- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
gup, hugetlb, pagemap, memremap)
- Various other things (hfs, ocfs2, kmod, misc, seqfile)
* akpm: (34 commits)
ipc/util.c: sysvipc_find_ipc() should increase position index
kernel/gcov/fs.c: gcov_seq_next() should increase position index
fs/seq_file.c: seq_read(): add info message about buggy .next functions
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
change email address for Pali Rohár
selftests: kmod: test disabling module autoloading
selftests: kmod: fix handling test numbers above 9
docs: admin-guide: document the kernel.modprobe sysctl
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
kmod: make request_module() return an error when autoloading is disabled
mm/memremap: set caching mode for PCI P2PDMA memory to WC
mm/memory_hotplug: add pgprot_t to mhp_params
powerpc/mm: thread pgprot_t through create_section_mapping()
x86/mm: introduce __set_memory_prot()
x86/mm: thread pgprot_t through init_memory_mapping()
mm/memory_hotplug: rename mhp_restrictions to mhp_params
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
mm/vma: introduce VM_ACCESS_FLAGS
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
...
Merge tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"A fix and two cleanups.
Fix:
- Christoph Hellwig noticed that some logic I added to
orangefs_file_read_iter introduced a race condition, so he sent a
reversion patch. I had to modify his patch since reverting at this
point broke Orangefs.
Cleanups:
- Christoph Hellwig noticed that we were doing some unnecessary work
in orangefs_flush, so he sent in a patch that removed the un-needed
code.
- Al Viro told me he had trouble building Orangefs. Orangefs should
be easy to build, even for Al :-).
I looked back at the test server build notes in orangefs.txt, just
in case that's where the trouble really is, and found a couple of
typos and made a couple of clarifications"
* tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: clarify build steps for test server in orangefs.txt
orangefs: don't mess with I_DIRTY_TIMES in orangefs_flush
orangefs: get rid of knob code...
Merge tag 'xtensa-20200410' of git://github.com/jcmvbkbc/linux-xtensa
Pull xtensa updates from Max Filippov:
- replace setup_irq() by request_irq()
- cosmetic fixes in xtensa Kconfig and boot/Makefile
* tag 'xtensa-20200410' of git://github.com/jcmvbkbc/linux-xtensa:
arch/xtensa: fix grammar in Kconfig help text
xtensa: remove meaningless export ccflags-y
xtensa: replace setup_irq() by request_irq()
Merge tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- two cleanups
- fix a boot regression introduced in this merge window
- fix wrong use of memory allocation flags
* tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix booting 32-bit pv guest
x86/xen: make xen_pvmmu_arch_setup() static
xen/blkfront: fix memory allocation flags in blkfront_setup_indirect()
xen: Use evtchn_type_t as a type for event channels
fs/seq_file.c: seq_read(): add info message about buggy .next functions
Patch series "seq_file .next functions should increase position index".
In Aug 2018 NeilBrown noticed commit 1f4aace60b0e ("fs/seq_file.c:
simplify seq_file iteration code and interface")
"Some ->next functions do not increment *pos when they return NULL...
Note that such ->next functions are buggy and should be fixed. A simple
demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size
larger than the size of /proc/swaps. This will always show the whole
last line of /proc/swaps"
Described problem is still actual. If you make lseek into middle of
last output line following read will output end of last line and whole
last line once again.
$ dd if=/proc/swaps bs=1 # usual output
Filename Type Size Used Priority
/dev/dm-0 partition 4194812 97536 -2
104+0 records in
104+0 records out
104 bytes copied
$ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice
dd: /proc/swaps: cannot skip to specified offset
v/dm-0 partition 4194812 97536 -2
/dev/dm-0 partition 4194812 97536 -2
3+1 records in
3+1 records out
131 bytes copied
There are lot of other affected files, I've found 30+ including
/proc/net/ip_tables_matches and /proc/sysvipc/*
I've sent patches into maillists of affected subsystems already, this
patch-set fixes the problem in files related to pstore, tracing, gcov,
sysvipc and other subsystems processed via linux-kernel@ mailing list
directly
Eric Biggers [Fri, 10 Apr 2020 21:33:53 +0000 (14:33 -0700)]
selftests: kmod: fix handling test numbers above 9
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
Eric Biggers [Fri, 10 Apr 2020 21:33:50 +0000 (14:33 -0700)]
docs: admin-guide: document the kernel.modprobe sysctl
Document the kernel.modprobe sysctl in the same place that all the other
kernel.* sysctls are documented. Make sure to mention how to use this
sysctl to completely disable module autoloading, and how this sysctl
relates to CONFIG_STATIC_USERMODEHELPER.
Eric Biggers [Fri, 10 Apr 2020 21:33:47 +0000 (14:33 -0700)]
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
After request_module(), nothing is stopping the module from being
unloaded until someone takes a reference to it via try_get_module().
The WARN_ONCE() in get_fs_type() is thus user-reachable, via userspace
running 'rmmod' concurrently.
Since WARN_ONCE() is for kernel bugs only, not for user-reachable
situations, downgrade this warning to pr_warn_once().
Keep it printed once only, since the intent of this warning is to detect
a bug in modprobe at boot time. Printing the warning more than once
wouldn't really provide any useful extra information.
Fixes: 41124db869b7 ("fs: warn in case userspace lied about modprobe return") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jessica Yu <jeyu@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: NeilBrown <neilb@suse.com> Cc: <stable@vger.kernel.org> [4.13+] Link: http://lkml.kernel.org/r/20200312202552.241885-3-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:43 +0000 (14:33 -0700)]
kmod: make request_module() return an error when autoloading is disabled
Patch series "module autoloading fixes and cleanups", v5.
This series fixes a bug where request_module() was reporting success to
kernel code when module autoloading had been completely disabled via
'echo > /proc/sys/kernel/modprobe'.
It also addresses the issues raised on the original thread
(https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u)
bydocumenting the modprobe sysctl, adding a self-test for the empty path
case, and downgrading a user-reachable WARN_ONCE().
This patch (of 4):
It's long been possible to disable kernel module autoloading completely
(while still allowing manual module insertion) by setting
/proc/sys/kernel/modprobe to the empty string.
This can be preferable to setting it to a nonexistent file since it
avoids the overhead of an attempted execve(), avoids potential
deadlocks, and avoids the call to security_kernel_module_request() and
thus on SELinux-based systems eliminates the need to write SELinux rules
to dontaudit module_request.
However, when module autoloading is disabled in this way,
request_module() returns 0. This is broken because callers expect 0 to
mean that the module was successfully loaded.
Apparently this was never noticed because this method of disabling
module autoloading isn't used much, and also most callers don't use the
return value of request_module() since it's always necessary to check
whether the module registered its functionality or not anyway.
But improperly returning 0 can indeed confuse a few callers, for example
get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit:
if (!fs && (request_module("fs-%.*s", len, name) == 0)) {
fs = __get_fs_type(name, len);
WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name);
}
This is easily reproduced with:
echo > /proc/sys/kernel/modprobe
mount -t NONEXISTENT none /
It causes:
request_module fs-NONEXISTENT succeeded, but still no fs?
WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0
[...]
This should actually use pr_warn_once() rather than WARN_ONCE(), since
it's also user-reachable if userspace immediately unloads the module.
Regardless, request_module() should correctly return an error when it
fails. So let's make it return -ENOENT, which matches the error when
the modprobe binary doesn't exist.
