The ref_scale_shutdown() kthread/function uses wait_event() to wait for
the refscale test to complete. However, although the read-side tests
are normally extremely fast, there is no law against specifying a very
large value for the refscale.loops module parameter or against having
a slow read-side primitive. Either way, this might well trigger the
hung-task timeout.
This commit therefore replaces those wait_event() calls with calls to
wait_event_idle(), which do not trigger the hung-task timeout.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Previously, ext4_get_group_info() would treat an invalid group number
as BUG(), since in theory it should never happen. However, if a
malicious attaker (or fuzzer) modifies the superblock via the block
device while it is the file system is mounted, it is possible for
s_first_data_block to get set to a very large number. In that case,
when calculating the block group of some block number (such as the
starting block of a preallocation region), could result in an
underflow and very large block group number. Then the BUG_ON check in
ext4_get_group_info() would fire, resutling in a denial of service
attack that can be triggered by root or someone with write access to
the block device.
For a quality of implementation perspective, it's best that even if
the system administrator does something that they shouldn't, that it
will not trigger a BUG. So instead of BUG'ing, ext4_get_group_info()
will call ext4_error and return NULL. We also add fallback code in
all of the callers of ext4_get_group_info() that it might NULL.
Also, since ext4_get_group_info() was already borderline to be an
inline function, un-inline it. The results in a next reduction of the
compiled text size of ext4 by roughly 2k.
If EXT4_MB_HINT_GOAL_ONLY is set, ext4_mb_regular_allocator will only
allocate blocks from ext4_mb_find_by_goal. Allow to find by goal in
ext4_mb_find_by_goal if EXT4_MB_HINT_GOAL_ONLY is set or allocation
with EXT4_MB_HINT_GOAL_ONLY set will always fail.
EXT4_MB_HINT_GOAL_ONLY is not used at all, so the problem is not
found for now.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Link: https://lore.kernel.org/r/20230303172120.3800725-3-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 5354b2af3406 ("ext4: allow ext4_get_group_info() to fail") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Smatch complains that:
arcfb_probe() warn: 'irq' from request_irq() not released on lines: 587.
Fix error handling in the arcfb_probe() function. If IO addresses are
not provided or framebuffer registration fails, the code will jump to
the err_addr or err_register_fb label to release resources.
If IRQ request fails, previously allocated resources will be freed.
Fixes: 1154ea7dcd8e ("[PATCH] Framebuffer driver for Arc LCD board") Signed-off-by: Zongjie Li <u202112089@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
For development and testing purposes, the i915.force_probe module
parameter and DRM_I915_FORCE_PROBE kconfig option allow probing of
devices that aren't supported by the driver.
The i915.force_probe module parameter is "unsafe" and setting it taints
the kernel. However, using the kconfig option does not.
Always taint the kernel when force probing a device that is not
supported.
v2: Drop "depends on EXPERT" to avoid build breakage (kernel test robot)
Fixes: 7ef5ef5cdead ("drm/i915: add force_probe module parameter to replace alpha_support") Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230504103508.1818540-1-jani.nikula@intel.com
(cherry picked from commit 3312bb4ad09ca6423bd4a5b15a94588a8962fb8e) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
There are new cases where we want to block i915 probe, such
as when experimenting or developing the new Xe driver.
But also, with the new hybrid cards, users or developers might
want to use i915 only on integrated and fully block the probe
of the i915 for the discrete. Or vice versa.
There are even older development and validation reasons,
like when you use some distro where the modprobe.blacklist is
not present.
But in any case, let's introduce a more granular control, but without
introducing yet another parameter, but using the existent force_probe
one.
Just by adding a ! in the begin of the id in the force_probe, like
in this case where we would block the probe for Alder Lake:
$ insmod i915.ko force_probe='!46a6'
v2: Take care of '*' and '!*' cases as pointed out by
Gustavo and Jani.
Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103194701.1492984-1-rodrigo.vivi@intel.com
Stable-dep-of: 79c901c93562 ("drm/i915: taint kernel when force probing unsupported devices") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
drm_dp_dsc_sink_max_slice_count() may return 0 if something goes
wrong on the part of the DSC sink and its DPCD register. This null
value may be later used as a divisor in intel_dsc_compute_params(),
which will lead to an error.
In the unlikely event that this issue occurs, fix it by testing the
return value of drm_dp_dsc_sink_max_slice_count() against zero.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't
obtained previously with intel_atomic_get_crtc_state, so we must check it
for NULLness here, just as in many other places, where we can't guarantee
that intel_atomic_get_crtc_state was called.
We are currently getting NULL ptr deref because of that, so this fix was
confirmed to help.
Fixes: 74a75dc90869 ("drm/i915/display: move plane prepare/cleanup to intel_atomic_plane.c") Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230505082212.27089-1-stanislav.lisovskiy@intel.com
(cherry picked from commit 1d5b09f8daf859247a1ea65b0d732a24d88980d8) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
A pair of pre-Xe registers were being included in the Xe capture list.
GuC was rejecting those as being invalid and logging errors about
them. So, stop doing it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Fixes: dce2bd542337 ("drm/i915/guc: Add Gen9 registers for GuC error state capture.") Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-2-John.C.Harrison@Intel.com
(cherry picked from commit b049132d61336f643d8faf2f6574b063667088cf) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
KCSAN found a data race around sk->sk_shutdown where unix_release_sock()
and unix_shutdown() update it under unix_state_lock(), OTOH unix_poll()
and unix_dgram_poll() read it locklessly.
We need to annotate the writes and reads with WRITE_ONCE() and READ_ONCE().
