qga: return a more explicit error on why a command is disabled
qmp_disable_command() now takes an optional error string to return a
more explicit error message.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1928806 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix up 80+ char line Signed-off-by: Michael Roth <michael.roth@amd.com>
AlexChen [Mon, 26 Oct 2020 09:05:38 +0000 (17:05 +0800)]
qga: Add spaces around operator
Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: AlexChen <alex.chen@huawei.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix 80+ char violation while we're here
*fix w32 build breakage from changing INVALID_SET_FILE_POINTER
definition from a cast to a subtraction Signed-off-by: Michael Roth <michael.roth@amd.com>
Lin Ma [Wed, 24 Feb 2021 05:14:28 +0000 (13:14 +0800)]
qga: Correct loop count in qmp_guest_get_vcpus()
The guest-get-vcpus returns incorrect vcpu info in case we hotunplug vcpus(not
the last one).
e.g.:
A VM has 4 VCPUs: cpu0 + 3 hotunpluggable online vcpus(cpu1, cpu2 and cpu3).
Hotunplug cpu2, Now only cpu0, cpu1 and cpu3 are present & online.
Signed-off-by: Lin Ma <lma@suse.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix build breakage by using PRId64 for sscanf Signed-off-by: Michael Roth <michael.roth@amd.com>
* remotes/kraxel/tags/usb-20210315-pull-request:
usb/storage: clear csw on reset
usb/storage: add kconfig symbols
usb/storage move usb-storage device to separate source file
usb/storage: move usb-bot device to separate source file
usb/storage: move declarations to usb/msd.h header
hw/usb: Extract VT82C686 UHCI PCI function into a new unit
hw/usb/hcd-uhci: Expose generic prototypes to local header
hw/southbridge: Add missing Kconfig dependency VT82C686 on USB_UHCI
usb: Document the missing -usbdevice options
usb: Un-deprecate -usbdevice (except for -usbdevice audio which gets removed)
usb: remove '-usbdevice u2f-key'
usb: remove support for -usbdevice parameters
hw/usb/bus: Remove the "full-path" property
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 16 Mar 2021 10:53:47 +0000 (10:53 +0000)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 15 Mar 2021 08:42:25 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: Do not fill legacy info_str for backends
hmp: Use QAPI NetdevInfo in hmp_info_network
net: Move NetClientState.info_str to dynamic allocations
tests: Add tests for query-netdev command
qapi: net: Add query-netdev command
pvrdma: wean code off pvrdma_ring.h kernel header
lan9118: switch to use qemu_receive_packet() for loopback
cadence_gem: switch to use qemu_receive_packet() for loopback
pcnet: switch to use qemu_receive_packet() for loopback
rtl8139: switch to use qemu_receive_packet() for loopback
tx_pkt: switch to use qemu_receive_packet_iov() for loopback
sungem: switch to use qemu_receive_packet() for loopback
msf2-mac: switch to use qemu_receive_packet() for loopback
dp8393x: switch to use qemu_receive_packet() for loopback packet
e1000: switch to use qemu_receive_packet() for loopback
net: introduce qemu_receive_packet()
e1000: fail early for evil descriptor
net: validate that ids are well formed
net: Fix build error when DEBUG_NET is on
virtio-net: calculating proper msix vectors on init
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/core/machine.c
Gerd Hoffmann [Fri, 12 Mar 2021 09:49:54 +0000 (10:49 +0100)]
usb/storage: clear csw on reset
Stale data in csw (specifically residue) can confuse the state machine
and allows the guest trigger an assert(). So clear csw on reset to
avoid this happening in case the guest resets the device in the middle
of a request.
Thomas Huth [Wed, 10 Mar 2021 17:33:23 +0000 (18:33 +0100)]
usb: Document the missing -usbdevice options
There are some more -usbdevice options that have never been mentioned
in the documentation. Now that we removed -usbdevice from the list
of deprecated features again, we should document them properly.
While we're at it, also sort them alphabetically.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210310173323.1422754-5-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Thomas Huth [Wed, 10 Mar 2021 17:33:22 +0000 (18:33 +0100)]
usb: Un-deprecate -usbdevice (except for -usbdevice audio which gets removed)
When trying to remove the -usbdevice option, there were complaints that
"-usbdevice braille" is still a very useful shortcut for some people.