I've also sent patches to document and test this case.
mm/memremap: set caching mode for PCI P2PDMA memory to WC
PCI BAR IO memory should never be mapped as WB, however prior to this
the PAT bits were set WB and it was typically overridden by MTRR
registers set by the firmware.
Set PCI P2PDMA memory to be UC as this is what it currently, typically,
ends up being mapped as on x86 after the MTRR registers override the
cache setting.
Future use-cases may need to generalize this by adding flags to select
the caching type, as some P2PDMA cases may not want UC. However, those
use-cases are not upstream yet and this can be changed when they arrive.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric Badger <ebadger@gigaio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200306170846.9333-8-logang@deltatee.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
devm_memremap_pages() is currently used by the PCI P2PDMA code to create
struct page mappings for IO memory. At present, these mappings are
created with PAGE_KERNEL which implies setting the PAT bits to be WB.
However, on x86, an mtrr register will typically override this and force
the cache type to be UC-. In the case firmware doesn't set this
register it is effectively WB and will typically result in a machine
check exception when it's accessed.
Other arches are not currently likely to function correctly seeing they
don't have any MTRR registers to fall back on.
To solve this, provide a way to specify the pgprot value explicitly to
arch_add_memory().
Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a
simple change to pass the pgprot_t down to their respective functions
which set up the page tables. For x86_32, set the page tables
explicitly using _set_memory_prot() (seeing they are already mapped).
For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this
should be fine, for now, seeing these architectures don't support
ZONE_DEVICE.
A check in __add_pages() is also added to ensure the pgprot parameter
was set for all arches.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Badger <ebadger@gigaio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200306170846.9333-7-logang@deltatee.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/memory_hotplug: rename mhp_restrictions to mhp_params
The mhp_restrictions struct really doesn't specify anything resembling a
restriction anymore so rename it to be mhp_params as it is a list of
extended parameters.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Badger <ebadger@gigaio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200306170846.9333-3-logang@deltatee.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
Patch series "Allow setting caching mode in arch_add_memory() for
P2PDMA", v4.
Currently, the page tables created using memremap_pages() are always
created with the PAGE_KERNEL cacheing mode. However, the P2PDMA code is
creating pages for PCI BAR memory which should never be accessed through
the cache and instead use either WC or UC. This still works in most
cases, on x86, because the MTRR registers typically override the caching
settings in the page tables for all of the IO memory to be UC-.
However, this tends not to work so well on other arches or some rare x86
machines that have firmware which does not setup the MTRR registers in
this way.
Instead of this, this series proposes a change to arch_add_memory() to
take the pgprot required by the mapping which allows us to explicitly
set pagetable entries for P2PDMA memory to UC.
This changes is pretty routine for most of the arches: x86_64, arm64 and
powerpc simply need to thread the pgprot through to where the page
tables are setup. x86_32 unfortunately sets up the page tables at boot
so must use _set_memory_prot() to change their caching mode. ia64, s390
and sh don't appear to have an easy way to change the page tables so,
for now at least, we just return -EINVAL on such mappings and thus they
will not support P2PDMA memory until the work for this is done. This
should be fine as they don't yet support ZONE_DEVICE.
This patch (of 7):
This variable is not used anywhere and should therefore be removed from
the structure.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Badger <ebadger@gigaio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/20200306170846.9333-2-logang@deltatee.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL
but required to define quite similar fallback stubs for special page
table entry helpers such as pte_special() and pte_mkspecial(), as they
get build in generic MM without a config check. This creates two
generic fallback stub definitions for these helpers, eliminating much
code duplication.
mips platform has a special case where pte_special() and pte_mkspecial()
visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires.
This restricts those symbol visibility in order to avoid redefinitions
which is now exposed through this new generic stubs and subsequent build
failure. arm platform set_pte_at() definition needs to be moved into a
C file just to prevent a build failure.
[anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas] Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Stafford Horne <shorne@gmail.com> [openrisc] Acked-by: Helge Deller <deller@gmx.de> [parisc] Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Brian Cain <bcain@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Sam Creasey <sammy@sammy.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paulburton@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are many places where all basic VMA access flags (read, write,
exec) are initialized or checked against as a group. One such example
is during page fault. Existing vma_is_accessible() wrapper already
creates the notion of VMA accessibility as a group access permissions.
Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which
will not only reduce code duplication but also extend the VMA
accessibility concept in general.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Springer <rspringer@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS. While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms. Apart from simplification, this
reduces code duplication as well.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Brian Cain <bcain@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paulburton@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjun Roy [Fri, 10 Apr 2020 21:32:58 +0000 (14:32 -0700)]
mm: define pte_index as macro for x86
pte_index() is either defined as a macro (e.g. sparc64) or as an
inlined function (e.g. x86). vm_insert_pages() depends on pte_index
but it is not defined on all platforms (e.g. m68k).
To fix compilation of vm_insert_pages() on architectures not providing
pte_index(), we perform the following fix:
0. For platforms where it is meaningful, and defined as a macro, no
change is needed.
1. For platforms where it is meaningful and defined as an inlined
function, and we want to use it with vm_insert_pages(), we define
a degenerate macro of the form: #define pte_index pte_index
2. vm_insert_pages() checks for the existence of a pte_index macro
definition. If found, it implements a batched insert. If not found,
it devolves to calling vm_insert_page() in a loop.
This patch implements step 1 for x86.
v3 of this patch fixes a compilation warning for an unused method.
v2 of this patch moved a macro definition to a more readable location.
Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Matthew Wilcox <willy@infradead.org> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/20200228054714.204424-1-arjunroy.kdev@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjun Roy [Fri, 10 Apr 2020 21:32:54 +0000 (14:32 -0700)]
mm: bring sparc pte_index() semantics inline with other platforms
pte_index() on platforms other than sparc return a numerical index. On
sparc, it returns a pte_t*. This presents an issue for
vm_insert_pages(), which relies on pte_index() to find the offset for a
pte within a pmd, for batched inserts.
This patch:
1. Modifies pte_index() for sparc to return a numerical index, like
other platforms,
2. Defines pte_entry() for sparc which returns a pte_t*
(as pte_index() used to),
3. Converts existing sparc callers for pte_index() to use pte_entry().
[sfr@canb.auug.org.au: remove pte_entry and just directly modified pte_offset_kernel instead] Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: David Miller <davem@davemloft.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Arjun Roy <arjunroy.kdev@gmail.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Link: http://lkml.kernel.org/r/20200227105045.6b421d9f@canb.auug.org.au Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjun Roy [Fri, 10 Apr 2020 21:32:51 +0000 (14:32 -0700)]
mm/memory.c: refactor insert_page to prepare for batched-lock insert
Add helper methods for vm_insert_page()/insert_page() to prepare for
vm_insert_pages(), which batch-inserts pages to reduce spinlock
operations when inserting multiple consecutive pages into the user page
table.
The intention of this patch-set is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.
Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: David Miller <davem@davemloft.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/20200128025958.43490-1-arjunroy.kdev@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jaewon Kim [Fri, 10 Apr 2020 21:32:48 +0000 (14:32 -0700)]
mm/mmap.c: initialize align_offset explicitly for vm_unmapped_area
On passing requirement to vm_unmapped_area, arch_get_unmapped_area and
arch_get_unmapped_area_topdown did not set align_offset. Internally on
both unmapped_area and unmapped_area_topdown, if info->align_mask is 0,
then info->align_offset was meaningless.
