This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.
On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.
The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.
Cc: <stable@vger.kernel.org> Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel") Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Masahiro Yamada [Thu, 5 Jan 2023 03:13:06 +0000 (12:13 +0900)]
s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36
Nathan Chancellor reports that the s390 vmlinux fails to link with
GNU ld < 2.36 since commit 99cb0d917ffa ("arch: fix broken BuildID
for arm64 and riscv").
It happens for defconfig, or more specifically for CONFIG_EXPOLINE=y.
$ s390x-linux-gnu-ld --version | head -n1
GNU ld (GNU Binutils for Debian) 2.35.2
$ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- allnoconfig
$ ./scripts/config -e CONFIG_EXPOLINE
$ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- olddefconfig
$ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu-
`.exit.text' referenced in section `.s390_return_reg' of drivers/base/dd.o: defined in discarded section `.exit.text' of drivers/base/dd.o
make[1]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
make: *** [Makefile:1252: vmlinux] Error 2
arch/s390/kernel/vmlinux.lds.S wants to keep EXIT_TEXT:
.exit.text : {
EXIT_TEXT
}
But, at the same time, EXIT_TEXT is thrown away by DISCARD because
s390 does not define RUNTIME_DISCARD_EXIT.
I still do not understand why the latter wins after 99cb0d917ffa,
but defining RUNTIME_DISCARD_EXIT seems correct because the comment
line in arch/s390/kernel/vmlinux.lds.S says:
/*
* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
*/
Nathan also found that binutils commit 21401fc7bf67 ("Duplicate output
sections in scripts") cured this issue, so we cannot reproduce it with
binutils 2.36+, but it is better to not rely on it.
s390: expicitly align _edata and _end symbols on page boundary
Symbols _edata and _end in the linker script are the
only unaligned expicitly on page boundary. Although
_end is aligned implicitly by BSS_SECTION macro that
is still inconsistent and could lead to a bug if a tool
or function would assume that _edata is as aligned as
others.
For example, vmem_map_init() function does not align
symbols _etext, _einittext etc. Should these symbols
be unaligned as well, the size of ranges to update
were short on one page.
Instead of fixing every occurrence of this kind in the
code and external tools just force the alignment on
these two symbols.
Niklas Schnelle [Tue, 3 Jan 2023 14:11:07 +0000 (15:11 +0100)]
s390/debug: add _ASM_S390_ prefix to header guard
Using DEBUG_H without a prefix is very generic and inconsistent with
other header guards in arch/s390/include/asm. In fact it collides with
the same name in the ath9k wireless driver though that depends on !S390
via disabled wireless support. Let's just use a consistent header guard
name and prevent possible future trouble.
Linus Torvalds [Sun, 1 Jan 2023 19:27:00 +0000 (11:27 -0800)]
Merge tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
Linus Torvalds [Sun, 1 Jan 2023 19:11:13 +0000 (11:11 -0800)]
Merge tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"I'm just back from the mountains, and Dave is out at the beach and
should be back in a week again. Just i915 fixes and since Rodrigo
bothered to make the pull last week I figured I should warm up gpg and
forward this in a nice signed tag as a new years present!
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early"
* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
drm/i915/uc: Fix two issues with over-size firmware files
drm/i915: improve the catch-all evict to handle lock contention
drm/i915: Remove __maybe_unused from mtl_info
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
Linus Torvalds [Sat, 31 Dec 2022 18:21:47 +0000 (10:21 -0800)]
Merge tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
fixdep: remove unneeded <stdarg.h> inclusion
kbuild: sort single-targets alphabetically again
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
kbuild: Fix running modpost with musl libc
kbuild: add a missing line for help message
.gitignore: ignore *.rpm
arch: fix broken BuildID for arm64 and riscv
kconfig: Add static text for search information in help menu
Linus Torvalds [Fri, 30 Dec 2022 18:47:25 +0000 (10:47 -0800)]
Merge tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Linus Torvalds [Fri, 30 Dec 2022 18:30:54 +0000 (10:30 -0800)]
Merge tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few small fixes:
- A regression fix for HDMI audio on HD-audio AMD codecs
- Fixes for LINE6 MIDI handling
- HD-audio quirk for Dell laptops"
* tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
ALSA: line6: fix stack overflow in line6_midi_transmit
ALSA: line6: correct midi status byte when receiving data from podxt
Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
* acpi-resource:
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
* acpi-video:
ACPI: video: Fix Apple GMUX backlight detection
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Jani Nikula [Mon, 19 Dec 2022 10:59:55 +0000 (12:59 +0200)]
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.
MIPI sequence v4 also adds a flag to fall back to non-native sequences.
v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
too (Ville)
- References instead of Closes issue 6131 because this does not fix everything
v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)
v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)
v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()
Masahiro Yamada [Wed, 28 Dec 2022 19:10:14 +0000 (04:10 +0900)]
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f959b
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.
