Seth Forshee [Fri, 1 Dec 2017 21:08:32 +0000 (15:08 -0600)]
UBUNTU: SAUCE: mm: disable vma based swap readahead by default
BugLink: http://bugs.launchpad.net/bugs/1732463
Starting with 4.14 our test for CVE-2015-7550 started oopsing the
kernel on i386 with the following stack trace:
I'm not able to reproduce this outside of ADT, but vma based swap
readahead is a new feature in 4.14 so it seems quite likely that
this is where the bug lies. However I'm not able to reproduce the
problem outside of ADT to confirm this.
So for now disable this feature by default so we can see if that
gets the test to pass. It can still be enabled by writing to
/sys/kernel/mm/swap/vma_ra_enabled if desired.
Seth Forshee [Mon, 23 Oct 2017 17:43:58 +0000 (12:43 -0500)]
UBUNTU: hio: Update io stat accounting for 4.14
In 4.14-rc1 invflight accounting calls were updated to require a
request queue be passed, and part_(inc|dec)_in_flight() were
moved out of linux/genhd.h and are not exported to modules. Make
a couple of updates to cope with these changes:
- Pass the rq to part_round_stats for 4.14 and later.
- Use generic_(start|end)_io_acct() helpers for io accounting
with 4.14 and later. These do exactly what was being done with
the no-longer-exported interfaces.
Seth Forshee [Mon, 23 Oct 2017 17:38:10 +0000 (12:38 -0500)]
UBUNTU: hio: Use correct sizes when initializing ssd_index_bits* arrays
The memsets which initialize these arrays use a size of the
number of elements in the array without multplying by the size of
the array elements, therefore these arrays are only partially
initialized. Fix this by using sizeof to trivially get the
correct size for these arrays.
UBUNTU: SAUCE: hio: Fix incorrect use of enum req_opf values
BugLink: http://bugs.launchpad.net/bugs/1701316
Patch from Huawei to fix incorrect use of enumerated values for
bio operations as bitmasks. A reordering of the enum in 4.10
caused a change in behavior which has been leading to data
corruption.
Jay Vosburgh [Wed, 11 Nov 2015 13:04:50 +0000 (13:04 +0000)]
UBUNTU: SAUCE: fan: add VXLAN implementation
Generify the fan mapping support and utilise that to implement fan
mappings over vxlan transport.
Expose the existance of this functionality (when the module is loaded)
via an additional sysctl marker.
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
[apw@canonical.com: added feature marker for fan over vxlan.] Signed-off-by: Andy Whitcroft <apw@canonical.com>
Conflicts:
drivers/net/vxlan.c
include/uapi/linux/if_link.h
net/ipv4/ipip.c
Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Switch to a single tunnel for all mappings, this removes the limitations
on how many mappings each tunnel can handle, and therefore how many Fan
slices each local address may hold.
NOTE: This introduces a new kernel netlink interface which needs updated
iproute2 support.
BugLink: http://bugs.launchpad.net/bugs/1470091 Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
[saf: Fix conflicts during rebase to 4.12] Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Conflicts:
include/uapi/linux/if_tunnel.h
net/ipv4/ipip.c
Seth Forshee [Tue, 19 Jan 2016 19:12:02 +0000 (13:12 -0600)]
UBUNTU: SAUCE: overlayfs: Skip permission checking for trusted.overlayfs.* xattrs
The original mounter had CAP_SYS_ADMIN in the user namespace
where the mount happened, and the vfs has validated that the user
has permission to do the requested operation. This is sufficient
for allowing the kernel to write these specific xattrs, so we can
bypass the permission checks for these xattrs.
To support this, export __vfs_setxattr_noperm and add an similar
__vfs_removexattr_noperm which is also exported. Use these when
setting or removing trusted.overlayfs.* xattrs.
Ming Lei [Thu, 3 Nov 2016 01:20:01 +0000 (09:20 +0800)]
UBUNTU: SAUCE: hio: splitting bio in the entry of .make_request_fn
BugLink: http://bugs.launchpad.net/bugs/1638700
From v4.3, the incoming bio can be very big[1], and it is
required to split it first in .make_request_fn(), so
we need to do that for hio.c too.
Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
Signed-off-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Brad Figg <brad.figg@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com> BugLink: http://bugs.launchpad.net/bugs/1635594 Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Leann Ogasawara <leann.ogasawara@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it
is possible for a user-supplied ipt_entry structure to have a large
next_offset field. This field is not bounds checked prior to writing a
counter value at the supplied offset.
Problem is that xt_entry_foreach() macro stops iterating once e->next_offset
is out of bounds, assuming this is the last entry.
With malformed data thats not necessarily the case so we can
write outside of allocated area later as we might not have walked the
entire blob.
Fix this by simplifying mark_source_chains -- it already has to check
if nextoff is in range to catch invalid jumps, so just do the check
when we move to a next entry as well.
Also, check that the offset meets the xtables_entry alignment.
Reported-by: Ben Hawkes <hawkes@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Chris J. Arges <chris.j.arges@canonical.com> Acked-by: Brad Figg <brad.figg@canonical.com> Signed-off-by: Brad Figg <brad.figg@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Arjan van de Ven [Mon, 14 Mar 2016 17:06:46 +0000 (11:06 -0600)]
UBUNTU: SAUCE: Clear Linux: ksm-wakeups
reduce wakeups in ksm by adding rounding (aligning) when the sleep times are 1 second or longer
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
[ saf: update for conflicts when rebasing to v5.0 ] Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Arjan van de Ven [Tue, 23 Jun 2015 06:26:52 +0000 (01:26 -0500)]
UBUNTU: SAUCE: Clear Linux: i8042: decrease debug message level to info
Author: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Signed-off-by: Jose Carlos Venegas Munoz <jos.c.venegas.munoz@intel.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Serge Hallyn [Tue, 5 Jan 2016 20:12:21 +0000 (20:12 +0000)]
UBUNTU: SAUCE: add a sysctl to disable unprivileged user namespace unsharing
It is turned on by default, but can be turned off if admins prefer or,
more importantly, if a security vulnerability is found.
The intent is to use this as mitigation so long as Ubuntu is on the
cutting edge of enablement for things like unprivileged filesystem
mounting.
(This patch is tweaked from the one currently still in Debian sid, which
in turn came from the patch we had in saucy)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
[bwh: Remove unneeded binary sysctl bits]
[ saf: move extern unprivileged_userns_clone declaration to
include/linux/user_namespace.h to conform with 2374c09b1c8a
"sysctl: remove all extern declaration from sysctl.c" ] Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Tetsuo Handa [Sat, 29 Mar 2014 06:39:24 +0000 (15:39 +0900)]
UBUNTU: SAUCE: kthread: Do not leave kthread_create() immediately upon SIGKILL.
Commit 786235ee "kthread: make kthread_create() killable" changed to
leave kthread_create() as soon as receiving SIGKILL. But this change
caused boot failures if systemd-udevd worker process received SIGKILL
due to systemd's hardcoded 30 seconds timeout while loading fusion
driver using finit_module() [1].
Linux kernel people think that the systemd's hardcoded timeout is a
systemd bug. But systemd people think that loading of kernel module
needs more than 30 seconds is a kernel module's bug.
Although Linux kernel people are expecting fusion driver module not
to take more than 30 seconds, it will definitely not in time for
trusty kernel. Also, nobody can prove that fusion driver module is
the only case which is affected by commit 786235ee.
Therefore, this patch changes kthread_create() to wait for up to 10
seconds after receiving SIGKILL, unless chosen by the OOM killer,
in order to give the kthreadd a chance to complete the request.
The side effect of this patch is that current thread's response to
SIGKILL is delayed for a bit (likely less than a second, unlikely
10 seconds).
Andy Whitcroft [Wed, 16 Apr 2014 18:40:57 +0000 (19:40 +0100)]
UBUNTU: SAUCE: vt -- maintain bootloader screen mode and content until vt switch
Introduce a new VT mode KD_TRANSPARENT which endevours to leave the current
content of the framebuffer untouched. This allows the bootloader to insert
a graphical splash and have the kernel maintain it until the OS splash
can take over. When we finally switch away (either through programs like
plymouth or manually) the content is lost and the VT reverts to text mode.