Thus we never remove this option. Since it's not such a big burden to
keep it around, and it's also convenient in the sense that you don't
have to worry to enable a host controller explicitly with this option,
we should remove it from he deprecation list again.
However, there is one exception: "-usbdevice audio" should go away, since
audio devices without "audiodev=..." parameter are also on the deprecation
list and you cannot use "-usbdevice audio" with "audiodev".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210310173323.1422754-4-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Paolo Bonzini [Wed, 10 Mar 2021 17:33:20 +0000 (18:33 +0100)]
usb: remove support for -usbdevice parameters
No device needs them anymore and in fact they're undocumented.
Remove the code. The only change in behavior is that "-usbdevice
braille:hello" now reports an error, which is a bugfix.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210310173323.1422754-2-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Akihiko Odaki [Thu, 25 Feb 2021 00:12:39 +0000 (09:12 +0900)]
virtio-blk: Respect discard granularity
Report the configured granularity for discard operation to the
guest. If this is not set use the block size.
Since until now we have ignored the configured discard granularity
and always reported the block size, let's add
'report-discard-granularity' property and disable it for older
machine types to avoid migration issues.
Alexey Kirillov [Wed, 3 Mar 2021 09:59:10 +0000 (12:59 +0300)]
net: Do not fill legacy info_str for backends
As we use QAPI NetClientState->stored_config to store and get information
about backend network devices, we can drop fill of legacy field info_str
for them.
We still use info_str field for NIC and hubports, so we can not completely
remove it.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
Alexey Kirillov [Wed, 3 Mar 2021 09:59:09 +0000 (12:59 +0300)]
hmp: Use QAPI NetdevInfo in hmp_info_network
Replace usage of legacy field info_str of NetClientState for backend
network devices with QAPI NetdevInfo stored_config that already used
in QMP query-netdev.
This change increases the detail of the "info network" output and takes
a more general approach to composing the output.
NIC and hubports still use legacy info_str field.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
Alexey Kirillov [Wed, 3 Mar 2021 09:59:08 +0000 (12:59 +0300)]
net: Move NetClientState.info_str to dynamic allocations
The info_str field of the NetClientState structure is static and has a size
of 256 bytes. This amount is often unclaimed, and the field itself is used
exclusively for HMP "info network".
The patch translates info_str to dynamic memory allocation.
This action is also allows us to painlessly discard usage of this field
for backend devices.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
Alexey Kirillov [Wed, 3 Mar 2021 09:59:06 +0000 (12:59 +0300)]
qapi: net: Add query-netdev command
The query-netdev command is used to get the configuration of the current
network device backends (netdevs).
This is the QMP analog of the HMP command "info network" but only for
netdevs (i.e. excluding NIC and hubports).
The query-netdev command returns an array of objects of the NetdevInfo
type, which are an extension of Netdev type. It means that response can
be used for netdev-add after small modification. This can be useful for
recreate the same netdev configuration.
Information about the network device is filled in when it is created or
modified and is available through the NetClientState->stored_config.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru> Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Cornelia Huck [Fri, 22 Jan 2021 18:00:29 +0000 (19:00 +0100)]
pvrdma: wean code off pvrdma_ring.h kernel header
The pvrdma code relies on the pvrdma_ring.h kernel header for some
basic ring buffer handling. The content of that header isn't very
exciting, but contains some (q)atomic_*() invocations that (a)
cause manual massaging when doing a headers update, and (b) are
an indication that we probably should not be importing that header
at all.
Let's reimplement the ring buffer handling directly in the pvrdma
code instead. This arguably also improves readability of the code.
Importing the header can now be dropped.
Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
lan9118: switch to use qemu_receive_packet() for loopback
This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.
This is intended to address CVE-2021-3416.
Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com>
cadence_gem: switch to use qemu_receive_packet() for loopback
This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.
This is intended to address CVE-2021-3416.
Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com>
Jason Wang [Wed, 24 Feb 2021 05:27:52 +0000 (13:27 +0800)]
tx_pkt: switch to use qemu_receive_packet_iov() for loopback
This patch switches to use qemu_receive_receive_iov() which can detect
reentrancy and return early.
This is intended to address CVE-2021-3416.
Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Jason Wang [Wed, 24 Feb 2021 05:14:35 +0000 (13:14 +0800)]
sungem: switch to use qemu_receive_packet() for loopback
This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.
This is intended to address CVE-2021-3416.
Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Jason Wang [Wed, 24 Feb 2021 05:00:01 +0000 (13:00 +0800)]
msf2-mac: switch to use qemu_receive_packet() for loopback
This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.
This is intended to address CVE-2021-3416.
Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Jason Wang [Wed, 24 Feb 2021 04:57:40 +0000 (12:57 +0800)]
dp8393x: switch to use qemu_receive_packet() for loopback packet
This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.
This is intended to address CVE-2021-3416.
Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Signed-off-by: Jason Wang <jasowang@redhat.com>
Jason Wang [Wed, 24 Feb 2021 04:13:22 +0000 (12:13 +0800)]
e1000: switch to use qemu_receive_packet() for loopback
This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.
This is intended to address CVE-2021-3416.
Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Jason Wang [Wed, 24 Feb 2021 03:44:36 +0000 (11:44 +0800)]
net: introduce qemu_receive_packet()
Some NIC supports loopback mode and this is done by calling
nc->info->receive() directly which in fact suppresses the effort of
reentrancy check that is done in qemu_net_queue_send().
Unfortunately we can't use qemu_net_queue_send() here since for
loopback there's no sender as peer, so this patch introduce a
qemu_receive_packet() which is used for implementing loopback mode
for a NIC with this check.
NIC that supports loopback mode will be converted to this helper.
This is intended to address CVE-2021-3416.
Cc: Prasad J Pandit <ppandit@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com>
Jason Wang [Wed, 24 Feb 2021 05:45:28 +0000 (13:45 +0800)]
e1000: fail early for evil descriptor
During procss_tx_desc(), driver can try to chain data descriptor with
legacy descriptor, when will lead underflow for the following
calculation in process_tx_desc() for bytes:
Paolo Bonzini [Fri, 12 Mar 2021 14:51:38 +0000 (09:51 -0500)]
net: validate that ids are well formed
When a network or network device is created from the command line or HMP,
QemuOpts ensures that the id passes the id_wellformed check. However,
QMP skips this:
$ qemu-system-x86_64 -qmp stdio -S -nic user,id=123/456
qemu-system-x86_64: -nic user,id=123/456: Parameter id expects an identifier
Identifiers consist of letters, digits, -, ., _, starting with a letter.
Validity checks should be performed always at the bottom of the call chain,
because QMP skips all the steps above. At the same time we know that every
call chain should go through either QMP or (for legacy) through QemuOpts.
Because the id for -net and -nic is automatically generated and not
well-formed by design, just add the check to QMP.
Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Bin Meng [Sun, 28 Feb 2021 05:02:18 +0000 (13:02 +0800)]
net: Fix build error when DEBUG_NET is on
"qemu-common.h" should be included to provide the forward declaration
of qemu_hexdump() when DEBUG_NET is on.
Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Jason Wang [Mon, 8 Mar 2021 04:49:19 +0000 (12:49 +0800)]
virtio-net: calculating proper msix vectors on init
Currently, the default msix vectors for virtio-net-pci is 3 which is
obvious not suitable for multiqueue guest, so we depends on the user
or management tools to pass a correct vectors parameter. In fact, we
can simplifying this by calculating the number of vectors on realize.
Consider we have N queues, the number of vectors needed is 2*N + 2
(#queue pairs + plus one config interrupt and control vq). We didn't
check whether or not host support control vq because it was added
unconditionally by qemu to avoid breaking legacy guests such as Minix.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Lichang Zhao [Fri, 9 Oct 2020 06:44:46 +0000 (14:44 +0800)]
target/avr: Fix some comment spelling errors
I found that there are many spelling errors in the comments of qemu/target/avr.
