Properly account current consumed ple quota in mt7663s_tx_pick_quota
routine and avoid possible underflow.
Fixes: 6ef2d665f64d ("mt76: mt7663s: split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Linux doesn't own the memory immediately after the kernel image. On Octeon
bootloader places a shared structure right close after the kernel _end,
refer to "struct cvmx_bootinfo *octeon_bootinfo" in cavium-octeon/setup.c.
If check_kernel_sections_mem() rounds the PFNs up, first memblock_alloc()
inside early_init_dt_alloc_memory_arch() <= device_tree_init() returns
memory block overlapping with the above octeon_bootinfo structure, which
is being overwritten afterwards.
Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
For UARTs, the local pull-ups should be on the RX pin, not the TX pin.
UARTs transmit active-low, so a disconnected RX pin should be pulled
high instead of left floating to prevent noise being interpreted as
transmissions.
This gets rid of bogus sysrq events when the UART console is not
connected.
Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20201204064805.6480-1-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: e943c43b32ce ("PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1607070805-33038-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
if of_find_device_by_node() succeed, pinctrl_falcon_probe() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: e316cb2b16bb ("OF: pinctrl: MIPS: lantiq: adds support for FALCON SoC") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20201119011219.2248232-1-yukuai3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
strncat()'s third argument is how many bytes will be added *in addition* to
already existing bytes in destination. Plus extra zero byte will be added
after that. So existing use in test_sockmap has many opportunities to overflow
the string and cause memory corruptions. And in this case, GCC complains for
a good reason.
Fixes: 16962b2404ac ("bpf: sockmap, add selftests") Fixes: 73563aa3d977 ("selftests/bpf: test_sockmap, print additional test options") Fixes: 1ade9abadfca ("bpf: test_sockmap, add options for msg_pop_data() helper") Fixes: 463bac5f1ca7 ("bpf, selftests: Add test for ktls with skb bpf ingress policy") Fixes: e9dd904708c4 ("bpf: add tls support for testing in test_sockmap") Fixes: 753fb2ee0934 ("bpf: sockmap, add msg_peek tests to test_sockmap") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203235440.2302137-2-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
__module_address() needs to be called with preemption disabled or with
module_mutex taken. preempt_disable() is enough for read-only uses, which is
what this fix does. Also, module_put() does internal check for NULL, so drop
it as well.
Fixes: a38d1107f937 ("bpf: support raw tracepoints in modules") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201203204634.1325171-2-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Due to strobe signal not being propagated from CPU to securam
the securam needs to be mapped as device or strongly ordered memory
to work properly. Otherwise, updating to one offset may affect
the adjacent locations in securam.
atmel,osc-bypass property sets the bit 1 at main oscillator register.
On SAM9X60 this bit is not valid according to datasheet (chapter
28.16.9 PMC Clock Generator Main Oscillator Register).
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Marco Cardellini <marco.cardellini@microchip.com> Link: https://lore.kernel.org/r/1606903025-14197-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When we added sanitising of map names before loading programs to libbpf, we
still allowed periods in the name. While the kernel will accept these for
the map names themselves, they are not allowed in file names when pinning
maps. This means that bpf_object__pin_maps() will fail if called on an
object that contains internal maps (such as sections .rodata).
Fix this by replacing periods with underscores when constructing map pin
paths. This only affects the paths generated by libbpf when
bpf_object__pin_maps() is called with a path argument. Any pin paths set
by bpf_map__set_pin_path() are unaffected, and it will still be up to the
caller to avoid invalid characters in those.
Fixes: 113e6b7e15e2 ("libbpf: Sanitise internal map names so they are not rejected by the kernel") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201203093306.107676-1-toke@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
On PREEMPT_RT enabled kernels unmarked hrtimers are moved into soft
interrupt expiry mode by default.
The IIO hrtimer-trigger needs to run in hard interrupt context since it
will end up calling generic_handle_irq() which has the requirement to run
in hard interrupt context.
Explicitly specify that the timer needs to run in hard interrupt context by
using the HRTIMER_MODE_REL_HARD flag.
Fixes: f5c2f0215e36 ("hrtimer: Move unmarked hrtimers to soft interrupt expiry on RT") Reported-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20201117103751.16131-1-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Previously we were always returning a tag inclusion mask of zero via
PR_GET_TAGGED_ADDR_CTRL if TCF0 was set to NONE. Fix it by making
the code for the NONE case match the others.
The function ingenic_tcu_get_clock() is annotated for the __init
section but it is actually called from the online cpu callback.
