Leo Yan [Tue, 11 Dec 2018 07:38:22 +0000 (15:38 +0800)]
perf cs-etm: Avoid stale branch samples when flush packet
At the end of trace buffer handling, function cs_etm__flush() is invoked
to flush any remaining branch stack entries. As a side effect, it also
generates branch sample, because the 'etmq->packet' doesn't contains any
new coming packet but point to one stale packet after packets swapping,
so it wrongly makes synthesize branch samples with stale packet info.
We could review below detailed flow which causes issue:
Packet1 and packet2 are two continuous packets, when packet2 is the new
coming packet, cs_etm__sample() generates branch sample for these two
packets and use [packet1::end_addr - 4 => packet2::start_addr] as branch
jump flow, thus we can see the first generated branch sample in step 1.
At the end of cs_etm__sample() it swaps packets so 'etm->prev_packet'=
packet2 and 'etm->packet'=packet1, so far it's okay for branch sample.
If packet2 is the last one packet in trace buffer, even there have no
any new coming packet, cs_etm__run_decoder() invokes cs_etm__flush() to
flush branch stack entries as expected, but it also generates branch
samples by taking 'etm->packet' as a new coming packet, thus the branch
jump flow is as [packet2::end_addr - 4 => packet1::start_addr]; this
is the second sample which is generated in step 2. So actually the
second sample is a stale sample and we should not generate it.
This patch introduces a new function cs_etm__end_block(), at the end of
trace block this function is invoked to only flush branch stack entries
and thus can avoid to generate branch sample for stale packet.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Walker <robert.walker@arm.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1544513908-16805-3-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Tue, 11 Dec 2018 07:38:21 +0000 (15:38 +0800)]
perf cs-etm: Correct packets swapping in cs_etm__flush()
The structure cs_etm_queue uses 'prev_packet' to point to previous
packet, this can be used to combine with new coming packet to generate
samples.
In function cs_etm__flush() it swaps packets only when the flag
'etm->synth_opts.last_branch' is true, this means that it will not swap
packets if without option '--itrace=il' to generate last branch entries;
thus for this case the 'prev_packet' doesn't point to the correct
previous packet and the stale packet still will be used to generate
sequential sample. Thus if dump trace with 'perf script' command we can
see the incorrect flow with the stale packet's address info.
This patch corrects packets swapping in cs_etm__flush(); except using
the flag 'etm->synth_opts.last_branch' it also checks the another flag
'etm->sample_branches', if any flag is true then it swaps packets so can
save correct content to 'prev_packet'. Finally this can fix the wrong
program flow dumping issue.
The patch has a minor refactoring to use 'etm->synth_opts.last_branch'
instead of 'etmq->etm->synth_opts.last_branch' for condition checking,
this is consistent with that is done in cs_etm__sample().
Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Walker <robert.walker@arm.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1544513908-16805-2-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Switch to using a struct for the aumented_raw_syscalls syscalls map values
We'll start adding more perf-syscall stuff, so lets do this prep step so
that the next ones are just about adding more fields.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-vac4sn1ns1vj4y07lzj7y4b8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf bpf: Move perf_event_output() from stdio.h to bpf.h
So that we don't always carry that __bpf_output__ map, leaving that to
the scripts wanting to use that facility.
'perf trace' will be changed to look if that map is present and only
setup the bpf-output events if so.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-azwys8irxqx9053vpajr0k5h@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
What is it that this gsd-housekeeping thingy needs to open
/proc/self/mountinfo four times periodically? :-)
This map will be extended to tell per-syscall parameters, i.e. how many
bytes to copy per arg, using the function signature to get the types and
then the size of those types, via BTF.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-cy222g9ucvnym3raqvxp0hpg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Avoid using raw_syscalls in duplicity with eBPF augmentation
So when we do something like:
# perf trace -e open*,augmented_raw_syscalls.o
We need to set trace->trace_syscalls because there is logic that use
that when mixing strace-like output with other events, such as scheduler
tracepoints, but with that set we ended up having multiple
raw_syscalls:sys_{enter,exit} setup, which garbled the output, so
check if trace->augmented_raw_syscalls is set and avoid the two extra
tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-kjmnbrlgu0c38co1ye8egbsb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Rename set_ev_qualifier_filter to clarify its a tracepoint filter
Rename it to trace__set_ev_qualifier_tp_filter(), as this just sets up
tracepoint filters on the raw_syscalls:sys_{enter,exit} tracepoints, and
since we're going to do the same for the augmented_raw_syscalls
codepath, when used, rename it to clarify.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-8bjsul8x7osw7nxjodnyfn14@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 12 Dec 2018 13:29:40 +0000 (14:29 +0100)]
perf tools: Link libperf-jvmti.so with LDFLAGS variable
So we could propagate distro flags into libperf-jvmti.so library.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181212132940.840-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools: Cast off_t to s64 to avoid warning on bionic libc
To avoid this warning:
CC /tmp/build/perf/util/s390-cpumsf.o
util/s390-cpumsf.c: In function 's390_cpumsf_samples':
util/s390-cpumsf.c:508:3: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'off_t' [-Wformat=]
pr_err("[%#08" PRIx64 "] Invalid AUX trailer entry TOD clock base\n",
^
Now the various Android cross toolchains used in the perf tools
container test builds are all clean and we can remove this:
export EXTRA_MAKE_ARGS="WERROR=0"
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lkml.kernel.org/n/tip-5rav4ccyb0sjciysz2i4p3sx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools: Add missing open_memstream() prototype for systems lacking it
There are systems such as the Android NDK API level 24 has the
open_memstream() function but doesn't provide a prototype, adding noise
to the build:
builtin-timechart.c: In function 'cat_backtrace':
builtin-timechart.c:486:2: warning: implicit declaration of function 'open_memstream' [-Wimplicit-function-declaration]
FILE *f = open_memstream(&p, &p_len);
^
builtin-timechart.c:486:2: warning: nested extern declaration of 'open_memstream' [-Wnested-externs]
builtin-timechart.c:486:12: warning: initialization makes pointer from integer without a cast
FILE *f = open_memstream(&p, &p_len);
^
Define a LACKS_OPEN_MEMSTREAM_PROTOTYPE define so that code needing that
can get a prototype.
