Peter Maydell [Tue, 16 Jun 2015 08:07:22 +0000 (09:07 +0100)]
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20150616' into staging
linux-user patches for 2.4 softfreeze
second spin with ioctl patch refreshed
# gpg: Signature made Tue Jun 16 08:03:14 2015 BST using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20150616:
linux-user: ioctl() command type is int
linux-user: fix the breakpoint inheritance in spawned threads
linux-user: use __get_user and __put_user in cmsg conversions
linux-user: Fix length handling in host_to_target_cmsg
linux-user: Use abi_ulong for TARGET_ELF_PAGESTART
linux-user: Allocate thunk size dynamically
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thierry Bultel [Fri, 12 Jun 2015 09:24:10 +0000 (11:24 +0200)]
linux-user: fix the breakpoint inheritance in spawned threads
When a thread is spawned, cpu_copy re-initializes
the bp & wp lists of current thread, instead of the ones
of the new thread.
The effect is that breakpoints are no longer hit.
Peter Maydell [Tue, 26 May 2015 18:46:32 +0000 (19:46 +0100)]
linux-user: use __get_user and __put_user in cmsg conversions
The target payloads in cmsg conversions may not have the alignment
required by the host. Using the get_user and put_user functions is
the easiest way to handle this and also do the byte-swapping we
require.
(Note that prior to this commit target_to_host_cmsg was incorrectly
using __put_user() rather than __get_user() for the SCM_CREDENTIALS
conversion, which meant it wasn't getting the benefit of the
misalignment handling.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Peter Maydell [Tue, 26 May 2015 18:46:31 +0000 (19:46 +0100)]
linux-user: Fix length handling in host_to_target_cmsg
The previous code for handling payload length when converting
cmsg structures from host to target had a number of problems:
* we required the msg->msg_controllen to declare the buffer
to have enough space for final trailing padding (we were
checking against CMSG_SPACE), whereas the kernel does not
require this, and common userspace code assumes this. (In
particular, glibc's "try to talk to nscd" code that it will
run on startup will receive a cmsg with a 4 byte payload and
only allocate 4 bytes for it, which was causing us to do
the wrong thing on architectures that need 8-alignment.)
* we weren't correctly handling the fact that the SO_TIMESTAMP
payload may be larger for the target than the host
* we weren't marking the messages with MSG_CTRUNC when we did
need to truncate a message that wasn't truncated by the host,
but were instead logging a QEMU message; since truncation is
always the result of a guest giving us an insufficiently
sized buffer, we should report it to the guest as the kernel
does and don't log anything
Rewrite the parts of the function that deal with length to
fix these issues, and add a comment in target_to_host_cmsg
to explain why the overflow logging it does is a QEMU bug,
not a guest issue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Peter Maydell [Mon, 15 Jun 2015 17:43:09 +0000 (18:43 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150615' into staging
target-arm queue:
* Handle "extended small page" descriptors correctly
* Use extended address bits from supersection short descriptors
* Update interrupt status for all cores in gic_update
* Fix off-by-one in exynos4210_fimd bit-swap code
* Remove stray unused 'pending_exception' field
* Add Cortex-A53 KVM support
* Fix reset value of REVIDR
* Add AArch32 MIDR aliases for ARMv8 cores
* MAINTAINERS update for ARM ACPI code
* Trust the kernel's value of MPIDR if we're using KVM
* Various pxa2xx device updates to avoid old APIs
* Mark pxa2xx copro registers as ARM_CP_IO so -icount works
* Correctly UNDEF Thumb2 DSP insns on Cortex-M3
* Initial work towards implementing PMSAv7
* Fix a reset order bug introduced recently
* Correct "preferred return address" for cpreg access exceptions
* Add ACPI SPCR table for the virt board
# gpg: Signature made Mon Jun 15 18:19:34 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150615: (28 commits)
hw/arm/virt-acpi-build: Add SPCR table
ACPI: Add definitions for the SPCR table
target-arm: Correct "preferred return address" for cpreg access exceptions
hw/arm/boot: fix rom_reset notifier registration order
arm: helper: rename get_phys_addr_mpu
arm: Add has-mpu property
arm: Implement uniprocessor with MP config
arm: Refactor get_phys_addr FSR return mechanism
arm: helper: Factor out CP regs common to [pv]msa
arm: Don't add v7mp registers in MPU systems
arm: Do not define TLBTR in PMSA systems
target-arm: Add the THUMB_DSP feature
hw/sd/pxa2xx_mmci: Stop using old_mmio in MemoryRegionOps
hw/arm/pxa2xx: Convert pxa2xx-ssp to VMState
hw/arm/pxa2xx: Add reset method for pxa2xx_ssp
hw/arm/pxa2xx: Convert pxa2xx-fir to QOM and VMState
hw/arm/pxa2xx: Mark coprocessor registers as ARM_CP_IO
target-arm: Use the kernel's idea of MPIDR if we're using KVM
MAINTAINERS: Add myself as ARM ACPI Subsystem maintainer
target-arm: add AArch32 MIDR aliases in ARMv8
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 15 Jun 2015 17:06:11 +0000 (18:06 +0100)]
hw/arm/virt-acpi-build: Add SPCR table
Signed-off-by: Andrew Jones <drjones@redhat.com> Tested-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1433929959-29530-3-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 15 Jun 2015 17:06:11 +0000 (18:06 +0100)]
ACPI: Add definitions for the SPCR table
SPCR is the Serial Port Console Redirection Table. See the document
linked from http://uefi.org/acpi. For serial port types, "Interface
Type", see the documentation for the Debug Port Table 2 (DBG2).
