Sascha Hauer [Fri, 14 Jun 2019 07:23:51 +0000 (09:23 +0200)]
Bluetooth: hci_mrvl: Add serdev support
This adds serdev support to the Marvell hci uart driver. Only basic
serdev support, none of the fancier features like regulator or enable
GPIO support is added for now.
Sascha Hauer [Fri, 14 Jun 2019 07:23:50 +0000 (09:23 +0200)]
Bluetooth: hci_mrvl: Wait for final ack before switching baudrate
For the Marvell HCI UART we have to upload two firmware files. The first
one is only for switching the baudrate of the device to a higher
baudrate. After the baudrate switching firmware has been uploaded the
device waits for a final ack (0x5a) before actually switching the
baudrate. To send this final ack with the old baudrate give the hci
ldisc workqueue a chance to run before switching the baudrate. Without
this the final ack will never be received by the device and firmware
upload fails.
Sascha Hauer [Fri, 14 Jun 2019 07:23:49 +0000 (09:23 +0200)]
Bluetooth: hci_ldisc: Add function to wait for characters to be sent
The hci UART line discipline sends its characters in a workqueue. Some
devices like the Marvell Bluetooth chips need to make sure that all
queued characters are sent before switching the baudrate. This adds
a function to synchronize with the workqueue.
6lowpan: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Because we don't care if debugfs works or not, this trickles back a bit
so we can clean things up by making some functions return void instead
of an error value that is never going to fail.
This is caused by a vendor event that corresponds to an earlier command
to change the baudrate. The event is not processed in the context of the
baudrate change and is later interpreted as response to the firmware
download command (which is also a vendor command), but the driver detects
that the event doesn't have the expected amount of associated data.
More details:
For the WCN3990 the vendor command for a baudrate change isn't sent as
synchronous HCI command, because the controller sends the corresponding
vendor event with the new baudrate. The event is received and decoded
after the baudrate change of the host port.
Identify the 'unused' event when it is received and don't add it to
the queue of RX frames.
Bluetooth: btqca: inject command complete event during fw download
Latest qualcomm chips are not sending an command complete event for
every firmware packet sent to chip. They only respond with a vendor
specific event for the last firmware packet. This optimization will
decrease the BT ON time. Due to this we are seeing a timeout error
message logs on the console during firmware download. Now we are
injecting a command complete event once we receive an vendor specific
event for the last RAM firmware packet.
Fix some warnings and one error reported by checkpatch.pl:
- lines longer than 80 characters are wrapped
- empty lines inserted to separate variable declarations from the actual
code
- line break inserted after if (...)
Co-developed-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de> Cc: linux-kernel@i4.cs.fau.de Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Jian-Hong Pan [Tue, 25 Jun 2019 08:30:51 +0000 (16:30 +0800)]
Bluetooth: btrtl: HCI reset on close for Realtek BT chip
Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly
after on-off several times. Bluetooth daemon sets BT mode failed when
this issue happens. Scanning must be active while turning off for this
bug to be hit.
bluetoothd[1576]: Failed to set mode: Failed (0x03)
If BT is turned off, then turned on again, it works correctly again.
According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set
during probing. So, this patch makes Realtek's BT reset on close to fix
this issue.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429 Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Extract the new function send_command_from_firmware from
download_firmware, which helps with the readability of the switch
statement. This way the code is less deeply nested and also no longer
exceeds the 80 character limit.
Co-developed-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Bluetooth: hci_ll: set operational frequency earlier
Uploading the firmware needs quite a few seconds if done at 115200 kbps. So set
the operational frequency, usually 3 MHz, before uploading the firmware.
I have successfully tested this with a wl1837mod.
Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Peter Robinson [Sun, 30 Jun 2019 22:14:08 +0000 (23:14 +0100)]
Bluetooth: btsdio: Do not bind to non-removable BCM4356
BCM4356 devices soldered onto the PCB (non-removable) use an UART
connection for bluetooth, such as the Rock960, but it also advertise
btsdio support as a sdio function.