But commit df529cabb7a2 ("mm: mmap: add trace point of
vm_unmapped_area") always prints info->align_offset even though it is
uninitialized.
Fix this uninitialized value issue by setting it to 0 explicitly.
Roman Gushchin [Fri, 10 Apr 2020 21:32:45 +0000 (14:32 -0700)]
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Aslan Bakirov <aslan@fb.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Joonsoo Kim <js1304@gmail.com> Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aslan Bakirov [Fri, 10 Apr 2020 21:32:42 +0000 (14:32 -0700)]
mm: cma: NUMA node interface
I've noticed that there is no interface exposed by CMA which would let
me to declare contigous memory on particular NUMA node.
This patchset adds the ability to try to allocate contiguous memory on a
specific node. It will fallback to other nodes if the specified one
doesn't work.
Implement a new method for declaring contigous memory on particular node
and keep cma_declare_contiguous() as a wrapper.
[akpm@linux-foundation.org: build fix] Signed-off-by: Aslan Bakirov <aslan@fb.com> Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Andreas Schaufler <andreas.schaufler@gmx.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Rik van Riel <riel@surriel.com> Cc: Joonsoo Kim <js1304@gmail.com> Link: http://lkml.kernel.org/r/20200407163840.92263-2-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changwei Ge [Fri, 10 Apr 2020 21:32:38 +0000 (14:32 -0700)]
ocfs2: no need try to truncate file beyond i_size
Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can
exceed the inode size. Ocfs2 now doesn't allow that offset beyond inode
size. This restriction is not necessary and violates fallocate(2)
semantics.
If fallocate(2) offset is beyond inode size, just return success and do
nothing further.
Signed-off-by: Changwei Ge <chge@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Yan [Fri, 10 Apr 2020 21:32:32 +0000 (14:32 -0700)]
mm/page_alloc: make pcpu_drain_mutex and pcpu_drain static
Fix the following sparse warning:
mm/page_alloc.c:106:1: warning: symbol 'pcpu_drain_mutex' was not declared. Should it be static?
mm/page_alloc.c:107:1: warning: symbol '__pcpu_scope_pcpu_drain' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200407023925.46438-1-yanaijie@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jakub Kicinski [Fri, 10 Apr 2020 21:32:19 +0000 (14:32 -0700)]
mm, memcg: do not high throttle allocators based on wraparound
If a cgroup violates its memory.high constraints, we may end up unduly
penalising it. For example, for the following hierarchy:
A: max high, 20 usage
A/B: 9 high, 10 usage
A/C: max high, 10 usage
We would end up doing the following calculation below when calculating
high delay for A/B:
A/B: 10 - 9 = 1...
A: 20 - PAGE_COUNTER_MAX = 21, so set max_overage to 21.
This gets worse with higher disparities in usage in the parent.
I have no idea how this disappeared from the final version of the patch,
but it is certainly Not Good(tm). This wasn't obvious in testing because,
for a simple cgroup hierarchy with only one child, the result is usually
roughly the same. It's only in more complex hierarchies that things go
really awry (although still, the effects are limited to a maximum of 2
seconds in schedule_timeout_killable at a maximum).
[chris@chrisdown.name: changelog] Fixes: e26733e0d0ec ("mm, memcg: throttle allocators based on ancestral memory.high") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [5.4.x] Link: http://lkml.kernel.org/r/20200331152424.GA1019937@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simon Gander [Fri, 10 Apr 2020 21:32:16 +0000 (14:32 -0700)]
hfsplus: fix crash and filesystem corruption when deleting files
When removing files containing extended attributes, the hfsplus driver may
remove the wrong entries from the attributes b-tree, causing major
filesystem damage and in some cases even kernel crashes.
To remove a file, all its extended attributes have to be removed as well.
The driver does this by looking up all keys in the attributes b-tree with
the cnid of the file. Each of these entries then gets deleted using the
key used for searching, which doesn't contain the attribute's name when it
should. Since the key doesn't contain the name, the deletion routine will
not find the correct entry and instead remove the one in front of it. If
parent nodes have to be modified, these become corrupt as well. This
causes invalid links and unsorted entries that not even macOS's fsck_hfs
is able to fix.
To fix this, modify the search key before an entry is deleted from the
attributes b-tree by copying the found entry's key into the search key,
therefore ensuring that the correct entry gets removed from the tree.
Signed-off-by: Simon Gander <simon@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Anton Altaparmakov <anton@tuxera.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
printk: queue wake_up_klogd irq_work only if per-CPU areas are ready
printk_deferred(), similarly to printk_safe/printk_nmi, does not
immediately attempt to print a new message on the consoles, avoiding
calls into non-reentrant kernel paths, e.g. scheduler or timekeeping,
which potentially can deadlock the system.
Those printk() flavors, instead, rely on per-CPU flush irq_work to print
messages from safer contexts. For same reasons (recursive scheduler or
timekeeping calls) printk() uses per-CPU irq_work in order to wake up
user space syslog/kmsg readers.
However, only printk_safe/printk_nmi do make sure that per-CPU areas
have been initialised and that it's safe to modify per-CPU irq_work.
This means that, for instance, should printk_deferred() be invoked "too
early", that is before per-CPU areas are initialised, printk_deferred()
will perform illegal per-CPU access.
Lech Perczak [0] reports that after commit 1b710b1b10ef ("char/random:
silence a lockdep splat with printk()") user-space syslog/kmsg readers
are not able to read new kernel messages.
The reason is printk_deferred() being called too early (as was pointed
out by Petr and John).
Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU
areas are initialized.
Merge tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Bug fixes for main IPMI driver, kcs updates
A couple of bug fixes for the main IPMI driver, one functional and two
annotations.
The kcs driver has some significant updates that have been pending for
a while, but I forgot to include in next until a week ago. But this
code is only used by the people who are sending it to me, really, so
it's not a big deal. I did want it to sit in next for at least a week,
and it did result in a fix"
* tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs: Fix aspeed_kcs_probe_of_v1()
ipmi: Add missing annotation for ipmi_ssif_lock_cond() and ipmi_ssif_unlock_cond()
ipmi: kcs: aspeed: Implement v2 bindings
ipmi: kcs: Finish configuring ASPEED KCS device before enable
dt-bindings: ipmi: aspeed: Introduce a v2 binding for KCS
ipmi: fix hung processes in __get_guid()
drivers: char: ipmi: ipmi_msghandler: Pass lockdep expression to RCU lists
Merge tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"As expected, more fixes did turn up in the latter part of the week.
The drm_local_map build regression fix is here, along with temporary
disabling of the hugepage work due to some amdgpu related crashes.
