Leann Ogasawara [Thu, 10 Jun 2010 21:51:51 +0000 (14:51 -0700)]
USB: option: Remove duplicate AMOI_VENDOR_ID
AMOI_VENDOR_ID is defined twice. Remove the duplicate entry and move
the AMOI_PRODUCT_9508 definition to be grouped with the other AMOI
product definitions.
This patch will enable Per-port event feature defined in EHCI 1.1
addendum. This feature addresses an issue where HCD is currently
required to read and parse PORTSC for all enabled root hub ports. With
this patch, the overhead will be reduced.
Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alek Du [Fri, 4 Jun 2010 07:47:55 +0000 (15:47 +0800)]
USB: EHCI: EHCI 1.1 addendum: Basic LPM feature support
With this patch, the LPM capable EHCI host controller can put device
into L1 sleep state which is a mode that can enter/exit quickly, and
reduce power consumption.
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alek Du [Fri, 4 Jun 2010 07:47:54 +0000 (15:47 +0800)]
USB: EHCI: EHCI 1.1 addendum: preparation
EHCI 1.1 addendum introduced several energy efficiency extensions for
EHCI USB host controllers:
1. LPM (link power management)
2. Per-port change
3. Shorter periodic frame list
4. Hardware prefetching
This patch is intended to define the HW bits and debug interface for
EHCI 1.1 addendum. The LPM and Per-port change patches will be sent out
after this patch.
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Fri, 21 May 2010 21:08:21 +0000 (17:08 -0400)]
USB: EHCI: make CONFIG_USB_EHCI_TT_NEWSCHED default to Y
This patch (as1382) changes the USB_EHCI_TT_NEWSCHED Kconfig option to
be non-experimental and to default to Y. This option has existed for
a long time, and I have not heard any complaints concerning it. By
contrast, several people have reported that their devices could be
made to work only by enabling the option.
The point of changing the default is to cause the option to be enabled
by distros that simply use the default settings for esoteric things
like this.
This change was motivated by Bugzilla #15649.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Sharp [Mon, 7 Jun 2010 16:11:33 +0000 (09:11 -0700)]
USB: xhci: Remove obsolete debugging printk.
When code to manipulate the command register was refactored from
xhci_run() to xhci_start(), a debugging statement was left behind that no
longer applies. Remove that statement.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Wed, 9 Jun 2010 21:34:39 +0000 (17:34 -0400)]
USB: UHCI: acquire spinlock before calling start_rh()
This patch (as1392) fixes a bug in uhci-hcd: The start_rh() routine is
supposed to be called with the private spinlock held. If an IRQ comes
in at just the wrong time, the driver will think the controller has
died when in fact it simply hasn't start yet.
The patch also addresses some issues that may prevent an URB from
being unlinked after the controller has stopped. This is an abnormal
occurrence (ordinarily the controller stops only when the entire bus
is suspended and hence there are no active URBs), so the pathways
haven't gotten much testing. These two changes may be a little more
than is strictly necessary, but clearly they won't hurt.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Wed, 9 Jun 2010 21:34:27 +0000 (17:34 -0400)]
USB: add check to detect host controller hardware removal
This patch (as1391) fixes a problem that can occur when USB host
controller hardware is hot-unplugged. If no interrupts are generated
by the unplug then the HCD may not realize that the controller is
gone, and the subsequent unbind may hang waiting for interrupts that
never arrive.
The solution (for PCI-based controllers) is to call the HCD's
interrupt handler at the start of usb_hcd_pci_remove(). If the
hardware is gone, the handler will realize this when it tries to read
the controller's status register.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Wed, 9 Jun 2010 21:34:17 +0000 (17:34 -0400)]
USB: don't stop root-hub status polls too soon
This patch (as1390) fixes a problem that crops up when a UHCI host
controller is unbound from uhci-hcd while there are still some active
URBs. The URBs have to be unlinked when the root hub is unregistered,
and uhci-hcd relies upon root-hub status polls as part of its
unlinking procedure. But usb_hcd_poll_rh_status() won't make those
status calls if hcd->rh_registered is clear, and the flag is cleared
_before_ the unregistration takes place.
