sound/soc/codecs/jz4760.c: In function ‘jz4760_codec_startup’:
sound/soc/codecs/jz4760.c:201:6: error: variable ‘ret’ set but not
used [-Werror=unused-but-set-variable]
201 | int ret;
| ^~~
Mark Brown [Tue, 2 Mar 2021 14:50:45 +0000 (14:50 +0000)]
Merge series "ASoC: Intel: soc-acpi: remove unused TigerLake configurations" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Remove two machine descriptors which were added for development on
Intel RVPs but are no longer used or productized. This will not have
any impact on end-users. The corresponding cleanup was applied in the
SOF topologies.
Mark Brown [Tue, 2 Mar 2021 14:50:44 +0000 (14:50 +0000)]
Merge series "Add I2S-MCC support for Microchip's SAMA7G5" from Codrin Ciubotariu <codrin.ciubotariu@microchip.com>:
SAMA7G5 includes an updated version of I2S-MCC, found previously on
SAM9X60. This controller includes 8 data pins, 4 for playback and 4 for
capture. For I2S and LEFT_J formats, these pins can be used to
send/receive up to 8 audio channels. For DSP_A, with TDM, any pins pair
(DIN/DOUT) from these 4 can be selected to send/receive data. This
version also includes 2 FIFOs (send and receive).
This patch set starts by moving the driver's bindings to yaml and
continues with adding a new compatible for the SAMA7G5 variant, followed
by the changes needed for I2S/LEFT_J support, TDM pin pair selection and
FIFO support, exclusively for SAMA7G5.
Changes in v2:
- moved DT binding conversion patch from the beginning to the end of the
patch serieses
- patches that update the DT binding are modified to change .txt file
instead of .yaml
Codrin Ciubotariu (7):
dt-bindings: mchp,i2s-mcc: Add SAMA7G5 to binding
ASoC: mchp-i2s-mcc: Add compatible for SAMA7G5
ASoC: mchp-i2s-mcc: Add multi-channel support for I2S and LEFT_J
formats
dt-bindings: mchp,i2s-mcc: Add property to specify pin pair for TDM
ASoC: mchp-i2s-mcc: Add support to select TDM pins
ASoC: mchp-i2s-mcc: Add FIFOs support
ASoC: convert Microchip I2SMCC binding to yaml
The skylake driver disabled async suspend to prevent disabling
the DSP before the card was suspended during system suspend.
This code was carried over to the SOF driver. But, there is no
risk of the DSP getting disabled before the card is suspended
with the SOF driver. Therefore, it is safe to enable async suspend
and thereby optimize the system resume time.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210301170157.36584-1-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
The TGL RVP can be configured in many ways. We initially supported a
mixed configuration with RT711 in SoundWire mode and RT1308 in
TDM mode.
However Intel teams no longer have any hardware with this
configuration and there are no commercially-available devices using it
either, so let's remove this entry. The corresponding topology will
also be removed from the SOF tree.
This patch partially reverts Commit d985d208bf8f ("ASoC: Intel: common: add match tables for TGL w/ SoundWire")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Link: https://lore.kernel.org/r/20210301235637.1177525-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Intel: soc-acpi: remove unused TGL table with rt5682 only
This patch partially reverts Commit 095ee71907ea ("ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver").
This commit was added as an enabling patch before the Maxim98373 codec
driver was available. This codec is now fully functional and the
topology with only RT5682 no longer maintained or used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Link: https://lore.kernel.org/r/20210301235637.1177525-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: mchp, i2s-mcc: Add property to specify pin pair for TDM
SAMA7G5's I2S-MCC has 4 pairs of DIN/DOUT pins. Since TDM only uses a
single pair of pins for synchronous capture and playback, the controller
needs to be told which of the pair is connected. This can be mentioned
using the new "microchip,tdm-data-pair" property. The property is optional,
needed only if TDM is used, and if it's missing DIN/DOUT 0 pins will be
used by default.
