()
mm, thp: fix leaking mapped pte in __collapse_huge_page_swapin()
khugepaged: fix use-after-free in collapse_huge_page()
MAINTAINERS: Maik has moved
ocfs2/dlm: fix race between convert and migration
mem-hotplug: don't clear the only node in new_node_page()
rapidio/rio_cm: avoid GFP_KERNEL in atomic context
As reported by Alexey Khoroshilov (https://lkml.org/lkml/2016/9/9/737):
riocm_send_close() is called from rio_cm_shutdown() under
spin_lock_bh(idr_lock), but riocm_send_close() uses a GFP_KERNEL
allocation.
Fix by taking riocm_send_close() outside of spinlock protected code.
Junxiao Bi [Mon, 19 Sep 2016 21:44:44 +0000 (14:44 -0700)]
Revert "ocfs2: bump up o2cb network protocol version"
This reverts commit 38b52efd218b ("ocfs2: bump up o2cb network protocol
version").
This commit made rolling upgrade fail. When one node is upgraded to new
version with this commit, the remaining nodes will fail to establish
connections to it, then the application like VMs on the remaining nodes
can't be live migrated to the upgraded one. This will cause an outage.
Since negotiate hb timeout behavior didn't change without this commit,
so revert it.
Fixes: 38b52efd218bf ("ocfs2: bump up o2cb network protocol version") Link: http://lkml.kernel.org/r/1471396924-10375-1-git-send-email-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
If we punch a hole on a reflink such that following conditions are met:
1. start offset is on a cluster boundary
2. end offset is not on a cluster boundary
3. (end offset is somewhere in another extent) or
(hole range > MAX_CONTIG_BYTES(1MB)),
we dont COW the first cluster starting at the start offset. But in this
case, we were wrongly passing this cluster to
ocfs2_zero_range_for_truncate() to zero out. This will modify the
cluster in place and zero it in the source too.
Fix this by skipping this cluster in such a scenario.
To reproduce:
1. Create a random file of say 10 MB
xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile
2. Reflink it
reflink -f 10MBfile reflnktest
3. Punch a hole at starting at cluster boundary with range greater that
1MB. You can also use a range that will put the end offset in another
extent.
fallocate -p -o 0 -l 1048615 reflnktest
4. sync
5. Check the first cluster in the source file. (It will be zeroed out).
dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C
Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.com Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Reported-by: Saar Maoz <saar.maoz@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Mon, 19 Sep 2016 21:44:38 +0000 (14:44 -0700)]
cgroup: duplicate cgroup reference when cloning sockets
When a socket is cloned, the associated sock_cgroup_data is duplicated
but not its reference on the cgroup. As a result, the cgroup reference
count will underflow when both sockets are destroyed later on.
Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup") Link: http://lkml.kernel.org/r/20160914194846.11153-2-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Mon, 19 Sep 2016 21:44:36 +0000 (14:44 -0700)]
mm: memcontrol: make per-cpu charge cache IRQ-safe for socket accounting
During cgroup2 rollout into production, we started encountering css
refcount underflows and css access crashes in the memory controller.
Splitting the heavily shared css reference counter into logical users
narrowed the imbalance down to the cgroup2 socket memory accounting.
The problem turns out to be the per-cpu charge cache. Cgroup1 had a
separate socket counter, but the new cgroup2 socket accounting goes
through the common charge path that uses a shared per-cpu cache for all
memory that is being tracked. Those caches are safe against scheduling
preemption, but not against interrupts - such as the newly added packet
receive path. When cache draining is interrupted by network RX taking
pages out of the cache, the resuming drain operation will put references
of in-use pages, thus causing the imbalance.
Disable IRQs during all per-cpu charge cache operations.
Fixes: f7e1cb6ec51b ("mm: memcontrol: account socket memory in unified hierarchy memory controller") Link: http://lkml.kernel.org/r/20160914194846.11153-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Mon, 19 Sep 2016 21:44:33 +0000 (14:44 -0700)]
ocfs2: fix double unlock in case retry after free truncate log
If ocfs2_reserve_cluster_bitmap_bits() fails with ENOSPC, it will try to
free truncate log and then retry. Since ocfs2_try_to_free_truncate_log
will lock/unlock global bitmap inode, we have to unlock it before
calling this function. But when retry reserve and it fails with no
global bitmap inode lock taken, it will unlock again in error handling
branch and BUG.