BUG: KCSAN: data-race in unix_poll / unix_release_sock
write to 0xffff88800d0f8aec of 1 bytes by task 264 on cpu 0:
unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631
unix_release+0x59/0x80 net/unix/af_unix.c:1042
__sock_release+0x7d/0x170 net/socket.c:653
sock_close+0x19/0x30 net/socket.c:1397
__fput+0x179/0x5e0 fs/file_table.c:321
____fput+0x15/0x20 fs/file_table.c:349
task_work_run+0x116/0x1a0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x72/0xdc
read to 0xffff88800d0f8aec of 1 bytes by task 222 on cpu 1:
unix_poll+0xa3/0x2a0 net/unix/af_unix.c:3170
sock_poll+0xcf/0x2b0 net/socket.c:1385
vfs_poll include/linux/poll.h:88 [inline]
ep_item_poll.isra.0+0x78/0xc0 fs/eventpoll.c:855
ep_send_events fs/eventpoll.c:1694 [inline]
ep_poll fs/eventpoll.c:1823 [inline]
do_epoll_wait+0x6c4/0xea0 fs/eventpoll.c:2258
__do_sys_epoll_wait fs/eventpoll.c:2270 [inline]
__se_sys_epoll_wait fs/eventpoll.c:2265 [inline]
__x64_sys_epoll_wait+0xcc/0x190 fs/eventpoll.c:2265
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
value changed: 0x00 -> 0x03
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 222 Comm: dbus-broker Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: 3c73419c09a5 ("af_unix: fix 'poll for write'/ connected DGRAM sockets") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
KCSAN found a data race of sk->sk_receive_queue->qlen where recvmsg()
updates qlen under the queue lock and sendmsg() checks qlen under
unix_state_sock(), not the queue lock, so the reader side needs
READ_ONCE().
BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_wait_for_peer
write (marked) to 0xffff888019fe7c68 of 4 bytes by task 49792 on cpu 0:
__skb_unlink include/linux/skbuff.h:2347 [inline]
__skb_try_recv_from_queue+0x3de/0x470 net/core/datagram.c:197
__skb_try_recv_datagram+0xf7/0x390 net/core/datagram.c:263
__unix_dgram_recvmsg+0x109/0x8a0 net/unix/af_unix.c:2452
unix_dgram_recvmsg+0x94/0xa0 net/unix/af_unix.c:2549
sock_recvmsg_nosec net/socket.c:1019 [inline]
____sys_recvmsg+0x3a3/0x3b0 net/socket.c:2720
___sys_recvmsg+0xc8/0x150 net/socket.c:2764
do_recvmmsg+0x182/0x560 net/socket.c:2858
__sys_recvmmsg net/socket.c:2937 [inline]
__do_sys_recvmmsg net/socket.c:2960 [inline]
__se_sys_recvmmsg net/socket.c:2953 [inline]
__x64_sys_recvmmsg+0x153/0x170 net/socket.c:2953
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
read to 0xffff888019fe7c68 of 4 bytes by task 49793 on cpu 1:
skb_queue_len include/linux/skbuff.h:2127 [inline]
unix_recvq_full net/unix/af_unix.c:229 [inline]
unix_wait_for_peer+0x154/0x1a0 net/unix/af_unix.c:1445
unix_dgram_sendmsg+0x13bc/0x14b0 net/unix/af_unix.c:2048
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:747
____sys_sendmsg+0x20e/0x620 net/socket.c:2503
___sys_sendmsg+0xc6/0x140 net/socket.c:2557
__sys_sendmmsg+0x11d/0x370 net/socket.c:2643
__do_sys_sendmmsg net/socket.c:2672 [inline]
__se_sys_sendmmsg net/socket.c:2669 [inline]
__x64_sys_sendmmsg+0x58/0x70 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
value changed: 0x0000000b -> 0x00000001
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 49793 Comm: syz-executor.0 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg
address, not offset") organized the stats counters for Ocelot chips, namely
the VSC7512 and VSC7514. A few of the counter offsets were incorrect, and
were caught by this warning:
WARNING: CPU: 0 PID: 24 at drivers/net/ethernet/mscc/ocelot_stats.c:909
ocelot_stats_init+0x1fc/0x2d8
reg 0x5000078 had address 0x220 but reg 0x5000079 has address 0x214,
bulking broken!
Fix these register offsets.
Fixes: d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset") Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Clearing the PBA bit from the driver is race prone and it may lead to
dropped interrupt events. This could potentially lead to the traffic
being completely halted.
Fixes: 5e8c5adf95f8 ("gve: DQO: Add core netdev features") Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Signed-off-by: Bailey Forrest <bcf@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Now sk->sk_shutdown is no longer a bitfield, we can add
standard READ_ONCE()/WRITE_ONCE() annotations to silence
KCSAN reports like the following:
BUG: KCSAN: data-race in tcp_disconnect / tcp_poll
write to 0xffff88814588582c of 1 bytes by task 3404 on cpu 1:
tcp_disconnect+0x4d6/0xdb0 net/ipv4/tcp.c:3121
__inet_stream_connect+0x5dd/0x6e0 net/ipv4/af_inet.c:715
inet_stream_connect+0x48/0x70 net/ipv4/af_inet.c:727
__sys_connect_file net/socket.c:2001 [inline]
__sys_connect+0x19b/0x1b0 net/socket.c:2018
__do_sys_connect net/socket.c:2028 [inline]
__se_sys_connect net/socket.c:2025 [inline]
__x64_sys_connect+0x41/0x50 net/socket.c:2025
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff88814588582c of 1 bytes by task 3374 on cpu 0:
tcp_poll+0x2e6/0x7d0 net/ipv4/tcp.c:562
sock_poll+0x253/0x270 net/socket.c:1383
vfs_poll include/linux/poll.h:88 [inline]
io_poll_check_events io_uring/poll.c:281 [inline]
io_poll_task_func+0x15a/0x820 io_uring/poll.c:333
handle_tw_list io_uring/io_uring.c:1184 [inline]
tctx_task_work+0x1fe/0x4d0 io_uring/io_uring.c:1246
task_work_run+0x123/0x160 kernel/task_work.c:179
get_signal+0xe64/0xff0 kernel/signal.c:2635
arch_do_signal_or_restart+0x89/0x2a0 arch/x86/kernel/signal.c:306
exit_to_user_mode_loop+0x6f/0xe0 kernel/entry/common.c:168
exit_to_user_mode_prepare+0x6c/0xb0 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x26/0x140 kernel/entry/common.c:297
do_syscall_64+0x4d/0xc0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x03 -> 0x00
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Fixes: 469aceddfa3e ("vlan: consolidate VLAN parsing code and limit max parsing depth") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
__condition is evaluated twice in sk_wait_event() macro.
First invocation is lockless, and reads can race with writes,
as spotted by syzbot.