Checked in the bionic git repo to be available since level 23:
Reducing this noise when cross building to the Android NDK:
util/header.c: In function 'perf_header__fprintf_info':
util/header.c:2710:45: warning: pointer targets in passing argument 1 of 'ctime' differ in signedness [-Wpointer-sign]
fprintf(fp, "# captured on : %s", ctime(&st.st_ctime));
^
In file included from util/../perf.h:5:0,
from util/evlist.h:11,
from util/header.c:22:
/opt/android-ndk-r15c/platforms/android-26/arch-arm/usr/include/time.h:81:14: note: expected 'const time_t *' but argument is of type 'long unsigned int *'
extern char* ctime(const time_t*) __LIBC_ABI_PUBLIC__;
^
perf tools: Add missing sigqueue() prototype for systems lacking it
There are systems such as the Android NDK API level 24 has the
sigqueue() function but doesn't provide a prototype, adding noise to the
build:
util/evlist.c: In function 'perf_evlist__prepare_workload':
util/evlist.c:1494:4: warning: implicit declaration of function 'sigqueue' [-Wimplicit-function-declaration]
if (sigqueue(getppid(), SIGUSR1, val))
^
util/evlist.c:1494:4: warning: nested extern declaration of 'sigqueue' [-Wnested-externs]
Define a LACKS_SIGQUEUE_PROTOTYPE define so that code needing that can
get a prototype.
Checked in the bionic git repo to be available since level 23:
tools lib subcmd: Don't add the kernel sources to the include path
At some point we decided not to directly include kernel sources files
when building tools/perf/, but when tools/lib/subcmd/ was forked from
tools/perf it somehow ended up adding it via these two lines in its
Makefile:
This fixes the build when building from the sources in environments such
as the Android NDK crossbuilding from a fedora:26 system:
subcmd-util.h:11:15: error: expected ',' or ';' before 'void'
static inline void report(const char *prefix, const char *err, va_list params)
^
In file included from /git/perf/include/uapi/linux/stddef.h:2:0,
from /git/perf/include/uapi/linux/posix_types.h:5,
from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h:36,
from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/unistd.h:33,
from run-command.c:2:
subcmd-util.h:18:17: error: '__no_instrument_function__' attribute applies only to functions
The /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h
file that includes linux/posix_types.h ends up getting the one in the kernel
sources causing the breakage. Fix it.
Test built tools/objtool/ too.
Reported-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 4b6ab94eabe4 ("perf subcmd: Create subcmd library") Link: https://lkml.kernel.org/n/tip-5lhaoecrj12t0bqwvpiu14sm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Allow selecting use the use of the ordered_events code
I was trigger happy on this one, as using ordered_events as implemented
by Jiri for use with the --block code under discussion on lkml incurs
in delaying processing to form batches that then get ordered and then
printed.
With 'perf trace' we want to process the events as they go, without that
delay, and doing it that way works well for the common case which is to
trace a thread or a workload started by 'perf trace'.
So revert back to not using ordered_events but add an option to select
that mode so that users can experiment with their particular use case to
see if works better, i.e. if the added delay is not a problem and the
ordering helps.
tools lib traceevent: Fix processing of dereferenced args in bprintk events
In the case that a bprintk event has a dereferenced pointer that is
stored as a string, and there's more values to process (more args), the
arg was not updated to point to the next arg after processing the
dereferenced pointer, and it screwed up what was to be displayed.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 37db96bb49629 ("tools lib traceevent: Handle new pointer processing of bprint strings") Link: http://lkml.kernel.org/r/20181210134522.3f71e2ca@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Petlan [Mon, 10 Dec 2018 16:00:04 +0000 (11:00 -0500)]
perf stat: Avoid segfaults caused by negated options
Some 'perf stat' options do not make sense to be negated (event,
cgroup), some do not have negated path implemented (metrics). Due to
that, it is better to disable the "no-" prefix for them, since
otherwise, the later opt-parsing segfaults.
Before:
$ perf stat --no-metrics -- ls
Segmentation fault (core dumped)
After:
$ perf stat --no-metrics -- ls
Error: option `no-metrics' isn't available
Usage: perf stat [<options>] [<command>]
Signed-off-by: Michael Petlan <mpetlan@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 1485912065.62416880.1544457604340.JavaMail.zimbra@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Petlan [Wed, 21 Nov 2018 21:39:18 +0000 (16:39 -0500)]
perf tests: Use shebangs in the shell scripts
Since the first line was used as a test identification, it needs to be
skipped by shell_test__description() function now.