I used spellcheck to check the spelling errors and found some errors in the folder.
Signed-off-by: Lichang Zhao <zhaolichang@huawei.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Philippe Mathieu-Daude<f4bug@amsat.org>
Message-Id: <20201009064449.2336-12-zhaolichang@huawei.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Message-Id: <20210313165445.2113938-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Message-Id: <20210313165445.2113938-2-f4bug@amsat.org>
- fix elfload
- fix executable page of /proc/self/maps
- add preserve-arg[0] support for binfmt_misc
# gpg: Signature made Sat 13 Mar 2021 09:47:23 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-6.0-pull-request:
linux-user/elfload: fix address calculation in fallback scenario
linux-user/elfload: do not assume MAP_FIXED_NOREPLACE kernel support
linux-user/elfload: munmap proper address in pgd_find_hole_fallback
linux-user: manage binfmt-misc preserve-arg[0] flag
linux-user: Fix executable page of /proc/self/maps
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Sun, 14 Mar 2021 15:13:53 +0000 (15:13 +0000)]
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-12' into staging
* Move unit and bench tests into separate directories
* Clean-up and improve gitlab-ci jobs
* Drop the non-working "check-speed" makefile target
* Minor documentation updates
* remotes/thuth-gitlab/tags/pull-request-2021-03-12:
README: Add Documentation blurb
MAINTAINERS: Merge the Gitlab-CI section into the generic CI section
tests: remove "make check-speed" in favor of "make bench"
gitlab-ci.yml: Merge check-crypto-old jobs into the build-crypto-old jobs
gitlab-ci.yml: Merge one of the coroutine jobs with the tcg-disabled job
gitlab-ci.yml: Add some missing dependencies to the jobs
gitlab-ci.yml: Move build-tools-and-docs-debian to a better place
tests: Move benchmarks into a separate folder
tests: Move unit tests into a separate directory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The instruction manual specifies undefined behaviour for this case. So
we bring this in line with the golden Infineon simlator 'tsim', which
simply writes 0 to the result in case of width=0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
target/tricore: Fix imask OPC2_32_RRPW_IMASK for r3+1 == r2
if r3+1 and r2 are the same then we would overwrite r2 with our first
move and use the wrong result for the shift. Thus we store the result
from the mov in a temp.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Andreas Konopik [Thu, 11 Feb 2021 11:53:29 +0000 (12:53 +0100)]
tricore: fixed faulty conditions for extr and imask
According to the TC 1.3.1. Architecture Manual [1; page 174], results are
undefined, if pos + width > 32 and not 31 or if width = 0.
We found this error because of a different behavior between qemu-tricore
and the real tricore processor. For pos + width = 32, qemu-tricore did not
generate any intermediate code and ran into a different state compared to
the real hardware.
[BK: Add the why to the commit message] Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Andreas Konopik <andreas.konopik@efs-auto.de> Signed-off-by: Georg Hofstetter <georg.hofstetter@efs-auto.de> Signed-off-by: David Brenken <david.brenken@efs-auto.de>
Message-Id: <20210211115329.8984-2-david.brenken@efs-auto.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
target/tricore: Pass MMUAccessType to get_physical_address()
'int access_type' and ACCESS_INT are unused, drop them.
Provide the mmu_idx argument to match other targets.
'int rw' is actually the MMUAccessType, rename it.