Otherwise it's just a bunch of i915, and amdgpu fixes.
legacy:
- fix drm_local_map.offset type
ttm:
- temporarily disable hugepages to debug amdgpu problems.
prime:
- fix sg extraction
amdgpu:
- Various Renoir fixes
- Fix gfx clockgating sequence on gfx10
- RAS fixes
- Avoid MST property creation after registration
- Various cursor/viewport fixes
- Fix a confusing log message about optional firmwares
i915:
- Flush all the reloc_gpu batch (Chris)
- Ignore readonly failures when updating relocs (Chris)
- Fill all the unused space in the GGTT (Chris)
- Return the right vswing table (Jose)
- Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)
analogix_dp:
- probe fix
virtio:
- oob fix in object create"
* tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/ttm: Temporarily disable the huge_fault() callback
drm/bridge: analogix_dp: Split bind() into probe() and real bind()
drm/legacy: Fix type for drm_local_map.offset
drm/amdgpu/display: fix warning when compiling without debugfs
drm/amdgpu: unify fw_write_wait for new gfx9 asics
drm/amd/powerplay: error out on forcing clock setting not supported
drm/amdgpu: fix gfx hang during suspend with video playback (v2)
drm/amd/display: Check for null fclk voltage when parsing clock table
drm/amd/display: Acknowledge wm_optimized_required
drm/amd/display: Make cursor source translation adjustment optional
drm/amd/display: Calculate scaling ratios on every medium/full update
drm/amd/display: Program viewport when source pos changes for DCN20 hw seq
drm/amd/display: Fix incorrect cursor pos on scaled primary plane
drm/amd/display: change default pipe_split policy for DCN1
drm/amd/display: Translate cursor position by source rect
drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax
drm/amd/display: Avoid create MST prop after registration
drm/amdgpu/psp: dont warn on missing optional TA's
drm/amdgpu: update RAS related dmesg print
drm/amdgpu: resolve mGPU RAS query instability
...
Merge tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered since the previous update.
ALSA core:
- Regression fix for OSS PCM emulation
ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
Others:
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped from
anyone's hands"
* tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda: Add driver blacklist
ALSA: usb-audio: Add mixer workaround for TRX40 and co
ALSA: hda/realtek - Add quirk for MSI GL63
ALSA: ice1724: Fix invalid access for enumerated ctl items
ALSA: hda: Fix potential access overflow in beep helper
ASoC: cs4270: pull reset GPIO low then high
ALSA: hda/realtek - Add HP new mute led supported for ALC236
ALSA: hda/realtek - Add supported new mute Led for HP
ASoC: rt5645: Add platform-data for Medion E1239T
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
ASoC: stm32: sai: Add missing cleanup
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
ASoC: Intel: atom: Fix uninitialized variable compiler warning
ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked
ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
ASoC: SOF: Turn "firmware boot complete" message into a dbg message
ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
ALSA: pcm: oss: Fix regression by buffer overflow fix (again)
ALSA: pcm: oss: Fix regression by buffer overflow fix
edd: Use scnprintf() for avoiding potential buffer overflow
...
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a batch of changes that didn't make it in the initial pull
request because the lpfc series had to be rebased to redo an incorrect
split.
It's basically driver updates to lpfc, target, bnx2fc and ufs with the
rest being minor updates except the sr_block_release one which fixes a
use after free introduced by the removal of the global mutex in the
first patch set"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (35 commits)
scsi: core: Add DID_ALLOC_FAILURE and DID_MEDIUM_ERROR to hostbyte_table
scsi: ufs: Use ufshcd_config_pwr_mode() when scaling gear
scsi: bnx2fc: fix boolreturn.cocci warnings
scsi: zfcp: use fallthrough;
scsi: aacraid: do not overwrite retval in aac_reset_adapter()
scsi: sr: Fix sr_block_release()
scsi: aic7xxx: Remove more FreeBSD-specific code
scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug
scsi: ufs: set device as active power mode after resetting device
scsi: iscsi: Report unbind session event when the target has been removed
scsi: lpfc: Change default SCSI LUN QD to 64
scsi: libfc: rport state move to PLOGI if all PRLI retry exhausted
scsi: libfc: If PRLI rejected, move rport to PLOGI state
scsi: bnx2fc: Update the driver version to 2.12.13
scsi: bnx2fc: Fix SCSI command completion after cleanup is posted
scsi: bnx2fc: Process the RQE with CQE in interrupt context
scsi: target: use the stack for XCOPY passthrough cmds
scsi: target: increase XCOPY I/O size
scsi: target: avoid per-loop XCOPY buffer allocations
scsi: target: drop xcopy DISK BLOCK LENGTH debug
...
Merge tag 'libata-5.7-2020-04-09' of git://git.kernel.dk/linux-block
Pull libata fixes from Jens Axboe:
"A few followup changes/fixes for libata:
- PMP removal fix (Kai-Heng)
- Add remapped NVMe device attribute to sysfs (Kai-Heng)
- Remove redundant assignment (Colin)
- Add yet another Comet Lake ID (Jian-Hong)"
* tag 'libata-5.7-2020-04-09' of git://git.kernel.dk/linux-block:
ahci: Add Intel Comet Lake PCH RAID PCI ID
ata: ahci: Add sysfs attribute to show remapped NVMe device count
ata: ahci-imx: remove redundant assignment to ret
libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set
Merge tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Here's a set of fixes that should go into this merge window. This
contains:
- NVMe pull request from Christoph with various fixes
- Better discard support for loop (Evan)
- Only call ->commit_rqs() if we have queued IO (Keith)
- blkcg offlining fixes (Tejun)
- fix (and fix the fix) for busy partitions"
* tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block:
block: fix busy device checking in blk_drop_partitions again
block: fix busy device checking in blk_drop_partitions
nvmet-rdma: fix double free of rdma queue
blk-mq: don't commit_rqs() if none were queued
nvme-fc: Revert "add module to ops template to allow module references"
nvme: fix deadlock caused by ANA update wrong locking
nvmet-rdma: fix bonding failover possible NULL deref
loop: Better discard support for block devices
loop: Report EOPNOTSUPP properly
nvmet: fix NULL dereference when removing a referral
nvme: inherit stable pages constraint in the mpath stack device
blkcg: don't offline parent blkcg first
blkcg: rename blkcg->cgwb_refcnt to ->online_pin and always use it
nvme-tcp: fix possible crash in recv error flow
nvme-tcp: don't poll a non-live queue
nvme-tcp: fix possible crash in write_zeroes processing
nvmet-fc: fix typo in comment
nvme-rdma: Replace comma with a semicolon
nvme-fcloop: fix deallocation of working context
nvme: fix compat address handling in several ioctls
Merge tag 'io_uring-5.7-2020-04-09' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Here's a set of fixes that either weren't quite ready for the first,
or came about from some intensive testing on memcached with 350K+
sockets.
Summary:
- Fixes for races or deadlocks around poll handling
- Don't double account fixed files against RLIMIT_NOFILE
- IORING_OP_OPENAT LFS fix
- Poll retry handling (Bijan)
- Missing finish_wait() for SQPOLL (Hillf)
- Cleanup/split of io_kiocb alloc vs ctx references (Pavel)
- Fixed file unregistration and init fixes (Xiaoguang)
- Various little fixes (Xiaoguang, Pavel, Colin)"
* tag 'io_uring-5.7-2020-04-09' of git://git.kernel.dk/linux-block:
io_uring: punt final io_ring_ctx wait-and-free to workqueue
io_uring: fix fs cleanup on cqe overflow
io_uring: don't read user-shared sqe flags twice
io_uring: remove req init from io_get_req()
io_uring: alloc req only after getting sqe
io_uring: simplify io_get_sqring
io_uring: do not always copy iovec in io_req_map_rw()
io_uring: ensure openat sets O_LARGEFILE if needed
io_uring: initialize fixed_file_data lock
io_uring: remove redundant variable pointer nxt and io_wq_assign_next call
io_uring: fix ctx refcounting in io_submit_sqes()
io_uring: process requests completed with -EAGAIN on poll list
io_uring: remove bogus RLIMIT_NOFILE check in file registration
io_uring: use io-wq manager as backup task if task is exiting
io_uring: grab task reference for poll requests
io_uring: retry poll if we got woken with non-matching mask
io_uring: add missing finish_wait() in io_sq_thread()
io_uring: refactor file register/unregister/update handling
Merge tag 'xfs-5.7-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"As promised last week, this batch changes how xfs interacts with
memory reclaim; how the log batches and throttles log items; how hard
writes near ENOSPC will try to squeeze more space out of the
filesystem; and hopefully fix the last of the umount hangs after a
catastrophic failure.
