Registering more then one module at same time was not
possible with previous implementation. Also unregistering
of the module was missing leading to many instability issues
when camera module is ejected when camera is still active.
Sandeep Patil [Tue, 15 Mar 2016 19:28:38 +0000 (12:28 -0700)]
greybus: power_supply: reverse version check for new psy API
Reversing the kernel version check for new power supply APIs will
easily allow us to use older kernels with backported power supply APIs
by defining "CORE_OWNS_PSY_STRUCT" in power supply core header
Testing Done:
- Build tested with arche kernel with backported power supply APIs
- Build tested also with current arche kernel to make sure we build with
3.10 kernels
Axel Haslam [Fri, 11 Mar 2016 12:19:30 +0000 (13:19 +0100)]
greybus: loopback_test: handle SIGINT signal
Adding a default timeout may not be representative of every
usecase for gb_loopback. Also, tests may continue to run
on the driver in case of a timeout.
To avoid adding a default timeout, handle SIGINT so that when the user
presses ctrl-c the test are stoped. The user can still specify a timeout
value with the -O option.
Bryan O'Donoghue [Wed, 16 Mar 2016 11:29:59 +0000 (11:29 +0000)]
greybus: Ensure gb->mutex is held when adding timer
Currently in loopback on the async path we issue an operation and then add
a timer to time-out that operation should it fail to complete. Looking at a
backtrace given in its feasible op_async->pending can be true and
del_timer() can run before add_timer() has run. In the callback handler we
already hold gb->mutex. This patch fixes that potential race by ensuring we
hold gb->mutex both when we are adding and when we are removing the
relevant timer.
Johan Hovold [Wed, 9 Mar 2016 11:20:43 +0000 (12:20 +0100)]
greybus: interface: separate disabling from removal
Separate interface disable from interface removal.
Disabling an interface means tearing down its control connection and
destroying (i.e. deregistering and releasing) its bundles, while
removing it means deregistering and releasing the interface itself.
This is needed to implement controlled module removal, where the module
interfaces are disabled before being physically ejected.
Johan Hovold [Wed, 9 Mar 2016 11:20:41 +0000 (12:20 +0100)]
greybus: interface: move interface-removal helper
Move helper to remove all interfaces of a host-device to the svc code
and call it when removing the svc device as this needs to be coordinated
with flushing the SVC work queue.
Johan Hovold [Wed, 9 Mar 2016 11:20:40 +0000 (12:20 +0100)]
greybus: interface: remove useless spinlock
Remove useless global interface spinlock that appeared to protect the
host-device interface list, but really did not as we are doing lock-less
look-ups by relying on the single-threaded SVC workqueue.
Johan Hovold [Wed, 9 Mar 2016 11:20:39 +0000 (12:20 +0100)]
greybus: interface: disable control connection on initialisation errors
Disable the control connection immediately on any errors during
interface initialisation as there's no need to keep it around for an
interface in an error state.
loopback driver use the send_count variable to know the test progress.
The test may be stopped or change but this variable is never cleaned.
Such situation may break the next run.
gb_loopback_ro_avg_attr() is using "/" to divide two 64-bit integer,
causing a reference to __aeabi_uldivmod() that is not availalbe on 32-bit.
Instead, use do_div().
Axel Haslam [Tue, 8 Mar 2016 09:03:40 +0000 (10:03 +0100)]
greybus: loopback_test: Use timeout argument
Patch "c3b0a32 Loopback_test: use poll instead of inotify"
added a optional argument for the user to specify a timeout value,
but did not use this parameter in the actual poll function. The
default of 30 seconds is always used.
Fix this by actually using the the poll_timeout parameter so the user
can run long tests.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Reviewed-by: Patrick Titiano <ptitiano@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
A patch from created struct gb_control_timesync_enable_request,
but forgot to properly annotate that the fields are little-endian. The
code is correct in treating them this way, so there isn't a bug, but
sparse complains.
Johan Hovold [Thu, 3 Mar 2016 12:34:39 +0000 (13:34 +0100)]
greybus: connection: add CSD connection flag
Add CSD connection flag that can be specified when allocating a
connection to enable Controlled Segment Dropping in favour of E2EFC
which is enabled by default.
Note that most connections are expected to have E2EFC enabled.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Generalise the svc connection-create helper to accept a cport-flags
argument and handle the flags in the connection code instead.
Note that the camera driver currently manages its data connection
directly. We keep E2EFC enabled for now even though it will soon need
to be disabled due to some pending firmware updates.
