Quinn Tran [Wed, 26 Feb 2020 22:40:15 +0000 (14:40 -0800)]
scsi: qla2xxx: Force semaphore on flash validation failure
For single port 28XX adapter, the second core can still run in the
background. The flash semaphore can be held by the non-active core.
This patch tell MPI FW to check for this case and clear the semaphore
from the non-active core.
Andrew Vasquez [Wed, 26 Feb 2020 22:40:13 +0000 (14:40 -0800)]
scsi: qla2xxx: Update BPM enablement semantics.
commit e4e3a2ce9556 ("scsi: qla2xxx: Add ability to autodetect SFP
type") takes a heavy handed approach to BPM (Buffer Plus Management)
enablement:
1) During hardware initialization, if an LR-capable transceiver is
recognized, the driver schedules a disruptive post-initialization
chip-reset (ISP-ABORT) to allow the BPM settings to be sent to the
firmware. This chip-reset will result in (short-term) path-loss to
all fc-rports and their attached SCSI devices.
2) LR-detection is triggered during any link-up event, resulting in a
refresh and potential chip-reset
Based on firmware-team guidance, upon LR-capable transceiver
recognition, the driver's hardware initialization code will now
re-execute firmware with the new BPM settings, then continue on with
driver initialization. To address the second issue, the driver
performs LR-capable detection upon the driver receiving a
transceiver-insertion asynchronous event from firmware. No short-term
path loss is needed with this new semantic.
Andrew Vasquez [Wed, 26 Feb 2020 22:40:11 +0000 (14:40 -0800)]
scsi: qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs
There's no point checking flags.disable_msix_handshake in the
interrupt handler hot-path. Instead perform the check during
queue-pair instantiation and use the proper interrupt handler.
Bart Van Assche [Thu, 20 Feb 2020 04:34:40 +0000 (20:34 -0800)]
scsi: qla2xxx: Convert MAKE_HANDLE() from a define into an inline function
This patch allows sparse to verify the endianness of the arguments passed
to make_handle().
Link: https://lore.kernel.org/r/20200220043441.20504-5-bvanassche@acm.org Cc: Roman Bolshakov <r.bolshakov@yadro.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Thu, 20 Feb 2020 04:34:38 +0000 (20:34 -0800)]
scsi: qla2xxx: Suppress endianness complaints in qla2x00_configure_local_loop()
Instead of changing endianness in-place, write the data in CPU endian
format in another buffer and copy that buffer back. This patch does not
change any functionality but silences some sparse endianness warnings.
Link: https://lore.kernel.org/r/20200220043441.20504-3-bvanassche@acm.org Cc: Roman Bolshakov <r.bolshakov@yadro.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Thu, 20 Feb 2020 04:34:37 +0000 (20:34 -0800)]
scsi: qla2xxx: Simplify the code for aborting SCSI commands
Since the SCSI core does not reuse the tag of the SCSI command that is
being aborted by .eh_abort() before .eh_abort() has finished it is not
necessary to check from inside that callback whether or not the SCSI
command has already completed. Instead, rely on the firmware to return an
error code when attempting to abort a command that has already
completed. Additionally, rely on the firmware to return an error code when
attempting to abort an already aborted command.
In qla2x00_abort_srb(), use blk_mq_request_started() instead of
sp->completed and sp->aborted.
Link: https://lore.kernel.org/r/20200220043441.20504-2-bvanassche@acm.org Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20200227201148.13973-1-hmadhani@marvell.com Fixes: a31056ddc665 ("scsi: qla2xxx: Use endian macros to assign static fields in fwdump header") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merlijn Wajer [Tue, 18 Feb 2020 14:39:17 +0000 (15:39 +0100)]
scsi: sr: get rid of sr global mutex
When replacing the Big Kernel Lock in commit 2a48fc0ab242 ("block:
autoconvert trivial BKL users to private mutex"), the lock was replaced
with a sr-wide lock.
This causes very poor performance when using multiple sr devices, as the sr
driver was not able to execute more than one command to one drive at any
given time, even when there were many CD drives available.
Replace the global mutex with per-sr-device mutex.
Someone tried this patch at the time, but it never made it upstream, due to
possible concerns with race conditions, but it's not clear the patch
actually caused those:
scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabled
This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.
The logic behind the quirks is always built into the sr driver.
This also removes the config from all the defconfig files that are enabling
this already.
Hannes Reinecke [Thu, 13 Feb 2020 15:32:06 +0000 (16:32 +0100)]
scsi: ch: synchronize ch_probe() and ch_open()
The 'ch' device node is created before the configuration is being read in,
which leads to a race window when ch_open() is called before that.
