Rafał Miłecki [Sat, 28 Jan 2017 14:15:42 +0000 (15:15 +0100)]
net: add devm version of alloc_etherdev_mqs function
This patch adds devm_alloc_etherdev_mqs function and devm_alloc_etherdev
macro. These can be used for simpler netdev allocation without having to
care about calling free_netdev.
Thanks to this change drivers, their error paths and removal paths may
get simpler by a bit.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Sat, 28 Jan 2017 00:24:39 +0000 (16:24 -0800)]
tcp: include locally failed retries in retransmission stats
Currently the retransmission stats are not incremented if the
retransmit fails locally. But we always increment the other packet
counters that track total packet/bytes sent. Awkwardly while we
don't count these failed retransmits in RETRANSSEGS, we do count
them in FAILEDRETRANS.
If the qdisc is dropping many packets this could under-estimate
TCP retransmission rate substantially from both SNMP or per-socket
TCP_INFO stats. This patch changes this by always incrementing
retransmission stats on retransmission attempts and failures.
Another motivation is to properly track retransmists in
SCM_TIMESTAMPING_OPT_STATS. Since SCM_TSTAMP_SCHED collection is
triggered in tcp_transmit_skb(), If tp->total_retrans is incremented
after the function, we'll always mis-count by the amount of the
latest retransmission.
Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Sat, 28 Jan 2017 00:24:38 +0000 (16:24 -0800)]
tcp: record pkts sent and retransmistted
Add two stats in SCM_TIMESTAMPING_OPT_STATS:
TCP_NLA_DATA_SEGS_OUT: total data packets sent including retransmission
TCP_NLA_TOTAL_RETRANS: total data packets retransmitted
The names are picked to be consistent with corresponding fields in
TCP_INFO. This allows applications that are using the timestamping
API to measure latency stats to also retrive retransmission rate
of application write.
Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Timur Tabi [Fri, 27 Jan 2017 22:43:48 +0000 (16:43 -0600)]
net: qcom/emac: add an error interrupt handler for the sgmii
The SGMII (internal PHY) can report decode errors via an interrupt. It
can also report autonegotiation status changes, but we don't need to track
those. The SGMII can recover automatically from most decode errors, so
we only reset the interface if we get multiple consecutive errors.
It's possible for bogus decode errors to be reported while the link is
being brought up. The interrupt is registered when the interface is
opened, and it's enabled after the link is up.
Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
The EMAC driver does not support wake-on-lan, but there is still
code left-over that partially enables it. Remove that code and a few
macros that support it.
Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Timur Tabi [Fri, 27 Jan 2017 22:43:44 +0000 (16:43 -0600)]
net: qcom/emac: always use autonegotiation to configure the SGMII link
Regardless of how the external PHY is configured, the internal PHY
(the "SGMII" block) is capable of configuring the SGMII link automatically.
When the external PHY link comes up, regardless of how it is configured,
the SGMII link is configured automatically.
Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Timur Tabi [Fri, 27 Jan 2017 22:43:43 +0000 (16:43 -0600)]
net: qcom/emac: display the phy driver info after we connect
The PHY driver is attached only when the driver calls
phy_connect_direct(). Calling phy_attached_print() to display
information about the PHY driver prior to that point is meaningless.
The interface can be brought down, a new PHY driver can be loaded,
and the interface then brought back up. This is the correct time
to display information about the attached driver.
Since phy_attached_print() also prints information about the
interrupt, that needs to be set as well.
Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
andy zhou [Fri, 27 Jan 2017 21:45:28 +0000 (13:45 -0800)]
openvswitch: Simplify do_execute_actions().
do_execute_actions() implements a worthwhile optimization: in case
an output action is the last action in an action list, skb_clone()
can be avoided by outputing the current skb. However, the
implementation is more complicated than necessary. This patch
simplify this logic.
Signed-off-by: Andy Zhou <azhou@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 29 Jan 2017 23:42:47 +0000 (18:42 -0500)]
Merge branch 'dsa-multi-chip-prep'
Vivien Didelot says:
====================
net: dsa: preparatory patches for multi-chip
In order to introduce support for multi-chip configuration, we need to
do a few enhancements. This patchset makes the number of ports in a
switch dynamic (instead of capping to DSA_MAX_PORTS), stores the switch
and index of a port in the dsa_port structure, uses it in the slave
private structure, and exposes the bridge device a port belongs to.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 27 Jan 2017 20:29:41 +0000 (15:29 -0500)]
net: dsa: pass bridge device when a port leaves
Upon reception of the NETDEV_CHANGEUPPER, a leaving port is already
unbridged, so reflect this by assigning the port's bridge_dev pointer to
NULL before calling the port_bridge_leave DSA driver operation.
Now that the bridge_dev pointer is exposed to the drivers, reflecting
the current state of the DSA switch fabric is necessary for the drivers
to adjust their port based VLANs correctly.
Pass the bridge device pointer to the port_bridge_leave operation so
that drivers have all information to re-program their chips properly,
and do not need to cache it anymore.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 27 Jan 2017 20:29:36 +0000 (15:29 -0500)]
net: dsa: variable number of ports
Change the ports[DSA_MAX_PORTS] array of the dsa_switch structure for a
zero-length array, allocated at the same time as the dsa_switch
structure itself. A dsa_switch_alloc() helper is provided for that.
This commit brings no functional change yet since we pass DSA_MAX_PORTS
as the number of ports for the moment. Future patches can update the DSA
drivers separately to support dynamic number of ports.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
ravb: Support 1Gbps on R-Car H3 ES1.1+ and R-Car M3-W
this series adds support for gigabit communication to the Renesas
EthernetAVB controller when used in conjunction with R-Car Gen3 H3
ES1.1+ and M3-W SoCs. Gigabit is already supported with R-Car Gen 2
SoCs.
The patch from Geert was previously posted for inclusion in v4.10 and
acked by Dave for that purpose. It was, however, not accepted by the
ARM SoC maintainers.
