Paul Burton [Fri, 25 Nov 2016 18:46:09 +0000 (18:46 +0000)]
MIPS: WARN_ON invalid DMA cache maintenance, not BUG_ON
If a driver causes DMA cache maintenance with a zero length then we
currently BUG and kill the kernel. As this is a scenario that we may
well be able to recover from, WARN & return in the condition instead.
Alban Bedel [Mon, 13 Feb 2017 22:25:46 +0000 (23:25 +0100)]
MIPS: ath79: Fix the USB PHY reset names
The binding for the USB PHY went thru before the driver. However the
new version of the driver now use the PHY core support for reset, and
this expect the reset to be named "phy". So remove the "usb-" prefix
from the the reset names.
Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/15282/ Cc: linux-kernel@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org
There is an additional MIIM (MDIO) bus in this SoC so let's declare it
in the dtsi.
This bus requires GPIO 14 and 15 pins that need to be muxed. There is no
support for internal PHY reset on this bus on the contrary of MIIM0 so
there is only one register address space and not two.
MIPS: mscc: ocelot: fix length of memory address space for MIIM
The length of memory address space for MIIM0 is from 0x7107009c to
0x710700bf included which is 36 bytes long in decimal, or 0x24 bytes in
hexadecimal and not 0x36.
The ar724x pci driver expects the PCIe controller to be brought out of
reset by the bootloader.
At least the AVM Fritz 300E bootloader doesn't take care of releasing
the different PCIe controller related resets which causes an endless
hang as soon as either the PCIE Reset register (0x180f0018) or the PCI
Application Control register (0x180f0000) is read from.
Do the full "PCIE Root Complex Initialization Sequence" if the PCIe
host controller is still in reset during probing.
The QCA u-boot sleeps 10ms after the PCIE Application Control bit is
set to ready. It has been shown that 10ms might not be enough time if
PCIe should be used right after setting the bit. During my tests it
took up to 20ms till the link was up. Giving the link up to 100ms
should work for all cases.
Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19916/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org
Steven J. Hill [Tue, 5 Jun 2018 05:24:51 +0000 (00:24 -0500)]
MIPS: Octeon: Remove extern declarations.
Get rid of extern declarations in .c functions and included
the necessary header file. Also remove unused UART declares.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19477/ Cc: linux-mips@linux-mips.org
Matt Redfearn [Wed, 23 May 2018 13:39:59 +0000 (14:39 +0100)]
MIPS: memset.S: Add comments to fault fixup handlers
It is not immediately obvious what the expected inputs to these fault
handlers is and how they calculate the number of unset bytes. Having
stared deeply at this in order to fix some corner cases, add some
comments to assist those who follow.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19339/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <linux-mips@linux-mips.org> Cc: <linux-kernel@vger.kernel.org>
Matt Redfearn [Wed, 23 May 2018 13:39:58 +0000 (14:39 +0100)]
MIPS: memset.S: Fix byte_fixup for MIPSr6
The __clear_user function is defined to return the number of bytes that
could not be cleared. From the underlying memset / bzero implementation
this means setting register a2 to that number on return. Currently if a
page fault is triggered within the MIPSr6 version of setting of initial
unaligned bytes, the value loaded into a2 on return is meaningless.
During the MIPSr6 version of the initial unaligned bytes block, register
a2 contains the number of bytes to be set beyond the initial unaligned
bytes. The t0 register is initally set to the number of unaligned bytes
- STORSIZE, effectively a negative version of the number of unaligned
bytes. This is then incremented before each byte is saved.
The label .Lbyte_fixup\@ is jumped to on page fault. Currently the value
in a2 is incorrectly replaced by 0 - t0 + 1, effectively the number of
unaligned bytes remaining. This leads to the failures being reported by
the following test code:
static int __init test_clear_user(void)
{
int j, k;
Which reports:
[ 3.965439] Testing clear_user
[ 3.973169] clear_user (NULL 8) returned 6
[ 3.976782] clear_user (NULL 9) returned 6
[ 3.980390] clear_user (NULL 10) returned 6
[ 3.984052] clear_user (NULL 11) returned 6
[ 3.987524] clear_user (NULL 12) returned 6
Fix this by subtracting t0 from a2 (rather than $0), effectivey giving:
unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1
a2 = a2 - t0 + 1
This fixes the value returned from __clear user when the number of bytes
to set is > LONGSIZE and the address is invalid and unaligned.
Unfortunately, this breaks the fixup handling for unaligned bytes after
the final long, where register a2 still contains the number of bytes
remaining to be set and the t0 register is to 0 - the number of
unaligned bytes remaining.
Because t0 is now is now subtracted from a2 rather than 0, the number of
bytes unset is reported incorrectly:
static int __init test_clear_user(void)
{
char *test;
int j, k;
pr_info("\n\n\nTesting clear_user\n");
test = vmalloc(PAGE_SIZE);
Paul Burton [Mon, 12 Jun 2017 18:54:23 +0000 (11:54 -0700)]
MIPS: Hardcode cpu_has_* where known at compile time due to ISA
Many architectural features have over time moved from being optional to
either be required or removed by newer architecture releases. This means
that in many cases we can know at compile time whether a feature will be
supported or not purely due to the knowledge we have about the ISA the
kernel build is targeting.