To avoid any races we should be taking the device mutex during
ch_readconfig() and ch_init_elem(), and also during ch_open().
That ensures ch_probe is finished before ch_open() completes.
Hannes Reinecke [Thu, 13 Feb 2020 15:32:05 +0000 (16:32 +0100)]
scsi: ch: fixup refcounting imbalance for SCSI devices
The SCSI device is required to be present during ch_probe() and ch_open().
But the SCSI device itself is only checked during ch_open(), so it's anyones
guess if it had been present during ch_probe(). And consequently we can't
reliably detach it during ch_release(), as ch_remove() might have been
called first. So initialize the changer device during ch_probe(), and take
a reference to the SCSI device during both ch_probe() and ch_open().
Joe Carnuccio [Wed, 12 Feb 2020 21:44:25 +0000 (13:44 -0800)]
scsi: qla2xxx: Handle cases for limiting RDP response payload length
This patch reduces RDP response payload length, if requesting port is a
domain controller (sid 0xfffc01) and fw is earlier than 8.09.00 and fw is
not 8.05.65 then limit the RDP response payload length to maximum of 256
bytes by terminating the response just before the optical element
descriptor.
Joe Carnuccio [Wed, 12 Feb 2020 21:44:19 +0000 (13:44 -0800)]
scsi: qla2xxx: Add ql2xrdpenable module parameter for RDP
This patch provides separate module parameter ql2xrdpenable to turn on/off
RDP capability in the driver. However, if ql2xsmartsan parameter is
enabled, it will also turn on ql2xfdmienable parameter since it is required
for RDP to work.
Joe Carnuccio [Wed, 12 Feb 2020 21:44:18 +0000 (13:44 -0800)]
scsi: qla2xxx: Add vendor extended RDP additions and amendments
This patch adds RDP command support in the driver. With the help of new
ql2xsmartsan parameter, driver will use PUREX IOCB mode to send RDP command
to switch and will be able to receive various diagnostic data.
Joe Carnuccio [Wed, 12 Feb 2020 21:44:17 +0000 (13:44 -0800)]
scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP
This patch prepares code for implementing Vendor specific extended FDMI/RDP
commands. It also addes support for MBC_GET_PORT_DATABASE and
MBC_GET_RNID_PARAMS commands.
Joe Carnuccio [Wed, 12 Feb 2020 21:44:12 +0000 (13:44 -0800)]
scsi: qla2xxx: Add beacon LED config sysfs interface
This patch provides an interface to do the following (using MBC 0x3B):
- Displays (in hex) the LED config words for all three LEDs.
- Programs the config words for one LED or for all three LEDs.
The sysfs node defined is named beacon_config.
First, to allow driver to gain LED control, do this:
# echo 1 > /sys/class/scsi_host/host#/beacon
Then, to display config words for all three LEDs do this:
# cat /sys/class/scsi_host/host#/beacon_config
To set config words for all three LEDs do this:
# echo 3 xxxx yyyy zzzz > /sys/class/scsi_host/host#/beacon_config
Or, to set config word for a specific single LED n do this:
# echo n xxxx > /sys/class/scsi_host/host#/beacon_config
where n is the LED number (0, 1, 2)
Finally, to restore LED control back to firmware, do this:
# echo 0 > /sys/class/scsi_host/host#/beacon
David Disseldorp [Fri, 21 Feb 2020 09:44:01 +0000 (10:44 +0100)]
scsi: target: use an enum to track emulate_ua_intlck_ctrl
The emulate_ua_intlck_ctrl device attribute accepts values of 0, 1 or 2 via
ConfigFS, which map to unit attention interlocks control codes in the MODE
SENSE control Mode Page. Use an enum to track these values so that it's
clear that, unlike the remaining emulate_X attributes,
emulate_ua_intlck_ctrl isn't boolean.
Link: https://marc.info/?l=target-devel&m=158227825428798 Suggested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
David Disseldorp [Wed, 19 Feb 2020 13:01:36 +0000 (14:01 +0100)]
scsi: target: convert boolean se_dev_attrib types to bool
This should harden us against configfs API regressions similar to the one
fixed by the previous commit.
Link: https://marc.info/?l=target-devel&m=158211731505174 Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The LIO unmap_zeroes_data device attribute is mapped to the LBPRZ flag in
the READ CAPACITY(16) and Thin Provisioning VPD INQUIRY responses.