Further notes from Hendrik:
It might be worth to note that adding the shebang is necessary to spot
them as scripts.
Using /bin/sh looks fine to. Just briefly checked whether the scripts
contains some bash-specifics, which is not the case.
Signed-off-by: Michael Petlan <mpetlan@redhat.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 2127419430.57657104.1542836358464.JavaMail.zimbra@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 27 Nov 2018 08:46:34 +0000 (10:46 +0200)]
perf auxtrace: Alter addr_filter__entire_dso() to work if there are no symbols
addr_filter__entire_dso() uses the first and last symbols from a dso,
and so does not work when there are no symbols. Alter it to filter the
whole file instead.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: 1b36c03e3569 ("perf record: Add support for using symbols in address filters") Link: http://lkml.kernel.org/r/20181127084634.12469-1-adrian.hunter@intel.com
[ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Tue, 18 Dec 2018 13:39:00 +0000 (14:39 +0100)]
Merge tag 'perf-core-for-mingo-4.21-20181217' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Introduce 'perf record --aio' to use asynchronous IO trace writing, disabled
by default (Alexey Budankov)
- Add fallback routines to be used in places where we don't have the CPU mode
(kernel/userspace/hypervisor) and thus must first fallback lookups looking
at all map trees when trying to resolve symbols (Adrian Hunter)
- Fix error with config term "pt=0", where we should just force "pt=1" and
warn the user about the former being nonsensical (Adrian Hunter)
- Fix 'perf test' entry where we expect 'sleep' to come in a PERF_RECORD_COMM
but instead we get 'coreutils' when sleep is provided by some versions of
the 'coreutils' package (Adrian Hunter)
- Introduce 'perf top --kallsyms file' to match 'perf report --kallsyms', useful
when dealing with BPF, where symbol resolution happens via kallsyms, not via
the default vmlinux ELF symtabs (Arnaldo Carvalho de Melo)
- Support 'srccode' output field in 'perf script' (Andi Kleen)
- Introduce basic 'perf annotation' support for the ARC architecture (Eugeniy Paltsev)
- Compute and display average IPC and IPC coverage per symbol in 'perf annotate' and
'perf report' (Jin Yao)
- Make 'perf top' use ordered_events and process histograms in a separate thread (Jiri Olsa)
- Make 'perf trace' use ordered_events (Jiri Olsa)
- Add support for ETMv3 and PTMv1.1 decoding in cs-etm (Mathieu Poirier)
- Support for ARM A32/T32 instruction sets in CoreSight trace (cs-etm) (Robert Walker)
- strncpy() fixes triggered by new warnings on gcc 8.2.0 (Arnaldo Carvalho de Melo)
- Handle tracefs syscall tracepoint older 'nr' field in 'perf trace', that got
renamed to '__syscall_nr' to work in older kernels (Arnaldo Carvalho de Melo)
- Give better hint about devel package for libssl (Arnaldo Carvalho de Melo)
- Fix the 'perf trace' build in architectures lacking explicit mmap.h file (Arnaldo Carvalho de Melo)
- Remove extra rb_tree traversal indirection from map__find() (Eric Saint-Etienne)
- Disable breakpoint tests for 32-bit ARM (Florian Fainelli)
- Fix typos all over the place, mostly in comments, but also in some debug
messages and JSON files (Ingo Molnar)
- Allow specifying proc-map-timeout in config file (Mark Drayton)
Add OE_FLUSH__TIME flush type, to be able to flush only certain amount
of the queue based on the provided timestamp. It will be used in the
following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dmitry Levin <ldv@altlinux.org> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Luis Cláudio Gonçalves <lclaudio@uudg.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181205160509.1168-7-jolsa@kernel.org
[ Fix the build on older systems such as centos 5 and 6 where 'time' shadows a global declaration ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sihyeon Jang [Sat, 1 Dec 2018 15:46:03 +0000 (00:46 +0900)]
perf config: Modify size factor of snprintf
According to definition of snprintf, it gets size factor including
null('\0') byte. So '-1' is not neccessary. Also it will be helpful
unfied style with other cases. (eg. builtin-script.c)
Alexey Budankov [Wed, 5 Dec 2018 17:19:41 +0000 (20:19 +0300)]
perf record: Fix memory leak on AIO objects deallocation
Sending a part which was missed between v12 and v13 of the patch set
introducing AIO trace streaming for perf record mode.