Signed-off-by: Andrew Jones <drjones@redhat.com> Tested-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1433929959-29530-2-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 15 Jun 2015 17:06:11 +0000 (18:06 +0100)]
target-arm: Correct "preferred return address" for cpreg access exceptions
The architecture defines that when taking an exception trying to
access a coprocessor register, the "preferred return address" for
the exception is the address of the instruction that caused the
exception. Correct an off-by-4 error which meant we were returning
the address after the instruction for traps which happened because
of a failure of a runtime access-check function on an AArch32
register. (Traps caused by translate-time checkable permissions
failures had the correct address, as did traps on AArch64 registers.)
This fixes https://bugs.launchpad.net/qemu/+bug/1463338
Reported-by: Robert Buhren <robert@robertbuhren.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1433861440-30133-1-git-send-email-peter.maydell@linaro.org
Eric Auger [Mon, 15 Jun 2015 17:06:11 +0000 (18:06 +0100)]
hw/arm/boot: fix rom_reset notifier registration order
commit ac9d32e39664e060cd1b538ff190980d57ad69e4 had the consequence to
register the do_cpu_reset after the rom_reset one. Hence they get
executed in the wrong order. This commit restores the registration of
do_cpu_reset in arm_load_kernel.
Signed-off-by: Eric Auger <eric.auger@linaro.org> Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434111582-9325-1-git-send-email-eric.auger@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This get_phys_addr is really for pmsav5. Rename it accordingly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: bf4b019aa87d682a45998105ef8e4d4e97a5e117.1434066412.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For processors that support MPUs, add a property to de-feature it. This
is similar to the implementation of the EL3 feature.
The processor definition in init sets ARM_FEATURE_MPU if it can support
an MPU. post_init exposes the property, defaulting to true. If cleared
by the instantiator, ARM_FEATURE_MPU is then removed at realize time.
This is to support R profile processors that may or may-not have an MPU
configured.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 632918cc48786e868ea18aa6bd12f70597994cad.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a boolean for indicating uniprocessors with MP extensions. This
drives the U bit in MPIDR. Prepares support for Cortex-R5.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a70a80583df265e0174f01fa1fc92b33ea6d1db5.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, the return code for get_phys_addr is overloaded for both
success/fail and FSR value return. This doesn't handle the case where
there is an error with a 0 FSR. This case exists in PMSAv7.
So rework get_phys_addr and friends to return a success/failure boolean
return code and populate the FSR via a caller provided uint32_t
pointer.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a209e3d8ae00cda55260c970891f520210e26bad.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
V6+ PMSA and VMSA share some common registers that are currently
in the VMSA definition block. Split them out into a new def that can
be shared to PMSA.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 284db78a43c63c9bfbb60de539672c361bcb6af8.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These registers are VMSA specific so they should be conditional on
VMSA (i.e. !MPU).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7bb8843e45f2635c6b7a583c5bb5da51ed4442a0.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If doing a PMSA (MPU) system do not define the VMSA specific TLBTR CP.
The def is done separately from VMSA registers group as it is affected
by both the OMAP/STRONGARM RW errata and the MIDR backgrounding.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: b03fea3840207edf633f5c9189400c3dd6a28d14.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create an ARM_FEATURE_THUMB_DSP controlling the Thumb encodings of
the 85 DSP instructions (these are all Thumb2). This is enabled for
all non-M-profile CPUs with Thumb2 support, as the instructions are
mandatory for R and A profiles. On M profile they are optional and
not present in the Cortex-M3 (though they are in the M4).
The effect of this commit is that we will now treat the DSP
encodings as illegal instructions on M3, when previously we
incorrectly implemented them.