Summary:
- Validate the realtime geometry in the superblock when mounting
- Refactor a bunch of tricky flag handling in the log code
- Flush the CIL more judiciously so that we don't wait until there
are millions of log items consuming a lot of memory.
- Throttle transaction commits to prevent the xfs frontend from
flooding the CIL with too many log items.
- Account metadata buffers correctly for memory reclaim.
- Mark slabs properly for memory reclaim. These should help reclaim
run more effectively when XFS is using a lot of memory.
- Don't write a garbage log record at unmount time if we're trying to
trigger summary counter recalculation at next mount.
- Don't block the AIL on locked dquot/inode buffers; instead trigger
its backoff mechanism to give the lock holder a chance to finish
up.
- Ratelimit writeback flushing when buffered writes encounter ENOSPC.
- Other minor cleanups.
- Make reflink a synchronous operation when the fs is mounted with
wsync or sync, which means that now we force the log to disk to
record the changes"
* tag 'xfs-5.7-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
xfs: reflink should force the log out if mounted with wsync
xfs: factor out a new xfs_log_force_inode helper
xfs: fix inode number overflow in ifree cluster helper
xfs: remove redundant variable assignment in xfs_symlink()
xfs: ratelimit inode flush on buffered write ENOSPC
xfs: return locked status of inode buffer on xfsaild push
xfs: trylock underlying buffer on dquot flush
xfs: remove unnecessary ternary from xfs_create
xfs: don't write a corrupt unmount record to force summary counter recalc
xfs: factor inode lookup from xfs_ifree_cluster
xfs: tail updates only need to occur when LSN changes
xfs: factor common AIL item deletion code
xfs: correctly acount for reclaimable slabs
xfs: Improve metadata buffer reclaim accountability
xfs: don't allow log IO to be throttled
xfs: Throttle commits on delayed background CIL push
xfs: Lower CIL flush limit for large logs
xfs: remove some stale comments from the log code
xfs: refactor unmount record writing
xfs: merge xlog_commit_record with xlog_write_done
...
Merge tag 'acpi-5.7-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These prevent a false-positive static checker warning from triggering
in the ACPI EC driver (Rafael Wysocki), fix white space in an ACPI
document (Vilhelm Prytz) and add static annotation to one variable
(Jason Yan)"
* tag 'acpi-5.7-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI, x86/boot: make acpi_nobgrt static
Documentation: firmware-guide: ACPI: fix table alignment in namespace.rst
ACPI: EC: Fix up fast path check in acpi_ec_add()
Merge tag 'pm-5.7-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"Rework compat ioctl handling in the user space hibernation interface
(Christoph Hellwig) and fix a typo in a function name in the cpuidle
haltpoll driver (Yihao Wu)"
* tag 'pm-5.7-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle-haltpoll: Fix small typo
PM / sleep: handle the compat case in snapshot_set_swap_area()
PM / sleep: move SNAPSHOT_SET_SWAP_AREA handling into a helper
io_uring: punt final io_ring_ctx wait-and-free to workqueue
We can't reliably wait in io_ring_ctx_wait_and_kill(), since the
task_works list isn't ordered (in fact it's LIFO ordered). We could
either fix this with a separate task_works list for io_uring work, or
just punt the wait-and-free to async context. This ensures that
task_work that comes in while we're shutting down is processed
correctly. If we don't go async, we could have work past the fput()
work for the ring that depends on work that won't be executed until
after we're done with the wait-and-free. But as this operation is
blocking, it'll never get a chance to run.
This was reproduced with hundreds of thousands of sockets running
memcached, haven't been able to reproduce this synthetically.
Reported-by: Dan Melnic <dmm@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dave Airlie [Thu, 9 Apr 2020 20:42:21 +0000 (06:42 +1000)]
Merge tag 'drm-intel-next-fixes-2020-04-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Flush all the reloc_gpu batch (Chris)
- Ignore readonly failures when updating relocs (Chris)
- Fill all the unused space in the GGTT (Chris)
- Return the right vswing table (Jose)
- Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)
drm/ttm: Temporarily disable the huge_fault() callback
With amdgpu and CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y, there are
errors like:
BUG: non-zero pgtables_bytes on freeing mm
and:
BUG: Bad rss-counter state
with TTM transparent huge-pages.
Until we've figured out what other TTM drivers do differently compared to
vmwgfx, disable the huge_fault() callback, eliminating transhuge
page-table entries.
Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org> Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200409164925.11912-1-thomas_os@shipmail.org
Merge tag 'modules-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Only a small cleanup this time around: a trivial conversion of
zero-length arrays to flexible arrays"
* tag 'modules-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kernel: module: Replace zero-length array with flexible-array member
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Ensure that the compiler and linker versions are aligned so that ld
doesn't complain about not understanding a .note.gnu.property section
(emitted when pointer authentication is enabled).
- Force -mbranch-protection=none when the feature is not enabled, in
case a compiler may choose a different default value.
- Remove CONFIG_DEBUG_ALIGN_RODATA. It was never in defconfig and
rarely enabled.
- Fix checking 16-bit Thumb-2 instructions checking mask in the
emulation of the SETEND instruction (it could match the bottom half
of a 32-bit Thumb-2 instruction).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
arm64: remove CONFIG_DEBUG_ALIGN_RODATA feature
arm64: Always force a branch protection mode when the compiler has one
arm64: Kconfig: ptrauth: Add binutils version check to fix mismatch
init/kconfig: Add LD_VERSION Kconfig
Merge tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The bulk of this is the series to make CONFIG_COMPAT user-selectable,
it's been around for a long time but was blocked behind the
syscall-in-C series.
Plus there's also a few fixes and other minor things.
Summary:
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and
turn it off by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
Nicholas Piggin, Stephen Boyd, Wen Xiong"
* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Always build the tm-poison test 64-bit
powerpc: Improve ppc_save_regs()
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
powerpc/perf: split callchain.c by bitness
powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
powerpc/64: make buildable without CONFIG_COMPAT
powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
powerpc/perf: consolidate read_user_stack_32
powerpc: move common register copy functions from signal_32.c to signal.c
powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
powerpc/ps3: Remove an unneeded NULL check
powerpc/ps3: Remove duplicate error message
powerpc/powernv: Re-enable imc trace-mode in kernel
powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
powerpc/pseries: Fix MCE handling on pseries
selftests/eeh: Skip ahci adapters
powerpc/64s: Fix doorbell wakeup msgclr optimisation
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
"Only a single commit, to remove all use of the obsolete setup_irq()
calls within the m68knommu architecture code"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: Replace setup_irq() by request_irq()
Merge tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of new features:
- Partial support for the Kendryte K210.
