Linus Torvalds [Sun, 28 Jun 2020 17:29:38 +0000 (10:29 -0700)]
Merge tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU-vs-KCSAN fixes from Borislav Petkov:
"A single commit that uses "arch_" atomic operations to avoid the
instrumentation that comes with the non-"arch_" versions.
In preparation for that commit, it also has another commit that makes
these "arch_" atomic operations available to generic code.
Without these commits, KCSAN uses can see pointless errors"
* tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Fixup noinstr warnings
locking/atomics: Provide the arch_atomic_ interface to generic code
Linus Torvalds [Sun, 28 Jun 2020 17:16:15 +0000 (10:16 -0700)]
Merge tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
"Three fixes from Peter Zijlstra suppressing KCOV instrumentation in
noinstr sections.
Peter Zijlstra says:
"Address KCOV vs noinstr. There is no function attribute to
selectively suppress KCOV instrumentation, instead teach objtool
to NOP out the calls in noinstr functions"
This cures a bunch of KCOV crashes (as used by syzcaller)"
* tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix noinstr vs KCOV
objtool: Provide elf_write_{insn,reloc}()
objtool: Clean up elf_write() condition
Linus Torvalds [Sun, 28 Jun 2020 16:42:47 +0000 (09:42 -0700)]
Merge tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry fixes from Borislav Petkov:
"This is the x86/entry urgent pile which has accumulated since the
merge window.
It is not the smallest but considering the almost complete entry core
rewrite, the amount of fixes to follow is somewhat higher than usual,
which is to be expected.
Peter Zijlstra says:
'These patches address a number of instrumentation issues that were
found after the x86/entry overhaul. When combined with rcu/urgent
and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy
again.
Part of making this all work is bumping the minimum GCC version for
KASAN builds to gcc-8.3, the reason for this is that the
__no_sanitize_address function attribute is broken in GCC releases
before that.
No known GCC version has a working __no_sanitize_undefined, however
because the only noinstr violation that results from this happens
when an UB is found, we treat it like WARN. That is, we allow it to
violate the noinstr rules in order to get the warning out'"
* tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix #UD vs WARN more
x86/entry: Increase entry_stack size to a full page
x86/entry: Fixup bad_iret vs noinstr
objtool: Don't consider vmlinux a C-file
kasan: Fix required compiler version
compiler_attributes.h: Support no_sanitize_undefined check with GCC 4
x86/entry, bug: Comment the instrumentation_begin() usage for WARN()
x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*()
x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline()
compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr
kasan: Bump required compiler version
x86, kcsan: Add __no_kcsan to noinstr
kcsan: Remove __no_kcsan_or_inline
x86, kcsan: Remove __no_kcsan_or_inline usage
David Howells [Wed, 24 Jun 2020 16:00:24 +0000 (17:00 +0100)]
afs: Fix storage of cell names
The cell name stored in the afs_cell struct is a 64-char + NUL buffer -
when it needs to be able to handle up to AFS_MAXCELLNAME (256 chars) + NUL.
Fix this by changing the array to a pointer and allocating the string.
Found using Coverity.
Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 27 Jun 2020 22:24:04 +0000 (15:24 -0700)]
Merge tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Six cifs/smb3 fixes, three of them for stable.
Fixes xfstests 451, 313 and 316"
* tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: misc: Use array_size() in if-statement controlling expression
cifs: update ctime and mtime during truncate
cifs/smb3: Fix data inconsistent when punch hole
cifs/smb3: Fix data inconsistent when zero file range
cifs: Fix double add page to memcg when cifs_readpages
cifs: Fix cached_fid refcnt leak in open_shroot
Linus Torvalds [Sat, 27 Jun 2020 22:20:03 +0000 (15:20 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six small fixes, five in drivers and one to correct another minor
regression from cc97923a5bcc ("block: move dma drain handling to
scsi") where we still need the drain stub to be built in to the kernel
for the modular libata, non-modular SAS driver case"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mptscsih: Fix read sense data size
scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action
scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset()
scsi: libata: Fix the ata_scsi_dma_need_drain stub
scsi: qla2xxx: Keep initiator ports after RSCN
scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request
* tag 'vfio-v5.8-rc3' of git://github.com/awilliam/linux-vfio:
vfio/pci: Fix SR-IOV VF handling with MMIO blocking
vfio/type1: Fix migration info capability ID
vfio/pci: Clear error and request eventfd ctx after releasing
Linus Torvalds [Sat, 27 Jun 2020 22:15:37 +0000 (15:15 -0700)]
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"This contains a 5.8 regression fix for the Designware driver, a
register bitfield fix for the fsi driver, and a missing sanity check
for the I2C core"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: check returned size of emulated smbus block read
i2c: fsi: Fix the port number field in status register
i2c: designware: Adjust bus speed independently of ACPI
Linus Torvalds [Sat, 27 Jun 2020 20:14:15 +0000 (13:14 -0700)]
Merge tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are a small number of tiny staging driver fixes for 5.8-rc3.
Not much here, but there were some reported problems to be fixed:
- three wfx driver fixes
- rtl8723bs driver fix
All of these have been in linux-next with no reported issues"
* tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate()
staging: wfx: fix coherency of hif_scan() prototype
staging: wfx: drop useless loop
staging: wfx: fix AC priority
Linus Torvalds [Sat, 27 Jun 2020 20:12:10 +0000 (13:12 -0700)]
Merge tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.8-rc3 to resolve some reported
issues.
Nothing major here:
- gadget driver fixes
- cdns3 driver fixes
- xhci fixes
- renesas_usbhs driver fixes
- some new device support with ids
- documentation update
All of these have been in linux-next with no reported issues"
* tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
usb: renesas_usbhs: getting residue from callback_result
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
xhci: Poll for U0 after disabling USB2 LPM
xhci: Return if xHCI doesn't support LPM
usb: host: xhci-mtk: avoid runtime suspend when removing hcd
xhci: Fix enumeration issue when setting max packet size for FS devices.
xhci: Fix incorrect EP_STATE_MASK
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
usb: gadget: udc: Potential Oops in error handling code
usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe()
usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs
USB: ohci-sm501: Add missed iounmap() in remove
cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip
...
Linus Torvalds [Sat, 27 Jun 2020 20:10:31 +0000 (13:10 -0700)]
Merge tag 'char-misc-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Some tiny char/misc driver fixes for 5.8-rc3.
The "largest" changes are in the mei driver, to resolve some reported
problems and add some new device ids. There's also a binder bugfix, an
fpga driver build fix, and some assorted habanalabs fixes.
All of these, except for the habanalabs fixes, have been in linux-next
with no reported issues. The habanalabs driver changes showed up in my
tree on Friday, but as they are totally self-contained, all should be
good there"
* tag 'char-misc-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: increase h/w timer when checking idle
habanalabs: Correct handling when failing to enqueue CB
habanalabs: increase GAUDI QMAN ARB WDT timeout
habanalabs: rename mmu_write() to mmu_asid_va_write()
habanalabs: use PI in MMU cache invalidation
habanalabs: block scalar load_and_exe on external queue
mei: me: add tiger lake point device ids for H platforms.