This patch introduces a bunch of utility macros for checking for
supported options, ASEs & combinations of those with ISA revisions. It
then makes use of these in the default definitions of cpu_has_* macros.
The result is that many of the macros become compile-time constant,
allowing more optimisation opportunities for the compiler - particularly
with kernels built for later ISA revisions.
To demonstrate the effect of this patch, the following table shows the
size in bytes of the kernel binary as reported by scripts/bloat-o-meter
for v4.12-rc4 maltasmvp_defconfig kernels with & without this patch. A
variant of maltasmvp_defconfig with CONFIG_CPU_MIPS32_R6 selected is
also shown, to demonstrate that MIPSr6 systems benefit more due to extra
features becoming required by that architecture revision. Builds of
pistachio_defconfig are also shown, as although this is a MIPSr2
platform it doesn't hardcode any features in a machine-specific
cpu-feature-overrides.h, which allows it to gain more from this patch
than the equivalent Malta r2 build.
MIPS: jz4780: DTS: Probe the spi-gpio driver from devicetree
Make use of the spi-gpio driver to provide SPI support on the Ingenic
JZ4780 SoC using the pins that can be used with the SSI0 device as
GPIOs, until such time as we have support for the Ingenic SPI/SSI
controller.
[paul.burton@mips.com: Rewrite commit message.]
Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19489/ Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Thomas Petazzoni [Tue, 24 Jul 2018 11:52:08 +0000 (13:52 +0200)]
mips: use asm-generic version of msi.h
This is necessary to be able to include <linux/msi.h> when
CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled. Without this, a build with
CONFIG_GENERIC_MSI_IRQ_DOMAIN fails with:
In file included from include/linux/kvm_host.h:20:0,
from arch/mips/kernel/asm-offsets.c:24:
>> include/linux/msi.h:197:10: fatal error: asm/msi.h: No such file or directory
#include <asm/msi.h>
^~~~~~~~~~~
compilation terminated.
make[2]: *** [arch/mips/kernel/asm-offsets.s] Error 1
make[2]: Target '__build' not remade because of errors.
make[1]: *** [prepare0] Error 2
make[1]: Target 'prepare' not remade because of errors.
make: *** [sub-make] Error 2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19986/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Hanna Hawa <hannah@marvell.com>
Paul Cercueil [Sun, 8 Jul 2018 15:07:12 +0000 (17:07 +0200)]
MIPS: jz4740: Bump zload address
Having the zload address at 0x8060.0000 means the size of the
uncompressed kernel cannot be bigger than around 6 MiB, as it is
deflated at address 0x8001.0000.
This limit is too small; a kernel with some built-in drivers and things
like debugfs enabled will already be over 6 MiB in size, and so will
fail to extract properly.
To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000.
This is fine, as all the boards featuring Ingenic JZ SoCs have at least
32 MiB of RAM, and use u-boot or compatible bootloaders which won't
hardcode the load address but read it from the uImage's header.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19787/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
MIPS: Change definition of cpu_relax() for Loongson-3
Linux expects that if a CPU modifies a memory location, then that
modification will eventually become visible to other CPUs in the system.
Loongson 3 CPUs include a Store Fill Buffer (SFB) which sits between a
core & its L1 data cache, queueing memory accesses & allowing for faster
forwarding of data from pending stores to younger loads from the core.
Unfortunately the SFB prioritizes loads such that a continuous stream of
loads may cause a pending write to be buffered indefinitely. This is
problematic if we end up with 2 CPUs which each perform a store that the
other polls for - one or both CPUs may end up with their stores buffered
in the SFB, never reaching cache due to the continuous reads from the
poll loop. Such a deadlock condition has been observed whilst running
qspinlock code.
This patch changes the definition of cpu_relax() to smp_mb() for
Loongson-3, forcing a flush of the SFB on SMP systems which will cause
any pending writes to make it as far as the L1 caches where they will
become visible to other CPUs. If the kernel is not compiled for SMP
support, this will expand to a barrier() as before.
This workaround matches that currently implemented for ARM when
CONFIG_ARM_ERRATA_754327=y, which was introduced by commit 534be1d5a2da
("ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore").
Although the workaround is only required when the Loongson 3 SFB
functionality is enabled, and we only began explicitly enabling that
functionality in v4.7 with commit 1e820da3c9af ("MIPS: Loongson-3:
Introduce CONFIG_LOONGSON3_ENHANCEMENT"), existing or future firmware
may enable the SFB which means we may need the workaround backported to
earlier kernels too.
[paul.burton@mips.com:
- Reword commit message & comment.
- Limit stable backport to v3.15+ where we support Loongson 3 CPUs.]