The unmap_zeroes_data attribute is exposed via configfs, where any write
value is correctly validated via strtobool(). However, when initialised via
target_configure_unmap_from_queue() it takes the value of the device's
max_write_zeroes_sectors queue limit, which is non-boolean.
A non-boolean value can be read from configfs, but attempting to write the
same value back results in -EINVAL, causing problems for configuration
utilities such as targetcli.
Link: https://marc.info/?l=target-devel&m=158213354011309 Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: advansys: Replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare variable-length
types such as these ones is a flexible array member[1][2], introduced in
C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
James Smart [Mon, 10 Feb 2020 17:31:55 +0000 (09:31 -0800)]
scsi: lpfc: add RDF registration and Link Integrity FPIN logging
This patch modifies lpfc to register for Link Integrity events via the use
of an RDF ELS and to perform Link Integrity FPIN logging.
Specifically, the driver was modified to:
- Format and issue the RDF ELS immediately following SCR registration.
This registers the ability of the driver to receive FPIN ELS.
- Adds decoding of the FPIN els into the received descriptors, with
logging of the Link Integrity event information. After decoding, the ELS
is delivered to the scsi fc transport to be delivered to any user-space
applications.
- To aid in logging, simple helpers were added to create enum to name
string lookup functions that utilize the initialization helpers from the
fc_els.h header.
- Note: base header definitions for the ELS's don't populate the
descriptor payloads. As such, lpfc creates it's own version of the
structures, using the base definitions (mostly headers) and additionally
declaring the descriptors that will complete the population of the ELS.
James Smart [Mon, 10 Feb 2020 17:31:54 +0000 (09:31 -0800)]
scsi: fc: Update Descriptor definition and add RDF and Link Integrity FPINs
Update the FC headers for the RDF ELS and populate out the FPIN ELS and the
Link integrity FPIN payload.
RDF is used to register for diagnostic events.
FPIN is how the fabric reports a diagnostic event.
Specifically, this patch:
- Adds the formal definition of TLV descriptors that are now used in a lot
of the FC spec. The simplistic fc_fn_desc structure, basically no more
than the tlv definition, is removed.
- Small tlv helper functions are added as defines.
- The list of known Descriptor tags (identifying the TLV) is expanded and
a name initializer introduced.
- The LSRI descriptor, returned in many new ELS response payloads is
added.
- The RDF ELS code is added, and the RDF request response structures
added.
- The FPIN els definition is corrected.
- A full definition of a Link Integrity Notification descriptor is added,
[mkp: rolled in kbuild warning fix]
Link: https://lore.kernel.org/r/20200210173155.547-2-jsmart2021@gmail.com Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Tue, 11 Feb 2020 03:40:50 +0000 (19:40 -0800)]
scsi: ufs-qcom: Delay specific time before gate ref clk
After enter hibern8, as UFS JEDEC ver 3.0 requires, a specific gating wait
time is required before disable the device reference clock. If it is not
specified, use the old delay.
Can Guo [Tue, 11 Feb 2020 03:40:49 +0000 (19:40 -0800)]
scsi: ufs: Add dev ref clock gating wait time support
In UFS version 3.0, a newly added attribute bRefClkGatingWaitTime defines
the minimum time for which the reference clock is required by device during
transition to LS-MODE or HIBERN8 state. Make this change to reflect the new
requirement by adding delays before turning off the clock.
Link: https://lore.kernel.org/r/1581392451-28743-7-git-send-email-cang@codeaurora.org Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Tue, 11 Feb 2020 03:40:48 +0000 (19:40 -0800)]
scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
The async version of ufshcd_hold(async == true), which is only called in
queuecommand path as for now, is expected to work in atomic context, thus
it should not sleep or schedule out. When it runs into the condition that
clocks are ON but link is still in hibern8 state, it should bail out
without flushing the clock ungate work.
Fixes: f2a785ac2312 ("scsi: ufshcd: Fix race between clk scaling and ungate work") Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.org Reviewed-by: Hongwu Su <hongwus@codeaurora.org> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Tue, 11 Feb 2020 03:40:46 +0000 (19:40 -0800)]
scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
The bus bandwidth voting is required to be done before the bus clocks are
enabled, and the unvoting is required to be done only after the bus clocks
are disabled.
Asutosh Das [Tue, 11 Feb 2020 03:40:45 +0000 (19:40 -0800)]
scsi: ufs: set load before setting voltage in regulators
This sequence change is required to avoid dips in voltage during boot-up.