mei: me: disable mei interface on Mehlow server platforms
binder: fix null deref of proc->context
fpga: zynqmp: fix modular build
Linus Torvalds [Sat, 27 Jun 2020 20:06:22 +0000 (13:06 -0700)]
Merge tag 'dma-mapping-5.8-4' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix dma coherent mmap in nommu (me)
- more AMD SEV fallout (David Rientjes, me)
- fix alignment in dma_common_*_remap (Eric Auger)
* tag 'dma-mapping-5.8-4' of git://git.infradead.org/users/hch/dma-mapping:
dma-remap: align the size in dma_common_*_remap()
dma-mapping: DMA_COHERENT_POOL should select GENERIC_ALLOCATOR
dma-direct: add missing set_memory_decrypted() for coherent mapping
dma-direct: check return value when encrypting or decrypting memory
dma-direct: re-encrypt memory if dma_direct_alloc_pages() fails
dma-direct: always align allocation size in dma_direct_alloc_pages()
dma-direct: mark __dma_direct_alloc_pages static
dma-direct: re-enable mmap for !CONFIG_MMU
Linus Torvalds [Sat, 27 Jun 2020 16:35:47 +0000 (09:35 -0700)]
Merge tag 'nfs-for-5.8-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"Stable Fixes:
- xprtrdma: Fix handling of RDMA_ERROR replies
- sunrpc: Fix rollback in rpc_gssd_dummy_populate()
- pNFS/flexfiles: Fix list corruption if the mirror count changes
- NFSv4: Fix CLOSE not waiting for direct IO completion
- SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
Other Fixes:
- xprtrdma: Fix a use-after-free with r_xprt->rx_ep
- Fix other xprtrdma races during disconnect
- NFS: Fix memory leak of export_path"
* tag 'nfs-for-5.8-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
NFSv4 fix CLOSE not waiting for direct IO compeletion
pNFS/flexfiles: Fix list corruption if the mirror count changes
nfs: Fix memory leak of export_path
sunrpc: fixed rollback in rpc_gssd_dummy_populate()
xprtrdma: Fix handling of RDMA_ERROR replies
xprtrdma: Clean up disconnect
xprtrdma: Clean up synopsis of rpcrdma_flush_disconnect()
xprtrdma: Use re_connect_status safely in rpcrdma_xprt_connect()
xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed
Linus Torvalds [Sat, 27 Jun 2020 16:02:49 +0000 (09:02 -0700)]
Merge tag 'io_uring-5.8-2020-06-26' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Three small fixes:
- Close a corner case for polled IO resubmission (Pavel)
- Toss commands when exiting (Pavel)
- Fix SQPOLL conditional reschedule on perpetually busy submit
(Xuan)"
* tag 'io_uring-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
io_uring: fix current->mm NULL dereference on exit
io_uring: fix hanging iopoll in case of -EAGAIN
io_uring: fix io_sq_thread no schedule when busy
- Use right allocator when freeing bip in error path (Chengguang)
* tag 'block-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
nvme-multipath: fix bogus request queue reference put
nvme-multipath: fix deadlock due to head->lock
nvme: don't protect ns mutation with ns->head->lock
nvme-multipath: fix deadlock between ana_work and scan_work
nvme: fix possible deadlock when I/O is blocked
nvme-rdma: assign completion vector correctly
nvme-loop: initialize tagset numa value to the value of the ctrl
nvme-tcp: initialize tagset numa value to the value of the ctrl
nvme-pci: initialize tagset numa value to the value of the ctrl
nvme-pci: override the value of the controller's numa node
nvme: set initial value for controller's numa node
block: release bip in a right way in error path
Linus Torvalds [Sat, 27 Jun 2020 15:57:16 +0000 (08:57 -0700)]
Merge tag 'for-5.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Quite a few DM zoned target fixes and a Zone append fix in DM core.
Considering the amount of dm-zoned changes that went in during the
5.8 merge window these fixes are not that surprising.
- A few DM writecache target fixes.
- A fix to Documentation index to include DM ebs target docs.
- Small cleanup to use struct_size() in DM core's retrieve_deps().
* tag 'for-5.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm writecache: add cond_resched to loop in persistent_memory_claim()
dm zoned: Fix reclaim zone selection
dm zoned: Fix random zone reclaim selection
dm: update original bio sector on Zone Append
dm zoned: Fix metadata zone size check
docs: device-mapper: add dm-ebs.rst to an index file
dm ioctl: use struct_size() helper in retrieve_deps()
dm writecache: skip writecache_wait when using pmem mode
dm writecache: correct uncommitted_block when discarding uncommitted entry
dm zoned: assign max_io_len correctly
dm zoned: fix uninitialized pointer dereference
Linus Torvalds [Sat, 27 Jun 2020 15:53:49 +0000 (08:53 -0700)]
Merge tag 'kgdb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb fixes from Daniel Thompson:
"The main change here is a fix for a number of unsafe interactions
between kdb and the console system. The fixes are specific to kdb
(pure kgdb debugging does not use the console system at all). On
systems with an NMI then kdb, if it is enabled, must get messages to
the user despite potentially running from some "difficult" calling
contexts. These fixes avoid using the console system where we have
been provided an alternative (safer) way to interact with the user
and, if using the console system in unavoidable, use oops_in_progress
for deadlock avoidance. These fixes also ensure kdb honours the
console enable flag.
Also included is a fix that wraps kgdb trap handling in an RCU read
lock to avoids triggering diagnostic warnings. This is a wide lock
scope but this is OK because kgdb is a stop-the-world debugger. When
we stop the world we put all the CPUs into holding pens and this
inhibits RCU update anyway"
* tag 'kgdb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb: Avoid suspicious RCU usage warning
kdb: Switch to use safer dbg_io_ops over console APIs
kdb: Make kdb_printf() console handling more robust
kdb: Check status of console prior to invoking handlers
kdb: Re-factor kdb_printf() message write code
Linus Torvalds [Sat, 27 Jun 2020 15:49:12 +0000 (08:49 -0700)]
Merge tag 'riscv-for-linus-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains a handful of fixes I'd like to target for rc3.
Most of them fix issues with the conversion of our vDSO to C. There is
also one fix to the SiFive PRCI driver that I picked up as it's
causing boot issues on the hardware.
- A fix to allow kernels with dynamic ftrace to use the vDSO.
- Some build fixes for the C vDSO functions.
- A fix to the PRCI driver's memory allocation, which was the cause
of some boot panics with FREELIST_RANDOM"
* tag 'riscv-for-linus-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup __vdso_gettimeofday broke dynamic ftrace
riscv: Add extern declarations for vDSO time-related functions
clk: sifive: allocate sufficient memory for struct __prci_data
riscv: Add -fPIC option to CFLAGS_vgettimeofday.o
Linus Torvalds [Sat, 27 Jun 2020 15:47:18 +0000 (08:47 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The big fix here is to our vDSO sigreturn trampoline as, after a
painfully long stint of debugging, it turned out that fixing some of
our CFI directives in the merge window lit up a bunch of logic in
libgcc which has been shown to SEGV in some cases during asynchronous
pthread cancellation.
It looks like we can fix this by extending the directives to restore
most of the interrupted register state from the sigcontext, but it's
risky and hard to test so we opted to remove the CFI directives for
now and rely on the unwinder fallback path like we used to.
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add KRYO{3,4}XX silver CPU cores to SSB safelist
arm64: perf: Report the PC value in REGS_ABI_32 mode
kselftest: arm64: Remove redundant clean target
arm64: kpti: Add KRYO{3, 4}XX silver CPU cores to kpti safelist
arm64: Don't insert a BTI instruction at inner labels
arm64: vdso: Don't use gcc plugins for building vgettimeofday.c
arm64: vdso: Only pass --no-eh-frame-hdr when linker supports it
arm64: Depend on newer binutils when building PAC
arm64: compat: Remove 32-bit sigreturn code from the vDSO
arm64: compat: Always use sigpage for sigreturn trampoline
arm64: compat: Allow 32-bit vdso and sigpage to co-exist
arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline
Linus Torvalds [Fri, 26 Jun 2020 19:33:48 +0000 (12:33 -0700)]
Merge tag 'acpi-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Prevent bypassing kernel lockdown via the ACPI tables loading
interface (Jason A. Donenfeld) and fix the handling of an ACPI sysfs
attribute (Nathan Chancellor)"
* tag 'acpi-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: sysfs: Fix pm_profile_attr type
ACPI: configfs: Disallow loading ACPI tables when locked down
Linus Torvalds [Fri, 26 Jun 2020 19:32:11 +0000 (12:32 -0700)]
Merge tag 'pm-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a recent regression that broke suspend-to-idle on some x86
systems, fix the intel_pstate driver to correctly let the platform
firmware control CPU performance in some cases and add __init
annotations to a couple of functions.