The path from Mizuguchi-san is to address timing problems observed
with gigabit transfers. I would like it considered although my own
testing on M3-W did not show any timing problems.
Changes since v1:
* Address various feedback for "APSR" patch as noted in its changelog
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ravb: Support 1Gbps on R-Car H3 ES1.1+ and R-Car M3-W
The limitation to 10/100Mbit speeds on R-Car Gen3 is valid for R-Car H3
ES1.0 only. Check for the exact SoC model to allow 1Gbps on newer
revisions of R-Car H3, and on R-Car M3-W.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kazuya Mizuguchi [Fri, 27 Jan 2017 19:46:26 +0000 (20:46 +0100)]
ravb: Add tx and rx clock internal delays mode of APSR
This patch enables tx and rx clock internal delay modes (TDM and RDM).
This is to address a failure in the case of 1Gbps communication using the
by salvator-x board with the KSZ9031RNX phy. This has been reported to
occur with both the r8a7795 (H3) and r8a7796 (M3-W) SoCs.
With this change APSR internal delay modes are enabled for
"rgmii-id", "rgmii-rxid" and "rgmii-txid" phy modes as follows:
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 27 Jan 2017 15:06:46 +0000 (15:06 +0000)]
net: ethernet: aquantia: return -ETIME in macro AQ_HW_WAIT_FOR
The macro is returning ETIME which means various checks to see if
the returned err is less than zero never work. I believe a -ETIME
should be returned instead.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 29 Jan 2017 18:54:01 +0000 (13:54 -0500)]
Merge branch 'gtp-simple-improvements'
Andreas Schultz says:
====================
gtp: simple gtp improvements
This is the part of the previous "simple gtp improvements" series
that Pablo indicated should go into net-next.
The rcu_lock removal is small correctness changes. Passing invalid
to user space allows for more standards compliant handling of invalid
tunnels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
1) GTP fixes from Andreas Schultz (missing genl module alias, clear IP
DF on transmit).
2) Netfilter needs to reflect the fwmark when sending resets, from Pau
Espin Pedrol.
3) nftable dump OOPS fix from Liping Zhang.
4) Fix erroneous setting of VIRTIO_NET_HDR_F_DATA_VALID on transmit,
from Rolf Neugebauer.
5) Fix build error of ipt_CLUSTERIP when procfs is disabled, from Arnd
Bergmann.
6) Fix regression in handling of NETIF_F_SG in harmonize_features(),
from Eric Dumazet.
7) Fix RTNL deadlock wrt. lwtunnel module loading, from David Ahern.
8) tcp_fastopen_create_child() needs to setup tp->max_window, from
Alexey Kodanev.
9) Missing kmemdup() failure check in ipv6 segment routing code, from
Eric Dumazet.
10) Don't execute unix_bind() under the bindlock, otherwise we deadlock
with splice. From WANG Cong.
11) ip6_tnl_parse_tlv_enc_lim() potentially reallocates the skb buffer,
therefore callers must reload cached header pointers into that skb.
Fix from Eric Dumazet.
12) Fix various bugs in legacy IRQ fallback handling in alx driver, from
Tobias Regnery.
13) Do not allow lwtunnel drivers to be unloaded while they are
referenced by active instances, from Robert Shearman.
14) Fix truncated PHY LED trigger names, from Geert Uytterhoeven.
15) Fix a few regressions from virtio_net XDP support, from John
Fastabend and Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (102 commits)
ISDN: eicon: silence misleading array-bounds warning
net: phy: micrel: add support for KSZ8795
gtp: fix cross netns recv on gtp socket
gtp: clear DF bit on GTP packet tx
gtp: add genl family modules alias
tcp: don't annotate mark on control socket from tcp_v6_send_response()
ravb: unmap descriptors when freeing rings
virtio_net: reject XDP programs using header adjustment
virtio_net: use dev_kfree_skb for small buffer XDP receive
r8152: check rx after napi is enabled
r8152: re-schedule napi for tx
r8152: avoid start_xmit to schedule napi when napi is disabled
r8152: avoid start_xmit to call napi_schedule during autosuspend
net: dsa: Bring back device detaching in dsa_slave_suspend()
net: phy: leds: Fix truncated LED trigger names
net: phy: leds: Break dependency of phy.h on phy_led_triggers.h
net: phy: leds: Clear phy_num_led_triggers on failure to avoid crash
net-next: ethernet: mediatek: change the compatible string
Documentation: devicetree: change the mediatek ethernet compatible string
bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status().
...
Linus Torvalds [Fri, 27 Jan 2017 20:44:32 +0000 (12:44 -0800)]
Merge tag 'xfs-for-linus-4.10-rc6-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs uodates from Darrick Wong:
"I have some more fixes this week: better input validation, corruption
avoidance, build fixes, memory leak fixes, and a couple from Christoph
to avoid an ENOSPC failure.
Summary:
- Fix race conditions in the CoW code
- Fix some incorrect input validation checks
- Avoid crashing fs by running out of space when freeing inodes
- Fix toctou race wrt whether or not an inode has an attr
- Fix build error on arm
- Fix page refcount corruption when readahead fails
- Don't corrupt userspace in the bmap ioctl"
* tag 'xfs-for-linus-4.10-rc6-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: prevent quotacheck from overloading inode lru
xfs: fix bmv_count confusion w/ shared extents
xfs: clear _XBF_PAGES from buffers when readahead page
xfs: extsize hints are not unlikely in xfs_bmap_btalloc
xfs: remove racy hasattr check from attr ops
xfs: use per-AG reservations for the finobt
xfs: only update mount/resv fields on success in __xfs_ag_resv_init
xfs: verify dirblocklog correctly
xfs: fix COW writeback race
Linus Torvalds [Fri, 27 Jan 2017 20:41:46 +0000 (12:41 -0800)]
Merge branch 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
"Some fixes that we've collected from the list.