BUG: KCSAN: data-race in sk_stream_wait_connect / tcp_disconnect
write to 0xffff88812d83d6a0 of 4 bytes by task 9065 on cpu 1:
tcp_disconnect+0x2cd/0xdb0
inet_shutdown+0x19e/0x1f0 net/ipv4/af_inet.c:911
__sys_shutdown_sock net/socket.c:2343 [inline]
__sys_shutdown net/socket.c:2355 [inline]
__do_sys_shutdown net/socket.c:2363 [inline]
__se_sys_shutdown+0xf8/0x140 net/socket.c:2361
__x64_sys_shutdown+0x31/0x40 net/socket.c:2361
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff88812d83d6a0 of 4 bytes by task 9040 on cpu 0:
sk_stream_wait_connect+0x1de/0x3a0 net/core/stream.c:75
tcp_sendmsg_locked+0x2e4/0x2120 net/ipv4/tcp.c:1266
tcp_sendmsg+0x30/0x50 net/ipv4/tcp.c:1484
inet6_sendmsg+0x63/0x80 net/ipv6/af_inet6.c:651
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
__sys_sendto+0x246/0x300 net/socket.c:2142
__do_sys_sendto net/socket.c:2154 [inline]
__se_sys_sendto net/socket.c:2150 [inline]
__x64_sys_sendto+0x78/0x90 net/socket.c:2150
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00000000 -> 0x00000068
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
do_recvmmsg() can write to sk->sk_err from multiple threads.
As said before, many other points reading or writing sk_err
need annotations.
Fixes: 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
read to 0xffff88813ea4db59 of 1 bytes by task 28222 on cpu 1:
netlink_recvmsg+0x3b4/0x730 net/netlink/af_netlink.c:2022
sock_recvmsg_nosec+0x4c/0x80 net/socket.c:1017
____sys_recvmsg+0x2db/0x310 net/socket.c:2718
___sys_recvmsg net/socket.c:2762 [inline]
do_recvmmsg+0x2e5/0x710 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00 -> 0x01
Fixes: 16b304f3404f ("netlink: Eliminate kmalloc in netlink dump operation.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3ce9
("bonding: add an option to specify a delay between peer notifications").
the bond->send_peer_notif will be num_peer_notif multiplied by
peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif
overflow easily. e.g.
ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000
To fix the overflow, let's set the send_peer_notif to u32 and limit
peer_notif_delay to 300s.
Reported-by: Liang Li <liali@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053 Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
First turn this BUG_ON into a WARN. I think it was triggered
via enable_hooks=1 flag.
When this flag is turned on, the conntrack hooks are registered
before nf_ct_hook pointer gets assigned.
This opens a short window where packets enter the conntrack machinery,
can have skb->_nfct set up and a subsequent kfree_skb might occur
before nf_ct_hook is set.
Call nf_conntrack_init_end() to set nf_ct_hook before we register the
pernet ops.
Fixes: ba3fbe663635 ("netfilter: nf_conntrack: provide modparam to always register conntrack hooks") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This reverts "netfilter: nf_tables: skip netdev events generated on netns removal".
The problem is that when a veth device is released, the veth release
callback will also queue the peer netns device for removal.
Its possible that the peer netns is also slated for removal. In this
case, the device memory is already released before the pre_exit hook of
the peer netns runs:
BUG: KASAN: slab-use-after-free in nf_hook_entry_head+0x1b8/0x1d0
Read of size 8 at addr ffff88812c0124f0 by task kworker/u8:1/45
Workqueue: netns cleanup_net
Call Trace:
nf_hook_entry_head+0x1b8/0x1d0
__nf_unregister_net_hook+0x76/0x510
nft_netdev_unregister_hooks+0xa0/0x220
__nft_release_hook+0x184/0x490
nf_tables_pre_exit_net+0x12f/0x1b0
..
Order is:
1. First netns is released, veth_dellink() queues peer netns device
for removal
2. peer netns is queued for removal
3. peer netns device is released, unreg event is triggered
4. unreg event is ignored because netns is going down
5. pre_exit hook calls nft_netdev_unregister_hooks but device memory
might be free'd already.
Fixes: 68a3765c659f ("netfilter: nf_tables: skip netdev events generated on netns removal") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Since the driver works in the "legacy" addressing mode, we need to write
to the expansion register (0x17) with bits 11:8 set to 0xf to properly
select the expansion register passed as argument.
Fixes: f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230508231749.1681169-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Initialize MAC_ONEUS_TIC_COUNTER register with correct value derived
from CSR clock, otherwise EEE is unstable on at least NXP i.MX8M Plus
and Micrel KSZ9131RNX PHY, to the point where not even ARP request can
be sent out.
i.MX 8M Plus Applications Processor Reference Manual, Rev. 1, 06/2021
11.7.6.1.34 One-microsecond Reference Timer (MAC_ONEUS_TIC_COUNTER)
defines this register as:
"
This register controls the generation of the Reference time (1 microsecond
tic) for all the LPI timers. This timer has to be programmed by the software
initially.
...
The application must program this counter so that the number of clock cycles
of CSR clock is 1us. (Subtract 1 from the value before programming).