Specifics:
- Make sure that the _TIF_POLLING_NRFLAG is clear before entering the
last phase of suspend-to-idle to avoid wakeup issues on some x86
systems (Chen Yu, Rafael Wysocki).
- Cover one more case in which the intel_pstate driver should let the
platform firmware control the CPU frequency and refuse to load
(Srinivas Pandruvada).
- Add __init annotations to 2 functions in the power management core
(Christophe JAILLET)"
* tag 'pm-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Rearrange s2idle-specific idle state entry code
PM: sleep: core: mark 2 functions as __init to save some memory
cpufreq: intel_pstate: Add one more OOB control bit
PM: s2idle: Clear _TIF_POLLING_NRFLAG before suspend to idle
Linus Torvalds [Fri, 26 Jun 2020 19:30:07 +0000 (12:30 -0700)]
Merge tag 'iommu-fixes-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"A couple of Intel VT-d fixes:
- Make Intel SVM code 64bit only. The code uses pgd_t* and the IOMMU
only supports long-mode page-table formats, so its broken on 32bit
anyway.
- Make sure GFX quirks in for Intel VT-d are not applied to untrusted
devices. Those devices might gain full memory access otherwise.
- Identity mapping setup fix.
- Fix ACS enabling when Intel IOMMU is off and untrusted devices are
detected.
- Two smaller fixes for coherency and IO page-table setup"
* tag 'iommu-fixes-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix misuse of iommu_domain_identity_map()
iommu/vt-d: Update scalable mode paging structure coherency
iommu/vt-d: Enable PCI ACS for platform opt in hint
iommu/vt-d: Don't apply gfx quirks to untrusted devices
iommu/vt-d: Set U/S bit in first level page table by default
iommu/vt-d: Make Intel SVM code 64-bit only
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (31 commits)
MAINTAINERS: update info for sparse
mm/memory_hotplug.c: fix false softlockup during pfn range removal
mm: remove vmalloc_exec
arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page
x86/hyperv: allocate the hypercall page with only read and execute bits
mm/memory: fix IO cost for anonymous page
mm/swap: fix for "mm: workingset: age nonresident information alongside anonymous pages"
mm: workingset: age nonresident information alongside anonymous pages
doc: THP CoW fault no longer allocate THP
docs: mm/gup: minor documentation update
mm/memcontrol.c: prevent missed memory.low load tears
mm/memcontrol.c: add missed css_put()
mm: memcontrol: handle div0 crash race condition in memory.low
mm/vmalloc.c: fix a warning while make xmldocs
media: omap3isp: remove cacheflush.h
make asm-generic/cacheflush.h more standalone
mm/debug_vm_pgtable: fix build failure with powerpc 8xx
mm/memory.c: properly pte_offset_map_lock/unlock in vm_insert_pages()
mm: fix swap cache node allocation mask
slub: cure list_slab_objects() from double fix
...
Merge tag 'fpga-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
FPGA Manager fixes for 5.8-rc1
Here is one (late) fix for 5.8-rc1 merge window.
Arnd's change addresses a missing build dependency.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: zynqmp: fix modular build
Merge tag 'misc-habanalabs-fixes-2020-06-24' of git://people.freedesktop.org/~gabbayo/linux into char-misc-linus
Oded writes:
This tag contains the following fixes for kernel 5.8-rc2:
- close security hole in GAUDI command buffer parsing by blocking an
instruction that might allow user to run command buffer that wasn't
parsed on a secured engine.
- Fix bug in GAUDI MMU cache invalidation code.
- Rename a function to resolve conflict with a static inline function in
arch/m68k/include/asm/mcfmmu.h
- Increase watchdog timeout of GAUDI QMAN arbitration H/W to prevent false
reports on timeouts
- Fix bug of dereferencing NULL pointer when an error occurs during command
submission
- Increase H/W timer for checking if PDMA engine is IDLE in GAUDI.
* tag 'misc-habanalabs-fixes-2020-06-24' of git://people.freedesktop.org/~gabbayo/linux:
habanalabs: increase h/w timer when checking idle
habanalabs: Correct handling when failing to enqueue CB
habanalabs: increase GAUDI QMAN ARB WDT timeout
habanalabs: rename mmu_write() to mmu_asid_va_write()
habanalabs: use PI in MMU cache invalidation
habanalabs: block scalar load_and_exe on external queue
Merge tag 'fixes-for-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v5.8-rc2
A revert of Exynos5422 suspend clock support, it turns out it wasn't
ready to be merged. CDNS3 got a fix for test mode initialization.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'fixes-for-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
usb: gadget: udc: Potential Oops in error handling code
usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe()
usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
At times when I'm using kgdb I see a splat on my console about
suspicious RCU usage. I managed to come up with a case that could
reproduce this that looked like this:
If I understand properly we should just be able to blanket kgdb under
one big RCU read lock and the problem should go away. We'll add it to
the beast-of-a-function known as kgdb_cpu_enter().
With this I no longer get any splats and things seem to work fine.
Sumit Garg [Thu, 4 Jun 2020 10:01:19 +0000 (15:31 +0530)]
kdb: Switch to use safer dbg_io_ops over console APIs
In kgdb context, calling console handlers aren't safe due to locks used
in those handlers which could in turn lead to a deadlock. Although, using
oops_in_progress increases the chance to bypass locks in most console
handlers but it might not be sufficient enough in case a console uses
more locks (VT/TTY is good example).
Currently when a driver provides both polling I/O and a console then kdb
will output using the console. We can increase robustness by using the
currently active polling I/O driver (which should be lockless) instead
of the corresponding console. For several common cases (e.g. an
embedded system with a single serial port that is used both for console
output and debugger I/O) this will result in no console handler being
used.
In order to achieve this we need to reverse the order of preference to
use dbg_io_ops (uses polling I/O mode) over console APIs. So we just
store "struct console" that represents debugger I/O in dbg_io_ops and
while emitting kdb messages, skip console that matches dbg_io_ops
console in order to avoid duplicate messages. After this change,
"is_console" param becomes redundant and hence removed.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1591264879-25920-5-git-send-email-sumit.garg@linaro.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Chuck Lever [Thu, 25 Jun 2020 15:32:34 +0000 (11:32 -0400)]
SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
@subbuf is an output parameter of xdr_buf_subsegment(). A survey of
call sites shows that @subbuf is always uninitialized before
xdr_buf_segment() is invoked by callers.
There are some execution paths through xdr_buf_subsegment() that do
not set all of the fields in @subbuf, leaving some pointer fields
containing garbage addresses. Subsequent processing of that buffer
then results in a page fault.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
NFSv4 fix CLOSE not waiting for direct IO compeletion
Figuring out the root case for the REMOVE/CLOSE race and
suggesting the solution was done by Neil Brown.
Currently what happens is that direct IO calls hold a reference
on the open context which is decremented as an asynchronous task
in the nfs_direct_complete(). Before reference is decremented,
control is returned to the application which is free to close the
file. When close is being processed, it decrements its reference
on the open_context but since directIO still holds one, it doesn't
sent a close on the wire. It returns control to the application
which is free to do other operations. For instance, it can delete a
file. Direct IO is finally releasing its reference and triggering
an asynchronous close. Which races with the REMOVE. On the server,
REMOVE can be processed before the CLOSE, failing the REMOVE with
EACCES as the file is still opened.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Suggested-by: Neil Brown <neilb@suse.com> CC: stable@vger.kernel.org Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Trond Myklebust [Mon, 22 Jun 2020 19:04:15 +0000 (15:04 -0400)]
pNFS/flexfiles: Fix list corruption if the mirror count changes
If the mirror count changes in the new layout we pick up inside
ff_layout_pg_init_write(), then we can end up adding the
request to the wrong mirror and corrupting the mirror->pg_list.