Signed-off-by: Aurelio C. Remonda <aurelioremonda@gmail.com>
Message-id: 1434311355-26554-1-git-send-email-aurelioremonda@gmail.com
[PMM: added clz/crc32/crc32c and default case to the early-decode switch;
minor format/spacing fixups; reworded commit message a bit] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 15 Jun 2015 17:06:09 +0000 (18:06 +0100)]
hw/sd/pxa2xx_mmci: Stop using old_mmio in MemoryRegionOps
Update the pxa2xx_mmci device to stop using the old_mmio read
and write callbacks in its MemoryRegionOps. This actually
simplifies the code because the separate byte/halfword/word
access functions were all calling into a single function to
do the work anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-6-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 15 Jun 2015 17:06:09 +0000 (18:06 +0100)]
hw/arm/pxa2xx: Convert pxa2xx-ssp to VMState
The pxa2xx-ssp device is already a QOM device but is still
using the old-style register_savevm(); convert to VMState.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-5-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 15 Jun 2015 17:06:09 +0000 (18:06 +0100)]
hw/arm/pxa2xx: Add reset method for pxa2xx_ssp
The pxa2xx_ssp device was missing a reset method; add one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter..crosthwaite@xilinx.com>
Message-id: 1434117989-7367-4-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 15 Jun 2015 17:06:09 +0000 (18:06 +0100)]
hw/arm/pxa2xx: Convert pxa2xx-fir to QOM and VMState
Convert the pxa2xx-fir device to QOM, including using a
VMState for its migration info.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-3-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 15 Jun 2015 17:06:09 +0000 (18:06 +0100)]
hw/arm/pxa2xx: Mark coprocessor registers as ARM_CP_IO
The pxa2xx custom coprocessor registers in cp6 and cp14 do device
accesses, so mark the non-constant regs as ARM_CP_IO so that
icount works correctly and doesn't abort.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-2-git-send-email-peter.maydell@linaro.org
Pavel Fedin [Mon, 15 Jun 2015 17:06:09 +0000 (18:06 +0100)]
target-arm: Use the kernel's idea of MPIDR if we're using KVM
When we're using KVM, the kernel's internal idea of the MPIDR
affinity fields must match the values we tell it for the guest
vcpu cluster configuration in the device tree. Since at the moment
the kernel doesn't support letting userspace tell it the correct
affinity fields to use, we must read the kernel's view and
reflect that back in the device tree.
Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: 02f601d0a1e6$90c7d630$b2578290$@samsung.com
[PMM: Use a local #define rather than a global variable for
the TCG ARM_CPUS_PER_CLUSTER setting. Tweak a comment. Update the
commit message.] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sergey Fedorov [Mon, 15 Jun 2015 17:06:08 +0000 (18:06 +0100)]
target-arm: Fix REVIDR reset value
According to ARM Cortex-A53/A57 TRM, REVIDR reset value should be zero. So let
REVIDR reset value be specified by CPU model and correct it for Cortex-A53/A57.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433321048-23793-2-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shannon Zhao [Mon, 15 Jun 2015 17:06:08 +0000 (18:06 +0100)]
target-arm/kvm64: Add cortex-a53 cpu support
Since commit e353102(target-arm: cpu64: Add support for Cortex-A53) has
added Cortex-A53 cpu support for target-arm, this patch just enables it
for kvm-arm.
Here adding XGENE_POTENZA just makes the enum continuous.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1433207452-4512-2-git-send-email-shannon.zhao@linaro.org
[PMM: Don't add the CPU types to cpus_to_try[]; this array only
lists old CPUs which were supported in pre-PREFERRED_TARGET kernels] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Mon, 15 Jun 2015 17:06:08 +0000 (18:06 +0100)]
target-arm/cpu.h: remove pending_exception
This isn't used by any of the code. In fact it looks like it was never
used as it came in with ARMv7 support.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1434020015-8868-1-git-send-email-alex.bennee@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 15 Jun 2015 17:06:08 +0000 (18:06 +0100)]
hw/display/exynos4210_fimd: Fix bit-swapping code
fimd_swap_data() includes code to reverse the bits in a
64-bit integer, but an off-by-one error meant that it would
try to shift off the top of the integer. Correct the bug
(spotted by Coverity).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1432912615-23107-1-git-send-email-peter.maydell@linaro.org
Johan Karlsson [Mon, 15 Jun 2015 17:06:07 +0000 (18:06 +0100)]
arm_gic: gic_update should always update all cores
This patch fixes so that gic_update always updates all the cores with
new pending irq states. If the function returns early it is possible
to get interrupts that has already been acknowledged.
Signed-off-by: Johan Karlsson <johan.karlsson@enea.com>
[PMM: rebased to apply to current master] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sergey Fedorov [Mon, 15 Jun 2015 17:06:07 +0000 (18:06 +0100)]
target-arm: use extended address bits from supersection short descriptor
Since ARMv7 with LPAE support, a supersection short translation table
descriptor has had extended base address fields which hold bits 39:32 of
translated address. These fields are IMPDEF in ARMv6 and ARMv7 without
LPAE support.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433235718-30485-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 15 Jun 2015 17:06:07 +0000 (18:06 +0100)]
target-arm: Handle "extended small page" descriptors correctly
The old ARMv5-style page table format includes a kind of second level
descriptor named the "extended small page" format, whose primary purpose
is to allow specification of the TEX memory attribute bits on a 4K page.
