]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/log
mirror_ubuntu-eoan-kernel.git
9 years agonet: ethernet: cpsw: don't requests IRQs we don't use
Felipe Balbi [Fri, 16 Jan 2015 16:11:12 +0000 (10:11 -0600)]
net: ethernet: cpsw: don't requests IRQs we don't use

CPSW never uses RX_THRESHOLD or MISC interrupts. In
fact, they are always kept masked in their appropriate
IRQ Enable register.

Instead of allocating an IRQ that never fires, it's best
to remove that code altogether and let future patches
implement it if anybody needs those.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: ethernet: cpsw: unroll IRQ request loop
Felipe Balbi [Fri, 16 Jan 2015 16:11:11 +0000 (10:11 -0600)]
net: ethernet: cpsw: unroll IRQ request loop

This patch is in preparation for a nicer IRQ
handling scheme where we use different IRQ
handlers for each IRQ line (as it should be).

Later, we will also drop IRQs offset 0 and 3
because they are always disabled in this driver.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonetlink: make nlmsg_end() and genlmsg_end() void
Johannes Berg [Fri, 16 Jan 2015 21:09:00 +0000 (22:09 +0100)]
netlink: make nlmsg_end() and genlmsg_end() void

Contrary to common expectations for an "int" return, these functions
return only a positive value -- if used correctly they cannot even
return 0 because the message header will necessarily be in the skb.

This makes the very common pattern of

  if (genlmsg_end(...) < 0) { ... }

be a whole bunch of dead code. Many places also simply do

  return nlmsg_end(...);

and the caller is expected to deal with it.

This also commonly (at least for me) causes errors, because it is very
common to write

  if (my_function(...))
    /* error condition */

and if my_function() does "return nlmsg_end()" this is of course wrong.

Additionally, there's not a single place in the kernel that actually
needs the message length returned, and if anyone needs it later then
it'll be very easy to just use skb->len there.

Remove this, and make the functions void. This removes a bunch of dead
code as described above. The patch adds lines because I did

- return nlmsg_end(...);
+ nlmsg_end(...);
+ return 0;

I could have preserved all the function's return values by returning
skb->len, but instead I've audited all the places calling the affected
functions and found that none cared. A few places actually compared
the return value with <= 0 in dump functionality, but that could just
be changed to < 0 with no change in behaviour, so I opted for the more
efficient version.

One instance of the error I've made numerous times now is also present
in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't
check for <0 or <=0 and thus broke out of the loop every single time.
I've preserved this since it will (I think) have caused the messages to
userspace to be formatted differently with just a single message for
every SKB returned to userspace. It's possible that this isn't needed
for the tools that actually use this, but I don't even know what they
are so couldn't test that changing this behaviour would be acceptable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoatm: remove deprecated use of pci api
chas williams - CONTRACTOR [Fri, 16 Jan 2015 13:57:21 +0000 (08:57 -0500)]
atm: remove deprecated use of pci api

Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoDrivers: Isdn: sc: Fixed coding style & spelling mistakes.
Akash Shende [Fri, 16 Jan 2015 13:42:42 +0000 (19:12 +0530)]
Drivers: Isdn: sc: Fixed coding style & spelling mistakes.

Fix some spelling mistakes, coding style and don't assign value to static var.

Signed-off-by: Akash Shende <akash0x53s@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotipc: fix socket list regression in new nl api
Richard Alpe [Fri, 16 Jan 2015 11:30:40 +0000 (12:30 +0100)]
tipc: fix socket list regression in new nl api

Commit 07f6c4bc (tipc: convert tipc reference table to use generic
rhashtable) introduced a problem with port listing in the new netlink
API. It broke the resume functionality resulting in a never ending
loop. This was caused by starting with the first hash table every time
subsequently never returning an empty skb (terminating).

This patch fixes the resume mechanism by keeping a logical reference
to the last hash table along with a logical reference to the socket
(port) that didn't fit in the previous message.

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetoot...
David S. Miller [Sun, 18 Jan 2015 05:25:30 +0000 (00:25 -0500)]
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-01-16

Here are some more bluetooth & ieee802154 patches intended for 3.20:

 - Refactoring & cleanups of ieee802154 & 6lowpan code
 - Various fixes to the btmrvl driver
 - Fixes for Bluetooth Low Energy Privacy feature handling
 - Added build-time sanity checks for sockaddr sizes
 - Fixes for Security Manager registration on LE-only controllers
 - Refactoring of broken inquiry mode handling to a generic quirk

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: replace br_fdb_external_learn_* calls with switchdev notifier events
Jiri Pirko [Thu, 15 Jan 2015 22:49:37 +0000 (23:49 +0100)]
net: replace br_fdb_external_learn_* calls with switchdev notifier events

This patch benefits from newly introduced switchdev notifier and uses it
to propagate fdb learn events from rocker driver to bridge. That avoids
direct function calls and possible use by other listeners (ovs).

Suggested-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoswitchdev: introduce switchdev notifier
Jiri Pirko [Thu, 15 Jan 2015 22:49:36 +0000 (23:49 +0100)]
switchdev: introduce switchdev notifier

This patch introduces new notifier for purposes of exposing events which happen
on switch driver side. The consumers of the event messages are mainly involved
masters, namely bridge and ovs.

Suggested-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoniu: remove one compound_head() call
Eric Dumazet [Fri, 16 Jan 2015 13:39:30 +0000 (05:39 -0800)]
niu: remove one compound_head() call

After a "page = alloc_page(mask);", we do not need to use
compound_head() : page already points to the right place.

This would be true even if using alloc_pages().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosocket: use ki_nbytes instead of iov_length()
Nicolas Dichtel [Fri, 16 Jan 2015 13:35:09 +0000 (14:35 +0100)]
socket: use ki_nbytes instead of iov_length()

This field already contains the length of the iovec, no need to calculate it
again.

Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 's390-next'
David S. Miller [Sun, 18 Jan 2015 04:55:04 +0000 (23:55 -0500)]
Merge branch 's390-next'

Ursula Braun says:

====================
s390: network patches for net-next

here are some s390 related patches for net-next
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoqeth: Remove unneeded structure member
Thomas Richter [Fri, 16 Jan 2015 13:05:49 +0000 (14:05 +0100)]
qeth: Remove unneeded structure member

The member irq_tasklet in the qeth_channel structure
is not referenced anymore and is removed from the
structure.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoqeth: sysfs: replace strcmp() with sysfs_streq()
Eugene Crosser [Fri, 16 Jan 2015 13:05:48 +0000 (14:05 +0100)]
qeth: sysfs: replace strcmp() with sysfs_streq()

Replace combination of strsep() and a temporary char *
followed by a series of "if (!strcmp(...))" with a series
of "if (sysfs_streq(...))".

Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reviewed-by: Thomas-Mich Richter <tmricht@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoqeth: use qeth_card_hw_is_reachable() everywhere
Eugene Crosser [Fri, 16 Jan 2015 13:05:47 +0000 (14:05 +0100)]
qeth: use qeth_card_hw_is_reachable() everywhere

qeth_card_hw_is_reachable() was introduced as part of a new
functionality, but it is a useful abstraction that can replace
verbose checks througout the rest of the `qeth` driver.

Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reviewed-by: Thomas-Mich Richter <tmricht@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agos390/net: Delete useless checks before function calls
Markus Elfring [Fri, 16 Jan 2015 13:05:46 +0000 (14:05 +0100)]
s390/net: Delete useless checks before function calls

The function debug_unregister() tests whether its argument is
NULL and then returns immediately. Thus the test around the call
is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agos390/ctcm, netiucv: migrate variables to handle y2038 problem
Aya Mahfouz [Fri, 16 Jan 2015 13:05:45 +0000 (14:05 +0100)]
s390/ctcm, netiucv: migrate variables to handle y2038 problem

This patch is concerned with migrating the time variables for the s390
network drivers. The changes handle the y2038 problem where timespec will
overflow in the year 2038. timespec was replaced by unsigned long and
all time variables get their values from the jiffies global variable.
This was done for the sake of speed and efficiency.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotc: cls_bpf: rename bpf_len to bpf_num_ops
Jiri Pirko [Thu, 15 Jan 2015 08:52:40 +0000 (09:52 +0100)]
tc: cls_bpf: rename bpf_len to bpf_num_ops

It was suggested by DaveM to change the name as "len" might indicate
unit bytes.

Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotc: add BPF based action
Jiri Pirko [Thu, 15 Jan 2015 08:52:39 +0000 (09:52 +0100)]
tc: add BPF based action

This action provides a possibility to exec custom BPF code.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobridge: fix setlink/dellink notifications
Roopa Prabhu [Thu, 15 Jan 2015 04:02:25 +0000 (20:02 -0800)]
bridge: fix setlink/dellink notifications

problems with bridge getlink/setlink notifications today:
        - bridge setlink generates two notifications to userspace
                - one from the bridge driver
                - one from rtnetlink.c (rtnl_bridge_notify)
        - dellink generates one notification from rtnetlink.c. Which
means bridge setlink and dellink notifications are not
consistent

        - Looking at the code it appears,
If both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF were set,
        the size calculation in rtnl_bridge_notify can be wrong.
        Example: if you set both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF
        in a setlink request to rocker dev, rtnl_bridge_notify will
allocate skb for one set of bridge attributes, but,
both the bridge driver and rocker dev will try to add
attributes resulting in twice the number of attributes
being added to the skb.  (rocker dev calls ndo_dflt_bridge_getlink)

There are multiple options:
1) Generate one notification including all attributes from master and self:
   But, I don't think it will work, because both master and self may use
   the same attributes/policy. Cannot pack the same set of attributes in a
   single notification from both master and slave (duplicate attributes).

2) Generate one notification from master and the other notification from
   self (This seems to be ideal):
     For master: the master driver will send notification (bridge in this
example)
     For self: the self driver will send notification (rocker in the above
example. It can use helpers from rtnetlink.c to do so. Like the
ndo_dflt_bridge_getlink api).

This patch implements 2) (leaving the 'rtnl_bridge_notify' around to be used
with 'self').

v1->v2 :
- rtnl_bridge_notify is now called only for self,
so, remove 'BRIDGE_FLAGS_SELF' check and cleanup a few things
- rtnl_bridge_dellink used to always send a RTM_NEWLINK msg
earlier. So, I have changed the notification from br_dellink to
go as RTM_NEWLINK

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Sun, 18 Jan 2015 01:34:14 +0000 (20:34 -0500)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-01-16

This series contains updates to i40e and i40evf.

This series is a little bit larger than normal because two of the patches are
version bumps.

Shannon provides tweaks to i40e and i40evf to keep the firmware, software
and silicon validation in line together by removing unused and
deprecated code, adding define for iSCSI and fix queue mask size.  Fix
i40e so we do not give up in the reset/rebuild process if DCB setup
fails, just handle it the same as in the probe setup.  Cleans up PTP
log messages by removing the use of __func__ as we are not using that
any longer and removes the netdev name, since that can change and can
be misleading.  Adds struct size checks to indirect and command
structs that were left out previously.  Added admin queue API updates
(LLDP control, OEM OCSD and OCBB commands).

Kevin increases ASQ timeout for scenarios with multi-function devices.

Carolyn fixes a problem where the interrupts descriptions from the MSIx
configuration were truncating the needed bus info, which makes it hard
to distinguish configurations from port to port.  Increased the string
buffer size in order to allow the full data to be displayed.

Sravanthi cleans up the dump stats string from debugfs.

Jacob updates i40e to only enable the PTP interrupt in PFs which have PTP
enabled, instead of blindly enabling the PTP interrupt flags for all PFs.
Also updated i40e so that we do not do Tx or Rx timestamps if we do not
have PTP enabled.  Added the same check against pf->ptp_rx as we have
in Rx timestamp code path because it is possible that the user can
configure only Tx hardware timestamping so we do not want to check for
Rx timestamp hang since the software won't be handling them.

Neerav updates the driver to disable firmware LLDP agent for NICs with
a firmware version lower than v4.3 and added a message when this happens.
Adds parsing and reporting of iSCSI capability for a given device or
function, as well as adding support for iSCSI partition type with DCB
in NPAR mode.

v2:
 - Dropped patch 10 "i40e: clean up PTP log messages" based on feedback
   from David Laight and David Miller
 - Split up the original patch 13 "i40e: AQ API updates for new commands"
   into 2 patches (now #12 & #13) based on feedback from Or Gerlitz
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'amd-xgbe'
David S. Miller [Sat, 17 Jan 2015 03:24:29 +0000 (22:24 -0500)]
Merge branch 'amd-xgbe'

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver updates 2015-01-16

The following series of patches includes functional updates to the
driver as well as some trivial changes.

- Fix checks/warnings from checkpatch in the amd-xgbe driver
- Fix checks/warnings from checkpatch in the amd-xgbe-phy driver
- Add a check to be sure that the amd-xgbe driver is using the
  amd-xgbe-phy driver
- Use a saved control register value when bringing the PCS out of
  suspend
- Clear all device state during a device restart
- Simplify the Rx descriptor ring tracking
- Remove the need for Tx path spinlocks
- Update the auto-negotiation logic to make use of the auto-negotiation
  interrupt
- Properly support/advertise the FEC capability of the device
- Use the proper page registers during auto-negotiation extended next
  page exchange
- Add ACPI support to the amd-xgbe and amd-xgbe-phy drivers
- Allow platform specific phy settings to be supplied by UEFI

This patch series is based on net-next.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe-phy: Allow certain PHY settings to be set by UEFI
Lendacky, Thomas [Fri, 16 Jan 2015 18:47:21 +0000 (12:47 -0600)]
amd-xgbe-phy: Allow certain PHY settings to be set by UEFI

Certain PHY settings need to be configurable by UEFI depending on the
platform being used.  Add new device tree / ACPI properties that, if
present, will override the pre-determined values currently used.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe: Add ACPI support
Lendacky, Thomas [Fri, 16 Jan 2015 18:47:16 +0000 (12:47 -0600)]
amd-xgbe: Add ACPI support