David S. Miller [Fri, 5 Jul 2019 23:29:20 +0000 (16:29 -0700)]
Merge branch 'mlx5-TLS-TX-HW-offload-support'
Tariq Toukan says:
====================
mlx5 TLS TX HW offload support
This series from Eran and me, adds TLS TX HW offload support to
the mlx5 driver.
This offloads the kTLS encryption process from kernel to the
Mellanox NIC, saving CPU cycles and improving utilization.
Upon a new TLS connection request, driver is responsible to create
a dedicated HW context and configure it according to the crypto info,
so HW can do the encryption itself.
When the HW context gets out-of-sync (i.e. due to packets retransmission),
driver is responsible for the re-sync process.
This is done by posting special resync descriptors to the HW.
Feature is supported on Mellanox Connect-X 6DX, and newer.
Series was tested on SimX simulator.
Series generated against net-next commit [1], with Saeed's request pulled [2]:
Changes from last pull request:
Fixed comments from Jakub:
Patch 4:
- Replace zero memset with a call to memzero_explicit().
Patch 11:
- Fix stats counters names.
- Drop TLS SKB with non-matching netdev.
====================
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for transmit side kernel-TLS acceleration.
Offload the crypto encryption to HW.
Per TLS connection:
- Use a separate TIS to maintain the HW context.
- Use a separate encryption key.
- Maintain static and progress HW contexts by posting the proper
WQEs at creation time, or upon resync.
- Use a special DUMP opcode to replay the previous frags and sync
the HW context.
To make sure the SQ is able to serve an xmit request, increase
SQ stop room to cover:
- static params WQE,
- progress params WQE, and
- resync DUMP per frag.
Currently supporting TLS 1.2, and key size 128bit.
Tested over SimX simulator.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5e: Introduce a fenced NOP WQE posting function
Similar to the existing mlx5e_post_nop(), but marks a fence
in the WQE control segment.
Added as a separate new function to not hurt the performance
of the common case.
To be used in a downstream patch of the series.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Let the EN TIS creation function (mlx5e_create_tis) be responsible
for applying common mdev related fields.
Other specific fields must be set by the caller and passed within
the inbox.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Use an SQ field for stop_room, and use the larger value only if TLS
is supported.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Fri, 5 Jul 2019 15:30:18 +0000 (18:30 +0300)]
net/mlx5e: Tx, Don't implicitly assume SKB-less wqe has one WQEBB
When polling a CQE of an SKB-less WQE, don't assume it consumed only
one WQEBB. Use wi->num_wqebbs directly instead.
In the downstream patch, SKB-less WQEs might have more the one WQEBB,
thus this change is needed.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5e: Tx, Make SQ WQE fetch function type generic
Change mlx5e_sq_fetch_wqe to be agnostic to the Work Queue
Element (WQE) type.
Before this patch, it was specific for struct mlx5e_tx_wqe.
In order to allow the change, the function now returns the
generic void pointer, and gets the WQE size to do the zero
memset.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When ctrl->tisn field exists, this indicates an operation (HW offload)
on the TCP payload.
For such WQEs, inline the headers up to L4.
This is in preparation for kTLS HW offload support, added in
a downstream patch.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5e: Move helper functions to a new txrx datapath header
Take datapath helper functions to a new header file en/txrx.h.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5: Accel, Add core TLS support for the Connect-X family
Add support for the new TLS implementation of the Connect-X family.
Introduce a new compilation flag MLX5_TLS for it.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5: Add crypto library to support create/destroy encryption key
Encryption key create / destroy is done via
CREATE_GENERAL_OBJECT / DESTROY_GENERAL_OBJECT commands.
To be used in downstream patches by TLS API wrappers, to configure
the TIS context with the encryption key.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5: Kconfig, Better organize compilation flags
Always contain all acceleration functions declarations in
'accel' files, independent to the flags setting.