Fixes: d600ad1f2bdb ("NFS41: pop some layoutget errors to application") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Tom Rix [Fri, 12 Jun 2020 22:45:49 +0000 (15:45 -0700)]
nfs: Fix memory leak of export_path
The try_location function is called within a loop by nfs_follow_referral.
try_location calls nfs4_pathname_string to created the export_path.
nfs4_pathname_string allocates the memory. export_path is stored in the
nfs_fs_context/fs_context structure similarly as hostname and source.
But whereas the ctx hostname and source are freed before assignment,
export_path is not. So if there are multiple loops, the new export_path
will overwrite the old without the old being freed.
So call kfree for export_path.
Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Vasily Averin [Mon, 1 Jun 2020 08:54:57 +0000 (11:54 +0300)]
sunrpc: fixed rollback in rpc_gssd_dummy_populate()
__rpc_depopulate(gssd_dentry) was lost on error path
cc: stable@vger.kernel.org Fixes: commit 4b9a445e3eeb ("sunrpc: create a new dummy pipe for gssd to hold open") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Mans Rullgard [Sat, 13 Jun 2020 10:41:09 +0000 (11:41 +0100)]
i2c: core: check returned size of emulated smbus block read
If the i2c bus driver ignores the I2C_M_RECV_LEN flag (as some of
them do), it is possible for an I2C_SMBUS_BLOCK_DATA read issued
on some random device to return an arbitrary value in the first
byte (and nothing else). When this happens, i2c_smbus_xfer_emulated()
will happily write past the end of the supplied data buffer, thus
causing Bad Things to happen. To prevent this, check the size
before copying the data block and return an error if it is too large.
Fixes: 209d27c3b167 ("i2c: Emulate SMBus block read over I2C") Signed-off-by: Mans Rullgard <mans@mansr.com>
[wsa: use better errno] Signed-off-by: Wolfram Sang <wsa@kernel.org>
Ben Widawsky [Fri, 26 Jun 2020 03:30:51 +0000 (20:30 -0700)]
mm/memory_hotplug.c: fix false softlockup during pfn range removal
When working with very large nodes, poisoning the struct pages (for which
there will be very many) can take a very long time. If the system is
using voluntary preemptions, the software watchdog will not be able to
detect forward progress. This patch addresses this issue by offering to
give up time like __remove_pages() does. This behavior was introduced in
v5.6 with: commit d33695b16a9f ("mm/memory_hotplug: poison memmap in
remove_pfn_range_from_zone()")
Alternately, init_page_poison could do this cond_resched(), but it seems
to me that the caller of init_page_poison() is what actually knows whether
or not it should relax its own priority.
Based on Dan's notes, I think this is perfectly safe: commit f931ab479dd2
("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}")
Aside from fixing the lockup, it is also a friendlier thing to do on lower
core systems that might wipe out large chunks of hotplug memory (probably
not a very common case).
Fixes this kind of splat:
watchdog: BUG: soft lockup - CPU#46 stuck for 22s! [daxctl:9922]
irq event stamp: 138450
hardirqs last enabled at (138449): [<ffffffffa1001f26>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (138450): [<ffffffffa1001f42>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last enabled at (138448): [<ffffffffa1e00347>] __do_softirq+0x347/0x456
softirqs last disabled at (138443): [<ffffffffa10c416d>] irq_exit+0x7d/0xb0
CPU: 46 PID: 9922 Comm: daxctl Not tainted 5.7.0-BEN-14238-g373c6049b336 #30
Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYXCRB1.86B.0578.D07.1902280810 02/28/2019
RIP: 0010:memset_erms+0x9/0x10
Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01
Call Trace:
remove_pfn_range_from_zone+0x3a/0x380
memunmap_pages+0x17f/0x280
release_nodes+0x22a/0x260
__device_release_driver+0x172/0x220
device_driver_detach+0x3e/0xa0
unbind_store+0x113/0x130
kernfs_fop_write+0xdc/0x1c0
vfs_write+0xde/0x1d0
ksys_write+0x58/0xd0
do_syscall_64+0x5a/0x120
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Built 2 zonelists, mobility grouping on. Total pages: 49050381
Policy zone: Normal
Built 3 zonelists, mobility grouping on. Total pages: 49312525
Policy zone: Normal
David said: "It really only is an issue for devmem. Ordinary
hotplugged system memory is not affected (onlined/offlined in memory
block granularity)."
Link: http://lkml.kernel.org/r/20200619231213.1160351-1-ben.widawsky@intel.com Fixes: commit d33695b16a9f ("mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()") Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: "Scargall, Steve" <steve.scargall@intel.com> Reported-by: Ben Widawsky <ben.widawsky@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge vmalloc_exec into its only caller. Note that for !CONFIG_MMU
__vmalloc_node_range maps to __vmalloc, which directly clears the
__GFP_HIGHMEM added by the vmalloc_exec stub anyway.
Link: http://lkml.kernel.org/r/20200618064307.32739-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
x86/hyperv: allocate the hypercall page with only read and execute bits
Patch series "fix a hyperv W^X violation and remove vmalloc_exec"
Dexuan reported a W^X violation due to the fact that the hyper hypercall
page due switching it to be allocated using vmalloc_exec.
The problem is that PAGE_KERNEL_EXEC as used by vmalloc_exec actually
sets writable permissions in the pte. This series fixes the issue by
switching to the low-level __vmalloc_node_range interface that allows
specifing more detailed permissions instead. It then also open codes
the other two callers and removes the somewhat confusing vmalloc_exec
interface.
Peter noted that the hyper hypercall page allocation also has another
long standing issue in that it shouldn't use the full vmalloc but just
the module space. This issue is so far theoretical as the allocation is
done early in the boot process. I plan to fix it with another bigger
series for 5.9.
This patch (of 3):
Avoid a W^X violation cause by the fact that PAGE_KERNEL_EXEC includes
the writable bit.
For this resurrect the removed PAGE_KERNEL_RX definition, but as
PAGE_KERNEL_ROX to match arm64 and powerpc.
Link: http://lkml.kernel.org/r/20200618064307.32739-2-hch@lst.de Fixes: 78bb17f76edc ("x86/hyperv: use vmalloc_exec for the hypercall page") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Dexuan Cui <decui@microsoft.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Fri, 26 Jun 2020 03:30:37 +0000 (20:30 -0700)]
mm/memory: fix IO cost for anonymous page
With synchronous IO swap device, swap-in is directly handled in fault
code. Since IO cost notation isn't added there, with synchronous IO
swap device, LRU balancing could be wrongly biased. Fix it to count it
in fault code.
Link: http://lkml.kernel.org/r/1592288204-27734-4-git-send-email-iamjoonsoo.kim@lge.com Fixes: 314b57fb0460001 ("mm: balance LRU lists based on relative thrashing cache sizing") Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Fri, 26 Jun 2020 03:30:34 +0000 (20:30 -0700)]
mm/swap: fix for "mm: workingset: age nonresident information alongside anonymous pages"
Non-file-lru page could also be activated in mark_page_accessed() and we
need to count this activation for nonresident_age.
Note that it's better for this patch to be squashed into the patch "mm:
workingset: age nonresident information alongside anonymous pages".
Link: http://lkml.kernel.org/r/1592288204-27734-3-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
And, the other two are minor things which are found when I try to rebase
my patchset.
This patch (of 3):
After ("mm: workingset: let cache workingset challenge anon fix"), we
compare refault distances to active_file + anon. But age of the
non-resident information is only driven by the file LRU. As a result,
we may overestimate the recency of any incoming refaults and activate
them too eagerly, causing unnecessary LRU churn in certain situations.