We still have one more pending to nail down a regression in lzo
compression, but I wanted to get this batch out the door"
* 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: remove ->{get, set}_acl() from btrfs_dir_ro_inode_operations
Btrfs: disable xattr operations on subvolume directories
Btrfs: remove old tree_root case in btrfs_read_locked_inode()
Btrfs: fix truncate down when no_holes feature is enabled
Btrfs: Fix deadlock between direct IO and fast fsync
btrfs: fix false enospc error when truncating heavily reflinked file
Linus Torvalds [Fri, 27 Jan 2017 20:36:39 +0000 (12:36 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A set of fixes for this series. This contains:
- Set of fixes for the nvme target code
- A revert of patch from this merge window, causing a regression with
WRITE_SAME on iSCSI targets at least.
- A fix for a use-after-free in the new O_DIRECT bdev code.
- Two fixes for the xen-blkfront driver"
* 'for-linus' of git://git.kernel.dk/linux-block:
Revert "sd: remove __data_len hack for WRITE SAME"
nvme-fc: use blk_rq_nr_phys_segments
nvmet-rdma: Fix missing dma sync to nvme data structures
nvmet: Call fatal_error from keep-alive timout expiration
nvmet: cancel fatal error and flush async work before free controller
nvmet: delete controllers deletion upon subsystem release
nvmet_fc: correct logic in disconnect queue LS handling
block: fix use after free in __blkdev_direct_IO
xen-blkfront: correct maximum segment accounting
xen-blkfront: feature flags handling adjustments
Linus Torvalds [Fri, 27 Jan 2017 20:29:30 +0000 (12:29 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Second round of -rc fixes for 4.10.
This -rc cycle has been slow for the rdma subsystem. I had already
sent you the first batch before the Holiday break. After that, we kept
only getting a few here or there. Up until this week, when I got a
drop of 13 to one driver (qedr). So, here's the -rc patches I have. I
currently have none held in reserve, so unless something new comes in,
this is it until the next merge window opens.
Summary:
- series of iw_cxgb4 fixes to make it work with the drain cq API
- one or two patches each to: srp, iser, cxgb3, vmw_pvrdma, umem,
rxe, and ipoib
- one big series (13 patches) for the new qedr driver"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (27 commits)
RDMA/cma: Fix unknown symbol when CONFIG_IPV6 is not enabled
IB/rxe: Prevent from completer to operate on non valid QP
IB/rxe: Fix rxe dev insertion to rxe_dev_list
IB/umem: Release pid in error and ODP flow
RDMA/qedr: Dispatch port active event from qedr_add
RDMA/qedr: Fix and simplify memory leak in PD alloc
RDMA/qedr: Fix RDMA CM loopback
RDMA/qedr: Fix formatting
RDMA/qedr: Mark three functions as static
RDMA/qedr: Don't reset QP when queues aren't flushed
RDMA/qedr: Don't spam dmesg if QP is in error state
RDMA/qedr: Remove CQ spinlock from CM completion handlers
RDMA/qedr: Return max inline data in QP query result
RDMA/qedr: Return success when not changing QP state
RDMA/qedr: Add uapi header qedr-abi.h
RDMA/qedr: Fix MTU returned from QP query
RDMA/core: Add the function ib_mtu_int_to_enum
IB/vmw_pvrdma: Fix incorrect cleanup on pvrdma_pci_probe error path
IB/vmw_pvrdma: Don't leak info from alloc_ucontext
IB/cxgb3: fix misspelling in header guard
...
Linus Torvalds [Fri, 27 Jan 2017 20:25:26 +0000 (12:25 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Another two bug fixes:
- ptrace partial write information leak
- a guest page hinting regression introduced with v4.6"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix cmma unused transfer from pgste into pte
s390/ptrace: Preserve previous registers for short regset write
Linus Torvalds [Fri, 27 Jan 2017 20:17:07 +0000 (12:17 -0800)]
Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"An ARM fix in the Xen SWIOTLB - mainly the translation of physical to
bus addresses was done just a tad too late"
* 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb-xen: update dev_addr after swapping pages
Linus Torvalds [Fri, 27 Jan 2017 20:10:58 +0000 (12:10 -0800)]
Merge tag 'vfio-v4.10-rc6' of git://github.com/awilliam/linux-vfio
Pull VFIO fix from Alex Williamson:
"mdev IOMMU groups are not yet compatible with the powerpc SPAPR IOMMU
backend, detect and fail group attach (Greg Kurz)"
* tag 'vfio-v4.10-rc6' of git://github.com/awilliam/linux-vfio:
vfio/spapr: fail tce_iommu_attach_group() when iommu_data is null
Jens Axboe [Fri, 27 Jan 2017 18:56:06 +0000 (11:56 -0700)]
Merge branch 'stable/for-jens-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus
Konrad writes:
Please pull in your 'for-linus' branch two little fixes for Xen
block front:
One fix is for handling the XEN_PAGE_SIZE != PAGE_SIZE (4KB vs 64KB
on ARM for example) mishandling while the other is fixing
the accounting for the configuration changes.
Linus Torvalds [Fri, 27 Jan 2017 18:29:33 +0000 (10:29 -0800)]
Merge tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a regression on tvp5150 causing failures at input selection and
image glitches
- CEC was moved out of staging for v4.10. Fix some bugs on it while not
too late
- fix a regression on pctv452e caused by VM stack changes
- fix suspend issued with smiapp
- fix a regression on cobalt driver
- fix some warnings and Kconfig issues with some random configs.
* tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] s5k4ecgx: select CRC32 helper
[media] dvb: avoid warning in dvb_net
[media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time
[media] v4l: tvp5150: Fix comment regarding output pin muxing
[media] v4l: tvp5150: Reset device at probe time, not in get/set format handlers
[media] pctv452e: move buffer to heap, no mutex
[media] media/cobalt: use pci_irq_allocate_vectors
[media] cec: fix race between configuring and unconfiguring
[media] cec: move cec_report_phys_addr into cec_config_thread_func
[media] cec: replace cec_report_features by cec_fill_msg_report_features
[media] cec: update log_addr[] before finishing configuration
[media] cec: CEC_MSG_GIVE_FEATURES should abort for CEC version < 2
[media] cec: when canceling a message, don't overwrite old status info
[media] cec: fix report_current_latency
[media] smiapp: Make suspend and resume functions __maybe_unused
[media] smiapp: Implement power-on and power-off sequences without runtime PM
Linus Torvalds [Fri, 27 Jan 2017 18:22:00 +0000 (10:22 -0800)]
Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management fix from Zhang Rui:
"A single revert from a recently introduced problem.
Specifics:
Commit 7611fb68062f ("thermal: thermal_hwmon: Convert to
hwmon_device_register_with_info()"), which was introduced in 4.10-rc5,
uses new hwmon API. But this breaks some soc thermal driver because
the new hwmon API has a strict rule for the hwmon device name. Revert
the offending commit as a quick solution for 4.10"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
Revert "thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()"
Brian Foster [Thu, 26 Jan 2017 21:18:09 +0000 (13:18 -0800)]
xfs: prevent quotacheck from overloading inode lru
Quotacheck runs at mount time in situations where quota accounting must
be recalculated. In doing so, it uses bulkstat to visit every inode in
the filesystem. Historically, every inode processed during quotacheck
was released and immediately tagged for reclaim because quotacheck runs
before the superblock is marked active by the VFS. In other words,
the final iput() lead to an immediate ->destroy_inode() call, which
allowed the XFS background reclaim worker to start reclaiming inodes.
Commit 17c12bcd3 ("xfs: when replaying bmap operations, don't let
unlinked inodes get reaped") marks the XFS superblock active sooner as
part of the mount process to support caching inodes processed during log
recovery. This occurs before quotacheck and thus means all inodes
processed by quotacheck are inserted to the LRU on release. The
s_umount lock is held until the mount has completed and thus prevents
the shrinkers from operating on the sb. This means that quotacheck can
excessively populate the inode LRU and lead to OOM conditions on systems
without sufficient RAM.
Update the quotacheck bulkstat handler to set XFS_IGET_DONTCACHE on
inodes processed by quotacheck. This causes ->drop_inode() to return 1
and in turn causes iput_final() to evict the inode. This preserves the
original quotacheck behavior and prevents it from overloading the LRU
and running out of memory.
CC: stable@vger.kernel.org # v4.9 Reported-by: Martin Svec <martin.svec@zoner.cz> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Eric Dumazet [Fri, 27 Jan 2017 15:11:27 +0000 (07:11 -0800)]
net: adjust skb->truesize in pskb_expand_head()
Slava Shwartsman reported a warning in skb_try_coalesce(), when we
detect skb->truesize is completely wrong.
In his case, issue came from IPv6 reassembly coping with malicious
datagrams, that forced various pskb_may_pull() to reallocate a bigger
skb->head than the one allocated by NIC driver before entering GRO
layer.
Current code does not change skb->truesize, leaving this burden to
callers if they care enough.
Blindly changing skb->truesize in pskb_expand_head() is not
easy, as some producers might track skb->truesize, for example
in xmit path for back pressure feedback (sk->sk_wmem_alloc)
We can detect the cases where it should be safe to change
skb->truesize :
1) skb is not attached to a socket.
2) If it is attached to a socket, destructor is sock_edemux()
My audit gave only two callers doing their own skb->truesize
manipulation.
I had to remove skb parameter in sock_edemux macro when
CONFIG_INET is not set to avoid a compile error.
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Slava Shwartsman <slavash@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 27 Jan 2017 16:59:32 +0000 (11:59 -0500)]
Merge branch 'sfc-encapsulated-filters'
Edward Cree says:
====================
sfc: encapsulated filters
This series adds support for setting up filters for encapsulated traffic on
SFC 8000-series adapters, which recognise VXLAN, GENEVE and NVGRE packets by
parsing packet headers. (VXLAN and GENEVE will only be recognised if the
driver on the primary PF has notified the firmware of relevant UDP ports,
which this driver does not yet do.)
While the driver currently has no way of using these filters for flow
steering, it is nonetheless necessary to insert catch-all (aka 'default')
filters to direct this traffic, similar to the existing unencapsulated uni-
and multi-cast catch-all filters, as otherwise the traffic will be dropped
by the NIC - implementation details of the hardware filtering mean that the
traffic will not get matched on outer MAC address to unencapsulated catch-
all filters. (Yes, this is a mess.)
Although this is, therefore, fixing a bug in the existing driver, it's a bug
which has existed since 8000 series support was added, and the fix involves
quite a big patch with an 'adding features' flavour to it, hence why this is
for net-next rather than net and stable.
v2: move netif_cond_dbg into netdevice.h and its own patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Fri, 27 Jan 2017 15:02:52 +0000 (15:02 +0000)]
sfc: insert catch-all filters for encapsulated traffic
8000 series adapters support filtering VXLAN, NVGRE and GENEVE traffic
based on inner fields, and when the NIC recognises such traffic, it
does not match unencapsulated traffic filters any more. So add catch-
all filters for encapsulated traffic on supporting platforms.
Although recognition of VXLAN and GENEVE is based on UDP ports, and thus
will not occur until the driver (on the primary PF) notifies the
firmware of UDP ports to use, NVGRE will always be recognised, hence
without this patch 8000 series adapters will drop all NVGRE traffic.
Partly based on patches by Jon Cooper <jcooper@solarflare.com>.
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Fri, 27 Jan 2017 15:02:26 +0000 (15:02 +0000)]
net: implement netif_cond_dbg macro
For reporting things that may or may not be serious, depending on some
condition, netif_cond_dbg will check the condition and print the report
at either dbg (if the condition is true) or the specified level.
