]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
11 years agofs/fat: strip "cp" prefix from codepage in display
Dave Reisner [Tue, 18 Dec 2012 00:03:01 +0000 (16:03 -0800)]
fs/fat: strip "cp" prefix from codepage in display

Option parsing code expects an unsigned integer for the codepage option,
but prefixes and stores this option with "cp" before passing to
load_nls().  This makes the displayed option in /proc an invalid one.
Strip the prefix when printing so that the displayed option is valid for
reuse.

Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agofat: ix mount option parsing
Jan Kara [Tue, 18 Dec 2012 00:02:59 +0000 (16:02 -0800)]
fat: ix mount option parsing

parse_options() is supposed to return value < 0 on error however we
returned 0 (success) in a lot of cases.  This actually was not a problem
in practice because match_token() used by parse_options() is clever and
catches most of the problems for us.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agofat: provide option for setting timezone offset
Jan Kara [Tue, 18 Dec 2012 00:02:58 +0000 (16:02 -0800)]
fat: provide option for setting timezone offset

So far FAT either offsets time stamps by sys_tz.minuteswest or leaves them
as they are (when tz=UTC mount option is used).  However in some cases it
is useful if one can specify time stamp offset on his own (e.g.  when time
zone of the camera connected is different from time zone of the computer,
or when HW clock is in UTC and thus sys_tz.minuteswest == 0).

So provide a mount option time_offset= which allows user to specify offset
in minutes that should be applied to time stamps on the filesystem.

akpm: this code would work incorrectly when used via `mount -o remount',
because cached inodes would not be updated.  But fatfs's fat_remount() is
basically a no-op anyway.

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agofat: notify when discard is not supported
Namjae Jeon [Tue, 18 Dec 2012 00:02:56 +0000 (16:02 -0800)]
fat: notify when discard is not supported

Change fatfs so that a warning is emitted when an attempt is made to mount
a filesystem with the unsupported `discard' option.

ext4 aready does this: http://patchwork.ozlabs.org/patch/192668/

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: DA9055 RTC driver
Ashish Jangam [Tue, 18 Dec 2012 00:02:53 +0000 (16:02 -0800)]
rtc: DA9055 RTC driver

A driver for the DA9055 PMIC.  This has a dependency upon the DA9055 MFD
core.

Functionally tested on Samsung SMDKV6410.

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-s3c: use of_match_ptr() macro
Sachin Kamat [Tue, 18 Dec 2012 00:02:52 +0000 (16:02 -0800)]
drivers/rtc/rtc-s3c: use of_match_ptr() macro

This eliminates having an #ifdef returning NULL for the case when OF is
disabled.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-tps65910.c: enable RTC power domain on initialization
Kim, Milo [Tue, 18 Dec 2012 00:02:51 +0000 (16:02 -0800)]
drivers/rtc/rtc-tps65910.c: enable RTC power domain on initialization

Enabling RTC HW block depends on the default value of TPS65910 register.
In some mode, RTC block is disabled by default.(eg.  AM3517 Craneboard) In
this case, RTC_PWDN(RTC power down) bit should be cleared to enable the
RTC HW block.

This patch also works in case that RTC block is active by default, because
there is no side effect even if the bit is updated again.

Tested on AM3517 Craneboard.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Sivaram Nair <sivaramn@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-dev.c: remove unused code from rtc-dev.c
Sachin Kamat [Tue, 18 Dec 2012 00:02:49 +0000 (16:02 -0800)]
drivers/rtc/rtc-dev.c: remove unused code from rtc-dev.c

This code is under #if 0 and not used.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-s3c.c: convert to use devm_* API
Tushar Behera [Tue, 18 Dec 2012 00:02:48 +0000 (16:02 -0800)]
drivers/rtc/rtc-s3c.c: convert to use devm_* API

rtc-s3c driver is modified to use devm_request_and_ioremap() (combining
request_mem_region and ioremap), devm_clk_get() and devm_request_irq()
APIs.  Since this removes the necessity of freeing the related resources
the return path is also simplified.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-s3c.c: remove unnecessary err_nores label
Tushar Behera [Tue, 18 Dec 2012 00:02:45 +0000 (16:02 -0800)]
drivers/rtc/rtc-s3c.c: remove unnecessary err_nores label

err_nores label redirects to a simple return statement.  Move the return
statement to caller location and remove the label.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: add NXP PCF8523 support
Thierry Reding [Tue, 18 Dec 2012 00:02:44 +0000 (16:02 -0800)]
rtc: add NXP PCF8523 support

Add an RTC driver for PCF8523 chips by NXP Semiconductors.  No support is
currently provided for the alarm and interrupt functions.  Only the time
and date functionality is implemented.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: rtc-davinci: use devm_kzalloc()
Devendra Naga [Tue, 18 Dec 2012 00:02:41 +0000 (16:02 -0800)]
rtc: rtc-davinci: use devm_kzalloc()

Use devm_kzalloc() and remove the error path free and the unload free as
devm functions take care of freeing resources.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: rtc-davinci: return correct error code if rtc_device_register() fails
Devendra Naga [Tue, 18 Dec 2012 00:02:39 +0000 (16:02 -0800)]
rtc: rtc-davinci: return correct error code if rtc_device_register() fails

rtc_device_register() returns a pointer containing error code in case
of error.  Use that in the error return.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-tps65910.c: rename irq to match device
Sivaram Nair [Tue, 18 Dec 2012 00:02:37 +0000 (16:02 -0800)]
drivers/rtc/rtc-tps65910.c: rename irq to match device

A cosmetic change to rename the irq name to match the device name.