Apparently, this dip is caused because in the original sequence, the
regulators are initialized in lpm mode. And then when the load is set to
high, and more current is drawn, than is allowed in lpm, the dip is seen.
Link: https://lore.kernel.org/r/1581392451-28743-3-git-send-email-cang@codeaurora.org Reviewed-by: Hongwu Su <hongwus@codeaurora.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sayali Lokhande [Tue, 11 Feb 2020 03:40:44 +0000 (19:40 -0800)]
scsi: ufs: Flush exception event before suspend
Exception event can be raised by the device when system suspend is in
progress. This will result in unclocked register access in exception event
handler as clocks will be turned off during suspend. This change makes sure
to flush exception event handler work in suspend before disabling clocks to
avoid unclocked register access issue.
Link: https://lore.kernel.org/r/1581392451-28743-2-git-send-email-cang@codeaurora.org Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Can Guo [Wed, 12 Feb 2020 05:38:29 +0000 (21:38 -0800)]
scsi: ufs: Select INITIAL ADAPT type for HS Gear4
ADAPT is added specifically for HS Gear4 mode only. Select INITIAL ADAPT
before power mode change to G4 and select NO ADAPT before switch to non-G4
modes.
Stanley Chu [Fri, 7 Feb 2020 07:03:57 +0000 (15:03 +0800)]
scsi: ufs: introduce common function to disable host TX LCC
Many vendors would like to disable host TX LCC during initialization
flow. Introduce a common function for all users to make drivers easier to
read and maintained. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20200207070357.17169-3-stanley.chu@mediatek.com Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MediaTek UFS host requires TX LCC to be disabled on both host and device
sides. This can be done by disabling host's local TX LCC before link
startup. Correct TX LCC disabling timing in MediaTek UFS driver.
James Smart [Tue, 28 Jan 2020 00:23:09 +0000 (16:23 -0800)]
scsi: lpfc: Clean up hba max_lun_queue_depth checks
The current code does some odd +1 over maximum xri count checks and
requires that the lun_queue_count can't be bigger than maximum xri count
divided by 8. These items are bogus.
Clean the code up to cap lun_queue_count to maximum xri count.
James Smart [Tue, 28 Jan 2020 00:23:08 +0000 (16:23 -0800)]
scsi: lpfc: Remove handler for obsolete ELS - Read Port Status (RPS)
There was report of an odd "Fix me..." log message, which was tracked down
to the lpfc_els_rcv_rps() routine. This was in handling of a very old and
obsolete ELS - Read Port Status. The RPS ELS was defined in FC-LS-1, but
deprecated in FC-LS-2, and removed from all later FC-LS revisions. It was
replaced by the Read Diagnostic Parameters (RDP) ELS and the Link Error
Status Block descriptor.
There should be no support for the RSP ELS. Remove support from driver.
James Smart [Tue, 28 Jan 2020 00:23:07 +0000 (16:23 -0800)]
scsi: lpfc: Fix coverity errors in fmdi attribute handling
Coverity reported a memory corruption error for the fdmi attributes
routines:
CID 15768 [Memory Corruption] Out-of-bounds access on FDMI
Sloppy coding of the fmdi structures. In both the lpfc_fdmi_attr_def and
lpfc_fdmi_reg_port_list structures, a field was placed at the start of
payload that may have variable content. The field was given an arbitrary
type (uint32_t). The code then uses the field name to derive an address,
which it used in things such as memset and memcpy. The memset sizes or
memcpy lengths were larger than the arbitrary type, thus coverity reported
an error.
Fix by replacing the arbitrary fields with the real field structures
describing the payload.
James Smart [Tue, 28 Jan 2020 00:23:06 +0000 (16:23 -0800)]
scsi: lpfc: Fix compiler warning on frame size
The following error is see from the compiler:
drivers/scsi/lpfc/lpfc_init.c: In function
‘lpfc_cpuhp_get_eq’: drivers/scsi/lpfc/lpfc_init.c:12660:1:
error: the frame size of 1032 bytes is larger than 1024 bytes
[-Werror=frame-larger-than=]
The issue is due to allocating a cpumask on the stack.
Fix by converting to a dynamical allocation of the cpu mask.
James Smart [Tue, 28 Jan 2020 00:23:05 +0000 (16:23 -0800)]
scsi: lpfc: Fix release of hwq to clear the eq relationship
When performing reset testing, the eq's list for related hwqs was getting
corrupted. In cases where there is not a 1:1 eq to hwq, the eq is
shared. The eq maintains a list of hwqs utilizing it in case of cpu
offlining and polling. During the reset, the hwqs are being torn down so
they can be recreated. The recreation was getting confused by seeing a
non-null eq assignment on the eq and the eq list became corrupt.
