Mel Gorman [Tue, 16 Jun 2009 22:31:52 +0000 (15:31 -0700)]
page allocator: replace __alloc_pages_internal() with __alloc_pages_nodemask()
The start of a large patch series to clean up and optimise the page
allocator.
The performance improvements are in a wide range depending on the exact
machine but the results I've seen so fair are approximately;
kernbench: 0 to 0.12% (elapsed time)
0.49% to 3.20% (sys time)
aim9: -4% to 30% (for page_test and brk_test)
tbench: -1% to 4%
hackbench: -2.5% to 3.45% (mostly within the noise though)
netperf-udp -1.34% to 4.06% (varies between machines a bit)
netperf-tcp -0.44% to 5.22% (varies between machines a bit)
I haven't sysbench figures at hand, but previously they were within the
-0.5% to 2% range.
On netperf, the client and server were bound to opposite number CPUs to
maximise the problems with cache line bouncing of the struct pages so I
expect different people to report different results for netperf depending
on their exact machine and how they ran the test (different machines, same
cpus client/server, shared cache but two threads client/server, different
socket client/server etc).
I also measured the vmlinux sizes for a single x86-based config with
CONFIG_DEBUG_INFO enabled but not CONFIG_DEBUG_VM. The core of the
.config is based on the Debian Lenny kernel config so I expect it to be
reasonably typical.
This patch:
__alloc_pages_internal is the core page allocator function but essentially
it is an alias of __alloc_pages_nodemask. Naming a publicly available and
exported function "internal" is also a big ugly. This patch renames
__alloc_pages_internal() to __alloc_pages_nodemask() and deletes the old
nodemask function.
Warning - This patch renames an exported symbol. No kernel driver is
affected by external drivers calling __alloc_pages_internal() should
change the call to __alloc_pages_nodemask() without any alteration of
parameters.
Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Tue, 16 Jun 2009 22:31:50 +0000 (15:31 -0700)]
mm: alloc_large_system_hash check order
On an x86_64 with 4GB ram, tcp_init()'s call to alloc_large_system_hash(),
to allocate tcp_hashinfo.ehash, is now triggering an mmotm WARN_ON_ONCE on
order >= MAX_ORDER - it's hoping for order 11. alloc_large_system_hash()
had better make its own check on the order.
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: David Miller <davem@davemloft.net> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miao Xie [Tue, 16 Jun 2009 22:31:49 +0000 (15:31 -0700)]
cpuset,mm: update tasks' mems_allowed in time
Fix allocating page cache/slab object on the unallowed node when memory
spread is set by updating tasks' mems_allowed after its cpuset's mems is
changed.
In order to update tasks' mems_allowed in time, we must modify the code of
memory policy. Because the memory policy is applied in the process's
context originally. After applying this patch, one task directly
manipulates anothers mems_allowed, and we use alloc_lock in the
task_struct to protect mems_allowed and memory policy of the task.
But in the fast path, we didn't use lock to protect them, because adding a
lock may lead to performance regression. But if we don't add a lock,the
task might see no nodes when changing cpuset's mems_allowed to some
non-overlapping set. In order to avoid it, we set all new allowed nodes,
then clear newly disallowed ones.
[lee.schermerhorn@hp.com:
The rework of mpol_new() to extract the adjusting of the node mask to
apply cpuset and mpol flags "context" breaks set_mempolicy() and mbind()
with MPOL_PREFERRED and a NULL nodemask--i.e., explicit local
allocation. Fix this by adding the check for MPOL_PREFERRED and empty
node mask to mpol_new_mpolicy().
Remove the now unneeded 'nodes = NULL' from mpol_new().
Note that mpol_new_mempolicy() is always called with a non-NULL
'nodes' parameter now that it has been removed from mpol_new().
Therefore, we don't need to test nodes for NULL before testing it for
'empty'. However, just to be extra paranoid, add a VM_BUG_ON() to
verify this assumption.]
[lee.schermerhorn@hp.com:
I don't think the function name 'mpol_new_mempolicy' is descriptive
enough to differentiate it from mpol_new().
This function applies cpuset set context, usually constraining nodes
to those allowed by the cpuset. However, when the 'RELATIVE_NODES flag
is set, it also translates the nodes. So I settled on
'mpol_set_nodemask()', because the comment block for mpol_new() mentions
that we need to call this function to "set nodes".