For example if the CSR clock is 100MHz then this field needs to be programmed
to value 100 - 1 = 99 (which is 0x63).
This is required to generate the 1US events that are used to update some of
the EEE related counters.
"
The reset value is 0x63 on i.MX8M Plus, which means expected CSR clock are
100 MHz. However, the i.MX8M Plus "enet_qos_root_clk" are 266 MHz instead,
which means the LPI timers reach their count much sooner on this platform.
This is visible using a scope by monitoring e.g. exit from LPI mode on TX_CTL
line from MAC to PHY. This should take 30us per STMMAC_DEFAULT_TWT_LS setting,
during which the TX_CTL line transitions from tristate to low, and 30 us later
from low to high. On i.MX8M Plus, this transition takes 11 us, which matches
the 30us * 100/266 formula for misconfigured MAC_ONEUS_TIC_COUNTER register.
Configure MAC_ONEUS_TIC_COUNTER based on CSR clock, so that the LPI timers
have correct 1us reference. This then fixes EEE on i.MX8M Plus with Micrel
KSZ9131RNX PHY.
Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Harald Seiler <hws@denx.de> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin iMX8MP Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20230506235845.246105-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Add return value for dim_calc_stats. This is an indication for the
caller if curr_stats was assigned by the function. Avoid using
curr_stats uninitialized over {rdma/net}_dim, when no time delta between
samples. Coverity reported this potential use of an uninitialized
variable.
Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux") Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When a tick broadcast clockevent device is initialized for one shot mode
then tick_broadcast_setup_oneshot() OR's the periodic broadcast mode
cpumask into the oneshot broadcast cpumask.
This is required when switching from periodic broadcast mode to oneshot
broadcast mode to ensure that CPUs which are waiting for periodic
broadcast are woken up on the next tick.
But it is subtly broken, when an active broadcast device is replaced and
the system is already in oneshot (NOHZ/HIGHRES) mode. Victor observed
this and debugged the issue.
Then the OR of the periodic broadcast CPU mask is wrong as the periodic
cpumask bits are sticky after tick_broadcast_enable() set it for a CPU
unless explicitly cleared via tick_broadcast_disable().
That means that this sets all other CPUs which have tick broadcasting
enabled at that point unconditionally in the oneshot broadcast mask.
If the affected CPUs were already idle and had their bits set in the
oneshot broadcast mask then this does no harm. But for non idle CPUs
which were not set this corrupts their state.
On their next invocation of tick_broadcast_enable() they observe the bit
set, which indicates that the broadcast for the CPU is already set up.
As a consequence they fail to update the broadcast event even if their
earliest expiring timer is before the actually programmed broadcast
event.
If the programmed broadcast event is far in the future, then this can
cause stalls or trigger the hung task detector.
Avoid this by telling tick_broadcast_setup_oneshot() explicitly whether
this is the initial switch over from periodic to oneshot broadcast which
must take the periodic broadcast mask into account. In the case of
initialization of a replacement device this prevents that the broadcast
oneshot mask is modified.
There is a second problem with broadcast device replacement in this
function. The broadcast device is only armed when the previous state of
the device was periodic.
That is correct for the switch from periodic broadcast mode to oneshot
broadcast mode as the underlying broadcast device could operate in
oneshot state already due to lack of periodic state in hardware. In that
case it is already armed to expire at the next tick.
For the replacement case this is wrong as the device is in shutdown
state. That means that any already pending broadcast event will not be
armed.
This went unnoticed because any CPU which goes idle will observe that
the broadcast device has an expiry time of KTIME_MAX and therefore any
CPUs next timer event will be earlier and cause a reprogramming of the
broadcast device. But that does not guarantee that the events of the
CPUs which were already in idle are delivered on time.
Fix this by arming the newly installed device for an immediate event
which will reevaluate the per CPU expiry times and reprogram the
broadcast device accordingly. This is simpler than caching the last
expiry time in yet another place or saving it before the device exchange
and handing it down to the setup function. Replacement of broadcast
devices is not a frequent operation and usually happens once somewhere
late in the boot process.
Fixes: 9c336c9935cf ("tick/broadcast: Allow late registered device to enter oneshot mode") Reported-by: Victor Hassan <victor@allwinnertech.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/87pm7d2z1i.ffs@tglx Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Even when urgent BKOPS fails, the consumer will get stuck in runtime
suspend status. Like commit 1a5665fc8d7a ("scsi: ufs: core: WLUN suspend
SSU/enter hibern8 fail recovery"), trigger the error handler and return
-EBUSY to break the suspend.
Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun") Signed-off-by: Keoseong Park <keosung.park@samsung.com> Link: https://lore.kernel.org/r/20230425031721epcms2p5d4de65616478c967d466626e20c42a3a@epcms2p5 Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Should of_mdiobus_register() fail, a previous usb_get_dev() call should be
undone as in the .disconnect function.
Fixes: 04e37d92fbed ("net: phy: add marvell usb to mdio controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Fixes: 66e4c8d95008 ("net: warn if transport header was not set") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Fix kernel-doc warnings from the kernel test robot:
jornada720_ssp.c:24: warning: Function parameter or member 'jornada_ssp_lock' not described in 'DEFINE_SPINLOCK'
jornada720_ssp.c:24: warning: expecting prototype for arch/arm/mac(). Prototype was for DEFINE_SPINLOCK() instead
jornada720_ssp.c:34: warning: Function parameter or member 'byte' not described in 'jornada_ssp_reverse'
jornada720_ssp.c:57: warning: Function parameter or member 'byte' not described in 'jornada_ssp_byte'
jornada720_ssp.c:85: warning: Function parameter or member 'byte' not described in 'jornada_ssp_inout'
After commit 3fb16866b51d ("driver core: fw_devlink: Make cycle
detection more robust"), fw_devlink prints an error when consumer
devices don't have their fwnode set. This used to be ignored silently.