That will lead to a crash if a CPU is hotplugged after boot time.
Remove the __init annotation for the ingenic_tcu_get_clock()
function.
Fixes: f19d838d08fc (clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20201125102346.1816310-1-daniel.lezcano@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The PMU group constraints mask for threshold events covers
all thresholding bits which includes threshold control value
(start/stop), select value as well as thresh_cmp value (MMCRA[9:18].
In power9, thresh_cmp bits were part of the event code. But in case
of power10, thresh_cmp bits are not part of event code due to
inclusion of MMCR3 bits. Hence thresh_cmp is not valid for
group constraints for power10.
Fix the PMU group constraints checking for threshold events in
power10 by using constraint mask and value for only threshold control
and select bits.
Fixes: a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1606409684-1589-4-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In Power9, L2/L3 bus events are always available as a
"bank" of 4 events. To obtain the counts for any of the
l2/l3 bus events in a given bank, the user will have to
program PMC4 with corresponding l2/l3 bus event for that
bank.
Commit 59029136d750 ("powerpc/perf: Add constraints for power9 l2/l3 bus events")
enforced this rule in Power9. But this is not valid for
Power10, since in Power10 Monitor Mode Control Register2
(MMCR2) has bits to configure l2/l3 event bits. Hence remove
this PMC4 constraint check from power10.
Since the l2/l3 bits in MMCR2 are not per-pmc, patch handles
group constrints checks for l2/l3 bits in MMCR2.
Fixes: a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1606409684-1589-3-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
power10 uses bit 9 of the raw event code as RADIX_SCOPE_QUAL.
This bit is used for enabling the radix process events.
Patch fixes the PMU counter support functions to program bit
18 of MMCR1 ( Monitor Mode Control Register1 ) with the
RADIX_SCOPE_QUAL bit value. Since this field is not per-pmc,
add this to PMU group constraints to make sure events in a
group will have same bit value for this field. Use bit 21 as
constraint bit field for radix_scope_qual. Patch also updates
the power10 raw event encoding layout information, format field
and constraints bit layout to include the radix_scope_qual bit.
Fixes: a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1606409684-1589-2-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
With CONFIG_PPC_8xx and CONFIG_XMON set, kernel build fails with
arch/powerpc/xmon/xmon.c:1379:12: error: 'find_free_data_bpt' defined
but not used [-Werror=unused-function]
Fix it by enclosing find_free_data_bpt() inside #ifndef CONFIG_PPC_8xx.
Fixes: 30df74d67d48 ("powerpc/watchpoint/xmon: Support 2nd DAWR") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201130034406.288047-1-ravi.bangoria@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit 63ce271b5e37 ("powerpc/prom: convert PROM_BUG() to standard
trap") added an EMIT_BUG_ENTRY for the trap after the branch to
start_kernel(). The EMIT_BUG_ENTRY was for the address "0b", however the
trap was not labeled with "0". Hence the address used for bug is in
relative_toc() where the previous "0" label is. Label the trap as "0" so
the correct address is used.
Fixes: 63ce271b5e37 ("powerpc/prom: convert PROM_BUG() to standard trap") Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201130004404.30953-1-jniethe5@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When perf record session is started with "-I" option, capturing registers
on each sample calls is_sier_available() to check for the
SIER (Sample Instruction Event Register) availability in the platform.
This function in core-book3s accesses 'ppmu->flags'. If a platform specific
PMU driver is not registered, ppmu is set to NULL and accessing its
members results in a crash. Fix the crash by returning false in
is_sier_available() if ppmu is not set.
Fixes: 333804dc3b7a ("powerpc/perf: Update perf_regs structure to include SIER") Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1606185640-1720-1-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The "a->index" value comes from the user via the ioctl. The problem is
that the shift can wrap resulting in setting "mxb->cur_audinput" to an
invalid value, which later results in an array overflow.
Fixes: 6680427791c9 ("[media] mxb: fix audio handling") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In case of retrying fill_super with skip_recovery,
s_encoding for casefold would not be loaded again even though it's
already been freed because it's not NULL.
Set NULL after free to prevent double freeing when unmount.
Fixes: eca4873ee1b6 ("f2fs: Use generic casefolding support") Signed-off-by: Hyeongseok Kim <hyeongseok@gmail.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced. It depends on the mainline commit[PM: runtime:
Add pm_runtime_resume_and_get to deal with usagecounter].
commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") allows drivers using mmap to put PCI memory mapped
BAR space into userspace to work correctly on AMD SME systems that default
to all memory encrypted.