Simple addition of the TimeSync commands defined in the specification.
Note for the case of timesync_authoritative we're passing the request
structure directly so as not to have to pass eight parameters into the
function.
Adds:
- control.c::timesync_enable(u8 count, u64 frame_time,
u32 strobe_delay, u32 refclk)
Informs an Interface to expect count TimeSync strobe pulses with
strobe_delay milliseconds delay between each strobe. Once enabled
an Interface may not enter a low-power mode which will result in the
reference timer used to track time switching off.
- control.c::timesync_disable(void)
Commands an Interface to immediately halt TimeSync logic. This will allow
an Interface to transition into low-power modes where the reference time
being used for TimeSync may switch off.
- control.c::timesync_authoritative(u64 *frame_time, u8 count)
Used by the AP Module to inform an Interface of the authoritative
TimeSync clock-master time at each strobe pulse. Down-stream clock slaves
shall adjust their local frame-time appropriately based on the
diseminated authoritative frame-time.
greybus: timesync: Add Control and SVC protocol TimeSync operation definitions
This patch adds the protocol command extenions for SVC and Control
protocols to the greybus_protocols definition header consistent with
the greybus-spec.
greybus: timesync: Add Control and SVC TimeSync command/response data definitions
This patch adds the protocol command/response definitions for the SVC and
Control protocols to the greybus_protocols definition header consistent
with the greybus-spec.
Set retries operation was removed from the Greybus specification. Remove
gb_i2c_retries_operation and all other no longer necessary code bits from the
Greybus kernel code.
Signed-off-by: Michael Mogenson <michael.mogenson@leaflabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Set timeout operation was removed from the Greybus specification. Remove
gb_i2c_timeout_operation and all other no longer necessary code bits from the
Greybus kernel code.
Signed-off-by: Michael Mogenson <michael.mogenson@leaflabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Thu, 3 Mar 2016 14:29:39 +0000 (15:29 +0100)]
greybus: loopback: fix double error count
Make sure not count errors during asynchronous tests twice (first in
the timeout handler then again in the completion handler) to avoid
obviously broken error stats such as:
Mark Greer [Mon, 29 Feb 2016 22:31:02 +0000 (15:31 -0700)]
greybus: audio: Split start and stop APBridgeA requests
Provide finer-grained control of the audio streaming on APB1 by
splitting the transmit/receive start and stop requests into prepare,
start, stop, and shutdown.
Axel Haslam [Fri, 26 Feb 2016 10:39:49 +0000 (11:39 +0100)]
greybus: Loopback_test: use poll instead of inotify
Inotify does not handle sysfs events, so use poll instead.
The loopback kernel driver will send a notification when the test is
complete. So, open a poll file descriptor for every enabled device,
and after starting the test, wait for an event from each device.
After all events are received, read the total number of iterations
and make sure the test is complete.
Also, add missing stdint header which was included in inotify.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Axel Haslam [Fri, 26 Feb 2016 10:39:48 +0000 (11:39 +0100)]
greybus: Notify user space only when the test finished.
Currently, user space is notified for every message sent,
but this is not really needed and does not work in the async case
where all messages are sent from the start.
Instead, notify userspace only when all the transfers are complete.
This allows userspace to wait in a poll loop and wakeup only when
the test is finished.
Also, don't use the bundle kobj to send the notification it is
the loopback device that contains the loopback attributes.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark Greer [Sat, 27 Feb 2016 00:04:36 +0000 (17:04 -0700)]
greybus: audio: Register CPorts for specific directions
Currently, it is assumed that all audio data CPorts registered on
APB1 are used for transmitting audio data. That may not always be
true like when a microphone is connected but no speakers. Also,
the current special protocol lacks a way to tell APB1 whether the CPort
being registered is for transmitting, receiving, or both.
Fix by adding a 'direction' field to the register and unregister CPort
requests and define bits indicating which direction (or both) audio
data will go on that CPort.
Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alexandre Bailon [Thu, 25 Feb 2016 17:19:16 +0000 (18:19 +0100)]
greybus: loopback: Fix averaging
Currently, we are adding 0.5 to the average to round the average.
But we are using the remainder to calculate the decimal, so we do not
need to round the average.
In addition, use a u64 type for the remainder to avoid overflow
that might happen when stats->sum value is too big,
usually for requests per seconds and the throughput.