Make anon aging drive nonresident age as well to address that.
Yang Shi [Fri, 26 Jun 2020 03:30:28 +0000 (20:30 -0700)]
doc: THP CoW fault no longer allocate THP
Since commit 3917c80280c9 ("thp: change CoW semantics for anon-THP"),
THP CoW page fault is rewritten. Now it just splits pmd then fallback
to base page fault, it doesn't try to allocate THP anymore. So it is no
longer counted in THP_FAULT_ALLOC.
Remove the obsolete statement in documentation about THP CoW allocation
to avoid confusion.
Link: http://lkml.kernel.org/r/1592424895-5421-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Looks like one of these got missed when massaging in f86b810c2610 ("mm,
memcg: prevent memory.low load/store tearing") with other linux-mm
changes.
Link: http://lkml.kernel.org/r/20200612174437.GA391453@chrisdown.name Signed-off-by: Chris Down <chris@chrisdown.name> Reported-by: Michal Koutny <mkoutny@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This happens when parent_usage == siblings_protected.
We check that usage is bigger than protected, which should imply
parent_usage being bigger than siblings_protected. However, we don't
read (or even update) these values atomically, and they can be out of
sync as the memory state changes under us. A bit of fluctuation around
the target protection isn't a big deal, but we need to handle the div0
case.
Check the parent state explicitly to make sure we have a reasonable
positive value for the divisor.
Link: http://lkml.kernel.org/r/20200615140658.601684-1-hannes@cmpxchg.org Fixes: 8a931f801340 ("mm: memcontrol: recursive memory.low protection") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Chris Down <chris@chrisdown.name> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After mm.h was removed from the asm-generic version of cacheflush.h,
s390 allyesconfig shows several warnings of the following nature:
In file included from arch/s390/include/generated/asm/cacheflush.h:1,
from drivers/media/platform/omap3isp/isp.c:42:
include/asm-generic/cacheflush.h:16:42: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration
As Geert and Laurent point out, this driver does not need this header in
the two files that include it. Remove it so there are no warnings.
Stephen Rothwell [Fri, 26 Jun 2020 03:30:07 +0000 (20:30 -0700)]
make asm-generic/cacheflush.h more standalone
Some s390 builds get these warnings:
include/asm-generic/cacheflush.h:16:42: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/cacheflush.h:22:46: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/cacheflush.h:28:45: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/cacheflush.h:36:44: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/cacheflush.h:44:45: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/cacheflush.h:52:50: warning: 'struct address_space' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/cacheflush.h:58:52: warning: 'struct address_space' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/cacheflush.h:75:17: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/cacheflush.h:74:45: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/cacheflush.h:82:16: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/cacheflush.h:81:50: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
Forward declare the named structs to get rid of these.
Link: http://lkml.kernel.org/r/20200623135714.4dae4b8a@canb.auug.org.au Fixes: e0cf615d725c ("asm-generic: don't include <linux/mm.h> in cacheflush.h") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christophe Leroy [Fri, 26 Jun 2020 03:30:04 +0000 (20:30 -0700)]
mm/debug_vm_pgtable: fix build failure with powerpc 8xx
Since commit 9e343b467c70 ("READ_ONCE: Enforce atomicity for
{READ,WRITE}_ONCE() memory accesses"), READ_ONCE() cannot be used
anymore to read complex page table entries.
This leads to:
CC mm/debug_vm_pgtable.o
In file included from ./include/asm-generic/bug.h:5,
from ./arch/powerpc/include/asm/bug.h:109,
from ./include/linux/bug.h:5,
from ./include/linux/mmdebug.h:5,
from ./include/linux/gfp.h:5,
from mm/debug_vm_pgtable.c:13:
In function 'pte_clear_tests',
inlined from 'debug_vm_pgtable' at mm/debug_vm_pgtable.c:363:2:
./include/linux/compiler.h:392:38: error: Unsupported access size for {READ,WRITE}_ONCE().
mm/debug_vm_pgtable.c:249:14: note: in expansion of macro 'READ_ONCE'
249 | pte_t pte = READ_ONCE(*ptep);
| ^~~~~~~~~
make[2]: *** [mm/debug_vm_pgtable.o] Error 1
Fix it by using the recently added ptep_get() helper.
Link: http://lkml.kernel.org/r/6ca8c972e6c920dc4ae0d4affbed9703afa4d010.1592490570.git.christophe.leroy@csgroup.eu Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjun Roy [Fri, 26 Jun 2020 03:30:01 +0000 (20:30 -0700)]
mm/memory.c: properly pte_offset_map_lock/unlock in vm_insert_pages()
Calls to pte_offset_map() in vm_insert_pages() are erroneously not
matched with a call to pte_unmap(). This would cause problems on
architectures where that is not a no-op.
This patch does away with the non-traditional locking in the existing
code, and instead uses pte_offset_map_lock/unlock() as usual,
incrementing PTE as necessary. The PTE pointer is kept within bounds
since we clamp it with PTRS_PER_PTE.
Link: http://lkml.kernel.org/r/20200618220446.20284-1-arjunroy.kdev@gmail.com Fixes: 8cd3984d81d5 ("mm/memory.c: add vm_insert_pages()") Signed-off-by: Arjun Roy <arjunroy@google.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 26 Jun 2020 03:29:59 +0000 (20:29 -0700)]
mm: fix swap cache node allocation mask
Chris Murphy reports that a slightly overcommitted load, testing swap
and zram along with i915, splats and keeps on splatting, when it had
better fail less noisily:
Reported on 5.7, but it goes back really to 3.1: when
shmem_read_mapping_page_gfp() was implemented for use by i915, and
allowed for __GFP_NORETRY and __GFP_NOWARN flags in most places, but
missed swapin's "& GFP_KERNEL" mask for page tree node allocation in
__read_swap_cache_async() - that was to mask off HIGHUSER_MOVABLE bits
from what page cache uses, but GFP_RECLAIM_MASK is now what's needed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208085 Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2006151330070.11064@eggly.anvils Fixes: 68da9f055755 ("tmpfs: pass gfp to shmem_getpage_gfp") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: Chris Murphy <lists@colorremedies.com> Analyzed-by: Vlastimil Babka <vbabka@suse.cz> Analyzed-by: Matthew Wilcox <willy@infradead.org> Tested-by: Chris Murphy <lists@colorremedies.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
According to Christopher Lameter two fixes have been merged for the same
problem. As far as I can tell, the code does not acquire the list_lock
and invoke kmalloc(). list_slab_objects() misses an unlock (the
counterpart to get_map()) and the memory allocated in free_partial()
isn't used.
Revert the mentioned commit.
Link: http://lkml.kernel.org/r/20200618201234.795692-1-bigeasy@linutronix.de Fixes: aa456c7aebb14 ("slub: remove kmalloc under list_lock from list_slab_objects() V2") Link: https://lkml.kernel.org/r/alpine.DEB.2.22.394.2006181501480.12014@www.lameter.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiman Long [Fri, 26 Jun 2020 03:29:52 +0000 (20:29 -0700)]
mm/slab: use memzero_explicit() in kzfree()
The kzfree() function is normally used to clear some sensitive
information, like encryption keys, in the buffer before freeing it back to
the pool. Memset() is currently used for buffer clearing. However
unlikely, there is still a non-zero probability that the compiler may
choose to optimize away the memory clearing especially if LTO is being
used in the future.
To make sure that this optimization will never happen,
memzero_explicit(), which is introduced in v3.18, is now used in
kzfree() to future-proof it.
Link: http://lkml.kernel.org/r/20200616154311.12314-2-longman@redhat.com Fixes: 3ef0e5ba4673 ("slab: introduce kzfree()") Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Howells <dhowells@redhat.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The mod_lruvec_state() function will eventually call the
__mod_zone_page_state() which accepts a long argument. Depending on the
compiler and how inlining is done, "-nr_pages" may be treated as a
negative number or a very large positive number. Apparently, it was
treated as a large positive number in that PowerPC system leading to
incorrect stat counts. This problem hasn't been seen in x86-64 yet,
perhaps the gcc compiler there has some slight difference in behavior.