There are still a few outstanding issues that I have patches for,
but I don't actually have a board to test them so they're not
included yet.
- SBI v0.2 support.
- Fixes to support for building with LLVM-based toolchains. The
resulting images are known not to boot yet.
I don't anticipate a part two, but I'll probably have something early
in the RCs to finish up the K210 support"
* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
riscv: create a loader.bin boot image for Kendryte SoC
riscv: Kendryte K210 default config
riscv: Add Kendryte K210 device tree
riscv: Select required drivers for Kendryte SOC
riscv: Add Kendryte K210 SoC support
riscv: Add SOC early init support
riscv: Unaligned load/store handling for M_MODE
RISC-V: Support cpu hotplug
RISC-V: Add supported for ordered booting method using HSM
RISC-V: Add SBI HSM extension definitions
RISC-V: Export SBI error to linux error mapping function
RISC-V: Add cpu_ops and modify default booting method
RISC-V: Move relocate and few other functions out of __init
RISC-V: Implement new SBI v0.2 extensions
RISC-V: Introduce a new config for SBI v0.1
RISC-V: Add SBI v0.2 extension definitions
RISC-V: Add basic support for SBI v0.2
RISC-V: Mark existing SBI as 0.1 SBI.
riscv: Use macro definition instead of magic number
riscv: Add support to dump the kernel page tables
...
syzbot wrote:
> ========================================================
> WARNING: possible irq lock inversion dependency detected
> 5.6.0-syzkaller #0 Not tainted
> --------------------------------------------------------
> swapper/1/0 just changed the state of lock:
> ffffffff898090d8 (tasklist_lock){.+.?}-{2:2}, at: send_sigurg+0x9f/0x320 fs/fcntl.c:840
> but this lock took another, SOFTIRQ-unsafe lock in the past:
> (&pid->wait_pidfd){+.+.}-{2:2}
>
>
> and interrupts could create inverse lock ordering between them.
>
>
> other info that might help us debug this:
> Possible interrupt unsafe locking scenario:
>
> CPU0 CPU1
> ---- ----
> lock(&pid->wait_pidfd);
> local_irq_disable();
> lock(tasklist_lock);
> lock(&pid->wait_pidfd);
> <Interrupt>
> lock(tasklist_lock);
>
> *** DEADLOCK ***
>
> 4 locks held by swapper/1/0:
The problem is that because wait_pidfd.lock is taken under the tasklist
lock. It must always be taken with irqs disabled as tasklist_lock can be
taken from interrupt context and if wait_pidfd.lock was already taken this
would create a lock order inversion.
Oleg suggested just disabling irqs where I have added extra calls to
wait_pidfd.lock. That should be safe and I think the code will eventually
do that. It was rightly pointed out by Christian that sharing the
wait_pidfd.lock was a premature optimization.
It is also true that my pre-merge window testing was insufficient. So
remove the premature optimization and give struct pid a dedicated lock of
it's own for struct pid things. I have verified that lockdep sees all 3
paths where we take the new pid->lock and lockdep does not complain.
It is my current day dream that one day pid->lock can be used to guard the
task lists as well and then the tasklist_lock won't need to be held to
deliver signals. That will require taking pid->lock with irqs disabled.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/lkml/00000000000011d66805a25cd73f@google.com/ Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Reported-by: syzbot+343f75cdeea091340956@syzkaller.appspotmail.com Reported-by: syzbot+832aabf700bc3ec920b9@syzkaller.appspotmail.com Reported-by: syzbot+f675f964019f884dbd0f@syzkaller.appspotmail.com Reported-by: syzbot+a9fb1457d720a55d6dc5@syzkaller.appspotmail.com Fixes: 7bc3e6e55acf ("proc: Use a list of inodes to flush from proc") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pavel Begunkov [Thu, 9 Apr 2020 05:17:59 +0000 (08:17 +0300)]
io_uring: fix fs cleanup on cqe overflow
If completion queue overflow occurs, __io_cqring_fill_event() will
update req->cflags, which is in a union with req->work and happens to
be aliased to req->work.fs. Following io_free_req() ->
io_req_work_drop_env() may get a bunch of different problems (miscount
fs->users, segfault, etc) on cleaning @fs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 2f62f36e62daec ("x86/xen: Make the boot CPU idle task reliable")
introduced a regression for booting 32 bit Xen PV guests: the address
of the initial stack needs to be a virtual one.
Fixes: 2f62f36e62daec ("x86/xen: Make the boot CPU idle task reliable") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20200409070001.16675-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
Marek Szyprowski [Tue, 10 Mar 2020 10:34:27 +0000 (11:34 +0100)]
drm/bridge: analogix_dp: Split bind() into probe() and real bind()
Analogix_dp driver acquires all its resources in the ->bind() callback,
what is a bit against the component driver based approach, where the
driver initialization is split into a probe(), where all resources are
gathered, and a bind(), where all objects are created and a compound
driver is initialized.
Extract all the resource related operations to analogix_dp_probe() and
analogix_dp_remove(), then call them before/after registration of the
device components from the main Exynos DP and Rockchip DP drivers. Also
move the plat_data initialization to the probe() to make it available for
the analogix_dp_probe() function.
This fixes the multiple calls to the bind() of the DRM compound driver
when the DP PHY driver is not yet loaded/probed:
Merge tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The main items are:
- support for asynchronous create and unlink (Jeff Layton).
Creates and unlinks are satisfied locally, without waiting for a
reply from the MDS, provided the client has been granted
appropriate caps (new in v15.y.z ("Octopus") release). This can be
a big help for metadata heavy workloads such as tar and rsync.
Opt-in with the new nowsync mount option.
- multiple blk-mq queues for rbd (Hannes Reinecke and myself).
When the driver was converted to blk-mq, we settled on a single
blk-mq queue because of a global lock in libceph and some other
technical debt. These have since been addressed, so allocate a
queue per CPU to enhance parallelism.
- don't hold onto caps that aren't actually needed (Zheng Yan).
This has been our long-standing behavior, but it causes issues with
some active/standby applications (synchronous I/O, stalls if the
standby goes down, etc).
- .snap directory timestamps consistent with ceph-fuse (Luis
Henriques)"
* tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client: (49 commits)
ceph: fix snapshot directory timestamps
ceph: wait for async creating inode before requesting new max size
ceph: don't skip updating wanted caps when cap is stale
ceph: request new max size only when there is auth cap
ceph: cleanup return error of try_get_cap_refs()
ceph: return ceph_mdsc_do_request() errors from __get_parent()
ceph: check all mds' caps after page writeback
ceph: update i_requested_max_size only when sending cap msg to auth mds
ceph: simplify calling of ceph_get_fmode()
ceph: remove delay check logic from ceph_check_caps()
ceph: consider inode's last read/write when calculating wanted caps
ceph: always renew caps if mds_wanted is insufficient
ceph: update dentry lease for async create
ceph: attempt to do async create when possible
ceph: cache layout in parent dir on first sync create
ceph: add new MDS req field to hold delegated inode number
ceph: decode interval_sets for delegated inos
ceph: make ceph_fill_inode non-static
ceph: perform asynchronous unlink if we have sufficient caps
ceph: don't take refs to want mask unless we have all bits
...
