Niklas Söderlund [Thu, 15 Oct 2020 23:14:08 +0000 (01:14 +0200)]
media: rcar-vin: Add support for suspend and resume
Add support for suspend and resume by stopping and starting the video
pipeline while still retaining all buffers given to the driver by
user-space and internally allocated ones, this gives the application a
seamless experience.
Buffers are never returned to user-space unprocessed so user-space don't
notice when suspending. When resuming the driver restarts the capture
session using the internal scratch buffer, this happens before
user-space is unfrozen, this leads to speedy response times once the
application resumes its execution.
As the entire pipeline is stopped on suspend all subdevices in use are
also stopped, and if they enter a shutdown state when not streaming
(such as the R-Car CSI-2 driver) they too will be suspended and resumed
in sync with the VIN driver.
To be able to do keep track of which VINs should be resumed a new
internal state SUSPENDED is added to recode this.
Niklas Söderlund [Thu, 15 Oct 2020 23:14:07 +0000 (01:14 +0200)]
media: rcar-vin: Break out hardware start and stop to new methods
To support suspend and resume the ability to start and stop the hardware
needs to be available internally in the driver. Currently this code is
in the start and stop callbacks of the vb2_ops struct. In these
callbacks the code is intertwined with buffer allocation and freeing.
Prepare for suspend and resume support by breaking out the hardware
start/stop code into new methods.
Niklas Söderlund [Thu, 15 Oct 2020 23:14:05 +0000 (01:14 +0200)]
media: rcar-vin: Remove handling of user-space buffers when stopping
When returning buffers to user-space it's no longer needed to examine
the buffers given to hardware as recent changes guarantees the only
buffer present in the hardware registers when the driver is not in the
running state is the scratch buffer.
Remove the special case and rename the function to better describe it
now only deals with buffers queued to the driver but not yet recorded in
the hardware registers.
Niklas Söderlund [Thu, 15 Oct 2020 23:14:04 +0000 (01:14 +0200)]
media: rcar-vin: Use scratch buffer when not in running state
In its early stages the VIN driver did not use an internal scratch
buffer. This leads to a unnecessary complex start and stop behavior,
specially for TB/BT. The driver now always allocates a scratch buffer to
deal with buffer under-runs, use the scratch buffer to also simplify
starting and stopping.
When capture is starting use the scratch buffer instead of a user-space
buffers while syncing the driver with the hardware state. This allows
the driver to know that no user-space buffer is given to the hardware
before the running state is reached.
When capture is stopping use the scratch buffer instead of leaving the
user-space buffers in place and add a check that all user-space buffers
are processed by the hardware before transitioning from the stopping to
stopped state. This allows the driver to know all user-space buffers
given to the hardware are fully processed.
This change in itself does not improve the driver much but it paves the
way for future simplifications and enhancements. One direct improvement
of this change is that TB/BT buffers returned to user-space while stopping
will always contain both fields, that was not guaranteed before.
Thomas Gleixner [Wed, 14 Oct 2020 15:38:04 +0000 (17:38 +0200)]
media: cx231xx: Consolidate dmesg output
The memory allocations in cx231xx_init_*() happen all in task context with
GFP_KERNEL. Therefore a dev_err() trying to deduce whether this is called
from task or interrupt context is pretty useless.
Remove these historical leftovers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Thomas Gleixner [Tue, 13 Oct 2020 14:26:19 +0000 (16:26 +0200)]
media: au0828: Consolidate dmesg output
The memory allocations in au0828_init_isoc() happen all in task context
with GFP_KERNEL. Therefore a printk() trying to deduce whether this is
called from task or interrupt context is pretty useless.
Convert it to au0828_isocdbg() as the other one in that function and for
completeness sake add one for the URB allocation as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Thomas Gleixner [Tue, 13 Oct 2020 14:26:17 +0000 (16:26 +0200)]
media: Bulk remove BUG_ON(in_interrupt())
None of these BUG_ON()'s is justified. BUG_ON() should only be used when
there is really no way to survive.
If at all these could be replaced by lockdep_assert_preemption_enabled() to
cover all invalid caller context and not just those covered by
in_interrupt().