The part is essential to avoid memory leakage during deallocation of AIO
related trace data buffers.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/e5d3154e-1583-83bb-9527-28ddbc6dbf9d@linux.intel.com
[ No need to test for NULL before calling zfree() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf parse-events: Fix unchecked usage of strncpy()
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/parse-events.c: In function 'print_symbol_events':
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'print_symbol_events.constprop',
inlined from 'print_events' at util/parse-events.c:2508:2:
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'print_symbol_events.constprop',
inlined from 'print_events' at util/parse-events.c:2511:2:
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 947b4ad1d198 ("perf list: Fix max event string size") Link: https://lkml.kernel.org/n/tip-b663e33bm6x8hrkie4uxh7u2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
In this case the 'target' buffer is coming from a list of build-ids that
are expected to have a len of at most (SBUILD_ID_SIZE - 1) chars, so
probably we're safe, but since we're using strncpy() here, use strlcpy()
instead to provide the intended safety checking without the using the
problematic strncpy() function.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/probe-file.c: In function 'probe_cache__open.isra.5':
util/probe-file.c:427:3: error: 'strncpy' specified bound 41 equals destination size [-Werror=stringop-truncation]
strncpy(sbuildid, target, SBUILD_ID_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 1f3736c9c833 ("perf probe: Show all cached probes") Link: https://lkml.kernel.org/n/tip-l7n8ggc9kl38qtdlouke5yp5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf ui helpline: Use strlcpy() as a shorter form of strncpy() + explicit set nul
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
In this case we are actually setting the null byte at the right place,
but since we pass the buffer size as the limit to strncpy() and not
it minus one, gcc ends up warning us about that, see below. So, lets
just switch to the shorter form provided by strlcpy().
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
ui/tui/helpline.c: In function 'tui_helpline__push':
ui/tui/helpline.c:27:2: error: 'strncpy' specified bound 512 equals destination size [-Werror=stringop-truncation]
strncpy(ui_helpline__current, msg, sz)[sz - 1] = '\0';
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: e6e904687949 ("perf ui: Introduce struct ui_helpline") Link: https://lkml.kernel.org/n/tip-d1wz0hjjsh19xbalw69qpytj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
In this specific case this would only happen if fgets() was buggy, as
its man page states that it should read one less byte than the size of
the destination buffer, so that it can put the nul byte at the end of
it, so it would never copy 255 non-nul chars, as fgets reads into the
orig buffer at most 254 non-nul chars and terminates it. But lets just
switch to strlcpy to keep the original intent and silence the gcc 8.2
warning.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
In function 'cpu_model',
inlined from 'svg_cpu_box' at util/svghelper.c:378:2:
util/svghelper.c:337:5: error: 'strncpy' output may be truncated copying 255 bytes from a string of length 255 [-Werror=stringop-truncation]
strncpy(cpu_m, &buf[13], 255);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Fixes: f48d55ce7871 ("perf: Add a SVG helper library file") Link: https://lkml.kernel.org/n/tip-xzkoo0gyr56gej39ltivuh9g@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we make sure the destination buffer has at least strlen(orig) + 1,
no need to do a strncpy(dest, orig, strlen(orig)), just use strcpy(dest,
orig).
This silences this gcc 8.2 warning on Alpine Linux:
In function 'add_man_viewer',
inlined from 'perf_help_config' at builtin-help.c:284:3:
builtin-help.c:192:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
strncpy((*p)->name, name, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
builtin-help.c: In function 'perf_help_config':
builtin-help.c:187:15: note: length computed here
size_t len = strlen(name);
^~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 078006012401 ("perf_counter tools: add in basic glue from Git") Link: https://lkml.kernel.org/n/tip-2f69l7drca427ob4km8i7kvo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/header.c: In function 'perf_event__synthesize_event_update_name':
util/header.c:3625:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
strncpy(ev->data, evsel->name, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/header.c:3618:15: note: length computed here
size_t len = strlen(evsel->name);
^~~~~~~~~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: a6e5281780d1 ("perf tools: Add event_update event unit type") Link: https://lkml.kernel.org/n/tip-wycz66iy8dl2z3yifgqf894p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/header.c: In function 'perf_event__synthesize_event_update_unit':
util/header.c:3586:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
strncpy(ev->data, evsel->unit, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/header.c:3579:16: note: length computed here
size_t size = strlen(evsel->unit);
^~~~~~~~~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: a6e5281780d1 ("perf tools: Add event_update event unit type") Link: https://lkml.kernel.org/n/tip-fiikh5nay70bv4zskw2aa858@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
In function 'decompress_kmodule',
inlined from 'dso__decompress_kmodule_fd' at util/dso.c:305:9:
util/dso.c:298:3: error: 'strncpy' destination unchanged after copying no bytes [-Werror=stringop-truncation]
strncpy(pathname, tmpbuf, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC /tmp/build/perf/util/values.o
CC /tmp/build/perf/util/debug.o
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: c9a8a6131fb6 ("perf tools: Move the temp file processing into decompress_kmodule") Link: https://lkml.kernel.org/n/tip-tl2hdxj64tt4k8btbi6a0ugw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mathieu Poirier [Tue, 4 Dec 2018 20:39:04 +0000 (13:39 -0700)]
perf cs-etm: Add support for PTMv1.1 decoding
This patch is re-using the mechanic set forth by ETMv3 to add support
for PTM decoding. Configuration for both encoding protocol is similar
but the generated stream itself is very different, hence requiring
special handling.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1543955944-10042-4-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mathieu Poirier [Tue, 4 Dec 2018 20:39:03 +0000 (13:39 -0700)]
perf cs-etm: Add support for ETMv3 trace decoding
Add support for the creation of packet printer and decoder for the ETMv3
trace architecture. That way traces generated by tracers adhering to