Suggested-by: Jon Cooper <jcooper@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Cooper [Fri, 27 Jan 2017 15:02:11 +0000 (15:02 +0000)]
sfc: fixes to filter restore handling
If the NIC is switched from full-featured to low-latency, encapsulated
filters are no longer available, and this causes errors. This patch
removes those filters from the filter table on restore.
Also, if filters which are removed by the above, or which we fail to
insert when restoring filters, were UC, MC or broadcast default
filters, invalidate the corresponding vlan->default_filters entry.
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
With some gcc versions, we get a warning about the eicon driver,
and that currently shows up as the only remaining warning in one
of the build bots:
In file included from ../drivers/isdn/hardware/eicon/message.c:30:0:
eicon/message.c: In function 'mixer_notify_update':
eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds]
The code is easily changed to open-code the unusual PUT_WORD() line
causing this to avoid the warning.
this is a pull request of 4 patches for net-next/master.
The first patch by Oliver Hartkopp adds a netlink API to configure the
interface termination of a CAN card. The next two patches are by me and
add a netlink API to query and configure CAN interfaces that only
support fixed bitrates. The last patch by Colin Ian King simplifies the
return path in the softing_cs driver's softingcs_probe() function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 27 Jan 2017 15:39:10 +0000 (10:39 -0500)]
Merge branch 'gtp-fixes'
Andreas Schultz says:
====================
various gtp fixes
I'm sorry for the compile error mess up in the last version.
It's no excuse for not test compiling, but the hunks got lost in
a rebase.
This is the part of the previous "simple gtp improvements" series
that Pablo indicated should go into net.
The addition of the module alias fixes genl family autoloading,
clearing the DF bit fixes a protocol violation in regard to the
specification and the netns comparison fixes a corner case of
cross netns recv.
v2->v3: fix compiler error introduced in rebase
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Schultz [Fri, 27 Jan 2017 09:40:58 +0000 (10:40 +0100)]
gtp: fix cross netns recv on gtp socket
The use of the passed through netlink src_net to check for a
cross netns operation was wrong. Using the GTP socket and the
GTP netdevice is always correct (even if the netdev has been
moved to new netns after link creation).
Remove the now obsolete net field from gtp_dev.
Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Schultz [Fri, 27 Jan 2017 09:40:57 +0000 (10:40 +0100)]
gtp: clear DF bit on GTP packet tx
3GPP TS 29.281 and 3GPP TS 29.060 imply that GTP-U packets should be
sent with the DF bit cleared. For example 3GPP TS 29.060, Release 8,
Section 13.2.2:
> Backbone router: Any router in the backbone may fragment the GTP
> packet if needed, according to IPv4.
Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Harald Welte <laforge@netfilter.org> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Schultz [Fri, 27 Jan 2017 09:40:56 +0000 (10:40 +0100)]
gtp: add genl family modules alias
Auto-load the module when userspace asks for the gtp netlink
family.
Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Harald Welte <laforge@netfilter.org> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira [Thu, 26 Jan 2017 21:56:21 +0000 (22:56 +0100)]
tcp: don't annotate mark on control socket from tcp_v6_send_response()
Unlike ipv4, this control socket is shared by all cpus so we cannot use
it as scratchpad area to annotate the mark that we pass to ip6_xmit().
Add a new parameter to ip6_xmit() to indicate the mark. The SCTP socket
family caches the flowi6 structure in the sctp_transport structure, so
we cannot use to carry the mark unless we later on reset it back, which
I discarded since it looks ugly to me.
Fixes: bf99b4ded5f8 ("tcp: fix mark propagation with fwmark_reflect enabled") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Jia [Thu, 26 Jan 2017 03:59:17 +0000 (16:59 +1300)]
net/ipv6: allow sysctl to change link-local address generation mode
The address generation mode for IPv6 link-local can only be configured
by netlink messages. This patch adds the ability to change the address
generation mode via sysctl.
v1 -> v2
Removed the rtnl lock and switch to use RCU lock to iterate through
the netdev list.
v2 -> v3
Removed the addrgenmode variable from the idev structure and use the
systcl storage for the flag.
Simplifed the logic for sysctl handling by removing the supported
for all operation.
Added support for more types of tunnel interfaces for link-local
address generation.
Based the patches from net-next.
v3 -> v4
Removed unnecessary whitespace changes.
Signed-off-by: Felix Jia <felix.jia@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 26 Jan 2017 22:44:17 +0000 (14:44 -0800)]
net: Fix ndo_setup_tc comment
Commit 16e5cc647173 ("net: rework setup_tc ndo op to consume
general tc operand") changed the ndo_setup_tc() signature, but did not
update the comments in netdevice.h, so do that now.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 27 Jan 2017 02:04:56 +0000 (18:04 -0800)]
Merge tag 'drm-fixes-for-v4.10-rc6-part-two' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This is the main request for rc6, since really the one earlier was the
rc5 one :-)
The main thing are the nouveau specific race fixes for the connector
locking bug we fixed in -next and reverted here as it has quite large
prereqs. These two fixes should solve the problem at that level and we
can fix it properly in 4.11
Otherwise i915 has a bunch of changes, one ABI change for GVT related
stuff, some VC4 leak fixes, one core fence fix and some AMD changes,
oh and one ast hang avoidance fix.
Hoping it calms down around now"
* tag 'drm-fixes-for-v4.10-rc6-part-two' of git://people.freedesktop.org/~airlied/linux: (25 commits)
drm/nouveau: Handle fbcon suspend/resume in seperate worker
drm/nouveau: Don't enabling polling twice on runtime resume
drm/ast: Fixed system hanged if disable P2A
Revert "drm/radeon: always apply pci shutdown callbacks"
drm/i915: reinstate call to trace_i915_vma_bind
drm/i915: Move atomic state free from out of fence release
drm/i915: Check for NULL atomic state in intel_crtc_disable_noatomic()
drm/i915: Fix calculation of rotated x and y offsets for planar formats
drm/i915: Don't init hpd polling for vlv and chv from runtime_suspend()
drm/i915: Don't leak edid in intel_crt_detect_ddc()
drm/i915: Release temporary load-detect state upon switching
drm/i915: prevent crash with .disable_display parameter
drm/i915: Avoid drm_atomic_state_put(NULL) in intel_display_resume
MAINTAINERS: update new mail list for intel gvt driver
drm/i915/gvt: Fix kmem_cache_create() name
drm/i915/gvt/kvmgt: mdev ABI is available_instances, not available_instance
drm/amdgpu: fix unload driver issue for virtual display
drm/amdgpu: check ring being ready before using
drm/vc4: Return -EINVAL on the overflow checks failing.
drm/vc4: Fix an integer overflow in temporary allocation layout.