But all functions which are invoked from those places contain already debug
mechanisms to catch wrong context, so having these extra checks is not
having any advantage.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Yu Kuai [Fri, 9 Oct 2020 12:38:03 +0000 (14:38 +0200)]
media: mtk-vcodec: add missing put_device() call in mtk_vcodec_init_enc_pm()
if of_find_device_by_node() succeed, mtk_vcodec_init_enc_pm() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.
Yu Kuai [Fri, 9 Oct 2020 12:38:01 +0000 (14:38 +0200)]
media: mtk-vcodec: add missing put_device() call in mtk_vcodec_init_dec_pm()
if of_find_device_by_node() succeed, mtk_vcodec_init_dec_pm() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.
Yu Kuai [Fri, 9 Oct 2020 12:37:58 +0000 (14:37 +0200)]
media: platform: add missing put_device() call in mtk_jpeg_clk_init()
if of_find_device_by_node() succeeds, mtk_jpeg_clk_init() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: 648372a87cee ("media: platform: Change the call functions of getting/enable/disable the jpeg's clock") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Lukas Bulwahn [Fri, 9 Oct 2020 04:16:21 +0000 (06:16 +0200)]
media: MAINTAINERS: rectify ZR36067 VIDEO FOR LINUX DRIVER section
Commit 754f0f1ba8d9 ("media: MAINTAINERS: change maintainer of the zoran
driver") added a new section in MAINTAINERS with an invalid file entry
and at the wrong place for alphabetic ordering.
In order to enable -Wimplicit-fallthrough for Clang[1], replace the
existing /* fall through */ comments with the new pseudo-keyword
macro fallthrough[2].
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Thu, 8 Oct 2020 21:12:23 +0000 (23:12 +0200)]
media: tm6000: Fix sizeof() mismatches
The are two instances of sizeof() being used incorrectly. The
sizeof(void *) is incorrect because urb_buffer is a char ** pointer,
fix this by using sizeof(*dev->urb_buffer). The sizeof(dma_addr_t *)
is incorrect, it should be sizeof(*dev->urb_dma), which is a dma_addr_t
and not a dma_addr_t *. This errors did not cause any issues because
it just so happens the sizes are the same.
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes: 16427faf2867 ("[media] tm6000: Add parameter to keep urb bufs allocated") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The ctx->initialized flag is set in __coda_decoder_seq_init,
so it's redundant to set it in coda_dec_seq_init_work.
Remove the redundant set, which allows to simplify the
implementation quite a bit.
This change shouldn't affect functionality as it's just
cosmetics.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Evgeny Novikov [Tue, 6 Oct 2020 17:21:22 +0000 (19:21 +0200)]
media: zr364xx: propagate errors from zr364xx_start_readpipe()
zr364xx_start_readpipe() can fail but callers do not care about that.
This can result in various negative consequences. The patch adds missed
error handling.
Found by Linux Driver Verification project (linuxtesting.org).
Helen Koike [Tue, 20 Oct 2020 19:38:46 +0000 (21:38 +0200)]
media: staging: rkisp1: remove unecessary clocks
aclk_isp_wrap is a child of aclk_isp, and hclk_isp_wrap is a child of
hclk_isp, thus we can remove parents from the list.
Also, for the isp0, we only need the ISP clock, ACLK and HCLK.
In the future we'll need a pixel clock for RK3288 and RK3399, and a JPEG
clock for RK3288.
So with the goal to cleanup the dt-bindings and remove it from staging,
simplify clock names to isp, aclk and hclk.
Assigned clocks are meant to refer to the full path in the clock tree,
i.e. the leaf in the tree.
For instance, in RK3399, the clock responsible for ACLK (ISP AXI CLOCK)
is aclk_isp0_wrapper.
For reference, this is the isp clock topology on RK3399:
Helen Koike [Tue, 20 Oct 2020 19:38:45 +0000 (21:38 +0200)]
media: staging: dt-bindings: rkisp1: drop parent unit address
Fix the following error found with make ARCH=arm64 dt_binding_check:
Documentation/devicetree/bindings/media/rockchip-isp1.example.dts:24.27-101.11:
Warning (unit_address_vs_reg): /example-0/parent@0: node has a unit name, but no reg or ranges property
Reported-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Helen Koike [Tue, 20 Oct 2020 19:38:43 +0000 (21:38 +0200)]
media: staging: dt-bindings: rkisp1: drop i2c unit address
Add missing required items in Rockchip ISP1 dt-bindings example for
a complete i2c node.
