This reverts commit 8dce4b265a5357731058f69645840dabc718c687.
The revert is slighly modified:
- Documentation/media/v4l-drivers/index.rst is ,ot restored since removed from tree
- drivers/staging/media/Makefile is not restored since the zoran driver
is not compilable yet.
Marek Szyprowski [Mon, 28 Sep 2020 08:48:44 +0000 (10:48 +0200)]
media: platform: s5p-mfc: Fix adding a standard frame skip mode control
Add proper control type to the recently introduced
V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE control. This will forward it to
v4l2_ctrl_new_std_menu() not v4l2_ctrl_new_std(), what causes the
failure. This fixes the following warning during driver initialization:
s5p_mfc_enc_ctrls_setup:2671: Adding control (18) failed
s5p_mfc_open:811: Failed to setup mfc controls
Fixes: ef56b3ee4f54 ("media: s5p-mfc: Use standard frame skip mode control") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When compared with a stream generated via ffmpeg, it can be
noticed that the PES doesn't contain any PCR info. That could
cause problems with userspace decoding. So, rewrite the
logic that fills the adaptation info, in order to allow it
to add PCR frames without breaking frame alignment.
In order to better test userspace applications, add an encoding
for the strings. The original channel string is also too big.
As we're just playing the first compasses of the 5th Beethoven
Symphony, change the service name to just "Beethoven". Also,
add a provider's name. For such purpose, let's point it to
the Linux media community website.
With such changes, the SDT table now looks more like one got
from a real digital TV channel:
SDT
| table_id 0x42
| section_length 44
| one 2
| zero 1
| syntax 1
| transport_stream_id 1860
| current_next 1
| version 0
| one2 3
| section_number 0
| last_section_number 0
| network_id 65281
| reserved 255
|\
|- service 0x0880
| EIT schedule 0
| EIT present following 0
| free CA mode 0
| running status 4
| descriptor length 27
| 0x48: service_descriptor
| service type 1
| provider 'LinuxTV.org'
| name 'Beethoven'
|_ 1 services
There's no reason to use static vars to store PSI version
numbers.
Also, currently, version numbers are starting with 0x01,
because there's a code being called that increases it to
1 for all table initializer code, as the code may support
dynamic changes at the PS tables on some future.
So, let's just initialize them to 0x1f, in order for the
versions to be reported as starting from 0.
media: vidtv: fix initialization of the network_id field at SDT
This field should point to the network ID, and has different
ranges for cable, terrestrial or satellite. It also has
an special range for temporary private usage.
For now, let's use the temporary private one. Once the
Network Information Table (NIT) gets added, this should be
reviewed.
media: vidtv: remove more ENDIAN_BITFIELD nonsense
Changeset 870e350d4e39 ("media: vidtv: get rid of ENDIAN_BITFIELD nonsense")
was incomplete. There are still some wrong endannes logic at
the driver. Get rid of them.
media: hist-v4l2.rst: remove :c:`type` from structs and enums
Using struct|enum :c:`type` here sounds a bad idea, as it may be
documenting data types that were already removed. Also, it makes
the file harder to read.
As automarkup.py should be able to handle those cases, let's
just get rid of the markup.
While not required by automarkup, in order to make easier for
grep, both type and names are now at the same line.
media: docs: ipu3.rst: rely at automarkup extension
There are several :c:type: definitions there, in order to
do cross-references with the driver's documentation.
Those are broken when docs are built with Sphinx 3.x, as
it would require :c:struct: instead.
For Sphinx < 3.x, the automarkup.py extension is able to do the
replacement already, and a future improvement on it should make
it also work with Sphinx 3.x.
So, get rid of the usage of the :c:type: macro there.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: glossary.rst: use the right case for glossary entries
Sphinx 3.x is pedantic with glossary entries:
Documentation/userspace-api/media/glossary.rst:17: WARNING: term device driver not found in case sensitive match.made a reference to Device Driver instead.