Add support for ACPI to the amd-xgbe and amd-xgbe-phy drivers. This
support converts many of the device tree APIs to the new device_property
APIs.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe-phy: Use the proper auto-negotiation XNP registers
Lendacky, Thomas [Fri, 16 Jan 2015 18:47:10 +0000 (12:47 -0600)]
amd-xgbe-phy: Use the proper auto-negotiation XNP registers

When receiving and processing extended next pages the base registers
were used instead of the XNP registers. Update the code to use the
device XNP and link partner XNP registers.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe-phy: Properly support the FEC auto-negotiation
Lendacky, Thomas [Fri, 16 Jan 2015 18:47:05 +0000 (12:47 -0600)]
amd-xgbe-phy: Properly support the FEC auto-negotiation

Advertise and apply the Forward Error Correction capabilities of the
device based on the FEC ability of the device. Also, remove the use
of some hard coded values related to KR and FEC in preference of some
#defines.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe-phy: Change auto-negotiation logic
Lendacky, Thomas [Fri, 16 Jan 2015 18:47:00 +0000 (12:47 -0600)]
amd-xgbe-phy: Change auto-negotiation logic

The auto negotiation logic was geared to being the initiator of the
auto negotiation. This presented problems when auto negotiation was
initiated by the remote end. Change the auto negotiation logic to
make use of the auto negotiation event interrupt thus allowing the
auto negotiation state machine to function properly in either scenario.
This also removes the polling during auto-negotiation.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe: Remove need for Tx path spinlock
Lendacky, Thomas [Fri, 16 Jan 2015 18:46:55 +0000 (12:46 -0600)]
amd-xgbe: Remove need for Tx path spinlock

Since the Tx ring cleanup can run at the same time that data is being
transmitted, a spin lock was used to protect the ring. This patch
eliminates the need for Tx spinlocks by updating the current ring
position only after all ownership bits for data being transmitted have
been set. This will insure that ring operations in the Tx cleanup path
do not interfere with the ring operations in the Tx transmit path.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe: Simplify the Rx desciptor ring tracking
Lendacky, Thomas [Fri, 16 Jan 2015 18:46:50 +0000 (12:46 -0600)]
amd-xgbe: Simplify the Rx desciptor ring tracking

Make the Rx descriptor ring processing similar to the Tx descriptor
ring processing.  Remove the realloc_index and realloc_threshold
variables and base everything on the current index counter and the
dirty index counter.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe: Clear all state during a device restart
Lendacky, Thomas [Fri, 16 Jan 2015 18:46:45 +0000 (12:46 -0600)]
amd-xgbe: Clear all state during a device restart

When performing a device restart, like during an MTU change, sometimes
the device queues still have data and get hung up trying to flush
resulting in the device becoming unresponsive until brought down and
back up. To prevent this, always perform a device reset during a
restart.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe-phy: On suspend, save CTRL1 reg for use on resume
Lendacky, Thomas [Fri, 16 Jan 2015 18:46:39 +0000 (12:46 -0600)]
amd-xgbe-phy: On suspend, save CTRL1 reg for use on resume

Reads to registers are undefined when the PCS is powered down. To be
safe, save the CTRL1 register used for power down during suspend and
restore that value during resume.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe: Add check to be sure amd-xgbe-phy driver is used
Lendacky, Thomas [Fri, 16 Jan 2015 18:46:34 +0000 (12:46 -0600)]
amd-xgbe: Add check to be sure amd-xgbe-phy driver is used

The amd-xgbe driver relies on the amd-xgbe-phy phylib driver. Add a
check to be sure that if any errors occur during probing of the
amd-xgbe-phy driver then the amd-xgbe driver returns an error.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe-phy: Checkpatch fixes
Lendacky, Thomas [Fri, 16 Jan 2015 18:46:29 +0000 (12:46 -0600)]
amd-xgbe-phy: Checkpatch fixes

This set of patches resolves some checks reported by the checkpatch
tool.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe: Checkpatch fixes
Lendacky, Thomas [Fri, 16 Jan 2015 18:46:24 +0000 (12:46 -0600)]
amd-xgbe: Checkpatch fixes

This set of patches resolves some checks reported by the checkpatch
tool.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoi40e/i40evf: Bump i40e and i40evf versions
Sravanthi Tangeda [Sun, 14 Dec 2014 01:55:17 +0000 (01:55 +0000)]
i40e/i40evf: Bump i40e and i40evf versions

Bump i40e to 1.2.6 and i40evf to 1.2.0 version.

Change-ID: Ice127eee3a5a5d1b8765d83cff8c30f9f3b1bc32
Signed-off-by: Sravanthi Tangeda <sravanthi.tangeda@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: Support for NPAR iSCSI partition with DCB
Neerav Parikh [Sun, 14 Dec 2014 01:55:16 +0000 (01:55 +0000)]
i40e: Support for NPAR iSCSI partition with DCB

Add parsing and reporting of iSCSI capability for a given device or
function.

Also add support for iSCSI partition type with DCB in NPAR mode.
In this mode it is expected that software would configure both the LAN
and iSCSI traffic classes for the iSCSI partition; whereas all the NIC
type partitions will use LAN TC (TC0) only.
Hence, the patch enables querying of DCB configuration in MFP mode and
configures TCs for iSCSI partition type.

Though NIC type partitions may not have more than 1 TC enabled for them
the port may have multiple TCs enabled and hence I40E_FLAG_DCB_ENABLED
will be set/reset on all the partitions based on number of TCs on the
port. This is required as in DCB environment it is expected that all
traffic will be priority tagged.

Change-ID: I8c6e1cfd46c46d8a39c57d9020d9ff8d42ed8a7d
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: when Rx timestamps disabled set specific mode
Jacob Keller [Sun, 14 Dec 2014 01:55:15 +0000 (01:55 +0000)]
i40e: when Rx timestamps disabled set specific mode

Instead of leaving the Rx timestamps in the same mode as before if we
disable the Rx logic, we can set it into a mode that has the fewest
possible timestamps generated. To do this, select only V1 mode, but do
not enable UDP packet recognition. This should eliminate all (or at
least almost all) Rx timestamps, since V1 packets are always over UDP.

Change-ID: If847288e0030a716e059c4c33ab114f2cf038f05
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: use same check for Rx hang as for Rx timestamps
Jacob Keller [Sun, 14 Dec 2014 01:55:14 +0000 (01:55 +0000)]
i40e: use same check for Rx hang as for Rx timestamps

It's possible that the user configured only Tx hardware timestamping,
and thus we might be receiving PTP traffic which we timestamp but which
software never reads. In this case we don't want to check for Rx
timestamp hang, because we already know that software won't be handling
them. Thus, we add the same check against pf->ptp_rx as we have in the
Rx timestamp code path.

Change-ID: I66486c8dba307facbff8eace4e52e2f083789d1b
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: AQ API updates for new commands
Shannon Nelson [Sun, 14 Dec 2014 01:55:13 +0000 (01:55 +0000)]
i40e: AQ API updates for new commands

Add lldp control commands, add oem ocsd and ocbb commands.