Merge tag 'ovl-update-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Fix failure to copy-up files from certain NFSv4 mounts
- Sort out inconsistencies between st_ino and i_ino (used in /proc/locks)
- Allow consistent (POSIX-y) inode numbering in more cases
- Allow virtiofs to be used as upper layer
- Miscellaneous cleanups and fixes
* tag 'ovl-update-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: document xino expected behavior
ovl: enable xino automatically in more cases
ovl: avoid possible inode number collisions with xino=on
ovl: use a private non-persistent ino pool
ovl: fix WARN_ON nlink drop to zero
ovl: fix a typo in comment
ovl: replace zero-length array with flexible-array member
ovl: ovl_obtain_alias(): don't call d_instantiate_anon() for old
ovl: strict upper fs requirements for remote upper fs
ovl: check if upper fs supports RENAME_WHITEOUT
ovl: allow remote upper
ovl: decide if revalidate needed on a per-dentry basis
ovl: separate detection of remote upper layer from stacked overlay
ovl: restructure dentry revalidation
ovl: ignore failure to copy up unknown xattrs
ovl: document permission model
ovl: simplify i_ino initialization
ovl: factor out helper ovl_get_root()
ovl: fix out of date comment and unreachable code
ovl: fix value of i_ino for lower hardlink corner case
Merge tag 'linux-watchdog-5.7-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add TI K3 RTI watchdog
- add stop_on_reboot parameter to control reboot policy
- wm831x_wdt: Remove GPIO handling
- several small fixes, improvements and clean-ups
* tag 'linux-watchdog-5.7-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Add K3 RTI watchdog support
dt-bindings: watchdog: Add support for TI K3 RTI watchdog
watchdog: ziirave_wdt: change name to be more specific
watchdog: orion: use 0 for unset heartbeat
watchdog: npcm: remove whitespaces
watchdog: reset last_hw_keepalive time at start
watchdog: imx2_wdt: Drop .remove callback
watchdog: Add stop_on_reboot parameter to control reboot policy
watchdog: wm831x_wdt: Remove GPIO handling
watchdog: imx7ulp: Remove unused include of init.h
watchdog: imx_sc_wdt: Remove unused includes
watchdog: qcom: Use irq flags from firmware
watchdog: pm8916_wdt: Add system sleep callbacks
watchdog: qcom-wdt: disable pretimeout on timer platform
Merge tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
cros-usbpd-notify and cros_ec_typec:
- Add a new notification driver that handles and dispatches USB PD
related events to other drivers.
- Add a Type C connector class driver for cros_ec
CrOS EC:
- Introduce a new cros_ec_cmd_xfer_status helper
Sensors/iio:
- A series from Gwendal that adds Cros EC sensor hub FIFO support
Wilco EC:
- Fix a build warning.
- Platform data shouldn't include kernel.h
Misc:
- i2c api conversion complete, with i2c_new_client_device instead of
i2c_new_device in chromeos_laptop.
- Replace zero-length array with flexible-array member in
cros_ec_chardev and wilco_ec
- Update new structure for SPI transfer delays in cros_ec_spi
* tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
platform/chrome: cros_ec_spi: Wait for USECS, not NSECS
iio: cros_ec: Use Hertz as unit for sampling frequency
iio: cros_ec: Report hwfifo_watermark_max
iio: cros_ec: Expose hwfifo_timeout
iio: cros_ec: Remove pm function
iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
iio: expose iio_device_set_clock
iio: cros_ec: Move function description to .c file
platform/chrome: cros_ec_sensorhub: Add median filter
platform/chrome: cros_ec_sensorhub: Add code to spread timestmap
platform/chrome: cros_ec_sensorhub: Add FIFO support
platform/chrome: cros_ec_sensorhub: Add the number of sensors in sensorhub
platform/chrome: chromeos_laptop: make I2C API conversion complete
platform/chrome: wilco_ec: event: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_chardev: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_typec: Update port info from EC
platform/chrome: Add Type C connector class driver
platform/chrome: cros_usbpd_notify: Pull PD_HOST_EVENT status
platform/chrome: cros_usbpd_notify: Amend ACPI driver to plat
platform/chrome: cros_usbpd_notify: Add driver data struct
...
Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
add cross arch compatibility to the devm_memremap_pages() interface,
enhance numa information for persistent memory ranges, and add a
zero_page_range() dax operation.
This cycle I switched from the patchwork api to Konstantin's b4 script
for collecting tags (from x86, PowerPC, filesystem, and device-mapper
folks), and everything looks to have gone ok there. This has all
appeared in -next with no reported issues.
Summary:
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach
in the platform-memory subsystem before the platform will consider
them power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic
facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit
test compilation fixups.
- Fixup some flexible-array declarations"
* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
dax: Move mandatory ->zero_page_range() check in alloc_dax()
dax,iomap: Add helper dax_iomap_zero() to zero a range
dax: Use new dax zero page method for zeroing a page
dm,dax: Add dax zero_page_range operation
s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
dax, pmem: Add a dax operation zero_page_range
pmem: Add functions for reading/writing page to/from pmem
libnvdimm: Update persistence domain value for of_pmem and papr_scm device
tools/test/nvdimm: Fix out of tree build
libnvdimm/region: Fix build error
libnvdimm/region: Replace zero-length array with flexible-array member
libnvdimm/label: Replace zero-length array with flexible-array member
ACPI: NFIT: Replace zero-length array with flexible-array member
libnvdimm/region: Introduce an 'align' attribute
libnvdimm/region: Introduce NDD_LABELING
libnvdimm/namespace: Enforce memremap_compat_align()
libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
libnvdimm: Out of bounds read in __nd_ioctl()
acpi/nfit: improve bounds checking for 'func'
mm/memremap_pages: Introduce memremap_compat_align()
...
Alex Deucher [Wed, 8 Apr 2020 13:30:11 +0000 (09:30 -0400)]
drm/amdgpu/display: fix warning when compiling without debugfs
fixes unused variable warning.
Reported-by: Eric Biggers <ebiggers@kernel.org> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aaron Liu [Tue, 7 Apr 2020 09:46:04 +0000 (17:46 +0800)]
drm/amdgpu: unify fw_write_wait for new gfx9 asics
Make the fw_write_wait default case true since presumably all new
gfx9 asics will have updated firmware. That is using unique WAIT_REG_MEM
packet with opration=1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com> Tested-by: Aaron Liu <aaron.liu@amd.com> Tested-by: Yuxian Dai <Yuxian.Dai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Evan Quan [Fri, 3 Apr 2020 05:19:14 +0000 (13:19 +0800)]
drm/amd/powerplay: error out on forcing clock setting not supported
For Arcturus, forcing clock to some specific level is not supported
with 54.18 and onwards SMU firmware. As according to firmware team,
they adopt new gfx dpm tuned parameters which can cover all the use
case in a much smooth way. Thus setting through driver interface
is not needed and maybe do a disservice.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: fix gfx hang during suspend with video playback (v2)
The system will be hang up during S3 suspend because of SMU is pending
for GC not respose the register CP_HQD_ACTIVE access request.This issue
root cause of accessing the GC register under enter GFX CGGPG and can
be fixed by disable GFX CGPG before perform suspend.