Signed-off-by: Sivaram Nair <sivaramn@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: rtc-spear: Provide flag for no support of UIE mode
Deepak Sikri [Tue, 18 Dec 2012 00:02:34 +0000 (16:02 -0800)]
rtc: rtc-spear: Provide flag for no support of UIE mode

The applications can set the RTC hardware to trigger interrupts in one
of three modes:
    * AIE: Alarm interrupt
    * UIE: Update interrupt (ie: once per second)
    * PIE: Periodic interrupt (sub-second irqs)

The above defined 3 modes are to be supported in the RTC HW in form of
interrupts. The SPEAr RTC hardware does not support the later two modes.

There have been refinements in the RTC core in mainline related to
use of timer queue infrastructure to manage events in RTC. Please refer
the below mentioned patch for details:
* RTC: Rework RTC code to use timerqueue for events
* SHA ID: 6610e0893b8bc6f59b14fed7f089c5997f035f88

There have been provisions added to support hardware that do not have
support the UIE mode. Please refer the following patch.
* rtc: Provide flag for rtc devices that don't support UIE
* SHA ID: 4a649903f91232d02284d53724b0a45728111767

The patch makes use of the provision defined in the above patch to
update the hardware status of UIE mode.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: rtc-spear: Add clk_{un}prepare() support
Deepak Sikri [Tue, 18 Dec 2012 00:02:32 +0000 (16:02 -0800)]
rtc: rtc-spear: Add clk_{un}prepare() support

clk_{un}prepare is mandatory for platforms using common clock framework.
Because for SPEAr we don't do anything in clk_{un}prepare() calls, just
call them once in probe/remove.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: rtc-spear: use devm_*() routines
Viresh Kumar [Tue, 18 Dec 2012 00:02:29 +0000 (16:02 -0800)]
rtc: rtc-spear: use devm_*() routines

Free the rtc-spear driver from tension of freeing resources :) devm_*
derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Deepak Sikri <deepak.sikri@st.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-test.c: avoid calling platform_device_put() twice
Wei Yongjun [Tue, 18 Dec 2012 00:02:27 +0000 (16:02 -0800)]
drivers/rtc/rtc-test.c: avoid calling platform_device_put() twice

In case of error, test_init() needs to call platform_device_del() instead
of platform_device_unregister().  Otherwise, we may call
platform_device_put() twice.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

[akpm@linux-foundation.org: improve label naming]
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-vt8500.c: convert to use devm_kzalloc
Devendra Naga [Tue, 18 Dec 2012 00:02:26 +0000 (16:02 -0800)]
drivers/rtc/rtc-vt8500.c: convert to use devm_kzalloc

Replace the kzalloc() and kfree() calls with devm_kzalloc().

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexey Charkov <alchark@gmail.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-imxdi.c: add devicetree support
Roland Stigge [Tue, 18 Dec 2012 00:02:23 +0000 (16:02 -0800)]
drivers/rtc/rtc-imxdi.c: add devicetree support

Add device tree support to the rtc-imxdi driver.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-imxdi: support for i.MX53
Roland Stigge [Tue, 18 Dec 2012 00:02:22 +0000 (16:02 -0800)]
drivers/rtc/rtc-imxdi: support for i.MX53

Enable support for i.MX53 in addition to i.MX25 by enabling the driver on
ARCH_MXC generally.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: omap: add runtime pm support
Vaibhav Hiremath [Tue, 18 Dec 2012 00:02:18 +0000 (16:02 -0800)]
rtc: omap: add runtime pm support

OMAP1 RTC driver is used in multiple devices like, OMAPL138 and AM33XX.
Driver currently doesn't handle any clocks, which may be right for OMAP1
architecture but in case of AM33XX, the clock/module needs to be enabled
in order to access the registers.

So convert this driver to runtime pm, which internally handles rest.

[afzal@ti.com: handle error path]
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: omap: depend on am33xx
Afzal Mohammed [Tue, 18 Dec 2012 00:02:17 +0000 (16:02 -0800)]
rtc: omap: depend on am33xx

rtc-omap driver can be reused for AM33xx RTC.  Provide dependency in
Kconfig.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: omap: dt support
Afzal Mohammed [Tue, 18 Dec 2012 00:02:15 +0000 (16:02 -0800)]
rtc: omap: dt support

Enhance rtc-omap driver with DT capability

Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoARM: davinci: remove rtc kicker release
Afzal Mohammed [Tue, 18 Dec 2012 00:02:13 +0000 (16:02 -0800)]
ARM: davinci: remove rtc kicker release

rtc-omap driver is now capable of handling kicker mechanism, hence remove
kicker handling at platform level, instead provide proper device name so
that driver can handle kicker mechanism by itself

Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: omap: kicker mechanism support
Afzal Mohammed [Tue, 18 Dec 2012 00:02:11 +0000 (16:02 -0800)]
rtc: omap: kicker mechanism support

OMAP RTC IP can have kicker feature.  This prevents spurious writes to
register.  To write to registers kicker lock has to be released.
Procedure to do it as follows,

1. write to kick0 register, 0x83e70b13
2. write to kick1 register, 0x95a4f1e0

Writing value other than 0x83e70b13 to kick0 enables write locking, more
details about kicker mechanism can be found in section 20.3.3.5.3 of
AM335X TRM @www.ti.com/am335x

Here id table information is added and is used to distinguish those that
require kicker handling and the ones that doesn't need it.  There are more
features in the newer IP's compared to legacy ones other than kicker,
which driver currently doesn't handle, supporting additional features
would be easier with the addition of id table.