This exists on ARMv6 and also (as an implementation extension) on XScale
CPUs; it's UNPREDICTABLE on v5.
We were mishandling this in two ways:
(1) we weren't implementing it for v6 (probably never noticed because
Linux will use the new-style v6 page table format there)
(2) we were not correctly setting the page_size, which is 4K, not 1K
The latter bug went unnoticed for years because the only thing which
the page_size affects is which TLB entries get flushed when the guest
does a TLB invalidate on an address in the page, and prior to commit 2f0d8631b7 we were doing a full TLB flush very frequently due to Linux's
habit of writing the SCTLR pointlessly a lot.
(We can assume that after commit 2f0d8631b7 the bug went unnoticed
for a year because nobody's actually using the Zaurus/XScale emulation...)
Report the correct page size for these descriptors, and permit them
on ARMv6 CPUs. This fixes a problem where a kernel image for Zaurus
can boot the kernel OK but gets random segfaults when it tries to
run userspace programs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1432844085-16441-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 15 Jun 2015 15:15:32 +0000 (16:15 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-audio-20150615-1' into staging
audio: remove obsolete backends (esd, fmod, winwave).
audio: stop using global variables, small fixes.
audio: remove some obsolte and unused code.
# gpg: Signature made Mon Jun 15 13:24:44 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-audio-20150615-1:
ossaudio: use trace events instead of debug config flag
alsaaudio: use trace events instead of verbose
dsoundaudio: remove primary buffer
dsoundaudio: remove *_retries kludges
audio: remove plive
audio: remove LOG_TO_MONITOR along with default_mon
MAINTAINERS: remove malc from audio
sdlaudio: do not allow multiple instances
coreaudio: do not use global variables where possible
dsoundaudio: do not use global variables
paaudio: fix possible resource leak
wavaudio: do not use global variables
ossaudio: do not use global variables
alsaaudio: do not use global variables
paaudio: do not use global variables
audio: expose drv_opaque to init_out and init_in
only enable dsound in case the header file is present
audio: remove winwave audio driver
audio: remove fmod backend
audio: remove esd backend
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 15 Jun 2015 12:24:50 +0000 (13:24 +0100)]
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150615' into staging
s390x/kvm/watchdog
1. Implement a diag288 based watchdog
2. Fix virtio-ccw BIOS for gcc >= 4.9
# gpg: Signature made Mon Jun 15 12:36:25 2015 BST using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
* remotes/borntraeger/tags/s390x-20150615:
s390/bios: build with -fdelete-null-pointer-checks
watchdog: Add new Virtual Watchdog action INJECT-NMI
nmi: Implement inject_nmi() for non-monitor context use
s390x/watchdog: diag288 migration support
s390x/kvm: diag288 instruction interception and handling
s390x/watchdog: introduce diag288 watchdog device
watchdog: change option wording to allow for more watchdogs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Aurelien Jarno [Mon, 15 Jun 2015 10:24:03 +0000 (12:24 +0200)]
s390/bios: build with -fdelete-null-pointer-checks
Starting with version 4.9, GCC assumes it can't safely dereference null
pointers, and uses this for some optimizations. On s390, the lowcore
memory is located at address 0, so this assumption is wrong and breaks
the s390-ccw firmware. Pass -fdelete-null-pointer-checks to avoid that.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1434363843-14576-1-git-send-email-aurelien@aurel32.net> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Kővágó, Zoltán [Fri, 12 Jun 2015 12:33:05 +0000 (14:33 +0200)]
dsoundaudio: remove primary buffer
Enabling this option just creates a playback buffer with the specified settings,
and then ignores it. It's probably some outdated hack to set audio formats on
windows. (The first created stream dictates all other streams settings, at least
on some Windows versions). Setting DAC_FIXED_SETTINGS should have the same
effect as setting (the now removed) primary buffer.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Kővágó, Zoltán [Fri, 12 Jun 2015 12:33:04 +0000 (14:33 +0200)]
dsoundaudio: remove *_retries kludges
According to MSDN this may happen when the window is not in the foreground, but
the default is 1 since a long time (which means no retries), so it should be ok.
I've found no problems during testing it on Windows 7 and wine, so this was
probably only the case with some old Windows versions.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Kővágó, Zoltán [Fri, 12 Jun 2015 12:33:02 +0000 (14:33 +0200)]
audio: remove LOG_TO_MONITOR along with default_mon
Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log
to the monitor before it's being initialized), and also nothing else in
qemu logs to the monitor.