I2S-MCC found on SAMA7G5 includes 2 FIFOs (capture and playback). When
FIFOs are enabled, bits I2SMCC_ISRA.TXLRDYx and I2SMCC_ISRA.TXRRDYx must
not be used. Bits I2SMCC_ISRB.TXFFRDY and I2SMCC_ISRB.RXFFRDY must be used
instead.
ASoC: mchp-i2s-mcc: Add support to select TDM pins
SAMA7G5's I2S-MCC has 4 pairs of DIN/DOUT pins. Since TDM only uses a
single pair of pins for synchronous capture and playback, the controller
needs to be told which of the pair is connected. This can be mentioned
using the "microchip,tdm-data-pair" property from DT. The property is
optional, useful only if TDM is used. If it's missing, DIN/DOUT 0 pins
will be used by default.
ASoC: mchp-i2s-mcc: Add multi-channel support for I2S and LEFT_J formats
The latest I2S-MCC available in SAMA7G5 supports multi-channel for I2S and
Left-Justified formats. For this, the new version uses 8 (4 * 2) input and
output pins, with each pin being responsible for 2 channels. This sums up
to a total of 8 channels for synchronous capture and playback.
Microchip's new SAMA7G5 includes an updated I2S-MCC compatible with the
previous version found on SAM9X60. The new controller includes 8 (4 * 2)
input and output data pins for up to 8 channels for I2S and Left-Justified
formats.
Mark Brown [Mon, 1 Mar 2021 23:31:55 +0000 (23:31 +0000)]
Merge series "ASoC: rsnd: cleanup ppcheck warning for Renesas sound driver" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Hi Mark, Pierre-Louis
These patches are based on below patch-set which from Pierre-Louis,
and cleanup cppcheck warnings for Rensas sound driver.
[3/5] has Reported-by Pierre-Louis tag.
Mark Brown [Mon, 1 Mar 2021 23:31:48 +0000 (23:31 +0000)]
Merge series "ASoC: fsl: remove cppcheck warnings" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Nothing critical and no functional changes.
The only change that needs attention if the 'fsl_ssi: remove
unnecessary tests' patch, where variables are to zero, then tested to
set register fields. Either the tests are indeed redundant or the
entire programming sequence is incorrect.
Mark Brown [Mon, 1 Mar 2021 23:31:47 +0000 (23:31 +0000)]
Merge series "ASoC: rt*: Constify static structs" from Rikard Falkeborn <rikard.falkeborn@gmail.com>:
Constify a number of static structs that are never modified in RealTek
codecs. The most important patches are the first two, which constifies
snd_soc_dai_ops and sdw_slave_ops, both which contain function pointers.
The other two patches are for good measure, since I was already touching
the code there.
When doing this, I discovered sound/soc/codecs/rt1016.c is not in a
Makefile, so there is not really any way to build it (I added locally to
the Makefile to compile-test my changes). Is this expected or an oversight?
Cezary Rojewski [Mon, 25 Jan 2021 11:54:41 +0000 (12:54 +0100)]
ASoC: Intel: Skylake: Compile when any configuration is selected
Skylake is dependent on SND_SOC_INTEL_SKYLAKE (aka "all SST platforms")
whereas selecting specific configuration such as KBL-only will not
cause driver code to compile. Switch to SND_SOC_INTEL_SKYLAKE_COMMON
dependency so selecting any configuration causes the driver to be built.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Suggested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Fixes: 35bc99aaa1a3 ("ASoC: Intel: Skylake: Add more platform granularity") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20210125115441.10383-1-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Kai Vehmanen [Wed, 24 Feb 2021 14:15:41 +0000 (16:15 +0200)]
ASoC: SOF: Intel: hda: turn off display power in resume
Turn off display power at the end of controller resume flow. This is now
possible with the changes done in commit 87fc20e4a0cb ("ASoC: SOF:
Intel: hda: use hdac_ext fine-grained link management"). As codec driver
is able to request the HDA link to be brought back up, the controller
no longer needs to blindly keep display power enabled.