It is fixed by making nr_pages a signed value. For consistency, a similar
change is applied to memcg_charge_slab() as well.
Link: http://lkml.kernel.org/r/20200620184719.10994-1-longman@redhat.com Fixes: 9c315e4d7d8c ("mm: memcg/slab: cache page number in memcg_(un)charge_slab()"). Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Fri, 26 Jun 2020 03:29:43 +0000 (20:29 -0700)]
lib: fix test_hmm.c reference after free
Coccinelle scripts report the following errors:
lib/test_hmm.c:523:20-26: ERROR: reference preceded by free on line 521
lib/test_hmm.c:524:21-27: ERROR: reference preceded by free on line 521
lib/test_hmm.c:523:28-35: ERROR: devmem is NULL but dereferenced.
lib/test_hmm.c:524:29-36: ERROR: devmem is NULL but dereferenced.
Fix these by using the local variable 'res' instead of devmem.
Link: http://lkml.kernel.org/r/c845c158-9c65-9665-0d0b-00342846dd07@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Fri, 26 Jun 2020 03:29:40 +0000 (20:29 -0700)]
ocfs2: fix value of OCFS2_INVALID_SLOT
In the ocfs2 disk layout, slot number is 16 bits, but in ocfs2
implementation, slot number is 32 bits. Usually this will not cause any
issue, because slot number is converted from u16 to u32, but
OCFS2_INVALID_SLOT was defined as -1, when an invalid slot number from
disk was obtained, its value was (u16)-1, and it was converted to u32.
Then the following checking in get_local_system_inode will be always
skipped:
Link: http://lkml.kernel.org/r/20200616183829.87211-5-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Fri, 26 Jun 2020 03:29:37 +0000 (20:29 -0700)]
ocfs2: fix panic on nfs server over ocfs2
The following kernel panic was captured when running nfs server over
ocfs2, at that time ocfs2_test_inode_bit() was checking whether one
inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its
"suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from
//global_inode_alloc, but here it wrongly assumed that it was got from per
slot inode alloctor which would cause array overflow and trigger kernel
panic.
Link: http://lkml.kernel.org/r/20200616183829.87211-4-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Fri, 26 Jun 2020 03:29:33 +0000 (20:29 -0700)]
ocfs2: load global_inode_alloc
Set global_inode_alloc as OCFS2_FIRST_ONLINE_SYSTEM_INODE, that will
make it load during mount. It can be used to test whether some
global/system inodes are valid. One use case is that nfsd will test
whether root inode is valid.
Link: http://lkml.kernel.org/r/20200616183829.87211-3-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Fri, 26 Jun 2020 03:29:30 +0000 (20:29 -0700)]
ocfs2: avoid inode removal while nfsd is accessing it
Patch series "ocfs2: fix nfsd over ocfs2 issues", v2.
This is a series of patches to fix issues on nfsd over ocfs2. patch 1
is to avoid inode removed while nfsd access it patch 2 & 3 is to fix a
panic issue.
This patch (of 4):
When nfsd is getting file dentry using handle or parent dentry of some
dentry, one cluster lock is used to avoid inode removed from other node,
but it still could be removed from local node, so use a rw lock to avoid
this.
Link: http://lkml.kernel.org/r/20200616183829.87211-1-junxiao.bi@oracle.com Link: http://lkml.kernel.org/r/20200616183829.87211-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lianbo Jiang [Fri, 26 Jun 2020 03:29:27 +0000 (20:29 -0700)]
kexec: do not verify the signature without the lockdown or mandatory signature
Signature verification is an important security feature, to protect
system from being attacked with a kernel of unknown origin. Kexec
rebooting is a way to replace the running kernel, hence need be secured
carefully.
In the current code of handling signature verification of kexec kernel,
the logic is very twisted. It mixes signature verification, IMA
signature appraising and kexec lockdown.
If there is no KEXEC_SIG_FORCE, kexec kernel image doesn't have one of
signature, the supported crypto, and key, we don't think this is wrong,
Unless kexec lockdown is executed. IMA is considered as another kind of
signature appraising method.
If kexec kernel image has signature/crypto/key, it has to go through the
signature verification and pass. Otherwise it's seen as verification
failure, and won't be loaded.
Seems kexec kernel image with an unqualified signature is even worse
than those w/o signature at all, this sounds very unreasonable. E.g.
If people get a unsigned kernel to load, or a kernel signed with expired
key, which one is more dangerous?
So, here, let's simplify the logic to improve code readability. If the
KEXEC_SIG_FORCE enabled or kexec lockdown enabled, signature
verification is mandated. Otherwise, we lift the bar for any kernel
image.
Link: http://lkml.kernel.org/r/20200602045952.27487-1-lijiang@redhat.com Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Reviewed-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Dave Young <dyoung@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Matthew Garrett <mjg59@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Fri, 26 Jun 2020 03:29:24 +0000 (20:29 -0700)]
mm, compaction: make capture control handling safe wrt interrupts
Hugh reports:
"While stressing compaction, one run oopsed on NULL capc->cc in
__free_one_page()'s task_capc(zone): compact_zone_order() had been
interrupted, and a page was being freed in the return from interrupt.
Though you would not expect it from the source, both gccs I was using
(4.8.1 and 7.5.0) had chosen to compile compact_zone_order() with the
".cc = &cc" implemented by mov %rbx,-0xb0(%rbp) immediately before
callq compact_zone - long after the "current->capture_control =
&capc". An interrupt in between those finds capc->cc NULL (zeroed by
an earlier rep stos).
This could presumably be fixed by a barrier() before setting
current->capture_control in compact_zone_order(); but would also need
more care on return from compact_zone(), in order not to risk leaking
a page captured by interrupt just before capture_control is reset.
Maybe that is the preferable fix, but I felt safer for task_capc() to
exclude the rather surprising possibility of capture at interrupt
time"
I have checked that gcc10 also behaves the same.
The advantage of fix in compact_zone_order() is that we don't add
another test in the page freeing hot path, and that it might prevent
future problems if we stop exposing pointers to uninitialized structures
in current task.
So this patch implements the suggestion for compact_zone_order() with
barrier() (and WRITE_ONCE() to prevent store tearing) for setting
current->capture_control, and prevents page leaking with
WRITE_ONCE/READ_ONCE in the proper order.
Link: http://lkml.kernel.org/r/20200616082649.27173-1-vbabka@suse.cz Fixes: 5e1f0f098b46 ("mm, compaction: capture a page under direct compaction") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Hugh Dickins <hughd@google.com> Suggested-by: Hugh Dickins <hughd@google.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Li Wang <liwang@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [5.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 26 Jun 2020 03:29:21 +0000 (20:29 -0700)]
mm: do_swap_page(): fix up the error code
do_swap_page() returns error codes from the VM_FAULT* space. try_charge()
might return -ENOMEM, though, and then do_swap_page() simply returns 0
which means a success.
We almost never return ENOMEM for GFP_KERNEL single page charge. Except
for async OOM handling (oom_disabled v1). So this needs translation to
VM_FAULT_OOM otherwise the the page fault path will not notify the
userspace and wait for an action.
Link: http://lkml.kernel.org/r/20200617090238.GL9499@dhcp22.suse.cz Fixes: 4c6355b25e8b ("mm: memcontrol: charge swapin pages on instantiation") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stafford Horne [Fri, 26 Jun 2020 03:29:17 +0000 (20:29 -0700)]
openrisc: fix boot oops when DEBUG_VM is enabled
Since v5.8-rc1 OpenRISC Linux fails to boot when DEBUG_VM is enabled.