This issue also exists if no need retry and then ocfs2_inode_lock fails.
So fix it.
Fixes: 2070ad1aebff ("ocfs2: retry on ENOSPC if sufficient space in truncate log") Link: http://lkml.kernel.org/r/57D91939.6030809@huawei.com Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Mon, 19 Sep 2016 21:44:30 +0000 (14:44 -0700)]
fanotify: fix list corruption in fanotify_get_response()
fanotify_get_response() calls fsnotify_remove_event() when it finds that
group is being released from fanotify_release() (bypass_perm is set).
However the event it removes need not be only in the group's notification
queue but it can have already moved to access_list (userspace read the
event before closing the fanotify instance fd) which is protected by a
different lock. Thus when fsnotify_remove_event() races with
fanotify_release() operating on access_list, the list can get corrupted.
Fix the problem by moving all the logic removing permission events from
the lists to one place - fanotify_release().
Fixes: 5838d4442bd5 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Miklos Szeredi <mszeredi@redhat.com> Tested-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Mon, 19 Sep 2016 21:44:24 +0000 (14:44 -0700)]
ocfs2: fix trans extend while free cached blocks
The root cause of this issue is the same with the one fixed by the last
patch, but this time credits for allocator inode and group descriptor
may not be consumed before trans extend.
Junxiao Bi [Mon, 19 Sep 2016 21:44:21 +0000 (14:44 -0700)]
ocfs2: fix trans extend while flush truncate log
Every time, ocfs2_extend_trans() included a credit for truncate log
inode, but as that inode had been managed by jbd2 running transaction
first time, it will not consume that credit until
jbd2_journal_restart().
Since total credits to extend always included the un-consumed ones,
there will be more and more un-consumed credit, at last
jbd2_journal_restart() will fail due to credit number over the half of
max transction credit.
The following error was caught when unlinking a large file with many
extents:
Commit c01d5b300774 ("shmem: get_unmapped_area align huge page") makes
use of shm_get_unmapped_area() in shm_file_operations() unconditional to
CONFIG_MMU.
As Tony Battersby pointed this can lead NULL-pointer dereference on
machine with CONFIG_MMU=y and CONFIG_SHMEM=n. In this case ipc/shm is
backed by ramfs which doesn't provide f_op->get_unmapped_area for
configurations with MMU.
The solution is to provide dummy f_op->get_unmapped_area for ramfs when
CONFIG_MMU=y, which just call current->mm->get_unmapped_area().
Fixes: c01d5b300774 ("shmem: get_unmapped_area align huge page") Link: http://lkml.kernel.org/r/20160912102704.140442-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Tony Battersby <tonyb@cybernetics.com> Tested-by: Tony Battersby <tonyb@cybernetics.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.7.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 62c230bc1790 ("mm: add support for a filesystem to activate
swap files and use direct_IO for writing swap pages") replaced the
swap_aops dirty hook from __set_page_dirty_no_writeback() with
swap_set_page_dirty().
For normal cases without these special SWP flags code path falls back to
__set_page_dirty_no_writeback() so the behaviour is expected to be the
same as before.
But swap_set_page_dirty() makes use of the page_swap_info() helper to
get the swap_info_struct to check for the flags like SWP_FILE,
SWP_BLKDEV etc as desired for those features. This helper has
BUG_ON(!PageSwapCache(page)) which is racy and safe only for the
set_page_dirty_lock() path.
For the set_page_dirty() path which is often needed for cases to be
called from irq context, kswapd() can toggle the flag behind the back
while the call is getting executed when system is low on memory and
heavy swapping is ongoing.
This ends up with undesired kernel panic.
This patch just moves the check outside the helper to its users
appropriately to fix kernel panic for the described path. Couple of
users of helpers already take care of SwapCache condition so I skipped
them.