Some additional minor line length, whitespace and typo cleanup.] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Paul Menage <menage@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miao Xie [Tue, 16 Jun 2009 22:31:47 +0000 (15:31 -0700)]
cpusets: update tasks' page/slab spread flags in time
Fix the bug that the kernel didn't spread page cache/slab object evenly
over all the allowed nodes when spread flags were set by updating tasks'
page/slab spread flags in time.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Paul Menage <menage@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miao Xie [Tue, 16 Jun 2009 22:31:46 +0000 (15:31 -0700)]
cpusets: restructure the function cpuset_update_task_memory_state()
The kernel still allocates the page caches on old node after modifying its
cpuset's mems when 'memory_spread_page' was set, or it didn't spread the
page cache evenly over all the nodes that faulting task is allowed to usr
after memory_spread_page was set. it is caused by the old mem_allowed and
flags of the task, the current kernel doesn't updates them unless some
function invokes cpuset_update_task_memory_state(), it is too late
sometimes.We must update the mem_allowed and the flags of the tasks in
time.
Slab has the same problem.
The following patches fix this bug by updating tasks' mem_allowed and
spread flag after its cpuset's mems or spread flag is changed.
This patch:
Extract a function from cpuset_update_task_memory_state(). It will be
used later for update tasks' page/slab spread flags after its cpuset's
flag is set
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Paul Menage <menage@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/page-writeback.c: dirty limit type should be unsigned long
get_dirty_limits() calls clip_bdi_dirty_limit() and task_dirty_limit()
with variable pbdi_dirty as one of the arguments. This variable is an
unsigned long * but both functions expect it to be a long *. This causes
the following sparse warnings:
warning: incorrect type in argument 3 (different signedness)
expected long *pbdi_dirty
got unsigned long *pbdi_dirty
warning: incorrect type in argument 2 (different signedness)
expected long *pdirty
got unsigned long *pbdi_dirty
Fix the warnings by changing the long * to unsigned long * in both
functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KOSAKI Motohiro [Tue, 16 Jun 2009 22:31:40 +0000 (15:31 -0700)]
vmscan: low order lumpy reclaim also should use PAGEOUT_IO_SYNC
Commit 33c120ed2843090e2bd316de1588b8bf8b96cbde ("more aggressively use
lumpy reclaim") increased how aggressive lumpy reclaim was by isolating
both active and inactive pages for asynchronous lumpy reclaim on
costly-high-order pages and for cheap-high-order when memory pressure is
high. However, if the system is under heavy pressure and there are dirty
pages, asynchronous IO may not be sufficient to reclaim a suitable page in
time.
This patch causes the caller to enter synchronous lumpy reclaim for
costly-high-order pages and for cheap-high-order pages when under memory
pressure.
Minchan.kim@gmail.com said:
Andy added synchronous lumpy reclaim with c661b078fd62abe06fd11fab4ac5e4eeafe26b6d. At that time, lumpy reclaim is
not agressive. His intension is just for high-order users.(above
PAGE_ALLOC_COSTLY_ORDER).
After some time, Rik added aggressive lumpy reclaim with 33c120ed2843090e2bd316de1588b8bf8b96cbde. His intention was to do lumpy
reclaim when high-order users and trouble getting a small set of
contiguous pages.
So we also have to add synchronous pageout for small set of contiguous
pages.
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <Minchan.kim@gmail.com> Reviewed-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wu Fengguang [Tue, 16 Jun 2009 22:31:38 +0000 (15:31 -0700)]
readahead: enforce full sync mmap readahead size
Now that we do readahead for sequential mmap reads, here is a simple
evaluation of the impacts, and one further optimization.
It's an NFS-root debian desktop system, readahead size = 60 pages.
The numbers are grabbed after a fresh boot into console.
approach pgmajfault RA miss ratio mmap IO count avg IO size(pages)
A 383 31.6% 383 11
B 225 32.4% 390 11
C 224 32.6% 307 13
case A: mmap sync/async readahead disabled
case B: mmap sync/async readahead enabled, with enforced full async readahead size
case C: mmap sync/async readahead enabled, with enforced full sync/async readahead size
or:
A = vanilla 2.6.30-rc1
B = A plus mmap readahead
C = B plus this patch
The numbers show that
- there are good possibilities for random mmap reads to trigger readahead
- 'pgmajfault' is reduced by 1/3, due to the _async_ nature of readahead
- case C can further reduce IO count by 1/4
- readahead miss ratios are not quite affected
The theory is
- readahead is _good_ for clustered random reads, and can perform
_better_ than readaround because they could be _async_.
- async readahead size is guaranteed to be larger than readaround
size, and they are _async_, hence will mostly behave better
However for B
- sync readahead size could be smaller than readaround size, hence may
make things worse by produce more smaller IOs
which will be fixed by this patch.
Final conclusion:
- mmap readahead reduced major faults by 1/3 and no obvious overheads;
- mmap io can be further reduced by 1/4 with this patch.
Wu Fengguang [Tue, 16 Jun 2009 22:31:36 +0000 (15:31 -0700)]
readahead: introduce context readahead algorithm
Introduce page cache context based readahead algorithm.