UBUNTU: SAUCE: (no-up) ACPI: Disable Windows 8 compatibility for some Lenovo ThinkPads
The AML implementation for brightness control on several ThinkPads
contains a workaround to meet a Windows 8 requirement of 101 brightness
levels [1]. The implementation is flawed, as only 16 of the brighness
values reported by _BCL affect a change in brightness. _BCM silently
discards the rest of the values. Disabling Windows 8 compatibility on
these machines reverts them to the old behavior, making _BCL only report
the 16 brightness levels which actually work. Add a quirk to do this
along with a dmi callback to disable Win8 compatibility.
BugLink: http://bugs.launchpad.net/bugs/1558828
In case of ARCH_THUNDER, there is a need to allocate the GICv3 ITS table
which is bigger than the allowed max order. So we are forcing it only in
case of 4KB page size.
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: Robert Richter <rrichter@cavium.com>
[ dannf: Depend on ARM64_4K_PAGES instead of !ARM64_64K_PAGES now that
16K pages are available ] Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Mehmet Kayaalp [Thu, 10 Mar 2016 21:22:13 +0000 (16:22 -0500)]
UBUNTU: SAUCE: (noup) KEYS: Support for inserting a certificate into x86 bzImage
BugLink: http://bugs.launchpad.net/bugs/1558553
The config option SYSTEM_EXTRA_CERTIFICATE reserves space in vmlinux file,
which is compressed to create the self-extracting bzImage. This patch adds the
capability of extracting the vmlinux, inserting the certificate, and
repackaging the result into a bzImage.
It only works if the resulting compressed vmlinux is smaller than the original.
Otherwise re-linking would be required. To make the reserved space allocate
actual space in bzImage, a null key is inserted into vmlinux before creating
the bzImage:
make vmlinux
scripts/insert-sys-cert -b vmlinux -c /dev/null
make bzImage
After null key insertion, the script populates the rest of the reserved space
with random bytes, which have poor compression. After receiving a bzImage that
is created this way, actual certificate can be inserted into the bzImage:
Andy Whitcroft [Fri, 27 Nov 2015 17:38:30 +0000 (17:38 +0000)]
UBUNTU: SAUCE: (no-up) add compat_uts_machine= kernel command line override
We wish to use the arm64 buildds to build armhf binaries in 32bit chroots.
To make this work we need uname to return armv7l machine type. To achieve
this add a kernel command line override for the 32bit machine type.
Add compat_uts_machine=<type> to allow the LINUX32 personality to return
that type for uname.
BugLink: http://bugs.launchpad.net/bugs/1210848
On an ASUSTek G60JX laptop, the intel_ips driver spams the log with a warning message: "ME failed to update for more than 1s, likely hung". This ME doesn't support the feature, so requesting it be blacklisted for now.
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Nick Jenkins <tech.crew.jenkins@gmail.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Xiangliang Yu [Thu, 7 Mar 2013 14:29:16 +0000 (14:29 +0000)]
UBUNTU: SAUCE: (no-up) PCI: fix system hang issue of Marvell SATA host controller
BugLink: http://bugs.launchpad.net/bugs/1159863
Hassle someone if this patch hasn't been removed by 13.10.
See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159863/comments/2
Fix system hang issue: if first accessed resource file of BAR0 ~
BAR4, system will hang after executing lspci command
Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Instead of SEMI_MT, present a full mt interface with simulated contact
positions for >=3 fingers. Enables e.g. multi-finger tap and drag for
old userspace applications which only count the contact positions.
Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
BugLink: http://bugs.launchpad.net/bugs/1084192
Reverting this in the kernel as opposed to adding a sysctl
to the procps package guarentees that this regression will be
propagated to the Raring LTS kernel.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Andy Whitcroft [Fri, 3 Dec 2010 09:51:33 +0000 (09:51 +0000)]
UBUNTU: SAUCE: (no-up) add support for installed header files to ubuntu directory
BugLink: http://bugs.launchpad.net/bugs/684666
We need the aufs headers in the linux-libc-headers, add support for
including files from the ubuntu include directory.
Andy Whitcroft [Thu, 11 Mar 2010 10:33:36 +0000 (10:33 +0000)]
UBUNTU: SAUCE: (no-up) cdrom -- default to not locking the tray when in use
BugLink: http://bugs.launchpad.net/bugs/397734
It seems that users are have a high expectation that the eject button
on their CDROM drive will eject the disk regardless of whether it is in
use or not. To this end we are now changing the default LOCK mode for
mounted CDROMS to 0 to allow ejects. This however does not handle the
direct open cases like music and video players. From the launchpad bug
commentary:
So, according to the upstream discussion David Zeuthen recommended
to just not lock CD-ROM trays by default. Kernel/userspace already
handles prematurely removed USB storage devices reasonably, and with
read-only devices like CD-ROMs it is even less of an issue. So we
should just set /proc/sys/dev/cdrom/lock to 0 by default.