Older IP (of OMAP1) doesn't have revision register as per TRM, so revision
register can't be relied always to find features, hence id table is being
used.

While at it, replace __raw_writeb/__raw_readb with writeb/readb; this
driver is used on ARMv7 (AM335X SoC)

Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobinfmt_elf: fix corner case kfree of uninitialized data
Alan Cox [Tue, 18 Dec 2012 00:02:09 +0000 (16:02 -0800)]
binfmt_elf: fix corner case kfree of uninitialized data

If elf_core_dump() is called and fill_note_info() fails in the kmalloc()
then it returns 0 but has not yet initialised all the needed fields.  As a
result we do a kfree(randomness) after correctly skipping the thread data.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: warn on CamelCase variable names
Joe Perches [Tue, 18 Dec 2012 00:02:07 +0000 (16:02 -0800)]
checkpatch: warn on CamelCase variable names

Store the camelcase variables in a hash and only emit a warning on the
first use of each new variable.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: add support for floating point constants
Joe Perches [Tue, 18 Dec 2012 00:02:05 +0000 (16:02 -0800)]
checkpatch: add support for floating point constants

Even though the kernel doesn't support using floating point constants,
add a regex for them.

Support forms like: 0x123p1, 123e-1, 1.23, 1.5e23f

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: find hex constants as a single IDENT
Joe Perches [Tue, 18 Dec 2012 00:02:02 +0000 (16:02 -0800)]
checkpatch: find hex constants as a single IDENT

Hexadecimal values are current found in 2 parts.  A hex constant like
0x123456abcdef is found as 0 and then x123456abcdef and later coalesced.

Instead, reverse the order of the 2 searches in $Constant to find 0x
first, then 0 so that the entire hex constant is found all at once.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: add --strict test for switch/default missing break
Joe Perches [Tue, 18 Dec 2012 00:02:01 +0000 (16:02 -0800)]
checkpatch: add --strict test for switch/default missing break

switch default case is sometimes written as "default:;".  This can cause
new cases added below the default to be defective.

Suggest adding a break; after empty default cases to avoid fallthrough
defects.

Fixed indentation in the other semicolon test above it.

Suggested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: warn when declaring "struct spinlock foo;"
Joe Perches [Tue, 18 Dec 2012 00:02:00 +0000 (16:02 -0800)]
checkpatch: warn when declaring "struct spinlock foo;"

spinlock_t should always be used.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: Add --strict messages for blank lines around braces
Joe Perches [Tue, 18 Dec 2012 00:01:59 +0000 (16:01 -0800)]
checkpatch: Add --strict messages for blank lines around braces

Blank lines around braces are not unnecessary.  Emit a message on the use
of these blank lines only when using --strict.

int foo(int bar)
{

something or other....

}

is generally written in the kernel as:

int foo(int bar)
{
something or other...
}

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: extend line continuation test
Joe Perches [Tue, 18 Dec 2012 00:01:56 +0000 (16:01 -0800)]
checkpatch: extend line continuation test

Preprocessor directives and asm statements should be allowed to have a
line continuation.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: allow control over line length warning, default remains 80
Joe Perches [Tue, 18 Dec 2012 00:01:54 +0000 (16:01 -0800)]
checkpatch: allow control over line length warning, default remains 80

Some projects might want a longer line length so allow a command line
--max-line-length=n control over the long line warnings.  The default line
length is 80.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Constantine Shulyupin <const@makelinux.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: consolidate if (foo) bar(foo) checks and add debugfs_remove
Andy Whitcroft [Tue, 18 Dec 2012 00:01:52 +0000 (16:01 -0800)]
checkpatch: consolidate if (foo) bar(foo) checks and add debugfs_remove

Consolidate the if (foo) bar(foo) detectors into a single check.  Add
debugfs_remove and family.

Based on a patch by Constantine Shulyupin.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Constantine Shulyupin <const@MakeLinux.com>.
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: remove reference to feature-removal-schedule.txt
Tao Ma [Tue, 18 Dec 2012 00:01:49 +0000 (16:01 -0800)]
checkpatch: remove reference to feature-removal-schedule.txt

In commit 9c0ece069b32 ("Get rid of Documentation/feature-removal.txt"),
Linus removes feature-removal-schedule.txt from Documentation, but there
is still some reference to this file.  So remove them.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: warn about using CONFIG_EXPERIMENTAL
Kees Cook [Tue, 18 Dec 2012 00:01:48 +0000 (16:01 -0800)]
checkpatch: warn about using CONFIG_EXPERIMENTAL

This config item has not carried much meaning for a while now and is
almost always enabled by default.  As agreed during the Linux kernel
summit, it is being removed.  This will discourage future addition of
CONFIG_EXPERIMENTAL while it is being phased out.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocheckpatch: warn on unnecessary line continuations
Joe Perches [Tue, 18 Dec 2012 00:01:47 +0000 (16:01 -0800)]
checkpatch: warn on unnecessary line continuations

When the previous line is not a line continuation and the current line has
a line continuation but is not a #define, emit a warning.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocompat: generic compat_sys_sched_rr_get_interval() implementation
Catalin Marinas [Tue, 18 Dec 2012 00:01:45 +0000 (16:01 -0800)]
compat: generic compat_sys_sched_rr_get_interval() implementation

This function is used by sparc, powerpc tile and arm64 for compat support.
 The patch adds a generic implementation with a wrapper for PowerPC to do
the u32->int sign extension.