This has been bisected to commit 42fc541404f2 ("mmap locking API: add
mmap_assert_locked() and mmap_assert_write_locked()").
The added locking checks exposed the issue that OpenRISC was not taking
this mmap lock when during page walks for DMA operations. This patch
locks and unlocks the mmap lock for page walking.
Link: http://lkml.kernel.org/r/20200617090247.1680188-1-shorne@gmail.com Fixes: 42fc541404f2 ("mmap locking API: add mmap_assert_locked() and mmap_assert_write_locked()" Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Michel Lespinasse <walken@google.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Steven Price <steven.price@arm.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Harish [Thu, 25 Jun 2020 16:57:21 +0000 (22:27 +0530)]
selftests/powerpc: Fix build failure in ebb tests
We use OUTPUT directory as TMPOUT for checking no-pie option.
Since commit f2f02ebd8f38 ("kbuild: improve cc-option to clean up all
temporary files") when building powerpc/ from selftests directory, the
OUTPUT directory points to powerpc/pmu/ebb/ and gets removed when
checking for -no-pie option in try-run routine, subsequently build
fails with the following:
$ make -C powerpc
...
TARGET=ebb; BUILD_TARGET=$OUTPUT/$TARGET; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C $TARGET all
make[2]: Entering directory '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb'
make[2]: *** No rule to make target 'Makefile'.
make[2]: Failed to remake makefile 'Makefile'.
make[2]: *** No rule to make target 'ebb.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'ebb_handler.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'trace.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'busy_loop.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: Target 'all' not remade because of errors.
Fix this by adding a suffix to the OUTPUT directory so that the
failure is avoided.
Fixes: 9686813f6e9d ("selftests/powerpc: Fix try-run when source tree is not writable") Signed-off-by: Harish <harish@linux.ibm.com>
[mpe: Mention that commit that triggered the breakage] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200625165721.264904-1-harish@linux.ibm.com
1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.
2) The default crypto algorithm selection in Kconfig for IPSEC is out
of touch with modern reality, fix this up. From Eric Biggers.
3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
Nakryiko.
4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
Hangbin Liu.
5) Adjust packet alignment handling in ax88179_178a driver to match
what the hardware actually does. From Jeremy Kerr.
6) register_netdevice can leak in the case one of the notifiers fail,
from Yang Yingliang.
7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.
8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
Oltean.
9) tg3 driver can sleep forever when we get enough EEH errors, fix from
David Christensen.
10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
drivers, from Ciara Loftus.
11) Fix scanning loop break condition in of_mdiobus_register(), from
Florian Fainelli.
12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.
13) Endianness fix in mlxsw, from Ido Schimmel.
14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.
15) Missing bridge mrp configuration validation, from Horatiu Vultur.
16) Fix circular netns references in wireguard, from Jason A. Donenfeld.
17) PTP initialization on recovery is not done properly in qed driver,
from Alexander Lobakin.
18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
from Rahul Lakkireddy.
19) Don't clear bound device TX queue of socket prematurely otherwise we
get problems with ktls hw offloading, from Tariq Toukan.
20) ipset can do atomics on unaligned memory, fix from Russell King.
21) Align ethernet addresses properly in bridging code, from Thomas
Martitz.
22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
from Marcelo Ricardo Leitner.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
rds: transport module should be auto loaded when transport is set
sch_cake: fix a few style nits
sch_cake: don't call diffserv parsing code when it is not needed
sch_cake: don't try to reallocate or unshare skb unconditionally
ethtool: fix error handling in linkstate_prepare_data()
wil6210: account for napi_gro_receive never returning GRO_DROP
hns: do not cast return value of napi_gro_receive to null
socionext: account for napi_gro_receive never returning GRO_DROP
wireguard: receive: account for napi_gro_receive never returning GRO_DROP
vxlan: fix last fdb index during dump of fdb with nhid
sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
tc-testing: avoid action cookies with odd length.
bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
net: dsa: sja1105: fix tc-gate schedule with single element
net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
net: dsa: sja1105: unconditionally free old gating config
net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
net: macb: free resources on failure path of at91ether_open()
net: macb: call pm_runtime_put_sync on failure path
...
====================
sched: A couple of fixes for sch_cake
This series contains a couple of fixes for diffserv handling in sch_cake that
provide a nice speedup (with a somewhat pedantic nit fix tacked on to the end).
Not quite sure about whether this should go to stable; it does provide a nice
speedup, but it's not strictly a fix in the "correctness" sense. I lean towards
including this in stable as well, since our most important consumer of that
(OpenWrt) is likely to backport the series anyway.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
I spotted a few nits when comparing the in-tree version of sch_cake with
the out-of-tree one: A redundant error variable declaration shadowing an
outer declaration, and an indentation alignment issue. Fix both of these.
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sch_cake: don't call diffserv parsing code when it is not needed
As a further optimisation of the diffserv parsing codepath, we can skip it
entirely if CAKE is configured to neither use diffserv-based
classification, nor to zero out the diffserv bits.
Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilya Ponetayev [Thu, 25 Jun 2020 20:12:07 +0000 (22:12 +0200)]
sch_cake: don't try to reallocate or unshare skb unconditionally
cake_handle_diffserv() tries to linearize mac and network header parts of
skb and to make it writable unconditionally. In some cases it leads to full
skb reallocation, which reduces throughput and increases CPU load. Some
measurements of IPv4 forward + NAPT on MIPS router with 580 MHz single-core
CPU was conducted. It appears that on kernel 4.9 skb_try_make_writable()
reallocates skb, if skb was allocated in ethernet driver via so-called
'build skb' method from page cache (it was discovered by strange increase
of kmalloc-2048 slab at first).
Obtain DSCP value via read-only skb_header_pointer() call, and leave
linearization only for DSCP bleaching or ECN CE setting. And, as an
additional optimisation, skip diffserv parsing entirely if it is not needed
by the current configuration.
Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits") Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
[ fix a few style issues, reflow commit message ] Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubecek [Wed, 24 Jun 2020 22:09:08 +0000 (00:09 +0200)]
ethtool: fix error handling in linkstate_prepare_data()
When getting SQI or maximum SQI value fails in linkstate_prepare_data(), we
must not return without calling ethnl_ops_complete(dev) as that could
result in imbalance between ethtool_ops ->begin() and ->complete() calls.
Fixes: 806602191592 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 25 Jun 2020 23:16:49 +0000 (16:16 -0700)]
Merge tag 'trace-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Four small fixes:
- Fix a ringbuffer bug for nested events having time go backwards
- Fix a config dependency for boot time tracing to depend on
synthetic events instead of histograms.
- Fix trigger format parsing to handle multiple spaces
- Fix bootconfig to handle failures in multiple events"
* tag 'trace-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/boottime: Fix kprobe multiple events
tracing: Fix event trigger to accept redundant spaces
tracing/boot: Fix config dependency for synthedic event
ring-buffer: Zero out time extend if it is nested and not absolute
====================
napi_gro_receive caller return value cleanups
In 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in
napi_gro_receive()"), the GRO_NORMAL case stopped calling
netif_receive_skb_internal, checking its return value, and returning
GRO_DROP in case it failed. Instead, it calls into
netif_receive_skb_list_internal (after a bit of indirection), which
doesn't return any error. Therefore, napi_gro_receive will never return
GRO_DROP, making handling GRO_DROP dead code.
I emailed the author of 6570bc79c0df on netdev [1] to see if this change
was intentional, but the dlink.ru email address has been disconnected,
and looking a bit further myself, it seems somewhat infeasible to start
propagating return values backwards from the internal machinations of
netif_receive_skb_list_internal.
Taking a look at all the callers of napi_gro_receive, it appears that
three are checking the return value for the purpose of comparing it to
the now never-happening GRO_DROP, and one just casts it to (void), a
likely historical leftover. Every other of the 120 callers does not
bother checking the return value.