Documentation/userspace-api/media/glossary.rst:59: WARNING: term media hardware not found in case sensitive match.made a reference to Media Hardware instead.
Documentation/userspace-api/media/glossary.rst:59: WARNING: term IP block not found in case sensitive match.made a reference to IP Block instead.
Documentation/userspace-api/media/glossary.rst:64: WARNING: term hardware component not found in case sensitive match.made a reference to Hardware Component instead.
Documentation/userspace-api/media/glossary.rst:64: WARNING: term ip block not found in case sensitive match.made a reference to IP Block instead.
Documentation/userspace-api/media/glossary.rst:70: WARNING: term peripheral not found in case sensitive match.made a reference to Peripheral instead.
Documentation/userspace-api/media/glossary.rst:130: WARNING: term V4L2 hardware not found in case sensitive match.made a reference to V4L2 Hardware instead.
Documentation/userspace-api/media/glossary.rst:151: WARNING: term hardware peripheral not found in case sensitive match.made a reference to Hardware Peripheral instead.
Documentation/userspace-api/media/glossary.rst:183: WARNING: term device node not found in case sensitive match.made a reference to Device Node instead.
Documentation/userspace-api/media/glossary.rst:191: WARNING: term bridge driver not found in case sensitive match.made a reference to Bridge Driver instead.
While it works with case-insensitive entires, it complains.
Let's fix it, in order to cleanup the warnings. Also, I won't
doubt that a later change on Sphinx will end breaking support
for it.
media: staging: rkisp1: cap: protect access to buf with the spin lock
The function 'rkisp1_stream_start' calls 'rkisp1_set_next_buf'
which access the buffers, so the call should be protected by
taking the cap->buf.lock.
After this patch, all locks are reviewed and commented so remove
the TODO item "review and comment every lock"
media: staging: rkisp1: use the right variants of spin_lock
When locking, use either 'spin_lock' or 'spin_lock_irq'
according to the context. There is nowhere need to
use 'spin_lock_irqsave'.
Outside of irq context, always use 'spin_lock_irq'
to be on the safe side.
media: staging: rkisp1: params: no need to lock default config
In the function 'rkisp1_params_config_parameter' the lock
is taken while applying the default config. But the lock
only needs to protect the buffers list and the 'is_streaming'
field, so move the locking to lock only what is needed.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: stats: protect write to 'is_streaming' in start_streaming cb
The field stats->is_streaming is written in 'start_streaming' callback
without the stats->lock protection.
The isr might run together with the callback so 'spin_lock_irq'
should be used.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: isp: add a warning and debugfs var for irq delay
The signal RKISP1_CIF_ISP_FRAME is set when the ISP completes
outputting the frame to the next block in the pipeline.
In order to keep buffer synchronization we assume that the
RKISP1_CIF_ISP_V_START signal never arrives together with the
RKISP1_CIF_ISP_FRAME signal.
In case those signals arrive together then the code is not able to
tell if the RKISP1_CIF_ISP_FRAME signal relates to the frame of
the current v-start or the previous. This patch adds a WARN_ONCE
and a debugfs var to catch it.
media: staging: rkisp1: remove atomic operations for frame sequence
The isp.frame_sequence is now read only from the irq handlers
that are all fired from the same interrupt, so there is not need
for atomic operation.
In addition, the frame seq incrementation is moved from
rkisp1_isp_queue_event_sof to rkisp1_isp_isr to make the code
clearer and the incorrect inline comment is removed.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: params: set vb.sequence to be the isp's frame_sequence + 1
The params isr is called when the ISP finishes processing a frame
(RKISP1_CIF_ISP_FRAME). Configurations performed in the params isr
will be applied on the next frame. Since frame_sequence is updated
on the vertical sync signal, we should use frame_sequence + 1 as
the vb.sequence of the params buffer to indicate to userspace on
which frame these parameters are being applied.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: params: avoid using buffer if params is not streaming
Currently, the first buffer queued in the params node is returned
immediately to userspace and a copy of it is saved in the field
'cur_params'. The copy is later used for the first configuration
when the stream is initiated by one of selfpath/mainpath capture nodes.