The reason for a single patch covering powerpc, tile, sparc and arm64 is
to keep it bisectable, otherwise kernel building may fail with mismatched
function declarations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile]
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agolib/rbtree_test.c: fix uninitialized variable warning
Cong Ding [Tue, 18 Dec 2012 00:01:43 +0000 (16:01 -0800)]
lib/rbtree_test.c: fix uninitialized variable warning

Fix this warning:

  lib/rbtree_test.c: In function `check':
  lib/rbtree_test.c:121: warning: `blacks' may be used uninitialized in this function

Signed-off-by: Cong Ding <dinggnu@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopercpu_rw_semaphore: introduce CONFIG_PERCPU_RWSEM
Oleg Nesterov [Tue, 18 Dec 2012 00:01:39 +0000 (16:01 -0800)]
percpu_rw_semaphore: introduce CONFIG_PERCPU_RWSEM

Currently only block_dev and uprobes use percpu_rw_semaphore,
add the config option selected by BLOCK || UPROBES.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopercpu_rw_semaphore: add lockdep annotations
Oleg Nesterov [Tue, 18 Dec 2012 00:01:38 +0000 (16:01 -0800)]
percpu_rw_semaphore: add lockdep annotations

Add lockdep annotations.  Not only this can help to find the potential
problems, we do not want the false warnings if, say, the task takes two
different percpu_rw_semaphore's for reading.  IOW, at least ->rw_sem
should not use a single class.

This patch exposes this internal lock to lockdep so that it represents the
whole percpu_rw_semaphore.  This way we do not need to add another "fake"
->lockdep_map and lock_class_key.  More importantly, this also makes the
output from lockdep much more understandable if it finds the problem.

In short, with this patch from lockdep pov percpu_down_read() and
percpu_up_read() acquire/release ->rw_sem for reading, this matches the
actual semantics.  This abuses __up_read() but I hope this is fine and in
fact I'd like to have down_read_no_lockdep() as well,
percpu_down_read_recursive_readers() will need it.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopercpu_rw_semaphore: kill ->writer_mutex, add ->write_ctr
Oleg Nesterov [Tue, 18 Dec 2012 00:01:36 +0000 (16:01 -0800)]
percpu_rw_semaphore: kill ->writer_mutex, add ->write_ctr

percpu_rw_semaphore->writer_mutex was only added to simplify the initial
rewrite, the only thing it protects is clear_fast_ctr() which otherwise
could be called by multiple writers.  ->rw_sem is enough to serialize the
writers.

Kill this mutex and add "atomic_t write_ctr" instead.  The writers
increment/decrement this counter, the readers check it is zero instead of
mutex_is_locked().

Move atomic_add(clear_fast_ctr(), slow_read_ctr) under down_write() to
avoid the race with other writers.  This is a bit sub-optimal, only the
first writer needs this and we do not need to exclude the readers at this
stage.  But this is simple, we do not want another internal lock until we
add more features.

And this speeds up the write-contended case.  Before this patch the racing
writers sleep in synchronize_sched_expedited() sequentially, with this
patch multiple synchronize_sched_expedited's can "overlap" with each
other.  Note: we can do more optimizations, this is only the first step.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopercpu_rw_semaphore: reimplement to not block the readers unnecessarily
Oleg Nesterov [Tue, 18 Dec 2012 00:01:32 +0000 (16:01 -0800)]
percpu_rw_semaphore: reimplement to not block the readers unnecessarily

Currently the writer does msleep() plus synchronize_sched() 3 times to
acquire/release the semaphore, and during this time the readers are
blocked completely.  Even if the "write" section was not actually started
or if it was already finished.

With this patch down_write/up_write does synchronize_sched() twice and
down_read/up_read are still possible during this time, just they use the
slow path.

percpu_down_write() first forces the readers to use rw_semaphore and
increment the "slow" counter to take the lock for reading, then it
takes that rw_semaphore for writing and blocks the readers.

Also.  With this patch the code relies on the documented behaviour of
synchronize_sched(), it doesn't try to pair synchronize_sched() with
barrier.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agosscanf: don't ignore field widths for numeric conversions
Jan Beulich [Tue, 18 Dec 2012 00:01:31 +0000 (16:01 -0800)]
sscanf: don't ignore field widths for numeric conversions

This is another step towards better standard conformance.  Rather than
adding a local buffer to store the specified portion of the string (with
the need to enforce an arbitrary maximum supported width to limit the
buffer size), do a maximum width conversion and then drop as much of it as
is necessary to meet the caller's request.

Also fail on negative field widths.