Co-developed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Keyon Jie <yang.jie@intel.com> Link: https://lore.kernel.org/r/20210224141541.3331254-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Colin Ian King [Fri, 26 Feb 2021 18:56:53 +0000 (18:56 +0000)]
ASoC: Intel: boards: sof-wm8804: add check for PLL setting
Currently the return from snd_soc_dai_set_pll is not checking for
failure, this is the only driver in the kernel that ignores this,
so it probably should be added for sake of completeness. Fix this
by adding an error return check.
Addresses-Coverity: ("Unchecked return value") Fixes: f139546fb7d4 ("ASoC: Intel: boards: sof-wm8804: support for Hifiberry Digiplus boards") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210226185653.1071321-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
Colin Ian King [Mon, 15 Feb 2021 20:05:01 +0000 (20:05 +0000)]
ASoC: codecs: lpass-rx-macro: remove redundant initialization of variable hph_pwr_mode
The variable hph_pwr_mode is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Shengjiu Wang [Mon, 22 Feb 2021 08:40:20 +0000 (16:40 +0800)]
ASoC: fsl_sai: Add pm qos cpu latency support
On SoCs such as i.MX7ULP, cpuidle has some levels which
may disable system/bus clocks, so need to add pm_qos to
prevent cpuidle from entering low level idles and make sure
system/bus clocks are enabled when sai is active.
ASoC: constify of_phandle_args in snd_soc_get_dai_name()
The pointer to of_phandle_args passed to snd_soc_get_dai_name() and
of_xlate_dai_name() implementations is not modified. Since it is being
used only to translate passed OF node to a DAI name, it should not be
modified, so mark it as const for correctness and safer code.
sound/soc/sh/rcar/adg.c:67:9: style: The scope of the variable 'ratio' can be reduced. [variableScope]
int i, ratio;
^
sound/soc/sh/rcar/adg.c:114:6: style: The scope of the variable 'idx' can be reduced. [variableScope]
int idx, sel, div, step;
^
sound/soc/sh/rcar/adg.c:114:21: style: The scope of the variable 'step' can be reduced. [variableScope]
int idx, sel, div, step;
^
sound/soc/sh/rcar/adg.c:397:14: style: The scope of the variable 'clk' can be reduced. [variableScope]
struct clk *clk;
^
sound/soc/sh/rcar/cmd.c:46:20: style: The scope of the variable 'src' can be reduced. [variableScope]
struct rsnd_mod *src;
^
sound/soc/sh/rcar/cmd.c:47:27: style: The scope of the variable 'tio' can be reduced. [variableScope]
struct rsnd_dai_stream *tio;
^
sound/soc/sh/rcar/cmd.c:145:13: style: The scope of the variable 'ret' can be reduced. [variableScope]
int i, nr, ret;
^
sound/soc/sh/rcar/core.c:233:26: style: The scope of the variable 'io' can be reduced. [variableScope]
struct rsnd_dai_stream *io;
^
sound/soc/sh/rcar/core.c:489:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/core.c:1064:9: style: The scope of the variable 'j' can be reduced. [variableScope]
int i, j;
^
sound/soc/sh/rcar/core.c:1143:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/core.c:1261:22: style: The scope of the variable 'playback' can be reduced. [variableScope]
struct device_node *playback, *capture;
^
sound/soc/sh/rcar/core.c:1261:33: style: The scope of the variable 'capture' can be reduced. [variableScope]
struct device_node *playback, *capture;
^
sound/soc/sh/rcar/core.c:1419:29: style: The scope of the variable 'be_params' can be reduced. [variableScope]
struct snd_pcm_hw_params *be_params;
^