Correct by clearing the hdwq eq assignment when the hwq is cleaned up.
James Smart [Tue, 28 Jan 2020 00:23:03 +0000 (16:23 -0800)]
scsi: lpfc: Fix broken Credit Recovery after driver load
When driver is set to enable bb credit recovery, the switch displayed the
setting as inactive. If the link bounces, it switches to Active.
During link up processing, the driver currently does a MBX_READ_SPARAM
followed by a MBX_CONFIG_LINK. These mbox commands are queued to be
executed, one at a time and the completion is processed by the worker
thread. Since the MBX_READ_SPARAM is done BEFORE the MBX_CONFIG_LINK, the
BB_SC_N bit is never set the the returned values. BB Credit recovery status
only gets set after the driver requests the feature in CONFIG_LINK, which
is done after the link up. Thus the ordering of READ_SPARAM needs to follow
the CONFIG_LINK.
Fix by reordering so that READ_SPARAM is done after CONFIG_LINK. Added a
HBA_DEFER_FLOGI flag so that any FLOGI handling waits until after the
READ_SPARAM is done so that the proper BB credit value is set in the FLOGI
payload.
Fixes: 6bfb16208298 ("scsi: lpfc: Fix configuration of BB credit recovery in service parameters") Cc: <stable@vger.kernel.org> # v5.4+ Link: https://lore.kernel.org/r/20200128002312.16346-4-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 28 Jan 2020 00:23:01 +0000 (16:23 -0800)]
scsi: lpfc: Fix RQ buffer leakage when no IOCBs available
The driver is occasionally seeing the following SLI Port error, requiring
reset and reinit:
Port Status Event: ... error 1=0x52004a01, error 2=0x218
The failure means an RQ timeout. That is, the adapter had received
asynchronous receive frames, ran out of buffer slots to place the frames,
and the driver did not replenish the buffer slots before a timeout
occurred. The driver should not be so slow in replenishing buffers that a
timeout can occur.
When the driver received all the frames of a sequence, it allocates an IOCB
to put the frames in. In a situation where there was no IOCB available for
the frame of a sequence, the RQ buffer corresponding to the first frame of
the sequence was not returned to the FW. Eventually, with enough traffic
encountering the situation, the timeout occurred.
Fix by releasing the buffer back to firmware whenever there is no IOCB for
the first frame.
Ming Lei [Sun, 19 Jan 2020 07:14:28 +0000 (15:14 +0800)]
scsi: core: remove .for_blk_mq
Not in use anymore. Remove the flag.
Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bart.vanassche@wdc.com> Link: https://lore.kernel.org/r/20200119071432.18558-3-ming.lei@redhat.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Wed, 29 Jan 2020 10:52:51 +0000 (18:52 +0800)]
scsi: ufs: ufs-mediatek: gate ref-clk during Auto-Hibern8
In current UFS driver design, hba->uic_link_state will not be changed after
link enters Hibern8 state by Auto-Hibern8 mechanism. In this case,
reference clock gating will be skipped unless special handling is
implemented in vendor's callbacks.
Support reference clock gating during Auto-Hibern8 period in MediaTek
Chipsets: If link state is already in Hibern8 while Auto-Hibern8 feature is
enabled, gate reference clock in setup_clocks callback.
Stanley Chu [Wed, 29 Jan 2020 10:52:50 +0000 (18:52 +0800)]
scsi: ufs: fix Auto-Hibern8 error detection
Auto-Hibern8 may be disabled by some vendors or sysfs in runtime even if
Auto-Hibern8 capability is supported by host. If Auto-Hibern8 capability is
supported by host but not actually enabled, Auto-Hibern8 error shall not
happen.
To fix this, provide a way to detect if Auto-Hibern8 is actually enabled
first, and bypass Auto-Hibern8 disabling case in
ufshcd_is_auto_hibern8_error().
Fixes: 821744403913 ("scsi: ufs: Add error-handling of Auto-Hibernate") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200129105251.12466-4-stanley.chu@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Wed, 29 Jan 2020 10:52:49 +0000 (18:52 +0800)]
scsi: ufs: ufs-mediatek: support linkoff state during suspend
If system suspend or runtime suspend mode is configured as linkoff state,
phy can be powered off and reference clock can be gated in MediaTek
Chipsets.
At the same time, remove redundant reference clock control in suspend and
resume callbacks because such control can be well-handled in setup_clocks
callback.