This is to better support concurrent read streams in general.
RATIONALE
---------
The current readahead algorithm detects interleaved reads in a _passive_ way.
Given a sequence of interleaved streams 1,1001,2,1002,3,4,1003,5,1004,1005,6,...
By checking for (offset == prev_offset + 1), it will discover the sequentialness
between 3,4 and between 1004,1005, and start doing sequential readahead for the
individual streams since page 4 and page 1005.
The context readahead algorithm guarantees to discover the sequentialness no
matter how the streams are interleaved. For the above example, it will start
sequential readahead since page 2 and 1002.
The trick is to poke for page @offset-1 in the page cache when it has no other
clues on the sequentialness of request @offset: if the current requenst belongs
to a sequential stream, that stream must have accessed page @offset-1 recently,
and the page will still be cached now. So if page @offset-1 is there, we can
take request @offset as a sequential access.
BENEFICIARIES
-------------
- strictly interleaved reads i.e. 1,1001,2,1002,3,1003,...
the current readahead will take them as silly random reads;
the context readahead will take them as two sequential streams.
- cooperative IO processes i.e. NFS and SCST
They create a thread pool, farming off (sequential) IO requests to different
threads which will be performing interleaved IO.
It was not easy(or possible) to reliably tell from file->f_ra all those
cooperative processes working on the same sequential stream, since they will
have different file->f_ra instances. And NFSD's file->f_ra is particularly
unusable, since their file objects are dynamically created for each request.
The nfsd does have code trying to restore the f_ra bits, but not satisfactory.
The new scheme is to detect the sequential pattern via looking up the page
cache, which provides one single and consistent view of the pages recently
accessed. That makes sequential detection for cooperative processes possible.
USER REPORT
-----------
Vladislav recommends the addition of context readahead as a result of his SCST
benchmarks. It leads to 6%~40% performance gains in various cases and achieves
equal performance in others. http://lkml.org/lkml/2009/3/19/239
OVERHEADS
---------
In theory, it introduces one extra page cache lookup per random read. However
the below benchmark shows context readahead to be slightly faster, wondering..
Randomly reading 200MB amount of data on a sparse file, repeat 20 times for
each block size. The average throughputs are:
original ra context ra gain
4K random reads: 65.561MB/s 65.648MB/s +0.1%
16K random reads: 124.767MB/s 124.951MB/s +0.1%
64K random reads: 162.123MB/s 162.278MB/s +0.1%
Wu Fengguang [Tue, 16 Jun 2009 22:31:30 +0000 (15:31 -0700)]
readahead: record mmap read-around states in file_ra_state
Mmap read-around now shares the same code style and data structure with
readahead code.
This also removes do_page_cache_readahead(). Its last user, mmap
read-around, has been changed to call ra_submit().
The no-readahead-if-congested logic is dumped by the way. Users will be
pretty sensitive about the slow loading of executables. So it's
unfavorable to disabled mmap read-around on a congested queue.
[akpm@linux-foundation.org: coding-style fixes] Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wu Fengguang [Tue, 16 Jun 2009 22:31:29 +0000 (15:31 -0700)]
readahead: enforce full readahead size on async mmap readahead
We need this in one particular case and two more general ones.
Now we do async readahead for sequential mmap reads, and do it with the
help of PG_readahead. For normal reads, PG_readahead is the sufficient
condition to do a sequential readahead. But unfortunately, for mmap
reads, there is a tiny nuisance:
Wu Fengguang [Tue, 16 Jun 2009 22:31:28 +0000 (15:31 -0700)]
readahead: sequential mmap readahead
Auto-detect sequential mmap reads and do readahead for them.
The sequential mmap readahead will be triggered when
- sync readahead: it's a major fault and (prev_offset == offset-1);
- async readahead: minor fault on PG_readahead page with valid readahead state.
The benefits of doing readahead instead of read-around:
- less I/O wait thanks to async readahead
- double real I/O size and no more cache hits
The single stream case is improved a little.
For 100,000 sequential mmap reads:
user system cpu total
(1-1) plain -mm, 128KB readaround: 3.224 2.554 48.40% 11.838
(1-2) plain -mm, 256KB readaround: 3.170 2.392 46.20% 11.976
(2) patched -mm, 128KB readahead: 3.117 2.448 47.33% 11.607
The patched (2) has smallest total time, since it has no cache hit overheads
and less I/O block time(thanks to async readahead). Here the I/O size
makes no much difference, since there's only one single stream.
Note that (1-1)'s real I/O size is 64KB and (1-2)'s real I/O size is 128KB,
since the half of the read-around pages will be readahead cache hits.
This is going to make _real_ differences for _concurrent_ IO streams.
Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 16 Jun 2009 22:31:25 +0000 (15:31 -0700)]
readahead: clean up and simplify the code for filemap page fault readahead
This shouldn't really change behavior all that much, but the single rather
complex function with read-ahead inside a loop etc is broken up into more
manageable pieces.
The behaviour is also less subtle, with the read-ahead being done up-front
rather than inside some subtle loop and thus avoiding the now unnecessary
extra state variables (ie "did_readaround" is gone).
Fengguang: the code split in fact fixed a bug reported by Pavel Levshin:
the PGMAJFAULT accounting used to be bypassed when MADV_RANDOM is set, in
which case the original code will directly jump to no_cached_page reading.
Cc: Pavel Levshin <lpk@581.spb.su> Cc: <wli@movementarian.org> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The readahead call scheme is error-prone in that it expects the call sites
to check for async readahead after doing a sync one. I.e.
if (!page)
page_cache_sync_readahead();
page = find_get_page();
if (page && PageReadahead(page))
page_cache_async_readahead();
This is because PG_readahead could be set by a sync readahead for the
_current_ newly faulted in page, and the readahead code simply expects one
more callback on the same page to start the async readahead. If the
caller fails to do so, it will miss the PG_readahead bits and never able
to start an async readahead.
Eliminate this insane constraint by piggy-backing the async part into the
current readahead window.
Now if an async readahead should be started immediately after a sync one,
the readahead logic itself will do it. So the following code becomes
valid: (the 'else' in particular)
if (!page)
page_cache_sync_readahead();
else if (PageReadahead(page))
page_cache_async_readahead();
Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wu Fengguang [Tue, 16 Jun 2009 22:31:19 +0000 (15:31 -0700)]
readahead: make mmap_miss an unsigned int
This makes the performance impact of possible mmap_miss wrap around to be
temporary and tolerable: i.e. MMAP_LOTSAMISS=100 extra readarounds.
Otherwise if ever mmap_miss wraps around to negative, it takes INT_MAX
cache misses to bring it back to normal state. During the time mmap
readaround will be _enabled_ for whatever wild random workload. That's
almost permanent performance impact.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Tue, 16 Jun 2009 22:31:18 +0000 (15:31 -0700)]
mm: consolidate init_mm definition
* create mm/init-mm.c, move init_mm there
* remove INIT_MM, initialize init_mm with C99 initializer
* unexport init_mm on all arches:
init_mm is already unexported on x86.
One strange place is some OMAP driver (drivers/video/omap/) which
won't build modular, but it's already wants get_vm_area() export.
Somebody should look there.
[akpm@linux-foundation.org: add missing #includes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peer reported:
| The bug is introduced from kernel 2.6.27, if E820 table reserve the memory
| above 4G in 32bit OS(BIOS-e820: 00000000fff80000 - 0000000120000000
| (reserved)), system will report Int 6 error and hang up. The bug is caused by
| the following code in drivers/firmware/memmap.c, the resource_size_t is 32bit
| variable in 32bit OS, the BUG_ON() will be invoked to result in the Int 6
| error. I try the latest 32bit Ubuntu and Fedora distributions, all hit this
| bug.
|======
|static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
| const char *type,
| struct firmware_map_entry *entry)
and it only happen with CONFIG_PHYS_ADDR_T_64BIT is not set.
it turns out we need to pass u64 instead of resource_size_t for that.
[akpm@linux-foundation.org: add comment] Reported-and-tested-by: Peer Chen <pchen@nvidia.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Tue, 16 Jun 2009 22:31:12 +0000 (15:31 -0700)]
time: move PIT_TICK_RATE to linux/timex.h
PIT_TICK_RATE is currently defined in four architectures, but in three
different places. While linux/timex.h is not the perfect place for it, it
is still a reasonable replacement for those drivers that traditionally use
asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency.
Note that for Alpha, the actual value changed from 1193182UL to 1193180UL.
This is unlikely to make a difference, and probably can only improve
accuracy. There was a discussion on the correct value of CLOCK_TICK_RATE
a few years ago, after which every existing instance was getting changed
to 1193182. According to the specification, it should be 1193181.818181...