sound/soc/sh/rcar/core.c:1369:22: style: Local variable 'rdai' shadows outer variable [shadowVariable]
struct rsnd_dai *rdai = rsnd_rdai_get(priv, dai_i);
^
sound/soc/sh/rcar/core.c:1338:19: note: Shadowed declaration
struct rsnd_dai *rdai;
^
sound/soc/sh/rcar/core.c:1369:22: note: Shadow variable
struct rsnd_dai *rdai = rsnd_rdai_get(priv, dai_i);
^
sound/soc/sh/rcar/core.c:1380:22: style: Local variable 'rdai' shadows outer variable [shadowVariable]
struct rsnd_dai *rdai = rsnd_rdai_get(priv, dai_i);
^
sound/soc/sh/rcar/ssi.c:170:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/ssi.c:535:6: style: The scope of the variable 'i' can be reduced. [variableScope]
int i;
^
sound/soc/sh/rcar/ssi.c:1212:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/ssi.c:328:16: portability: Shifting signed 32-bit value by 31 bits is implementation-defined behaviour [shiftTooManyBitsSigned]
ssi->cr_clk = FORCE | rsnd_rdai_width_to_swl(rdai) |
^
sound/soc/sh/rcar/ssi.c:387:12: portability: Shifting signed 32-bit value by 31 bits is implementation-defined behaviour [shiftTooManyBitsSigned]
cr_own |= FORCE | rsnd_rdai_width_to_swl(rdai);
^
sound/soc/sh/rcar/ssiu.c:212:10: style: The scope of the variable 'shift' can be reduced. [variableScope]
int i, shift;
^
sound/soc/sh/rcar/ssiu.c:337:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/ssiu.c:362:22: style: The scope of the variable 'np' can be reduced. [variableScope]
struct device_node *np;
^
sound/soc/sh/rcar/ssiu.c:363:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/ssiu.c:366:6: style: The scope of the variable 'i' can be reduced. [variableScope]
int i;
^
sound/soc/sh/rcar/ssiu.c:397:13: style: The scope of the variable 'ret' can be reduced. [variableScope]
int i, nr, ret;
^
Julia Lawall [Sat, 13 Feb 2021 10:19:07 +0000 (11:19 +0100)]
ASoC: fsl: drop unneeded snd_soc_dai_set_drvdata
snd_soc_dai_set_drvdata is not needed when the set data comes from
snd_soc_dai_get_drvdata or dev_get_drvdata. The problem was fixed
usingthe following semantic patch: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,e;
@@
x = dev_get_drvdata(y->dev)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
@@
expression x,y,e;
@@
x = snd_soc_dai_get_drvdata(y)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
// </smpl>
Julia Lawall [Sat, 13 Feb 2021 10:19:06 +0000 (11:19 +0100)]
ASoC: sun4i-i2s: drop unneeded snd_soc_dai_set_drvdata
snd_soc_dai_set_drvdata is not needed when the set data comes from
snd_soc_dai_get_drvdata or dev_get_drvdata. The problem was fixed
usingthe following semantic patch: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,e;
@@
x = dev_get_drvdata(y->dev)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
@@
expression x,y,e;
@@
x = snd_soc_dai_get_drvdata(y)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
// </smpl>
Julia Lawall [Sat, 13 Feb 2021 10:19:05 +0000 (11:19 +0100)]
ASoC: mxs-saif: drop unneeded snd_soc_dai_set_drvdata
snd_soc_dai_set_drvdata is not needed when the set data comes from
snd_soc_dai_get_drvdata or dev_get_drvdata. The problem was fixed
usingthe following semantic patch: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,e;
@@
x = dev_get_drvdata(y->dev)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
@@
expression x,y,e;
@@
x = snd_soc_dai_get_drvdata(y)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
// </smpl>
In this case, the whole probe function then does nothing, so drop it.