Note that we still will have the drive mounted after the eject. There is a
media change uevent generated and this will be used to trigger the unmount
of the drive in udisks. The burner software will also have to be looked
at to ensure they are explicitly locking the drive closed during the burn.
This will all be handled under the bug above.
Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Colin King <colin.king@canonical.com>
Linus Torvalds [Sun, 31 Oct 2021 18:24:06 +0000 (11:24 -0700)]
Merge tag 'perf-tools-fixes-for-v5.15-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix compilation of callchain related code on powerpc with gcc11+
- Fix PERF_SAMPLE_WEIGHT_STRUCT support in 'perf script'
- Check session->header.env.arch before using it, fixing a segmentation
fault
- Suppress 'rm dlfilter' build messages
* tag 'perf-tools-fixes-for-v5.15-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf script: Fix PERF_SAMPLE_WEIGHT_STRUCT support
perf callchain: Fix compilation on powerpc with gcc11+
perf script: Check session->header.env.arch before using it
perf build: Suppress 'rm dlfilter' build message
Linus Torvalds [Sun, 31 Oct 2021 18:19:02 +0000 (11:19 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Fixes for s390 interrupt delivery
- Fixes for Xen emulator bugs showing up as debug kernel WARNs
- Fix another issue with SEV/ES string I/O VMGEXITs
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Take srcu lock in post_kvm_run_save()
KVM: SEV-ES: fix another issue with string I/O VMGEXITs
KVM: x86/xen: Fix kvm_xen_has_interrupt() sleeping in kvm_vcpu_block()
KVM: x86: switch pvclock_gtod_sync_lock to a raw spinlock
KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpu
KVM: s390: clear kicked_mask before sleeping again
Kan Liang [Wed, 29 Sep 2021 15:38:13 +0000 (08:38 -0700)]
perf script: Fix PERF_SAMPLE_WEIGHT_STRUCT support
-F weight in perf script is broken.
# ./perf mem record
# ./perf script -F weight
Samples for 'dummy:HG' event do not have WEIGHT attribute set. Cannot
print 'weight' field.
The sample type, PERF_SAMPLE_WEIGHT_STRUCT, is an alternative of the
PERF_SAMPLE_WEIGHT sample type. They share the same space, weight. The
lower 32 bits are exactly the same for both sample type. The higher 32
bits may be different for different architecture. For a new kernel on
x86, the PERF_SAMPLE_WEIGHT_STRUCT is used. For an old kernel or other
ARCHs, the PERF_SAMPLE_WEIGHT is used.
With -F weight, current perf script will only check the input string
"weight" with the PERF_SAMPLE_WEIGHT sample type. Because the commit ea8d0ed6eae3 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") didn't
update the PERF_SAMPLE_WEIGHT_STRUCT sample type for perf script. For a
new kernel on x86, the check fails.
Use PERF_SAMPLE_WEIGHT_TYPE, which supports both sample types, to
replace PERF_SAMPLE_WEIGHT
Fixes: ea8d0ed6eae37b01 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") Reported-by: Joe Mario <jmario@redhat.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Joe Mario <jmario@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Joe Mario <jmario@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Link: https://lore.kernel.org/r/1632929894-102778-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 28 Sep 2021 19:52:53 +0000 (21:52 +0200)]
perf callchain: Fix compilation on powerpc with gcc11+
Got following build fail on powerpc:
CC arch/powerpc/util/skip-callchain-idx.o
In function ‘check_return_reg’,
inlined from ‘check_return_addr’ at arch/powerpc/util/skip-callchain-idx.c:213:7,
inlined from ‘arch_skip_callchain_idx’ at arch/powerpc/util/skip-callchain-idx.c:265:7:
arch/powerpc/util/skip-callchain-idx.c:54:18: error: ‘dwarf_frame_register’ accessing 96 bytes \
in a region of size 64 [-Werror=stringop-overflow=]
54 | result = dwarf_frame_register(frame, ra_regno, ops_mem, &ops, &nops);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/util/skip-callchain-idx.c: In function ‘arch_skip_callchain_idx’:
arch/powerpc/util/skip-callchain-idx.c:54:18: note: referencing argument 3 of type ‘Dwarf_Op *’
In file included from /usr/include/elfutils/libdwfl.h:32,
from arch/powerpc/util/skip-callchain-idx.c:10:
/usr/include/elfutils/libdw.h:1069:12: note: in a call to function ‘dwarf_frame_register’
1069 | extern int dwarf_frame_register (Dwarf_Frame *frame, int regno,
| ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The dwarf_frame_register args changed with [1],
Updating ops_mem accordingly.