There are 3 problems with this implementation:
- The first params buffer is applied and returned to userspace even if
userspace never calls to streamon on the params node.
- If the first params buffer is queued after the stream started on the
params node then it will return to userspace but will never be used.
- The frame_sequence of the first buffer is set to -1 if the main/selfpath
did not start streaming.
A correct implementation is to apply the first params buffer when stream
is started from mainpath/selfpath and only if params is also streaming.
The patch adds a new function 'rkisp1_params_apply_params_cfg' which takes
a buffer from the buffers queue, apply it and returns it to userspace.
The function is called from the irq handler and when main/selfpath stream
starts - in the function 'rkisp1_params_config_parameter'
Also remove the fields 'cur_params', 'is_first_params' which are no
more needed.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: params: use the new effect value in cproc config
The cproc (color processing) configuration needs to know if
an image effect is configured. The code uses the image effect
in 'cur_params' which is the first params buffer queued in the stream.
This is the wrong place to read the value. The value should be
taken from the current params buffer.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: params: in the isr, return if buffer list is empty
Currently the code in the isr checks if the buffer list is not
empty before referencing a buffer and then check again if the
buffer is not NULL. Instead we can save one 'if' statement by
returning if the buffers list is empty.
Also remove non-helpful inline doc 'get one empty buffer'
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: params: upon stream stop, iterate a local list to return the buffers
The code in '.stop_streaming' callback releases and acquire the lock
at each iteration when returning the buffers.
Holding the lock disables interrupts so it should be minimized.
To make the code cleaner and still minimize holding the lock,
the buffer list is first moved to a local list and
then can be iterated without the lock.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: docs: v4l2-subdev: move calling ops to a subsection
Documentation on how to call the subdev ops is currently in the middle of
synchronous and asynchronous registration. Move it to a dedicated
subsection after the registration methods.
Also move the final paragraph "The advantage of using v4l2_subdev..." to
the beginning of the new section as it has an introductory content.
[hverkuil: correct accidental deletion of the last part of a sentence]
media: docs: v4l2-subdev: move "Subdev registration" to a subsection
The subdev registration topic is pretty lengthy, and takes more than
half of the "V4L2 sub-devices" section. Help readers in finding their
way through the document by dedicating a subsection to
"Subdev registration".
Each of the two registration methods takes many paragraphs, but since
adding a subsubsection would be overkill, just emphasize them in bold.
Add linux,autosuspend-period property for gpio ir receiver. Some cpuidle
systems wake from idle may take a bit long time, for such case, need
disable cpuidle temporarily.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: rc: gpio-ir-recv: add QoS support for cpuidle system
GPIO IR receive is much rely on interrupt response, uneven interrupt
latency will lead to incorrect timing, so the decoder fails to decode
it. The issue is particularly acute on some systems which support
cpuidle, not all, dynamically disable and enable cpuidle can solve this
problem to a great extent.
However, there is a downside to this approach, the measurement of header
on the first frame may incorrect. Test on i.MX8M serials, when enable
cpuidle, interrupt latency could be about 500us.
With this patch:
1. has no side effect on non-cpuidle system, even runtime pm api won't
be invoked to avoid a bunch of pm busy work for devices that do not need
it, including spinlocks, ktime, etc.
2. latency is still much longer for the first gpio interrupt on cpuidle
system, so the first frame may not be decoded. Generally, RC would transmit
multiple frames at once press, we can sacrifice the first frame.
3. add "linux,autosuspend-period" property in device tree if you also
suffer this cpuidle issue.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Constify a number of static structs that were not modified. In order to
be able to do that, const input arguments to a couple of functions that
not modify their argument. This allows the compiler to put them in
read-only memory, resulting in about 6k memory being read-only, and the
resulting module is 400 bytes smaller.