Julia Lawall [Sat, 13 Feb 2021 10:19:04 +0000 (11:19 +0100)]
ASoC: mmp-sspa: drop unneeded snd_soc_dai_set_drvdata
snd_soc_dai_set_drvdata is not needed when the set data comes from
snd_soc_dai_get_drvdata or dev_get_drvdata. The problem was fixed
usingthe following semantic patch: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,e;
@@
x = dev_get_drvdata(y->dev)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
@@
expression x,y,e;
@@
x = snd_soc_dai_get_drvdata(y)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
// </smpl>
sound/soc/sh/siu_pcm.c:375:5: style: Redundant initialization for
'rt'. The initialized value is overwritten before it is
read. [redundantInitialization]
sound/soc/sh/rcar/ssi.c:403:6: style: Redundant initialization for
'wsr'. The initialized value is overwritten before it is
read. [redundantInitialization]
wsr = ssi->wsr;
^
sound/soc/sh/rcar/ssi.c:372:11: note: wsr is initialized
u32 wsr = ssi->wsr;
^
sound/soc/sh/rcar/ssi.c:403:6: note: wsr is overwritten
wsr = ssi->wsr;
^
sound/soc/sh/rcar/ctu.c:212:6: style: Variable 'ret' is reassigned a
value before the old one has been used. [redundantAssignment]
ret = rsnd_kctrl_new_m(mod, io, rtd, "CTU SV0",
^
sound/soc/sh/rcar/ctu.c:205:6: note: ret is assigned
ret = rsnd_kctrl_new_m(mod, io, rtd, "CTU Pass",
^
sound/soc/sh/rcar/ctu.c:212:6: note: ret is overwritten
ret = rsnd_kctrl_new_m(mod, io, rtd, "CTU SV0",
^
All the kcontrol creations are checked for errors, except for one. Add
the missing error check.
sound/soc/sh/rcar/core.c:219:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/sh/rcar/core.c:210:6: note: If condition 'ret' is true, the
function will return/exit
if (ret)
^
sound/soc/sh/rcar/core.c:219:9: note: Returning identical expression
'ret'
return ret;
^
sound/soc/soc-pcm.c:2398:7: style: Variable 'ret' is reassigned a
value before the old one has been used. [redundantAssignment]
ret = -EINVAL;
^
sound/soc/soc-pcm.c:2395:7: note: ret is assigned
ret = -EINVAL;
^
sound/soc/soc-pcm.c:2398:7: note: ret is overwritten
ret = -EINVAL;
^
sound/soc/samsung/snow.c:112:2: style:inconclusive: Found duplicate
branches for 'if' and 'else'. [duplicateBranch]
if (rtd->num_codecs > 1)
^
sound/soc/samsung/snow.c:114:2: note: Found duplicate branches for
'if' and 'else'.
else
^
sound/soc/samsung/snow.c:112:2: note: Found duplicate branches for
'if' and 'else'.
if (rtd->num_codecs > 1)
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Fixes: 7de6b6bc1a58 ("ASoC: samsung: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer") Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20210219230918.5058-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/samsung/smdk_wm8994.c:179:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = devm_snd_soc_register_card(&pdev->dev, card);
^
sound/soc/samsung/smdk_wm8994.c:166:8: note: ret is assigned
ret = -EINVAL;
^
sound/soc/samsung/smdk_wm8994.c:179:6: note: ret is overwritten
ret = devm_snd_soc_register_card(&pdev->dev, card);
^
The initial authors bothered to set ret to -EINVAL and throw a
dev_err() message, so it looks like there is a missing return to avoid
continuing if the property is missing.
sound/soc/samsung/s3c24xx_simtec.c:191:7: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
^
Looking at the code, it's not clear why the return value is checked in
the two other cases but not here, so mirror the behavior and add a
check.
dpcm_fe_dai_startup() (= A) calls dpcm_set_fe_runtime() (= B) to setup
DPCM runtime. From *naming point of view*, it sounds like setup function
for FE.
(A) static int dpcm_fe_dai_startup(...)
{
...