Since hcd->rh_registered is used for other things and needs to be
cleared early, the solution is to add a new flag (rh_pollable) and use
it instead. It gets cleared _after_ the root hub is unregistered.
Now that the status polls don't end too soon, we have to make sure
they also don't occur too late -- after the root hub's usb_device
structure or the HCD's private structures are deallocated. Therefore
the patch adds usb_get_device() and usb_put_device() calls to protect
the root hub structure, and it adds an extra del_timer_sync() to
prevent the root-hub timer from causing an unexpected status poll.
This additional complexity would not be needed if the HCD framework
had provided separate stop() and release() callbacks instead of just
stop(). This lack could be fixed at some future time (although it
would require changes to every host controller driver); when that
happens this patch won't be needed any more.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Wed, 9 Jun 2010 21:34:05 +0000 (17:34 -0400)]
USB: fix failure path in usb_add_hcd()
This patch (as1389) fixes some errors in the failure pathway of
usb_add_hcd(). The actions it takes ought to be exactly the same as
those taken by usb_remove_hcd(), but they aren't.
In one case (removal of the usb_bus_attr_group), the two routines are
brought into agreement by changing usb_remove_hcd(). All the other
discrepancies are fixed by changing usb_add_hcd().
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Tue, 10 Aug 2010 19:07:51 +0000 (12:07 -0700)]
Merge branch 'writable_limits' of git://decibel.fi.muni.cz/~xslaby/linux
* 'writable_limits' of git://decibel.fi.muni.cz/~xslaby/linux:
unistd: add __NR_prlimit64 syscall numbers
rlimits: implement prlimit64 syscall
rlimits: switch more rlimit syscalls to do_prlimit
rlimits: redo do_setrlimit to more generic do_prlimit
rlimits: add rlimit64 structure
rlimits: do security check under task_lock
rlimits: allow setrlimit to non-current tasks
rlimits: split sys_setrlimit
rlimits: selinux, do rlimits changes under task_lock
rlimits: make sure ->rlim_max never grows in sys_setrlimit
rlimits: add task_struct to update_rlimit_cpu
rlimits: security, add task_struct to setrlimit
Fix up various system call number conflicts. We not only added fanotify
system calls in the meantime, but asm-generic/unistd.h added a wait4
along with a range of reserved per-architecture system calls.
Linus Torvalds [Tue, 10 Aug 2010 18:49:21 +0000 (11:49 -0700)]
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (79 commits)
mtd: Remove obsolete <mtd/compatmac.h> include
mtd: Update copyright notices
jffs2: Update copyright notices
mtd-physmap: add support users can assign the probe type in board files
mtd: remove redwood map driver
mxc_nand: Add v3 (i.MX51) Support
mxc_nand: support 8bit ecc
mxc_nand: fix correct_data function
mxc_nand: add V1_V2 namespace to registers
mxc_nand: factor out a check_int function
mxc_nand: make some internally used functions overwriteable
mxc_nand: rework get_dev_status
mxc_nand: remove 0xe00 offset from registers
mtd: denali: Add multi connected NAND support
mtd: denali: Remove set_ecc_config function
mtd: denali: Remove unuseful code in get_xx_nand_para functions
mtd: denali: Remove device_info_tag structure
mtd: m25p80: add support for the Winbond W25Q32 SPI flash chip
mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chips
mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chips
...
Fix up trivial conflicts in drivers/mtd/maps/{Kconfig,redwood.c} due to
redwood driver removal.