Link: http://lkml.kernel.org/r/1473460718-31013-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Joe Perches <joe@perches.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rik van Riel <riel@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jens Axboe <axboe@fb.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [4.7.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Kent [Mon, 19 Sep 2016 21:44:12 +0000 (14:44 -0700)]
autofs: use dentry flags to block walks during expire
Somewhere along the way the autofs expire operation has changed to hold
a spin lock over expired dentry selection. The autofs indirect mount
expired dentry selection is complicated and quite lengthy so it isn't
appropriate to hold a spin lock over the operation.
Commit 47be61845c77 ("fs/dcache.c: avoid soft-lockup in dput()") added a
might_sleep() to dput() causing a WARN_ONCE() about this usage to be
issued.
But the spin lock doesn't need to be held over this check, the autofs
dentry info. flags are enough to block walks into dentrys during the
expire.
I've left the direct mount expire as it is (for now) because it is much
simpler and quicker than the indirect mount expire and adding spin lock
release and re-aquires would do nothing more than add overhead.
Fixes: 47be61845c77 ("fs/dcache.c: avoid soft-lockup in dput()") Link: http://lkml.kernel.org/r/20160912014017.1773.73060.stgit@pluto.themaw.net Signed-off-by: Ian Kent <raven@themaw.net> Reported-by: Takashi Iwai <tiwai@suse.de> Tested-by: Takashi Iwai <tiwai@suse.de> Cc: Takashi Iwai <tiwai@suse.de> Cc: NeilBrown <neilb@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dump_page() uses page_mapcount() to get mapcount of the page.
page_mapcount() has VM_BUG_ON_PAGE(PageSlab(page)) as mapcount doesn't
make sense for slab pages and the field in struct page used for other
information.
It leads to recursion if dump_page() called for slub page and DEBUG_VM
is enabled:
mm, thp: fix leaking mapped pte in __collapse_huge_page_swapin()
Currently, khugepaged does not permit swapin if there are enough young
pages in a THP. The problem is when a THP does not have enough young
pages, khugepaged leaks mapped ptes.
This patch prohibits leaking mapped ptes.
Link: http://lkml.kernel.org/r/1472820276-7831-1-git-send-email-ebru.akagunduz@gmail.com Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com> Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
khugepaged: fix use-after-free in collapse_huge_page()
hugepage_vma_revalidate() tries to re-check if we still should try to
collapse small pages into huge one after the re-acquiring mmap_sem.
The problem Dmitry Vyukov reported[1] is that the vma found by
hugepage_vma_revalidate() can be suitable for huge pages, but not the
same vma we had before dropping mmap_sem. And dereferencing original
vma can lead to fun results..
Let's use vma hugepage_vma_revalidate() found instead of assuming it's the
same as what we had before the lock was dropped.
Joseph Qi [Mon, 19 Sep 2016 21:43:55 +0000 (14:43 -0700)]
ocfs2/dlm: fix race between convert and migration
Commit ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery")
checks if lockres master has changed to identify whether new master has
finished recovery or not. This will introduce a race that right after
old master does umount ( means master will change), a new convert
request comes.
In this case, it will reset lockres state to DLM_RECOVERING and then
retry convert, and then fail with lockres->l_action being set to
OCFS2_AST_INVALID, which will cause inconsistent lock level between
ocfs2 and dlm, and then finally BUG.
Since dlm recovery will clear lock->convert_pending in
dlm_move_lockres_to_recovery_list, we can use it to correctly identify
the race case between convert and recovery. So fix it.
Fixes: ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery") Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.com Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zhong [Mon, 19 Sep 2016 21:43:52 +0000 (14:43 -0700)]
mem-hotplug: don't clear the only node in new_node_page()
Commit 394e31d2ceb4 ("mem-hotplug: alloc new page from a nearest
neighbor node when mem-offline") introduced new_node_page() for memory
hotplug.
In new_node_page(), the nid is cleared before calling
__alloc_pages_nodemask(). But if it is the only node of the system, and
the first round allocation fails, it will not be able to get memory from
an empty nodemask, and will trigger oom.
The patch checks whether it is the last node on the system, and if it
is, then don't clear the nid in the nodemask.
Fixes: 394e31d2ceb4 ("mem-hotplug: alloc new page from a nearest neighbor node when mem-offline") Link: http://lkml.kernel.org/r/1473044391.4250.19.camel@TP420 Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Reported-by: John Allen <jallen@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
scripts/faddr2line: improve on base path filtering a bit
Due to our compiler include directives, the build pathnames for header
files often end up being of the form "$srcdir/./include/linux/xyz.h",
which ends up having that extra "." path component after the build base
in it.