that trace protocol can be handled properly by the perf infrastructure.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1543955944-10042-3-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mathieu Poirier [Tue, 4 Dec 2018 20:39:02 +0000 (13:39 -0700)]
perf cs-etm: Add configuration for ETMv3 trace protocol
This patch deals with the proper initialisation of configuration
parameters for the ETMv3 trace protocol in order to properly handle
packets generated by tracers following this specification.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1543955944-10042-2-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 13 Nov 2018 10:15:34 +0000 (11:15 +0100)]
perf top: Move perf_top__reset_sample_counters() to after counts display
Move the perf_top__reset_sample_counters() call to right after we
display the counters so we can see the updated numbers for longer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-o72pyiwt05f3p2juprwmz2jo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 19 Nov 2018 10:12:01 +0000 (11:12 +0100)]
perf top: Display slow reader warning when droping samples
Currently we display the "Too slow to read ring buffer.." helpline only
in the slow reader thread. This patch triggers it also when the
processing thread drops samples, because it has the same reason, which
is too many data on input.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-bnev2mloavyurmgchcr3o24o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
# perf top
Samples: 0 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 0 lost: 0/0 drop: 0/0
The format is: <current period drop>/<total drop>
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-2lj87zz8tq9ye1ntax3ulw0n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 11 Nov 2018 18:52:06 +0000 (19:52 +0100)]
perf top: Drop samples which are behind the refresh rate
Drop samples from processing thread if they get behind the latest event
read from the kernel maps. If it gets behind more than the refresh rate
(-d option), drop the sample.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-x533ra5c1pgofvbtsizzuydd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 7 Nov 2018 19:11:19 +0000 (20:11 +0100)]
perf top: Set the 'session_done' volatile variable when exiting
So we can get out of hist processing ASAP on user request.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-r8aufbgbixr2f85s3wcoaw9v@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 5 Nov 2018 20:23:40 +0000 (21:23 +0100)]
perf top: Use cond variable instead of a lock
Use conditional variable logic to synchronize between the reading and
processing threads. Currently it's done by having mutex around rotation
code.
Using a POSIX cond variable to sync both threads after queues rotation:
Process thread:
- Detects data
- Switches queues
- Sets rotate variable
- Waits in pthread_cond_wait()
Read thread:
- Detects rotate is set
- Kicks the process thread with a pthread_cond_signal()
After this rotation is safely completed and both threads can continue
with the new queue.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-3rdeg23rv3brvy1pwt3igvyw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 5 Nov 2018 12:24:55 +0000 (13:24 +0100)]
perf top: Add processing thread
Add a new thread that takes care of the hist creating to alleviate the
main reader thread so it can keep perf mmaps served in time so that we
reduce the possibility of losing events.
The 'perf top' command now spawns 2 extra threads, the data processing
is the following:
1) The main thread reads the data from mmaps and queues them to
ordered events object;
2) The processing threads takes the data from the ordered events
object and create initial histogram;
3) The GUI thread periodically sorts the initial histogram and
presents it.
Passing the data between threads 1 and 2 is done by having 2 ordered
events queues. One is always being stored by thread 1 while the other is
flushed out in thread 2.
Passing the data between threads 2 and 3 stays the same as was initially
for threads 1 and 3.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-hhf4hllgkmle9wl1aly1jli0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 5 Nov 2018 20:34:47 +0000 (21:34 +0100)]
perf top: Move lost events warning to helpline
We can't display the UI box saying that we are slow in the reader
thread. That will make 'perf top' even slower and the user even more
angry ;-)
Move the UI box message from the reader thread to the UI thread and
change it to a helpline, so there's no need to 'press any key'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-x4k0iuw7tt6mywsaguq6jfwu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
# perf top
Samples: 0 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 0 lost: 0/0
The format is: <current period lost>/<total lost>
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-zo11rn270gij5jtp8fknpf8u@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 7 Nov 2018 15:58:36 +0000 (16:58 +0100)]
perf ordered_events: Add private data member
We will need it in following patch, where we can't use the
container_of() trick to get the higher level object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-vgs9aoek21v14o3obza586yy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 7 Nov 2018 15:46:47 +0000 (16:46 +0100)]
perf ordered_events: Rework show_progress for __ordered_events__flush
Decide to use the progress bar one level higher, we will need this in
following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-ocjdukp2a8ujikkmafd0j5zv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Tue, 4 Dec 2018 00:18:48 +0000 (16:18 -0800)]
perf tools: Support 'srccode' output
When looking at PT or brstackinsn traces with 'perf script' it can be
very useful to see the source code. This adds a simple facility to print
them with 'perf script', if the information is available through dwarf
% perf record ...
% perf script -F insn,ip,sym,srccode
...
4004c6 main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004c6 main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004b3 main
6 v++;
% perf record -b ...
% perf script -F insn,ip,sym,srccode,brstackinsn
Not supported for callchains currently, would need some layout changes
there.
Committer notes:
Fixed the build on Alpine Linux (3.4 .. 3.8) by addressing this
warning:
In file included from util/srccode.c:19:0:
/usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
#warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
^~~~~~~
cc1: all warnings being treated as errors
perf trace: We need to consider "nr" if "__syscall_nr" is not there
To cope with older kernels that don't have this patch backported:
026842d148b9 ("tracing/syscalls: Rename "/format" tracepoint field name "nr" to "__syscall_nr:")
This makes 'perf trace' work again in RHEL7 kernels.
Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-6h1syw2isegnhb1bjmtr9x9k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mark Drayton [Tue, 4 Dec 2018 20:34:20 +0000 (12:34 -0800)]
perf tools: Allow specifying proc-map-timeout in config file
The default timeout of 500ms for parsing /proc/<pid>/maps files is too
short for profiling many of our services.
This can be overridden by passing --proc-map-timeout to the relevant
command but it'd be nice to globally increase our default value.
This patch permits setting a different default with the
core.proc-map-timeout config file parameter.
Signed-off-by: Mark Drayton <mbd@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181204203420.1683114-1-mbd@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 3 Dec 2018 10:22:00 +0000 (11:22 +0100)]
tools lib subcmd: Fix a few source code comment typos
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease
cherry-picking and/or backporting, split this into multiple patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 3 Dec 2018 10:22:00 +0000 (11:22 +0100)]
perf tools: Fix diverse comment typos
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease
cherry-picking and/or backporting, split this into multiple patches.
Just typos in comments, no need to backport, reducing the possibility of
possible backporting artifacts.
Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 3 Dec 2018 10:22:00 +0000 (11:22 +0100)]
perf bpf-loader: Fix debugging message typo
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease cherry
picking and/or backporting, split this into multiple patches.
This one has information that is presented to the user, albeit in debug
mode.
Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 3 Dec 2018 10:22:00 +0000 (11:22 +0100)]
perf tools Documentation: Fix diverse typos
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease cherry
picking and/or backporting, split this into multiple patches.
In this particular case, it affects documentation, so may be interesting
to cherry pick as it is information that is presented to the user.
Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 3 Dec 2018 10:22:00 +0000 (11:22 +0100)]
tools lib traceevent: Fix diverse typos in comments
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease cherry
picking and/or backporting, split this into multiple patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 3 Dec 2018 10:22:00 +0000 (11:22 +0100)]
perf vendor events intel: Fix diverse typos
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
( Care should be taken not to re-import these typos in the future,
if the JSON files get updated by the vendor without fixing the typos. )
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease cherry
picking and/or backporting, split this into multiple patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The breakpoint tests on the ARM 32-bit kernel are broken in several
ways.
The breakpoint length requested does not necessarily match whether the
function address has the Thumb bit (bit 0) set or not, and this does
matter to the ARM kernel hw_breakpoint infrastructure. See [1] for
background.
[1]: https://lkml.org/lkml/2018/11/15/205
As Will indicated, the overflow handling would require single-stepping
which is not supported at the moment. Just disable those tests for the
ARM 32-bit platforms and update the comment above to explain these
limitations.
Co-developed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181203191138.2419-1-f.fainelli@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Robert Walker [Mon, 3 Dec 2018 12:18:46 +0000 (12:18 +0000)]
perf cs-etm: Support for ARM A32/T32 instruction sets in CoreSight trace
This patch adds support for generating instruction samples from trace of
AArch32 programs using the A32 and T32 instruction sets.
T32 has variable 2 or 4 byte instruction size, so the conversion between
addresses and instruction counts requires extra information from the
trace decoder, requiring version 0.10.0 of OpenCSD. A check for the
OpenCSD library version has been added to the feature check for OpenCSD.
Signed-off-by: Robert Walker <robert.walker@arm.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1543839526-30348-1-git-send-email-robert.walker@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sihyeon Jang <uneedsihyeon@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: aca70cc40a0b ("perf beauty mmap_flags: Check if the arch has a mmap.h file") Link: http://lkml.kernel.org/r/20181202080651.4685-1-uneedsihyeon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, its API should be
straightforward. This patch hides few API functions, intended for
internal usage only:
tep_free_event(), tep_free_format_field(), __tep_data2host2(),
__tep_data2host4() and __tep_data2host8().
The patch also alignes the libtraceevent summary man page with
these API changes.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181130154647.891651290@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools: traceevent API cleanup, remove __tep_data2host*()
In order to make libtraceevent into a proper library, its API should be
straightforward. The __tep_data2host*() functions are going to no longer
be available as a libtraceevent API, tep_read_number() should be used
instead. This patch replaces __tep_data2host*() usage with
tep_read_number() in perf.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181130154647.743979275@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools lib traceevent: Rename tep_free_format() to tep_free_event()
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. This renames tep_free_format() to tep_free_event(), which
describes more closely the purpose of the function.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181130154647.591673556@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts.
This renames 'struct tep_event_format' to 'struct tep_event', which
describes more closely the purpose of the struct.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181130154647.436403995@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[ Fixup conflict with 6e33c250a88f ("tools lib traceevent: Fix compile warnings in tools/lib/traceevent/event-parse.c") ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools lib traceevent: Added support for pkg-config
This patch implements integration with pkg-config framework. pkg-config
can be used by the library users to determine required CFLAGS and
LDFLAGS in order to use the library
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181130154647.022471992@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools lib traceevent: Implement new API tep_get_ref()
This patch implements a new API of the tracevent library:
int tep_get_ref(struct tep_handle *tep);
The API returns the reference counter "ref_count" of the tep handler.