Linus Torvalds [Tue, 10 Aug 2010 18:47:36 +0000 (11:47 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bcopeland/omfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bcopeland/omfs:
omfs: fix uninitialized variable warning
omfs: sanity check cluster size
omfs: refuse to mount if bitmap pointer is obviously wrong
omfs: check bounds on block numbers before passing to sb_bread
omfs: fix memory leak
Linus Torvalds [Tue, 10 Aug 2010 18:39:13 +0000 (11:39 -0700)]
Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify
* 'for-linus' of git://git.infradead.org/users/eparis/notify: (132 commits)
fanotify: use both marks when possible
fsnotify: pass both the vfsmount mark and inode mark
fsnotify: walk the inode and vfsmount lists simultaneously
fsnotify: rework ignored mark flushing
fsnotify: remove global fsnotify groups lists
fsnotify: remove group->mask
fsnotify: remove the global masks
fsnotify: cleanup should_send_event
fanotify: use the mark in handler functions
audit: use the mark in handler functions
dnotify: use the mark in handler functions
inotify: use the mark in handler functions
fsnotify: send fsnotify_mark to groups in event handling functions
fsnotify: Exchange list heads instead of moving elements
fsnotify: srcu to protect read side of inode and vfsmount locks
fsnotify: use an explicit flag to indicate fsnotify_destroy_mark has been called
fsnotify: use _rcu functions for mark list traversal
fsnotify: place marks on object in order of group memory address
vfs/fsnotify: fsnotify_close can delay the final work in fput
fsnotify: store struct file not struct path
...
Fix up trivial delete/modify conflict in fs/notify/inotify/inotify.c.
Linus Torvalds [Tue, 10 Aug 2010 18:26:52 +0000 (11:26 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (59 commits)
igbvf.txt: Add igbvf Documentation
igb.txt: Add igb documentation
e100/e1000*/igb*/ixgb*: Add missing read memory barrier
ixgbe: fix build error with FCOE_CONFIG without DCB_CONFIG
netxen: protect tx timeout recovery by rtnl lock
isdn: gigaset: use after free
isdn: gigaset: add missing unlock
solos-pci: Fix race condition in tasklet RX handling
pkt_sched: Fix sch_sfq vs tcf_bind_filter oops
net: disable preemption before call smp_processor_id()
tcp: no md5sig option size check bug
iwlwifi: fix locking assertions
iwlwifi: fix TX tracer
isdn: fix information leak
net: Fix napi_gro_frags vs netpoll path
usbnet: remove noisy and hardly useful printk
rtl8180: avoid potential NULL deref in rtl8180_beacon_work
ath9k: Remove myself from the MAINTAINERS list
libertas: scan before assocation if no BSSID was given
libertas: fix association with some APs by using extended rates
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
tx493xide: use min_t() macro instead of min()
drivers/ide: Use memdup_user
via82cxxx: fix typo for VT6415 PCIE PATA IDE Host Controller support.
ide-cd: Do not access completed requests in the irq handler
qiaochong [Tue, 10 Aug 2010 00:21:27 +0000 (17:21 -0700)]
drivers/char/vt.c:vc_do_resize(): local var `end' should be unsigned long
According include/linux/console_struct.h,vc_scr_end is unsigned long.
struct vc_data {
unsigned short vc_num; /* Console number */
unsigned int vc_cols; /* [#] Console size */
unsigned int vc_rows;
unsigned int vc_size_row; /* Bytes per row */
unsigned int vc_scan_lines; /* # of scan lines */
unsigned long vc_origin; /* [!] Start of real screen */
unsigned long vc_scr_end; /* [!] End of real screen */
unsigned long vc_visible_origin; /* [!] Top of visible window */
unsigned int vc_top, vc_bottom; /* Scrolling region */
const struct consw *vc_sw;
unsigned short *vc_screenbuf;
...
}
Signed-off-by: qiaochong <qiaochong@loongson.cn> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
qiaochong [Tue, 10 Aug 2010 00:21:23 +0000 (17:21 -0700)]
drivers/char/vt.c: fix vc->vc_origin on take_over_console()
kernel will die on some platform when switch from vga mode to framebuffer
mode. The reason of this bug is that bind_con_driver reset vc->vc_origin
to (unsigned long)vc->vc_screenbuf.
On vgacon vc->vc_origin is not releated to vc->vc_screenbuf,if set
vc->vc_origin to vc->vc_screenbuf,kernel will die on vc_do_resize.
static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
struct vc_data *vc, unsigned int cols, unsigned int lines)
{
unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
unsigned int old_cols, old_rows, old_row_size, old_screen_size;
unsigned int new_cols, new_rows, new_row_size, new_screen_size;
unsigned int end, user;
...
end = (old_rows > new_rows) ? old_origin +
(old_row_size * new_rows) :
vc->vc_scr_end;
...