For this, introduce new flags CONFIG_FPGA_{IPSEC/TLS} and use stubs
where needed.
This obsoletes the need for stubs in 'fpga' files. Remove them.
Also use the new flags in Makefile, to decide whether to compile
TLS-specific or IPSEC-specific objects, or not.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5: Accel, Expose accel wrapper for IPsec FPGA function
Do not directly call fpga version of IPsec function from main.c.
Wrap it by an accel version, and call the wrapper.
This will allow deprecating the FPGA IPsec stubs in downstream
patch.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
For spinlocks the type spinlock_t should be used instead of "struct
spinlock".
Use spinlock_t for spinlock's definition.
Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: oss-drivers@netronome.com Cc: netdev@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: netsec: Sync dma for device on buffer allocation
Quoting Arnd,
We have to do a sync_single_for_device /somewhere/ before the
buffer is given to the device. On a non-cache-coherent machine with
a write-back cache, there may be dirty cache lines that get written back
after the device DMA's data into it (e.g. from a previous memset
from before the buffer got freed), so you absolutely need to flush any
dirty cache lines on it first.
Since the coherency is configurable in this device make sure we cover
all configurations by explicitly syncing the allocated buffer for the
device before refilling it's descriptors
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Thu, 4 Jul 2019 14:04:28 +0000 (22:04 +0800)]
net: hns3: set maximum length to resp_data_len for exceptional case
If HCLGE_MBX_MAX_RESP_DATA_SIZE > HCLGE_MBX_MAX_RESP_DATA_SIZE,
the memcpy will cause out of memory. So this patch just set
resp_data_len to the maximum length for this case.
Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 4 Jul 2019 14:04:27 +0000 (22:04 +0800)]
net: hns3: bitwise operator should use unsigned type
There are some bitwise operator used signed type, this patch fixes
them with unsigned type.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Thu, 4 Jul 2019 14:04:26 +0000 (22:04 +0800)]
net: hns3: add default value for tc_size and tc_offset
This patch adds default value for tc_size and tc_offset, or it may
get random value and used later.
Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Weihang Li [Thu, 4 Jul 2019 14:04:25 +0000 (22:04 +0800)]
net: hns3: check msg_data before memcpy in hclgevf_send_mbx_msg
The value of msg_data may be NULL in some cases, which will cause
errors reported by some compiler.
So this patch adds a check to fix it.
Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Thu, 4 Jul 2019 14:04:24 +0000 (22:04 +0800)]
net: hns3: set default value for param "type" in hclgevf_bind_ring_to_vector
The value of param type is always not changed in
hclgevf_bind_ring_to_vector, move the assignment to
front of "for {}" can reduce the redundant assignment.
Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Thu, 4 Jul 2019 14:04:23 +0000 (22:04 +0800)]
net: hns3: add all IMP return code
Currently, the HNS3 driver just defines part of IMP return code,
This patch supplements all the remaining IMP return code, and adds
a function to convert this code to the error number.
Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the driver queries the media port information, and
updates the port capability periodically. But it sets an error
mac->speed_type value, which stops update port capability.
Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: hns3: fix flow control configure issue for fibre port
Flow control autoneg is unsupported for fibre port. It takes no
effect for flow control when restart autoneg. This patch fixes
it, return -EOPNOTSUPP when user tries to enable flow control
autoneg.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: hns3: enable broadcast promisc mode when initializing VF
For revision 0x20, the broadcast promisc is enabled by firmware,
it's unnecessary to enable it when initializing VF.
For revision 0x21, it's necessary to enable broadcast promisc mode
when initializing or re-initializing VF, otherwise, it will be
unable to send and receive promisc packets.
Fixes: f01f5559cac8 ("net: hns3: don't allow vf to enable promisc mode") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In order to get more accurate hardware time stamping in Spectrum-1, the
driver needs to apply a shaper on the port for speeds lower than 40Gbps.