This macro substitution is the shortcut to map cacheable IO memory
with coherent and write-back attributes. Since it is entirely unused
by kernel, lets just remove it.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Suggested-by: Christoph Hellwig <hch@infradead.org>
Patchwork: https://patchwork.linux-mips.org/patch/19937/ CC: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: Sergey.Semin@t-platforms.ru Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Define an NT_MIPS_FP_MODE core file note and implement a corresponding
regset holding the state handled by PR_SET_FP_MODE and PR_GET_FP_MODE
prctl(2) requests. This lets debug software correctly interpret the
contents of floating-point general registers both in live debugging and
in core files, and also switch floating-point modes of a live process.
[paul.burton@mips.com:
- Changed NT_MIPS_FP_MODE to 0x801 to match first nibble of
NT_MIPS_DSP, which was also changed to avoid a conflict.]
Signed-off-by: Maciej W. Rozycki <macro@mips.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19331/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Define an NT_MIPS_DSP core file note type and implement a corresponding
regset holding the DSP ASE register context, following the layout of the
`mips_dsp_state' structure, except for the DSPControl register stored as
a 64-bit rather than 32-bit quantity in a 64-bit note.
The lack of DSP ASE register saving to core files can be considered a
design flaw with commit e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP
ASE."), leading to an incomplete state being saved. Consequently no DSP
ASE regset has been created with commit 7aeb753b5353 ("MIPS: Implement
task_user_regset_view."), when regset support was added to the MIPS
port.
Additionally there is no way for ptrace(2) to correctly access the DSP
accumulator registers in n32 processes with the existing interfaces.
This is due to 32-bit truncation of data passed with PTRACE_PEEKUSR and
PTRACE_POKEUSR requests, which cannot be avoided owing to how the data
types for ptrace(3) have been defined. This new NT_MIPS_DSP regset
fills the missing interface gap.
[paul.burton@mips.com:
- Change NT_MIPS_DSP to 0x800 to avoid conflict with NT_VMCOREDD
introduced by commit 2724273e8fd0 ("vmcore: add API to collect
hardware dump in second kernel").
- Drop stable tag. Whilst I agree the lack of this functionality can
be considered a flaw in earlier DSP ASE support, it's still new
functionality which doesn't meet up to the requirements set out in
Documentation/process/stable-kernel-rules.rst.]
Signed-off-by: Maciej W. Rozycki <macro@mips.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
References: 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
Patchwork: https://patchwork.linux-mips.org/patch/19330/ Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-fsdevel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
MIPS: Correct the 64-bit DSP accumulator register size
Use the `unsigned long' rather than `__u32' type for DSP accumulator
registers, like with the regular MIPS multiply/divide accumulator and
general-purpose registers, as all are 64-bit in 64-bit implementations
and using a 32-bit data type leads to contents truncation on context
saving.
Update `arch_ptrace' and `compat_arch_ptrace' accordingly, removing
casts that are similarly not used with multiply/divide accumulator or
general-purpose register accesses.
Signed-off-by: Maciej W. Rozycki <macro@mips.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.")
Patchwork: https://patchwork.linux-mips.org/patch/19329/ Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-fsdevel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 2.6.15+
binfmt_elf: Respect error return from `regset->active'
The regset API documented in <linux/regset.h> defines -ENODEV as the
result of the `->active' handler to be used where the feature requested
is not available on the hardware found. However code handling core file
note generation in `fill_thread_core_info' interpretes any non-zero
result from the `->active' handler as the regset requested being active.
Consequently processing continues (and hopefully gracefully fails later
on) rather than being abandoned right away for the regset requested.
Fix the problem then by making the code proceed only if a positive
result is returned from the `->active' handler.
Signed-off-by: Maciej W. Rozycki <macro@mips.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 4206d3aa1978 ("elf core dump: notes user_regset")
Patchwork: https://patchwork.linux-mips.org/patch/19332/ Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-fsdevel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
prom_putchar() is used centrally in early printk infrastructure therefore
at least MIPS should agree on the function return type.
[paul.burton@mips.com:
- Include linux/types.h in asm/setup.h to gain the bool typedef before
we start include asm/setup.h elsewhere.
- Include asm/setup.h in all files that use or define prom_putchar().
- Also standardise on signed rather than unsigned char argument.]
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19842/ Cc: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jonas Gorski <jonas.gorski@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com>
Joshua Kinard [Sun, 19 Nov 2017 04:00:51 +0000 (23:00 -0500)]
MIPS: Cleanup R10000_LLSC_WAR logic in atomic.h
This patch reduces down the conditionals in MIPS atomic code that deal
with a silicon bug in early R10000 cpus that required a workaround of
a branch-likely instruction following a store-conditional in order to
to guarantee the whole ll/sc sequence is atomic. As the only real
difference is a branch-likely instruction (beqzl) over a standard
branch (beqz), the conditional is reduced down to a single preprocessor
check at the top to pick the required instruction.
This requires writing the uses in assembler, thus we discard the
non-R10000 case that uses a mixture of a C do...while loop with
embedded assembler that was added back in commit 7837314d141c ("MIPS:
Get rid of branches to .subsections."). A note found in the git log
for commit 5999eca25c1f ("[MIPS] Improve branch prediction in ll/sc
atomic operations.") is also addressed.
