Dave Airlie [Tue, 4 Aug 2020 02:55:41 +0000 (12:55 +1000)]
drm/ttm: export memory type debug entrypoint.
As suggested on review, just export the memory type debug for
drivers to use, while also making the debug callback optional
(don't need to test for system as it won't init it).
rename it to be more consistent with object name for now.
(we may rename all the objects later.)
drm/mgag200: Set PCI option register in G200SE models
The initial value of the PCI option register got lost while refactoring
the driver init code. Restore the setting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Airlie <airlied@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Fixes: 2021708e0d6e ("drm/mgag200: Initialize PCI registers early during device setup") Cc: Lyude Paul <lyude@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200804065158.21049-1-tzimmermann@suse.de
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
This patch adds support for G200 desktop cards. We can reuse the whole
memory and modesetting code. A few PCI and DAC register values have to
be updated accordingly.
The most significant change is in the PLL setup. The driver parses the
device's BIOS to retrieve clock limits and reference clocks. With no BIOS
found, safe defaults are being used.
v2:
* copy BIOS ROM to system memory and access with regular
load/store; resolves potential HW limitations
* fix some stray whitespaces
drm/mgag200: Move G200SE's unique id into model-specific data
The unique revision id is only useful for G200SE devices. Store the
value in model-specific data within struct mga_device. While at it,
the patch also adds an init helper for the value.
drm/mgag200: Enable MGA mode during device register initialization
MGA cards can run in traditional VGA mode or an enhanced MGA mode; with
the latter being required for KMS. So far, MGA mode was enabled during
modesetting. As it's fundamental for device operation, the patch moves
it next to the device register setup.
drm/mgag200: Initialize PCI registers early during device setup
So far, PCI option registers were initialized as part of modesetting,
which is late in the process. As these registers control fundamental
operation, they should be set early.
The patch moves the PCI option handling into device register setup,
before even the device MMIO memory is being mapped. No functional
changes made.
Moving the PCI code next to the device-register setup also allows to
remove the has_sdram field from struct mga_device. The state is now
local to the init helper.
drm/mgag200: Move register initialization into helper function
The mgag200 driver maps registers into the address space. Move the
code into a separate helper function. No functional changes.
One small difference is in the handling of SDRAM/SGRAM. MGA devices
can come with either SDRAM or SGRAM. So far, the driver checked for
SDRAM, which is the common case. The patch moves this code into a
separate helper and checks for SGRAM, which is the special case. The
test itself is the same as before.
SHMEM pages use write-combine caching by default, but can also use the
platform's default page caching. Doing so may improve the performance
of I/O on the framebuffer.
Mgag200's hardware does not access framebuffer pages directly (i.e.,
via DMA), so enabling caching does not have an effect on consistency
of the framebuffer memory or the displayed data.
This turns the ast's device cleanup code into a managed release helper
function. Note that the code uses devres helpers. The release function
switches the device back to VGA mode and therefore runs during HW device
cleanup; not at DRM device cleanup.
Several places in ast use ast->dev, when a dev pointer is already
available within the function. Remove the extra indirection. No
functional changes made.
This is just a small cleanup before embedding the DRM device instance
in struct ast_private.
drm/ast: Replace struct_drm_device.dev_private with to_ast_private()
The ast code still references dev_private in several place when looking
up the ast device structure. Convert the remaining locations to use
to_ast_private().
drm/ast: Replace driver load/unload functions with device create/destroy
The ast driver's load and unload functions are left-overs from when
struct drm_driver.load/unload was still in use. The PCI probe helper
allocated the DRM device and ran load to initialize it.
This patch replaces this code with device create and destroy. The
main difference is that the device's create function allocates the
DRM device and ast structures in the same place. This will be required
for switching ast to managed allocations.
Putting the DRM driver to the top of the file and the PCI code to the
bottom makes ast_drv.c more readable. While at it, the patch prefixes
file-scope variables with ast_.
drm/ast: Embed CRTC and connector in struct ast_private
Only single instances of CRTC and connector are supported per
device. Embed both in ast's structure and remove the individual
memory allocations. DRM's CRTC cleanup helpers replace the rsp.
destroy function in ast.