Alexandre Bailon [Thu, 25 Feb 2016 17:19:15 +0000 (18:19 +0100)]
greybus: loopback: Fix throughput calculations
Throughput and requests per second calculations are broken for
asynchronous request.
Instead of calculate the throughput for each iteration,
calculate it once at the end of the test.
In addition, update every seconds the min and the max
for throughput and requests per second.
Alexandre Bailon [Thu, 25 Feb 2016 17:19:14 +0000 (18:19 +0100)]
greybus: loopback: Fix incoherency in calculations in the case of error
Currently, in case the case of error, statistics are updated for
asynchronous but not for an asynchronous operation.
Do not update the statistics in the case of error.
Alexandre Bailon [Thu, 25 Feb 2016 17:19:13 +0000 (18:19 +0100)]
greybus: loopback: Fix calculations error for ping transfers
For the async ping transfer, statistics are counted twice,
once after the after the gb_loopback_async_operation() and
once in the callback.
Only keep the one in the callback.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Reported-by: Johan Hovold <johan@hovoldconsulting.com> Reviewed-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Vaibhav Hiremath [Thu, 25 Feb 2016 11:15:45 +0000 (16:45 +0530)]
greybus: arche-platform: Disable HUB3613 only in APB poweroff fn
HUB3613 configuration, either disable (Standby mode) or enable (HUB mode)
is related to APB. So it makes perfect sense to put both of them
together in one function.
HUB3613 enable happens only at one place, in hub_conf_delayed_work() fn,
but disable is initiated from multiple places.
Move all calls to usb3613_hub_mode_ctrl(false) to apb_poweroff().
Vaibhav Hiremath [Thu, 25 Feb 2016 11:15:44 +0000 (16:45 +0530)]
greybus: arche-platform: Make sure APB power cycles on coldboot
On first wake/detect pulse, everything works fine, as APB would be
in poweroff state initially.
But on subsequent wake/detect pulses, where APB is already in active
state, internal function just returns doing nothing, as it finds that
device is already in active state.
So the solution would be to make sure that, whenever execution reaches
to coldboot, make sure we power cycle it. Power off first, before
powering on.
Interrupt handler takes care of ignoring < 30msec pulses, so we should
be safe here to power cycle APB.
Johan Hovold [Thu, 25 Feb 2016 13:40:24 +0000 (14:40 +0100)]
greybus: operation: add support for short responses
Add support for operations with short responses.
So far we have assumed that the initiator of an operation always knows
the exact size of the expected response. This is however not always the
case and we've worked around this limitation in a couple of places by,
for example, first requesting the size of a resource before fetching the
actual data.
To avoid such workarounds and simplify our protocols, add a
short-response flag that can be set when allocating an operation. When
this flag is set on an operation, core will accept a response that is
shorter than the size of the (pre-allocated) response payload buffer.
For now, we update the response-message payload_size field to reflect
the actual length of the response received.
Vaibhav Hiremath [Wed, 24 Feb 2016 23:07:39 +0000 (04:37 +0530)]
greybus: arche-platform: Disable wake/detect interrupt in poweroff
In poweroff() fn, we are shutting down SVC, so disable interrupt
as well.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Reviewed-by: Michael Scott <michael.scott@linaro.org> Tested-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Vaibhav Hiremath [Wed, 24 Feb 2016 23:07:38 +0000 (04:37 +0530)]
greybus: arche-platform: Set direction of wake/detect gpio in poweroff fn
With support of interrupt based mechanism, gpio is not longer set to
output mode, so gpio_set_value won't work. So use
gpio_direction_output() fn in poweroff(), while setting value on
wake/detect line.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Reviewed-by: Michael Scott <michael.scott@linaro.org> Tested-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Vaibhav Hiremath [Wed, 24 Feb 2016 23:07:37 +0000 (04:37 +0530)]
greybus: arche-platform: Assert wake/detect after SVC reset without delay
Since now driver supports interrupt based mechanism to read events
from SVC over wake/detect line, no need to delay wake/detect assertion.
We can assert wake/detect after SVC reset deassertion, so during boot
itself SVC will start sending wake_out pulses.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Reviewed-by: Michael Scott <michael.scott@linaro.org> Tested-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Vaibhav Hiremath [Wed, 24 Feb 2016 23:07:36 +0000 (04:37 +0530)]
greybus: arche-platform: Enable interrupt support on wake/detect line
This patch enabled interrupt support on events received over wake/detect
line. The driver follows below state machine,
Default: wake/detect line is high (WD_STATE_IDLE)
On Falling edge:
SVC initiates boot (either cold/standby).