Uses the deprecated simple_strto*() functions because kstrtoXX() fail on
non-zero terminated strings.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/of/fdt.c: re-use kernel's kbasename()
Andy Shevchenko [Tue, 18 Dec 2012 00:01:28 +0000 (16:01 -0800)]
drivers/of/fdt.c: re-use kernel's kbasename()

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agotrace: use kbasename()
Andy Shevchenko [Tue, 18 Dec 2012 00:01:27 +0000 (16:01 -0800)]
trace: use kbasename()

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoprocfs: use kbasename()
Andy Shevchenko [Tue, 18 Dec 2012 00:01:25 +0000 (16:01 -0800)]
procfs: use kbasename()

[yongjun_wei@trendmicro.com.cn: remove duplicated include]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm: use kbasename()
Andy Shevchenko [Tue, 18 Dec 2012 00:01:23 +0000 (16:01 -0800)]
mm: use kbasename()

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agolib: dynamic_debug: use kbasename()
Andy Shevchenko [Tue, 18 Dec 2012 00:01:21 +0000 (16:01 -0800)]
lib: dynamic_debug: use kbasename()

Remove the custom implementation of the functionality similar to kbasename().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agostring: introduce helper to get base file name from given path
Andy Shevchenko [Tue, 18 Dec 2012 00:01:18 +0000 (16:01 -0800)]
string: introduce helper to get base file name from given path

There are several places in the kernel that use functionality like
basename(3) with the exception: in case of '/foo/bar/' we expect to get an
empty string.  Let's do it common helper for them.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: YAMANE Toshiaki <yamanetoshi@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMAINTAINERS: add LP855x backlight driver entry
Kim, Milo [Tue, 18 Dec 2012 00:01:17 +0000 (16:01 -0800)]
MAINTAINERS: add LP855x backlight driver entry

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: corgi_lcd: Use gpio_set_value_cansleep() to avoid WARN_ON
Marko Katic [Tue, 18 Dec 2012 00:01:14 +0000 (16:01 -0800)]
backlight: corgi_lcd: Use gpio_set_value_cansleep() to avoid WARN_ON

Changing backlight intensity on an Akita (Sharp Zaurus C-1000) triggers
WARN_ON message:

  WARNING: at drivers/gpio/gpiolib.c:1672 __gpio_set_value+0x38/0xa4()
  Modules linked in:
  Backtrace:
    corgi_bl_set_intensity+0x0/0x74
    corgi_bl_update_status+0x0/0x64
    corgi_lcd_probe+0x0/0x258
    spi_drv_probe+0x0/0x24
    driver_probe_device+0x0/0x208
    __driver_attach+0x0/0x94
    bus_for_each_dev+0x0/0x90
    driver_attach+0x0/0x28
    bus_add_driver+0x0/0x22c
    driver_register+0x0/0x134
    spi_register_driver+0x0/0x60
    corgi_lcd_driver_init+0x0/0x1c
    do_one_initcall+0x0/0x174
    kernel_init+0x0/0x2a8

Akita machines have backlight controls hooked to a gpio expander chip,
max7310 using i2c transfers which can sleep.  In this case,
pca953x_gpio_set_value() can be called to control gpio, and
pca953x_setup_gpio() sets can_sleep flag.  Therefore,
gpio_set_value_cansleep() should be used in order to avoid WARN_ON on
akita machines.

Akita is the only exception in this case since other users of corgi_lcd
access backlight gpio controls through a different gpio expander which
does not set the can_sleep flag.

Signed-off-by: Marko Katic <dromede@gmail.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/lms283gf05.c: use GPIOF_INIT flags when using devm_gpio_reque...
Jingoo Han [Tue, 18 Dec 2012 00:01:12 +0000 (16:01 -0800)]
drivers/video/backlight/lms283gf05.c: use GPIOF_INIT flags when using devm_gpio_request_one()

GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below:

   GPIOF_DIR_OUT   (0 << 0)
   GPIOF_DIR_IN    (1 << 0)

So, when !pdata->reset_inverted is 1, the gpio pin can be set as
input, instead of output.

To prevent this problem, GPIOF_INIT flag should be used when using
devm_gpio_request_one().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/lcd.c: return ENXIO when ops functions cannot be called
Jingoo Han [Tue, 18 Dec 2012 00:01:10 +0000 (16:01 -0800)]
drivers/video/backlight/lcd.c: return ENXIO when ops functions cannot be called

Previously, when ops functions cannot be called, lcd_show_contrast() and
lcd_store_contrast() returned 0, instead of ENXIO.

Thus, in this case, a local variable 'rc' for return value should be
initialized as ENXIO, after kstrtoul() is called.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: 88pm860x_bl: remove an unnecessary line continuation
Jingoo Han [Tue, 18 Dec 2012 00:01:09 +0000 (16:01 -0800)]
backlight: 88pm860x_bl: remove an unnecessary line continuation

Remove an unnecessary line continuation in pm860x_backlight_probe().
Also, a checkpatch warning is fixed as below:

  WARNING: Avoid unnecessary line continuations

[akpm@linux-foundation.org: remove newline]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/pandora_bl.c: change TWL4030_MODULE_PWM0 to TWL_MODULE_PWM
Peter Ujfalusi [Tue, 18 Dec 2012 00:01:08 +0000 (16:01 -0800)]
drivers/video/backlight/pandora_bl.c: change TWL4030_MODULE_PWM0 to TWL_MODULE_PWM

TWL_MODULE_PWM is defined as:

  #define TWL_MODULE_PWM TWL4030_MODULE_PWM0

Use the common module ID define here which will facilitate the upcoming
twl-core cleanup.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: add of_find_backlight_by_node()
Thierry Reding [Tue, 18 Dec 2012 00:01:06 +0000 (16:01 -0800)]
backlight: add of_find_backlight_by_node()

This function finds the struct backlight_device for a given device tree
node.  A dummy function is provided so that it safely compiles out if OF
support is disabled.

