drm/lima: always set page directory when switch vm
We need to flush TLB anyway before every task start, and the
page directory will be set to empty vm after suspend/resume,
so always set it to the task vm even no ctx switch happens.
Robin Murphy [Tue, 21 Apr 2020 22:51:37 +0000 (23:51 +0100)]
drm/lima: Clean up redundant pdev pointer
There's no point explicitly tracking the platform device when it can be
trivially derived from the regular device pointer in the couple of
places it's ever used.
Robin Murphy [Tue, 21 Apr 2020 22:51:36 +0000 (23:51 +0100)]
drm/lima: Clean up IRQ warnings
Use the optional form of platform_get_irq() for blocks that legitimately
may not be present, to avoid getting an annoying barrage of spurious
warnings for non-existent PPs on configurations like Mali-450 MP2.
Unfortunately it would appear that the rumors we've heard of sideband
message interleaving not being very well supported are true. On the
Lenovo ThinkPad Thunderbolt 3 dock that I have, interleaved messages
appear to just get dropped:
DP descriptor for this hub:
OUI 90-cc-24 dev-ID SYNA3 HW-rev 1.0 SW-rev 3.12 quirks 0x0008
It would seem like as well that this is a somewhat well known issue in
the field. From section 5.4.2 of the DisplayPort 2.0 specification:
There are MST Sink/Branch devices in the field that do not handle
interleaved message transactions.
To facilitate message transaction handling by downstream devices, an
MST Source device shall generate message transactions in an atomic
manner (i.e., the MST Source device shall not concurrently interleave
multiple message transactions). Therefore, an MST Source device shall
clear the Message_Sequence_No value in the Sideband_MSG_Header to 0.
MST Source devices that support field policy updates by way of
software should update the policy to forego the generation of
interleaved message transactions.
This is a bit disappointing, as features like HDCP require that we send
a sideband request every ~2 seconds for each active stream. However,
there isn't really anything in the specification that allows us to
accurately probe for interleaved messages.
If it ends up being that we -really- need this in the future, we might
be able to whitelist hubs where interleaving is known to work-or maybe
try some sort of heuristics. But for now, let's just play it safe and
not use it.
drivers/gpu/drm/gma500/oaktrail_hdmi.c:676:35: warning: ‘hdmi_ids’ defined but not used [-Wunused-const-variable=]
static const struct pci_device_id hdmi_ids[] = {
^~~~~~~~
drm/ast: Allocate initial CRTC state of the correct size
The ast driver inherits from DRM's CRTC state, but still uses the atomic
helper for struct drm_crtc_funcs.reset, drm_atomic_helper_crtc_reset().
The helper only allocates enough memory for the core CRTC state. That
results in an out-ouf-bounds access when duplicating the initial CRTC
state. Simplified backtrace shown below:
Johan Jonker [Fri, 3 Apr 2020 13:36:30 +0000 (15:36 +0200)]
dt-bindings: display: convert rockchip rk3066 hdmi bindings to yaml
Current dts files with 'hdmi' nodes for rk3066 are manually verified.
In order to automate this process rockchip,rk3066-hdmi.txt
has to be converted to yaml.
The Tegra DRM drivers includes the legacy GPIO headers
<linux/gpio.h> and <linux/of_gpio.h> but what it really
uses is <linux/gpio/consumer.h> since only gpio_desc
structs are ever referenced.
Include the right header on the top level tegra/drm.h
file and drop all the surplus includes.
Chuhong Yuan [Sun, 29 Mar 2020 14:58:39 +0000 (22:58 +0800)]
video: fbdev: vesafb: add missed release_region
The driver forgets to free the I/O region in remove and probe
failure.
Add the missed calls to fix it.
Since the success of request_region() is optional, add the "region" field
in vesafb_par to represent whether request_region() succeeds.
Then only call release_region() when "region" is not null.