As "struct tep_handle" is internal only, its members cannot be accessed
by the library users, the API is used to get the reference counter.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181130154646.890615385@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The columns "IPC" and "[IPC Coverage]" are automatically enabled when
the sort-key "symbol" is specified. If the perf.data file doesn't
contain timed LBR information, columns are filled with "-".
Jin Yao [Fri, 30 Nov 2018 13:54:55 +0000 (21:54 +0800)]
perf annotate: Create a annotate2 flag in struct symbol
We often use the symbol__annotate2() to annotate a specified symbol.
While annotating may take some time, so in order to avoid annotating the
same symbol repeatedly, the patch creates a new flag to indicate the
symbol has been annotated.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1543586097-27632-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Fri, 30 Nov 2018 13:54:54 +0000 (21:54 +0800)]
perf annotate: Compute average IPC and IPC coverage per symbol
Add support to 'perf report' annotate view or 'perf annotate --stdio2'
to aggregate the IPC derived from timed LBRs per symbol. We compute the
average IPC and the IPC coverage percentage.
tools lib traceevent: Add sanity check to is_timestamp_in_us()
This patch adds a sanity check to is_timestamp_in_us() input parameter
trace_clock. It avoids a potential segfault in this function for the
case trace_clock is NULL.
Reported-by: Slavomir Kaslev <kaslevs@vmware.com> Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20181128145552.68c4f87b@gandalf.local.home Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf beauty mmap_flags: Check if the arch has a mmap.h file
If not, then just use what is in asm-generic. This fixes the build for
my sh4, m68k and riscv64 perf test build containers that were failing
due to 80ee5668b8a7 ("perf beauty: Add a generator for MAP_ mmap's flag
constants"), that were not covered in the cset introducing those
tools/arch/*/include/uapi/asm/mman.h files.
f3539c12d819 ("tools include: Add uapi mman.h for each architecture")
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 80ee5668b8a7 ("perf beauty: Add a generator for MAP_ mmap's flag constants") Link: https://lkml.kernel.org/n/tip-rpy9t2e0wxpnum1yvxhreafe@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexey Budankov [Tue, 6 Nov 2018 09:07:19 +0000 (12:07 +0300)]
perf record: Extend trace writing to multi AIO
Multi AIO trace writing allows caching more kernel data into userspace
memory postponing trace writing for the sake of overall profiling data
thruput increase. It could be seen as kernel data buffer extension into
userspace memory.
With an --aio option value different from 0 (default value is 1) the
tool has capability to cache more and more data into user space along
with delegating spill to AIO.
That allows avoiding to suspend at record__aio_sync() between calls of
record__mmap_read_evlist() and increases profiling data thruput at the
cost of userspace memory.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/050bb053-e7f3-aa83-fde7-f27ff90be7f6@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexey Budankov [Tue, 6 Nov 2018 09:03:35 +0000 (12:03 +0300)]
perf mmap: Map data buffer for preserving collected data
The map->data buffer is used to preserve map->base profiling data for
writing to disk. AIO map->cblock is used to queue corresponding
map->data buffer for asynchronous writing.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5fcda10c-6c63-68df-383a-c6d9e5d1f918@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ on ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
$ ls -la /tmp/build/perf/feature/test-libaio.*
-rwxrwxr-x. 1 acme acme 18296 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.bin
-rw-rw-r--. 1 acme acme 1165 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.d
-rw-rw-r--. 1 acme acme 0 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.make.output
$
$ grep -i aio /tmp/build/perf/FEATURE-DUMP
feature-libaio=1
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5fcda10c-6c63-68df-383a-c6d9e5d1f918@linux.intel.com
[ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Mon, 26 Nov 2018 12:12:52 +0000 (14:12 +0200)]
perf intel-pt: Fix error with config term "pt=0"
Users should never use 'pt=0', but if they do it may give a meaningless
error:
$ perf record -e intel_pt/pt=0/u uname
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for
event (intel_pt/pt=0/u).
Fix that by forcing 'pt=1'.
Committer testing:
# perf record -e intel_pt/pt=0/u uname
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u).
/bin/dmesg | grep -i perf may provide additional information.
# perf record -e intel_pt/pt=0/u uname
pt=0 doesn't make sense, forcing pt=1
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data ]
#
This basically replicates what was done for 'perf report' in:
b226a5a72901 ("perf report: Allow user to specify path to kallsyms file")
This should help with resolving eBPF symbols, that are in kallsyms but,
of course, not in vmlinux.
Reported-by: Ivan Babrou <ibobrik@gmail.com> Tested-by: Ivan Babrou <ibobrik@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-x52mx1ybq8128rtg9hjrj5qk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wen Yang [Tue, 27 Nov 2018 09:06:10 +0000 (17:06 +0800)]
perf bpf: Use ERR_CAST instead of ERR_PTR(PTR_ERR())
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)). This
makes it more readable and also fix this warning detected by
err_cast.cocci:
tools/perf/util/bpf-loader.c:1606:11-18: WARNING: ERR_CAST can be used with op
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wen Yang <yellowriver2010@hotmail.com> Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/20181127090610.28488-1-wen.yang99@zte.com.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools include: Adopt ERR_CAST() from the kernel err.h header
Add ERR_CAST(), so that tools can use it, just like the kernel.