Peter Maydell [Sun, 14 Mar 2021 13:18:49 +0000 (13:18 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210314' into staging
target-arm queue:
* versal: Support XRAMs and XRAM controller
* smmu: Various minor bug fixes
* SVE emulation: fix bugs handling odd vector lengths
* allwinner-sun8i-emac: traverse transmit queue using TX_CUR_DESC register value
* tests/acceptance: fix orangepi-pc acceptance tests
* hw/timer/sse-timer: Propagate eventual error in sse_timer_realize()
* hw/arm/virt: KVM: The IPA lower bound is 32
* npcm7xx: support MFT module
* pl110, pxa2xx_lcd: tidy up template headers
# gpg: Signature made Sun 14 Mar 2021 13:17:43 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210314: (39 commits)
hw/display/pxa2xx: Inline template header
hw/display/pxa2xx: Apply whitespace-only coding style fixes to template header
hw/display/pxa2xx: Apply brace-related coding style fixes to template header
hw/display/pxa2xx: Remove use of BITS in pxa2xx_template.h
hw/display/pxa2xx_lcd: Remove dest_width state field
hw/display/pxa2xx_lcd: Remove dead code for non-32-bpp surfaces
hw/display/pl110: Remove use of BITS from pl110_template.h
hw/display/pl110: Pull included-once parts of template header into pl110.c
hw/display/pl110: Remove dead code for non-32-bpp surfaces
tests/qtest: Test PWM fan RPM using MFT in PWM test
hw/arm: Connect PWM fans in NPCM7XX boards
hw/arm: Add MFT device to NPCM7xx Soc
hw/misc: Add NPCM7XX MFT Module
hw/misc: Add GPIOs for duty in NPCM7xx PWM
hw/arm/virt: KVM: The IPA lower bound is 32
accel: kvm: Fix kvm_type invocation
hw/timer/sse-timer: Propagate eventual error in sse_timer_realize()
tests/acceptance: drop ARMBIAN_ARTIFACTS_CACHED condition for orangepi-pc, cubieboard tests
tests/acceptance: update sunxi kernel from armbian to 5.10.16
tests/acceptance/boot_linux_console: change URL for test_arm_orangepi_bionic_20_08
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 11 Feb 2021 14:15:14 +0000 (14:15 +0000)]
hw/display/pxa2xx: Apply whitespace-only coding style fixes to template header
We're about to move code from the template header into pxa2xx_lcd.c.
Before doing that, make coding style fixes so checkpatch doesn't
complain about the patch which moves the code. This commit is
whitespace changes only:
* avoid hard-coded tabs
* fix ident on function prototypes
* no newline before open brace on array definitions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210211141515.8755-9-peter.maydell@linaro.org
Peter Maydell [Thu, 11 Feb 2021 14:15:13 +0000 (14:15 +0000)]
hw/display/pxa2xx: Apply brace-related coding style fixes to template header
We're about to move code from the template header into pxa2xx_lcd.c.
Before doing that, make coding style fixes so checkpatch doesn't
complain about the patch which moves the code. This commit fixes
missing braces in the SKIP_PIXEL() macro definition and in if()
statements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210211141515.8755-8-peter.maydell@linaro.org
Peter Maydell [Thu, 11 Feb 2021 14:15:10 +0000 (14:15 +0000)]
hw/display/pxa2xx_lcd: Remove dead code for non-32-bpp surfaces
For a long time now the UI layer has guaranteed that the console
surface is always 32 bits per pixel. Remove the legacy dead code
from the pxa2xx_lcd display device which was handling the possibility
that the console surface was some other format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210211141515.8755-5-peter.maydell@linaro.org
Peter Maydell [Thu, 11 Feb 2021 14:15:09 +0000 (14:15 +0000)]
hw/display/pl110: Remove use of BITS from pl110_template.h
BITS is always 32, so remove all uses of it from the template header,
by dropping the trailing '32' from the draw function names and
not constructing the name of rgb_to_pixel32() via the glue() macro.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210211141515.8755-4-peter.maydell@linaro.org
Peter Maydell [Thu, 11 Feb 2021 14:15:08 +0000 (14:15 +0000)]
hw/display/pl110: Pull included-once parts of template header into pl110.c
The pl110_template.h header has a doubly-nested multiple-include pattern:
* pl110.c includes it once for each host bit depth (now always 32)
* every time it is included, it includes itself 6 times, to account
for multiple guest device pixel and byte orders
Now we only have to deal with 32-bit host bit depths, we can move the
code corresponding to the outer layer of this double-nesting to be
directly in pl110.c and reduce the template header to a single layer
of nesting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210211141515.8755-3-peter.maydell@linaro.org
Peter Maydell [Thu, 11 Feb 2021 14:15:07 +0000 (14:15 +0000)]
hw/display/pl110: Remove dead code for non-32-bpp surfaces
For a long time now the UI layer has guaranteed that the console
surface is always 32 bits per pixel. Remove the legacy dead
code from the pl110 display device which was handling the
possibility that the console surface was some other format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210211141515.8755-2-peter.maydell@linaro.org
This comment describing the tx79 opcodes is helpful. As we
will implement these instructions in tx79_translate.c, move
the comment there.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-15-f4bug@amsat.org>
target/mips: Remove 'C790 Multimedia Instructions' dead code
We have almost 400 lines of code full of /* TODO */ comments
which end calling gen_reserved_instruction().