Change-ID: I89eba2bd02013d0a44e1ce900559c54bb15f4a66
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: AQ API updates
Jeff Kirsher [Fri, 16 Jan 2015 13:02:52 +0000 (05:02 -0800)]
i40e: AQ API updates

Fix up NVM config read and write data structs.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: add more struct size checks
Shannon Nelson [Sun, 14 Dec 2014 01:55:12 +0000 (01:55 +0000)]
i40e: add more struct size checks

Add struct size checks to many of the indirect structs and a few
command structs that were left out previously.

Change-ID: I7810b9af0f04e3ced670639f8671daf7df9b3f4d
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: Issue "Stop LLDP" command for firmware older than v4.3
Neerav Parikh [Sun, 14 Dec 2014 01:55:11 +0000 (01:55 +0000)]
i40e: Issue "Stop LLDP" command for firmware older than v4.3

Disable firmware LLDP agent for NICs with firmware version lower than
v4.3. Added a message when driver disables the firmware LLDP agent on
such NICs.

Change-ID: Ia8abf89439c70cb50e23db82753d7d282265506b
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: check I40E_FLAG_PTP before handling Tx or Rx timestamps
Jacob Keller [Sun, 14 Dec 2014 01:55:09 +0000 (01:55 +0000)]
i40e: check I40E_FLAG_PTP before handling Tx or Rx timestamps

We should not be doing Tx or Rx timestamps if we do not have PTP
enabled. Add checks to ensure that we don't attempt to handle any PTP
related timestamping code if we have not enabled PTP on that PF.

Change-ID: I4335942ae2d5c5f91abfdbeeea02bcace49e7677
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: only enable PTP interrupt cause if PTP is enabled
Jacob Keller [Sun, 14 Dec 2014 01:55:08 +0000 (01:55 +0000)]
i40e: only enable PTP interrupt cause if PTP is enabled

We should not blindly enable the PTP interrupt flags for all PFs. We
should only enable the PTP interrupt in PFs which have enabled
PTP.

Change-ID: I051a17cae4c199a2f3cf7852266e27eda6630525
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e/i40evf: Bump i40e/i40evf versions
Catherine Sullivan [Thu, 11 Dec 2014 07:06:41 +0000 (07:06 +0000)]
i40e/i40evf: Bump i40e/i40evf versions

Bump i40e to 1.2.5 and i40evf to 1.0.7.

Change-ID: I622556829056e3ed42d3b9d285fc5ffb693b21cc
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: Dump Stats string removed from debugfs help command
Sravanthi Tangeda [Thu, 11 Dec 2014 07:06:40 +0000 (07:06 +0000)]
i40e: Dump Stats string removed from debugfs help command

Dump Stats string has been removed from functional debugfs
help message. Now it does not show up when we echo command to
debugfs/Fortville queue.

Change-ID: I9333473826b574f1afa6ddb785fd7adfbdcb2884
Signed-off-by: Sravanthi Tangeda <sravanthi.tangeda@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: Add define for interrupt name string len
Carolyn Wyborny [Thu, 11 Dec 2014 07:06:39 +0000 (07:06 +0000)]
i40e: Add define for interrupt name string len

This patch creates a define for interrupt name string configuration that
is large enough to contain full bus/slot info, rather than just netdev->name.

Change-ID: Iaac0d23dfb8526defeed69d91cea85ed4a50ddb2
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: don't give up on DCB error after reset
Shannon Nelson [Thu, 11 Dec 2014 07:06:38 +0000 (07:06 +0000)]
i40e: don't give up on DCB error after reset

We don't need to give up in the reset/rebuild process if the DCB setup failed,
so handle it here the same as in the probe setup.  Also adjust the log strings
a little to look less scary.

Change-ID: I57308d703047e61d3f1a5e471ea77be232444ca0
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: fix proc/int descriptions
Carolyn Wyborny [Thu, 11 Dec 2014 07:06:37 +0000 (07:06 +0000)]
i40e: fix proc/int descriptions

This patch fixes a problem where the /proc/interrupts descriptions
from the msix configuration were truncating the needed bus info,
making it hard to distinguish configuration from port to port.
This patch increases the string buffer size in order to allow the
full data to be displayed and sync's the text formatting of the misc
and fdir interrupt names

Change-ID: Ib01d6c61fb3f4ac70fbdf5bcc520b22638ea54b7
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e/i40evf: Increase ASQ timeout
Kevin Scott [Thu, 11 Dec 2014 07:06:36 +0000 (07:06 +0000)]
i40e/i40evf: Increase ASQ timeout

Increase ASQ timeout for some scenarios with multi-function devices

Change-ID: I2d7655b19e6c6f9a7ad04deacb106ca8d53886db
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e/i40evf: AdminQ updates ww36
Shannon Nelson [Fri, 12 Dec 2014 07:50:07 +0000 (07:50 +0000)]
i40e/i40evf: AdminQ updates ww36

Several little tweaks to keep FW, SV, and SW in line together
 - Remove the unused and deprecated
   i40e_aqc_opc_debug_modify_internals
 - Add define for iSCSI capability
 - Fix queue mask size
 - Adjust i40e_aqc_oem_param_change for ease-of-use

Change-ID: I51f250b367912968a7cec61b3a68110d9796e914
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kamil Kacperski <kamil.kacperski@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoBluetooth: Remove unused function
Rickard Strandqvist [Sun, 4 Jan 2015 15:55:14 +0000 (16:55 +0100)]
Bluetooth: Remove unused function

Remove the function hci_conn_change_link_key() that is not used anywhere.

This was partially found by using a static code analysis program called
cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
9 years agonetlink: Fix netlink_insert EADDRINUSE error
Herbert Xu [Fri, 16 Jan 2015 06:23:48 +0000 (17:23 +1100)]
netlink: Fix netlink_insert EADDRINUSE error

The patch c5adde9468b0714a051eac7f9666f23eb10b61f7 ("netlink:
eliminate nl_sk_hash_lock") introduced a bug where the EADDRINUSE
error has been replaced by ENOMEM.  This patch rectifies that
problem.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agorhashtable: Fix race in rhashtable_destroy() and use regular work_struct
Ying Xue [Fri, 16 Jan 2015 03:13:09 +0000 (11:13 +0800)]
rhashtable: Fix race in rhashtable_destroy() and use regular work_struct

When we put our declared work task in the global workqueue with
schedule_delayed_work(), its delay parameter is always zero.
Therefore, we should define a regular work in rhashtable structure
instead of a delayed work.

By the way, we add a condition to check whether resizing functions
are NULL before cancelling the work, avoiding to cancel an
uninitialized work.

Lastly, while we wait for all work items we submitted before to run
to completion with cancel_delayed_work(), ht->mutex has been taken in
rhashtable_destroy(). Moreover, cancel_delayed_work() doesn't return
until all work items are accomplished, and when work items are
scheduled, the work's function - rht_deferred_worker() will be called.
However, as rht_deferred_worker() also needs to acquire the lock,
deadlock might happen at the moment as the lock is already held before.
So if the cancel work function is moved out of the lock covered scope,
this will avoid the deadlock.