[akpm@linux-foundation.org: Don't use IS_ENABLED(CONFIG_OF)]
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/lm3639_bl.c: fix up world writable sysfs file
Axel Lin [Tue, 18 Dec 2012 00:00:59 +0000 (16:00 -0800)]
drivers/video/backlight/lm3639_bl.c: fix up world writable sysfs file

We don't need the sysfs file to be world writable or group writable.
This file is write-only, change it to S_IWUSR (0200).

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: "G.Shark Jeong" <gshark.jeong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/max8925_bl.c: drop devm_kfree of devm_kzalloc'd data
Jingoo Han [Tue, 18 Dec 2012 00:00:58 +0000 (16:00 -0800)]
drivers/video/backlight/max8925_bl.c: drop devm_kfree of devm_kzalloc'd data

devm_kfree() allocates memory that is released when a driver detaches.
Thus, there is no reason to explicitly call devm_kfree in probe or remove
functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/88pm860x_bl.c: drop devm_kfree of devm_kzalloc'd data
Jingoo Han [Tue, 18 Dec 2012 00:00:57 +0000 (16:00 -0800)]
drivers/video/backlight/88pm860x_bl.c: drop devm_kfree of devm_kzalloc'd data

devm_kfree() allocates memory that is released when a driver detaches.
Thus, there is no reason to explicitly call devm_kfree() in probe or remove
functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/s6e63m0.c: remove unnecessary cast of void pointer
Jingoo Han [Tue, 18 Dec 2012 00:00:55 +0000 (16:00 -0800)]
drivers/video/backlight/s6e63m0.c: remove unnecessary cast of void pointer

Remove unnecessary cast of void pointer for platform data in probe
function.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/vgg2432a4.c: add missing const
Jingoo Han [Tue, 18 Dec 2012 00:00:54 +0000 (16:00 -0800)]
drivers/video/backlight/vgg2432a4.c: add missing const

Add 'const' to static array that was missing it in its definition.  Also,
'const' is added to ili9320_write_regs(), because it is called by
vgg2432a4 driver.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/tdo24m.c: add missing const
Jingoo Han [Tue, 18 Dec 2012 00:00:52 +0000 (16:00 -0800)]
drivers/video/backlight/tdo24m.c: add missing const

Add 'const' to static array that was missing it in its definition.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/lms283gf05.c: add missing const
Jingoo Han [Tue, 18 Dec 2012 00:00:50 +0000 (16:00 -0800)]
drivers/video/backlight/lms283gf05.c: add missing const

Add 'const' to static array that was missing it in its definition.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/da9052_bl.c: add missing const
Jingoo Han [Tue, 18 Dec 2012 00:00:48 +0000 (16:00 -0800)]
drivers/video/backlight/da9052_bl.c: add missing const

Add 'const' to static array that was missing it in its definition.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Ashish Jangam <ashish.jangam@kpitcummins.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/lp855x_bl.c: remove unnecessary mutex code
Kim, Milo [Tue, 18 Dec 2012 00:00:45 +0000 (16:00 -0800)]
drivers/video/backlight/lp855x_bl.c: remove unnecessary mutex code

The mutex for accessing lp855x registers is used in case of the user-space
interaction.  When the brightness is changed via sysfs, the mutex is
required.  But the backlight class device already provides it.  Thus, the
lp855x mutex is unnecessary.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/video/backlight/lp855x_bl.c: use generic PWM functions
Kim, Milo [Tue, 18 Dec 2012 00:00:43 +0000 (16:00 -0800)]
drivers/video/backlight/lp855x_bl.c: use generic PWM functions

The LP855x family devices support the PWM input for the backlight control.
 Period of the PWM is configurable in the platform side.  Platform
specific functions are unnecessary anymore because generic PWM functions
are used inside the driver.

(PWM input mode)
To set the brightness, new lp855x_pwm_ctrl() is used.
If a PWM device is not allocated, devm_pwm_get() is called.
The PWM consumer name is from the chip name such as 'lp8550' and 'lp8556'.
To get the brightness value, no additional handling is required.
Just the value of 'props.brightness' is returned.

If the PWM driver is not ready while initializing the LP855x driver, it's
OK.  The PWM device can be retrieved later, when the brightness value is
changed.

Documentation is updated with an example.