This shaper is called a PTP shaper and it is applied on hierarchy 0,
which is the port hierarchy. This shaper may affect the shaper rates of
all hierarchies.
This patchset adds the ability to enable or disable the PTP shaper on
the port in two scenarios:
1. When the user wants to enable/disable the hardware time stamping
2. When the port is brought up or down (including port speed change)
Patch #1 adds the QEEC.ptps field that is used for enabling or disabling
the PTP shaper on a port.
Patch #2 adds a note about disabling the PTP shaper when calling to
mlxsw_sp_port_ets_maxrate_set().
Patch #3 adds the QPSC register that is responsible for configuring the
PTP shaper parameters per speed.
Patch #4 sets the PTP shaper parameters during the ptp_init().
Patch #5 adds new operation for getting the port's speed.
Patch #6 enables/disables the PTP shaper when turning on or off the
hardware time stamping.
Patch #7 enables/disables the PTP shaper when the port's status has
changed (including port speed change).
Patch #8 applies the PTP shaper enable/disable logic by filling the PTP
shaper parameters array.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum_ptp: Enable/disable PTP shaper on a port when getting HWTSTAMP on/off
In order to get more accurate hardware time stamping, the driver needs to
enable PTP shaper on the port, for speeds lower than 40 Gbps.
Enable the PTP shaper on the port when the user turns on the hardware
time stamping, and disable it when the user turns off the hardware time
stamping.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum_ptp: Set the PTP shaper parameters
Set the PTP shaper parameters during the ptp_init(). For different
speeds, there are different parameters.
When the port's speed changes and PTP shaper is enabled, the firmware
changes the ETS shaper values according to the PTP shaper parameters for
this new speed.
The PTP shaper parameters array is left empty for now, will be filled in
a follow-up patch.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: socionext: remove set but not used variable 'pkts'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/socionext/netsec.c: In function 'netsec_clean_tx_dring':
drivers/net/ethernet/socionext/netsec.c:637:15: warning:
variable 'pkts' set but not used [-Wunused-but-set-variable]
It is not used since commit ba2b232108d3 ("net: netsec: add XDP support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Several drivers cast a struct device pointer to a struct
platform_device pointer only to then call platform_get_drvdata().
To improve readability, these constructs can be simplified
by using dev_get_drvdata() directly.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Several drivers cast a struct device pointer to a struct
platform_device pointer only to then call platform_get_drvdata().
To improve readability, these constructs can be simplified
by using dev_get_drvdata() directly.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The callback is invoked using 'devlink dev info <pci>' command and returns
the running and pending firmware version of the HCA and the name of the
kernel driver.
If there is a pending firmware version (a new version is burned but the
HCA still runs with the previous) it is returned as the stored
firmware version. Otherwise, the running version is returned for this
field.
Output example:
$ devlink dev info pci/0000:00:06.0
pci/0000:00:06.0:
driver mlx5_core
versions:
fixed:
fw.psid MT_0000000009
running:
fw.version 16.26.0100
stored:
fw.version 16.26.0100
Using the MCQI and MCQS registers, we query the running and pending
fw version of the HCA.
The MCQS is queried with sequentially increasing component index, until
a component of type BOOT_IMG is found. Querying this component's version
using the MCQI register yields the running and pending fw version of the
HCA.
Querying MCQI for the pending fw version should be done only after
validating that such fw version exists. This is done my checking
'component update state' field in MCQS output.
Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Misc updates from mlx5-next branch:
1) Add the required HW definitions and structures for upcoming TLS
support.
2) Add support for MCQI and MCQS hardware registers for fw version query.
3) Added hardware bits and structures definitions for sub-functions
4) Small code cleanup and improvement for PF pci driver.