Stanley Chu [Wed, 29 Jan 2020 10:52:48 +0000 (18:52 +0800)]
scsi: ufs: ufs-mediatek: ensure UniPro is not powered down before linkup
MediaTek Chipsets can enter proprietary UniPro low-power mode during
suspend while link is in hibern8 state. Make sure leaving low-power mode
before every link startup to prevent lockup in any possible error recovery
path.
At the same time, re-factor related funcitons to improve code readability.
Bharath Ravi [Sat, 25 Jan 2020 06:19:25 +0000 (01:19 -0500)]
scsi: iscsi: Perform connection failure entirely in kernel space
Connection failure processing depends on a daemon being present to (at
least) stop the connection and start recovery. This is a problem on a
multipath scenario, where if the daemon failed for whatever reason, the
SCSI path is never marked as down, multipath won't perform the failover and
IO to the device will be forever waiting for that connection to come back.
This patch performs the connection failure entirely inside the kernel.
This way, the failover can happen and pending IO can continue even if the
daemon is dead. Once the daemon comes alive again, it can execute recovery
procedures if applicable.
Cc: Mike Christie <mchristi@redhat.com> Cc: Lee Duncan <LDuncan@suse.com> Cc: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20200125061925.191601-1-krisman@collabora.com Co-developed-by: Dave Clausen <dclausen@google.com> Co-developed-by: Nick Black <nlb@google.com> Co-developed-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Co-developed-by: Anatol Pomazau <anatol@google.com> Co-developed-by: Tahsin Erdogan <tahsin@google.com> Co-developed-by: Frank Mayhar <fmayhar@google.com> Co-developed-by: Junho Ryu <jayr@google.com> Co-developed-by: Khazhismel Kumykov <khazhy@google.com> Reviewed-by: Reviewed-by: Khazhismel Kumykov <khazhy@google.com> Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Bharath Ravi <rbharath@google.com> Signed-off-by: Dave Clausen <dclausen@google.com> Signed-off-by: Nick Black <nlb@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Anatol Pomazau <anatol@google.com> Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Frank Mayhar <fmayhar@google.com> Signed-off-by: Junho Ryu <jayr@google.com> Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Fri, 3 Jan 2020 19:27:19 +0000 (11:27 -0800)]
scsi: tcm_qla2xxx: Make qlt_alloc_qfull_cmd() set cmd->se_cmd.map_tag
Reduce code duplication by introducing the tcm_qla2xxx_{get,rel}_cmd()
functions. Introduce these functions in the tcm_qla2xxx.c source files such
that the qla_target.c source file becomes independent of the SCSI target
core header files. This patch fixes a bug, namely by ensuring that
qlt_alloc_qfull_cmd() sets cmd->se_cmd.map_tag.
Cc: Himanshu Madhani <hmadhani@marvell.com> Link: https://lore.kernel.org/r/20200103192719.205158-1-bvanassche@acm.org Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Linus Torvalds [Mon, 10 Feb 2020 00:05:50 +0000 (16:05 -0800)]
Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
Linus Torvalds [Sun, 9 Feb 2020 23:51:46 +0000 (15:51 -0800)]
Merge tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull new zonefs file system from Damien Le Moal:
"Zonefs is a very simple file system exposing each zone of a zoned
block device as a file.
Unlike a regular file system with native zoned block device support
(e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
sequential write constraint of zoned block devices to the user. As a
result, zonefs is not a POSIX compliant file system. Its goal is to
simplify the implementation of zoned block devices support in
applications by replacing raw block device file accesses with a richer
file based API, avoiding relying on direct block device file ioctls
which may be more obscure to developers.
One example of this approach is the implementation of LSM
(log-structured merge) tree structures (such as used in RocksDB and
LevelDB) on zoned block devices by allowing SSTables to be stored in a
zone file similarly to a regular file system rather than as a range of
sectors of a zoned device. The introduction of the higher level
construct "one file is one zone" can help reducing the amount of
changes needed in the application while at the same time allowing the
use of zoned block devices with various programming languages other
than C.
Zonefs IO management implementation uses the new iomap generic code.
Zonefs has been successfully tested using a functional test suite
(available with zonefs userland format tool on github) and a prototype
implementation of LevelDB on top of zonefs"
* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Add documentation
fs: New zonefs file system
Linus Torvalds [Sun, 9 Feb 2020 21:27:17 +0000 (13:27 -0800)]
Merge tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"13 cifs/smb3 patches, most from testing at the SMB3 plugfest this week:
- Important fix for multichannel and for modefromsid mounts.