Since vfio_pci_mmap_fault() is working with PCI memory mapped BAR space it
should be calling io_remap_pfn_range() otherwise it will not work on SME
systems.
Fixes: 11c4cd07ba11 ("vfio-pci: Fault mmaps to enable vma tracking") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Peter Xu <peterx@redhat.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
nfsiod is currently a concurrency-managed workqueue (CMWQ).
This means that workitems scheduled to nfsiod on a given CPU are queued
behind all other work items queued on any CMWQ on the same CPU. This
can introduce unexpected latency.
Occaionally nfsiod can even cause excessive latency. If the work item
to complete a CLOSE request calls the final iput() on an inode, the
address_space of that inode will be dismantled. This takes time
proportional to the number of in-memory pages, which on a large host
working on large files (e.g.. 5TB), can be a large number of pages
resulting in a noticable number of seconds.
We can avoid these latency problems by switching nfsiod to WQ_UNBOUND.
This causes each concurrent work item to gets a dedicated thread which
can be scheduled to an idle CPU.
There is precedent for this as several other filesystems use WQ_UNBOUND
workqueue for handling various async events.
Signed-off-by: NeilBrown <neilb@suse.de> Fixes: ada609ee2ac2 ("workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
NLM uses an interval-based rebinding, i.e. it clears the transport's
binding under certain conditions if more than 60 seconds have elapsed
since the connection was last bound.
This rebinding is not necessary for an autobind RPC client over a
connection-oriented protocol like TCP.
It can also cause problems: it is possible for nlm_bind_host() to clear
XPRT_BOUND whilst a connection worker is in the middle of trying to
reconnect, after it had already been checked in xprt_connect().
When the connection worker notices that XPRT_BOUND has been cleared
under it, in xs_tcp_finish_connecting(), that results in:
xs_tcp_setup_socket: connect returned unhandled error -107
Worse, it's possible that the two can get into lockstep, resulting in
the same behaviour repeated indefinitely, with the above error every
300 seconds, without ever recovering, and the connection never being
established. This has been seen in practice, with a large number of NLM
client tasks, following a server restart.
The existing callers of nlm_bind_host & nlm_rebind_host should not need
to force the rebind, for TCP, so restrict the interval-based rebinding
to UDP only.
For TCP, we will still rebind when needed, e.g. on timeout, and connection
error (including closure), since connection-related errors on an existing
connection, ECONNREFUSED when trying to connect, and rpc_check_timeout(),
already unconditionally clear XPRT_BOUND.
To avoid having to add the fix, and explanation, to both nlm_bind_host()
and nlm_rebind_host(), remove the duplicate code from the former, and
have it call the latter.
Drop the dprintk, which adds no value over a trace.
Signed-off-by: Calum Mackay <calum.mackay@oracle.com> Fixes: 35f5a422ce1a ("SUNRPC: new interface to force an RPC rebind") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
'snprintf' returns the number of characters which would have been written
if enough space had been available, excluding the terminating null byte.
Thus, the return value of 'sizeof(buf)' means that the last character
has been dropped.
Signed-off-by: Fedor Tokarev <ftokarev@gmail.com> Fixes: 2f34b8bfae19 ("SUNRPC: add links for all client xprts to debugfs") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
According to RFC5666, the correct netid for an IPv6 addressed RDMA
transport is "rdma6", which we've supported as a mount option since
Linux-4.7. The problem is when we try to load the module "xprtrdma6",
that will fail, since there is no modulealias of that name.
Fixes: 181342c5ebe8 ("xprtrdma: Add rdma6 option to support NFS/RDMA IPv6") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently, the client will always ask for security_labels if the server
returns that it supports that feature regardless of any LSM modules
(such as Selinux) enforcing security policy. This adds performance
penalty to the READDIR operation.
Client adjusts superblock's support of the security_label based on
the server's support but also current client's configuration of the
LSM modules. Thus, prior to using the default bitmask in READDIR,
this patch checks the server's capabilities and then instructs
READDIR to remove FATTR4_WORD2_SECURITY_LABEL from the bitmask.
v5: fixing silly mistakes of the rushed v4
v4: simplifying logic
v3: changing label's initialization per Ondrej's comment
v2: dropping selinux hook and using the sb cap.
Suggested-by: Ondrej Mosnacek <omosnace@redhat.com> Suggested-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Fixes: 2b0143b5c986 ("VFS: normal filesystems (and lustre): d_inode() annotations") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently, we wake up the tasks by priority queue ordering, which means
that we ignore the batching that is supposed to help with QoS issues.