(B) dpcm_set_fe_runtime(...);
...
}
But in dpcm_set_fe_runtime() (= B),
It setups FE by dpcm_runtime_setup_fe() (= X),
and setups BE by dpcm_runtime_merge_xxx() (= Y).
dpcm_fe_dai_startup() (= A) calls dpcm_set_fe_runtime() (= B) to setup
DPCM runtime. From *naming point of view*, it sounds like setup function
for FE.
(A) static int dpcm_fe_dai_startup(...)
{
...
(B) dpcm_set_fe_runtime(...);
...
}
But in dpcm_set_fe_runtime() (= B),
It setups FE by dpcm_runtime_setup_fe() (= X),
and setups BE by dpcm_runtime_merge_xxx() (= Y).
dpcm_fe_dai_startup() (= A) calls dpcm_set_fe_runtime() (= B) to setup
DPCM runtime. From *naming point of view*, it sounds like setup function
for FE.
(A) static int dpcm_fe_dai_startup(...)
{
...
(B) dpcm_set_fe_runtime(...);
...
}
But in dpcm_set_fe_runtime() (= B),
It setups FE by for_each loop (= X),
and setups BE by dpcm_runtime_merge_xxx() (= Y).
If this for_each_rtd_cpu_dais() loop (= C) calls
dpcm_init_runtime_hw() (= A) multiple times, this means it is Multi-CPU.
If we focus to format operation at (D), using mask (= D1) is understandable
because it restricts unsupported format.
But, enabling format when zero format case (= D2) is very strange,
because it might enables unsupported format.
This runtime->hw.formats is initialized by ULLONG_MAX at soc_pcm_hw_init(),
thus becoming zero format means it can't use such format.
And doing this strange format operation is only here.
This patch removes strange format operation (= D2), and use standard
soc_pcm_hw_update_format() for it.
sound/soc/fsl/p1022_ds.c:344:6: style: Redundant initialization for
'ret'. The initialized value is overwritten before it is
read. [redundantInitialization]
ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0],
^
sound/soc/fsl/p1022_ds.c:203:10: note: ret is initialized
int ret = -ENODEV;
^
sound/soc/fsl/p1022_ds.c:344:6: note: ret is overwritten
ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0],
^
sound/soc/fsl/mpc8610_hpcd.c:333:6: style: Redundant initialization
for 'ret'. The initialized value is overwritten before it is
read. [redundantInitialization]
ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma",
^
sound/soc/fsl/mpc8610_hpcd.c:193:10: note: ret is initialized
int ret = -ENODEV;
^
sound/soc/fsl/mpc8610_hpcd.c:333:6: note: ret is overwritten
ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma",
^
ASoC: fsl: mpc5200: signed parameter in snprintf format
cppcheck warning:
sound/soc/fsl/mpc5200_dma.c:414:2: warning: %u in format
string (no. 1) requires 'unsigned int' but the argument type is
'signed int'. [invalidPrintfArgType_uint]
snprintf(psc_dma->name, sizeof psc_dma->name, "PSC%u", psc_dma->id);
^
Also fix sizeof use, missing parentheses reported by checkpatch.pl
sound/soc/fsl/fsl_easrc.c:751:53: style: Variable 'st2_mem_alloc' is
assigned a value that is never used. [unreadVariable]
int st1_chanxexp, st1_mem_alloc = 0, st2_mem_alloc = 0;
^
sound/soc/fsl/fsl_easrc.c:1331:11: style: Variable 'size' is assigned
a value that is never used. [unreadVariable]
int size = 0;
^
Rikard Falkeborn [Wed, 24 Feb 2021 21:19:16 +0000 (22:19 +0100)]
ASoC: rt*: Constify static struct snd_soc_dai_ops
The only usage of them is to assign their address to the ops field in
the snd_soc_dai_driver struct, which is a pointer to const. Make them
const to allow the compiler to put them in read-only memory.