Set the fwnode mipi_dsi_device so fw_devlink can find them and properly
track their dependencies.
This fixes errors like this:
[ 0.334054] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with regulator-lcd-1v8
[ 0.346964] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with backlight-dsi
The fbdev test of IGT may write after EOF, which lead to out-of-bound
access for drm drivers with fbdev-generic. For example, run fbdev test
on a x86+ast2400 platform, with 1680x1050 resolution, will cause the
linux kernel hang with the following call trace:
The is because damage rectangles computed by
drm_fb_helper_memory_range_to_clip() function is not guaranteed to be
bound in the screen's active display area. Possible reasons are:
1) Buffers are allocated in the granularity of page size, for mmap system
call support. The shadow screen buffer consumed by fbdev emulation may
also choosed be page size aligned.
2) The DIV_ROUND_UP() used in drm_fb_helper_memory_range_to_clip()
will introduce off-by-one error.
For example, on a 16KB page size system, in order to store a 1920x1080
XRGB framebuffer, we need allocate 507 pages. Unfortunately, the size
1920*1080*4 can not be divided exactly by 16KB.
Note that userspace may still write to the invisiable area if a larger
buffer than width x stride is exposed. But it is not a big issue as
long as there still have memory resolve the access if not drafting so
far.
- Also limit the y1 (Daniel)
- keep fix patch it to minimal (Daniel)
- screen_size is page size aligned because of it need mmap (Thomas)
- Adding fixes tag (Thomas)
When skipping full modeset since the only state change was a front porch
change, the DC commit sequence requires extra checks to handle non
existant plane states being asked to be removed from context.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
On CPM, the RISC core is a lot more efficiant when doing transfers
in 16-bits chunks than in 8-bits chunks, but unfortunately the
words need to be byte swapped as seen in a previous commit.
So, for large tranfers with an even size, allocate a temporary tx
buffer and byte-swap data before and after transfer.
This change allows setting higher speed for transfer. For instance
on an MPC 8xx (CPM1 comms RISC processor), the documentation tells
that transfer in byte mode at 1 kbit/s uses 0.200% of CPM load
at 25 MHz while a word transfer at the same speed uses 0.032%
of CPM load. This means the speed can be 6 times higher in
word mode for the same CPM load.
For the time being, only do it on CPM1 as there must be a
trade-off between the CPM load reduction and the CPU load required
to byte swap the data.
For different reasons, fsl-spi driver performs bits_per_word
modifications for different reasons:
- On CPU mode, to minimise amount of interrupts
- On CPM/QE mode to work around controller byte order
For CPU mode that's done in fsl_spi_prepare_message() while
for CPM mode that's done in fsl_spi_setup_transfer().
Reunify all of it in fsl_spi_prepare_message(), and catch
impossible cases early through master's bits_per_word_mask
instead of returning EINVAL later.
BugLink: https://bugs.launchpad.net/bugs/2028580
This code no longer exists in mainline, because it was removed in
commit d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory
clearing") upstream.
However, rather than backport the full range of x86 memory clearing and
copying cleanups, fix the exception table annotation placement for the
final 'rep movsb' in clear_user_rep_good(): rather than pointing at the
actual instruction that did the user space access, it pointed to the
register move just before it.
That made sense from a code flow standpoint, but not from an actual
usage standpoint: it means that if user access takes an exception, the
exception handler won't actually find the instruction in the exception
tables.
As a result, rather than fixing it up and returning -EFAULT, it would
then turn it into a kernel oops report instead, something like:
which then looks like a filesystem bug rather than the incorrect
exception annotation that it is.
[ The alternative to this one-liner fix is to take the upstream series
that cleans this all up:
68674f94ffc9 ("x86: don't use REP_GOOD or ERMS for small memory copies") 20f3337d350c ("x86: don't use REP_GOOD or ERMS for small memory clearing") adfcf4231b8c ("x86: don't use REP_GOOD or ERMS for user memory copies")
* d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing") 3639a535587d ("x86: move stac/clac from user copy routines into callers") 577e6a7fd50d ("x86: inline the 'rep movs' in user copies for the FSRM case") 8c9b6a88b7e2 ("x86: improve on the non-rep 'clear_user' function") 427fda2c8a49 ("x86: improve on the non-rep 'copy_user' function")
* e046fe5a36a9 ("x86: set FSRS automatically on AMD CPUs that have FSRM") e1f2750edc4a ("x86: remove 'zerorest' argument from __copy_user_nocache()") 034ff37d3407 ("x86: rewrite '__copy_user_nocache' function")
with either the whole series or at a minimum the two marked commits
being needed to fix this issue ]
Reported-by: syzbot <syzbot+401145a9a237779feb26@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?extid=401145a9a237779feb26 Fixes: 0db7058e8e23 ("x86/clear_user: Make it faster") Cc: Borislav Petkov <bp@alien8.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
310e782a99c7 ("platform/x86/amd: pmc: Utilize SMN index 0 for driver probe")
switched to using amd_smn_read() which relies upon the misc PCI ID used
by DF function 3 being included in a table. The ID for model 78h is
missing in that table, so amd_smn_read() doesn't work.
Add the missing ID into amd_nb, restoring s2idle on this system.
[ bp: Simplify commit message. ]
Fixes: 310e782a99c7 ("platform/x86/amd: pmc: Utilize SMN index 0 for driver probe") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230427053338.16653-2-mario.limonciello@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In ext4_xattr_move_to_block(), the value of the extended attribute
which we need to move to an external block may be allocated by
kvmalloc() if the value is stored in an external inode. So at the end
of the function the code tried to check if this was the case by
testing entry->e_value_inum.
However, at this point, the pointer to the xattr entry is no longer
valid, because it was removed from the original location where it had
been stored. So we could end up calling kvfree() on a pointer which
was not allocated by kvmalloc(); or we could also potentially leak
memory by not freeing the buffer when it should be freed. Fix this by
storing whether it should be freed in a separate variable.