Add it as an alternative package.
BTW, if it is impossible to solve the build requirement, the final
resort would be:
$ make RPMOPTS=--nodeps rpm-pkg
This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.
NOTE1:
Likewise, it is possible to bypass the build dependency check for
debian package builds:
$ make DPKG_FLAGS=-d deb-pkg
NOTE2:
The 'or' operator is supported since RPM 4.13. So, old distros such
as CentOS 7 will break. I suggest installing newer rpmbuild in such
cases.
Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u Fixes: 8818039f959b ("kbuild: add ability to make source rpm buildable using koji") Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev> Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Samuel Holland [Tue, 27 Dec 2022 21:48:21 +0000 (15:48 -0600)]
kbuild: Fix running modpost with musl libc
commit 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost
rule") moved 'vmlinux.o' inside modpost-args, possibly before some of
the other options. However, getopt() in musl libc follows POSIX and
stops looking for options upon reaching the first non-option argument.
As a result, the '-T' option is misinterpreted as a positional argument,
and the build fails:
make -f ./scripts/Makefile.modpost
scripts/mod/modpost -E -o Module.symvers vmlinux.o -T modules.order
-T: No such file or directory
make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1
make: *** [Makefile:1960: modpost] Error 2
The fix is to move all options before 'vmlinux.o' in modpost-args.
Fixes: 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost rule") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 26 Dec 2022 18:54:44 +0000 (03:54 +0900)]
.gitignore: ignore *.rpm
Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit 8818039f959b ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Masahiro Yamada [Mon, 26 Dec 2022 18:45:37 +0000 (03:45 +0900)]
arch: fix broken BuildID for arm64 and riscv
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 994b7ac1697b ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 2348e6bf4421 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/ Fixes: 994b7ac1697b ("arm64: remove special treatment for the link order of head.o") Fixes: 2348e6bf4421 ("riscv: remove special treatment for the link order of head.o") Reported-by: Dennis Gilmore <dennis@ausil.us> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
John Harrison [Wed, 21 Dec 2022 19:30:31 +0000 (11:30 -0800)]
drm/i915/uc: Fix two issues with over-size firmware files
In the case where a firmware file is too large (e.g. someone
downloaded a web page ASCII dump from github...), the firmware object
is released but the pointer is not zerod. If no other firmware file
was found then release would be called again leading to a double kfree.
Also, the size check was only being applied to the initial firmware
load not any of the subsequent attempts. So move the check into a
wrapper that is used for all loads.
Fixes: 016241168dc5 ("drm/i915/uc: use different ggtt pin offsets for uc loads") Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221221193031.687266-4-John.C.Harrison@Intel.com
(cherry picked from commit 4071d98b296a5bc5fd4b15ec651bd05800ec9510) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Matthew Auld [Fri, 16 Dec 2022 11:34:56 +0000 (11:34 +0000)]
drm/i915: improve the catch-all evict to handle lock contention
The catch-all evict can fail due to object lock contention, since it
only goes as far as trylocking the object, due to us already holding the
vm->mutex. Doing a full object lock here can deadlock, since the
vm->mutex is always our inner lock. Add another execbuf pass which drops
the vm->mutex and then tries to grab the object will the full lock,
before then retrying the eviction. This should be good enough for now to
fix the immediate regression with userspace seeing -ENOSPC from execbuf
due to contended object locks during GTT eviction.
v2 (Mani)
- Also revamp the docs for the different passes.
Lucas De Marchi [Wed, 14 Dec 2022 19:49:44 +0000 (11:49 -0800)]
drm/i915: Remove __maybe_unused from mtl_info
The attribute __maybe_unused should remain only until the respective
info is not in the pciidlist. The info can't be added together
with its definition because that would cause the driver to automatically
probe for the device, while it's still not ready for that. However once
pciidlist contains it, the attribute can be removed.
Andrzej Hajda [Wed, 14 Dec 2022 07:54:39 +0000 (08:54 +0100)]
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
In case of Gen12.50 video and compute engines, TLB_INV registers are
masked - to modify one bit, corresponding bit in upper half of the register
must be enabled, otherwise nothing happens.