v2: Use disable the GFX CGPG instead of RLC safe mode guard.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Tested-by: Mengbing Wang <Mengbing.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Merge tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM-SMMU support for the TLB range invalidation command in SMMUv3.2
- ARM-SMMU introduction of command batching helpers to batch up CD and
ATC invalidation
- ARM-SMMU support for PCI PASID, along with necessary PCI symbol
exports
- Introduce a generic (actually rename an existing) IOMMU related
pointer in struct device and reduce the IOMMU related pointers
- Some fixes for the OMAP IOMMU driver to make it build on 64bit
architectures
- Various smaller fixes and improvements
* tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
iommu: Move fwspec->iommu_priv to struct dev_iommu
iommu/virtio: Use accessor functions for iommu private data
iommu/qcom: Use accessor functions for iommu private data
iommu/mediatek: Use accessor functions for iommu private data
iommu/renesas: Use accessor functions for iommu private data
iommu/arm-smmu: Use accessor functions for iommu private data
iommu/arm-smmu: Refactor master_cfg/fwspec usage
iommu/arm-smmu-v3: Use accessor functions for iommu private data
iommu: Introduce accessors for iommu private data
iommu/arm-smmu: Fix uninitilized variable warning
iommu: Move iommu_fwspec to struct dev_iommu
iommu: Rename struct iommu_param to dev_iommu
iommu/tegra-gart: Remove direct access of dev->iommu_fwspec
drm/msm/mdp5: Remove direct access of dev->iommu_fwspec
ACPI/IORT: Remove direct access of dev->iommu_fwspec
iommu: Define dev_iommu_fwspec_get() for !CONFIG_IOMMU_API
iommu/virtio: Reject IOMMU page granule larger than PAGE_SIZE
iommu/virtio: Fix freeing of incomplete domains
iommu/virtio: Fix sparse warning
iommu/vt-d: Add build dependency on IOASID
...
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"s390:
- nested virtualization fixes
x86:
- split svm.c
- miscellaneous fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: fix crash cleanup when KVM wasn't used
KVM: X86: Filter out the broadcast dest for IPI fastpath
KVM: s390: vsie: Fix possible race when shadowing region 3 tables
KVM: s390: vsie: Fix delivery of addressing exceptions
KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks
KVM: nVMX: don't clear mtf_pending when nested events are blocked
KVM: VMX: Remove unnecessary exception trampoline in vmx_vmenter
KVM: SVM: Split svm_vcpu_run inline assembly to separate file
KVM: SVM: Move SEV code to separate file
KVM: SVM: Move AVIC code to separate file
KVM: SVM: Move Nested SVM Implementation to nested.c
kVM SVM: Move SVM related files to own sub-directory
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- Some bug fixes
- The new vdpa subsystem with two first drivers
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
vdpa: move to drivers/vdpa
virtio: Intel IFC VF driver for VDPA
vdpasim: vDPA device simulator
vhost: introduce vDPA-based backend
virtio: introduce a vDPA based transport
vDPA: introduce vDPA bus
vringh: IOTLB support
vhost: factor out IOTLB
vhost: allow per device message handler
vhost: refine vhost and vringh kconfig
virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
virtio-net: Introduce hash report feature
virtio-net: Introduce RSS receive steering feature
virtio-net: Introduce extended RSC feature
tools/virtio: option to build an out of tree module
Fredrik Strupe [Wed, 8 Apr 2020 11:29:41 +0000 (13:29 +0200)]
arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
For thumb instructions, call_undef_hook() in traps.c first reads a u16,
and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second
u16 is read, which then makes up the the lower half-word of a T32
instruction. For T16 instructions, the second u16 is not read,
which makes the resulting u32 opcode always have the upper half set to
0.
However, having the upper half of instr_mask in the undef_hook set to 0
masks out the upper half of all thumb instructions - both T16 and T32.
This results in trapped T32 instructions with the lower half-word equal
to the T16 encoding of setend (b650) being matched, even though the upper
half-word is not 0000 and thus indicates a T32 opcode.
An example of such a T32 instruction is eaa0b650, which should raise a
SIGILL since T32 instructions with an eaa prefix are unallocated as per
Arm ARM, but instead works as a SETEND because the second half-word is set
to b650.
This patch fixes the issue by extending instr_mask to include the
upper u32 half, which will still match T16 instructions where the upper
half is 0, but not T32 instructions.
Fixes: 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks") Cc: <stable@vger.kernel.org> # 4.0.x- Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Fredrik Strupe <fredrik@strupe.net> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
mm/gup: Let __get_user_pages_locked() return -EINTR for fatal signal
__get_user_pages_locked() will return 0 instead of -EINTR after commit 4426e945df588 ("mm/gup: allow VM_FAULT_RETRY for multiple times") which
added extra code to allow gup detect fatal signal faster.
Restore the original -EINTR behavior.
Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 4426e945df58 ("mm/gup: allow VM_FAULT_RETRY for multiple times") Reported-by: syzbot+3be1a33f04dc782e9fd5@syzkaller.appspotmail.com Signed-off-by: Hillf Danton <hdanton@sina.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Begunkov [Wed, 8 Apr 2020 05:58:45 +0000 (08:58 +0300)]
io_uring: remove req init from io_get_req()
io_get_req() do two different things: io_kiocb allocation and
initialisation. Move init part out of it and rename into
io_alloc_req(). It's simpler this way and also have better data
locality.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Wed, 8 Apr 2020 05:58:44 +0000 (08:58 +0300)]
io_uring: alloc req only after getting sqe
As io_get_sqe() split into 2 stage get/consume, get an sqe before
allocating io_kiocb, so no free_req*() for a failure case is needed,
and inline back __io_req_do_free(), which has only 1 user.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Wed, 8 Apr 2020 05:58:43 +0000 (08:58 +0300)]
io_uring: simplify io_get_sqring
Make io_get_sqring() care only about sqes themselves, not initialising
the io_kiocb. Also, split it into get + consume, that will be helpful in
the future.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Xiaoguang Wang [Wed, 8 Apr 2020 14:29:58 +0000 (22:29 +0800)]
io_uring: do not always copy iovec in io_req_map_rw()
In io_read_prep() or io_write_prep(), io_req_map_rw() takes
struct io_async_rw's fast_iov as argument to call io_import_iovec(),
and if io_import_iovec() uses struct io_async_rw's fast_iov as
valid iovec array, later indeed io_req_map_rw() does not need
to do the memcpy operation, because they are same pointers.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring: ensure openat sets O_LARGEFILE if needed
OPENAT2 correctly sets O_LARGEFILE if it has to, but that escaped the
OPENAT opcode. Dmitry reports that his test case that compares openat()
and IORING_OP_OPENAT sees failures on large files:
*** sync openat
openat succeeded
sync write at offset 0
write succeeded
sync write at offset 4294967296
write succeeded
*** sync openat
openat succeeded
io_uring write at offset 0
write succeeded
io_uring write at offset 4294967296
write succeeded
*** io_uring openat
openat succeeded
sync write at offset 0
write succeeded
sync write at offset 4294967296
write failed: File too large
*** io_uring openat
openat succeeded
io_uring write at offset 0
write succeeded
io_uring write at offset 4294967296
write failed: File too large
Ensure we set O_LARGEFILE, if force_o_largefile() is true.
Cc: stable@vger.kernel.org # v5.6 Fixes: 15b71abe7b52 ("io_uring: add support for IORING_OP_OPENAT") Reported-by: Dmitry Kadashev <dkadashev@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Regular files opened with O_NONBLOCK allow read to return after a single
round-trip with the server instead of trying to fill buffer.
Add a few lines in 9p documentation to describe that.
projects / mirror_ubuntu-kernels.git / log