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 15 Jun 2009 17:06:19 +0000 (10:06 -0700)]
Merge branch 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: Logic to move non pinned timers
timers: /proc/sys sysctl hook to enable timer migration
timers: Identifying the existing pinned timers
timers: Framework for identifying pinned timers
timers: allow deferrable timers for intervals tv2-tv5 to be deferred
Fix up conflicts in kernel/sched.c and kernel/timer.c manually
Linus Torvalds [Mon, 15 Jun 2009 16:58:50 +0000 (09:58 -0700)]
Merge branch 'timers-for-linus-clockevents' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-clockevents' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clockevent: export register_device and delta2ns
clockevents: tick_broadcast_device can become static
Linus Torvalds [Mon, 15 Jun 2009 16:58:33 +0000 (09:58 -0700)]
Merge branch 'timers-for-linus-clocksource' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-clocksource' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clocksource: prevent selection of low resolution clocksourse also for nohz=on
clocksource: sanity check sysfs clocksource changes
Linus Torvalds [Mon, 15 Jun 2009 16:32:52 +0000 (09:32 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (103 commits)
powerpc: Fix bug in move of altivec code to vector.S
powerpc: Add support for swiotlb on 32-bit
powerpc/spufs: Remove unused error path
powerpc: Fix warning when printing a resource_size_t
powerpc/xmon: Remove unused variable in xmon.c
powerpc/pseries: Fix warnings when printing resource_size_t
powerpc: Shield code specific to 64-bit server processors
powerpc: Separate PACA fields for server CPUs
powerpc: Split exception handling out of head_64.S
powerpc: Introduce CONFIG_PPC_BOOK3S
powerpc: Move VMX and VSX asm code to vector.S
powerpc: Set init_bootmem_done on NUMA platforms as well
powerpc/mm: Fix a AB->BA deadlock scenario with nohash MMU context lock
powerpc/mm: Fix some SMP issues with MMU context handling
powerpc: Add PTRACE_SINGLEBLOCK support
fbdev: Add PLB support and cleanup DCR in xilinxfb driver.
powerpc/virtex: Add ml510 reference design device tree
powerpc/virtex: Add Xilinx ML510 reference design support
powerpc/virtex: refactor intc driver and add support for i8259 cascading
powerpc/virtex: Add support for Xilinx PCI host bridge
...
Linus Torvalds [Mon, 15 Jun 2009 16:27:37 +0000 (09:27 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator/max1586: fix V3 gain calculation integer overflow
regulator/max1586: support increased V3 voltage range
regulator: lp3971 - fix driver link error when built-in.
LP3971 PMIC regulator driver (updated and combined version)
regulator: remove driver_data direct access of struct device
regulator: Set MODULE_ALIAS for regulator drivers
regulator: Support list_voltage for fixed voltage regulator
regulator: Move regulator drivers to subsys_initcall()
regulator: build fix for powerpc - renamed show_state
regulator: add userspace-consumer driver
Maxim 1586 regulator driver
Rusty Russell [Sat, 13 Jun 2009 05:20:15 +0000 (14:50 +0930)]
[IA64] fix compile error in arch/ia64/mm/extable.c
ad6561dffa17f17bb68d7207d422c26c381c4313 ("module: trim exception table on init
free.") put a bogus trim_init_extable() function into ia64 which didn't compile.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
Linus Torvalds [Mon, 15 Jun 2009 16:13:49 +0000 (09:13 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (22 commits)
nilfs2: support contiguous lookup of blocks
nilfs2: add sync_page method to page caches of meta data
nilfs2: use device's backing_dev_info for btree node caches
nilfs2: return EBUSY against delete request on snapshot
nilfs2: modify list of unsupported features in caveats
nilfs2: enable sync_page method
nilfs2: set bio unplug flag for the last bio in segment
nilfs2: allow future expansion of metadata read out via get info ioctl
NILFS2: Pagecache usage optimization on NILFS2
nilfs2: remove nilfs_btree_operations from btree mapping
nilfs2: remove nilfs_direct_operations from direct mapping
nilfs2: remove bmap pointer operations
nilfs2: remove useless b_low and b_high fields from nilfs_bmap struct
nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr function
nilfs2: move get block functions in bmap.c into btree codes
nilfs2: remove nilfs_bmap_delete_block
nilfs2: remove nilfs_bmap_put_block
nilfs2: remove header file for segment list operations
nilfs2: eliminate removal list of segments
nilfs2: add sufile function that can modify multiple segment usages
...
Philipp Zabel [Thu, 28 May 2009 19:00:03 +0000 (21:00 +0200)]
regulator/max1586: fix V3 gain calculation integer overflow
On Thu, May 28, 2009 at 10:59 AM, Mark Brown <broonie@opensource.wolfsonmicro.com> wrote:
> On Thu, May 28, 2009 at 07:15:16AM +0200, Philipp Zabel wrote:
>> The V3 regulator can be configured with an external resistor
>> connected to the feedback pin (R24 in the data sheet) to
>> increase the voltage range.
>>
>> For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum
>> V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency.
>>
>> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
>
> Looks good.
>
> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Thanks, but it turns out I hit a 32 bit integer overflow in
the gain calculation. I'd like to mend that with the following
patch. Now max_uV could be increased up to 4.294 V, enough to
charge LiPo cells.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Philipp Zabel [Thu, 28 May 2009 05:15:16 +0000 (07:15 +0200)]
regulator/max1586: support increased V3 voltage range
The V3 regulator can be configured with an external resistor
connected to the feedback pin (R24 in the data sheet) to
increase the voltage range.