On ES3, > 30msec = coldboot, else standby boot.
Driver moves to WD_STATE_BOOT_INIT
On rising edge (> 30msec):
SVC expects APB to coldboot
Driver wakes irq thread which kicks off APB coldboot
(WD_STATE_COLDBOOT_TRIG)
On rising edge (< 30msec):
Driver ignores it, do nothing.
After coldboot of APB, HUB configuration work is scheduled after 2 sec,
allowing enough time for APB<->SVC/Switch to linkup (in multiple
iterations)
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Reviewed-by: Michael Scott <michael.scott@linaro.org> Tested-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Vaibhav Hiremath [Wed, 24 Feb 2016 23:07:35 +0000 (04:37 +0530)]
greybus: arche-platform: Add wake detect state based on functionality
If driver needs to process wake/detect events from SVC, by enabling
interrupt support on wake/detect event, it becomes easier to maintain
state of wake/detect line based on functionality.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Reviewed-by: Michael Scott <michael.scott@linaro.org> Tested-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Vaibhav Hiremath [Wed, 24 Feb 2016 23:07:34 +0000 (04:37 +0530)]
greybus: arche-platform: Convert delayed work to do only hub3613 configuration
This is preparation of interrupt handling support, where APB coldboot
and wake/detect handling will be handled as response to wake/detect
interrupt.
Due to slower I2C write operations in HUB configuration, it is important
to separate HUB configuration, and probably delay it after APB is
cold booted.
Note that delayed work will be scheduled from interrupt handler,
in following patches.
To satisfy build (and bisect), remove apb_cold_boot() fn, which will be
added back in the patch where it gets used again.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Reviewed-by: Michael Scott <michael.scott@linaro.org> Tested-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Vaibhav Hiremath [Wed, 24 Feb 2016 23:07:33 +0000 (04:37 +0530)]
greybus: arche-apb-ctrl: Remove extra delay in APB reset
With synchronization between SVC <=> AP over wake/detect line to
bring APB's out of reset, we do not need any extra delays now.
So remove it.
Testing Done: Tested for DB3.5 and EVT1.2 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Reviewed-by: Michael Scott <michael.scott@linaro.org> Tested-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Mon, 22 Feb 2016 17:50:56 +0000 (18:50 +0100)]
greybus: Documentation/sysfs: make 1-5 a 2x2 module
Make example module 1-5 a 2x2 module by adding a second, dummy
interface.
This is both an example of how a 2x2 module would be represented and
also suggests what a dummy interface may look like.
A 2x2 module has two child interface devices and a num_interfaces value
of two.
In this example, the secondary interface 1-5.6, is a dummy interface and
therefore lacks the normal identifying attributes (e.g. UniPro DDBL1 and
Ara ids). We may eventually add an interface_type attribute to
facilitate distinguishing various interface types (there may be more
than two).
In the following tree, the bundle attributes and child devices have been
left out:
In this example there are two modules: 1-2 is a 1x2 module with one
interface, and 1-5 is a 2x2 module with two interfaces of which the
second (1-5.6) is a dummy interface.
Johan Hovold [Mon, 22 Feb 2016 17:50:54 +0000 (18:50 +0100)]
greybus: Documentation/sysfs: add module devices
Introduce module devices and rename interface and bundle devices.
Greybus module devices correspond to physical modules and have one or
more interfaces. Modules have an id that is identical to the id of their
primary interface, which in turn is the interface with lowest numbered
id. The module name is constructed from the bus and module id:
<bus_id>-<module_id>
Interfaces and bundles are consequently renamed as
<bus_id>-<module_id>.<interface_id>
and
<bus_id>-<module_id>.<interface_id>.<bundle_id>
respectively.
As before, interface ids (and therefore in a sense now also module ids)
correspond to physical interface positions on the frame.
Modules have the following attributes:
eject
module_id
num_interfaces
where module_id is the id of the module and num_interface the number of
interfaces the module has.
Note that the interface ids of a module's interfaces are expected to be
<module_id>, <module_id + 1>, ..., <module_id + num_interfaces - 1>.
Writing a non-zero argument to eject cleanly shuts down and unregisters
all of the module interfaces before ejecting the module.
The example sysfs tree now looks as follows with the second bus
(APBridgeA) left out:
where greybus1 is a bus; 1-svc the svc; 1-2, and 1-4 are modules; 1-2.2
and 1-4.4 are (primary) interfaces; and 1-2.2.1, 1-2.2.2, and 1-4.4.2
are bundles.