This addresses coccinelle checks that are being performed to tools/ in
addition to kernel sources, so lets add this to cover that and to get
tools code closer to kernel coding standards.
This originally was introduced in the kernel headers in this cset:
d1bc8e954452 ("Add an ERR_CAST() function to complement ERR_PTR and co.")
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Wen Yang <yellowriver2010@hotmail.com> Cc: zhong.weidong@zte.com.cn Link: https://lkml.kernel.org/n/tip-tlt97p066zyhzqhl5jt86og7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 22 Nov 2018 13:55:45 +0000 (15:55 +0200)]
perf tests record: Allow for 'sleep' being 'coreutils'
If the 'sleep' command is provided by coreutils, then the "PERF_RECORD_*
events & perf_sample fields" test will fail because the MMAP name is
'coreutils' not 'sleep', and there is an extra COMM event. Fix the test
to detect that case.
Adrian Hunter [Thu, 22 Nov 2018 11:29:37 +0000 (13:29 +0200)]
tools lib traceevent: Fix compile warnings in tools/lib/traceevent/event-parse.c
Fix following warnings:
event-parse.c: In function ‘tep_find_event_by_name’:
event-parse.c:3521:21: warning: ‘event’ may be used uninitialized in this function [-Wmaybe-uninitialized]
pevent->last_event = event;
~~~~~~~~~~~~~~~~~~~^~~~~~~
CC ui/gtk/hists.o
LINK plugin_mac80211.so
CC nlattr.o
event-parse.c: In function ‘tep_data_lat_fmt’:
event-parse.c:5200:4: warning: ‘migrate_disable’ may be used uninitialized in this function [-Wmaybe-uninitialized]
trace_seq_printf(s, "%d", migrate_disable);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
event-parse.c:5207:4: warning: ‘lock_depth’ may be used uninitialized in this function [-Wmaybe-uninitialized]
trace_seq_printf(s, "%d", lock_depth);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
LINK plugin_sched_switch.so
LINK plugin_function.so
LINK plugin_xen.so
event-parse.c: In function ‘tep_event_info’:
event-parse.c:5047:7: warning: ‘len_arg’ may be used uninitialized in this function [-Wmaybe-uninitialized]
trace_seq_printf(s, format, len_arg, (char)val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
event-parse.c:4884:6: note: ‘len_arg’ was declared here
int len_arg;
^~~~~~~
event-parse.c:4338:11: warning: ‘vsize’ may be used uninitialized in this function [-Wmaybe-uninitialized]
val = tep_read_number(pevent, bptr, vsize);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
event-parse.c:4224:6: note: ‘vsize’ was declared here
int vsize;
^~~~~
$ gcc --version
gcc (Clear Linux OS for Intel Architecture) 8.2.1 20180502
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Link: http://lkml.kernel.org/r/20181122112937.10582-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 6 Nov 2018 21:07:12 +0000 (23:07 +0200)]
perf script: Use fallbacks for branch stacks
Branch stacks do not necessarily have the same cpumode as the 'ip'. Use
the fallback functions in those cases.
This patch depends on patch "perf tools: Add fallback functions for cases
where cpumode is insufficient".
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable@vger.kernel.org # 4.19 Link: http://lkml.kernel.org/r/20181106210712.12098-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 6 Nov 2018 21:07:11 +0000 (23:07 +0200)]
perf tools: Use fallback for sample_addr_correlates_sym() cases
thread__resolve() is used in the sample_addr_correlates_sym() cases
where 'addr' is a destination of a branch which does not necessarily
have the same cpumode as the 'ip'. Use the fallback function in that
case.
This patch depends on patch "perf tools: Add fallback functions for
cases where cpumode is insufficient".
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable@vger.kernel.org # 4.19 Link: http://lkml.kernel.org/r/20181106210712.12098-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 6 Nov 2018 21:07:10 +0000 (23:07 +0200)]
perf thread: Add fallback functions for cases where cpumode is insufficient
For branch stacks or branch samples, the sample cpumode might not be
correct because it applies only to the sample 'ip' and not necessary to
'addr' or branch stack addresses. Add fallback functions that can be
used to deal with those cases
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable@vger.kernel.org # 4.19 Link: http://lkml.kernel.org/r/20181106210712.12098-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 6 Nov 2018 21:07:10 +0000 (23:07 +0200)]
perf machine: Record if a arch has a single user/kernel address space
Some architectures have a single address space for kernel and user
addresses, which makes it possible to determine if an address is in
kernel space or user space. Some don't, e.g.: sparc.
Cache that info in perf_env so that, for instance, code needing to
fallback failed symbol lookups at the kernel space in single address
space arches can lookup at userspace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable@vger.kernel.org # 4.19 Link: http://lkml.kernel.org/r/20181106210712.12098-2-adrian.hunter@intel.com
[ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf env: Also consider env->arch == NULL as local operation
We'll set a new machine field based on env->arch, which for live mode,
like with 'perf top' means we need to use uname() to figure the name of
the arch, fix perf_env__arch() to consider both (env == NULL) and
(env->arch == NULL) as local operation.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: stable@vger.kernel.org # 4.19 Link: https://lkml.kernel.org/n/tip-vcz4ufzdon7cwy8dm2ua53xk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / mirror_ubuntu-eoan-kernel.git / log