Fixes: 77fa9efc16a9 ("drm/i915/xehp: Create separate reg definitions for new MCR registers") Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221214075439.402485-1-andrzej.hajda@intel.com
(cherry picked from commit 4d5cf7b1680a1e6db327e3c935ef58325cbedb2c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Linus Torvalds [Fri, 30 Dec 2022 00:57:29 +0000 (16:57 -0800)]
Merge tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Mostly just NVMe, but also a single fixup for BFQ for a regression
that happened during the merge window. In detail:
- NVMe pull requests via Christoph:
- Fix doorbell buffer value endianness (Klaus Jensen)
- Fix Linux vs NVMe page size mismatch (Keith Busch)
- Fix a potential use memory access beyong the allocation limit
(Keith Busch)
- Fix a multipath vs blktrace NULL pointer dereference (Yanjun
Zhang)
- Fix various problems in handling the Command Supported and
Effects log (Christoph Hellwig)
- Don't allow unprivileged passthrough of commands that don't
transfer data but modify logical block content (Christoph
Hellwig)
- Add a features and quirks policy document (Christoph Hellwig)
- Fix some really nasty code that was correct but made smatch
complain (Sagi Grimberg)
- Use-after-free regression in BFQ from this merge window (Yu)"
* tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
nvme-pci: update sqsize when adjusting the queue depth
nvme: fix setting the queue depth in nvme_alloc_io_tag_set
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
nvme: fix multipath crash caused by flush request when blktrace is enabled
nvme-pci: fix page size checks
nvme-pci: fix mempool alloc size
nvme-pci: fix doorbell buffer value endianness
Linus Torvalds [Fri, 30 Dec 2022 00:48:21 +0000 (16:48 -0800)]
Merge tag 'io_uring-6.2-2022-12-29' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Two fixes for mutex grabbing when the task state is != TASK_RUNNING
(me)
- Check for invalid opcode in io_uring_register() a bit earlier, to
avoid going through the quiesce machinery just to return -EINVAL
later in the process (me)
- Fix for the uapi io_uring header, skipping including time_types.h
when necessary (Stefan)
* tag 'io_uring-6.2-2022-12-29' of git://git.kernel.dk/linux:
uapi:io_uring.h: allow linux/time_types.h to be skipped
io_uring: check for valid register opcode earlier
io_uring/cancel: re-grab ctx mutex after finishing wait
io_uring: finish waiting before flushing overflow entries
Linus Torvalds [Thu, 29 Dec 2022 18:56:13 +0000 (10:56 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Changes that were posted too late for 6.1, or after the release.
x86:
- several fixes to nested VMX execution controls
- fixes and clarification to the documentation for Xen emulation
- do not unnecessarily release a pmu event with zero period
- MMU fixes
- fix Coverity warning in kvm_hv_flush_tlb()
selftests:
- fixes for the ucall mechanism in selftests
- other fixes mostly related to compilation with clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (41 commits)
KVM: selftests: restore special vmmcall code layout needed by the harness
Documentation: kvm: clarify SRCU locking order
KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET
KVM: x86/xen: Documentation updates and clarifications
KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi
KVM: x86/xen: Simplify eventfd IOCTLs
KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_ports
KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly
KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page()
KVM: Delete extra block of "};" in the KVM API documentation
kvm: x86/mmu: Remove duplicated "be split" in spte.h
kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK()
MAINTAINERS: adjust entry after renaming the vmx hyperv files
KVM: selftests: Mark correct page as mapped in virt_map()
KVM: arm64: selftests: Don't identity map the ucall MMIO hole
KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap
KVM: selftests: Use magic value to signal ucall_alloc() failure
KVM: selftests: Disable "gnu-variable-sized-type-not-at-end" warning
KVM: selftests: Include lib.mk before consuming $(CC)
KVM: selftests: Explicitly disable builtins for mem*() overrides
...
Jens Axboe [Thu, 29 Dec 2022 18:31:45 +0000 (11:31 -0700)]
Merge tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme into block-6.2
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix various problems in handling the Command Supported and Effects log
(Christoph Hellwig)
- don't allow unprivileged passthrough of commands that don't transfer
data but modify logical block content (Christoph Hellwig)
- add a features and quirks policy document (Christoph Hellwig)
- fix some really nasty code that was correct but made smatch complain
(Sagi Grimberg)"
* tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
nvme: consult the CSE log page for unprivileged passthrough
Commands like Write Zeros can change the contents of a namespaces without
actually transferring data. To protect against this, check the Commands
Supported and Effects log is supported by the controller for any
unprivileg command passthrough and refuse unprivileged passthrough if the
command has any effects that can change data or metadata.
Note: While the Commands Support and Effects log page has only been
mandatory since NVMe 2.0, it is widely supported because Windows requires
it for any command passthrough from userspace.
Fixes: e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
nvme: also return I/O command effects from nvme_command_effects
To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well. Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set. For other command sets, the Commands Supported and
Effects log is required to be present already.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
nvmet: don't defer passthrough commands with trivial effects to the workqueue
Mask out the "Command Supported" and "Logical Block Content Change" bits
and only defer execution of commands that have non-trivial effects to
the workqueue for synchronous execution. This allows to execute admin
commands asynchronously on controllers that provide a Command Supported
and Effects log page, and will keep allowing to execute Write commands
asynchronously once command effects on I/O commands are taken into
account.