Teach faddr2line to skip that too, to make code generated in inline
functions in header files match the filename for the regular C files.
Rabin Vincent pointed out that I can't make a stricter regexp match by
using the " at " prefix for the pathname, because that ends up being
locale-dependent. But this does require that the path match be preceded
by a space, to make it a bit more strict (that matters mainly if we
didn't find any base_dir at all, and we only end up with the "./" part
of the match)
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a potential weakness in IPsec CBC IV generation, as well as
a number of issues that arose out of an OOM crash on ARM with CTR-mode
AES"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm64/aes-ctr - fix NULL dereference in tail processing
crypto: arm/aes-ctr - fix NULL dereference in tail processing
crypto: skcipher - Fix blkcipher walk OOM crash
crypto: echainiv - Replace chaining with multiplication
Merge tag 'drm-fixes-for-4.8-rc7' of git://people.freedesktop.org/~airlied/linux
Pull exynos and one stable ABI fix from Dave Airlie:
"One important drm 32/64 ABI fix came in so I'll dequeue what I have,
the rest is just exynos runtime pm fixes, but the net removal of code
seems like a win to me.
I'm going to be sporadic this week due to school holidays, so if
anything urgent turns up, Daniel will take care of it"
* tag 'drm-fixes-for-4.8-rc7' of git://people.freedesktop.org/~airlied/linux:
drm: Only use compat ioctl for addfb2 on X86/IA64
Subject: [PATCH, RESEND] drm: exynos: avoid unused function warning
drm/exynos: g2d: fix system and runtime pm integration
drm/exynos: rotator: fix system and runtime pm integration
drm/exynos: gsc: fix system and runtime pm integration
drm/exynos: fimc: fix system and runtime pm integration
exynos-drm: Fix unsupported GEM memory type error message to be clear
Hans Verkuil [Sun, 18 Sep 2016 14:24:50 +0000 (11:24 -0300)]
[media] cx23885/saa7134: assign q->dev to the PCI device
Fix a regression caused by commit 2bc46b3ad3c1 ("[media] media/pci:
convert drivers to use the new vb2_queue dev field").
Three places where q->dev should be set were missed, causing
a WARN.
Fixes: 2bc46b3ad3c1 ("[media] media/pci: convert drivers to use the new vb2_queue dev field"). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Marton Balint <cus@passwd.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The reason for this suspend error is because when the CAN interface is not
active the clocks are disabled and then flexcan_chip_enable() will
always fail due to a timeout error.
In order to fix this issue, only call flexcan_chip_enable/disable()
when the CAN interface is active.
Based on a patch from Dong Aisheng in the NXP kernel.
Ilan Tayari [Sun, 18 Sep 2016 07:42:53 +0000 (07:42 +0000)]
xfrm: Fix memory leak of aead algorithm name
commit 1a6509d99122 ("[IPSEC]: Add support for combined mode algorithms")
introduced aead. The function attach_aead kmemdup()s the algorithm
name during xfrm_state_construct().
However this memory is never freed.
Implementation has since been slightly modified in
commit ee5c23176fcc ("xfrm: Clone states properly on migration")
without resolving this leak.
This patch adds a kfree() call for the aead algorithm name.
Fixes: 1a6509d99122 ("[IPSEC]: Add support for combined mode algorithms") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Acked-by: Rami Rosen <roszenrami@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an
unaligned 64 bit field (modifier). This get packed differently between
32 bit and 64 bit modes on architectures that can handle unaligned 64
bit access (X86 and IA64). Other architectures pack the structs the
same and don't need the compat wrapper. Use the same condition for
drm_mode_fb_cmd2 as we use for drm_update_draw.
Note that only the modifier will be packed differently between compat
and non-compat versions.