If a malicious fuzzer overwrites the ext4 superblock while it is
mounted such that the s_first_data_block is set to a very large
number, the calculation of the block group can underflow, and trigger
a BUG_ON check. Change this to be an ext4_warning so that we don't
crash the kernel.
When we enable MMP in ext4_multi_mount_protect() during mount or
remount, we end up calling sb_start_write() from write_mmp_block(). This
triggers lockdep warning because freeze protection ranks above s_umount
semaphore we are holding during mount / remount. The problem is harmless
because we are guaranteed the filesystem is not frozen during mount /
remount but still let's fix the warning by not grabbing freeze
protection from ext4_multi_mount_protect().
In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any
reason, it's best if we just fail as opposed to stumbling on,
especially if the failure is EFSCORRUPTED.
Cc: stable@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Normally the extended attributes in the inode body would have been
checked when the inode is first opened, but if someone is writing to
the block device while the file system is mounted, it's possible for
the inode table to get corrupted. Add bounds checking to avoid
reading beyond the end of allocated memory if this happens.
In no journal mode, ext4_finish_convert_inline_dir() can self-deadlock
by calling ext4_handle_dirty_dirblock() when it already has taken the
directory lock. There is a similar self-deadlock in
ext4_incvert_inline_data_nolock() for data files which we'll fix at
the same time.
The ext4_dirhash() will *almost* never fail, especially when the hash
tree feature was first introduced. However, with the addition of
support of encrypted, casefolded file names, that function can most
certainly fail today.
So make sure the callers of ext4_dirhash() properly check for
failures, and reflect the errors back up to their callers.
If there are failures while changing the mount options in
__ext4_remount(), we need to restore the old mount options.
This commit fixes two problem. The first is there is a chance that we
will free the old quota file names before a potential failure leading
to a use-after-free. The second problem addressed in this commit is
if there is a failed read/write to read-only transition, if the quota
has already been suspended, we need to renable quota handling.
Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230506142419.984260-2-tytso@mit.edu Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When ext4_iomap_overwrite_begin() calls ext4_iomap_begin() map blocks may
fail for some reason (e.g. memory allocation failure, bare disk write), and
later because "iomap->type ! = IOMAP_MAPPED" triggers WARN_ON(). When ext4
iomap_begin() returns an error, it is normal that the type of iomap->type
may not match the expectation. Therefore, we only determine if iomap->type
is as expected when ext4_iomap_begin() is executed successfully.
Ext4 has a filesystem wide lock protecting ext4_writepages() calls to
avoid races with switching of journalled data flag or inode format. This
lock can however cause a deadlock like:
CPU0 CPU1
ext4_writepages()
percpu_down_read(sbi->s_writepages_rwsem);
ext4_change_inode_journal_flag()
percpu_down_write(sbi->s_writepages_rwsem);
- blocks, all readers block from now on
ext4_do_writepages()
ext4_init_io_end()
kmem_cache_zalloc(io_end_cachep, GFP_KERNEL)
fs_reclaim frees dentry...
dentry_unlink_inode()
iput() - last ref =>
iput_final() - inode dirty =>
write_inode_now()...
ext4_writepages() tries to acquire sbi->s_writepages_rwsem
and blocks forever
Make sure we cannot recurse into filesystem reclaim from writeback code
to avoid the deadlock.
Reported-by: syzbot+6898da502aef574c5f8a@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/0000000000004c66b405fa108e27@google.com Fixes: c8585c6fcaf2 ("ext4: fix races between changing inode journal mode and ext4_writepages") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230504124723.20205-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When using cached extent stored in extent status tree in tree->cache_es
another process holding ei->i_es_lock for reading can be racing with us
setting new value of tree->cache_es. If the compiler would decide to
refetch tree->cache_es at an unfortunate moment, it could result in a
bogus in_range() check. Fix the possible race by using READ_ONCE() when
using tree->cache_es only under ei->i_es_lock for reading.
Cc: stable@kernel.org Reported-by: syzbot+4a03518df1e31b537066@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000d3b33905fa0fd4a6@google.com Suggested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230504125524.10802-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Replace
le16_to_cpu(sbi->s_es->s_desc_size)
with
sbi->s_desc_size
It reduces ext4's compiled text size, and makes the code more efficient
(we remove an extra indirect reference and a potential byte
swap on big endian systems), and there is no downside. It also avoids the
potential KASAN / syzkaller failure, as a bonus.
Acctually, blocks per group is 64, but block bitmap indicate at least has
128 blocks. Now, ext4_validate_block_bitmap() didn't check invalid block's
bitmap if set.
To resolve above issue, add check like fsck "Padding at end of block bitmap is
not set".
Cc: stable@kernel.org Reported-by: syzbot+68223fe9f6c95ad43bed@syzkaller.appspotmail.com Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230116020015.1506120-1-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Apparently despite it being marked inline, the compiler
may not inline __down_read_common() which makes it difficult
to identify the cause of lock contention, as the blocked
function in traceevents will always be listed as
__down_read_common().
So this patch adds __always_inline annotation to the common
function (as well as the inlined helper callers) to force it to
be inlined so the blocking function will be listed (via Wchan)
in traceevents.
Fixes: c995e638ccbb ("locking/rwsem: Fold __down_{read,write}*()") Reported-by: Tim Murray <timmurray@google.com> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Waiman Long <longman@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20230503023351.2832796-1-jstultz@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The operator precedence between << and & is wrong, leading to the high
byte being completely ignored. For example, with the 6.4 format, 32
becomes 0 and 24 becomes 8. Fix it, and remove the slightly confusing
and unnecessary DP_DSC_MAX_BITS_PER_PIXEL_HI_SHIFT macro while at it.