Rikard Falkeborn [Wed, 24 Feb 2021 21:19:15 +0000 (22:19 +0100)]
ASoC: rt*: Constify static struct sdw_slave_ops
The only usage of these is to assign their address to the ops field in
the sdw_driver struct, which is a pointer to const. Make them const to
allow the compiler to put them in read-only memory.
sound/soc/codecs/lpass-wsa-macro.c:958:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = wsa_macro_set_prim_interpolator_rate(dai, (u8) rate_val, sample_rate);
^
sound/soc/codecs/lpass-wsa-macro.c:946:6: note: ret is assigned
ret = wsa_macro_set_mix_interpolator_rate(dai, (u8) rate_val, sample_rate);
^
sound/soc/codecs/lpass-wsa-macro.c:958:6: note: ret is overwritten
ret = wsa_macro_set_prim_interpolator_rate(dai, (u8) rate_val, sample_rate);
^
set_mix_interpolator_rate can return -EINVAL, add a test and bail on error.
sound/soc/codecs/wcd934x.c:1571:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/codecs/wcd934x.c:1568:6: note: If condition 'ret' is true,
the function will return/exit
if (ret)
^
sound/soc/codecs/wcd934x.c:1571:9: note: Returning identical
expression 'ret'
return ret;
^
sound/soc/codecs/wcd9335.c:5216:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/codecs/wcd9335.c:5211:6: note: If condition 'ret' is true,
the function will return/exit
if (ret)
^
sound/soc/codecs/wcd9335.c:5216:9: note: Returning identical
expression 'ret'
return ret;
^
sound/soc/qcom/qdsp6/q6afe.c:848:25: note: Assignment 'p=NULL',
assigned value is 0
struct q6afe_port *p = NULL;
^
sound/soc/qcom/qdsp6/q6afe.c:854:7: note: Null pointer dereference
if (p->token == token) {
^
sound/soc/qcom/qdsp6/q6afe.c:939:8: style: Redundant initialization
for 'wait'. The initialized value is overwritten before it is
read. [redundantInitialization]
wait = &port->wait;
^
sound/soc/qcom/qdsp6/q6afe.c:933:26: note: wait is initialized
wait_queue_head_t *wait = &port->wait;
^
sound/soc/qcom/qdsp6/q6afe.c:939:8: note: wait is overwritten
wait = &port->wait;
^
sound/soc/qcom/qdsp6/q6afe.c:1191:10: style: Redundant initialization
for 'port_id'. The initialized value is overwritten before it is
read. [redundantInitialization]
port_id = port->id;
^
sound/soc/qcom/qdsp6/q6afe.c:1186:14: note: port_id is initialized
int port_id = port->id;
^
sound/soc/qcom/qdsp6/q6afe.c:1191:10: note: port_id is overwritten
port_id = port->id;
^
sound/soc/qcom/lpass-hdmi.c:189:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/qcom/lpass-hdmi.c:186:6: note: If condition 'ret' is true,
the function will return/exit
if (ret)
^
sound/soc/qcom/lpass-hdmi.c:189:9: note: Returning identical
expression 'ret'
return ret;
^
sound/soc/qcom/lpass-hdmi.c:206:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/qcom/lpass-hdmi.c:203:6: note: If condition 'ret' is true,
the function will return/exit
if (ret)
^
sound/soc/qcom/lpass-hdmi.c:206:9: note: Returning identical
expression 'ret'
return ret;
^
Mark Brown [Tue, 9 Mar 2021 19:04:28 +0000 (19:04 +0000)]
Merge series "ASoC: sdm845: array out of bound issues" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
During testing John Stultz and Amit reported few array our bound issues
after enabling bound sanitizer
This patch series attempts to fix those!
changes since v1:
- make sure the wcd is not de-referenced without intialization
Srinivas Kandagatla (3):
ASoC: qcom: sdm845: Fix array out of bounds access
ASoC: qcom: sdm845: Fix array out of range on rx slim channels
ASoC: codecs: wcd934x: add a sanity check in set channel map
ASoC: codecs: wcd934x: add a sanity check in set channel map
set channel map can be passed with a channel maps, however if
the number of channels that are passed are more than the actual
supported channels then we would be accessing array out of bounds.