- Two reconnect fixes
- Addition of SMB3 change notify support
- Backup tools fix
- A few additional minor debug improvements (tracepoints and
additional logging found useful during testing this week)"
* tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add defines for new information level, FileIdInformation
smb3: print warning once if posix context returned on open
smb3: add one more dynamic tracepoint missing from strict fsync path
cifs: fix mode bits from dir listing when mounted with modefromsid
cifs: fix channel signing
cifs: add SMB3 change notification support
cifs: make multichannel warning more visible
cifs: fix soft mounts hanging in the reconnect code
cifs: Add tracepoints for errors on flush or fsync
cifs: log warning message (once) if out of disk space
cifs: fail i/o on soft mounts if sessionsetup errors out
smb3: fix problem with null cifs super block with previous patch
SMB3: Backup intent flag missing from some more ops
Linus Torvalds [Sun, 9 Feb 2020 20:41:00 +0000 (12:41 -0800)]
Merge branch 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vboxfs from Al Viro:
"This is the VirtualBox guest shared folder support by Hans de Goede,
with fixups for fs_parse folded in to avoid bisection hazards from
those API changes..."
* 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Add VirtualBox guest shared folder (vboxsf) support
Linus Torvalds [Sun, 9 Feb 2020 20:11:12 +0000 (12:11 -0800)]
Merge tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when
the TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused
an infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects
PCI devices with non-maskable MSI interrupts. The problem is caused
by the non-atomic writes of the MSI address (destination APIC id)
and data (vector) fields which the device uses to construct the MSI
message. The non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after
writing address and before writing data, then the MSI block
constructs a inconsistent message which causes interrupts to be
lost and subsequent malfunction of the device.
The fix is to redirect the interrupt to the new vector on the
current CPU first and then switch it over to the new target CPU.
This allows to observe an eventually raised interrupt in the
transitional stage (old CPU, new vector) to be observed in the APIC
IRR and retriggered on the new target CPU and the new vector.
The potential spurious interrupts caused by this are harmless and
can in the worst case expose a buggy driver (all handlers have to
be able to deal with spurious interrupts as they can and do happen
for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall
page which prevents resume hibernation on HYPERV guests. This
change got lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent
potentially stale IOAPIC remote IRR bits which cause stale
interrupt lines after resume"
* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Mask IOAPIC entries when disabling the local APIC
x86/hyperv: Suspend/resume the hypercall page for hibernation
x86/apic/msi: Plug non-maskable MSI affinity race
x86/boot: Handle malformed SRAT tables during early ACPI parsing
x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
Linus Torvalds [Sun, 9 Feb 2020 20:09:43 +0000 (12:09 -0800)]
Merge tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP fixes from Thomas Gleixner:
"Two fixes for the SMP related functionality:
- Make the UP version of smp_call_function_single() match SMP
semantics when called for a not available CPU. Instead of emitting
a warning and assuming that the function call target is CPU0,
return a proper error code like the SMP version does.
- Remove a superfluous check in smp_call_function_many_cond()"
* tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp/up: Make smp_call_function_single() match SMP semantics
smp: Remove superfluous cond_func check in smp_call_function_many_cond()
Linus Torvalds [Sun, 9 Feb 2020 20:04:09 +0000 (12:04 -0800)]
Merge tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of fixes and improvements for the perf subsystem:
Kernel fixes:
- Install cgroup events to the correct CPU context to prevent a
potential list double add
- Prevent an integer underflow in the perf mlock accounting
- Add a missing prototype for arch_perf_update_userpage()
Tooling:
- Add a missing unlock in the error path of maps__insert() in perf
maps.
- Fix the build with the latest libbfd
- Fix the perf parser so it does not delete parse event terms, which
caused a regression for using perf with the ARM CoreSight as the
sink configuration was missing due to the deletion.
- Fix the double free in the perf CPU map merging test case
- Add the missing ustring support for the perf probe command"
* tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf maps: Add missing unlock to maps__insert() error case
perf probe: Add ustring support for perf probe command
perf: Make perf able to build with latest libbfd
perf test: Fix test case Merge cpu map
perf parse: Copy string to perf_evsel_config_term
perf parse: Refactor 'struct perf_evsel_config_term'
kernel/events: Add a missing prototype for arch_perf_update_userpage()
perf/cgroups: Install cgroup events to correct cpuctx
perf/core: Fix mlock accounting in perf_mmap()
Linus Torvalds [Sun, 9 Feb 2020 20:00:12 +0000 (12:00 -0800)]
Merge tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two small fixes for the time(r) subsystem:
- Handle a subtle race between the clocksource watchdog and a
concurrent clocksource watchdog stop/start sequence correctly to
prevent a timer double add bug.