Fixes: 0575650077ea ("drm/dp: DRM DP helper/macros to get DP sink DSC parameters") Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Manasi Navare <navaremanasi@google.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230406134615.1422509-1-jani.nikula@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
[Why & How]
Previous Z8 watermark values were causing flickering and OTC underflow.
Updating Z8 watermark values based on the measurement.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
[Why & How]
Per HW team request, we're lowering the minimum Z8
residency time to 2000us. This enables Z8 support for additional
modes we were previously blocking like 2k>60hz
Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
[Why]
Block periods that are too short as they have the potential to
currently cause hangs in other firmware components on the system.
[How]
Update the threshold, mostly targeting a block of 4k and downscaling.
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320e1 ("drm/amd/display: Lowering min Z8 residency time") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
[Why]
Allows finer control and tuning for debug and profiling.
[How]
Add the debug option into DC. The default remains the same as before
for now.
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320e1 ("drm/amd/display: Lowering min Z8 residency time") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
[Why]
It's not supported in multi-display, but it is supported in 2nd eDP
screen only.
[How]
Remove multi display support, restrict number of planes for all
z-states support, but still allow Z8 if we're not using PWRSEQ0.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320e1 ("drm/amd/display: Lowering min Z8 residency time") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The skl+ scalers only sample 12 bits of PIPESRC so we can't
do any plane scaling at all when the pipe source size is >4k.
Make sure the pipe source size is also below the scaler's src
size limits. Might not be 100% accurate, but should at least be
safe. We can refine the limits later if we discover that recent
hw is less restricted.
Cc: stable@vger.kernel.org Tested-by: Ross Zwisler <zwisler@google.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8357 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 691248d4135fe3fae64b4ee0676bc96a7fd6950c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
By default the indirect state sampler data (border colors) are stored
in the same heap as the SAMPLER_STATE structure. For userspace drivers
that can be 2 different heaps (dynamic state heap & bindless sampler
state heap). This means that border colors have to copied in 2
different places so that the same SAMPLER_STATE structure find the
right data.
This change is forcing the indirect state sampler data to only be in
the dynamic state pool (more convenient for userspace drivers, they
only have to have one copy of the border colors). This is reproducing
the behavior of the Windows drivers.
BSpec: 46052
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230407093237.3296286-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 16fc9c08f0ec7b1c95f1ea4a16097acdb3fc943d) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The adreno_load_gpu() path is guarded by an error check on
adreno_load_fw(). This function is responsible for loading
Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it
does not take the vendor-signed ZAP blob into account.
By embedding the SQE (and GMU, if necessary) firmware into the
initrd/kernel, we can trigger and unfortunate path that would not bail
out early and proceed with gpu->hw_init(). That will fail, as the ZAP
loader path will not find the firmware and return back to
adreno_load_gpu().
This error path involves pm_runtime_put_sync() which then calls idle()
instead of suspend(). This is suboptimal, as it means that we're not
going through the clean shutdown sequence. With at least A619_holi, this
makes the GPU not wake up until it goes through at least one more
start-fail-stop cycle. The pm_runtime_put_sync that appears in the error
path actually does not guarantee that because of the earlier enabling of
runtime autosuspend.
Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown.
Test cases:
1. All firmware baked into kernel
2. error loading ZAP fw in initrd -> load from rootfs at DE start
Both succeed on A619_holi (SM6375) and A630 (SDM845).
Fixes: 0d997f95b70f ("drm/msm/adreno: fix runtime PM imbalance at gpu load") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/530001/ Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
To fully utilize the BT polling/refresh rate, a few input events
are sent together to reduce event delay. This causes issue to the
timestamp generated by input_sync since all the events in the same
packet would pretty much have the same timestamp. This patch inserts
time interval to the events by averaging the total time used for
sending the packet.
This decision was mainly based on observing the actual time interval
between each BT polling. The interval doesn't seem to be constant,
due to the network and system environment. So, using solutions other
than averaging doesn't end up with valid timestamps.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
All microcode runs a basic validation after it's been loaded. Each
IP block as part of init will run both.
Introduce a wrapper for request_firmware and amdgpu_ucode_validate.
This wrapper will also remap any error codes from request_firmware
to -ENODEV. This is so that early_init will fail if firmware couldn't
be loaded instead of the IP block being disabled.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini,
driver unconditionally disables ecc_irq which is only enabled on
those asics enabling sdma ecc. This will introduce a warning in
suspend cycle on those chips with sdma ip v4.0, while without
sdma ecc. So this patch correct this.
amdgpu_dpm_is_overdrive_supported is a common API across all
asics, so we should cast pp_handle into correct structure
under different power frameworks.
v2: using return directly to simplify code
v3: SI asic does not carry od_enabled member in pp_handle, and update Fixes tag
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2541 Fixes: eb4900aa4c49 ("drm/amdgpu: Fix kernel NULL pointer dereference in dpm functions") Suggested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
[Description]
- Due to bandwidth / arbitration issues at 200Mhz DCFCLK,
we want to enforce minimum 60us of prefetch to avoid
intermittent underflow issues
- Since 60us prefetch is already enforced for UCLK DPM0,
and many DCFCLK's > 200Mhz are mapped to UCLK DPM1, in
theory there should not be any UCLK DPM regressions by
enforcing greater prefetch
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
v1: Vmbo->shadow is used to back vram bo up when vram lost. So that we
should set shadow as vmbo->shadow to recover vmbo->bo
v2: Modify if(vmbo->shadow) shadow = vmbo->shadow as if(!vmbo->shadow)
continue;
Fixes: e18aaea733da ("drm/amdgpu: move shadow_list to amdgpu_bo_vm") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lin.Cao <lincao12@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert.
So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq
should be executed under such condition, otherwise, an amdgpu_irq_put
calltrace will occur.
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v11_0_hw_fini, which also leads to the call
trace.