Drop unit address to Fix error:
/example-0/parent/i2c@ff160000: node has a unit name, but no reg or ranges property
Remove unecessary fields for the example.
Signed-off-by: Helen Koike <helen.koike@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Helen Koike [Mon, 19 Oct 2020 16:04:34 +0000 (18:04 +0200)]
media: staging: rkisp1: cap: refactor enable/disable stream to allow multistreaming
Allow streaming from self picture path and main picture path at the same
time.
Take care for s_stream() callbacks to not be called twice.
When starting a stream, s_stream(true) shouldn't be called for the isp
and the sensor if the other stream is already enabled (since it was
already called).
When stopping a stream, s_stream(false) shouldn't be called for isp and
the sensor if the other stream is still enabled.
Remove the callback function scheme for navigating through the topology,
simplifying the code, improving readability.
media: staging: rkisp1: remove the 'is_streaming' field from stats and params
The params and stats entities have a field 'is_streaming'.
This field is not needed since the entities can have available
buffers only if they stream and therefore it is enough to
check if there are buffers available.
As a result, their start_stream callbacks can be removed since
they only set the 'is_streaming' field.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: initialize buffer lists only on probe
The buffer lists of stats and params entities
are initialized in queue_setup callback with
'INIT_LIST_HEAD'. It is enough to initialize
the lists only upon registration.
For the stats entity the list is already
initialize upon registration.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: params: in stop_streaming, use list_splice_init to move the buffers
Currently the code uses 'list_cut_position' to move the
buffers to a temporary list. Replace it with
'list_splice_init'. This is nicer since we don't need
to access params.prev. Also, replace INIT_LIST_HEAD
with the simpler LIST_HEAD.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: validate links before powering and streaming
In function rkisp1_vb2_start_streaming, the call to
media_pipeline_start should be the first thing in order
to validate the links and prevents their state from being modified
before power up and streaming.
Adjust stop streaming to the same logic, call media_pipeline_stop
after we disable streaming on the entities in the topology.
Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 2 Oct 2020 14:48:03 +0000 (16:48 +0200)]
media: vivid: fix (partially) timing issues
The vivid driver is a bit flaky w.r.t. the kthread timing, esp. when
running inside a virtual machine.
This is caused by calling schedule_timeout_uninterruptible(1) which can
actually take more than one jiffie. A while loop with schedule() turns out
to be a lot more precise. Also, if mutex_trylock() fails, then just call
schedule() instead of schedule_timeout_uninterruptible(1). There is no need
to wait until the next jiffer, just schedule(), then try to get the lock
again.
This is still not precise enough, it is still relatively easy to get missed
frames. This really should be converted to use a proper timer, but for now
this solves the worst problems.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Fri, 2 Oct 2020 10:16:20 +0000 (12:16 +0200)]
media: zoran: fix spelling mistake and make error message more meaningful
There is a spelling mistake in a pci_err error message. Fix this and
make the error message a little more meaningful.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The description of the V4L2_COLORSPACE_470_SYSTEM_BG stated that it was
superseded by SMPTE 170M. That is incorrect. The probably root cause of
this is that the HDMI standard does not support this colorspace and,
unless otherwise signaled, will fall back to SMPTE 170M for SDTV.
However, EBU Tech. 3321 states that sources should signal Rec. 709 as the
colorimetry when using HDMI since the difference between Rec. 709 and
Tech. 3213 are negligible.
Update the text accordingly.
Also drop a spurious " at the end of the Tech 3213 title in the
bibliography.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: uapi: h264: Add documentation to the interface header
In preparation for making the interface public,
document all the structures. Special care is taken to
annotate those fields that depart from the H264 syntax.
This commit only adds documentation and doesn't affect
functionality in any way.