Fixes: c1fef73f793b ("nvmet: add passthru code to process commands") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
nvmet: set the LBCC bit for commands that modify data
Write, Write Zeroes, Zone append and a Zone Reset through
Zone Management Send modify the logical block content of a namespace,
so make sure the LBCC bit is reported for them.
Fixes: b5d0b38c0475 ("nvmet: add Command Set Identifier support") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
docs, nvme: add a feature and quirk policy document
This adds a document about what specification features are supported by
the Linux NVMe driver, and what qualifies for a quirk if an implementation
has problems following the specification.
Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
Takashi Iwai [Wed, 28 Dec 2022 12:57:14 +0000 (13:57 +0100)]
ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
The recent code refactoring for HD-audio HDMI codec driver caused a
regression on AMD/ATI HDMI codecs; namely, PulseAudioand pipewire
don't recognize HDMI outputs any longer while the direct output via
ALSA raw access still works.
The problem turned out that, after the code refactoring, the driver
assumes only the dynamic PCM assignment, and when a PCM stream that
still isn't assigned to any pin gets opened, the driver tries to
assign any free converter to the PCM stream. This behavior is OK for
Intel and other codecs, as they have arbitrary connections between
pins and converters. OTOH, on AMD chips that have a 1:1 mapping
between pins and converters, this may end up with blocking the open of
the next PCM stream for the pin that is tied with the formerly taken
converter.
Also, with the code refactoring, more PCM streams are exposed than
necessary as we assume all converters can be used, while this isn't
true for AMD case. This may change the PCM stream assignment and
confuse users as well.
This patch fixes those problems by:
- Introducing a flag spec->static_pcm_mapping, and if it's set, the
driver applies the static mapping between pins and converters at the
probe time
- Limiting the number of PCM streams per pins, too; this avoids the
superfluous PCM streams
Paolo Bonzini [Wed, 30 Nov 2022 18:11:47 +0000 (13:11 -0500)]
KVM: selftests: restore special vmmcall code layout needed by the harness
Commit 8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values
in vmmcall()/vmcall()", 2022-11-21) broke the svm_nested_soft_inject_test
because it placed a "pop rbp" instruction after vmmcall. While this is
correct and mimics what is done in the VMX case, this particular test
expects a ud2 instruction right after the vmmcall, so that it can skip
over it in the L1 part of the test.
Inline a suitably-modified version of vmmcall() to restore the
functionality of the test.
Fixes: 8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()" Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221130181147.9911-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 28 Dec 2022 11:00:22 +0000 (06:00 -0500)]
Documentation: kvm: clarify SRCU locking order
Currently only the locking order of SRCU vs kvm->slots_arch_lock
and kvm->slots_lock is documented. Extend this to kvm->lock
since Xen emulation got it terribly wrong.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 28 Dec 2022 10:33:41 +0000 (05:33 -0500)]
KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running,
if that happened it could cause a deadlock. This is due to
kvm_xen_eventfd_reset() doing a synchronize_srcu() inside
a kvm->lock critical section.
To avoid this, first collect all the evtchnfd objects in an
array and free all of them once the kvm->lock critical section
is over and th SRCU grace period has expired.
Reported-by: Michal Luczaj <mhal@rbox.co> Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
In a scenario where kcalloc() fails to allocate memory, the futex_waitv
system call immediately returns -ENOMEM without invoking
destroy_hrtimer_on_stack(). When CONFIG_DEBUG_OBJECTS_TIMERS=y, this
results in leaking a timer debug object.
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after function return, kprobe jump optimization
always fails on the functions with such INT3 inside the function body.
(It already checks the INT3 padding between functions, but not inside
the function)
To avoid this issue, as same as kprobes, check whether the INT3 comes
from kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after RET instruction, kprobes always failes to
check the probed instruction boundary by decoding the function body if
the probed address is after such sequence. (Note that some conditional
code blocks will be placed after function return, if compiler decides
it is not on the hot path.)
This is because kprobes expects kgdb puts the INT3 as a software
breakpoint and it will replace the original instruction.
But these INT3 are not such purpose, it doesn't need to recover the
original instruction.
To avoid this issue, kprobes checks whether the INT3 is owned by
kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.
The addition of callthunks_translate_call_dest means that
skip_addr() and patch_dest() can no longer be discarded
as part of the __init section freeing:
Namhyung Kim [Tue, 20 Dec 2022 22:31:40 +0000 (14:31 -0800)]
perf/core: Call LSM hook after copying perf_event_attr
It passes the attr struct to the security_perf_event_open() but it's
not initialized yet.