Dave Airlie [Mon, 19 Sep 2016 04:22:56 +0000 (14:22 +1000)]
Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Just fixup to runtime pm usage and some cleanups.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
Subject: [PATCH, RESEND] drm: exynos: avoid unused function warning
drm/exynos: g2d: fix system and runtime pm integration
drm/exynos: rotator: fix system and runtime pm integration
drm/exynos: gsc: fix system and runtime pm integration
drm/exynos: fimc: fix system and runtime pm integration
exynos-drm: Fix unsupported GEM memory type error message to be clear
David S. Miller [Mon, 19 Sep 2016 02:26:49 +0000 (22:26 -0400)]
Merge tag 'mac80211-for-davem-2016-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more fixes:
* reject aggregation sessions for TSID/TID 8-16 that we
can never use anyway and which could confuse drivers
* check return value of skb_linearize()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
stmmac: fix PWRDWN into the PMT register for global unicast.
MAC devices use the RWKPKTEN and MGKPKTEN bits of the PMT Control/Status
register to generate power management events.
So this patch is to properly set the RWKPKTEN [BIT(2)] inside the
PMT register (needed in case of global unicast).
Reported-by: Aditi SHARMA <aditi-hed.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Subject: [PATCH, RESEND] drm: exynos: avoid unused function warning
When CONFIG_PM is not set, we get a warning about an unused function:
drivers/gpu/drm/exynos/exynos_drm_gsc.c:1219:12: error: 'gsc_clk_ctrl' defined but not used [-Werror=unused-function]
static int gsc_clk_ctrl(struct gsc_context *ctx, bool enable)
^~~~~~~~~~~~
This removes the two #ifdef checks in this file and instead marks the
functions as __maybe_unused, which is a more reliable way of doing the
same, allowing better build coverage and avoiding the warning above.
Merge tag 'usb-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are two small fixes, and one new device id, for 4.8-rc7
The fixes solve a build error that was reported in your tree for the
blackfin arch, and resolve an issue with a number of broken USB
devices that reported the wrong interval rate. Included here is also
a new device id for the usb-serial driver.
All have been in linux-next with no reported issues"
* tag 'usb-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: change bInterval default to 10 ms
usb: musb: Fix tusb6010 compile error on blackfin
USB: serial: simple: add support for another Infineon flashloader
Merge tag 'fixes-for-linus-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull uaccess fixes from Guenter Roeck:
"Two patches fixing problems introduced with copy_from_user changes"
* tag 'fixes-for-linus-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
openrisc: fix the fix of copy_from_user()
avr32: fix 'undefined reference to `___copy_from_user'
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A couple of small fixes to x86 perf drivers:
- Measure L2 for HW_CACHE* events on AMD
- Fix the address filter handling in the intel/pt driver
- Handle the BTS disabling at the proper place"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd: Make HW_CACHE_REFERENCES and HW_CACHE_MISSES measure L2
perf/x86/intel/pt: Do validate the size of a kernel address filter
perf/x86/intel/pt: Fix kernel address filter's offset validation
perf/x86/intel/pt: Fix an off-by-one in address filter configuration
perf/x86/intel: Don't disable "intel_bts" around "intel" event batching
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two patches from Boris which address a potential deadlock in the atmel
irq chip driver"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/atmel-aic: Fix potential deadlock in ->xlate()
genirq: Provide irq_gc_{lock_irqsave,unlock_irqrestore}() helpers
Since commit acb2505d0119 ("openrisc: fix copy_from_user()"),
copy_from_user() returns the number of bytes requested, not the
number of bytes not copied.
avr32: fix 'undefined reference to `___copy_from_user'
avr32 builds fail with:
arch/avr32/kernel/built-in.o: In function `arch_ptrace':
(.text+0x650): undefined reference to `___copy_from_user'
arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined
reference to `___copy_from_user'
kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax':
(.text+0x5dd8): undefined reference to `___copy_from_user'
kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin':
sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user'
kernel/built-in.o: In function `ptrace_has_cap':
ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user'
kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to
`___copy_from_user' follow
Marek Szyprowski [Wed, 31 Aug 2016 12:55:57 +0000 (14:55 +0200)]
drm/exynos: g2d: fix system and runtime pm integration
Move code from system sleep pm to runtime pm callbacks to ensure proper
driver state preservation when device is under power domain. Then, use
generic helpers for using runtime pm for system sleep pm.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
projects / mirror_ubuntu-hirsute-kernel.git / log