Fixes: 97defe1 ("rhashtable: Per bucket locks & deferred expansion/shrinking")
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Cc: Thomas Graf <tgraf@suug.ch>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'iw_cxgb4-next'
David S. Miller [Fri, 16 Jan 2015 06:07:02 +0000 (01:07 -0500)]
Merge branch 'iw_cxgb4-next'

Hariprasad Shenai says:

====================
Refactor macros to conform to uniform standards

This patch series cleansup macros/register defines, defined in t4.h and
t4fw_ri_api.h and all the affected files.

This patch series is created against net-next tree and includes patches on
iw_cxgb4 tree. Since the patches are dependent on previous cleanup patched we
would line to get this series merged through net-next tree.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoiw_cxgb4: Cleanup register defines/MACROS defined in t4fw_ri_api.h
Hariprasad Shenai [Fri, 16 Jan 2015 03:54:48 +0000 (09:24 +0530)]
iw_cxgb4: Cleanup register defines/MACROS defined in t4fw_ri_api.h

Cleanup all the MACROS that are defined in t4fw_ri_api.h and affected files

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoiw_cxgb4: Cleanup register defines/MACROS defined in t4.h
Hariprasad Shenai [Fri, 16 Jan 2015 03:54:47 +0000 (09:24 +0530)]
iw_cxgb4: Cleanup register defines/MACROS defined in t4.h

Cleanup all the MACROS defined in t4.h and the affected files

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoiw_cxgb4: Cleanup register defines/MACROS defined in t4fw_ri_api.h
Hariprasad Shenai [Fri, 16 Jan 2015 03:54:48 +0000 (09:24 +0530)]
iw_cxgb4: Cleanup register defines/MACROS defined in t4fw_ri_api.h

Cleanup all the MACROS that are defined in t4fw_ri_api.h and affected files

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoiw_cxgb4: Cleanup register defines/MACROS defined in t4.h
Hariprasad Shenai [Fri, 16 Jan 2015 03:54:47 +0000 (09:24 +0530)]
iw_cxgb4: Cleanup register defines/MACROS defined in t4.h

Cleanup all the MACROS defined in t4.h and the affected files

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: Create gem_ethtool_ops for new statistics functions
Xander Huff [Thu, 15 Jan 2015 21:55:20 +0000 (15:55 -0600)]
net/macb: Create gem_ethtool_ops for new statistics functions

10/100 MACB does not have the same statistics possibilities as GEM. Separate
macb_ethtool_ops to make a new GEM-specific struct with the new statistics
functions included.

Signed-off-by: Xander Huff <xander.huff@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: Add whitespace around arithmetic operators
Xander Huff [Thu, 15 Jan 2015 21:55:19 +0000 (15:55 -0600)]
net/macb: Add whitespace around arithmetic operators

Spaces should surround add, multiply, and bitshift operators.

Signed-off-by: Xander Huff <xander.huff@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: Fix comments to meet style guidelines
Xander Huff [Thu, 15 Jan 2015 21:55:18 +0000 (15:55 -0600)]
net/macb: Fix comments to meet style guidelines

Change comments to not exceed 80 characters per line.
Update block comments in macb.h to start on the line after /*.

Signed-off-by: Xander Huff <xander.huff@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoDriver: Vmxnet3: Fix ethtool -S to return correct rx queue stats
Shrikrishna Khare [Thu, 15 Jan 2015 19:54:30 +0000 (11:54 -0800)]
Driver: Vmxnet3: Fix ethtool -S to return correct rx queue stats

Signed-off-by: Gao Zhenyu <gzhenyu@vmware.com>
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobridge: use MDBA_SET_ENTRY_MAX for maxtype in nlmsg_parse()
Nicolas Dichtel [Thu, 15 Jan 2015 15:29:12 +0000 (16:29 +0100)]
bridge: use MDBA_SET_ENTRY_MAX for maxtype in nlmsg_parse()

This is just a cleanup, because in the current code MDBA_SET_ENTRY_MAX ==
MDBA_SET_ENTRY.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: smc91x: Add Atari EtherNAT support
Michael Schmitz [Thu, 15 Jan 2015 13:06:15 +0000 (14:06 +0100)]
net: smc91x: Add Atari EtherNAT support

Add Atari specific code to the smc91x Ethernet driver. This code is used
on the EtherNAT adapter card for the Atari Falcon extension port.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Tested-by: Christian Steigies <cts@debian.org>
[geert: Sort Kconfig entries, split in hard and soft dependencies]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'mac80211-next-for-davem-2015-01-15' of git://git.kernel.org/pub/scm/linux...
David S. Miller [Fri, 16 Jan 2015 00:16:56 +0000 (19:16 -0500)]
Merge tag 'mac80211-next-for-davem-2015-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Here's a big pile of changes for this round.

We have
 * a lot of regulatory code changes to deal with the
   way newer Intel devices handle this
 * a change to drop packets while disconnecting from
   an AP instead of trying to wait for them
 * a new attempt at improving the tailroom accounting
   to not kick in too much for performance reasons
 * improvements in wireless link statistics
 * many other small improvements and small fixes that
   didn't seem necessary for 3.19 (e.g. in hwsim which
   is testing only code)

Conflicts:
drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c

Minor overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'cxgb4-next'
David S. Miller [Thu, 15 Jan 2015 23:59:55 +0000 (18:59 -0500)]
Merge branch 'cxgb4-next'

Anish Bhatt says:

====================
cxgb4/cxgb4i : Update & use ipv6 handling api

This patch series consolidates and updates the ipv6 api, as well as exports
it for use by upper level drivers dependent on cxgb4

v2: Fix formatting issues in clip_tbl.c
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agocxgb4i : Call into recently added cxgb4 ipv6 api
Anish Bhatt [Wed, 14 Jan 2015 23:17:35 +0000 (15:17 -0800)]
cxgb4i : Call into recently added cxgb4 ipv6 api

Get a reference on every ipv6 address we offload to hardware so that it cannot
be prematurely cleared out before cleanup.

Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agocxgb4 : Update ipv6 address handling api
Anish Bhatt [Wed, 14 Jan 2015 23:17:34 +0000 (15:17 -0800)]
cxgb4 : Update ipv6 address handling api

This patch improves on previously added support for ipv6 addresses. The code
is consolidated to a single file and adds an api for use by dependent upper
level drivers such as cxgb4i/iw_cxgb4 etc.

Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Deepak Singh <deepak.s@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv4: per cpu uncached list
Eric Dumazet [Wed, 14 Jan 2015 23:17:06 +0000 (15:17 -0800)]
ipv4: per cpu uncached list

RAW sockets with hdrinc suffer from contention on rt_uncached_lock
spinlock.

One solution is to use percpu lists, since most routes are destroyed
by the cpu that created them.