/*
here for a test from vgacon to framebuffer:
old_origin=0x810814a0,end=0xb00b8fa0,vc->vc_origin=0x810814a0
the code bellow will copy memory from 0x810814a0 to 0xb00b8fa0,
this will cover kernel code,kernel died here.
*/
while (old_origin < end) {
scr_memcpyw((unsigned short *) new_origin,
(unsigned short *) old_origin, rlth);
if (rrem)
scr_memsetw((void *)(new_origin + rlth),
vc->vc_video_erase_char, rrem);
old_origin += old_row_size;
new_origin += new_row_size;
}
rwsem: smaller wrappers around rwsem_down_failed_common
More code can be pushed from rwsem_down_read_failed and
rwsem_down_write_failed into rwsem_down_failed_common.
Following change adding down_read_critical infrastructure support also
enjoys having flags available in a register rather than having to fish it
out in the struct rwsem_waiter...
Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Mike Waychison <mikew@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Ying Han <yinghan@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rwsem: wake queued readers when writer blocks on active read lock
This change addresses the following situation:
- Thread A acquires the rwsem for read
- Thread B tries to acquire the rwsem for write, notices there is already
an active owner for the rwsem.
- Thread C tries to acquire the rwsem for read, notices that thread B already
tried to acquire it.
- Thread C grabs the spinlock and queues itself on the wait queue.
- Thread B grabs the spinlock and queues itself behind C. At this point A is
the only remaining active owner on the rwsem.
In this situation thread B could notice that it was the last active writer
on the rwsem, and decide to wake C to let it proceed in parallel with A
since they both only want the rwsem for read.
Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Mike Waychison <mikew@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Ying Han <yinghan@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rwsem: let RWSEM_WAITING_BIAS represent any number of waiting threads
Previously each waiting thread added a bias of RWSEM_WAITING_BIAS. With
this change, the bias is added only once to indicate that the wait list is
non-empty.
This has a few nice properties which will be used in following changes:
- when the spinlock is held and the waiter list is known to be non-empty,
count < RWSEM_WAITING_BIAS <=> there is an active writer on that sem
- count == RWSEM_WAITING_BIAS <=> there are waiting threads and no
active readers/writers on that sem
Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Mike Waychison <mikew@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Ying Han <yinghan@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rwsem: lighter active count checks when waking up readers
In __rwsem_do_wake(), we can skip the active count check unless we come
there from up_xxxx(). Also when checking the active count, it is not
actually necessary to increment it; this allows us to get rid of the read
side undo code and simplify the calculation of the final rwsem count
adjustment once we've counted the reader threads to wake.
The basic observation is the following. When there are waiter threads on
a rwsem and the spinlock is held, other threads can only increment the
active count by trying to grab the rwsem in down_xxxx(). However
down_xxxx() will notice there are waiter threads and take the down_failed
path, blocking to acquire the spinlock on the way there. Therefore, a
thread observing an active count of zero with waiters queued and the
spinlock held, is protected against other threads acquiring the rwsem
until it wakes the last waiter or releases the spinlock.
Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Mike Waychison <mikew@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Ying Han <yinghan@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rwsem: fully separate code paths to wake writers vs readers
This is in preparation for later changes in the series.
In __rwsem_do_wake(), the first queued waiter is checked first in order to
determine whether it's a writer or a reader. The code paths diverge at
this point. The code that checks and increments the rwsem active count is
duplicated on both sides - the point is that later changes in the series
will be able to independently modify both sides.
Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Mike Waychison <mikew@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Ying Han <yinghan@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hwmon: f71882fg: add support for the Fintek F71808E
Allow device probing to recognise the Fintek F71808E.
Sysfs interface:
* Fan/pwm control is the same as for F71889FG
* Temperature and voltage sensor handling is largely the same as for
the F71889FG
- Has one temperature sensor less (doesn't have temp3)
- Misses one voltage sensor (doesn't have V6, thus in6_input refers to
what in7_input refers for F71889FG)
For the purpose of the sysfs interface fxxxx_in_temp_attr[] is split up
such that it can largely be reused.
Signed-off-by: Giel van Schijndel <me@mortis.eu> Cc: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
register_hotcpu_notifier() is designed to make these ifdefs unnecessary.
Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chen Gong [Tue, 10 Aug 2010 00:21:10 +0000 (17:21 -0700)]
hwmon: coretemp: documentation update and cleanup
Update coretemp supported CPU TjMax lists and some cleanup work.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If one coretemp device can't be added, it should allow subsequent adding
operation because every new-added device will create a new sysfs group,
not an additional sensor sys entry.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chen Gong [Tue, 10 Aug 2010 00:21:09 +0000 (17:21 -0700)]
hwmon: coretemp: update hotplug condition check
Fix two errors in hotplug. One is for hotplug notifier. The other is
unnecessary driver unregister. Because even none of online cpus supports
coretemp, we can't assume new onlined cpu doesn't support it either. If
related driver is unregistered there we have no chance to use coretemp
from then on.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Tue, 10 Aug 2010 00:21:08 +0000 (17:21 -0700)]
hwmon: add support for JEDEC JC 42.4 compliant temperature sensors
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Tue, 10 Aug 2010 00:21:06 +0000 (17:21 -0700)]
hwmon: driver for SMM665 Six-Channel Active DC Output Controller/Monitor
This driver adds support for the monitoring features of the Summit
Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/hwmon/hdaps.c: add Lenovo Thinkpad T400 to the whitelist
Add Lenovo Thinkpad T400. I have done the testing on my laptop. The
hdaps module detects the device and the hdapsd daemon is able to [un]park
the disk.
Signed-off-by: Ritesh Raj Sarraf <rrs@debian.org> Cc: Frank Seidel <frank@f-seidel.de> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These are caused by checkpatch incorrectly parsing its internal
representation of a statement block for struct's (or anything else that is
a statement block encapsulated in {}'s that also ends with a ';'). Fix
this by properly parsing a statement block.
Patrick Pannuto [Tue, 10 Aug 2010 00:21:02 +0000 (17:21 -0700)]
checkpatch: warn about unexpectedly long msleep's
As explained in Documentation/timers/timers-howto.txt, msleep's of < 20ms
may sleep for as long as 20ms. Caller's of msleep(1) or msleep(2), etc
are likely not to expect this quirky behavior - warn them.
Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patrick Pannuto [Tue, 10 Aug 2010 00:21:01 +0000 (17:21 -0700)]
checkpatch: prefer usleep_range over udelay
When possible, sleeping is (usually) better than delaying; however, don't
bother callers of udelay < 10us, as those cases are generally not worth
the switch to usleep
[akpm@linux-foundation.org: fix mismatched parentheses] Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 10 Aug 2010 00:21:01 +0000 (17:21 -0700)]
checkpatch: add more exceptions to 80 char lines
Add new logging functions netdev_<level> and netif_<level>.
Don't complain if the only thing on a line is a quoted string.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Eloff [Tue, 10 Aug 2010 00:21:00 +0000 (17:21 -0700)]
checkpatch: change externals to globals
Make error message say 'ERROR: do not initialise globals to 0 or NULL'
rather than 'ERROR: do not initialise externals to 0 or NULL'. Makes more
sense in the context since there is an extern keyword in C and that is a
global declaration within the scope of the current file.
Signed-off-by: Joe Eloff <kagen101@gmail.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I've got a false positive when spaces are present at the beginning of a
line.
So I add this check, obviously excluding to check the lines in the middle of
comments.
For instance this code passes the checkpatch test:
+struct davinci_mcbsp_data {
+ unsigned int fmt;
+ int clk_div;
+};
+
+static struct davinci_mcbsp_data mcbsp_data;
Where, before the string "int clk_div", I have 4 spaces (\040
ascii character).
With v2.6.34 scripts/checkpatch.pl script I get:
scripts/checkpatch.pl 0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch
total: 0 errors, 0 warnings, 201 lines checked
0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch has no obvious style
problems and is ready for submission.
That is not correct. Instead with the proposed patch I get:
scripts/checkpatch.pl 0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch
WARNING: please, no space for starting a line,
excluding comments
#63: FILE: sound/soc/davinci/davinci-i2s.c:165:
+ int clk_div;$
WARNING: please, no space for starting a line,
excluding comments
#95: FILE: sound/soc/davinci/davinci-i2s.c:406:
+ return 0;$
total: 0 errors, 2 warnings, 201 lines checked
That is correct.
Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wolfram Sang [Tue, 10 Aug 2010 00:20:57 +0000 (17:20 -0700)]
checkpatch: refactor 'allowed asm includes' and add memory.h
Change the check suggesting replacement of asm-includes with
linux-includes. Exceptions to this rule are easier to extend now. Add
memory.h because ARM has a custom one.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Tue, 10 Aug 2010 00:20:56 +0000 (17:20 -0700)]
flex_array: add helpers to get and put to make pointers easy to use
Getting and putting arrays of pointers with flex arrays is a PITA. You
have to remember to pass &ptr to the _put and you have to do weird and
wacky casting to get the ptr back from the _get. Add two functions
flex_array_get_ptr() and flex_array_put_ptr() to handle all of the magic.
[akpm@linux-foundation.org: simplification suggested by Joe] Signed-off-by: Eric Paris <eparis@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: James Morris <jmorris@namei.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baruch Siach [Tue, 10 Aug 2010 00:20:53 +0000 (17:20 -0700)]
list debugging: warn when deleting a deleted entry
Use the magic LIST_POISON* values to detect an incorrect use of list_del
on a deleted entry. This DEBUG_LIST specific warning is easier to
understand than the generic Oops message caused by LIST_POISON
dereference.
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 10 Aug 2010 00:20:49 +0000 (17:20 -0700)]
MAINTAINERS: add patterns to PS3VRAM DRIVER
Signed-off-by: Joe Perches <joe@perches.com> Cc: Jim Paris <jim@jtan.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 10 Aug 2010 00:20:48 +0000 (17:20 -0700)]
MAINTAINERS: add patterns to OMAP USB
Signed-off-by: Joe Perches <joe@perches.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ben Nizette <bn@niasdigital.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joe Perches <joe@perches.com> Cc: Leo Chen <leochen@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Tue, 10 Aug 2010 00:20:35 +0000 (17:20 -0700)]
char: add WARN_ON() in misc_deregister()
misc_deregister() returns an error only when it attempts to unregister
the device that is not registered. This is the driver's bug.
Most of the drivers don't check the return value of misc_deregister().
(It is not bad thing because most of kernel *_unregister() API always
succeed and do not return value)
So it is better to indicate the error by WARN_ON() in misc_deregister().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Richard Kennedy [Tue, 10 Aug 2010 00:20:34 +0000 (17:20 -0700)]
stop_machine: struct cpu_stopper, remove alignment padding on 64 bits
Reorder elements in structure cpu_stopper to remove alignment padding on
64 bit builds, this shrinks its size from 40 to 32 bytes saving 8 bytes
per cpu.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Acked-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kevin Winchester [Tue, 10 Aug 2010 00:20:32 +0000 (17:20 -0700)]
init/main.c: mark do_one_initcall* as __init_or_module
Andrew Morton suggested that the do_one_initcall and do_one_initcall_debug
functions can be marked __init_or_module such that they can be discarded
for the CONFIG_MODULES=N case.
Signed-off-by: Kevin Winchester <kjwinchester@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Tue, 10 Aug 2010 00:20:30 +0000 (17:20 -0700)]
sys_personality: remove the bogus checks in sys_personality()->__set_personality() path
Cleanup, no functional changes.
- __set_personality() always changes ->exec_domain/personality, the
special case when ->exec_domain remains the same buys nothing but
complicates the code. Unify both cases to simplify the code.
- The -EINVAL check in sys_personality() was never right. If we assume
that set_personality() can fail we should check the value it returns
instead of verifying that task->personality was actually changed.
Remove it. Before the previous patch it was possible to hit this case
due to overflow problems, but this -EINVAL just indicated the kernel
bug.
OTOH, probably it makes sense to change lookup_exec_domain() to return
ERR_PTR() instead of default_exec_domain if the search in exec_domains
list fails, and report this error to the user-space. But this means
another user-space change, and we have in-kernel users which need fixes.
For example, PER_OSF4 falls into PER_MASK for unkown reason and nobody
cares to register this domain.
projects / mirror_ubuntu-eoan-kernel.git / log