The mandatory compatible value 'renesas,rcar-gen2-vin' was added to all
Gen2 DTS files in 2017, remove the redundant device specific values from
the driver.
drivers/media/platform/marvell-ccic/mmp-driver.c:324:12: warning: ‘mmpcam_runtime_suspend’ defined but not used [-Wunused-function]
static int mmpcam_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~
drivers/media/platform/marvell-ccic/mmp-driver.c:310:12: warning: ‘mmpcam_runtime_resume’ defined but not used [-Wunused-function]
static int mmpcam_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~
Mark them as __maybe_unused to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:43 +0000 (15:14 +0200)]
media: bttv: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:42 +0000 (15:14 +0200)]
media: exynos4-is: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:41 +0000 (15:14 +0200)]
media: rtl2832: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:40 +0000 (15:14 +0200)]
media: dib0700: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:39 +0000 (15:14 +0200)]
media: dvbsky: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:38 +0000 (15:14 +0200)]
media: au0828: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:37 +0000 (15:14 +0200)]
media: mt2060: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:36 +0000 (15:14 +0200)]
media: radio-sf16fmr2: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:35 +0000 (15:14 +0200)]
media: msp3400: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:34 +0000 (15:14 +0200)]
media: ts2020: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:32 +0000 (15:14 +0200)]
media: pvrusb2: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:31 +0000 (15:14 +0200)]
media: sun4i-csi: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:30 +0000 (15:14 +0200)]
media: s3c-camif: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:29 +0000 (15:14 +0200)]
media: gspca: ov534-ov772x: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:28 +0000 (15:14 +0200)]
media: m88ds3103: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:27 +0000 (15:14 +0200)]
media: saa7134: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:26 +0000 (15:14 +0200)]
media: rtl28xxu: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:25 +0000 (15:14 +0200)]
media: em28xx-audio: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Julia Lawall [Tue, 29 Sep 2020 13:14:24 +0000 (15:14 +0200)]
media: coda: use semicolons rather than commas to separate statements
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Fri, 30 Oct 2020 16:55:29 +0000 (17:55 +0100)]
media: v4l2: remove remaining compat_ioctl
There are no remaining conversions in v4l2_compat_ioctl32(),
so all the infrastructure for it can be removed, with the
only remaining bit being the compat_ioctl32() callback into
drivers that implement their own incompatible data structures.
Arnd Bergmann [Fri, 30 Oct 2020 16:55:27 +0000 (17:55 +0100)]
media: v4l2: convert v4l2_format compat ioctls
Now that the 'clips' array is accessed by common code in the native
ioctl handler, the same can be done for the compat version, greatly
simplifying the compat code for these four ioctl commands.
[hverkuil: fix: CHECK: Alignment should match open parenthesis]
Arnd Bergmann [Fri, 30 Oct 2020 16:55:26 +0000 (17:55 +0100)]
media: v4l2: allocate v4l2_clip objects early
The v4l2_format based ioctls can have an indirect pointer to an array
of v4l2_clip structures for overlay mode, depending on the 'type' member.
There are only five drivers that use the overlay mode and copy the
data through the __user pointer.
Change the five drivers to use memcpy() instead, and copy the data
in common code using the check_array_args() helpers. This allows
for a subsequent patch that use the same mechanism for compat
ioctl handlers.
Note that there is another pointer for a 'bitmap' that is only
used in the 'vivid' driver and nowhere else. There is no easy
way to use the same trick without adding complexity to the
common code, so this remains a __user pointer.
[hverkuil: fix: CHECK: spaces preferred around that '*' (ctx:VxV)]
[hverkuil: fix: CHECK: Alignment should match open parenthesis]
Arnd Bergmann [Fri, 30 Oct 2020 16:55:25 +0000 (17:55 +0100)]
media: v4l2: move compat handling for v4l2_buffer
The ioctl commands based on v4l2_buffer have two sets of compat calls,
one for native time32 structures, and one for compat structures on
64-bit architectures.
Change the compat version to use the same approach as the other simpler
one, for both versions of the structure.
In an earlier version of the patch, I unified the v4l2_buffer_time32
and v4l2_buffer32_time32 compatibility handling into a single
implementation, but that relied on having it all in one file, rather
than having the in_compat_syscall() version in v4l2-compat-ioctl32.c.