Chuhong Yuan [Tue, 24 Mar 2020 13:23:53 +0000 (21:23 +0800)]
video: fbdev: arcfb: add missed free_irq and fix the order of request_irq
The driver forgets to free irq in remove which is requested in
probe.
Add the missed call to fix it.
Also, the position of request_irq() in probe should be put before
register_framebuffer().
Chuhong Yuan [Tue, 24 Mar 2020 13:23:11 +0000 (21:23 +0800)]
fbdev: s1d13xxxfb: add missed unregister_framebuffer in remove
The driver calls register_framebuffer() in probe but does not call
unregister_framebuffer() in remove.
Rename current remove to __s1d13xxxfb_remove() for error handler.
Then add a new remove to call unregister_framebuffer().
This converts the SA11x0 frame buffer driver to use
GPIO descriptors. Get the GPIO optional and register
a look-up table specifically for the Shannon machine.
Jason Yan [Fri, 17 Apr 2020 09:23:18 +0000 (17:23 +0800)]
video: fbdev: aty128fb: remove unused 'sdr_64'
Fix the following gcc warning:
drivers/video/fbdev/aty/aty128fb.c:337:36: warning: ‘sdr_64’ defined but
not used [-Wunused-const-variable=]
static const struct aty128_meminfo sdr_64 = {
^~~~~~
drivers/video/fbdev/omap2/omapfb/dss/venc.c:212:33:
warning: ‘venc_config_pal_bdghi’ defined but not used [-Wunused-const-variable=]
static const struct venc_config venc_config_pal_bdghi = {
^~~~~~~~~~~~~~~~~~~~~
Sam Ravnborg [Sun, 12 Apr 2020 20:21:43 +0000 (22:21 +0200)]
video: vt8500lcdfb: fix fallthrough warning
Fix following warning:
vt8500lcdfb.c: In function 'vt8500lcd_blank':
vt8500lcdfb.c:229:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR ||
^
vt8500lcdfb.c:233:2: note: here
case FB_BLANK_UNBLANK:
^~~~
Adding a simple "fallthrough;" fixed the warning.
The fix was build tested.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: kbuild test robot <lkp@intel.com> Fixes: e41f1a989408 ("fbdev: Implement simple blanking in pseudocolor modes for vt8500lcdfb") Cc: Alexey Charkov <alchark@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: <stable@vger.kernel.org> # v2.6.38+ Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200412202143.GA26948@ravnborg.org
The fbdev framework doesn't care to call the .set_power callback only on
changes. So the driver has to care for itself that the regulator doesn't
get disabled more often than enabled.
Add COMPILE_TEST support to controlfb driver for better compile
testing coverage.
While at it:
- convert driver to use eieio() and dcbf() helpers instead of
open-coding them
- add invalid_vram_cache() helper to avoid code duplication
Andy Shevchenko [Tue, 24 Mar 2020 17:05:31 +0000 (19:05 +0200)]
video: ssd1307fb: Convert to atomic PWM API
Use the atomic API wherever appropriate and get rid of pwm_apply_args()
call (the reference period and polarity are now explicitly set when
calling pwm_apply_state()).
We also make use of the pwm_set_relative_duty_cycle() helper to ease
relative to absolute duty_cycle conversion.
Andy Shevchenko [Tue, 24 Mar 2020 17:05:30 +0000 (19:05 +0200)]
video: ssd1307fb: Make use of device properties
Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.
Merge tag 'topic/phy-compliance-2020-04-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next
Topic pull request for topic/phy-compliance:
- Standardize DP_PHY_TEST_PATTERN name.
- Add support for setting/getting test pattern from sink.