Fixes: da97e18458fb ("perf_event: Add support for LSM and SELinux checks") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221220223140.4020470-1-namhyung@kernel.org
Colin Ian King [Fri, 2 Dec 2022 13:51:49 +0000 (13:51 +0000)]
perf/x86/amd: fix potential integer overflow on shift of a int
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then passed as a 64 bit function argument. In the case where
i is 32 or more this can lead to an overflow. Avoid this by shifting
using the BIT_ULL macro instead.
Fixes: 471af006a747 ("perf/x86/amd: Constrain Large Increment per Cycle events") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Kim Phillips <kim.phillips@amd.com> Link: https://lore.kernel.org/r/20221202135149.1797974-1-colin.i.king@gmail.com
We can see from above that we wrongly use percpu atomic perf_cgroup_events
to check if we need to perf_cgroup_switch(), which should only be used
when we know this CPU has cgroup events enabled.
The commit bd2756811766 ("perf: Rewrite core context handling") change
to have only one context per-CPU, so we can just use cpuctx->cgrp to
check if this CPU has cgroup events enabled.
So percpu atomic perf_cgroup_events is not needed.
Ravi Bangoria [Fri, 18 Nov 2022 05:15:39 +0000 (10:45 +0530)]
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
inherit_event() returns NULL only when it finds orphaned events
otherwise it returns either valid child_event pointer or an error
pointer. Follow the same when it fails to find pmu_ctx.
Fixes: bd2756811766 ("perf: Rewrite core context handling") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221118051539.820-1-ravi.bangoria@amd.com
David Woodhouse [Mon, 26 Dec 2022 12:03:20 +0000 (12:03 +0000)]
KVM: x86/xen: Documentation updates and clarifications
Most notably, the KVM_XEN_EVTCHN_RESET feature had escaped documentation
entirely. Along with how to turn most stuff off on SHUTDOWN_soft_reset.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221226120320.1125390-6-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Woodhouse [Mon, 26 Dec 2022 12:03:19 +0000 (12:03 +0000)]
KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi
These are (uint64_t)-1 magic values are a userspace ABI, allowing the
shared info pages and other enlightenments to be disabled. This isn't
a Xen ABI because Xen doesn't let the guest turn these off except with
the full SHUTDOWN_soft_reset mechanism. Under KVM, the userspace VMM is
expected to handle soft reset, and tear down the kernel parts of the
enlightenments accordingly.
Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221226120320.1125390-5-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Michal Luczaj [Mon, 26 Dec 2022 12:03:18 +0000 (12:03 +0000)]
KVM: x86/xen: Simplify eventfd IOCTLs
Port number is validated in kvm_xen_setattr_evtchn().
Remove superfluous checks in kvm_xen_eventfd_assign() and
kvm_xen_eventfd_update().
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20221222203021.1944101-3-mhal@rbox.co> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221226120320.1125390-4-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 26 Dec 2022 12:03:17 +0000 (12:03 +0000)]
KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_ports
The evtchnfd structure itself must be protected by either kvm->lock or
SRCU. Use the former in kvm_xen_eventfd_update(), since the lock is
being taken anyway; kvm_xen_hcall_evtchn_send() instead is a reader and
does not need kvm->lock, and is called in SRCU critical section from the
kvm_x86_handle_exit function.
It is also important to use rcu_read_{lock,unlock}() in
kvm_xen_hcall_evtchn_send(), because idr_remove() will *not*
use synchronize_srcu() to wait for readers to complete.
Remove a superfluous if (kvm) check before calling synchronize_srcu()
in kvm_xen_eventfd_deassign() where kvm has been dereferenced already.
Co-developed-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221226120320.1125390-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Woodhouse [Mon, 26 Dec 2022 12:03:16 +0000 (12:03 +0000)]
KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly
In particular, we shouldn't assume that being contiguous in guest virtual
address space means being contiguous in guest *physical* address space.
In dropping the manual calls to kvm_mmu_gva_to_gpa_system(), also drop
the srcu_read_lock() that was around them. All call sites are reached
from kvm_xen_hypercall() which is called from the handle_exit function
with the read lock already held.
Lai Jiangshan [Wed, 7 Dec 2022 12:05:05 +0000 (20:05 +0800)]
kvm: x86/mmu: Remove duplicated "be split" in spte.h
"be split be split" -> "be split"
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20221207120505.9175-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
However, since 58cd407ca4c6 ("KVM: Fix multiple races in gfn=>pfn cache
refresh", 2022-05-25) the code is only relying on the MMU notifier's
invalidation count and sequence number.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20221207120617.9409-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lukas Bulwahn [Mon, 5 Dec 2022 08:20:44 +0000 (09:20 +0100)]
MAINTAINERS: adjust entry after renaming the vmx hyperv files
Commit a789aeba4196 ("KVM: VMX: Rename "vmx/evmcs.{ch}" to
"vmx/hyperv.{ch}"") renames the VMX specific Hyper-V files, but does not
adjust the entry in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file reference in KVM X86 HYPER-V (KVM/hyper-v).