Fixes: c049f8ea9a0d ("SUNRPC: Remove the bh-safe lock requirement on the rpc_wait_queue->lock") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Should an error occur after calling 'ath10k_usb_create()', it should be
undone by a corresponding 'ath10k_usb_destroy()' call
Fixes: 4db66499df91 ("ath10k: add initial USB support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201122170358.1346065-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If 'ath10k_usb_create()' fails, we should release some resources and report
an error instead of silently continuing.
Fixes: 4db66499df91 ("ath10k: add initial USB support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201122170342.1346011-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The wmi service available event has been
extended to contain extra 128 bit for new services
to be indicated by firmware.
Currently the presence of any optional TLVs in
the wmi service available event leads to a parsing
error with the below error message:
ath10k_snoc 18800000.wifi: failed to parse svc_avail tlv: -71
The wmi service available event parsing should
not return error for the newly added optional TLV.
Fix this parsing for service available event message.
Fixes: cea19a6ce8bf ("ath10k: add WMI_SERVICE_AVAILABLE_EVENT support") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605501291-23040-1-git-send-email-pillair@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
It was observed that the codepath for the ATH11K_SKB_HW_80211_ENCAP was
used even when the IEEE80211_TX_CTRL_HW_80211_ENCAP was not enabled for a
an skbuff. This became even more prominent when the QCAs wlan-open patchset
for ath11k [1] was applied and a sane looking fix just caused crashes when
injecting frames via a monitor interface (for example with ratechecker):
Problem is that the state of ath11k_skb_cb->flags must be considered
unknown and could contain anything when it is not manually initialized. So
it could also contain ATH11K_SKB_HW_80211_ENCAP. And this can result in the
code to assume that the ath11k_skb_cb->vif is set - even when this is not
always the case for non ATH11K_SKB_HW_80211_ENCAP transmissions.
[1] https://source.codeaurora.org/quic/qsdk/oss/system/feeds/wlan-open/tree/mac80211/patches?h=NHSS.QSDK.11.4.r3
(162 patches at the moment which are often not upstreamed but essential
to get ath11k working)
Fixes: e7f33e0c52c0 ("ath11k: add tx hw 802.11 encapsulation offloading support") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201119154235.263250-2-sven@narfation.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The driver_data area of ieee80211_tx_info is used in ath11k for
ath11k_skb_cb. The first function in the TX patch which rewrites it to
ath11k_skb_cb is already ath11k_mac_op_tx. No one else in the code path
must use it for something else before it reinitializes it. Otherwise the
data has to be considered uninitialized or corrupt.
But the ieee80211_tx_info.control shares exactly the same area as
ieee80211_tx_info.driver_data and ath11k is still using it. This results in
best case in a
ath11k c000000.wifi1: no vif found for mgmt frame, flags 0x0
or (slightly worse) in a kernel oops.
Instead, the interesting data must be moved first into the ath11k_skb_cb
and ieee80211_tx_info.control must then not be used anymore.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201119154235.263250-1-sven@narfation.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
To comply with the intended usage of the V4L2 selection target when
used to retrieve a sensor image properties, adjust the rectangles
returned by the imx219 driver.
The top/left crop coordinates of the TGT_CROP rectangle were set to
(0, 0) instead of (8, 8) which is the offset from the larger physical
pixel array rectangle. This was also a mismatch with the default values
crop rectangle value, so this is corrected. Found with v4l2-compliance.
While at it, add V4L2_SEL_TGT_CROP_BOUNDS support: CROP_DEFAULT and
CROP_BOUNDS have the same size as the non-active pixels are not readable
using the selection API. Found with v4l2-compliance.
[reword commit message, use macros for pixel offsets]
Fixes: e6d4ef7d58aa7 ("media: i2c: imx219: Implement get_selection") Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fix GPIO enable/disable operations which wrongly read the 0x0f register
to obtain the current mask of the enabled lines instead of using
the correct 0x0e register.
Also fix access to bit 0 of the register which is marked as reserved.
Speaker amp's SSP bclk configuration was changed in the topology file to be
based on 12.288MHz and dai_ops->hw_params is based on s32le format.
But, the TDM slot size remained set to 24 bits.
This inconsistency created audible noises and needs to be corrected.
This patch updates TDM slot width to 32.
Fixes: bc7477fc2ab4 ("ASoC: Intel: Boards: tgl_max98373: Update TDM configuration in hw_params") Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20201201211150.433472-1-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fix to return the error code -ENODEV when fails to init wmi and
smm.