...
Dave Airlie [Fri, 27 Jan 2017 01:29:44 +0000 (11:29 +1000)]
Merge tag 'drm-intel-fixes-2017-01-26' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
More fixes than I'd like at this stage, but I think the holidays and
conferences have delayed finding and fixing the stuff a bit. Almost all
of them have Fixes: tags, so it's not just random fixes, we can point
fingers at the commits that broke stuff.
There's an ABI fix to GVT from Alex, before we go on an release a kernel
with the wrong attribute name.
* tag 'drm-intel-fixes-2017-01-26' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: reinstate call to trace_i915_vma_bind
drm/i915: Move atomic state free from out of fence release
drm/i915: Check for NULL atomic state in intel_crtc_disable_noatomic()
drm/i915: Fix calculation of rotated x and y offsets for planar formats
drm/i915: Don't init hpd polling for vlv and chv from runtime_suspend()
drm/i915: Don't leak edid in intel_crt_detect_ddc()
drm/i915: Release temporary load-detect state upon switching
drm/i915: prevent crash with .disable_display parameter
drm/i915: Avoid drm_atomic_state_put(NULL) in intel_display_resume
MAINTAINERS: update new mail list for intel gvt driver
drm/i915/gvt: Fix kmem_cache_create() name
drm/i915/gvt/kvmgt: mdev ABI is available_instances, not available_instance
drm/i915/gvt: Fix relocation of shadow bb
drm/i915/gvt: Enable the shadow batch buffer
Linus Torvalds [Fri, 27 Jan 2017 01:27:00 +0000 (17:27 -0800)]
Merge tag 'acpi-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two regressions introduced recently, one by reverting the
problematic commit and one by fixing up locking in the ACPICA core.
Specifics:
- Revert a recent change that added an ACPI video blacklist entry for
HP Pavilion dv6 as it turned to introduce backlight handling
regressions on some systems (Hans de Goede).
- Fix locking in the ACPICA core to avoid deadlocks related to table
loading that were exposed by a recent change in that area (Lv
Zheng)"
* tag 'acpi-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / video: Add force_native quirk for HP Pavilion dv6"
ACPICA: Tables: Fix hidden logic related to acpi_tb_install_standard_table()
Linus Torvalds [Fri, 27 Jan 2017 01:14:17 +0000 (17:14 -0800)]
Merge tag 'pm-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two regressions introduced recently, one by reverting the
problematic commit and one by fixing up the behavior in an overlooked
case.
Specifics:
- Revert the recent change that caused suspend-to-idle to be used as
the default suspend method on systems where it is indicated to be
efficient by the ACPI tables, as that turned out to be premature
and introduced suspend regressions on some systems with missing
power management support in device drivers (Rafael Wysocki).
- Fix up the intel_pstate driver to take changes of the global limits
via sysfs correctly when the performance policy is used which has
been broken by a recent change in it (Srinivas Pandruvada)"
* tag 'pm-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix sysfs limits enforcement for performance policy
Revert "PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag"
Lyude Paul [Thu, 12 Jan 2017 02:25:24 +0000 (21:25 -0500)]
drm/nouveau: Handle fbcon suspend/resume in seperate worker
Resuming from RPM can happen while already holding
dev->mode_config.mutex. This means we can't actually handle fbcon in
any RPM resume workers, since restoring fbcon requires grabbing
dev->mode_config.mutex again. So move the fbcon suspend/resume code into
it's own worker, and rely on that instead to avoid deadlocking.
This fixes more deadlocks for runtime suspending the GPU on the ThinkPad
W541. Reproduction recipe:
- Get a machine with both optimus and a nvidia card with connectors
attached to it
- Wait for the nvidia GPU to suspend
- Attempt to manually reprobe any of the connectors on the nvidia GPU
using sysfs
- *deadlock*
[airlied: use READ_ONCE to address Hans's comment]
Signed-off-by: Lyude <lyude@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Kilian Singer <kilian.singer@quantumtechnology.info> Cc: Lukas Wunner <lukas@wunner.de> Cc: David Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Lyude Paul [Thu, 12 Jan 2017 02:25:23 +0000 (21:25 -0500)]
drm/nouveau: Don't enabling polling twice on runtime resume
As it turns out, on cards that actually have CRTCs on them we're already
calling drm_kms_helper_poll_enable(drm_dev) from
nouveau_display_resume() before we call it in
nouveau_pmops_runtime_resume(). This leads us to accidentally trying to
enable polling twice, which results in a potential deadlock between the
RPM locks and drm_dev->mode_config.mutex if we end up trying to enable
polling the second time while output_poll_execute is running and holding
the mode_config lock. As such, make sure we only enable polling in
nouveau_pmops_runtime_resume() if we need to.
This fixes hangs observed on the ThinkPad W541
Signed-off-by: Lyude <lyude@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Kilian Singer <kilian.singer@quantumtechnology.info> Cc: Lukas Wunner <lukas@wunner.de> Cc: David Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Y.C. Chen [Thu, 26 Jan 2017 01:45:40 +0000 (09:45 +0800)]
drm/ast: Fixed system hanged if disable P2A
The original ast driver will access some BMC configuration through P2A bridge
that can be disabled since AST2300 and after.
It will cause system hanged if P2A bridge is disabled.
Here is the update to fix it.