For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum
V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Marek Szyprowski [Tue, 19 May 2009 05:33:55 +0000 (07:33 +0200)]
LP3971 PMIC regulator driver (updated and combined version)
This patch adds regulator drivers for National Semiconductors LP3971 PMIC.
This LP3971 PMIC controller has 3 DC/DC voltage converters and 5 low
drop-out (LDO) regulators. LP3971 PMIC controller uses I2C interface.
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
regulator: remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device. Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used. These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Mon, 27 Apr 2009 17:21:18 +0000 (18:21 +0100)]
regulator: Move regulator drivers to subsys_initcall()
Regulators need to be available early in init in order to allow them
to be available for consumers when requested. This is generally done
by registering them at subsys_initcall() time but not all regulator
drivers have done that. Convert these drivers to do so in order to
mimimise future support.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
regulator: build fix for powerpc - renamed show_state
This patch fixes the follwing build failure on powerpc:-
> Today's linux-next build (powerpc allyesconfig) failed like this:
>
> drivers/regulator/userspace-consumer.c:43: error: conflicting types
> for 'show_state'
> include/linux/sched.h:273: note: previous definition of 'show_state'
> was here
>
> Caused by commit 5defa2bce704ca4151cfe24e4297aa7797cafd22 ("regulator:
> add userspace-consumer driver") which I have reverted for today.
Mike Rapoport [Sun, 26 Apr 2009 13:49:39 +0000 (16:49 +0300)]
regulator: add userspace-consumer driver
The userspace-consumer driver allows control of voltage and current
regulator state from userspace. This is required for fine-grained
power management of devices that are completely controller by userspace
applications, e.g. a GPS transciever connected to a serial port.
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Robert Jarzmik [Thu, 23 Apr 2009 18:10:43 +0000 (20:10 +0200)]
Maxim 1586 regulator driver
The Maxim 1586 regulator is a voltage regulator with 2
voltage outputs, specially suitable for Marvell PXA
chips. One output is in the range of required VCC_CORE by
the PXA27x chips, the other in the VCC_USIM required as well
by PXA27x chips.
The chip is controlled through the I2C bus.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Jarek Poplawski [Mon, 15 Jun 2009 09:31:29 +0000 (02:31 -0700)]
ipv4: Fix fib_trie rebalancing
While doing trie_rebalance(): resize(), inflate(), halve() RCU free
tnodes before updating their parents. It depends on RCU delaying the
real destruction, but if RCU readers start after call_rcu() and before
parent update they could access freed memory.
It is currently prevented with preempt_disable() on the update side,
but it's not safe, except maybe classic RCU, plus it conflicts with
memory allocations with GFP_KERNEL flag used from these functions.
This patch explicitly delays freeing of tnodes by adding them to the
list, which is flushed after the update is finished.
Reported-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Frysinger [Sun, 14 Jun 2009 21:56:48 +0000 (22:56 +0100)]
ramfs: ignore unknown mount options
On systems where CONFIG_SHMEM is disabled, mounting tmpfs filesystems can
fail when tmpfs options are used. This is because tmpfs creates a small
wrapper around ramfs which rejects unknown options, and ramfs itself only
supports a tiny subset of what tmpfs supports. This makes it pretty hard
to use the same userspace systems across different configuration systems.
As such, ramfs should ignore the tmpfs options when tmpfs is merely a
wrapper around ramfs.
This used to work before commit c3b1b1cbf0 as previously, ramfs would
ignore all options. But now, we get:
ramfs: bad mount option: size=10M
mount: mounting mdev on /dev failed: Invalid argument
Another option might be to restore the previous behavior, where ramfs
simply ignored all unknown mount options ... which is what Hugh prefers.
Linus Torvalds [Sun, 14 Jun 2009 21:12:18 +0000 (14:12 -0700)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (53 commits)
.gitignore: ignore *.lzma files
kbuild: add generic --set-str option to scripts/config
kbuild: simplify argument loop in scripts/config
kbuild: handle non-existing options in scripts/config
kallsyms: generalize text region handling
kallsyms: support kernel symbols in Blackfin on-chip memory
documentation: make version fix
kbuild: fix a compile warning
gitignore: Add GNU GLOBAL files to top .gitignore
kbuild: fix delay in setlocalversion on readonly source
README: fix misleading pointer to the defconf directory
vmlinux.lds.h update
kernel-doc: cleanup perl script
Improve vmlinux.lds.h support for arch specific linker scripts
kbuild: fix headers_exports with boolean expression
kbuild/headers_check: refine extern check
kbuild: fix "Argument list too long" error for "make headers_check",
ignore *.patch files
Remove bashisms from scripts
menu: fix embedded menu presentation
...