And it seems like these remaining 116 callers are doing the right thing:
after calling napi_gro_receive, the packet is now in the hands of the
upper layers of the newtworking, and the device driver itself has no
business now making decisions based on what the upper layers choose to
do. Incrementing stats counters on GRO_DROP seems like a mistake, made
by these three drivers, but not by the remaining 117.
It would seem, therefore, that after rectifying these four callers of
napi_gro_receive, that I should go ahead and just remove returning the
value from napi_gro_receive all together. However, napi_gro_receive has
a function event tracer, and being able to introspect into the
networking stack to see how often napi_gro_receive is returning whatever
interesting GRO status (aside from _DROP) remains an interesting
data point worth keeping for debugging.
So, this series simply gets rid of the return value checking for the
four useless places where that check never evaluates to anything
meaningful.
wil6210: account for napi_gro_receive never returning GRO_DROP
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands. In this case, too, the non-gro path didn't bother checking
the return value. Plus, this had some clunky debugging functions that
duplicated code from elsewhere and was generally pretty messy. So, this
commit cleans that all up too.
Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
socionext: account for napi_gro_receive never returning GRO_DROP
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.
Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wireguard: receive: account for napi_gro_receive never returning GRO_DROP
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Wed, 24 Jun 2020 21:02:36 +0000 (14:02 -0700)]
vxlan: fix last fdb index during dump of fdb with nhid
This patch fixes last saved fdb index in fdb dump handler when
handling fdb's with nhid.
Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
If a socket is set ipv6only, it will still send IPv4 addresses in the
INIT and INIT_ACK packets. This potentially misleads the peer into using
them, which then would cause association termination.
The fix is to not add IPv4 addresses to ipv6only sockets.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Briana Oursler [Wed, 24 Jun 2020 19:29:14 +0000 (12:29 -0700)]
tc-testing: avoid action cookies with odd length.
Update odd length cookie hexstrings in csum.json, tunnel_key.json and
bpf.json to be even length to comply with check enforced in commit 0149dabf2a1b ("tc: m_actions: check cookie hexstring len") in iproute2.
Signed-off-by: Briana Oursler <briana.oursler@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
tcp_cubic: fix spurious HYSTART_DELAY on RTT decrease
This series fixes a long-standing bug in the TCP CUBIC
HYSTART_DELAY mechanim recently reported by Mirja Kuehlewind. The
code can cause a spurious exit of slow start in some particular
cases: upon an RTT decrease that happens on the 9th or later ACK
in a round trip. This series fixes the original Hystart code and
also the recent BPF implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Wed, 24 Jun 2020 16:42:03 +0000 (12:42 -0400)]
bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
Apply the fix from:
"tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT"
to the BPF implementation of TCP CUBIC congestion control.
Repeating the commit description here for completeness:
Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:
o The first 8 RTT samples in a round trip are 150ms, resulting in a
curr_rtt of 150ms and a delay_min of 150ms.
o The 9th RTT sample is 100ms. The curr_rtt does not change after the
first 8 samples, so curr_rtt remains 150ms. But delay_min can be
lowered at any time, so delay_min falls to 100ms. The code executes
the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
of 100ms, and the curr_rtt is declared far enough above delay_min to
force a (spurious) exit of Slow start.
The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.
Fixes: 6de4a9c430b5 ("bpf: tcp: Add bpf_cubic example") Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Wed, 24 Jun 2020 16:42:02 +0000 (12:42 -0400)]
tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:
o The first 8 RTT samples in a round trip are 150ms, resulting in a
curr_rtt of 150ms and a delay_min of 150ms.
o The 9th RTT sample is 100ms. The curr_rtt does not change after the
first 8 samples, so curr_rtt remains 150ms. But delay_min can be
lowered at any time, so delay_min falls to 100ms. The code executes
the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
of 100ms, and the curr_rtt is declared far enough above delay_min to
force a (spurious) exit of Slow start.
The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.
Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3") Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Fixes for SJA1105 DSA tc-gate action
This small series fixes 2 bugs in the tc-gate implementation:
1. The TAS state machine keeps getting rescheduled even after removing
tc-gate actions on all ports.
2. tc-gate actions with only one gate control list entry are installed
to hardware with an incorrect interval of zero, which makes the
switch erroneously drop those packets (since the configuration is
invalid).
To keep the code palatable, a forward-declaration was avoided by moving
some code around in patch 1/4. I hope that isn't too much of an issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 24 Jun 2020 13:54:47 +0000 (16:54 +0300)]
net: dsa: sja1105: fix tc-gate schedule with single element
The sja1105_gating_cfg_time_to_interval function does this, as per the
comments:
/* The gate entries contain absolute times in their e->interval field. Convert
* that to proper intervals (i.e. "0, 5, 10, 15" to "5, 5, 5, 5").
*/
To perform that task, it iterates over gating_cfg->entries, at each step
updating the interval of the _previous_ entry. So one interval remains
to be updated at the end of the loop: the last one (since it isn't
"prev" for anyone else).
But there was an erroneous check, that the last element's interval
should not be updated if it's also the only element. I'm not quite sure
why that check was there, but it's clearly incorrect, as a tc-gate
schedule with a single element would get an e->interval of zero,
regardless of the duration requested by the user. The switch wouldn't
even consider this configuration as valid: it will just drop all traffic
that matches the rule.
Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 24 Jun 2020 13:54:46 +0000 (16:54 +0300)]
net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
Currently, tas_data->enabled would remain true even after deleting all
tc-gate rules from the switch ports, which would cause the
sja1105_tas_state_machine to get unnecessarily scheduled.
Also, if there were any errors which would prevent the hardware from
enabling the gating schedule, the sja1105_tas_state_machine would
continuously detect and print that, spamming the kernel log, even if the
rules were subsequently deleted.
The rules themselves are _not_ active, because sja1105_init_scheduling
does enough of a job to not install the gating schedule in the static
config. But the virtual link rules themselves are still present.
So call the functions that remove the tc-gate configuration from
priv->tas_data.gating_cfg, so that tas_data->enabled can be set to
false, and sja1105_tas_state_machine will stop from being scheduled.
Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 24 Jun 2020 13:54:45 +0000 (16:54 +0300)]
net: dsa: sja1105: unconditionally free old gating config
Currently sja1105_compose_gating_subschedule is not prepared to be
called for the case where we want to recompute the global tc-gate
configuration after we've deleted those actions on a port.
After deleting the tc-gate actions on the last port, max_cycle_time
would become zero, and that would incorrectly prevent
sja1105_free_gating_config from getting called.
So move the freeing function above the check for the need to apply a new
configuration.
Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 24 Jun 2020 13:54:44 +0000 (16:54 +0300)]
net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
It turns out that sja1105_compose_gating_subschedule must also be called
from sja1105_vl_delete, to recalculate the overall tc-gate
configuration. Currently this is not possible without introducing a
forward declaration. So move the function at the top of the file, along
with its dependencies.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 24 Jun 2020 10:08:18 +0000 (13:08 +0300)]
net: macb: free resources on failure path of at91ether_open()
DMA buffers were not freed on failure path of at91ether_open().
Along with changes for freeing the DMA buffers the enable/disable
interrupt instructions were moved to at91ether_start()/at91ether_stop()
functions and the operations on at91ether_stop() were done in
their reverse order (compared with how is done in at91ether_start()):
before this patch the operation order on interface open path
was as follows:
1/ alloc DMA buffers
2/ enable tx, rx
3/ enable interrupts
and the order on interface close path was as follows:
1/ disable tx, rx
2/ disable interrupts
3/ free dma buffers.
Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 24 Jun 2020 10:08:17 +0000 (13:08 +0300)]
net: macb: call pm_runtime_put_sync on failure path
Call pm_runtime_put_sync() on failure path of at91ether_open.
Fixes: e6a41c23df0d ("net: macb: ensure interface is not suspended on at91rm9200") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>