5) Bluefield (ECPF) updates and refactoring for better E-Switch
management on ECPF embedded CPU NIC:
5.1) Consolidate querying eswitch number of VFs
5.2) Register event handler at the correct E-Switch init stage
5.3) Setup PF's inline mode and vlan pop when the ECPF is the
E-Swtich manager ( the host PF is basically a VF ).
5.4) Handle Vport UC address changes in switchdev mode.
6) Cleanup the rep and netdev reference when unloading IB rep.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
i# All conflicts fixed but you are still merging.
The following pull-request contains BPF updates for your *net-next* tree.
There is a minor merge conflict in mlx5 due to 8960b38932be ("linux/dim:
Rename externally used net_dim members") which has been pulled into your
tree in the meantime, but resolution seems not that bad ... getting current
bpf-next out now before there's coming more on mlx5. ;) I'm Cc'ing Saeed
just so he's aware of the resolution below:
** First conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c:
... needs the same rename from net_dim_cq_moder into dim_cq_moder.
** Second conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c:
<<<<<<< HEAD
int cpu = cpumask_first(mlx5_comp_irq_get_affinity_mask(priv->mdev, ix));
struct dim_cq_moder icocq_moder = {0, 0};
struct net_device *netdev = priv->netdev;
struct mlx5e_channel *c;
unsigned int irq;
=======
struct net_dim_cq_moder icocq_moder = {0, 0};
>>>>>>> e5a3e259ef239f443951d401db10db7d426c9497
Take the second chunk and rename net_dim_cq_moder into dim_cq_moder
as well.
Let me know if you run into any issues. Anyway, the main changes are:
1) Long-awaited AF_XDP support for mlx5e driver, from Maxim.
2) Addition of two new per-cgroup BPF hooks for getsockopt and
setsockopt along with a new sockopt program type which allows more
fine-grained pass/reject settings for containers. Also add a sock_ops
callback that can be selectively enabled on a per-socket basis and is
executed for every RTT to help tracking TCP statistics, both features
from Stanislav.
3) Follow-up fix from loops in precision tracking which was not propagating
precision marks and as a result verifier assumed that some branches were
not taken and therefore wrongly removed as dead code, from Alexei.
4) Fix BPF cgroup release synchronization race which could lead to a
double-free if a leaf's cgroup_bpf object is released and a new BPF
program is attached to the one of ancestor cgroups in parallel, from Roman.
5) Support for bulking XDP_TX on veth devices which improves performance
in some cases by around 9%, from Toshiaki.
6) Allow for lookups into BPF devmap and improve feedback when calling into
bpf_redirect_map() as lookup is now performed right away in the helper
itself, from Toke.
7) Add support for fq's Earliest Departure Time to the Host Bandwidth
Manager (HBM) sample BPF program, from Lawrence.
8) Various cleanups and minor fixes all over the place from many others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Both MTK_TRGMII_MT7621_CLK and MTK_PATH_BIT are defined as bit 10.
This can causes issues on non-MT7621 devices which has the
MTK_PATH_BIT(MTK_ETH_PATH_GMAC1_RGMII) and MTK_TRGMII capability set.
The wrong TRGMII setup code can be executed. The current wrongly executed
code doesn’t do any harm on MT7623 and the TRGMII setup for the MT7623
SOC side is done in MT7530 driver So it wasn’t noticed in the test.
Move all capability bits in one enum so that they are all unique and easy
to expand in the future.
Because mtk_eth_path enum is merged in to mkt_eth_capabilities, the
variable path value is no longer between 0 to number of paths,
mtk_eth_path_name can’t be used anymore in this form. Convert the
mtk_eth_path_name array to a function to lookup the pathname.
The old code walked thru the mtk_eth_path enum, which is also merged
with mkt_eth_capabilities. Expand array mtk_eth_muxc so it can store the
name and capability bit of the mux. Convert the code so it can walk thru
the mtk_eth_muxc array.