The macro definition for the branch instruction and the code comment
derives from a patch sent in earlier by Paul Burton for various cmpxchg
cleanups.
[paul.burton@mips.com:
- Minor whitespace fix for checkpatch.]
Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/17736/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <james.hogan@mips.com> Cc: "Maciej W. Rozycki" <macro@mips.com> Cc: linux-mips@linux-mips.org
Joshua Kinard [Sun, 19 Nov 2017 03:29:56 +0000 (22:29 -0500)]
MIPS: Fix delay slot bug in `atomic*_sub_if_positive' for R10000_LLSC_WAR
This patch fixes an old bug in MIPS ll/sc atomics, in the
`atomic_sub_if_positive' and `atomic64_sub_if_positive' functions, for
the R10000_LLSC_WAR case where the result of the subu/dsubu instruction
would potentially not be made available to the sc/scd instruction due
to being in the delay-slot of the branch-likely (beqzl) instruction.
This also removes the need for the `noreorder' directive, allowing GAS
to use delay slot scheduling as needed.
The same fix is also applied to the standard branch (beqz) case in
preparation for a follow-up patch that will cleanup/merge the
R10000_LLSC_WAR and non-R10K sections together.
Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Tested-by: Joshua Kinard <kumba@gentoo.org>
Patchwork: https://patchwork.linux-mips.org/patch/17735/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <james.hogan@mips.com> Cc: "Maciej W. Rozycki" <macro@mips.com> Cc: linux-mips@linux-mips.org
mips/jazz: provide missing dma_mask/coherent_dma_mask
Commit 205e1b7f51e4 ("dma-mapping: warn when there is no
coherent_dma_mask") introduced a warning, if a device is missing a
coherent_dma_mask. ESP and sonic are using dma mapping functions, so
they need dma masks.
[paul.burton@mips.com:
- Wrap commit message.]
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19828/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Adaptive ioremap_wc() method is now available as of commit 9748e33e26c6
("mips: mm: Create UCA-based ioremap_wc() method"). We can use it to
obtain UnCached Accelerated (UCA) mappings safely on all MIPS systems,
and so we don't need the MIPS-specific ioremap_uncached_accelerated()
any longer. This macro hard-coded the UCA Cache Coherency Attribute
(CCA) in a manner that isn't safe for kernels that may run on different
CPUs, and it is also entirely unused so we can trivially remove it.
[paul.burton@mips.com:
- Reword the commit message a little.
- Remove CC stable.]
Modern MIPS cores (like P5600/6600, M5150/6520, end so on) which
got L2-cache on chip also can enable a special type Cache-Coherency
attribute (CCA) named UnCached Accelerated attribute (UCA). In this
way uncached accelerated accesses are treated the same way as
non-accelerated uncached accesses, but uncached stores are gathered
together for more efficient bus utilization. So to speak this CCA
enables uncached transactions to better utilize bus bandwidth via
burst transactions.
This is exactly why ioremap_wc() method has been introduced in Linux.
Alas MIPS-platform code hasn't implemented it so far, instead default
one has been used which was an alias to ioremap_nocache. In order to
fix this we added MIPS-specific ioremap_wc() macro substituted by
generic __ioremap_mode() method call with writecombine CPU-info
field passed. It shall create real ioremap_wc() method if CPU-cache
supports UCA feature and fall-back to _CACHE_UNCACHED attribute
if one doesn't. Additionally platform-specific io.h shall declare
ARCH_HAS_IOREMAP_WC macro as indication of architectural definition
of ioremap_wc() (similar to x86/powerpc).
[paul.burton@mips.com:
- Remove CC stable, this is new functionality.]
Steven J. Hill [Tue, 3 Jul 2018 21:44:25 +0000 (16:44 -0500)]
MIPS: Octeon: Simplify CIU register functions.
Collapse and simplify switch statements in functions.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19713/ Cc: linux-mips@linux-mips.org Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Steven J. Hill [Tue, 3 Jul 2018 21:44:24 +0000 (16:44 -0500)]
MIPS: Octeon: Create simple macro for CIU registers.
Create new CVMX_CIU_ADDR macro to improve readability.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19712/ Cc: linux-mips@linux-mips.org Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Steven J. Hill [Tue, 3 Jul 2018 21:44:23 +0000 (16:44 -0500)]
MIPS: Octeon: Remove all unused CIU macros.
Get rid of all unused CIU macros and sort them. Verified with
'make allyesconfig' build test.
[paul.burton@mips.com:
- Also checked via convoluted grep invocation for use of all removed
macros within arch/mips/ & drivers/.]
Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19710/ Cc: linux-mips@linux-mips.org Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Steven J. Hill [Tue, 3 Jul 2018 21:44:22 +0000 (16:44 -0500)]
MIPS: Octeon: Convert CIU types to use bitfields.
Convert remaining structures to use __BITFIELD_FIELD macro. Also
straighten up the description text and whitespace.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19709/ Cc: linux-mips@linux-mips.org Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Steven J. Hill [Tue, 3 Jul 2018 21:44:21 +0000 (16:44 -0500)]
MIPS: Octeon: Unify QLM data types in CIU header.