While at it, also convert to_ast_connector() to a function.
Daniel Vetter [Sat, 1 Aug 2020 09:26:25 +0000 (11:26 +0200)]
drm/syncobj: Tune down unordered timeline DRM_ERROR
Userspace can provoke this, we generally don't allow userspace to spam
dmesg. Tune it down to debug. Unfortunately we don't have easy access
to the drm_device here (not at all without changing a few things), so
leave it as old style dmesg output for now.
References: https://patchwork.freedesktop.org/series/80146/ Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: "Christian König" <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200801092625.1107609-1-daniel.vetter@ffwll.ch
The previous memset operation was not correctly zeroing the alpha
channel to compute the crc, and as a result, the IGT subtest
kms_cursor_crc/pipe-A-cursor-alpha-transparent fails.
Bernard Zhao [Sat, 1 Aug 2020 12:02:13 +0000 (20:02 +0800)]
drm/panel: remove return value of function drm_panel_add
The function "int drm_panel_add(struct drm_panel *panel)"
always returns 0, this return value is meaningless.
Also, there is no need to check return value which calls
"drm_panel_add and", error branch code will never run.
Christian König [Thu, 23 Jul 2020 15:13:47 +0000 (17:13 +0200)]
drm/ttm: remove the init_mem_type callback
It is a very strange concept to call a function which just
calls back the caller for the functions parameters.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/382085/
Christian König [Thu, 23 Jul 2020 14:40:17 +0000 (16:40 +0200)]
drm/vram-helper: stop implementing init_mem_type
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/382086/
Christian König [Tue, 21 Jul 2020 07:58:13 +0000 (09:58 +0200)]
drm/ttm: remove TTM_MEMTYPE_FLAG_FIXED v2
Instead use a boolean field in the memory manager structure.
Also invert the meaning of the field since the use of a TT
structure is the special case here.
v2: cleanup zero init.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/382079/
Christian König [Mon, 20 Jul 2020 12:41:31 +0000 (14:41 +0200)]
drm/ttm: initialize the system domain with defaults v2
Instead of repeating that in each driver.
v2: keep the caching limitation for VMWGFX for now.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/382078/
Paul Cercueil [Thu, 30 Jul 2020 14:48:30 +0000 (16:48 +0200)]
drm/ingenic: ipu: Only enable clock when needed
Instead of keeping the IPU clock enabled constantly, enable and disable
it on demand, when the IPU plane is used. That way, we won't use any
extra power when the IPU is not used.
Paul Cercueil [Thu, 30 Jul 2020 14:48:29 +0000 (16:48 +0200)]
drm/ingenic: ipu: Remove YUV422 from supported formats on JZ4725B
When configuring the IPU for packed YUV 4:2:2, depending on the scaling
ratios given by the source and destination resolutions, it is possible
to crash the IPU block, to the point where a software reset of the IP
does not fix it. This can happen anytime, in the first few frames, or
after dozens of minutes. The same crash also happens when the IPU is
fully controlled by the LCD controller (in that case no HW register is
written at any moment after startup), which points towards a hardware
bug.
Thanksfully multiplanar YUV is not affected.
Until this bug is fixed or worked around, address this issue by removing
support for YUV 4:2:2 on the IPU of the JZ4725B.
v2: Update commit message (remove the "crash beyond repair" bit)
Paul Cercueil [Thu, 30 Jul 2020 14:48:28 +0000 (16:48 +0200)]
drm/ingenic: ipu: Only restart manually on older SoCs
On older SoCs, it is necessary to restart manually the IPU when a frame
is done processing. Doing so on newer SoCs (JZ4760/70) kinds of work
too, until the input or output resolutions or the framerate are too
high.
Make it work properly on newer SoCs by letting the LCD controller
trigger the IPU frame restart signal.
Pekka Paalanen [Tue, 7 Jul 2020 11:38:05 +0000 (14:38 +0300)]
drm/doc: device hot-unplug for userspace
Set up the expectations on how hot-unplugging a DRM device should look like to
userspace.
Written by Daniel Vetter's request and largely based on his comments in IRC and
from https://lists.freedesktop.org/archives/dri-devel/2020-May/265484.html .