Song Liu [Mon, 4 Oct 2021 05:32:38 +0000 (22:32 -0700)]
perf script: Check session->header.env.arch before using it
When perf.data is not written cleanly, we would like to process existing
data as much as possible (please see f_header.data.size == 0 condition
in perf_session__read_header). However, perf.data with partial data may
crash perf. Specifically, we see crash in 'perf script' for NULL
session->header.env.arch.
Fix this by checking session->header.env.arch before using it to determine
native_arch. Also split the if condition so it is easier to read.
Committer notes:
If it is a pipe, we already assume is a native arch, so no need to check
session->header.env.arch.
Adrian Hunter [Thu, 30 Sep 2021 06:28:49 +0000 (09:28 +0300)]
perf build: Suppress 'rm dlfilter' build message
The following build message:
rm dlfilters/dlfilter-test-api-v0.o
is unwanted.
The object file is being treated as an intermediate file and being
automatically removed. Mark the object file as .SECONDARY to prevent
removal and hence the message.
Linus Torvalds [Sat, 30 Oct 2021 22:56:38 +0000 (15:56 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers, and one sizeable update to the UFS
driver to remove the HPB 2.0 feature that has been objected to by Jens
and Christoph.
Although the UFS patch is large and last minute, it's essentially the
least intrusive way of resolving the objections in time for the 5.15
release"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufshpb: Remove HPB2.0 flows
scsi: mpt3sas: Fix reference tag handling for WRITE_INSERT
scsi: ufs: ufs-exynos: Correct timeout value setting registers
scsi: ibmvfc: Fix up duplicate response detection
Linus Torvalds [Sat, 30 Oct 2021 16:55:46 +0000 (09:55 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One fix for the composite clk that broke when we changed this clk type
to use the determine_rate instead of round_rate clk op by default.
This caused lots of problems on Rockchip SoCs because they heavily use
the composite clk code to model the clk tree"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: composite: Also consider .determine_rate for rate + mux composites
Linus Torvalds [Sat, 30 Oct 2021 16:28:24 +0000 (09:28 -0700)]
Merge tag 'riscv-for-linus-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"These are pretty late, but they do fix concrete issues.
- ensure the trap vector's address is aligned.
- avoid re-populating the KASAN shadow memory.
- allow kasan to build without warnings, which have recently become
errors"
* tag 'riscv-for-linus-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix asan-stack clang build
riscv: Do not re-populate shadow memory with kasan_populate_early_shadow
riscv: fix misalgned trap vector base address
Avri Altman [Sat, 30 Oct 2021 06:23:01 +0000 (09:23 +0300)]
scsi: ufs: ufshpb: Remove HPB2.0 flows
The Host Performance Buffer feature allows UFS read commands to carry the
physical media addresses along with the LBAs, thus allowing less internal
L2P-table switches in the device. HPB1.0 allowed a single LBA, while
HPB2.0 increases this capacity up to 255 blocks.
Carrying more than a single record, the read operation is no longer purely
of type "read" but a "hybrid" command: Writing the physical address to the
device in one operation and reading back the required payload in another.
The JEDEC HPB spec defines two commands for this operation:
HPB-WRITE-BUFFER (0x2) to write the physical addresses to device, and
HPB-READ to read the payload.
With the current HPB design the UFS driver has no alternative but to divide
the READ request into 2 separate commands: HPB-WRITE-BUFFER and HPB-READ.
This causes a great deal of aggravation to the block layer guys who
demanded that we completely revert the entire HPB driver regardless of the
huge amount of corporate effort already invested in it.