Fixes: 8efaa653a8a5 ("net: ethernet: mediatek: Add MT7621 TRGMII mode support") Signed-off-by: René van Dorst <opensource@vdorst.com>
v1->v2:
- Move all capability bits in one enum, suggested by Willem de Bruijn
- Convert the mtk_eth_path_name array to a function to lookup the pathname
- Expand array mtk_eth_muxc so it can also store the name and capability
bit of the mux
- Updated commit message
Signed-off-by: David S. Miller <davem@davemloft.net>
net: stmmac: Enable dwmac4 jumbo frame more than 8KiB
Enable GMAC v4.xx and beyond to support 16KiB buffer.
Signed-off-by: Weifeng Voon <weifeng.voon@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Bernat [Tue, 2 Jul 2019 17:43:54 +0000 (19:43 +0200)]
bonding: add an option to specify a delay between peer notifications
Currently, gratuitous ARP/ND packets are sent every `miimon'
milliseconds. This commit allows a user to specify a custom delay
through a new option, `peer_notif_delay'.
Like for `updelay' and `downdelay', this delay should be a multiple of
`miimon' to avoid managing an additional work queue. The configuration
logic is copied from `updelay' and `downdelay'. However, the default
value cannot be set using a module parameter: Netlink or sysfs should
be used to configure this feature.
When setting `miimon' to 100 and `peer_notif_delay' to 500, we can
observe the 500 ms delay is respected:
In bond_mii_monitor(), I have tried to keep the lock logic readable.
The change is due to the fact we cannot rely on a notification to
lower the value of `bond->send_peer_notif' as `NETDEV_NOTIFY_PEERS' is
only triggered once every N times, while we need to decrement the
counter each time.
iproute2 also needs to be updated to be able to specify this new
attribute through `ip link'.
Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 4 Jul 2019 12:36:51 +0000 (13:36 +0100)]
net: ethernet: sun: remove redundant assignment to variable err
The variable err is being assigned with a value that is never
read and it is being updated in the next statement with a new value.
The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 3 Jul 2019 16:50:37 +0000 (17:50 +0100)]
gve: fix -ENOMEM null check on a page allocation
Currently the check to see if a page is allocated is incorrect
and is checking if the pointer page is null, not *page as
intended. Fix this.
Addresses-Coverity: ("Dereference before null check") Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 3 Jul 2019 20:51:54 +0000 (13:51 -0700)]
Merge branch 'net-ICW-sendmsg-recvmsg'
Paolo Abeni says:
====================
net: use ICW for sk_proto->{send,recv}msg
This series extends ICW usage to one of the few remaining spots in fast-path
still hitting per packet retpoline overhead, namely the sk_proto->{send,recv}msg
calls.
The first 3 patches in this series refactor the existing code so that applying
the ICW macros is straight-forward: we demux inet_{recv,send}msg in ipv4 and
ipv6 variants so that each of them can easily select the appropriate TCP or UDP
direct call. While at it, a new helper is created to avoid excessive code
duplication, and the current ICWs for inet_{recv,send}msg are adjusted
accordingly.
The last 2 patches really introduce the new ICW use-case, respectively for the
ipv6 and the ipv4 code path.
This gives up to 5% performance improvement under UDP flood, and smaller but
measurable gains for TCP RR workloads.
v1 -> v2:
- drop inet6_{recv,send}msg declaration from header file,
prefer ICW macro instead
- avoid unneeded reclaration for udp_sendmsg, as suggested by Willem
====================
Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 3 Jul 2019 14:06:53 +0000 (16:06 +0200)]
ipv6: provide and use ipv6 specific version for {recv, send}msg
This will simplify indirect call wrapper invocation in the following
patch.
No functional change intended, any - out-of-tree - IPv6 user of
inet_{recv,send}msg can keep using the existing functions.
SCTP code still uses the existing version even for ipv6: as this series
will not add ICW for SCTP, moving to the new helper would not give
any benefit.