A related Wayland protocol change proposal is at
https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/35
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: Simon Ser <contact@emersion.fr> Cc: Ben Skeggs <skeggsb@gmail.com> Cc: Karol Herbst <kherbst@redhat.com> Acked-by: Simon Ser <contact@emersion.fr> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200707113805.30936-1-ppaalanen@gmail.com
Tian Tao [Tue, 28 Jul 2020 12:55:07 +0000 (20:55 +0800)]
drm/hisilicon: Fixed the warning: Assignment of 0/1 to bool variable
fixed the following warning:
hibmc_drm_drv.c:296:1-18:WARNING: Assignment of 0/1 to bool variable.
hibmc_drm_drv.c:301:2-19: WARNING: Assignment of 0/1 to bool variable.
v2:
using the pci_dev.msi_enabled instead of priv->msi_enabled.
v3:
just call pci_enable_msi() and pci_disable_msi(), it's no need to
set dev->pdev->msi_enabled again.
Paul Cercueil [Tue, 28 Jul 2020 15:16:41 +0000 (17:16 +0200)]
drm/ingenic: Validate mode in a .mode_valid callback
Validate modes in the drm_crtc_helper_funcs.mode_valid() callback, which
is designed for this purpose, instead of doing it in
drm_crtc_helper_funcs.atomic_check().
Add support for Powertip PH800480T013 800x480 parallel LCD, this
one is used in the Raspberry Pi 7" touchscreen display unit.
Signed-off-by: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200728121246.23304-3-marex@denx.de
Marek Vasut [Tue, 28 Jul 2020 12:12:45 +0000 (14:12 +0200)]
dt-bindings: Add DT bindings for Powertip PH800480T013
Add DT bindings for Powertip PH800480T013 800x480 parallel LCD,
this one is used in the Raspberry Pi 7" touchscreen display unit.
Signed-off-by: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200728121246.23304-2-marex@denx.de
Marek Vasut [Tue, 28 Jul 2020 12:12:44 +0000 (14:12 +0200)]
dt-bindings: Add vendor prefix for Powertip
The Powertip Tech. Corp. is an LCD panel manufacturer.
Signed-off-by: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200728121246.23304-1-marex@denx.de
drm: mxsfb: Merge mxsfb_set_pixel_fmt() and mxsfb_set_bus_fmt()
The mxsfb_set_pixel_fmt() and mxsfb_set_bus_fmt() functions both deal
with format configuration, are always called in a row from
mxsfb_crtc_mode_set_nofb(), and set fields from the LCDC_CTRL register.
This requires a read-modify-update cycle in mxsfb_set_bus_fmt(). Make
this more efficient by merging them together.
drm: mxsfb: Turn mxsfb_set_pixel_fmt() into a void function
The mxsfb_set_pixel_fmt() function returns an error when the selected
pixel format is unsupported. This can never happen, as such errors are
caught by the DRM core. Remove the error check.
drm: mxsfb: Update internal IP version number for i.MX6SX
The LCDIF present in the i.MX6SX has extra features compared to
the i.MX28. It has however lost its IP version register, so no official
version number is known. Bump the version to MXSFB_V6 following the i.MX
version, in preparation for support for the additional features.
drm: mxsfb: Add i.MX7 and i.MX8M to the list of supported SoCs in Kconfig
Extend the Kconfig option description by listing the i.MX7 and i.MX8M
SoCs, as they are supported by the same driver. Replace the list of SoCs
in the short description with just "(e)LCDIF LCD controller" to avoid
expanding it further in the future as support for more SoCs is added.
Enable vblank handling when the CRTC is turned on and disable it when it
is turned off. This requires moving vblank init after the KMS pipeline
initialisation, otherwise drm_vblank_init() gets called with 0 CRTCs.
The driver attempts agressive power management by enabling and disabling
the AXI clock around register accesses. This results in attempts to
enable and disable the clock in the IRQ handler, which is a no-go as
preparing or unpreparing the clock may sleep.
On the other hand, the driver enables the AXI clock when enabling the
CRTC and keeps it enabled until the CRTC is disabled. This is correct,
and renders the power management attempt pointless, as interrupts are
not supposed to occur when the CRTC is off.