As a compromise, remove only the pieces that implement the 2.0
specification. This is done as a matter of urgency for the final 5.15
release.
Link: https://lore.kernel.org/r/20211030062301.248-1-avri.altman@wdc.com Tested-by: Avri Altman <avri.altman@wdc.com> Tested-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Co-developed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Linus Torvalds [Sat, 30 Oct 2021 00:35:56 +0000 (17:35 -0700)]
Merge tag 'powerpc-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Three commits fixing some issues introduced with the recent IOMMU
changes we merged.
Thanks to Alexey Kardashevskiy"
* tag 'powerpc-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: Create huge DMA window if no MMIO32 is present
powerpc/pseries/iommu: Check if the default window in use before removing it
powerpc/pseries/iommu: Use correct vfree for it_map
Linus Torvalds [Sat, 30 Oct 2021 00:04:38 +0000 (17:04 -0700)]
Merge tag 'gpio-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the return value check when parsing the ngpios property in
gpio-xgs-iproc
- check the return value of bgpio_init() in gpio-mlxbf2
* tag 'gpio-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf2.c: Add check for bgpio_init failure
gpio: xgs-iproc: fix parsing of ngpios property
Linus Torvalds [Fri, 29 Oct 2021 18:10:29 +0000 (11:10 -0700)]
Merge tag 'block-5.15-2021-10-29' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request:
- fix nvmet-tcp header digest verification (Amit Engel)
- fix a memory leak in nvmet-tcp when releasing a queue (Maurizio
Lombardi)
- fix nvme-tcp H2CData PDU send accounting again (Sagi Grimberg)
- fix digest pointer calculation in nvme-tcp and nvmet-tcp (Varun
Prakash)
- fix possible nvme-tcp req->offset corruption (Varun Prakash)
- Queue drain ordering fix (Ming)
- Partition check regression for zoned devices (Shin'ichiro)
- Zone queue restart fix (Naohiro)
* tag 'block-5.15-2021-10-29' of git://git.kernel.dk/linux-block:
block: Fix partition check for host-aware zoned block devices
nvmet-tcp: fix header digest verification
nvmet-tcp: fix data digest pointer calculation
nvme-tcp: fix data digest pointer calculation
nvme-tcp: fix possible req->offset corruption
block: schedule queue restart after BLK_STS_ZONE_RESOURCE
block: drain queue after disk is removed from sysfs
nvme-tcp: fix H2CData PDU send accounting (again)
nvmet-tcp: fix a memory leak when releasing a queue
scsi: mpt3sas: Fix reference tag handling for WRITE_INSERT
Testing revealed a problem with how the reference tag was handled for
a WRITE_INSERT operation. The SCSI_PROT_REF_CHECK flag is not set when
the controller is asked to generate the protection information
(i.e. not DIX). And as a result the initial reference tag would not be
set in the WRITE_INSERT case.
Separate handling of the REF_CHECK and REF_INCREMENT flags to align
with both the DIX spec and the MPI implementation.
Linus Torvalds [Fri, 29 Oct 2021 17:54:44 +0000 (10:54 -0700)]
Merge tag 'mmc-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- tmio: Re-enable card irqs after a reset
- mtk-sd: Fixup probing of cqhci for crypto
- cqhci: Fix support for suspend/resume
- vub300: Fix control-message timeouts
- dw_mmc-exynos: Fix support for tuning
- winbond: Silences build errors on M68K
- sdhci-esdhc-imx: Fix support for tuning
- sdhci-pci: Read card detect from ACPI for Intel Merrifield
- sdhci: Fix eMMC support for Thundercomm TurboX CM2290
* tag 'mmc-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: tmio: reenable card irqs after the reset callback
mmc: mediatek: Move cqhci init behind ungate clock
mmc: cqhci: clear HALT state after CQE enable
mmc: vub300: fix control-message timeouts
mmc: dw_mmc: exynos: fix the finding clock sample value
mmc: winbond: don't build on M68K
mmc: sdhci-esdhc-imx: clear the buffer_read_ready to reset standard tuning circuit
mmc: sdhci-pci: Read card detect from ACPI for Intel Merrifield
mmc: sdhci: Map more voltage level to SDHCI_POWER_330
Linus Torvalds [Fri, 29 Oct 2021 17:46:59 +0000 (10:46 -0700)]
Merge tag 'for-5.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Last minute fixes for crash on 32bit architectures when compression is
in use. It's a regression introduced in 5.15-rc and I'd really like
not let this into the final release, fixes via stable trees would add
unnecessary delay.