Before:
text data bss dec hex filename
15492 6873 0 22365 575d drivers/media/dvb-frontends/tda18271c2dd.ko
After:
text data bss dec hex filename
21021 897 0 21918 559e drivers/media/dvb-frontends/tda18271c2dd.ko
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Oliver Neukum [Thu, 24 Sep 2020 11:37:40 +0000 (13:37 +0200)]
media: flexcop-usb: sanity checking of endpoint type
Make sure the endpoint is ISOC in and do not hard code USB_DIR_IN.
Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Vaibhav Gupta [Sun, 30 Aug 2020 09:44:14 +0000 (11:44 +0200)]
media: netup_unidvb: drop initialization of PM pointers
The .suspend() and .resume() callbacks are not defined for this driver.
Thus, just the unlisting of PM pointers in the struct initializer will make
no change in its behavior. Still unlisting is necessary so as to get rid of
.suspend and .resume pointers as they are part of the legacy framework and
should not be used in the driver code explicitly.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Oliver Neukum [Wed, 16 Sep 2020 13:50:51 +0000 (15:50 +0200)]
media: ati_remote: sanity check for both endpoints
If you do sanity checks, you should do them for both endpoints.
Hence introduce checking for endpoint type for the output
endpoint, too.
Reported-by: syzbot+998261c2ae5932458f6c@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: dvb-frontends: rtl2832_sdr: set error code in probe
If rtl2832_sdr_probe() encounters an unsupported tuner it cleans up
everything and returns 0. This can result in various bad things later.
The patch sets the error code on the corresponding path.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Nicolas Dufresne [Fri, 18 Sep 2020 00:27:51 +0000 (02:27 +0200)]
media: cedrus: Propagate OUTPUT resolution to CAPTURE
As per spec, the CAPTURE resolution should be automatically set based on
the OUTPUT resolution. This patch properly propagate width/height to the
capture when the OUTPUT format is set and override the user provided
width/height with configured OUTPUT resolution when the CAPTURE fmt is
updated.
This also prevents userspace from selecting a CAPTURE resolution that is
too small, avoiding kernel oops.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Tue, 18 Aug 2020 10:27:02 +0000 (12:27 +0200)]
media: pixfmt-meta-rkisp1.rst: add description of rkisp1 metadata formats in pixfmt-meta-rkisp1.rst
The metadata formats V4L2_META_FMT_RK_ISP1_PARAMS,
V4L2_META_FMT_RK_ISP1_STAT_3A are currently described in
two files under
drivers/staging/media/rkisp1/Documentation/media/uapi/v4l
This patch moves the description to one file:
Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst
The patch also extends the description and adds the rst file to
toctree.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: fix configuration for GREY pixelformat
This patch changes the device configuration to support capture
of V4L2_PIX_FMT_GREY video. The 'write_format' field of the format
description should be planar.
Also the array 'pixm->plane_fmt' that describes the planes should
be memset to 0 before filling it since the the cb, cr planes should
be 0.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: cap: simplify link validation by comparing media bus code
The capture has a mapping of the mbus code needed for each pixelformat.
This can be used to simplify the link validation by comparing the mbus
code in the capture with the code in the resizer.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: rsz: Add support to more YUV encoded mbus codes on src pad
Add support to more YUV encoded media bus formats on the resizer's
source pad. The patch defines an array rkisp1_rsz_yuv_formats[]
with the list of supported YUV media bus formats and their {hv}div
values. The {hv}div are used in the function 'rkisp1_rsz_config'
instead of the macros RKISP1_MBUS_FMT_(HV)DIV, and instead of
checking the capture format.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: rkisp1: rsz: enumerate the formats on the src pad according to the capture
Currently the resizer outputs the same media bus format
as the input. This is wrong since the resizer is also used
to downscale YUV formats. This patch changes the enumeration
of the supported formats. The supported formats on the sink pad
should be taken from the isp entity and the supported formats on
the source pad should be taken from the capture entity.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>