It is unclear why we even have to put these routes in uncached_list,
as all outgoing packets should be freed when a device is dismantled.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: caacf05e5ad1 ("ipv4: Properly purge netdev references on uncached routes.")
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoBluetooth: Add paranoid check for existing LE and BR/EDR SMP channels
Marcel Holtmann [Thu, 15 Jan 2015 16:04:21 +0000 (08:04 -0800)]
Bluetooth: Add paranoid check for existing LE and BR/EDR SMP channels

When the SMP channels have been already registered, then print out a
clear WARN_ON message that something went wrong. Also unregister the
existing channels in this case before trying to register new ones.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
9 years agonet: sh_eth: Use u32 for 32-bit register data
Geert Uytterhoeven [Thu, 15 Jan 2015 10:54:28 +0000 (11:54 +0100)]
net: sh_eth: Use u32 for 32-bit register data

Replace "unsigned long" by "u32" when handling 32-bit register data.

A.o., this saves 11 * 36 bytes in the static sh_eth_cpu_data structures
when compiling for 64-bit.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agodm9000: Add regulator and reset support to dm9000
Zubair Lutfullah Kakakhel [Thu, 15 Jan 2015 10:12:26 +0000 (10:12 +0000)]
dm9000: Add regulator and reset support to dm9000

In boards, the dm9000 chip's power and reset can be controlled by gpio.

It makes sense to add them to the dm9000 driver and let dt be used to
enable power and reset the phy.

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosocket: use iov_length()
Nicolas Dichtel [Thu, 15 Jan 2015 09:35:58 +0000 (10:35 +0100)]
socket: use iov_length()

Better to use available helpers.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoBluetooth: Fix lookup of fixed channels by local bdaddr
Johan Hedberg [Thu, 15 Jan 2015 11:06:45 +0000 (13:06 +0200)]
Bluetooth: Fix lookup of fixed channels by local bdaddr

The comparing of chan->src should always be done against the local
identity address, represented by hcon->src and hcon->src_type. This
patch modifies l2cap_global_fixed_chan() to take the full hci_conn so
that we can easily compare against hcon->src and hcon->src_type.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
9 years agoBluetooth: Add helpers for src/dst bdaddr type conversion
Johan Hedberg [Thu, 15 Jan 2015 11:06:44 +0000 (13:06 +0200)]
Bluetooth: Add helpers for src/dst bdaddr type conversion

The current bdaddr_type() usage in l2cap_core.c is a bit funny in that
it's always passed a hci_conn + a hci_conn member. Because of this only
the hci_conn is really needed. Since the second parameter is always
either hcon->src_type or hcon->dst type this patch adds two helper
functions for each purpose: bdaddr_src_type() and bdaddr_dst_type().

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
9 years agoBluetooth: Bind the SMP channel registration to management power state
Marcel Holtmann [Wed, 14 Jan 2015 23:43:11 +0000 (15:43 -0800)]
Bluetooth: Bind the SMP channel registration to management power state

When the controller gets powered on via the management interface, then
register the supported SMP channels. There is no point in registering
these channels earlier since it is not know what identity address the
controller is going to operate with.

When powering down a controller unregister all SMP channels. This is
required since a powered down controller is allowed to change its
identity address.

In addition the SMP channels are only available when the controller
is powered via the management interface. When using legacy ioctl, then
Bluetooth Low Energy is not supported and registering kernel side SMP
integration may actually cause confusion.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
9 years agoBluetooth: Don't register any SMP channel if LE is not supported
Marcel Holtmann [Wed, 14 Jan 2015 23:43:10 +0000 (15:43 -0800)]
Bluetooth: Don't register any SMP channel if LE is not supported

When LE features are not supported, then do not bother registering any
kind of SMP channel.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
9 years agoBluetooth: Fix LE SMP channel source address and source address type
Marcel Holtmann [Wed, 14 Jan 2015 23:43:09 +0000 (15:43 -0800)]
Bluetooth: Fix LE SMP channel source address and source address type

The source address and source address type of the LE SMP channel can
either be the public address of the controller or the static random
address configured by the host.

Right now the public address is used for the LE SMP channel and
obviously that is not correct if the controller operates with the
configured static random address.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
9 years agoBluetooth: Fix issue with switching BR/EDR back on when disabled
Marcel Holtmann [Wed, 14 Jan 2015 22:40:42 +0000 (14:40 -0800)]
Bluetooth: Fix issue with switching BR/EDR back on when disabled

For dual-mode controllers it is possible to disable BR/EDR and operate
as LE single mode controllers with a static random address. If that is
the case, then refuse switching BR/EDR back on after the controller has
been powered.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
9 years agoBluetooth: Show device address type for L2CAP debugfs entries
Marcel Holtmann [Wed, 14 Jan 2015 21:44:21 +0000 (13:44 -0800)]
Bluetooth: Show device address type for L2CAP debugfs entries

The devices address types are BR/EDR Public, LE Public and LE Random and
any of these three is valid for L2CAP connections. So show the correct
type in the debugfs list.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
David S. Miller [Thu, 15 Jan 2015 06:50:25 +0000 (01:50 -0500)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next

Pablo Neira Ayuso says:

====================
netfilter updates for net-next

The following patchset contains netfilter updates for net-next, just a
bunch of cleanups and small enhancement to selectively flush conntracks
in ctnetlink, more specifically the patches are:

1) Rise default number of buckets in conntrack from 16384 to 65536 in
   systems with >= 4GBytes, patch from Marcelo Leitner.

2) Small refactor to save one level on indentation in xt_osf, from
   Joe Perches.

3) Remove unnecessary sizeof(char) in nf_log, from Fabian Frederick.

4) Another small cleanup to remove redundant variable in nfnetlink,
   from Duan Jiong.

5) Fix compilation warning in nfnetlink_cthelper on parisc, from
   Chen Gang.

6) Fix wrong format in debugging for ctseqadj, from Gao feng.

7) Selective conntrack flushing through the mark for ctnetlink, patch
   from Kristian Evensen.

8) Remove nf_ct_conntrack_flush_report() exported symbol now that is
   not required anymore after the selective flushing patch, again from
   Kristian.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'vxlan_group_policy_extension'
David S. Miller [Thu, 15 Jan 2015 06:12:13 +0000 (01:12 -0500)]
Merge branch 'vxlan_group_policy_extension'

Thomas Graf says:

====================
VXLAN Group Policy Extension

Implements supports for the Group Policy VXLAN extension [0] to provide
a lightweight and simple security label mechanism across network peers
based on VXLAN. The security context and associated metadata is mapped
to/from skb->mark. This allows further mapping to a SELinux context
using SECMARK, to implement ACLs directly with nftables, iptables, OVS,
tc, etc.

The extension is disabled by default and should be run on a distinct
port in mixed Linux VXLAN VTEP environments. Liberal VXLAN VTEPs
which ignore unknown reserved bits will be able to receive VXLAN-GBP
frames.