Arnd Bergmann [Fri, 30 Oct 2020 16:55:24 +0000 (17:55 +0100)]
media: v4l2: move v4l2_ext_controls conversion
The v4l2_ext_controls ioctl handlers use an indirect pointer to an
incompatible data structure, making the conversion particularly tricky.
Moving the compat implementation to use the new
v4l2_compat_get_user()/v4l2_compat_put_user() helpers makes it
noticeably simpler.
In v4l2_compat_get_array_args()/v4l2_compat_put_array_args(),
the 'file' argument needs to get passed to determine the
exact format, which is a bit unfortunate, as no other conversion
needs these.
[hverkuil: fix: WARNING: Missing a blank line after declarations]
[hverkuil: fix: CHECK: Please don't use multiple blank lines]
These seven commands are all compatible and do not need any
conversion handlers. The existing ones just copy 32-bit
integers around, and those are always compatible.
Arnd Bergmann [Fri, 30 Oct 2020 16:55:22 +0000 (17:55 +0100)]
media: v4l2: prepare compat-ioctl rework
The v4l2-compat-ioctl32() currently takes an extra round trip through user
space pointers when converting the data structure formats. In particular,
this involves using the compat_alloc_user_space() and copy_in_user()
helpers that often lead to worse compat handlers compared to using
in_compat_syscall() checks when copying the data.
The native implementation already gained a simpler method to deal with
the conversion for the time32 conversion. Hook into the same places to
provide a location for reading and writing user space data from inside
of the generic video_usercopy() helper.
Hans Verkuil rewrote the video_get_user() function here to simplify
the zeroing of the extra input fields and fixed a couple of bugs in
the original implementation.
[hverkuil: fix: CHECK: Please don't use multiple blank lines]
Co-developed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Joe Perches [Thu, 22 Oct 2020 02:36:07 +0000 (19:36 -0700)]
treewide: Convert macro and uses of __section(foo) to __section("foo")
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Rasmus Villemoes [Sat, 24 Oct 2020 01:04:26 +0000 (03:04 +0200)]
kernel/sys.c: fix prototype of prctl_get_tid_address()
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace". So
sparse rightfully complains about passing a kernel pointer to
put_user().
Eric Biggers [Fri, 23 Oct 2020 23:27:16 +0000 (16:27 -0700)]
mm: remove kzfree() compatibility definition
Commit 453431a54934 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.
Since then a few more instances of kzfree() have slipped in.
Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 25 Oct 2020 18:28:49 +0000 (11:28 -0700)]
Merge tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A time namespace fix and a matching selftest. The futex absolute
timeouts which are based on CLOCK_MONOTONIC require time namespace
corrected. This was missed in the original time namesapce support"
* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/timens: Add a test for futex()
futex: Adjust absolute futex timeouts with per time namespace offset
Linus Torvalds [Sun, 25 Oct 2020 18:25:16 +0000 (11:25 -0700)]
Merge tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two scheduler fixes:
- A trivial build fix for sched_feat() to compile correctly with
CONFIG_JUMP_LABEL=n
- Replace a zero lenght array with a flexible array"
* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/features: Fix !CONFIG_JUMP_LABEL case
sched: Replace zero-length array with flexible-array
Linus Torvalds [Sun, 25 Oct 2020 18:12:31 +0000 (11:12 -0700)]
Merge tag 'ntb-5.10' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason.
* tag 'ntb-5.10' of git://github.com/jonmason/ntb:
NTB: Use struct_size() helper in devm_kzalloc()
ntb: intel: Fix memleak in intel_ntb_pci_probe
NTB: hw: amd: fix an issue about leak system resources
Linus Torvalds [Sun, 25 Oct 2020 18:10:23 +0000 (11:10 -0700)]
Merge branch 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Regression fix for rc1 and stable kernels as well"
* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
Linus Torvalds [Sun, 25 Oct 2020 18:05:04 +0000 (11:05 -0700)]
Merge tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
"Add support for stat of various special file types (WSL reparse points
for char, block, fifo)"
* tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
smb3: add some missing definitions from MS-FSCC
smb3: remove two unused variables
smb3: add support for stat of WSL reparse points for special file types
Linus Torvalds [Sun, 25 Oct 2020 17:59:34 +0000 (10:59 -0700)]
Merge branch 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc updates from Helge Deller:
- During this merge window O_NONBLOCK was changed to become 000200000,
but we missed that the syscalls timerfd_create(), signalfd4(),
eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict
bit-wise check of the flags parameter.