[akpm@linux-foundation.org: coding-style simplification, per Thierry]
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: tosa: use devm_gpio_request_one
Jingoo Han [Tue, 18 Dec 2012 00:00:41 +0000 (16:00 -0800)]
backlight: tosa: use devm_gpio_request_one

By using devm_gpio_request_one it is possible to set the direction and
initial value in one shot.  Thus, using devm_gpio_request_one can make the
code simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: lms283gf05: use devm_gpio_request_one
Jingoo Han [Tue, 18 Dec 2012 00:00:40 +0000 (16:00 -0800)]
backlight: lms283gf05: use devm_gpio_request_one

By using devm_gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using devm_gpio_request_one
can make the code simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: vgg2432a4: fix checkpatch warning
Jingoo Han [Tue, 18 Dec 2012 00:00:38 +0000 (16:00 -0800)]
backlight: vgg2432a4: fix checkpatch warning

This patch fixes the checkpatch warning as below:

  WARNING: please, no space before tabs

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: tosa: fix checkpatch error and warning
Jingoo Han [Tue, 18 Dec 2012 00:00:36 +0000 (16:00 -0800)]
backlight: tosa: fix checkpatch error and warning

This patch fixes the checkpatch error and warning as below:

  ERROR: spaces required around that '?' (ctx:VxW)
  ERROR: space required after that ',' (ctx:VxV)

Also, unnecessary lines are removed.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: tdo24m: fix checkpatch warning
Jingoo Han [Tue, 18 Dec 2012 00:00:33 +0000 (16:00 -0800)]
backlight: tdo24m: fix checkpatch warning

This patch fixes the checkpatch warning as below:

  WARNING: please, no space before tabs

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: platform_lcd: fix checkpatch error
Jingoo Han [Tue, 18 Dec 2012 00:00:31 +0000 (16:00 -0800)]
backlight: platform_lcd: fix checkpatch error

This patch fixes the checkpatch error as below:

  ERROR: spaces prohibited around that ':' (ctx:WxW)

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: pcf50633: fix checkpatch warning
Jingoo Han [Tue, 18 Dec 2012 00:00:30 +0000 (16:00 -0800)]
backlight: pcf50633: fix checkpatch warning

This patch fixes the checkpatch warning as below:

  WARNING: please, no spaces at the start of a line

Also, long comments are fixed for the preferred style.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: omap1: fix checkpatch warning
Jingoo Han [Tue, 18 Dec 2012 00:00:29 +0000 (16:00 -0800)]
backlight: omap1: fix checkpatch warning

This patch fixes the checkpatch warning as below:

  ERROR: inline keyword should sit between storage class and type

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: lm3630: fix checkpatch warning
Jingoo Han [Tue, 18 Dec 2012 00:00:26 +0000 (16:00 -0800)]
backlight: lm3630: fix checkpatch warning

This patch fixes the checkpatch warning as below:

  WARNING: static const char * array should probably be static const char * const

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: l4f00242t03: fix checkpatch warning
Jingoo Han [Tue, 18 Dec 2012 00:00:23 +0000 (16:00 -0800)]
backlight: l4f00242t03: fix checkpatch warning

This patch fixes the checkpatch warning as below:

  WARNING: please, no space before tabs

Also, unnecessary line is removed.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: jornada720: fix checkpatch error and warning
Jingoo Han [Tue, 18 Dec 2012 00:00:21 +0000 (16:00 -0800)]
backlight: jornada720: fix checkpatch error and warning

This patch fixes the checkpatch error and warning as below:

  ERROR: return is not a function, parentheses are not required

Also, long comments are fixed for the preferred style.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: ili9320: fix checkpatch error and warning
Jingoo Han [Tue, 18 Dec 2012 00:00:19 +0000 (16:00 -0800)]
backlight: ili9320: fix checkpatch error and warning

This patch fixes the checkpatch error and warning as below:

  WARNING: please, no space before tabs
  WARNING: please, no spaces at the start of a line
  WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
  WARNING: braces {} are not necessary for single statement blocks
  ERROR: code indent should use tabs where possible

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: hp680_bl: fix checkpatch error and warning
Jingoo Han [Tue, 18 Dec 2012 00:00:18 +0000 (16:00 -0800)]
backlight: hp680_bl: fix checkpatch error and warning

This patch fixes the checkpatch error and warning as below:

  WARNING: please, no space before tabs
  WARNING: please, no spaces at the start of a line
  ERROR: do not initialise statics to 0 or NULL
  ERROR: code indent should use tabs where possible

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: generic_bl: fix checkpatch warning
Jingoo Han [Tue, 18 Dec 2012 00:00:17 +0000 (16:00 -0800)]
backlight: generic_bl: fix checkpatch warning

This patch fixes the checkpatch warning as below:

  WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: da903x_bl: fix checkpatch warning
Jingoo Han [Tue, 18 Dec 2012 00:00:15 +0000 (16:00 -0800)]
backlight: da903x_bl: fix checkpatch warning

This patch fixes the checkpatch warning as below:

  WARNING: please, no space before tabs
  WARNING: quoted string split across lines

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: corgi_lcd: fix checkpatch error and warning
Jingoo Han [Tue, 18 Dec 2012 00:00:14 +0000 (16:00 -0800)]
backlight: corgi_lcd: fix checkpatch error and warning

This patch fixes the checkpatch error and warning as below:

  WARNING: please, no space before tabs
  WARNING: quoted string split across lines
  ERROR: space required before the open parenthesis '('

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: atmel-pwm-bl: fix checkpatch warning
Jingoo Han [Tue, 18 Dec 2012 00:00:12 +0000 (16:00 -0800)]
backlight: atmel-pwm-bl: fix checkpatch warning

This patch fixes the checkpatch warning as below:

  WARNING: quoted string split across lines

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: 88pm860x_bl: fix checkpatch warning
Jingoo Han [Tue, 18 Dec 2012 00:00:11 +0000 (16:00 -0800)]
backlight: 88pm860x_bl: fix checkpatch warning