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 27 Jan 2017 00:33:39 +0000 (10:33 +1000)]
Merge tag 'drm-vc4-fixes-2017-01-23' of https://github.com/anholt/linux into drm-fixes
This pull request brings in a few little error checking fixes and one
slow memory leak fix.
* tag 'drm-vc4-fixes-2017-01-23' of https://github.com/anholt/linux:
drm/vc4: Return -EINVAL on the overflow checks failing.
drm/vc4: Fix an integer overflow in temporary allocation layout.
drm/vc4: fix a bounds check
drm/vc4: Fix memory leak of the CRTC state.
Dave Airlie [Fri, 27 Jan 2017 00:17:43 +0000 (10:17 +1000)]
Merge branch 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Just a few small fixes.
* 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux:
Revert "drm/radeon: always apply pci shutdown callbacks"
drm/amdgpu: fix unload driver issue for virtual display
drm/amdgpu: check ring being ready before using
Dave Airlie [Fri, 27 Jan 2017 00:16:56 +0000 (10:16 +1000)]
Merge tag 'drm-misc-fixes-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Single fence fix.
* tag 'drm-misc-fixes-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc:
drm/fence: fix memory overwrite when setting out_fence fd
Omar Sandoval [Thu, 26 Jan 2017 01:06:39 +0000 (17:06 -0800)]
Btrfs: disable xattr operations on subvolume directories
When you snapshot a subvolume containing a subvolume, you get a
placeholder directory where the subvolume would be. These directory
inodes have ->i_ops set to btrfs_dir_ro_inode_operations. Previously,
these i_ops didn't include the xattr operation callbacks. The conversion
to xattr_handlers missed this case, leading to bogus attempts to set
xattrs on these inodes. This manifested itself as failures when running
delayed inodes.
To fix this, clear IOP_XATTR in ->i_opflags on these inodes.
Fixes: 6c6ef9f26e59 ("xattr: Stop calling {get,set,remove}xattr inode operations") Cc: Andreas Gruenbacher <agruenba@redhat.com> Reported-by: Chris Murphy <lists@colorremedies.com> Tested-by: Chris Murphy <lists@colorremedies.com> Cc: <stable@vger.kernel.org> # 4.9.x Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Omar Sandoval [Thu, 26 Jan 2017 01:06:38 +0000 (17:06 -0800)]
Btrfs: remove old tree_root case in btrfs_read_locked_inode()
As Jeff explained in c2951f32d36c ("btrfs: remove old tree_root dirent
processing in btrfs_real_readdir()"), supporting this old format is no
longer necessary since the Btrfs magic number has been updated since we
changed to the current format. There are other places where we still
handle this old format, but since this is part of a fix that is going to
stable, I'm only removing this one for now.
Cc: <stable@vger.kernel.org> # 4.9.x Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Kazuya Mizuguchi [Thu, 26 Jan 2017 13:29:27 +0000 (14:29 +0100)]
ravb: unmap descriptors when freeing rings
"swiotlb buffer is full" errors occur after repeated initialisation of a
device - f.e. suspend/resume or ip link set up/down. This is because memory
mapped using dma_map_single() in ravb_ring_format() and ravb_start_xmit()
is not released. Resolve this problem by unmapping descriptors when
freeing rings.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[simon: reworked] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This happens when the loopback device is set down and a ipv6 fib route
dump is requested.
ip6_null_entry is the root of all ipv6 fib tables making it integrated
into the table and hence passed to the ipv6 route dump code. The
null_entry route uses the loopback device for dst.dev but may not have
rt6i_idev set because of the order in which initializations are done --
ip6_route_net_init is run before addrconf_init has initialized the
loopback device. Fixing the initialization order is a much bigger problem
with no obvious solution thus far.
The BUG is triggered when the loopback is set down and the netif_running
check added by a1a22c1206 fails. The fill_node descends to checking
rt->rt6i_idev for ignore_routes_with_linkdown and since rt6i_idev is
NULL it faults.
The null_entry route should not be processed in a dump request. Catch
and ignore. This check is done in rt6_dump_route as it is the highest
place in the callchain with knowledge of both the route and the network
namespace.
Fixes: a1a22c1206("net: ipv6: Keep nexthop of multipath route on admin down") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 26 Jan 2017 22:08:36 +0000 (14:08 -0800)]
net: ipv6: remove skb_reserve in getroute
Remove skb_reserve and skb_reset_mac_header from inet6_rtm_getroute. The
allocated skb is not passed through the routing engine (like it is for
IPv4) and has not since the beginning of git time.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch series extracts the 4 patches of the larger: net: dsa: Support for
pdata in dsa2 while we wait for feedback from Greg KH on the device references.