The only other in-kernel user of inet_{recv,send}msg is
pvcalls_conn_back_read(), but psvcalls explicitly creates only IPv4 socket,
so no need to update that code path, too.
v1 -> v2: drop inet6_{recv,send}msg declaration from header file,
prefer ICW macro instead
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 3 Jul 2019 14:06:52 +0000 (16:06 +0200)]
inet: factor out inet_send_prepare()
The same code is replicated verbatim in multiple places, and the next
patches will introduce an additional user for it. Factor out a
helper and use it where appropriate. No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Fri, 7 Jun 2019 12:16:58 +0000 (07:16 -0500)]
net/mlx5: Refactor mlx5_esw_query_functions for modularity
Functions change event output data size changes when functions other
than VFs will be enabled in HCA CAP.
With current API, multiple callers needs to align, calculate accurate
size of the output data depending on number on non VF functions enabled
in the device.
Instead of duplicating such math at multiple places, refactor
mlx5_esw_query_functions() to return raw output allocated by itself.
Caller must free the allocated memory using kvfree() as described in the
function comment section.
This hides calcuation within mlx5_esw_query_functions() and provides
simpler API.
Parav Pandit [Fri, 7 Jun 2019 11:44:17 +0000 (06:44 -0500)]
net/mlx5: E-Switch prepare functions change handler to be modular
Eswitch function change handler will service multiple type of events for
VFs and non VF functions update.
Hence, introduce and use the helper function
esw_vfs_changed_event_handler() for handling change in num VFs to improve
the code readability.
Parav Pandit [Wed, 15 May 2019 05:04:27 +0000 (00:04 -0500)]
net/mlx5: Introduce and use mlx5_eswitch_get_total_vports()
Instead MLX5_TOTAL_VPORTS, use mlx5_eswitch_get_total_vports().
mlx5_eswitch_get_total_vports() in subsequent patch accounts for SF
vports as well.
Expanding MLX5_TOTAL_VPORTS macro would require exposing SF internals to
more generic vport.h header file. Such exposure is not desired.
Hence a mlx5_eswitch_get_total_vports() is introduced.
Given that mlx5_eswitch_get_total_vports() API wants to work on const
mlx5_core_dev*, change its helper functions also to accept const *dev.
Colin Ian King [Wed, 3 Jul 2019 08:32:14 +0000 (09:32 +0100)]
qlcnic: remove redundant assignment to variable err
The variable err is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 3 Jul 2019 07:53:58 +0000 (08:53 +0100)]
atl1c: remove redundant assignment to variable tpd_req
The variable tpd_req is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qed: Add support for Timestamping the unicast PTP packets.
This patch adds driver changes to detect/timestamp the unicast PTP packets.
Changes from previous version:
-------------------------------
v2: Defined a macro for unicast ptp param mask.
Please consider applying this to "net-next".
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Catherine Sullivan <csully@google.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dev_init_scheduler() and dev_activate() expect the caller to
hold RTNL. Since we don't want blackhole device to be initialized
per ns, we are initializing at init.
Fixes: 4de83b88c66 ("loopback: create blackhole net device similar to loopack.") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
Yishai Hadas [Sun, 30 Jun 2019 16:23:26 +0000 (19:23 +0300)]
net/mlx5: Report a CQ error event only when a handler was set
Report a CQ error event only when a handler was set.
This enables mlx5_ib to not set a handler upon CQ creation and use some
other mechanism to get this event as of other events by the
mlx5_eq_notifier_register API.
Yishai Hadas [Sun, 30 Jun 2019 16:23:22 +0000 (19:23 +0300)]
net/mlx5: Fix mlx5_core_destroy_cq() error flow
The firmware command to destroy a CQ might fail when the object is
referenced by other object and the ref count is managed by the firmware.
To enable a second successful destruction post the first failure need to
change mlx5_eq_del_cq() to be a void function.