Note that the svc eject attribute may eventually be renamed force_eject.
greybus: gpio: use bundle device for error messages
Use the bundle device directly in gpio error messages instead of the
gpio device, as they are the same pointer. This will make future gpio
api changes much easier to handle.
The payload size was never verified before parsing the uart header and
neither was the uart-header data size verified against the actual
payload size, something which could lead to information leaks when
passing data beyond the payload buffer to the tty layer.
Also remove the incorrect check against the maximum (tx-buffer) payload
size.
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Fabien Parent [Tue, 23 Feb 2016 17:46:11 +0000 (18:46 +0100)]
greybus: connection: {en,dis}able fct flow in connection management
The AP must enable the FCT flow of APBA once it has received the response
from the AP that the connection between APBA and a module has been setted up.
Disable the flow of FCT tokens when destroying connections.
Fabien Parent [Tue, 23 Feb 2016 17:46:08 +0000 (18:46 +0100)]
greybus: connection: add api to {en,dis}able unipro fct flow
In order to support mailbox-free control cport init on the bridges the AP must
be able to enable/disable the flow of unipro fct tokens. Add a new API that
will enable or disable on APBA the flow of fct tokens.
Vaibhav Hiremath [Mon, 22 Feb 2016 11:57:25 +0000 (17:27 +0530)]
greybus: arche-platform: Avoid doing same thing again in poweroff fn
If user switches from fw_flashing => off mode, then we do not need
to do same things again, for example, clk_disable and wake/detect event,
as while switching to fw_flashing, driver makes sure that device goes
to off state and then brings back in fw_flashing state.
Jacopo Mondi [Tue, 23 Feb 2016 10:22:48 +0000 (11:22 +0100)]
greybus: camera: Add CSI configuration parameters
Add CSI configuration parameters to the configure_stream operation
response.
Currently, only the total number of lines in a second is used to configure the
the AP-Bridge CSI transmitter, all other parameters (number of CSI data
lanes, and CSI bus clock frequency) are kept hard-coded for two reasons:
1) We need to configure the CSI receiver on AP side accordingly to these
settings, before sending them to APB1 CSI transmitter.
2) We cannot use the camera module provided parameters as-is, but use
those information to compute the required bandwidth on the CSI bus, and
configure the # of CSI data lanes, and the CSI bus clock speed in a way that
satisfies that bandwidth requirement.
We forgot to count the size of the uart send data message header when
calculating the maximum size of the buffer that the uart driver could
send in one chunk.
This fixes the math and makes the variable a size_t to match the return
value of the call to gb_operation_get_payload_size_max();
Reported-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Tested-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Fri, 19 Feb 2016 10:27:46 +0000 (15:57 +0530)]
greybus: interface: Add print messages on interface initialization/removal
It might be of interest (to developers at least) to know when an
interface is getting created or removed from the system.
Interface creation message can further contain basic information about
the interface, like its vid/pid and mfg/prod ids.
Now, the interface is created by gb_interface_create(), which doesn't
register the intf->dev to the kernel and so the print message is rather
added to gb_interface_init() where we register the device with the
kernel.
A similar message is added to gb_interface_remove() only when the
interface was earlier initialized.
And this is how the output looks on real insertion/removal of the
module:
Vaibhav Agarwal [Mon, 15 Feb 2016 18:57:28 +0000 (00:27 +0530)]
greybus: audio: schedule workqueue to perform codec cleanup on module removal
In response to codec module removal, user space is reported about
the event. In response to this, ALSA layer will update DAPM route
and cleanup DAPM states.
As a fallback mechanism, kernel can cleanup the DAPM state for codec
module. But, this would cause immediate playback (first trial) to fail,
since DSP is still in inconsistent state.
To avoid such situation, a workqueue is scheduled for codec cleanup
with timeout=50ms.
Thus, normally it is expected from above layers to update routes and
perform cleanup. However, fallback mechanism still holds good after
50ms.
Alexandre Bailon [Wed, 17 Feb 2016 17:21:06 +0000 (18:21 +0100)]
greybus: gb_loopback: Fix throughput calculations
Throughput and requests per second calculations are broken for
asynchronous request.
Instead of calculate the throughput for each iteration,
calculate it once at the end of the test.
projects / mirror_ubuntu-bionic-kernel.git / log