As we are not going to implement them, and all the caller's
switch() default cases already call gen_reserved_instruction(),
we can remove this altogether.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-14-f4bug@amsat.org>
target/mips/tx79: Move PCPYLD / PCPYUD opcodes to decodetree
Move PCPYLD (Parallel Copy Lower Doubleword) and PCPYUD
(Parallel Copy Upper Doubleword) to decodetree. Remove
unnecessary code / comments.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-13-f4bug@amsat.org>
Move the existing PCPYH opcode (Parallel Copy Halfword) to decodetree.
Remove unnecessary code / comments.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-12-f4bug@amsat.org>
target/mips/translate: Simplify PCPYH using deposit_i64()
Simplify the PCPYH (Parallel Copy Halfword) instruction by using
multiple calls to deposit_i64() which can be optimized by some
TCG backends.
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-11-f4bug@amsat.org>
We will use gen_rdhwr() outside of translate.c, make it public.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-28-f4bug@amsat.org>
target/mips/tx79: Move MTHI1 / MTLO1 opcodes to decodetree
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-10-f4bug@amsat.org>
target/mips/tx79: Move MFHI1 / MFLO1 opcodes to decodetree
Introduce decodetree structure to decode the tx79 opcodes.
Start it by moving the existing MFHI1 and MFLO1 opcodes.
Remove unnecessary comments.
As the TX79 share opcodes with the TX19/TX39/TX49 CPUs,
we introduce the decode_ext_txx9() dispatcher where we
will add the other decoders later.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-9-f4bug@amsat.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210308131604.460693-1-f4bug@amsat.org>
target/mips: Extract MXU code to new mxu_translate.c file
Extract 1600+ lines from the big translate.c into a new file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-14-f4bug@amsat.org>
Extract the MXU register initialization code from mips_tcg_init()
as a new mxu_translate_init() helper. Make it public and replace
!TARGET_MIPS64 ifdef'ry by the 'TARGET_LONG_BITS == 32' check to
elide this code at preprocessing time.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-13-f4bug@amsat.org>
By making the prototype public and checking
'TARGET_LONG_BITS == 32' we let the compiler
elide the decode_opc_mxu() call.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-12-f4bug@amsat.org>
target/mips: Convert decode_ase_mxu() to decodetree prototype
To easily convert MXU code to decodetree, making it return a boolean.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-11-f4bug@amsat.org>
target/mips: Rename decode_opc_mxu() as decode_ase_mxu()
Use "decode_{isa,ase,ext}_$name()" function name pattern for
public decodetree entrypoints.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-10-f4bug@amsat.org>
target/mips: Move MUL opcode check from decode_mxu() to decode_legacy()
Move the check for MUL opcode from decode_opc_mxu() callee
to decode_opc_legacy() caller, so we can simplify the ifdef'ry
and elide the call in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-9-f4bug@amsat.org>
We already have a macro and definition to extract / check
the Special2 MUL opcode. Use it instead of the unnecessary
OPC__MXU_MUL macro.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-8-f4bug@amsat.org>
target/mips: Pass instruction opcode to decode_opc_mxu()
In the next commit we'll make decode_opc_mxu() match decodetree
prototype by returning a boolean. First pass ctx->opcode as an
argument.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-7-f4bug@amsat.org>
target/mips: Remove unused CPUMIPSState* from MXU functions
None of these MXU functions use their CPUMIPSState* env argument,
remove it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-6-f4bug@amsat.org>
target/mips: Remove XBurst Media eXtension Unit dead code
All these unimplemented MXU opcodes end up calling
gen_reserved_instruction() which is the default switch
case in decode_opc_mxu().