Data types 'cvmx_ciu_qlm0' and 'cvmx_ciu_qlm1' are identical in
their usage and structure. Combine them and update the PCIe code.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19708/ Cc: linux-mips@linux-mips.org Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Steven J. Hill [Tue, 3 Jul 2018 21:44:20 +0000 (16:44 -0500)]
MIPS: Octeon: Remove unused CIU types.
Remove all unused data types. Verified with a 'make allyesconfig'
and Cavium platform.
[paul.burton@mips.com:
- Also checked via convoluted grep invocation for use of all removed
structs & unions within arch/mips/ & drivers/.]
Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19711/ Cc: linux-mips@linux-mips.org Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Coldfire still provides its own variant of the clk API rather than using
the generic COMMON_CLK API. This generally works, but it causes some
link errors with drivers using the clk_round_rate(), clk_set_rate(),
clk_set_parent(), or clk_get_parent() functions when a platform lacks
those interfaces.
This adds empty stub implementations for each of them, and I don't even
try to do something useful here but instead just print a WARN() message
to make it obvious what is going on if they ever end up being called.
The drivers that call these won't be used on these platforms (otherwise
we'd get a link error today), so the added code is harmless bloat and
will warn about accidental use.
Based on commit bd7fefe1f06ca6cc ("ARM: w90x900: normalize clk API").
Paul Burton [Tue, 19 Jun 2018 00:37:59 +0000 (17:37 -0700)]
MIPS: Always use -march=<arch>, not -<arch> shortcuts
The VDSO Makefile filters CFLAGS to select a subset which it uses whilst
building the VDSO ELF. One of the flags it allows through is the -march=
flag that selects the architecture/ISA to target.
Unfortunately in cases where CONFIG_CPU_MIPS32_R{1,2}=y and the
toolchain defaults to building for MIPS64, the main MIPS Makefile ends
up using the short-form -<arch> flags in cflags-y. This is because the
calls to cc-option always fail to use the long-form -march=<arch> flag
due to the lack of an -mabi=<abi> flag in KBUILD_CFLAGS at the point
where the cc-option function is executed. The resulting GCC invocation
is something like:
$ mips64-linux-gcc -Werror -march=mips32r2 -c -x c /dev/null -o tmp
cc1: error: '-march=mips32r2' is not compatible with the selected ABI
These short-form -<arch> flags are dropped by the VDSO Makefile's
filtering, and so we attempt to build the VDSO without specifying any
architecture. This results in an attempt to build the VDSO using
whatever the compiler's default architecture is, regardless of whether
that is suitable for the kernel configuration.
One encountered build failure resulting from this mismatch is a
rejection of the sync instruction if the kernel is configured for a
MIPS32 or MIPS64 r1 or r2 target but the toolchain defaults to an older
architecture revision such as MIPS1 which did not include the sync
instruction:
CC arch/mips/vdso/gettimeofday.o
/tmp/ccGQKoOj.s: Assembler messages:
/tmp/ccGQKoOj.s:273: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:329: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:520: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:714: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1009: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1066: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1114: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1279: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1334: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1374: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1459: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1514: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1814: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:2002: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:2066: Error: opcode not supported on this processor: mips1 (mips1) `sync'
make[2]: *** [scripts/Makefile.build:318: arch/mips/vdso/gettimeofday.o] Error 1
make[1]: *** [scripts/Makefile.build:558: arch/mips/vdso] Error 2
make[1]: *** Waiting for unfinished jobs....
This can be reproduced for example by attempting to build
pistachio_defconfig using Arnd's GCC 8.1.0 mips64 toolchain from
kernel.org:
Resolve this problem by using the long-form -march=<arch> in all cases,
which makes it through the arch/mips/vdso/Makefile's filtering & is thus
consistently used to build both the kernel proper & the VDSO.
The use of cc-option to prefer the long-form & fall back to the
short-form flags makes no sense since the short-form is just an
abbreviation for the also-supported long-form in all GCC versions that
we support building with. This means there is no case in which we have
to use the short-form -<arch> flags, so we can simply remove them.
The manual redefinition of _MIPS_ISA is removed naturally along with the
use of the short-form flags that it accompanied, and whilst here we
remove the separate assembler ISA selection. I suspect that both of
these were only required due to the mips32 vs mips2 mismatch that was
introduced by commit 59b3e8e9aac6 ("[MIPS] Makefile crapectomy.") and
fixed but not cleaned up by commit 9200c0b2a07c ("[MIPS] Fix Makefile
bugs for MIPS32/MIPS64 R1 and R2.").
I've marked this for backport as far as v4.4 where the MIPS VDSO was
introduced. In earlier kernels there should be no ill effect to using
the short-form flags.
Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+ Reviewed-by: James Hogan <jhogan@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19579/
Paul Burton [Fri, 22 Jun 2018 17:55:47 +0000 (10:55 -0700)]
MIPS: Annotate cpu_wait implementations with __cpuidle
Annotate cpu_wait implementations using the __cpuidle macro which
places these functions in the .cpuidle.text section. This allows
cpu_in_idle() to return true for PC values which fall within these
functions, allowing nmi_backtrace() to produce cleaner output for CPUs
running idle functions. For example:
Without this we get register value & backtrace output from all CPUs,
which is generally useless for those running the idle function & serves
only to overwhelm & obfuscate the meaningful output from non-idle CPUs.
Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19598/
Paul Burton [Mon, 19 Sep 2016 21:21:31 +0000 (22:21 +0100)]
MIPS: Malta: Use PIIX4 poweroff driver to power down
Remove the platform code used to power down the system, instead relying
upon the new PIIX4 poweroff driver. This reduces the amount of platform
code required for the Malta board in preparation for allowing it to be
part of a more generic kernel.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/14282/
Paul Burton [Fri, 2 Sep 2016 15:10:06 +0000 (16:10 +0100)]
MIPS: Malta: Cleanup DMA coherence #ifdefs
DMA coherence is not user-selectable in Kconfig, and Malta selects
CONFIG_DMA_MAYBE_COHERENT which in turn selects CONFIG_DMA_NONCOHERENT.
Remove #ifdefs whose conditions can therefore never be true for Malta.
This removes a significant amount of code from bonito_quirks_setup(),
but the code is duplicated in plat_enable_iocoherency() anyway so we
lose nothing but duplication.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/14188/
Paul Burton [Fri, 2 Jun 2017 22:17:25 +0000 (15:17 -0700)]
MIPS: Set MIPS_IC_SNOOPS_REMOTE for systems with CM
In systems that include a MIPS Coherency Manager, the icache always
fills from a cache which is coherent across all CPUs. In I6400 & I6500
systems the icache fills from the dcache which is coherent across all
CPUs. In all other CM-based systems the icache fills from the L2 cache
which is shared between all cores.
This means that an icache will always see stores from remote CPUs
without needing to write them back any further than that L2, which is
what the cpu_icache_snoops_remote_store feature is used to test. In
order for it to return 1 without needing a per-platform override (which
is what Malta has relied upon so far) set the MIPS_IC_SNOOPS_REMOTE flag
when a CM is present.
Joshua Kinard [Tue, 17 Oct 2017 18:26:12 +0000 (14:26 -0400)]
MIPS: Use !pci_is_root_bus(bus) in ops-bridge.c
This is a manual cherrypick of commit c7ddc3d137b7 from Alastair
Bridgewater's IP35 tree that replaces two cases of
"if (bus->number > 0)" with a more correct "if (!pci_is_root_bus(bus))"
in arch/mips/pci/ops-bridge.c.
Paul Burton [Tue, 19 Dec 2017 23:11:08 +0000 (15:11 -0800)]
MIPS: Schedule on CPUs we need to lose FPU for a mode switch
Commit 6b8322576e9d ("MIPS: Force CPUs to lose FP context during mode
switches") ensures that we react to PR_SET_FP_MODE prctl syscalls
quickly by broadcasting an IPI in order to cause CPUs to lose FPU access
when necessary. Whilst it achieves that, unfortunately it causes all
sorts of strange race conditions because:
1) The IPI may arrive at a point where the FPU is in the process of
being enabled, but that process is not yet complete leading to a
state we aren't prepared to handle. For example:
2) The IPI may arrive during kernel use of the FPU, since we generally
only disable preemption around use of the FPU & leave interrupts
enabled. This can lead to us unexpectedly losing access to the FPU
in places where it previously had not been possible. For example:
At first glance a simple fix may seem to be to disable interrupts around
kernel use of the FPU rather than merely preemption, however this would
introduce further overhead outside of the mode switch path & doesn't
solve the third problem:
3) The IPI may arrive whilst the kernel is running code that will lead
to a preempt_disable() call & FPU usage soon. If this happens then
the IPI will be serviced & we'll proceed to enable an FPU whilst the
mode switch is in progress, leading to strange & inconsistent
behaviour.
Further to all of this is a separate but related problem:
4) There are various paths through which we may enable the FPU without
the user having triggered a coprocessor 1 disabled exception. These
paths are those in which we emulate instructions & then enable the
FPU with the expectation that the user might execute an FP
instruction shortly afterwards. However these paths have not
previously checked whether an FP mode switch is underway for the
task, and therefore could enable the FPU whilst such a mode switch
is in progress leading to strange & inconsistent behaviour for user
code.
This patch fixes all of the above by taking a step back & re-examining
our approach to FP mode switches. Up until now we have taken these basic
steps:
a) Prevent any threads that are part of the affected process from being
able to obtain ownership of the FPU.
b) Cause any threads that are part of the affected process and already
have ownership of an FPU to lose it.
c) Set the thread flags for each thread that is part of the affected
process to reflect the new FP mode.
d) Allow threads to obtain ownership of the FPU again.
This approach is however more complex than necessary. All that we really
require is that the mode switch has occurred for all threads that are
part of the affected process before mips_set_process_fp_mode(), and thus
the PR_SET_FP_MODE prctl() syscall, returns. This doesn't require that
we stop threads from owning or using an FPU whilst a mode switch occurs,
only that we force them to relinquish it after the mode switch has
occurred such that they next own an FPU with the correct mode
configured. Our basic steps therefore simplify to:
A) Set the thread flags for each thread that is part of the affected
process to reflect the new FP mode.