The same reasoning can be applied to the CRTC .enable_vblank() and
.disable_vblank() that are not supposed to be called when the CRTC off
and thus don't require manual handling of the AXI clock. Furthermore,
vblank handling is never enabled, which results in the vblank enable and
disable handlers never being called.
To fix this, remove the manual clock handling in the IRQ, the CRTC
.enable_vblank() and .disable_vblank() handlers and the plane
.atomic_update() handler. We however need to handle the clock manually
in mxsfb_irq_disable() as is calls .disable_vblank() manually and is
used both at probe and remove time.
The clock disabling is also moved to the last step of the
mxsfb_crtc_atomic_disable() function, to prepare for enabling vblank
handling.
drm: mxsfb: Move vblank event arm to CRTC .atomic_flush()
The vblank event is armed in the plane .atomic_update(). This works fine
as we have a single plane, and was the only option when the driver was
using the drm_simple_kms_helper helper, but will break as soon as
multiple planes are supported. Move it to CRTC .atomic_flush().
drm: mxsfb: Stop using DRM simple display pipeline helper
The DRM simple display pipeline helper only supports a single plane. In
order to prepare for support of the alpha plane on i.MX6SX and i.MX7,
move away from the helper. No new feature is added.
drm: mxsfb: Remove register definitions from mxsfb_crtc.c
mxsfb_crtc.c defines several macros related to register addresses and
bit, which duplicates macros from mxsfb_regs.h. Use the macros from
mxsfb_regs.h instead and remove them.
drm: mxsfb: Use LCDC_CTRL register name explicitly
The LCDC_CTRL register is located at address 0x0000. Some of the
accesses to the register simply use the mxsfb->base address. Reference
the LCDC_CTRL register explicitly instead to clarify the code.
drm: mxsfb: Clarify format and bus width configuration
Replace the convoluted way to set the format and bus width through
difficult to read macros with more explicit ones. Also remove the
outdated comment related to the limitations on bus width setting as it
doesn't apply anymore (the bus width can be specified through the
display_info bus format).
drm: mxsfb: Remove unused macros from mxsfb_regs.h
mxsfb_regs.h defines macros related to register bits. Some of them are
not used and don't clearly map to any particular register, so their
purpose isn't known. Remove them.
drm: mxsfb: Use BIT() macro to define register bitfields
Using BIT() is preferred over manual shifts as it's more readable,
handles the 1 << 31 case properly, and avoids other mistakes as shown by
the DEBUG0_HSYNC and DEBUG0_VSYNC bits (that are currently unused). Use
it.
Replace the manual connector implementation based on drm_panel with the
drm_panel_bridge helper. This simplifies the mxsfb driver by removing
connector-related code, and standardizing all pipeline control
operations on bridges.
A hack is needed to get hold of the connector, as that's our only source
of bus flags and formats for now. As soon as the bridge API provides us
with that information this can be fixed.
Commit 8e93f1028d74 ("drm/mxsfb: Use drm_fbdev_generic_setup()")
replaced fbdev handling with drm_fbdev_generic_setup() but left
inclusion of the drm/drm_fb_cma_helper.h header. Remove it.
Christian König [Thu, 23 Jul 2020 08:58:12 +0000 (10:58 +0200)]
drm/ttm: fix pipelined gutting for evictions v2
We can't pipeline that during eviction because the memory needs
to be available immediately.
v2: fix how we cleanup the BOs resources
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Alex Sierra <alex.sierra@amd.com> Link: https://patchwork.freedesktop.org/patch/379039/
Paul Menzel [Fri, 3 Jul 2020 14:29:39 +0000 (16:29 +0200)]
drm/amdgpu: Change type of module param `ppfeaturemask` to hexint
The newly added hexint helper is more convenient for bitmasks.
Before:
$ more /sys/module/amdgpu/parameters/ppfeaturemask 4294950911
After:
$ more /sys/module/amdgpu/parameters/ppfeaturemask
0xffffbfff
Cc: amd-gfx@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/374724/
projects / mirror_ubuntu-jammy-kernel.git / log