- Implement DP PHY compliance to i915.
drm: Don't free a struct never allocated by drm_gem_fb_init()
drm_gem_fb_init() is passed the fb and never allocates it, so it should be
not the one freeing it. As it is now the second call to kfree() is possible
with the same fb. Coverity reported the following:
*** CID 1492613: Memory - corruptions (USE_AFTER_FREE)
/drivers/gpu/drm/drm_gem_framebuffer_helper.c: 230 in drm_gem_fb_create_with_funcs()
224 fb = kzalloc(sizeof(*fb), GFP_KERNEL);
225 if (!fb)
226 return ERR_PTR(-ENOMEM);
227
228 ret = drm_gem_fb_init_with_funcs(dev, fb, file, mode_cmd, funcs);
229 if (ret) {
vvv CID 1492613: Memory - corruptions (USE_AFTER_FREE)
vvv Calling "kfree" frees pointer "fb" which has already been freed. [Note: The source code implementation of the function has been overridden by a user model.]
230 kfree(fb);
231 return ERR_PTR(ret);
232 }
233
234 return fb;
235 }
Sam Ravnborg [Wed, 8 Apr 2020 19:51:02 +0000 (21:51 +0200)]
dt-bindings: display: convert sharp,ls043t1le01 to DT Schema
The txt binding specified the property "power-supply".
But the example and the actual implementation in the linux-kernel
uses "avdd-supply".
So the binding is adjusted to use avdd-supply as this seems
to be the correct choice.
There are no DT files in the linux kernel to check.
Sam Ravnborg [Wed, 8 Apr 2020 19:50:59 +0000 (21:50 +0200)]
dt-bindings: display: convert sony,acx565akm to DT Schema
v2:
- drop use of spi-slave.yaml (Maxime)
- add unevaluatedProperties (Maxime)
- rename node in example to panel (Rob)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-27-sam@ravnborg.org
Sam Ravnborg [Wed, 8 Apr 2020 19:50:55 +0000 (21:50 +0200)]
dt-bindings: display: convert samsung,ld9040 to DT Schema
v2:
- drop use of spi-slave.yaml (Maxime)
- added unevaluatedProperties (Maxime)
- added type to width/height properties (Rob)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-23-sam@ravnborg.org
Sam Ravnborg [Wed, 8 Apr 2020 19:50:46 +0000 (21:50 +0200)]
dt-bindings: display: convert kingdisplay,kd035g6-54nt to DT Schema
v2:
- Drop use of spi-slave.yaml (Maxime)
- Introduce unevaluatedProperties (Maxime)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-14-sam@ravnborg.org
Sam Ravnborg [Wed, 8 Apr 2020 19:50:44 +0000 (21:50 +0200)]
dt-bindings: display: convert innolux,p120zdg-bf1 to DT Schema
v3:
- Fix stray spaces
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sandeep Panda <spanda@codeaurora.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-12-sam@ravnborg.org
Sam Ravnborg [Wed, 8 Apr 2020 19:50:41 +0000 (21:50 +0200)]
dt-bindings: display: convert ilitek,ili9881c to DT Schema
Updating this binding identified an issue in the example in
the allwinner,sun6i-a31-mipi-dsi binding.
Fix the example so no new warnings are introduced.
v2:
- fix example in allwinner,sun6i-a31-mipi-dsi (Rob)
Sam Ravnborg [Wed, 8 Apr 2020 19:50:37 +0000 (21:50 +0200)]
dt-bindings: display: convert samsung,s6e63m0 to DT Schema
The binding for this panel is a SPI slave.
v2:
- Drop use of spi-slave (Maxime)
- Introude unevaluatedProperties (Maxime)
- Drop reg entry in example (Rob)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Jonathan Bakker <xc-racer2@live.ca> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-5-sam@ravnborg.org
drm: bridge: adv7511: Extend list of audio sample rates
ADV7511 support sample rates up to 192kHz. CTS and N parameters should
be computed accordingly so this commit extend the list up to maximum
supported sample rate.
John Stultz [Thu, 9 Apr 2020 00:43:06 +0000 (00:43 +0000)]
drm: kirin: Revert change to add register connect helper functions
Daniel noted[1] that commit d606dc9a6323 ("drm: kirin: Add
register connect helper functions in drm init") was unnecessary
and incorrect, as drm_dev_register does register connectors for
us.