To provide backward compatibility with existing userspace we
introduce parisc specific wrappers for those syscalls which filter
out the old O_NONBLOCK value and replaces it with the new one.
- Prevent HIL bus driver to get stuck when keyboard or mouse isn't
attached
- Improve error return codes when setting rtc time
- Minor documentation fix in pata_ns87415.c
* 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
ata: pata_ns87415.c: Document support on parisc with superio chip
parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage
hil/parisc: Disable HIL driver when it gets stuck
parisc: Improve error return codes when setting rtc time
Linus Torvalds [Sun, 25 Oct 2020 17:55:35 +0000 (10:55 -0700)]
Merge tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- a series for the Xen pv block drivers adding module parameters for
better control of resource usge
- a cleanup series for the Xen event driver
* tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Documentation: add xen.fifo_events kernel parameter description
xen/events: unmask a fifo event channel only if it was masked
xen/events: only register debug interrupt for 2-level events
xen/events: make struct irq_info private to events_base.c
xen: remove no longer used functions
xen-blkfront: Apply changed parameter name to the document
xen-blkfront: add a parameter for disabling of persistent grants
xen-blkback: add a parameter for disabling of persistent grants
Linus Torvalds [Sun, 25 Oct 2020 17:45:26 +0000 (10:45 -0700)]
Merge tag 'safesetid-5.10' of git://github.com/micah-morton/linux
Pull SafeSetID updates from Micah Morton:
"The changes are mostly contained to within the SafeSetID LSM, with the
exception of a few 1-line changes to change some ns_capable() calls to
ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that
is examined by SafeSetID code and nothing else in the kernel.
The changes to SafeSetID internally allow for setting up GID
transition security policies, as already existed for UIDs"
* tag 'safesetid-5.10' of git://github.com/micah-morton/linux:
LSM: SafeSetID: Fix warnings reported by test bot
LSM: SafeSetID: Add GID security policy handling
LSM: Signal to SafeSetID when setting group IDs
Linus Torvalds [Sun, 25 Oct 2020 17:40:08 +0000 (10:40 -0700)]
Merge tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom
Pull random32 updates from Willy Tarreau:
"Make prandom_u32() less predictable.
This is the cleanup of the latest series of prandom_u32
experimentations consisting in using SipHash instead of Tausworthe to
produce the randoms used by the network stack.
The changes to the files were kept minimal, and the controversial
commit that used to take noise from the fast_pool (f227e3ec3b5c) was
reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is
fed from various sources of activities (networking, scheduling) to
perturb the SipHash state using fast, non-trivially predictable data,
instead of keeping it fully deterministic. The goal is essentially to
make any occasional memory leakage or brute-force attempt useless.
The resulting code was verified to be very slightly faster on x86_64
than what is was with the controversial commit above, though this
remains barely above measurement noise. It was also tested on i386 and
arm, and build- tested only on arm64"
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
* tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom:
random32: add a selftest for the prandom32 code
random32: add noise from network and scheduling activity
random32: make prandom_u32() output unpredictable
Hans de Goede [Wed, 14 Oct 2020 14:41:58 +0000 (16:41 +0200)]
i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler()
before i2c_acpi_register_devices()")'s intention was to only move the
acpi_install_address_space_handler() call to the point before where
the ACPI declared i2c-children of the adapter where instantiated by
i2c_acpi_register_devices().
But i2c_acpi_install_space_handler() had a call to
acpi_walk_dep_device_list() hidden (that is I missed it) at the end
of it, so as an unwanted side-effect now acpi_walk_dep_device_list()
was also being called before i2c_acpi_register_devices().
Move the acpi_walk_dep_device_list() call to the end of
i2c_acpi_register_devices(), so that it is once again called *after*
the i2c_client-s hanging of the adapter have been created.
This fixes the Microsoft Surface Go 2 hanging at boot.
Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627 Reported-by: Rainer Finke <rainer@finke.cc> Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Suggested-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Linus Torvalds [Sat, 24 Oct 2020 19:46:42 +0000 (12:46 -0700)]
Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- rdma error handling fixes (Chao Leng)
- fc error handling and reconnect fixes (James Smart)
- fix the qid displace when tracing ioctl command (Keith Busch)
- don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
- fix MTDT for passthru (Logan Gunthorpe)
- blacklist Write Same on more devices (Kai-Heng Feng)
- fix an uninitialized work struct (zhenwei pi)"
- lightnvm out-of-bounds fix (Colin)
- SG allocation leak fix (Doug)
- rnbd fixes (Gioh, Guoqing, Jack)
- zone error translation fixes (Keith)
- kerneldoc markup fix (Mauro)
- zram lockdep fix (Peter)
- Kill unused io_context members (Yufen)
- NUMA memory allocation cleanup (Xianting)
- NBD config wakeup fix (Xiubo)
* tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits)
block: blk-mq: fix a kernel-doc markup
nvme-fc: shorten reconnect delay if possible for FC
nvme-fc: wait for queues to freeze before calling update_hr_hw_queues
nvme-fc: fix error loop in create_hw_io_queues
nvme-fc: fix io timeout to abort I/O
null_blk: use zone status for max active/open
nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru
nvmet: cleanup nvmet_passthru_map_sg()
nvmet: limit passthru MTDS by BIO_MAX_PAGES
nvmet: fix uninitialized work for zero kato
nvme-pci: disable Write Zeroes on Sandisk Skyhawk
nvme: use queuedata for nvme_req_qid
nvme-rdma: fix crash due to incorrect cqe
nvme-rdma: fix crash when connect rejected
block: remove unused members for io_context
blk-mq: remove the calling of local_memory_node()
zram: Fix __zram_bvec_{read,write}() locking order
skd_main: remove unused including <linux/version.h>
sgl_alloc_order: fix memory leak
lightnvm: fix out-of-bounds write to array devices->info[]
...
Linus Torvalds [Sat, 24 Oct 2020 19:40:18 +0000 (12:40 -0700)]
Merge tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- fsize was missed in previous unification of work flags
- Few fixes cleaning up the flags unification creds cases (Pavel)
- Fix NUMA affinities for completely unplugged/replugged node for io-wq
- Two fallout fixes from the set_fs changes. One local to io_uring, one
for the splice entry point that io_uring uses.
- Linked timeout fixes (Pavel)
- Removal of ->flush() ->files work-around that we don't need anymore
with referenced files (Pavel)
- Various cleanups (Pavel)
* tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block:
splice: change exported internal do_splice() helper to take kernel offset
io_uring: make loop_rw_iter() use original user supplied pointers
io_uring: remove req cancel in ->flush()
io-wq: re-set NUMA node affinities if CPUs come online
io_uring: don't reuse linked_timeout
io_uring: unify fsize with def->work_flags
io_uring: fix racy REQ_F_LINK_TIMEOUT clearing
io_uring: do poll's hash_node init in common code
io_uring: inline io_poll_task_handler()
io_uring: remove extra ->file check in poll prep
io_uring: make cached_cq_overflow non atomic_t
io_uring: inline io_fail_links()
io_uring: kill ref get/drop in personality init
io_uring: flags-based creds init in queue
Linus Torvalds [Sat, 24 Oct 2020 19:26:05 +0000 (12:26 -0700)]
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place (the largest group here is
Christoph's stat cleanups)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove KSTAT_QUERY_FLAGS
fs: remove vfs_stat_set_lookup_flags
fs: move vfs_fstatat out of line
fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat
fs: remove vfs_statx_fd
fs: omfs: use kmemdup() rather than kmalloc+memcpy
[PATCH] reduce boilerplate in fsid handling
fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS
selftests: mount: add nosymfollow tests
Add a "nosymfollow" mount option.