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Fixes: a789aeba4196 ("KVM: VMX: Rename "vmx/evmcs.{ch}" to "vmx/hyperv.{ch}"") Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221205082044.10141-1-lukas.bulwahn@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Fri, 9 Dec 2022 01:53:02 +0000 (01:53 +0000)]
KVM: selftests: Mark correct page as mapped in virt_map()
The loop marks vaddr as mapped after incrementing it by page size,
thereby marking the *next* page as mapped. Set the bit in vpages_mapped
first instead.
Fixes: 56fc7732031d ("KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too") Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221209015307.1781352-4-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Fri, 9 Dec 2022 01:53:04 +0000 (01:53 +0000)]
KVM: arm64: selftests: Don't identity map the ucall MMIO hole
Currently the ucall MMIO hole is placed immediately after slot0, which
is a relatively safe address in the PA space. However, it is possible
that the same address has already been used for something else (like the
guest program image) in the VA space. At least in my own testing,
building the vgic_irq test with clang leads to the MMIO hole appearing
underneath gicv3_ops.
Stop identity mapping the MMIO hole and instead find an unused VA to map
to it. Yet another subtle detail of the KVM selftests library is that
virt_pg_map() does not update vm->vpages_mapped. Switch over to
virt_map() instead to guarantee that the chosen VA isn't to something
else.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221209015307.1781352-6-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 12 Dec 2022 10:36:53 +0000 (05:36 -0500)]
KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap
Explain the meaning of the bit manipulations of vm_vaddr_populate_bitmap.
These correspond to the "canonical addresses" of x86 and other
architectures, but that is not obvious.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Use magic value to signal ucall_alloc() failure
Use a magic value to signal a ucall_alloc() failure instead of simply
doing GUEST_ASSERT(). GUEST_ASSERT() relies on ucall_alloc() and so a
failure puts the guest into an infinite loop.
Use -1 as the magic value, as a real ucall struct should never wrap.
Reported-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable gnu-variable-sized-type-not-at-end so that tests and libraries
can create overlays of variable sized arrays at the end of structs when
using a fixed number of entries, e.g. to get/set a single MSR.
It's possible to fudge around the warning, e.g. by defining a custom
struct that hardcodes the number of entries, but that is a burden for
both developers and readers of the code.
lib/x86_64/processor.c:664:19: warning: field 'header' with variable sized type 'struct kvm_msrs'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs header;
^
lib/x86_64/processor.c:772:19: warning: field 'header' with variable sized type 'struct kvm_msrs'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs header;
^
lib/x86_64/processor.c:787:19: warning: field 'header' with variable sized type 'struct kvm_msrs'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs header;
^
3 warnings generated.
x86_64/hyperv_tlb_flush.c:54:18: warning: field 'hv_vp_set' with variable sized type 'struct hv_vpset'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct hv_vpset hv_vp_set;
^
1 warning generated.
x86_64/xen_shinfo_test.c:137:25: warning: field 'info' with variable sized type 'struct kvm_irq_routing'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_irq_routing info;
^
1 warning generated.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-12-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Include lib.mk before consuming $(CC)
Include lib.mk before consuming $(CC) and document that lib.mk overwrites
$(CC) unless make was invoked with -e or $(CC) was specified after make
(which makes the environment override the Makefile). Including lib.mk
after using it for probing, e.g. for -no-pie, can lead to weirdness.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-11-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Explicitly disable builtins for mem*() overrides
Explicitly disable the compiler's builtin memcmp(), memcpy(), and
memset(). Because only lib/string_override.c is built with -ffreestanding,
the compiler reserves the right to do what it wants and can try to link the
non-freestanding code to its own crud.
/usr/bin/x86_64-linux-gnu-ld: /lib/x86_64-linux-gnu/libc.a(memcmp.o): in function `memcmp_ifunc':
(.text+0x0): multiple definition of `memcmp'; tools/testing/selftests/kvm/lib/string_override.o:
tools/testing/selftests/kvm/lib/string_override.c:15: first defined here
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Fixes: 6b6f71484bf4 ("KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use") Reported-by: Aaron Lewis <aaronlewis@google.com> Reported-by: Raghavendra Rao Ananta <rananta@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-10-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Probe -no-pie with actual CFLAGS used to compile
Probe -no-pie with the actual set of CFLAGS used to compile the tests,
clang whines about -no-pie being unused if the tests are compiled with
-static.
clang: warning: argument unused during compilation: '-no-pie'
[-Wunused-command-line-argument]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-9-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Use proper function prototypes in probing code
Make the main() functions in the probing code proper prototypes so that
compiling the probing code with more strict flags won't generate false
negatives.