Simple usage example:

10.1.1.1:
   # ip link add vxlan0 type vxlan id 10 remote 10.1.1.2 gbp
   # iptables -I OUTPUT -m owner --uid-owner 101 -j MARK --set-mark 0x200

10.1.1.2:
   # ip link add vxlan0 type vxlan id 10 remote 10.1.1.1 gbp
   # iptables -I INPUT -m mark --mark 0x200 -j DROP

iproute2 [1] and OVS [2] support will be provided in separate patches.

[0] https://tools.ietf.org/html/draft-smith-vxlan-group-policy
[1] https://github.com/tgraf/iproute2/tree/vxlan-gbp
[2] https://github.com/tgraf/ovs/tree/vxlan-gbp
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Support VXLAN Group Policy extension
Thomas Graf [Thu, 15 Jan 2015 02:53:59 +0000 (03:53 +0100)]
openvswitch: Support VXLAN Group Policy extension

Introduces support for the group policy extension to the VXLAN virtual
port. The extension is disabled by default and only enabled if the user
has provided the respective configuration.

  ovs-vsctl add-port br0 vxlan0 -- \
     set Interface vxlan0 type=vxlan options:exts=gbp

The configuration interface to enable the extension is based on a new
attribute OVS_VXLAN_EXT_GBP nested inside OVS_TUNNEL_ATTR_EXTENSION
which can carry additional extensions as needed in the future.

The group policy metadata is stored as binary blob (struct ovs_vxlan_opts)
internally just like Geneve options but transported as nested Netlink
attributes to user space.

Renames the existing TUNNEL_OPTIONS_PRESENT to TUNNEL_GENEVE_OPT with the
binary value kept intact, a new flag TUNNEL_VXLAN_OPT is introduced.

The attributes OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS and existing
OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS are implemented mutually exclusive.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Allow for any level of nesting in flow attributes
Thomas Graf [Thu, 15 Jan 2015 02:53:58 +0000 (03:53 +0100)]
openvswitch: Allow for any level of nesting in flow attributes

nlattr_set() is currently hardcoded to two levels of nesting. This change
introduces struct ovs_len_tbl to define minimal length requirements plus
next level nesting tables to traverse the key attributes to arbitrary depth.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Rename GENEVE_TUN_OPTS() to TUN_METADATA_OPTS()
Thomas Graf [Thu, 15 Jan 2015 02:53:57 +0000 (03:53 +0100)]
openvswitch: Rename GENEVE_TUN_OPTS() to TUN_METADATA_OPTS()

Also factors out Geneve validation code into a new separate function
validate_and_copy_geneve_opts().

A subsequent patch will introduce VXLAN options. Rename the existing
GENEVE_TUN_OPTS() to reflect its extended purpose of carrying generic
tunnel metadata options.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agovxlan: Only bind to sockets with compatible flags enabled
Thomas Graf [Thu, 15 Jan 2015 02:53:56 +0000 (03:53 +0100)]
vxlan: Only bind to sockets with compatible flags enabled

A VXLAN net_device looking for an appropriate socket may only consider
a socket which has a matching set of flags/extensions enabled. If
incompatible flags are enabled, return a conflict to have the caller
create a distinct socket with distinct port.

The OVS VXLAN port is kept unaware of extensions at this point.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agovxlan: Group Policy extension
Thomas Graf [Thu, 15 Jan 2015 02:53:55 +0000 (03:53 +0100)]
vxlan: Group Policy extension

Implements supports for the Group Policy VXLAN extension [0] to provide
a lightweight and simple security label mechanism across network peers
based on VXLAN. The security context and associated metadata is mapped
to/from skb->mark. This allows further mapping to a SELinux context
using SECMARK, to implement ACLs directly with nftables, iptables, OVS,
tc, etc.

The group membership is defined by the lower 16 bits of skb->mark, the
upper 16 bits are used for flags.

SELinux allows to manage label to secure local resources. However,
distributed applications require ACLs to implemented across hosts. This
is typically achieved by matching on L2-L4 fields to identify the
original sending host and process on the receiver. On top of that,
netlabel and specifically CIPSO [1] allow to map security contexts to
universal labels.  However, netlabel and CIPSO are relatively complex.
This patch provides a lightweight alternative for overlay network
environments with a trusted underlay. No additional control protocol
is required.

           Host 1:                       Host 2:

      Group A        Group B        Group B     Group A
      +-----+   +-------------+    +-------+   +-----+
      | lxc |   | SELinux CTX |    | httpd |   | VM  |
      +--+--+   +--+----------+    +---+---+   +--+--+
  \---+---/                     \----+---/
      |                              |
  +---+---+                      +---+---+
  | vxlan |                      | vxlan |
  +---+---+                      +---+---+
      +------------------------------+

Backwards compatibility:
A VXLAN-GBP socket can receive standard VXLAN frames and will assign
the default group 0x0000 to such frames. A Linux VXLAN socket will
drop VXLAN-GBP  frames. The extension is therefore disabled by default
and needs to be specifically enabled:

   ip link add [...] type vxlan [...] gbp

In a mixed environment with VXLAN and VXLAN-GBP sockets, the GBP socket
must run on a separate port number.

Examples:
 iptables:
  host1# iptables -I OUTPUT -m owner --uid-owner 101 -j MARK --set-mark 0x200
  host2# iptables -I INPUT -m mark --mark 0x200 -j DROP

 OVS:
  # ovs-ofctl add-flow br0 'in_port=1,actions=load:0x200->NXM_NX_TUN_GBP_ID[],NORMAL'
  # ovs-ofctl add-flow br0 'in_port=2,tun_gbp_id=0x200,actions=drop'

[0] https://tools.ietf.org/html/draft-smith-vxlan-group-policy
[1] http://lwn.net/Articles/204905/

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Thu, 15 Jan 2015 05:53:17 +0000 (00:53 -0500)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
drivers/net/xen-netfront.c

Minor overlapping changes in xen-netfront.c, mostly to do
with some buffer management changes alongside the split
of stats into TX and RX.

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 14 Jan 2015 22:17:37 +0000 (11:17 +1300)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Don't use uninitialized data in IPVS, from Dan Carpenter.

 2) conntrack race fixes from Pablo Neira Ayuso.

 3) Fix TX hangs with i40e, from Jesse Brandeburg.

 4) Fix budget return from poll calls in dnet and alx, from Eric
    Dumazet.

 5) Fix bugus "if (unlikely(x) < 0)" test in AF_PACKET, from Christoph
    Jaeger.

 6) Fix bug introduced by conversion to list_head in TIPC retransmit
    code, from Jon Paul Maloy.

 7) Don't use GFP_NOIO under spinlock in USB kaweth driver, from Alexey
    Khoroshilov.

 8) Fix bridge build with INET disabled, from Arnd Bergmann.

 9) Fix netlink array overrun for PROBE attributes in openvswitch, from
    Thomas Graf.