Linus Torvalds [Sat, 24 Oct 2020 19:17:05 +0000 (12:17 -0700)]
Merge tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- document the new dma_{alloc,free}_pages() API
- two fixups for the dma-mapping.h split
* tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: document dma_{alloc,free}_pages
dma-mapping: move more functions to dma-map-ops.h
ARM/sa1111: add a missing include of dma-map-ops.h
Linus Torvalds [Sat, 24 Oct 2020 19:09:22 +0000 (12:09 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Two fixes for this merge window, and an unrelated bugfix for a host
hang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: ioapic: break infinite recursion on lazy EOI
KVM: vmx: rename pi_init to avoid conflict with paride
KVM: x86/mmu: Avoid modulo operator on 64-bit value to fix i386 build
Linus Torvalds [Sat, 24 Oct 2020 18:49:32 +0000 (11:49 -0700)]
Merge tag 'x86_seves_fixes_for_v5.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV-ES fixes from Borislav Petkov:
"Three fixes to SEV-ES to correct setting up the new early pagetable on
5-level paging machines, to always map boot_params and the kernel
cmdline, and disable stack protector for ../compressed/head{32,64}.c.
(Arvind Sankar)"
* tag 'x86_seves_fixes_for_v5.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Explicitly map boot_params and command line
x86/head/64: Disable stack protection for head$(BITS).o
x86/boot/64: Initialize 5-level paging variables earlier
Willy Tarreau [Sat, 24 Oct 2020 16:36:27 +0000 (18:36 +0200)]
random32: add a selftest for the prandom32 code
Given that this code is new, let's add a selftest for it as well.
It doesn't rely on fixed sets, instead it picks 1024 numbers and
verifies that they're not more correlated than desired.
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
Willy Tarreau [Mon, 10 Aug 2020 08:27:42 +0000 (10:27 +0200)]
random32: add noise from network and scheduling activity
With the removal of the interrupt perturbations in previous random32
change (random32: make prandom_u32() output unpredictable), the PRNG
has become 100% deterministic again. While SipHash is expected to be
way more robust against brute force than the previous Tausworthe LFSR,
there's still the risk that whoever has even one temporary access to
the PRNG's internal state is able to predict all subsequent draws till
the next reseed (roughly every minute). This may happen through a side
channel attack or any data leak.
This patch restores the spirit of commit f227e3ec3b5c ("random32: update
the net random state on interrupt and activity") in that it will perturb
the internal PRNG's statee using externally collected noise, except that
it will not pick that noise from the random pool's bits nor upon
interrupt, but will rather combine a few elements along the Tx path
that are collectively hard to predict, such as dev, skb and txq
pointers, packet length and jiffies values. These ones are combined
using a single round of SipHash into a single long variable that is
mixed with the net_rand_state upon each invocation.
The operation was inlined because it produces very small and efficient
code, typically 3 xor, 2 add and 2 rol. The performance was measured
to be the same (even very slightly better) than before the switch to
SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC
(i40e), the connection rate dropped from 556k/s to 555k/s while the
SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps.
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
George Spelvin [Sun, 9 Aug 2020 06:57:44 +0000 (06:57 +0000)]
random32: make prandom_u32() output unpredictable
Non-cryptographic PRNGs may have great statistical properties, but
are usually trivially predictable to someone who knows the algorithm,
given a small sample of their output. An LFSR like prandom_u32() is
particularly simple, even if the sample is widely scattered bits.
It turns out the network stack uses prandom_u32() for some things like
random port numbers which it would prefer are *not* trivially predictable.
Predictability led to a practical DNS spoofing attack. Oops.
This patch replaces the LFSR with a homebrew cryptographic PRNG based
on the SipHash round function, which is in turn seeded with 128 bits
of strong random key. (The authors of SipHash have *not* been consulted
about this abuse of their algorithm.) Speed is prioritized over security;
attacks are rare, while performance is always wanted.
Replacing all callers of prandom_u32() is the quick fix.
Whether to reinstate a weaker PRNG for uses which can tolerate it
is an open question.
Commit f227e3ec3b5c ("random32: update the net random state on interrupt
and activity") was an earlier attempt at a solution. This patch replaces
it.
Reported-by: Amit Klein <aksecurity@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
[ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions
to prandom.h for later use; merged George's prandom_seed() proposal;
inlined siprand_u32(); replaced the net_rand_state[] array with 4
members to fix a build issue; cosmetic cleanups to make checkpatch
happy; fixed RANDOM32_SELFTEST build ] Signed-off-by: Willy Tarreau <w@1wt.eu>