This log to monitor feature was the last thing that used the default_mon
variable, so I removed it too (as using it can cause problems).
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Kővágó, Zoltán [Wed, 3 Jun 2015 21:03:47 +0000 (23:03 +0200)]
audio: expose drv_opaque to init_out and init_in
Currently the opaque pointer returned by audio_driver's init is only
exposed to the driver's fini, but not to audio_pcm_ops. This way if
someone wants to share a variable with the driver and the pcm, he must
use global variables. This patch fixes it by adding a third parameter to
audio_pcm_op's init_out and init_in.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Maydell [Mon, 15 Jun 2015 09:43:06 +0000 (10:43 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer core and image format patches
# gpg: Signature made Fri Jun 12 16:08:53 2015 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (25 commits)
block: Fix reopen flag inheritance
block: Add BlockDriverState.inherits_from
block: Add list of children to BlockDriverState
queue.h: Add QLIST_FIX_HEAD_PTR()
block: Drain requests before swapping nodes in bdrv_swap()
block: Move flag inheritance to bdrv_open_inherit()
block: Use QemuOpts in bdrv_open_common()
block: Use macro for cache option names
vmdk: Use bdrv_open_image()
quorum: Use bdrv_open_image()
check-qdict: Test cases for new functions
qdict: Add qdict_{set,copy}_default()
qdict: Add qdict_array_entries()
iotests: Add tests for overriding BDRV_O_PROTOCOL
block: driver should override flags in bdrv_open()
block: Change bitmap truncate conditional to assertion
block: record new size in bdrv_dirty_bitmap_truncate
raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
vmdk: Use vmdk_find_index_in_cluster everywhere
vmdk: Fix index_in_cluster calculation in vmdk_co_get_block_status
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Yongbok Kim [Mon, 20 Apr 2015 15:15:20 +0000 (16:15 +0100)]
linux-user: Use abi_ulong for TARGET_ELF_PAGESTART
TARGET_ELF_PAGESTART is required to use abi_ulong to correctly handle
addresses for different target bits width.
This patch fixes a problem when running a 64-bit user mode application
on 32-bit host machines.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Alexander Graf [Wed, 6 May 2015 21:47:32 +0000 (23:47 +0200)]
linux-user: Allocate thunk size dynamically
We store all struct types in an array of static size without ever
checking whether we overrun it. Of course some day someone (like me
in another, ancient ALSA enabling patch set) will run into the limit
without realizing it.
So let's make the allocation dynamic. We already know the number of
structs that we want to allocate, so we only need to pass the variable
into the respective piece of code.
Also, to ensure we don't accidently overwrite random memory, add some
asserts to sanity check whether a thunk is actually part of our array.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Peter Maydell [Fri, 12 Jun 2015 17:04:14 +0000 (18:04 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Fri Jun 12 15:57:47 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
qemu-iotests: expand test 093 to support group throttling
throttle: Update throttle infrastructure copyright
throttle: add the name of the ThrottleGroup to BlockDeviceInfo
throttle: acquire the ThrottleGroup lock in bdrv_swap()
throttle: Add throttle group support
throttle: Add throttle group infrastructure tests
throttle: Add throttle group infrastructure
throttle: Extract timers from ThrottleState into a separate structure
raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
Revert "iothread: release iothread around aio_poll"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Thu, 9 Apr 2015 16:54:04 +0000 (18:54 +0200)]
block: Fix reopen flag inheritance
When reopening an image, the block layer already takes care to reopen
bs->file as well with recalculated inherited flags. The same must happen
for any other child (most notably missing before this patch: backing
files).
If bs->file (or any other child) didn't originally inherit from bs, e.g.
because it was created separately and then only referenced, it must not
inherit flags on reopen either, so check the inherited_from field before
propagation the reopen down.
VMDK already reopened its extents manually; this code can now be
dropped.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Thu, 9 Apr 2015 16:47:50 +0000 (18:47 +0200)]
block: Add BlockDriverState.inherits_from
Currently, the block layer assumes that any block node can have only one
parent, and if it has a parent, that it inherits some options/flags from
this parent.
This is not true any more: With references used in block device
creation, a single node can be used by multiple parents, or it can be
created separately and not inherit flags from any parent.
To handle reopens correctly, a node must know from which parent it
inherited options. This patch adds the information to BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 8 Apr 2015 11:49:41 +0000 (13:49 +0200)]
block: Add list of children to BlockDriverState
This allows iterating over all children of a given BDS, not only
including bs->file and bs->backing_hd, but also driver-specific
ones like VMDK extents or Quorum children.
For bdrv_swap(), the list of children of the swapped BDS stays at that
BDS (because that's where the pointers stay as well). The list head
moves and pointers to it must be fixed up therefore.