<stdin>:1:5: error: function declaration isn’t a prototype [-Werror=strict-prototypes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-8-seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Rename UNAME_M to ARCH_DIR, fill explicitly for x86
Rename UNAME_M to ARCH_DIR and explicitly set it directly for x86. At
this point, the name of the arch directory really doesn't have anything
to do with `uname -m`, and UNAME_M is unnecessarily confusing given that
its purpose is purely to identify the arch specific directory.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Fix a typo in x86-64's kvm_get_cpu_address_width()
Fix a == vs. = typo in kvm_get_cpu_address_width() that results in
@pa_bits being left unset if the CPU doesn't support enumerating its
MAX_PHY_ADDR. Flagged by clang's unusued-value warning.
Fixes: 3bd396353d18 ("KVM: selftests: Add X86_FEATURE_PAE and use it calc "fallback" MAXPHYADDR") Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213001653.3852042-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Use pattern matching in .gitignore
Use pattern matching to exclude everything except .c, .h, .S, and .sh
files from Git. Manually adding every test target has an absurd
maintenance cost, is comically error prone, and leads to bikeshedding
over whether or not the targets should be listed in alphabetical order.
Deliberately do not include the one-off assets, e.g. config, settings,
.gitignore itself, etc as Git doesn't ignore files that are already in
the repository. Adding the one-off assets won't prevent mistakes where
developers forget to --force add files that don't match the "allowed".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Fix divide-by-zero bug in memslot_perf_test
Check that the number of pages per slot is non-zero in get_max_slots()
prior to computing the remaining number of pages. clang generates code
that uses an actual DIV for calculating the remaining, which causes a #DE
if the total number of pages is less than the number of slots.
traps: memslot_perf_te[97611] trap divide error ip:4030c4 sp:7ffd18ae58f0
error:0 in memslot_perf_test[401000+cb000]
Fixes: a69170c65acd ("KVM: selftests: memslot_perf_test: Report optimal memory slots") Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213001653.3852042-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Delete dead code in x86_64/vmx_tsc_adjust_test.c
Delete an unused struct definition in x86_64/vmx_tsc_adjust_test.c.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Define literal to asm constraint in aarch64 as unsigned long
Define a literal '0' asm input constraint to aarch64/page_fault_test's
guest_cas() as an unsigned long to make clang happy.
tools/testing/selftests/kvm/aarch64/page_fault_test.c:120:16: error:
value size does not match register size specified by the constraint
and modifier [-Werror,-Wasm-operand-widths]
:: "r" (0), "r" (TEST_DATA), "r" (guest_test_memory));
^
tools/testing/selftests/kvm/aarch64/page_fault_test.c:119:15: note:
use constraint modifier "w"
"casal %0, %1, [%2]\n"
^~
%w0
Fixes: 35c581015712 ("KVM: selftests: aarch64: Add aarch64/page_fault_test") Cc: Ricardo Koller <ricarkol@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213001653.3852042-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adam Vodopjan [Fri, 9 Dec 2022 09:26:34 +0000 (09:26 +0000)]
ata: ahci: Fix PCS quirk application for suspend
Since kernel 5.3.4 my laptop (ICH8M controller) does not see Kingston
SV300S37A60G SSD disk connected into a SATA connector on wake from
suspend. The problem was introduced in c312ef176399 ("libata/ahci: Drop
PCS quirk for Denverton and beyond"): the quirk is not applied on wake
from suspend as it originally was.
It is worth to mention the commit contained another bug: the quirk is
not applied at all to controllers which require it. The fix commit 09d6ac8dc51a ("libata/ahci: Fix PCS quirk application") landed in 5.3.8.
So testing my patch anywhere between commits c312ef176399 and 09d6ac8dc51a is pointless.
Not all disks trigger the problem. For example nothing bad happens with
Western Digital WD5000LPCX HDD.
Test hardware:
- Acer 5920G with ICH8M SATA controller
- sda: some SATA HDD connnected into the DVD drive IDE port with a
SATA-IDE caddy. It is a boot disk
- sdb: Kingston SV300S37A60G SSD connected into the only SATA port
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
ata1: FORCE: cable set to 80c
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata3.00: disabled
sd 2:0:0:0: rejecting I/O to offline device
ata3.00: detaching (SCSI 2:0:0:0)
sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 2:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
Commit c312ef176399 dropped ahci_pci_reset_controller() which internally
calls ahci_reset_controller() and applies the PCS quirk if needed after
that. It was called each time a reset was required instead of just
ahci_reset_controller(). This patch puts the function back in place.