As an error in mlx5_eq_del_cq() is quite fatal from the option to
recover, a debug message inside it should be good enougth and it was
changed to be void.
Daniel Borkmann [Wed, 3 Jul 2019 14:52:03 +0000 (16:52 +0200)]
Merge branch 'bpf-tcp-rtt-hook'
Stanislav Fomichev says:
====================
Congestion control team would like to have a periodic callback to
track some TCP statistics. Let's add a sock_ops callback that can be
selectively enabled on a socket by socket basis and is executed for
every RTT. BPF program frequency can be further controlled by calling
bpf_ktime_get_ns and bailing out early.
I run neper tcp_stream and tcp_rr tests with the sample program
from the last patch and didn't observe any noticeable performance
difference.
v2:
* add a comment about second accept() in selftest (Yonghong Song)
* refer to tcp_bpf.readme in sample program (Yonghong Song)
====================
Suggested-by: Eric Dumazet <edumazet@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf: split shared bpf_tcp_sock and bpf_sock_ops implementation
We've added bpf_tcp_sock member to bpf_sock_ops and don't expect
any new tcp_sock fields in bpf_sock_ops. Let's remove
CONVERT_COMMON_TCP_SOCK_FIELDS so bpf_tcp_sock can be independently
extended.
Adds support for fq's Earliest Departure Time to HBM (Host Bandwidth
Manager). Includes a new BPF program supporting EDT, and also updates
corresponding programs.
It will drop packets with an EDT of more than 500us in the future
unless the packet belongs to a flow with less than 2 packets in flight.
This is done so each flow has at least 2 packets in flight, so they
will not starve, and also to help prevent delayed ACK timeouts.
It will also work with ECN enabled traffic, where the packets will be
CE marked if their EDT is more than 50us in the future.
The table below shows some performance numbers. The flows are back to
back RPCS. One server sending to another, either 2 or 4 flows.
One flow is a 10KB RPC, the rest are 1MB RPCs. When there are more
than one flow of a given RPC size, the numbers represent averages.
The rate limit applies to all flows (they are in the same cgroup).
Tests ending with "-edt" ran with the new BPF program supporting EDT.
Tests ending with "-hbt" ran on top HBT qdisc with the specified rate
(i.e. no HBM). The other tests ran with the HBM BPF program included
in the HBM patch-set.
EDT has limited value when using DCTCP, but it helps in many cases when
using Cubic. It usually achieves larger link utilization and lower
99% latencies for the 1MB RPCs.
HBM ends up queueing a lot of packets with its default parameter values,
reducing the goodput of the 10KB RPCs and increasing their latency. Also,
the RTTs seen by the flows are quite large.
At the head of function, it directly access 'attr' without checking
if it's NULL pointer. This patch moves the values assignment after
validating 'attr' and 'attr->file'.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
GCC8 started emitting warning about using strncpy with number of bytes
exactly equal destination size, which is generally unsafe, as can lead
to non-zero terminated string being copied. Use IFNAMSIZ - 1 as number
of bytes to ensure name is always zero-terminated.
Signed-off-by: Andrii Nakryiko <andriin@fb.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Petr Machata [Tue, 2 Jul 2019 19:06:47 +0000 (19:06 +0000)]
mlxsw: spectrum_ptp: Fix validation in mlxsw_sp1_ptp_packet_finish()
Before mlxsw_sp1_ptp_packet_finish() sends the packet back, it validates
whether the corresponding port is still valid. However the condition is
incorrect: when mlxsw_sp_port == NULL, the code dereferences the port to
compare it to skb->dev.
The condition needs to check whether the port is present and skb->dev still
refers to that port (or else is NULL). If that does not hold, bail out.
Add a pair of parentheses to fix the condition.
Fixes: d92e4e6e33c8 ("mlxsw: spectrum: PTP: Support timestamping on Spectrum-1") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-kernels.git / log