As made mention of in commit 08c677cb0b43 ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af556104fa
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.
Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457 Fixes: f7d66fb2ea43 ("drm/amdgpu: cleanup scheduler job initialization v2") Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Currently, on a handful of ASICs. We allow the framebuffer for a given
plane to exist in either VRAM or GTT. However, if the plane's new
framebuffer is in a different memory domain than it's previous
framebuffer, flipping between them can cause the screen to flicker. So,
to fix this, don't perform an immediate flip in the aforementioned case.
Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Reviewed-by: Roman Li <Roman.Li@amd.com> Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
[Why]
Reading pipe_fuses from register may have invalid bits set, which may
affect the num_pipes erroneously.
[How]
Add read_pipes_fuses() call and filter bits based on expected number
of pipes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
[Why]
DPP Root clock optimization when combined with 4to1 MPC combine results
in the screen turning black.
This is because the DPPCLK is stopped during the middle of an
optimize_bandwidth sequence during commit_minimal_transition without
going through plane power down/power up.
[How]
The intent of a 0Hz DPP clock through update_clocks is to disable the
DTO. This differs from the behavior of stopping the DPPCLK entirely
(utilizing a 0Hz clock on some ASIC) so it's better to move this logic
to reside next to plane power up/power down where we gate the HUBP/DPP
DOMAIN.
The new sequence should be:
Power down: PG enabled -> RCO on
Power up: RCO off -> PG disabled
Rename power_on_plane to power_on_plane_resources to reflect the
actual operation that's occurring.
Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
[Why]
While scanning the top_pipe connections we can run into a case where
the bottom pipe is still connected to a top_pipe but with a NULL
plane_state.
[How]
Treat a NULL plane_state the same as the plane being invisible for
pipe cursor disable logic.
Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This is the logical place to put the backlight device, and it also
fixes a kernel crash if the MIPI host is removed. Previously the
backlight device would be unregistered twice when this happened - once
as a child of the MIPI host through `mipi_dsi_host_unregister`, and
once when the panel device is destroyed.
Fixes: 12a6cbd4f3f1 ("drm/panel: otm8009a: Use new backlight API") Signed-off-by: James Cowgill <james.cowgill@blaize.com> Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230412173450.199592-1-james.cowgill@blaize.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When support suspend/resume for loongson-eiointc, the syscore_ops
is registered twice in dual-bridges machines where there are two
eiointc IRQ domains. Repeated registration of an same syscore_ops
broke syscore_ops_list. Also, cpuhp_setup_state_nocalls is only
needed to call for once. So the patch will corret them.
Fixes: a90335c2dfb4 ("irqchip/loongson-eiointc: Add suspend/resume support") Cc: stable@vger.kernel.org Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230407083453.6305-4-lvjianmin@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In eiointc_acpi_init(), a *eiointc* node is passed into
acpi_get_vec_parent() instead of a required *NUMA* node (on some chip
like 3C5000L, a *NUMA* node means a *eiointc* node, but on some chip
like 3C5000, a *NUMA* node contains 4 *eiointc* nodes), and node in
struct acpi_vector_group is essentially a *NUMA* node, which will
lead to no parent matched for passed *eiointc* node. so the patch
adjusts code to use *NUMA* node for parameter node of
acpi_set_vec_parent/acpi_get_vec_parent.
Cc: stable@vger.kernel.org Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230407083453.6305-3-lvjianmin@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In pch_pic_parse_madt(), a NULL parent pointer will be
returned from acpi_get_vec_parent() for second pch-pic domain
related to second bridge while calling eiointc_acpi_init() at
first time, where the parent of it has not been initialized
yet, and will be initialized during second time calling
eiointc_acpi_init(). So, it's reasonable to return zero so
that failure of acpi_table_parse_madt() will be avoided, or else
acpi_cascade_irqdomain_init() will return and initialization of
followed pch_msi domain will be skipped.
Although it does not matter when pch_msi_parse_madt() returns
-EINVAL if no invalid parent is found, it's also reasonable to
return zero for that.
Cc: stable@vger.kernel.org Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230407083453.6305-2-lvjianmin@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When support suspend/resume for loongson-pch-pic, the syscore_ops
is registered twice in dual-bridges machines where there are two
pch-pic IRQ domains. Repeated registration of an same syscore_ops
broke syscore_ops_list, so the patch will corret it.
Fixes: 1ed008a2c331 ("irqchip/loongson-pch-pic: Add suspend/resume support") Cc: stable@vger.kernel.org Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230407083453.6305-5-lvjianmin@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
For dual-bridges scenario, pch_pic_acpi_init() will be called
in following path:
cpuintc_acpi_init
acpi_cascade_irqdomain_init(in cpuintc driver)
acpi_table_parse_madt
eiointc_parse_madt
eiointc_acpi_init /* this will be called two times
correspondingto parsing two
eiointc entries in MADT under
dual-bridges scenario*/
acpi_cascade_irqdomain_init(in eiointc driver)
acpi_table_parse_madt
pch_pic_parse_madt
pch_pic_acpi_init /* this will be called depend
on valid parent IRQ domain
handle for one or two times
corresponding to parsing
two pchpic entries in MADT
druring calling
eiointc_acpi_init() under
dual-bridges scenario*/
During the first eiointc_acpi_init() calling, the
pch_pic_acpi_init() will be called just one time since only
one valid parent IRQ domain handle will be found for current
eiointc IRQ domain.
During the second eiointc_acpi_init() calling, the
pch_pic_acpi_init() will be called two times since two valid
parent IRQ domain handles will be found. So in pch_pic_acpi_init(),
we must have a reasonable way to prevent from creating second same
pch_pic IRQ domain.
The patch matches gsi base information in created pch_pic IRQ
domains to check if the target domain has been created to avoid the
bug mentioned above.
Cc: stable@vger.kernel.org Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230407083453.6305-6-lvjianmin@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>