Fixes: c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond") Signed-off-by: Adam Vodopjan <grozzly@protonmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
nvme: fix setting the queue depth in nvme_alloc_io_tag_set
While the CAP.MQES field in NVMe is a 0s based filed with a natural one
off, we also need to account for the queue wrap condition and fix undo
the one off again in nvme_alloc_io_tag_set. This was never properly
done by the fabrics drivers, but they don't seem to care because there
is no actual physical queue that can wrap around, but it became a
problem when converting over the PCIe driver. Also add back the
BLK_MQ_MAX_DEPTH check that was lost in the same commit.
Fixes: 0da7feaa5913 ("nvme-pci: use the tagset alloc/free helpers") Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Hugh Dickins <hughd@google.com> Link: https://lore.kernel.org/r/20221225103234.226794-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yu Kuai [Mon, 26 Dec 2022 03:06:05 +0000 (11:06 +0800)]
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
Commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'")
will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq()
can free bfqq first, and then call bic_set_bfqq(), which will cause uaf.
Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq().
Chris Chiu [Mon, 26 Dec 2022 11:43:03 +0000 (19:43 +0800)]
ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
The Dell Latiture 3340/3440/3540 laptops with Realtek ALC3204 have
dual codecs and need the ALC1220_FIXUP_GB_DUAL_CODECS to fix the
conflicts of Master controls. The existing headset mic fixup for
Dell is also required to enable the jack sense and the headset mic.
Introduce a new fixup to fix the dual codec and headset mic issues
for particular Dell laptops since other old Dell laptops with the
same codec configuration are already well handled by the fixup in
alc269_fallback_pin_fixup_tbl[].
Artem Egorkine [Sun, 25 Dec 2022 10:57:28 +0000 (12:57 +0200)]
ALSA: line6: fix stack overflow in line6_midi_transmit
Correctly calculate available space including the size of the chunk
buffer. This fixes a buffer overflow when multiple MIDI sysex
messages are sent to a PODxt device.
Artem Egorkine [Sun, 25 Dec 2022 10:57:27 +0000 (12:57 +0200)]
ALSA: line6: correct midi status byte when receiving data from podxt
A PODxt device sends 0xb2, 0xc2 or 0xf2 as a status byte for MIDI
messages over USB that should otherwise have a 0xb0, 0xc0 or 0xf0
status byte. This is usually corrected by the driver on other OSes.
treewide: Convert del_timer*() to timer_shutdown*()
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
Linus Torvalds [Fri, 23 Dec 2022 22:44:08 +0000 (14:44 -0800)]
Merge tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One driver specific change here which handles the case where a SPI
device for some reason tries to change the bus speed during a message
on fsl_spi hardware, this should be very unusual"
* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl_spi: Don't change speed while chipselect is active
Linus Torvalds [Fri, 23 Dec 2022 22:38:00 +0000 (14:38 -0800)]
Merge tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two core fixes here, one for a long standing race which some Qualcomm
systems have started triggering with their UFS driver and another
fixing a problem with supply lookup introduced by the fixes for devm
related use after free issues that were introduced in this merge
window"
* tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: fix deadlock on regulator enable
regulator: core: Fix resolve supply lookup issue
Linus Torvalds [Fri, 23 Dec 2022 20:00:24 +0000 (12:00 -0800)]
Merge tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening fixes from Kees Cook:
- Fix CFI failure with KASAN (Sami Tolvanen)
- Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko)
- Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan
Chancellor)
- Ignore "contents" argument in LoadPin's LSM hook handling
- Fix paste-o in /sys/kernel/warn_count API docs
- Use READ_ONCE() consistently for oops/warn limit reading
* tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
cfi: Fix CFI failure with KASAN
exit: Use READ_ONCE() for all oops/warn limit reads
security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
lkdtm: cfi: Make PAC test work with GCC 7 and 8
docs: Fix path paste-o for /sys/kernel/warn_count
LoadPin: Ignore the "contents" argument of the LSM hooks
* tag 'pstore-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: Properly assign mem_type property
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
Linus Torvalds [Fri, 23 Dec 2022 19:44:20 +0000 (11:44 -0800)]
Merge tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA
allocator, as it copes with that just as badly as the coherent
allocator, and then add a check to make sure no one passes the flag
ever again"
* tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reject GFP_COMP for noncoherent allocations
ALSA: memalloc: don't use GFP_COMP for non-coherent dma allocations
Linus Torvalds [Fri, 23 Dec 2022 19:39:18 +0000 (11:39 -0800)]
Merge tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- improve p9_check_errors to check buffer size instead of msize when
possible (e.g. not zero-copy)
- some more syzbot and KCSAN fixes
- minor headers include cleanup
* tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux:
9p/client: fix data race on req->status
net/9p: fix response size check in p9_check_errors()
net/9p: distinguish zero-copy requests
9p/xen: do not memcpy header into req->rc
9p: set req refcount to zero to avoid uninitialized usage
9p/net: Remove unneeded idr.h #include
9p/fs: Remove unneeded idr.h #include