Fixes: 41e36f2f85af ("platform/x86: dell-smbios: Link all dell-smbios-* modules together") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Link: https://lore.kernel.org/r/20201125065032.154125-1-miaoqinglang@huawei.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The 'master' device acts as a glue layer used during bus
initialization only, and it needs to be 'transparent' for pm_runtime
management. Its behavior should be that it becomes active when one of
its children becomes active, and suspends when all of its children are
suspended.
In our tests on Intel platforms, we routinely see these sort of
warnings on the initial boot:
[ 21.447345] rt715 sdw:3:25d:715:0: runtime PM trying to activate
child device sdw:3:25d:715:0 but parent (sdw-master-3) is not active
This is root-caused to a missing setup to make the device 'active' on
probe. Since we don't want the device to remain active forever after
the probe, the autosuspend configuration is also enabled at the end of
the probe - the device will actually autosuspend only in the case
where there are no devices physically attached. In practice, the
master device will suspend when all its children are no longer active.
The mhu_db_channel info is allocated per channel using devm_kzalloc from
mhu_db_mbox_xlate which gets called from mbox_request_channel. However
we are releasing the allocated mhu_db_channel info using plain kfree from
mhu_db_shutdown which is called from mbox_free_channel.
This leads to random crashes when the channel is freed like below one:
Unable to handle kernel paging request at virtual address 0080000400000008
[0080000400000008] address between user and kernel address ranges
Internal error: Oops: 96000044 [#1] PREEMPT SMP
Modules linked in: scmi_module(-)
CPU: 1 PID: 2212 Comm: rmmod Not tainted 5.10.0-rc5 #31
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno
Development Platform, BIOS EDK II Nov 19 2020
pstate: 20000085 (nzCv daIf -PAN -UAO -TCO BTYPE=--)
pc : release_nodes+0x74/0x230
lr : devres_release_all+0x40/0x68
Call trace:
release_nodes+0x74/0x230
devres_release_all+0x40/0x68
device_release_driver_internal+0x12c/0x1f8
driver_detach+0x58/0xe8
bus_remove_driver+0x64/0xe0
driver_unregister+0x38/0x68
platform_driver_unregister+0x1c/0x28
scmi_driver_exit+0x38/0x44 [scmi_module]
__arm64_sys_delete_module+0x188/0x260
el0_svc_common.constprop.0+0x80/0x1a8
do_el0_svc+0x2c/0x98
el0_sync_handler+0x160/0x168
el0_sync+0x174/0x180
Code: 1400000deb07009f54000460f9400486 (f90004a6)
---[ end trace c55ffd306c140233 ]---
Fix it by replacing kfree with devm_kfree as required.
Page alignment is required when setting the number of extended sge
according to the hardware's achivement. If the space of needed extended
sge is greater than one page, the roundup_pow_of_two() can ensure
that. But if the needed extended sge isn't 0 and can not be filled in a
whole page, the driver should align it specifically.
Fixes: 54d6638765b0 ("RDMA/hns: Optimize WQE buffer size calculating process") Link: https://lore.kernel.org/r/1606558959-48510-3-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
One RC SQ WQE can store 2 sges but UD can't, so ignore 2 valid sges of
wr.sglist for RC which have been filled in WQE before setting extended
sge. Either of RC and UD can not contain 0-length sges, so these 0-length
sges should be skipped.
Fixes: 54d6638765b0 ("RDMA/hns: Optimize WQE buffer size calculating process") Link: https://lore.kernel.org/r/1606558959-48510-2-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If cs-gpios property is used in devicetree then ctlr->num_chipselect value
may be changed by spi_get_gpio_descs().
So use ctlr->max_native_cs instead of ctlr->num_chipselect to set SPI_MCR
Fixes: 4fcc7c2292de (spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR) Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Link: https://lore.kernel.org/r/20201201085916.63543-1-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Revert the msleep() back to an mdelay() to avoid sleeping in atomic
context.
Link: https://lore.kernel.org/r/20201126132952.2287996-2-bigeasy@linutronix.de Fixes: 4daf1ef3c681 ("scsi: pm80xx: Convert 'long' mdelay to msleep") Cc: Vikram Auradkar <auradkar@google.com> Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
if of_find_device_by_node() succeed, meson_canvas_get() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: 382f8be04551 ("soc: amlogic: canvas: Fix meson_canvas_get when probe failed") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201117011322.522477-1-yukuai3@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Second stage bootloaders prior to Linux boot may use all inbound windows
including IARR1/IMAP1. We need to ensure that all previous configuration
of inbound windows are invalidated during the initialization stage of
the Linux iProc PCIe driver so let's add a fix to define and invalidate
IARR1/IMAP1 because it is currently missing, fixing the issue.