So add a sanity check to validate these numbers!
Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210309142129.14182-4-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: qcom: sdm845: Fix array out of range on rx slim channels
WCD934x has only 13 RX SLIM ports however we are setting it as 16
in set_channel_map, this will lead to array out of bounds error!
Orignally caught by enabling USBAN array out of bounds check:
Fixes: 5caf64c633a3 ("ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210309142129.14182-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: qcom: sdm845: Fix array out of bounds access
Static analysis Coverity had detected a potential array out-of-bounds
write issue due to the fact that MAX AFE port Id was set to 16 instead
of using AFE_PORT_MAX macro.
Fix this by properly using AFE_PORT_MAX macro.
Fixes: 1b93a8843147 ("ASoC: qcom: sdm845: handle soundwire stream") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210309142129.14182-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Mon, 8 Mar 2021 16:03:32 +0000 (16:03 +0000)]
Merge series "Report jack and button detection + Capture Support" from Lucas Tanure <tanureal@opensource.cirrus.com>:
Hi All,
Here is a patch series for reporting to user space jack and button events and
add the support for Capture. With some cleanups and fixes along the way.
Regards,
Lucas Tanure
Lucas Tanure (12):
ASoC: cs42l42: Fix Bitclock polarity inversion
ASoC: cs42l42: Fix channel width support
ASoC: cs42l42: Fix mixer volume control
ASoC: cs42l42: Don't enable/disable regulator at Bias Level
ASoC: cs42l42: Always wait at least 3ms after reset
ASoC: cs42l42: Remove power if the driver is being removed
ASoC: cs42l42: Disable regulators if probe fails
ASoC: cs42l42: Provide finer control on playback path
ASoC: cs42l42: Set clock source for both ways of stream
ASoC: cs42l42: Add Capture Support
ASoC: cs42l42: Report jack and button detection
ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called
Richard Fitzgerald (3):
ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT
ASoC: cs42l42: Only start PLL if it is needed
ASoC: cs42l42: Wait for PLL to lock before switching to it
Peter Robinson [Sun, 7 Mar 2021 16:23:37 +0000 (16:23 +0000)]
ASoC: remove remnants of sirf prima/atlas audio codec
In 61fbeb5 the sirf prima/atlas drivers were removed. This cleans
up a stray header and some Kconfig entries for the codec that
were missed in the process.
Fixes: 61fbeb5dcb3d (ASoC: remove sirf prima/atlas drivers) Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210307162338.1160604-1-pbrobinson@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Attempting to use the RX MIX path at 48kHz plays at 96kHz, because these
controls are incorrectly toggling the first bit of the register, which
is part of the FS_RATE field.
Fix the problem by using the same method used by the "WSA RX_MIX EC0_MUX"
control, which is to use SND_SOC_NOPM as the register and use an enum in
the shift field instead.
Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210305005049.24726-1-jonathan@marek.ca Signed-off-by: Mark Brown <broonie@kernel.org>
Jonathan Marek [Thu, 4 Mar 2021 21:56:46 +0000 (16:56 -0500)]
ASoC: codecs: lpass-va-macro: mute/unmute all active decimators
An interface can have multiple decimators enabled, so loop over all active
decimators. Otherwise only one channel will be unmuted, and other channels
will be zero. This fixes recording from dual DMIC as a single two channel
stream.
Also remove the now unused "active_decimator" field.
Fixes: 908e6b1df26e ("ASoC: codecs: lpass-va-macro: Add support to VA Macro") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210304215646.17956-1-jonathan@marek.ca Signed-off-by: Mark Brown <broonie@kernel.org>