10) Don't hold spinlock across synchronize_irq() in tg3 driver, from
    Prashant Sreedharan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  tg3: Release tp->lock before invoking synchronize_irq()
  tg3: tg3_reset_task() needs to use rtnl_lock to synchronize
  tg3: tg3_timer() should grab tp->lock before checking for tp->irq_sync
  team: avoid possible underflow of count_pending value for notify_peers and mcast_rejoin
  openvswitch: packet messages need their own probe attribtue
  i40e: adds FCoE configure option
  cxgb4vf: Fix queue allocation for 40G adapter
  netdevice: Add missing parentheses in macro
  bridge: only provide proxy ARP when CONFIG_INET is enabled
  neighbour: fix base_reachable_time(_ms) not effective immediatly when changed
  net: fec: fix MDIO bus assignement for dual fec SoC's
  xen-netfront: use different locks for Rx and Tx stats
  drivers: net: cpsw: fix multicast flush in dual emac mode
  cxgb4vf: Initialize mdio_addr before using it
  net: Corrected the comment describing the ndo operations to reflect the actual prototype for couple of operations
  usb/kaweth: use GFP_ATOMIC under spin_lock in usb_start_wait_urb()
  MAINTAINERS: add me as ibmveth maintainer
  tipc: fix bug in broadcast retransmit code
  update ip-sysctl.txt documentation (v2)
  net/at91_ether: prepare and unprepare clock
  ...

9 years agoMerge branch 'tg3-net'
David S. Miller [Wed, 14 Jan 2015 22:05:55 +0000 (17:05 -0500)]
Merge branch 'tg3-net'

Prashant Sreedharan says:

====================
tg3: synchronize_irq() should be called without taking locks

v2: Added Reported-by, Tested-by fields and reference to the thread that
    reported the problem

This series addresses the problem reported by Peter Hurley in mail thread
https://lkml.org/lkml/2015/1/12/1082
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotg3: Release tp->lock before invoking synchronize_irq()
Prashant Sreedharan [Wed, 14 Jan 2015 19:34:44 +0000 (11:34 -0800)]
tg3: Release tp->lock before invoking synchronize_irq()

synchronize_irq() can sleep waiting, for pending IRQ handlers so driver
should release the tp->lock spin lock before invoking synchronize_irq()

Reported-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Prashant Sreedharan <prashant@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotg3: tg3_reset_task() needs to use rtnl_lock to synchronize
Prashant Sreedharan [Wed, 14 Jan 2015 19:34:17 +0000 (11:34 -0800)]
tg3: tg3_reset_task() needs to use rtnl_lock to synchronize

Currently tg3_reset_task() uses only tp->lock for synchronizing with code
paths like tg3_open() etc. But since tp->lock is released before doing
synchronize_irq(), rtnl_lock should be taken in tg3_reset_task() to
synchronize it with other code paths.

Reported-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Prashant Sreedharan <prashant@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotg3: tg3_timer() should grab tp->lock before checking for tp->irq_sync
Prashant Sreedharan [Wed, 14 Jan 2015 19:33:49 +0000 (11:33 -0800)]
tg3: tg3_timer() should grab tp->lock before checking for tp->irq_sync

This is to avoid the race between tg3_timer() and the execution paths
which does not invoke tg3_timer_stop() and releases tp->lock before
calling synchronize_irq()

Reported-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Prashant Sreedharan <prashant@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Wed, 14 Jan 2015 21:54:30 +0000 (10:54 +1300)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "Two bugfixes for arm64.  I will have another pull request next week,
  but otherwise things are calm"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  arm64: KVM: Fix HCR setting for 32bit guests
  arm64: KVM: Fix TLB invalidation by IPA/VMID

9 years agoteam: avoid possible underflow of count_pending value for notify_peers and mcast_rejoin
Jiri Pirko [Wed, 14 Jan 2015 17:15:30 +0000 (18:15 +0100)]
team: avoid possible underflow of count_pending value for notify_peers and mcast_rejoin

This patch is fixing a race condition that may cause setting
count_pending to -1, which results in unwanted big bulk of arp messages
(in case of "notify peers").

Consider following scenario:

count_pending == 2
   CPU0                                           CPU1
team_notify_peers_work
  atomic_dec_and_test (dec count_pending to 1)
  schedule_delayed_work
 team_notify_peers
   atomic_add (adding 1 to count_pending)
team_notify_peers_work
  atomic_dec_and_test (dec count_pending to 1)
  schedule_delayed_work
team_notify_peers_work
  atomic_dec_and_test (dec count_pending to 0)
   schedule_delayed_work
team_notify_peers_work
  atomic_dec_and_test (dec count_pending to -1)

Fix this race by using atomic_dec_if_positive - that will prevent
count_pending running under 0.

Fixes: fc423ff00df3a1955441 ("team: add peer notification")
Fixes: 492b200efdd20b8fcfd ("team: add support for sending multicast rejoins")
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Wed, 14 Jan 2015 21:50:29 +0000 (10:50 +1300)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:
 "Two small performance tweaks, the plumbing for the execveat system
  call and a couple of bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/uprobes: fix user space PER events
  s390/bpf: Fix JMP_JGE_X (A > X) and JMP_JGT_X (A >= X)
  s390/bpf: Fix ALU_NEG (A = -A)
  s390/mm: avoid using pmd_to_page for !USE_SPLIT_PMD_PTLOCKS
  s390/timex: fix get_tod_clock_ext() inline assembly
  s390: wire up execveat syscall
  s390/kernel: use stnsm 255 instead of stosm 0
  s390/vtime: Get rid of redundant WARN_ON
  s390/zcrypt: kernel oops at insmod of the z90crypt device driver

9 years agoopenvswitch: packet messages need their own probe attribtue
Thomas Graf [Wed, 14 Jan 2015 13:56:19 +0000 (13:56 +0000)]
openvswitch: packet messages need their own probe attribtue

User space is currently sending a OVS_FLOW_ATTR_PROBE for both flow
and packet messages. This leads to an out-of-bounds access in
ovs_packet_cmd_execute() because OVS_FLOW_ATTR_PROBE >
OVS_PACKET_ATTR_MAX.

Introduce a new OVS_PACKET_ATTR_PROBE with the same numeric value
as OVS_FLOW_ATTR_PROBE to grow the range of accepted packet attributes
while maintaining to be binary compatible with existing OVS binaries.

Fixes: 05da589 ("openvswitch: Add support for OVS_FLOW_ATTR_PROBE.")
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Tracked-down-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoi40e: adds FCoE configure option
Vasu Dev [Wed, 14 Jan 2015 13:14:07 +0000 (05:14 -0800)]
i40e: adds FCoE configure option

Adds FCoE config option I40E_FCOE, so that FCoE can be enabled
as needed but otherwise have it disabled by default.

This also eliminate multiple FCoE config checks, instead now just
one config check for CONFIG_I40E_FCOE.

The I40E FCoE was added with 3.17 kernel and therefore this patch
shall be applied to stable 3.17 kernel also.

CC: <stable@vger.kernel.org>
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoBluetooth: 6lowpan: Remove PSM setting code
Jukka Rissanen [Thu, 8 Jan 2015 15:00:55 +0000 (17:00 +0200)]
Bluetooth: 6lowpan: Remove PSM setting code

Removing PSM setting debugfs interface as the IPSP has a well
defined PSM value that should be used.

The patch introduces enable flag that can be used to toggle
6lowpan on/off.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>