Changes in v2:
- rebased properly after the multi-MDIO bus support added to mv88e6xxx
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 26 Jan 2017 18:45:54 +0000 (10:45 -0800)]
net: dsa: Move ports assignment closer to error checking
Move the assignment of ports in _dsa_register_switch() closer to where
it is checked, no functional change. Re-order declarations to be
preserve the inverted christmas tree style.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 26 Jan 2017 18:45:52 +0000 (10:45 -0800)]
net: dsa: Make most functions take a dsa_port argument
In preparation for allowing platform data, and therefore no valid
device_node pointer, make most DSA functions takes a pointer to a
dsa_port structure whenever possible. While at it, introduce a
dsa_port_is_valid() helper function which checks whether port->dn is
NULL or not at the moment.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 26 Jan 2017 18:45:51 +0000 (10:45 -0800)]
net: dsa: Pass device pointer to dsa_register_switch
In preparation for allowing dsa_register_switch() to be supplied with
device/platform data, pass down a struct device pointer instead of a
struct device_node.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 26 Jan 2017 19:31:08 +0000 (14:31 -0500)]
Merge tag 'batadv-next-for-davem-20170126' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- ignore self-generated loop detect MAC addresses in translation table,
by Simon Wunderlich
- install uapi batman_adv.h header, by Sven Eckelmann
- bump copyright years, by Sven Eckelmann
- Remove an unused variable in translation table code, by Sven Eckelmann
- Handle NET_XMIT_CN like NET_XMIT_SUCCESS (revised according to Davids
suggestion), and a follow up code clean up, by Gao Feng (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 25 Jan 2017 22:15:53 +0000 (23:15 +0100)]
ISDN: eicon: reduce stack size of sig_ind function
I noticed that this function uses a lot of kernel stack when the
"latent entropy" plugin is enabled:
drivers/isdn/hardware/eicon/message.c: In function 'sig_ind':
drivers/isdn/hardware/eicon/message.c:6113:1: error: the frame size of 1168 bytes is larger than 1152 bytes [-Werror=frame-larger-than=]
We currently don't warn about this, as we raise the warning limit
to 2048 bytes in mainline, but I'd like to lower that limit again
in the future, and this function can easily be changed to be more
efficient and avoid that warning, by making some of its local
variables 'const'.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
The following patchset contains a large batch with Netfilter fixes for
your net tree, they are:
1) Two patches to solve conntrack garbage collector cpu hogging, one to
remove GC_MAX_EVICTS and another to look at the ratio (scanned entries
vs. evicted entries) to make a decision on whether to reduce or not
the scanning interval. From Florian Westphal.
2) Two patches to fix incorrect set element counting if NLM_F_EXCL is
is not set. Moreover, don't decrenent set->nelems from abort patch
if -ENFILE which leaks a spare slot in the set. This includes a
patch to deconstify the set walk callback to update set->ndeact.
3) Two fixes for the fwmark_reflect sysctl feature: Propagate mark to
reply packets both from nf_reject and local stack, from Pau Espin Pedrol.
4) Fix incorrect handling of loopback traffic in rpfilter and nf_tables
fib expression, from Liping Zhang.
5) Fix oops on stateful objects netlink dump, when no filter is specified.
Also from Liping Zhang.
6) Fix a build error if proc is not available in ipt_CLUSTERIP, related
to fix that was applied in the previous batch for net. From Arnd Bergmann.
7) Fix lack of string validation in table, chain, set and stateful
object names in nf_tables, from Liping Zhang. Moreover, restrict
maximum log prefix length to 127 bytes, otherwise explicitly bail
out.
8) Two patches to fix spelling and typos in nf_tables uapi header file
and Kconfig, patches from Alexander Alemayhu and William Breathitt Gray.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Darrick J. Wong [Thu, 26 Jan 2017 17:50:30 +0000 (09:50 -0800)]
xfs: fix bmv_count confusion w/ shared extents
In a bmapx call, bmv_count is the total size of the array, including the
zeroth element that userspace uses to supply the search key. The output
array starts at offset 1 so that we can set up the user for the next
invocation. Since we now can split an extent into multiple bmap records
due to shared/unshared status, we have to be careful that we don't
overflow the output array.
In the original patch f86f403794b ("xfs: teach get_bmapx about shared
extents and the CoW fork") I used cur_ext (the output index) to check
for overflows, albeit with an off-by-one error. Since nexleft no longer
describes the number of unfilled slots in the output, we can rip all
that out and use cur_ext for the overflow check directly.
Failure to do this causes heap corruption in bmapx callers such as
xfs_io and xfs_scrub. xfs/328 can reproduce this problem.
Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Linus Torvalds [Thu, 26 Jan 2017 17:08:49 +0000 (09:08 -0800)]
Merge tag 'pinctrl-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"A bunch of pin control fixes for v4.10 that didn't get sent off until
now, sorry for the delay.
It's only driver fixes:
- A bunch of fixes to the Intel drivers: broxton, baytrail. Bugs
related to register offsets, IRQ, debounce functionality.
- Fix a conflict amongst UART settings on the meson.
- Fix the ethernet setting on the Uniphier.
- A compilation warning squelched"
* tag 'pinctrl-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: uniphier: fix Ethernet (RMII) pin-mux setting for LD20
pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM
pinctrl: amd: avoid maybe-uninitalized warning
pinctrl: baytrail: Do not add all GPIOs to IRQ domain
pinctrl: baytrail: Rectify debounce support
pinctrl: intel: Set pin direction properly
pinctrl: broxton: Use correct PADCFGLOCK offset
Bart Van Assche [Wed, 25 Jan 2017 21:43:56 +0000 (13:43 -0800)]
Revert "sd: remove __data_len hack for WRITE SAME"
This patch reverts commit f80de881d8df and avoids that sending a
WRITE SAME command to the iSCSI initiator triggers the following:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000014
TARGET_CORE[iSCSI]: Expected Transfer Length: 260096 does not match SCSI CDB Length: 512 for SAM Opcode: 0x41
IP: iscsi_tcp_segment_done+0x20b/0x310 [libiscsi_tcp]
Linus Torvalds [Thu, 26 Jan 2017 16:55:33 +0000 (08:55 -0800)]
Merge tag 'drm-fixes-for-v4.10-rc6-revert-one' of git://people.freedesktop.org/~airlied/linux
Pull drm revert from Dave Airlie:
"Revert one patch missing some prereqs.
One of the connector fixes was missing some prereqs, we have an
alternate driver fix that should work that I'll send tomorrow.
Today is a holiday here so quickly smashing this out"
Daniel Vetter explains:
"I pushed a locking change to fix a nouveau rpm issue to -fixes that
needed the connector_list rework. And that's only in -next, but I
missed that. Dave has the revert in a pull, and he'll follow-up with
the hack nouveau patch for 4.10, and then we'll reapply the proper fix
again for -next and revert the hacks. A bit a mess, but should be
sorted soon"
* tag 'drm-fixes-for-v4.10-rc6-revert-one' of git://people.freedesktop.org/~airlied/linux:
Revert "drm/probe-helpers: Drop locking from poll_enable"
projects / mirror_ubuntu-eoan-kernel.git / log