The problem is on 32bit architectures with highmem enabled, the pages
for compression may need to be kmapped, while the patches removed that
as we don't use GFP_HIGHMEM allocations anymore. The pages that don't
come from local allocation still may be from highmem. Despite being on
32bit there's enough such ARM machines in use so it's not a marginal
issue.
I did full reverts of the patches one by one instead of a huge one.
There's one exception for the "lzo" revert as there was an
intermediate patch touching the same code to make it compatible with
subpage. I can't revert that one too, so the revert in lzo.c is
manual. Qu Wenruo has worked on that with me and verified the changes"
* tag 'for-5.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: compression: drop kmap/kunmap from lzo"
Revert "btrfs: compression: drop kmap/kunmap from zlib"
Revert "btrfs: compression: drop kmap/kunmap from zstd"
Revert "btrfs: compression: drop kmap/kunmap from generic helpers"
Linus Torvalds [Fri, 29 Oct 2021 17:41:07 +0000 (10:41 -0700)]
Merge tag 'trace-v5.15-rc6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing comment fixes from Steven Rostedt:
- Some bots have informed me that some of the ftrace functions
kernel-doc has formatting issues.
- Also, fix my snake instinct.
* tag 'trace-v5.15-rc6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix misspelling of "missing"
ftrace: Fix kernel-doc formatting issues
Linus Torvalds [Fri, 29 Oct 2021 17:03:07 +0000 (10:03 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"11 patches.
Subsystems affected by this patch series: mm (memcg, memory-failure,
oom-kill, secretmem, vmalloc, hugetlb, damon, and tools), and ocfs2"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
tools/testing/selftests/vm/split_huge_page_test.c: fix application of sizeof to pointer
mm/damon/core-test: fix wrong expectations for 'damon_split_regions_of()'
mm: khugepaged: skip huge page collapse for special files
mm, thp: bail out early in collapse_file for writeback page
mm/vmalloc: fix numa spreading for large hash tables
mm/secretmem: avoid letting secretmem_users drop to zero
ocfs2: fix race between searching chunks and release journal_head from buffer_head
mm/oom_kill.c: prevent a race between process_mrelease and exit_mmap
mm: filemap: check if THP has hwpoisoned subpage for PMD page fault
mm: hwpoison: remove the unnecessary THP check
memcg: page_alloc: skip bulk allocator for __GFP_ACCOUNT
Alexandre Ghiti [Fri, 29 Oct 2021 04:59:27 +0000 (06:59 +0200)]
riscv: Fix asan-stack clang build
Nathan reported that because KASAN_SHADOW_OFFSET was not defined in
Kconfig, it prevents asan-stack from getting disabled with clang even
when CONFIG_KASAN_STACK is disabled: fix this by defining the
corresponding config.
Alexandre Ghiti [Fri, 29 Oct 2021 04:59:26 +0000 (06:59 +0200)]
riscv: Do not re-populate shadow memory with kasan_populate_early_shadow
When calling this function, all the shadow memory is already populated
with kasan_early_shadow_pte which has PAGE_KERNEL protection.
kasan_populate_early_shadow write-protects the mapping of the range
of addresses passed in argument in zero_pte_populate, which actually
write-protects all the shadow memory mapping since kasan_early_shadow_pte
is used for all the shadow memory at this point. And then when using
memblock API to populate the shadow memory, the first write access to the
kernel stack triggers a trap. This becomes visible with the next commit
that contains a fix for asan-stack.
We already manually populate all the shadow memory in kasan_early_init
and we write-protect kasan_early_shadow_pte at the end of kasan_init
which makes the calls to kasan_populate_early_shadow superfluous so
we can remove them.
The kmaps in compression code are still needed and cause crashes on
32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004
with enabled LZO or ZSTD compression.
The revert does not apply cleanly due to changes in a6e66e6f8c1b
("btrfs: rework lzo_decompress_bio() to make it subpage compatible")
that reworked the page iteration so the revert is done to be equivalent
to the original code.
The kmaps in compression code are still needed and cause crashes on
32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004
with enabled LZO or ZSTD compression.