B) Cause any threads that are part of the affected process and already
have ownership of an FPU to lose it.
We implement B) by forcing each CPU which might be running a thread
which is part of the affected process to schedule a no-op function,
which causes the affected thread to lose its FPU ownership when it is
descheduled.
The end result is simpler FP mode switching with less overhead in the
FPU enable path (ie. enable_restore_fp_context()) and fewer moving
parts.
Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS") Fixes: 6b8322576e9d ("MIPS: Force CPUs to lose FP context during mode switches") Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable <stable@vger.kernel.org> # v4.0+
The DT core will call of_platform_default_populate, so it is not necessary
for arch specific code to call it unless there are custom match entries,
auxdata or parent device. Neither of those apply here, so remove the call.
Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Signed-off-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19592/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-kernel@vger.kernel.org
The DT core will call of_platform_populate, so it is not necessary for
arch specific code to call it unless there are custom match entries,
auxdata or parent device. Neither of those apply here, so remove the call.
Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Signed-off-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19591/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-kernel@vger.kernel.org
Rob Herring [Tue, 19 Jun 2018 21:47:08 +0000 (15:47 -0600)]
MIPS: bmips: remove unnecessary call to register "simple-bus"
The DT core will register "simple-bus" by default, so it is not necessary
for arch specific code to do so unless there are custom match entries,
auxdata or parent device. Neither of those apply here, so remove the call.
Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Signed-off-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19590/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-kernel@vger.kernel.org
The DT core code will probe "simple-bus" by default, so remove
the Netlogic specific call. The probing of simple-bus happens at
arch_initcall_sync, so the call being removed here is already a nop.
Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Signed-off-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19589/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-kernel@vger.kernel.org
Rob Herring [Tue, 19 Jun 2018 21:47:06 +0000 (15:47 -0600)]
MIPS: octeon: use of_platform_populate to probe devices
of_platform_bus_probe is deprecated in favor of of_platform_populate.
of_platform_populate is stricter requiring compatible properties for
matching rather than name or type. Octeon uses compatible strings for
matching, so convert it to of_platform_populate.
Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Signed-off-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19588/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-kernel@vger.kernel.org
Heiher [Mon, 11 Jun 2018 09:01:10 +0000 (17:01 +0800)]
MIPS: Fix ejtag handler on SMP
On SMP systems, the shared ejtag debug buffer may be overwritten by
other cores, because every cores can generate ejtag exception at
same time.
Unfortunately, in that context, it's difficult to relax more registers
to access per cpu buffers. so use ll/sc to serialize the access.
[paul.burton@mips.com:
This could in theory be backported at least as far back as the
beginning of the git era, however in general it's exceedingly rare
that anyone would hit this without further changes, so it doesn't seem
worthwhile marking for backport.]
MIPS: boot: merge build rules of vmlinux.*.itb by using pattern rule
Merge the build rule of vmlinux.{gz,bz2,lzma,lzo}.itb, and also move
'targets' close to the related code.
[paul.burton@mips.com:
- Remove leading tabs from assignments to itb_addr_cells, since after
this patch moves the additions to the 'targets' variable the
assignments to itb_addr_cells wound up being treated as part of the
uImage rule above them, causing the .its to incorrectly be generated
with empty ADDR_CELLS.]
As Documentation/kbuild/makefile.txt says, it is a typical mistake
to forget the FORCE prerequisite for the rule invoked by if_changed.
Add the FORCE to the prerequisite, but it must be filtered-out from
the files passed to the 'cat' command. Because this rule generates
.vmlinux.its.S.cmd, vmlinux.its.S must be specified as targets so
that the .cmd file is included.
MIPS: boot: do not include $(cpp_flags) for preprocessing ITS
$(CPP) is used here to perform macro replacement in ITS. Do not
pass $(cpp_flags) because it pulls in more options for dependency
file generation etc. but none of which is necessary here. ITS files
do not include any header file, so $(call if_change,...) is enough.
It is true that commit 0f9da844d877 ("MIPS: boot: Define __ASSEMBLY__
for its.S build") fixed the build error, but it should not have
defined __ASSEMBLY__ just for textual substitution in arbitrary data.
The file is image tree source in this case, but the purpose of using
CPP is to replace some macros.
I merged a better solution, commit a95b37e20db9 ("kbuild: get
<linux/compiler_types.h> out of <linux/kconfig.h>"). The original
fix-up is no longer needed.