- Fix the file path for the core time namespace file"
* tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Prevent double add_timer_on() for watchdog_timer
MAINTAINERS: Correct path to time namespace source file
Linus Torvalds [Sun, 9 Feb 2020 19:56:41 +0000 (11:56 -0800)]
Merge tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem:
- Provision only ACPI enabled redistributors on GICv3
- Use the proper command colums when building the INVALL command for
the GICv3-ITS
- Ensure the allocation of the L2 vPE table for GICv4.1
- Correct the GICv4.1 VPROBASER programming so it uses the proper
size
- A set of small GICv4.1 tidy up patches
- Configuration cleanup for C-SKY interrupt chip
- Clarify the function documentation for irq_set_wake() to document
that the wakeup functionality is orthogonal to the irq
disable/enable mechanism"
* tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors
irqchip/gic-v3-its: Remove superfluous WARN_ON
irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd()
irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level
irqchip/gic-v4.1: Set vpe_l1_base for all redistributors
irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE
genirq: Clarify that irq wake state is orthogonal to enable/disable
irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL
irqchip: Some Kconfig cleanup for C-SKY
irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
Linus Torvalds [Sun, 9 Feb 2020 19:54:50 +0000 (11:54 -0800)]
Merge tag 'efi-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Thomas Gleixner:
"A single fix for a EFI boot regression on X86 which was caused by the
recent rework of the EFI memory map parsing. On systems with invalid
memmap entries the cleanup function uses an value which cannot be
relied on in this stage. Use the actual EFI memmap entry instead"
* tag 'efi-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Fix boot regression on systems with invalid memmap entries
1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris.
2) Fix thermal zone registration in iwlwifi, from Andrei
Otcheretianski.
3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer.
4) Use after free in mptcp, from Florian Westphal.
5) Use after free in wireguard's root_remove_peer_lists, from Eric
Dumazet.
6) Properly access packets heads in bonding alb code, from Eric
Dumazet.
7) Fix data race in skb_queue_len(), from Qian Cai.
8) Fix regression in r8169 on some chips, from Heiner Kallweit.
9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang.
10) Certain kinds of set link netlink operations can cause a NULL deref
in the ipv6 addrconf code. Fix from Eric Dumazet.
11) Don't cancel uninitialized work queue in drop monitor, from Ido
Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: thunderx: use proper interface type for RGMII
mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap
bpf: Improve bucket_log calculation logic
selftests/bpf: Test freeing sockmap/sockhash with a socket in it
bpf, sockhash: Synchronize_rcu before free'ing map
bpf, sockmap: Don't sleep while holding RCU lock on tear-down
bpftool: Don't crash on missing xlated program instructions
bpf, sockmap: Check update requirements after locking
drop_monitor: Do not cancel uninitialized work item
mlxsw: spectrum_dpipe: Add missing error path
mlxsw: core: Add validation of hardware device types for MGPIR register
mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort
selftests: mlxsw: Add test cases for local table route replacement
mlxsw: spectrum_router: Prevent incorrect replacement of local table routes
net: dsa: microchip: enable module autoprobe
ipv6/addrconf: fix potential NULL deref in inet6_set_link_af()
dpaa_eth: support all modes with rate adapting PHYs
net: stmmac: update pci platform data to use phy_interface
net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter
net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter
...
Hans de Goede [Thu, 12 Dec 2019 14:09:14 +0000 (15:09 +0100)]
fs: Add VirtualBox guest shared folder (vboxsf) support
VirtualBox hosts can share folders with guests, this commit adds a
VFS driver implementing the Linux-guest side of this, allowing folders
exported by the host to be mounted under Linux.
This driver depends on the guest <-> host IPC functions exported by
the vboxguest driver.
Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 8 Feb 2020 22:28:26 +0000 (14:28 -0800)]
Merge tag 'powerpc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix an existing bug in our user access handling, exposed by one of
the bug fixes we merged this cycle.
- A fix for a boot hang on 32-bit with CONFIG_TRACE_IRQFLAGS and the
recently added CONFIG_VMAP_STACK.
Thanks to: Christophe Leroy, Guenter Roeck.
* tag 'powerpc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix CONFIG_TRACE_IRQFLAGS with CONFIG_VMAP_STACK
powerpc/futex: Fix incorrect user access blocking