This patch fixes the checkpatch warning as below:

  WARNING: quoted string split across lines

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agobacklight: da903x_bl: use dev_get_drvdata() instead of platform_get_drvdata()
Jingoo Han [Tue, 18 Dec 2012 00:00:10 +0000 (16:00 -0800)]
backlight: da903x_bl: use dev_get_drvdata() instead of platform_get_drvdata()

dev_get_drvdata() can be used instead of platform_get_drvdata()
to make the code smaller.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMAINTAINERS: adjust for UAPI: firewire
Stefan Richter [Tue, 18 Dec 2012 00:00:07 +0000 (16:00 -0800)]
MAINTAINERS: adjust for UAPI: firewire

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoCorentin has moved
Corentin Chary [Tue, 18 Dec 2012 00:00:05 +0000 (16:00 -0800)]
Corentin has moved

Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMAINTAINERS: remove include/linux/ext3*
Cesar Eduardo Barros [Tue, 18 Dec 2012 00:00:03 +0000 (16:00 -0800)]
MAINTAINERS: remove include/linux/ext3*

Moved to fs/ext3/ext3.h by commit 4613ad180d19 ("ext3: move headers to
fs/ext3/").

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMAINTAINERS: CHINESE MAINTAINERS mailing list is subscribers only
Joe Perches [Tue, 18 Dec 2012 00:00:00 +0000 (16:00 -0800)]
MAINTAINERS: CHINESE MAINTAINERS mailing list is subscribers only

Mark it so.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Harry Wei <harryxiyou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agolib/vsprintf.c: fix handling of %zd when using ssize_t
Jason Gunthorpe [Mon, 17 Dec 2012 23:59:58 +0000 (15:59 -0800)]
lib/vsprintf.c: fix handling of %zd when using ssize_t

Documentation/printk-formats.txt says to use %zd for a ssize_t argument
and some drivers do.  Unfortunately this prints a positive number for
negative values eg:

  tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error 4294967234

Add a case to va_args a ssize_t type if the interpretation should be
signed.

Tested on PPC32.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoprintk: boot_delay should only affect output
Andrew Cooks [Mon, 17 Dec 2012 23:59:56 +0000 (15:59 -0800)]
printk: boot_delay should only affect output

The boot_delay parameter affects all printk(), even if the log level
prevents visible output from the call.  It results in delays greater than
the user intended without purpose.

This patch changes the behaviour of boot_delay to only delay output.

Signed-off-by: Andrew Cooks <acooks@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodmatest: check for dma mapping error
Andy Shevchenko [Mon, 17 Dec 2012 23:59:53 +0000 (15:59 -0800)]
dmatest: check for dma mapping error

The kernel emits a warning if CONFIG_DMA_API_DEBUG=y:

  WARNING: at lib/dma-debug.c:933 check_unmap+0x5d6/0x6ac()
  dw_dmac dw_dmac.0: DMA-API: device driver failed to check map error[device address=0x0000000035698305] [size=14365 bytes] [mapped as single]

Fix this by adding the required checking of the dma_map_single() return
value.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodmatest: implement two helpers to unmap dma memory
Andy Shevchenko [Mon, 17 Dec 2012 23:59:52 +0000 (15:59 -0800)]
dmatest: implement two helpers to unmap dma memory

The unmap_src() and unmap_dst() will be used later as well.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agowatchdog: store the watchdog sample period as a variable
Chuansheng Liu [Mon, 17 Dec 2012 23:59:50 +0000 (15:59 -0800)]
watchdog: store the watchdog sample period as a variable

Currently getting the sample period is always thru a complex
calculation: get_softlockup_thresh() * ((u64)NSEC_PER_SEC / 5).

We can store the sample period as a variable, and set it as __read_mostly
type.

Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agousb: musb: use io{read,write}*_rep accessors
Matthew Leach [Mon, 17 Dec 2012 23:59:48 +0000 (15:59 -0800)]
usb: musb: use io{read,write}*_rep accessors

The {read,write}s{b,w,l} operations are not defined by all architectures
and are being removed from the asm-generic/io.h interface.

This patch replaces the usage of these string functions in the musb
accessors with io{read,write}{8,16,32}_rep calls instead.

Signed-off-by: Matthew Leach <matthew@mattleach.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomusb: tusb6010: use io{read,write}*_rep accessors
Matthew Leach [Mon, 17 Dec 2012 23:59:45 +0000 (15:59 -0800)]
musb: tusb6010: use io{read,write}*_rep accessors

The {read,write}s{b,w,l} operations are not defined by all architectures
and are being removed from the asm-generic/io.h interface.

This patch replaces the usage of these string functions in the tusb6010
accessors with io{read,write}{8,16,32}_rep calls instead.

Signed-off-by: Matthew Leach <matthew@mattleach.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoasm-generic: io: don't perform swab during {in,out} string functions
Will Deacon [Mon, 17 Dec 2012 23:59:42 +0000 (15:59 -0800)]
asm-generic: io: don't perform swab during {in,out} string functions

The {in,out}s{b,w,l} functions are designed to operate on a stream of
bytes and therefore should not perform any byte-swapping, regardless of
the CPU byte order.

This patch fixes the generic IO header so that {in,out}s{b,w,l} call the
__raw_{read,write} functions directly rather than going via the
endian-correcting accessors.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>