Linus Torvalds [Sun, 14 Jun 2009 20:53:22 +0000 (13:53 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
mlx4_core: Don't double-free IRQs when falling back from MSI-X to INTx
IB/mthca: Don't double-free IRQs when falling back from MSI-X to INTx
IB/mlx4: Add strong ordering to local inval and fast reg work requests
IB/ehca: Remove superfluous bitmasks from QP control block
RDMA/cxgb3: Limit fast register size based on T3 limitations
RDMA/cxgb3: Report correct port state and MTU
mlx4_core: Add module parameter for number of MTTs per segment
IB/mthca: Add module parameter for number of MTTs per segment
RDMA/nes: Fix off-by-one bugs in reset_adapter_ne020() and init_serdes()
infiniband: Remove void casts
IB/ehca: Increment version number
IB/ehca: Remove unnecessary memory operations for userspace queue pairs
IB/ehca: Fall back to vmalloc() for big allocations
IB/ehca: Replace vmalloc() with kmalloc() for queue allocation
In addition to KT_DEAD which has limited support for diacriticals,
there is KT_DEAD2 that can support 256 criticals, so let's advertise
it in <linux/keyboard.h>.
This lets userland know abut the drivers/char/keyboard.c function
k_dead2, which supports more than the few trivial ones that k_dead
supports.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 14 Jun 2009 20:46:57 +0000 (13:46 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (25 commits)
atmel-mci: add MCI2 register definitions
atmel-mci: Integrate AT91 specific definition in header file
tmio_mmc: allow compilation for ASIC3
mmc_block: do not DMA to stack
sdhci: Print ADMA status and pointer on debug
tmio_mmc: fix clock setup
tmio_mmc: map SD control registers after enabling the MFD cell
tmio_mmc: correct probe return value for num_resources != 3
tmio_mmc: don't use set_irq_type
tmio_mmc: add bus_shift support
MFD,mmc: tmio_mmc: make HCLK configurable
mmc_spi: don't use EINVAL for possible transmission errors
cb710: more cleanup for the DEBUG case.
sdhci: platform driver for SDHCI
mxcmmc: remove frequency workaround
cb710: handle DEBUG define in Makefile
cb710: add missing parenthesis
cb710: fix printk format string
mmc: Driver for CB710/720 memory card reader (MMC part)
pxamci: add regulator support.
...
Linus Torvalds [Sun, 14 Jun 2009 20:45:49 +0000 (13:45 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: fix inverted wheel for bluetooth version of apple mighty mouse
HID: no more reinitializtion is needed in post_reset
HID: hidraw -- fix comment about accepted devices
HID: Multitouch support for the N-Trig touchscreen
HID: add new multitouch and digitizer contants
HID: autocentering support for Logitech Force 3D Pro
HID: fix hid-ff drivers so that devices work even without ff support
HID: force feedback support for SmartJoy PLUS PS2/USB adapter
HID: Wacom Graphire Bluetooth driver
HID: autocentering support for Logitech G25 Racing Wheel
Robin Getz [Mon, 10 Jul 2006 06:25:40 +0000 (06:25 +0000)]
kallsyms: support kernel symbols in Blackfin on-chip memory
The Blackfin arch has a discontiguous .text layout due to having on-chip
instruction memory and no virtual memory support. As such, we need to
add explicit checks for these additional .text regions.
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Linus Torvalds [Sun, 14 Jun 2009 20:42:43 +0000 (13:42 -0700)]
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
MAINTAINERS: EB110ATX is not ebsa110
MAINTAINERS: update Eric Miao's email address and status
fb: add support of LCD display controller on pxa168/910 (base layer)
[ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
[ARM] 5544/1: Trust PrimeCell resource sizes
[ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
[ARM] pxa/sharpsl_pm: drop set_irq_type calls
[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
[ARM] sa1100: remove unused collie_pm.c
[ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
[ARM] 5550/1: Add default configure file for w90p910 platform
[ARM] 5549/1: Add clock api for w90p910 platform.
[ARM] 5548/1: Add gpio api for w90p910 platform
[ARM] 5551/1: Add multi-function pin api for w90p910 platform.
[ARM] Make ARM_VIC_NR depend on ARM_VIC
[ARM] 5546/1: ARM PL022 SSP/SPI driver v3
ARM: OMAP4: SMP: Update defconfig for OMAP4430
ARM: OMAP4: SMP: Enable SMP support for OMAP4430
...