The list of children in the parent of the swapped BDS is not affected by
the swap. The contents of the BDS objects is swapped, so the existing
pointer in the parent automatically points to the newly swapped in BDS.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 10 Jun 2015 11:47:35 +0000 (13:47 +0200)]
queue.h: Add QLIST_FIX_HEAD_PTR()
If the head of a list has been moved to a different memory location, the
le_prev link in the first list entry has to be fixed up. Provide a macro
that implements this fixup.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 10 Jun 2015 11:33:17 +0000 (13:33 +0200)]
block: Drain requests before swapping nodes in bdrv_swap()
bdrv_swap() requires that there are no requests in flight on either of
the two devices. The request coroutine would work on the wrong
BlockDriverState object (with bs->opaque even being interpreted as a
different type potentially) and all sorts of bad things would result
from this.
The currently existing callers mostly ensure that there is no I/O
pending on nodes that are swapped. In detail, this is:
1. Live snapshots. This goes through qmp_transaction(), which calls
bdrv_drain_all() before doing anything. The command is executed
synchronously, so no new I/O can be issued concurrently.
2. snapshot=on in bdrv_open(). We're in the middle of opening the image
(both the original image and its temporary overlay), so there can't
be any I/O in flight yet.
3. Mirroring. bdrv_drain() is already used on the source device so that
the mirror doesn't miss anything. However, the main loop runs between
that and the bdrv_swap() (which is actually a bug, being addressed in
another series), so there is a small window in which new I/O might be
issued that would be in flight during bdrv_swap().
It is safer to just drain the request queue of both devices in
bdrv_swap() instead of relying on callers to do the right thing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 8 Apr 2015 11:43:47 +0000 (13:43 +0200)]
block: Move flag inheritance to bdrv_open_inherit()
Instead of letting every caller of bdrv_open() determine the right flags
for its child node manually and pass them to the function, pass the
parent node and the role of the newly opened child (like backing file,
protocol layer, etc.).
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Tue, 7 Apr 2015 15:12:56 +0000 (17:12 +0200)]
block: Use QemuOpts in bdrv_open_common()
Instead of manually parsing options and then deleting them from the
options QDict, just use QemuOpts like most other places that deal with
block device options.
More options will be added there and then QemuOpts is a lot more
manageable than open-coding everything.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Tue, 7 Apr 2015 14:55:00 +0000 (16:55 +0200)]
block: Use macro for cache option names
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
Kevin Wolf [Tue, 7 Apr 2015 13:35:59 +0000 (15:35 +0200)]
vmdk: Use bdrv_open_image()
Besides standardising on a single interface for opening child nodes,
this patch allows the user to specify options to individual extent
nodes. Overriding file names isn't possible with this yet, so it's of
limited usefulness, but still a step forward.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
Kevin Wolf [Wed, 21 Jan 2015 17:49:28 +0000 (18:49 +0100)]
quorum: Use bdrv_open_image()
Besides standardising on a single interface for opening child nodes,
this simplifies the .bdrv_open() implementation of the quorum block
driver by using block layer functionality for handling BlockdevRefs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
Kevin Wolf [Mon, 19 Jan 2015 20:22:45 +0000 (21:22 +0100)]
qdict: Add qdict_{set,copy}_default()
In the block layer functions that determine options for a child block
device, it's a common pattern to either copy options from the parent's
options or to set a default string if the option isn't explicitly set
yet for the child. Provide convenience functions so that it becomes a
one-liner for each option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Wed, 21 Jan 2015 16:15:44 +0000 (17:15 +0100)]
qdict: Add qdict_array_entries()
This counts the entries in a flattened array in a QDict without
actually splitting the QDict into a QList.
bdrv_open_image() doesn't take a QList, but rather a QDict and a key
prefix string, so this is more convenient for block drivers which have a
dynamically sized list of child nodes (e.g. Quorum) and are to be
converted to using bdrv_open_image() as the standard interface for
opening child nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Peter Maydell [Fri, 12 Jun 2015 14:39:05 +0000 (15:39 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
# gpg: Signature made Fri Jun 12 13:57:20 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/net-pull-request:
qmp/hmp: add rocker device support
rocker: bring link up/down on PHY enable/disable
rocker: update tests using hw-derived interface names
rocker: Add support for phys name
iohandler: Change return type of qemu_set_fd_handler to "void"
event-notifier: Always return 0 for posix implementation
xen_backend: Remove unused error handling of qemu_set_fd_handler
oss: Remove unused error handling of qemu_set_fd_handler
alsaaudio: Remove unused error handling of qemu_set_fd_handler
main-loop: Drop qemu_set_fd_handler2
Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handler
tap: Drop tap_can_send
net/socket: Drop net_socket_can_send
netmap: Drop netmap_can_send
l2tpv3: Drop l2tpv3_can_send
stubs: Add qemu_set_fd_handler
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Max Reitz [Thu, 19 Mar 2015 18:53:17 +0000 (14:53 -0400)]
iotests: Add tests for overriding BDRV_O_PROTOCOL
This adds tests for overriding the qemu-internal BDRV_O_PROTOCOL flag by
explicitly specifying a block driver. As one test must be run over the
NBD protocol while the other must not, this patch adds two separate
iotests.
Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Thu, 19 Mar 2015 18:53:16 +0000 (14:53 -0400)]
block: driver should override flags in bdrv_open()
The BDRV_O_PROTOCOL flag should have an impact only if no driver is
specified explicitly. Therefore, if bdrv_open() is called with an
explicit block driver argument (either through the options QDict or
through the drv parameter) and that block driver is a protocol block
driver, BDRV_O_PROTOCOL should be set; if it is a format block driver,
BDRV_O_PROTOCOL should be unset.
While there was code to unset the flag in case a format block driver
has been selected, it only followed the bdrv_fill_options() function
call whereas the flag in fact needs to be adjusted before it is used
there.
With that change, BDRV_O_PROTOCOL will always be set if the BDS should
be a protocol driver; if the driver has been specified explicitly, the
new code will set it; and bdrv_fill_options() will only "probe" a
protocol driver if BDRV_O_PROTOCOL is set. The probing after
bdrv_fill_options() cannot select a protocol driver.
Thus, bdrv_open_image() to open BDS.file is never called if a protocol
BDS is about to be created. With that change in turn it is impossible to
call bdrv_open_common() with a protocol drv and file != NULL, which
allows us to remove the bdrv_swap() call.
This change breaks a test case in qemu-iotest 051:
"-drive file=t.qcow2,file.driver=qcow2" now works because the explicitly
specified "qcow2" overrides the BDRV_O_PROTOCOL which is automatically
set for the "file" BDS (and the filename is just passed down).
Therefore, this patch removes that test case.
Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
John Snow [Wed, 10 Jun 2015 17:24:54 +0000 (13:24 -0400)]
block: Change bitmap truncate conditional to assertion
This is an artifact of an older version that had both all-bitmap and
single-bitmap truncate functions, and some info got lost in the shuffle.
Bitmaps can only be frozen during a backup operation, and a backup
operation should prevent a resize operation, so just assert that this
cannot happen.
Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
John Snow [Mon, 8 Jun 2015 20:49:15 +0000 (16:49 -0400)]
block: record new size in bdrv_dirty_bitmap_truncate
ce1ffea8 neglected to update the BdrvDirtyBitmap structure
itself for internal consistency. It's currently not an issue,
but for migration and persistence series this will cause headaches.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 9 Jun 2015 08:45:16 +0000 (10:45 +0200)]
raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
Image files with an unaligned image size have a final hole that starts
at EOF, i.e. in the middle of a sector. Currently, *pnum == 0 is
returned when checking the status of this sector. In qemu-img, this
triggers an assertion failure.
In order to fix this, one type for the sector that contains EOF must be
found. Treating a hole as data is safe, so this patch rounds the
calculated number of data sectors up, so that a partial sector at EOF is
treated as a full data sector.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1229394
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Cole Robinson <crobinso@redhat.com>
Max Reitz [Mon, 1 Jun 2015 16:09:19 +0000 (18:09 +0200)]
qcow2: Add DEFAULT_L2_CACHE_CLUSTERS
If a relatively large cluster size is chosen, the default of 1 MB L2
cache is not really appropriate. In this case, unless overridden by the
user, the default cache size should not be determined by its size in
bytes but by the number of L2 tables (clusters) it is supposed to
contain.
Note that without this patch, MIN_L2_CACHE_SIZE will effectively take
over the same role. However, providing space for just two L2 tables is
not enough to be the default.
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 1 Jun 2015 16:09:18 +0000 (18:09 +0200)]
iotests: qcow2 COW with minimal L2 cache size
This adds a test case to test 103 for performing a COW operation in a
qcow2 image using an L2 cache with minimal size (which should be at
least two clusters so the COW can access both source and destination
simultaneously).
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 1 Jun 2015 16:09:17 +0000 (18:09 +0200)]
qcow2: Set MIN_L2_CACHE_SIZE to 2
The L2 cache must cover at least two L2 tables, because during COW two
L2 tables are accessed simultaneously.
Reported-by: Alexander Graf <agraf@suse.de> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Max Reitz <mreitz@redhat.com> Tested-by: Alexander Graf <agraf@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
John Snow [Fri, 22 May 2015 16:01:41 +0000 (12:01 -0400)]
iotests: remove assertIsNotNone call
RHEL6 doesn't have Python 2.7, so replace this call with
assertNotEqual(x, None) which will work just as well.
Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Fri, 12 Jun 2015 13:31:13 +0000 (14:31 +0100)]
Merge remote-tracking branch 'remotes/aurel/tags/pull-sh4-next-20150612' into staging
sh4 linux-user cpu and hwcap
misc optimizations and cleanup
convert r2d to new MMIO accessor style
# gpg: Signature made Fri Jun 12 11:28:43 2015 BST using RSA key ID 1DDD8C9B
# gpg: Good signature from "Aurelien Jarno <aurelien@aurel32.net>"
# gpg: aka "Aurelien Jarno <aurelien@jarno.fr>"
# gpg: aka "Aurelien Jarno <aurel32@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7746 2642 A9EF 94FD 0F77 196D BA9C 7806 1DDD 8C9B
* remotes/aurel/tags/pull-sh4-next-20150612:
target-sh4: remove dead code
target-sh4: factorize fmov implementation
target-sh4: split out Q and M from of SR and optimize div1
target-sh4: optimize negc using add2 and sub2
target-sh4: optimize subc using sub2
target-sh4: optimize addc using add2
target-sh4: Split out T from SR
target-sh4: use bit number for SR constants
sh4/r2d: convert to new MMIO accessor style
linux-user: Add HWCAP for SH4
linux-user: Default sh4 to sh7785
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alberto Garcia [Mon, 8 Jun 2015 16:17:48 +0000 (18:17 +0200)]
qemu-iotests: expand test 093 to support group throttling
This patch improves the test by attaching a different number of drives
to the VM and putting them in the same throttling group. The test
verifies that the I/O is evenly distributed among all members of the
group, and that the limits are enforced.
By default the test is repeated 3 times with 1, 2 and 3 drives, but
the maximum number of simultaneous drives is configurable.
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 513df1da5c658878191b579ebcddd985adcd4122.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 07dcd4ed02f0110b13b3140f477b761b8bb8e270.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alberto Garcia [Mon, 8 Jun 2015 16:17:46 +0000 (18:17 +0200)]
throttle: add the name of the ThrottleGroup to BlockDeviceInfo
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 172df91f09c69c6f0440a697bbd1b3f95b077ee4.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alberto Garcia [Mon, 8 Jun 2015 16:17:45 +0000 (18:17 +0200)]
throttle: acquire the ThrottleGroup lock in bdrv_swap()
bdrv_swap() touches the fields of a BlockDriverState that are
protected by the ThrottleGroup lock. Although those fields end up in
their original place, they are temporarily swapped in the process,
so there's a chance that an operation on a member of the same group
happening on a different thread can try to use them.
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: d92dc40d7c4f1fc5cda5cbbf4ffb7a4670b79d17.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alberto Garcia [Mon, 8 Jun 2015 16:17:44 +0000 (18:17 +0200)]
throttle: Add throttle group support
The throttle group support use a cooperative round robin scheduling
algorithm.
The principles of the algorithm are simple:
- Each BDS of the group is used as a token in a circular way.
- The active BDS computes if a wait must be done and arms the right
timer.
- If a wait must be done the token timer will be armed so the token
will become the next active BDS.
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: f0082a86f3ac01c46170f7eafe2101a92e8fde39.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alberto Garcia [Mon, 8 Jun 2015 16:17:43 +0000 (18:17 +0200)]
throttle: Add throttle group infrastructure tests
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: ba7b9dc7fca43efbb31d5f3aad91a8dbdbea635b.1433779731.git.berto@igalia.com Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alberto Garcia [Mon, 8 Jun 2015 16:17:42 +0000 (18:17 +0200)]
throttle: Add throttle group infrastructure
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 2fdb4de17210b733a13eb472c33cd08b45f8fd21.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 9 Jun 2015 08:55:08 +0000 (10:55 +0200)]
raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
Image files with an unaligned image size have a final hole that starts
at EOF, i.e. in the middle of a sector. Currently, *pnum == 0 is
returned when checking the status of this sector. In qemu-img, this
triggers an assertion failure.
In order to fix this, one type for the sector that contains EOF must be
found. Treating a hole as data is safe, so this patch rounds the
calculated number of data sectors up, so that a partial sector at EOF is
treated as a full data sector.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1229394
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1433840108-9996-1-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In qemu-devel email message <556DBF87.2020908@de.ibm.com>, Christian
Borntraeger writes:
Having many guests all with a kernel/ramdisk (via -kernel) and
several null block devices will result in hangs. All hanging
guests are in partition detection code waiting for an I/O to return
so very early maybe even the first I/O.
Reverting that commit "fixes" the hangs.
Reverting this commit for the 2.4 release. More time is needed to
investigate and correct this patch.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
projects / mirror_qemu.git / log