Link: https://lore.kernel.org/r/20201001060054.6616-3-srinath.mannam@broadcom.com Fixes: 9415743e4c8a ("PCI: iproc: Invalidate PAXB address mapping") Signed-off-by: Roman Bacik <roman.bacik@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
[lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Declare the full size array for all revisions of PAX register sets
to avoid potentially out of bound access of the register array
when they are being initialized in iproc_pcie_rev_init().
Link: https://lore.kernel.org/r/20201001060054.6616-2-srinath.mannam@broadcom.com Fixes: 06324ede76cdf ("PCI: iproc: Improve core register population") Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The shift of 1 by align_order is evaluated using 32 bit arithmetic and the
result is assigned to a resource_size_t type variable that is a 64 bit
unsigned integer on 64 bit platforms. Fix an overflow before widening issue
by making the 1 a ULL.
Addresses-Coverity: ("Unintentional integer overflow") Fixes: 32a9a682bef2 ("PCI: allow assignment of memory resources with a specified alignment") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
32-bit BARs are limited to 2GB size (2^31). By extension, I assume 64-bit
BARs are limited to 2^63 bytes. Limit the alignment requested by the
"pci=resource_alignment=" command-line parameter to 2^63.
Link: https://lore.kernel.org/r/20201007123045.GS4282@kadam Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The numbering of the i2c busses differs from ACPI and a number of typos
was made in the original patch. Further more the irq flags for the
various resources was not correct and i2c3 only has one of the two
client devices active in any one device.
Also label the various devices, for easier comparison with the ACPI
tables.
In commit "phy: tegra: xusb: Add usb-phy support", an OTG capable PHY
device, such as phy-usb2.0 device of Jetson-TX1 platform, will be
bound to the tegra-xusb-padctl driver by the following line in
tegra_xusb_setup_usb_role_switch().
The upstream port, doesn't really follow the vendor partitioning. The
bootloader partition has one U-Boot FIT image containing all needed
bits and pieces. Even today the bootloader is already larger than the
current "bootloader" partition. Thus, fold all the partitions into one
and keep the environment one. The latter is still valid.
We keep the failsafe partitions because the first half of the SPI flash
is preinstalled by the vendor and immutable.
Fixes: 815364d0424e ("arm64: dts: freescale: add Kontron sl28 support") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
On the LS1028A the ENETC reference clock is connected to 4th HWA output,
see Figure 7 "Clock subsystem block diagram".
The PHC may run with a wrong frequency. ptp_qoriq_auto_config() will read
the clock speed of the clock given in the device tree. It is likely that,
on the reference board this wasn't noticed because both clocks have the
same frequency. But this must not be always the case. Fix it.
Fixes: 49401003e260 ("arm64: dts: fsl: ls1028a: add ENETC 1588 timer node") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When an interrupt allocation fails for N interrupts, it is pretty
common for the error handling code to free the same number of interrupts,
no matter how many interrupts have actually been allocated.
This may result in the domain freeing code to be unexpectedly called
for interrupts that have no mapping in that domain. Things end pretty
badly.
Instead, add some checks to irq_domain_free_irqs_hierarchy() to make sure
that thiss does not follow the hierarchy if no mapping exists for a given
interrupt.
Fixes: 6a6544e520abe ("genirq/irqdomain: Remove auto-recursive hierarchy support") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201129135551.396777-1-maz@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in callers(bq24190_sysfs_show,
bq24190_charger_get_property, bq24190_charger_set_property,
bq24190_battery_get_property, bq24190_battery_set_property),
so we should fix it.
Fixes: f385e6e2a1532 ("power: bq24190_charger: Use PM runtime autosuspend") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit 9c80662a74cd ("power: supply: axp288_charger: Add special handling
for HP Pavilion x2 10") added special handling for HP Pavilion x2 10
models which use the weird combination of a Type-C connector and the
non Type-C aware AXP288 PMIC.
This special handling was activated by a DMI match a the product-name
of "HP Pavilion x2 Detachable". Recently I've learned that there are
also older "HP Pavilion x2 Detachable" models with an AXP288 PMIC +
a micro-usb connector where we should not activate the special handling
for the Type-C connectors.