Booleans should be assigned true/false not 1/0 as comparison is not needed
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Patchwork: https://patchwork.linux-mips.org/patch/19559/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: David Daney <david.daney@cavium.com> Cc: "Steven J. Hill" <Steven.Hill@cavium.com> Cc: Joe Perches <joe@perches.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
MIPS: jazz: split dma mapping operations from dma-default
Jazz actually has a very basic IOMMU, so split the ops into a separate
implementation from the generic default support (which is about to go
away anyway).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19548/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David Daney <david.daney@cavium.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: iommu@lists.linux-foundation.org Cc: linux-mips@linux-mips.org
MIPS: use generic dma noncoherent ops for simple noncoherent platforms
Convert everything not overriding dma-coherence.h to the generic
noncoherent ops. The new dma-noncoherent.c file duplicates a lot of
the code in dma-default.c, but that file will be gone by the end of
this series.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19544/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David Daney <david.daney@cavium.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: iommu@lists.linux-foundation.org Cc: linux-mips@linux-mips.org
Only loongson-3 is DMA coherent and uses swiotlb. So move the dma
address translations stubs directly to the loongson-3 code, and remove
a few Kconfig indirections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19539/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David Daney <david.daney@cavium.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: iommu@lists.linux-foundation.org Cc: linux-mips@linux-mips.org
swiotlb_dma_supported will always return true for a mask large enough to
cover the DMA addresses for all physical memory, which is the right
thing to do for swiotlb based dma ops. This function returned false
if the mask was bigger than a firmware set dma_mask_bits that apparently
can be either 32 or 64, and which seems completely buggys if it actually
is not 64, as the false return negates the whole point of swiotlb.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19533/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David Daney <david.daney@cavium.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: iommu@lists.linux-foundation.org Cc: linux-mips@linux-mips.org
Share a common set of swiotlb operations, and to instead branch out in
__phys_to_dma/__dma_to_phys for the PCI vs non-PCI case. Also use const
structures for the PCI methods so that attackers can't use them as
exploit vectors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19532/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David Daney <david.daney@cavium.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: iommu@lists.linux-foundation.org Cc: linux-mips@linux-mips.org
Use fixed width integer types for ecoff structs to make elf2ecoff work
on 64bit host machines.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Reviewed-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19483/ Signed-off-by: Paul Burton <paul.burton@mips.com>
Linus Torvalds [Sun, 24 Jun 2018 12:29:15 +0000 (20:29 +0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A pile of perf updates:
Kernel side:
- Remove an incorrect warning in uprobe_init_insn() when
insn_get_length() fails. The error return code is handled at the
call site.
- Move the inline keyword to the right place in the perf ringbuffer
code to address a W=1 build warning.
Tooling:
perf stat:
- Fix metric column header display alignment
- Improve error messages for default attributes, providing better
output for error in command line.
- Add --interval-clear option, to provide a 'watch' like printing
perf script:
- Show hw-cache events too
perf c2c:
- Fix data dependency problem in layout of 'struct c2c_hist_entry'
Core:
- Do not blindly assume that 'struct perf_evsel' can be obtained via
a straight forward container_of() as there are call sites which
hand in a plain 'struct hist' which is not part of a container.
- Fix error index in the PMU event parser, so that error messages can
point to the problematic token"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Move the inline keyword at the beginning of the function declaration
uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn()
perf script: Show hw-cache events
perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry
perf stat: Add event parsing error handling to add_default_attributes
perf stat: Allow to specify specific metric column len
perf stat: Fix metric column header display alignment
perf stat: Use only color_fprintf call in print_metric_only
perf stat: Add --interval-clear option
perf tools: Fix error index for pmu event parser
perf hists: Reimplement hists__has_callchains()
perf hists browser gtk: Use hist_entry__has_callchains()
perf hists: Make hist_entry__has_callchains() work with 'perf c2c'
perf hists: Save the callchain_size in struct hist_entry
Linus Torvalds [Sun, 24 Jun 2018 12:18:19 +0000 (20:18 +0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq fixes from Thomas Gleixer:
"A pile of rseq related fixups:
- Prevent infinite recursion when delivering SIGSEGV
- Remove the abort of rseq critical section on fork() as syscalls
inside rseq critical sections are explicitely forbidden. So no
point in doing the abort on the child.
- Align the rseq structure on 32 bytes in the ARM selftest code.
- Fix file permissions of the test script"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Avoid infinite recursion when delivering SIGSEGV
rseq/cleanup: Do not abort rseq c.s. in child on fork()
rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytes
rseq/selftests: Make run_param_test.sh executable
Linus Torvalds [Sun, 24 Jun 2018 12:16:17 +0000 (20:16 +0800)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
"Two fixlets for the EFI maze:
- Properly zero variables to prevent an early boot hang on EFI mixed
mode systems
- Fix the fallout of merging the 32bit and 64bit variants of EFI PCI
related code which ended up chosing the 32bit variant of the actual
EFi call invocation which leads to failures on 64bit"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Fix incorrect invocation of PciIo->Attributes()
efi/libstub/tpm: Initialize efi_physical_addr_t vars to zero for mixed mode
Linus Torvalds [Sun, 24 Jun 2018 12:06:42 +0000 (20:06 +0800)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
"Two tiny fixes:
- Add the missing machine_real_restart() to objtools noreturn list so
it stops complaining
- Fix a trivial comment typo"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel.h: Fix a typo in comment
objtool: Add machine_real_restart() to the noreturn list
projects / mirror_ubuntu-kernels.git / log