The Makefiles in the build directories use the internal make variable
MAKEFILE_LIST which is available from make 3.80 only. (The patch would be
valid back to 2.6.25)
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Roland Dreier [Sun, 14 Jun 2009 20:30:45 +0000 (13:30 -0700)]
mlx4_core: Don't double-free IRQs when falling back from MSI-X to INTx
When both MSI-X and legacy INTx fail to generate an interrupt, the
driver frees the MSI-X interrupts twice. Fix this by clearing the
have_irq flag for the MSI-X interrupts when they are freed the first
time. This is the same bug that was reported in ib_mthca by Yinghai
Lu <yhlu.kernel@gmail.com>.
Marcel Holtmann [Sun, 14 Jun 2009 13:24:44 +0000 (15:24 +0200)]
Bluetooth: Fix issue with uninitialized nsh.type in DTL-1 driver
The current build shows a warning with the DTL-1 driver:
CC [M] drivers/bluetooth/dtl1_cs.o
drivers/bluetooth/dtl1_cs.c: In function ‘dtl1_hci_send_frame’:
drivers/bluetooth/dtl1_cs.c:396: warning: ‘nsh.type’ may be used uninitialized in this function
Fix this by adding a proper error for unknown packet types.
Nicolas Pitre [Fri, 12 Jun 2009 02:09:29 +0000 (03:09 +0100)]
[ARM] 5545/2: add flush_kernel_dcache_page() for ARM
Without this, the default implementation is a no op which is completely
wrong with a VIVT cache, and usage of sg_copy_buffer() produces
unpredictable results.
Tested-by: Sebastian Andrzej Siewior <bigeasy@breakpoint.cc> CC: stable@kernel.org Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tom Goff [Sun, 14 Jun 2009 10:16:13 +0000 (03:16 -0700)]
PIM-SM: namespace changes
IPv4:
- make PIM register vifs netns local
- set the netns when a PIM register vif is created
- make PIM available in all network namespaces (if CONFIG_IP_PIMSM_V2)
by adding the protocol handler when multicast routing is initialized
IPv6:
- make PIM register vifs netns local
- make PIM available in all network namespaces (if CONFIG_IPV6_PIMSM_V2)
by adding the protocol handler when multicast routing is initialized
Signed-off-by: Tom Goff <thomas.goff@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Timo Teräs [Thu, 11 Jun 2009 19:38:02 +0000 (19:38 +0000)]
ipv4: update ARPD help text
Removed the statements about ARP cache size as this config option does
not affect it. The cache size is controlled by neigh_table gc thresholds.
Remove also expiremental and obsolete markings as the API originally
intended for arp caching is useful for implementing ARP-like protocols
(e.g. NHRP) in user space and has been there for a long enough time.
Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 11 Jun 2009 20:10:07 +0000 (20:10 +0000)]
net: use a deferred timer in rt_check_expire
For the sake of power saver lovers, use a deferrable timer to fire
rt_check_expire()
As some big routers cache equilibrium depends on garbage collection
done in time, we take into account elapsed time between two
rt_check_expire() invocations to adjust the amount of slots we have to
check.
Based on an initial idea and patch from Tero Kristo
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 12 Jun 2009 12:59:20 +0000 (12:59 +0000)]
ieee802154: fix kconfig bool/tristate muckup
menuconfig IEEE802154_DRIVERS is a bool that depends on tristate IEEE802154.
If the IEEE802154 symbol is 'm', the bool becomes 'y'.
This allows tristate symbols under IEEE802154_DRIVERS to be configured as
'y' and cause build problems.
Changing the menuconfig bool to a tristate fixes this.
drivers/built-in.o: In function `fake_scan_req':
fakehard.c:(.text+0x46d625): undefined reference to `ieee802154_nl_scan_confirm'
drivers/built-in.o: In function `fake_disassoc_req':
fakehard.c:(.text+0x46d66f): undefined reference to `ieee802154_nl_disassoc_confirm'
drivers/built-in.o: In function `fake_assoc_req':
fakehard.c:(.text+0x46d6be): undefined reference to `ieee802154_nl_assoc_confirm'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: David S. Miller <davem@davemloft.net>
The bonding device acts unlike all other Linux network device functions
in that it ignores case of device names. The developer must have come
from windows!
Cleanup the management of names and use standard routines where possible.
Flag places where bonding device still doesn't work right with network
namespaces.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The "expected_refcount" stuff in bonding sysfs module is a mistake.
Sysfs does proper refcounting, and it is okay to remove a bond device
that has some user process holding the file open.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Resolve some of the complaints from checkpatch, and remove "magic emacs format"
comments, and useless MODULE_SUPPORTED_DEVICE(). But should not
change actual code.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It is not safe to use a network device destructor that is a function in
the module, since it can be called after module is unloaded if sysfs
handle is open.
When eventually using netlink, the device cleanup code needs to be done
via uninit function.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid a unnecessary carrier state transistion that happens when device
is registered.
Lockdep works better if initialization is done before registration as well.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-eoan-kernel.git / log