Extend the matching to also match on the DMI board-name and match on the
2 boards (one Bay Trail based one Cherry Trail based) of which we are
certain that they use the AXP288 + Type-C connector combination.
Note the DSDT code from these older (AXP288 + micro-USB) models contains
some AML code (which never runs under Linux) which reads the micro-USB
connector id-pin and if it is pulled to ground, which would normally mean
the port is in host mode!, then it sets the input-current-limit to 3A,
it seems HP is using the micro-USB port as a charging only connector
and identifies their own 3A capable charger though this hack which is a
major violation of the USB specs. Note HP also hardcodes a 2A limit
when the id-pin is not pulled to ground, which is also in violation
of the specs.
I've no intention to add support for HP's hack to support 3A charging
on these older models. By making the DMI matches for the Type-C equipped
models workaround more tighter, these older models will be treated just
like any other AXP288 + micro-USB equipped device and the input-current
limit will follow the BC 1.2 spec (using the defacto standard values
there where the BC 1.2 spec defines a range).
Fixes: 9c80662a74cd ("power: supply: axp288_charger: Add special handling for HP Pavilion x2 10") BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1896924 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When current sense is disabled, max17042_no_current_sense_psy_desc gets
used which ignores two last properties from the list.
Fixes: 21b01cc879cc ("power: supply: max17042_battery: Add support for the TTE_NOW prop") Reported-by: Timon Baetz <timon.baetz@protonmail.com> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The board has a standard USB A female port connected to the USB OTG
controller's data pins. Set dr_mode in the OTG controller node to
indicate this usage, instead of having the implementation guess.
The switches with integrated CPUs have only got a single i2c controller.
They incorrectly gained one when they were split from the Armada-XP.
Fixes: 43e28ba87708 ("ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In current code, it jumps to ida_simple_remove() when ida_simple_get()
failes to allocate an ID. Just return to fix it.
Fixes: 0fae198988b8 ("HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Aliases property name must include only lowercase and '-', so fix this
in the driver, so we're not tempted to do "ovl_2l0 = &ovl_2l0" in the
device-tree instead of the right one which is "ovl-2l0 = &ovl_2l0".
Fixes: b17bdd0d7a73 ("drm/mediatek: add component OVL_2L0") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Device memory (DM) are registered as MR during initialization flow, these
MRs were not tracked by resource tracker and had res->valid set as a
false. Update the code to manage them too.
Before this change:
$ ibv_rc_pingpong -j &
$ rdma res show mr <-- shows nothing
After this change:
$ ibv_rc_pingpong -j &
$ rdma res show mr
dev ibp0s9 mrn 0 mrlen 4096 pdn 3 pid 734 comm ibv_rc_pingpong
Fixes: be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support") Link: https://lore.kernel.org/r/20201117070148.1974114-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Attempting to send a power request during PM operations, when the QMI
handle isn't initialized results in a NULL pointer dereference. So check
if the QMI handle has been initialized before attempting to post the
power requests.
Currently, lwt_len_hist's map lwt_len_hist_map is uses pinning, and the
map isn't cleared on test end. This leds to reuse of that map for
each test, which prevents the results of the test from being accurate.
This commit fixes the problem by removing of pinned map from bpffs.
Also, this commit add the executable permission to shell script
files.
Fixes: f74599f7c5309 ("bpf: Add tests and samples for LWT-BPF") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-7-danieltimlee@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The pm_runtime_enable will increase power disable depth.
Thus a pairing decrement is needed on the error handling
path to keep it balanced according to context.
Fixes: e32a83c70cf98 ("serial: 8250-mtk: modify mtk uart power and clock management") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201119141126.168850-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The loopback flag will be set to 1 by the hardware when the source mac
address is same as the destination mac address. So the driver don't need
to compare them.
Fixes: d6a3627e311c ("RDMA/hns: Optimize wqe buffer set flow for post send") Link: https://lore.kernel.org/r/1605526408-6936-4-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Traffic class and hop limit in address vector is not assigned from GRH,
but it will be filled into UD SQ WQE. So the hardware will get a wrong
value.
Fixes: 82e620d9c3a0 ("RDMA/hns: Modify the data structure of hns_roce_av") Link: https://lore.kernel.org/r/1605526408-6936-3-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Recently we learned that Android and Windows firmware don't seem to
like using 3 as an iommu mask value for IPA. A simple fix was to
specify exactly the streams needed explicitly, rather than implying
a range with the mask. Make the same change for the SC7180 platform.