The translate.c file is already big enough and hard to maintain,
remove 1300 lines of unnecessary code and /* TODO */ comments.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-5-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-4-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-3-f4bug@amsat.org>
Introduce the 'mips_tcg' source set to collect TCG specific files.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-2-f4bug@amsat.org>
hw/mips/gt64xxx: Rename trace events related to interrupt registers
We want to trace all register accesses. First rename the current
gt64120_read / gt64120_write events with '_intreg' suffix, as they
are restricted to interrupt registers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20210309142630.728014-5-f4bug@amsat.org>
hw/mips/gt64xxx: Initialize ISD I/O memory region in DeviceRealize()
The ISD I/O region belongs to the TYPE_GT64120_PCI_HOST_BRIDGE,
so initialize it before it is realized, not after.
Rename the region as 'gt64120-isd' so it is clearer to realize
it belongs to the GT64120 in the memory tree view.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20210309142630.728014-2-f4bug@amsat.org>
Vincent Fazio [Sun, 31 Jan 2021 06:19:48 +0000 (00:19 -0600)]
linux-user/elfload: fix address calculation in fallback scenario
Previously, guest_loaddr was not taken into account when returning an
address from pgb_find_hole when /proc/self/maps was unavailable which
caused an improper guest_base address to be calculated.
This could cause a SIGSEGV later in load_elf_image -> target_mmap for
ET_EXEC type images since the mmap MAP_FIXED flag is specified which
could clobber existing mappings at the address returnd by g2h().
Now, pgd_find_hole accounts for guest_loaddr in this scenario.
Fixes: ad592e37dfcc ("linux-user: provide fallback pgd_find_hole for bare chroots") Signed-off-by: Vincent Fazio <vfazio@gmail.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210131061948.15990-1-vfazio@xes-inc.com>
[lv: updated it to check if ret == -1] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Vincent Fazio [Sun, 31 Jan 2021 06:19:30 +0000 (00:19 -0600)]
linux-user/elfload: do not assume MAP_FIXED_NOREPLACE kernel support
Previously, pgd_find_hole_fallback assumed that if the build host's libc
had MAP_FIXED_NOREPLACE defined that the address returned by mmap would
match the requested address. This is not a safe assumption for Linux
kernels prior to 4.17
Now, we always compare mmap's resultant address with the requested
address and no longer short-circuit based on MAP_FIXED_NOREPLACE.
Fixes: 2667e069e7b5 ("linux-user: don't use MAP_FIXED in pgd_find_hole_fallback") Signed-off-by: Vincent Fazio <vfazio@gmail.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210131061930.14554-1-vfazio@xes-inc.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Vincent Fazio [Sun, 31 Jan 2021 06:18:49 +0000 (00:18 -0600)]
linux-user/elfload: munmap proper address in pgd_find_hole_fallback
Previously, if the build host's libc did not define MAP_FIXED_NOREPLACE
or if the running kernel didn't support that flag, it was possible for
pgd_find_hole_fallback to munmap an incorrect address which could lead to
SIGSEGV if the range happened to overlap with the mapped address of the
QEMU binary.
Laurent Vivier [Mon, 22 Feb 2021 10:50:04 +0000 (11:50 +0100)]
linux-user: manage binfmt-misc preserve-arg[0] flag
Add --preserve-argv0 in qemu-binfmt-conf.sh to configure the preserve-argv0
flag.
This patch allows to use new flag in AT_FLAGS to detect if
preserve-argv0 is configured for this interpreter:
argv[0] (the full pathname provided by binfmt-misc) is removed and
replaced by argv[1] (the original argv[0] provided by binfmt-misc when
'P'/preserve-arg[0] is set)
For instance with this patch and kernel support for AT_FLAGS:
$ sudo chroot m68k-chroot sh -c 'echo $0'
sh
without this patch:
$ sudo chroot m68k-chroot sh -c 'echo $0'
/usr/bin/sh
The new flag is available in kernel (v5.12) since: 2347961b11d4 ("binfmt_misc: pass binfmt_misc flags to the interpreter")
projects / mirror_qemu.git / log