See also:
https://lore.kernel.org/linux-arm-msm/20201123052305.157686-1-bjorn.andersson@linaro.org/
Remove PSU EEPROM configuration for systems class equipped with
Mellanox chip Spectrum and ATOM CPU - system types MSN274x. Till now
all the systems from this class used few types of power units, all
equipped with EEPROM device with address space two bytes. Thus, all
these devices have been handled by EEPROM driver "24c02".
There is a new requirement is to support power unit replacement by "off
the shelf" device, matching electrical required parameters. Such device
can be equipped with different EEPROM type, which could be one byte
address space addressing or even could be not equipped with EEPROM.
In such case "24c02" will not work.
Fixes: ef08e14a3 ("platform/x86: mlx-platform: Add support for new msn274x system type") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20201125101056.174708-3-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Remove PSU EEPROM configuration for systems class equipped with
Mellanox chip Spectrum and Celeron CPU - system types MSN2700, MSN2100.
Till now all the systems from this class used few types of power units,
all equipped with EEPROM device with address space two bytes. Thus, all
these devices have been handled by EEPROM driver "24c02".
There is a new requirement is to support power unit replacement by "off
the shelf" device, matching electrical required parameters. Such device
can be equipped with different EEPROM type, which could be one byte
address space addressing or even could be not equipped with EEPROM.
In such case "24c02" will not work.
Fixes: c6acad68e ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface") Fixes: ba814fdd0 ("platform/x86: mlx-platform: Use defines for bus assignment") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20201125101056.174708-2-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
DCSS supports 90/180/270 degree rotations for Vivante tiled and super-tiled
formats. Unfortunately, with the current code, they didn't work properly.
This simple patch makes the rotations work by fixing the way the scaler is set
up for 90/270 degree rotations. In this particular case, the source width and
height need to be swapped since DPR is sending the buffer to scaler already
rotated.
Also, make sure to allow full rotations for DRM_FORMAT_MOD_VIVANTE_SUPER_TILED.
Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ") Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201105140127.25249-2-laurentiu.palcu@oss.nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit 5bd773242f75 ("soundwire: qcom: avoid dependency on
CONFIG_SLIMBUS") removed hard dependency on Slimbus for qcom driver but
it results in build failure when: CONFIG_SOUNDWIRE_QCOM=y
CONFIG_SLIMBUS=m
drivers/soundwire/qcom.o: In function `qcom_swrm_probe':
qcom.c:(.text+0xf44): undefined reference to `slimbus_bus'
Fix this by using IS_REACHABLE() in driver which is recommended to be
used with imply.
Fixes: 5bd773242f75 ("soundwire: qcom: avoid dependency on CONFIG_SLIMBUS") Reported-by: kernel test robot <lkp@intel.com> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20201125055155.GD8403@vkoul-mobl Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
rdma_detroy_id() cannot be called under &lock - we must instead keep the
error'd ID around until &lock can be released, then destroy it.
This is complicated by the usual way listen IDs are destroyed through
cma_process_remove() which can run at any time and will asynchronously
destroy the same ID.
Remove the ID from visiblity of cma_process_remove() before going down the
destroy path outside the locking.
Fixes: c80a0c52d85c ("RDMA/cma: Add missing error handling of listen_id") Link: https://lore.kernel.org/r/20201118133756.GK244516@ziepe.ca Reported-by: syzbot+1bc48bf7f78253f664a9@syzkaller.appspotmail.com Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fix the device-tree entry that represents I/O High Voltage property
by replacing 'nvidia,io-high-voltage' with 'nvidia,io-hv' as the former
entry is deprecated.
Fixes: dbb72e2c305b ("arm64: tegra: Add configuration for PCIe C5 sideband signals") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
LED core does not allow LED_COLOR_ID_MULTI for now and instead for RGB
LEDs prefers LED_COLOR_ID_RGB.
Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 77dce3a22e89 ("leds: disallow /sys/class/leds/*:multi:* for now") Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In case of memory allocation failure, we must release some resources as
done in all other error handling paths of the function.
'goto child_out' instead of a direct return so that 'fwnode_handle_put()'
is called when we break out of a 'device_for_each_child_node' loop.
Fixes: 242b81170fb8 ("leds: lp50xx: Add the LP50XX family of the RGB LED driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
if of_find_device_by_node() succeed, netxbig_leds_get_of_pdata() doesn't
have a corresponding put_device(). Thus add jump target to fix the
exception handling for this function implementation.
Fixes: 2976b1798909 ("leds: netxbig: add device tree binding") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>