Thus, this patch reverts the change as suggested by Daniel.
Sam Ravnborg [Wed, 8 Apr 2020 18:29:26 +0000 (20:29 +0200)]
fbdev: mx3fb: const pointer to ipu_di_signal_cfg
Laurent Pinchart <laurent.pinchart@ideasonboard.com> and
Jani Nikula <jani.nikula@intel.com> both
suggested to make the pointer to struct ipu_di_signal_cfg const.
This sorts the actual field names too, potentially causing even more
chaos and confusion at merge time if you have edited the MAINTAINERS
file. But the end result is a more consistent layout, and hopefully
it's a one-time pain minimized by doing this just before the -rc1
release.
They are all supposed to be sorted, but people who add new entries don't
always know the alphabet. Plus sometimes the entry names get edited,
and people don't then re-order the entry.
Let's see how painful this will be for merging purposes (the MAINTAINERS
file is often edited in various different trees), but Joe claims there's
relatively few patches in -next that touch this, and doing it just
before -rc1 is likely the best time. Fingers crossed.
Merge tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of three patches to fix the fallout of the newly added split
lock detection feature.
It addressed the case where a KVM guest triggers a split lock #AC and
KVM reinjects it into the guest which is not prepared to handle it.
Add proper sanity checks which prevent the unconditional injection
into the guest and handles the #AC on the host side in the same way as
user space detections are handled. Depending on the detection mode it
either warns and disables detection for the task or kills the task if
the mode is set to fatal"
* tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest
KVM: x86: Emulate split-lock access as a write in emulator
x86/split_lock: Provide handle_guest_split_lock()
Merge tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time(keeping) updates from Thomas Gleixner:
- Fix the time_for_children symlink in /proc/$PID/ so it properly
reflects that it part of the 'time' namespace
- Add the missing userns limit for the allowed number of time
namespaces, which was half defined but the actual array member was
not added. This went unnoticed as the array has an exessive empty
member at the end but introduced a user visible regression as the
output was corrupted.
- Prevent further silent ucount corruption by adding a BUILD_BUG_ON()
to catch half updated data.
* tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ucount: Make sure ucounts in /proc/sys/user don't regress again
time/namespace: Add max_time_namespaces ucount
time/namespace: Fix time_for_children symlink
Merge tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes/updates from Thomas Gleixner:
- Deduplicate the average computations in the scheduler core and the
fair class code.
- Fix a raise between runtime distribution and assignement which can
cause exceeding the quota by up to 70%.
- Prevent negative results in the imbalanace calculation
- Remove a stale warning in the workqueue code which can be triggered
since the call site was moved out of preempt disabled code. It's a
false positive.
- Deduplicate the print macros for procfs
- Add the ucmap values to the SCHED_DEBUG procfs output for completness
* tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Add task uclamp values to SCHED_DEBUG procfs
sched/debug: Factor out printing formats into common macros
sched/debug: Remove redundant macro define
sched/core: Remove unused rq::last_load_update_tick
workqueue: Remove the warning in wq_worker_sleeping()
sched/fair: Fix negative imbalance in imbalance calculation
sched/fair: Fix race between runtime distribution and assignment
sched/fair: Align rq->avg_idle and rq->avg_scan_cost
Merge tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Three fixes/updates for perf:
- Fix the perf event cgroup tracking which tries to track the cgroup
even for disabled events.
- Add Ice Lake server support for uncore events
- Disable pagefaults when retrieving the physical address in the
sampling code"
* tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Disable page faults when getting phys address
perf/x86/intel/uncore: Add Ice Lake server uncore support
perf/cgroup: Correct indirection in perf_less_group_idx()
perf/core: Fix event cgroup tracking
Merge tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Ten cifs/smb fixes:
- five RDMA (smbdirect) related fixes
- add experimental support for swap over SMB3 mounts
- also a fix which improves performance of signed connections"
* tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: enable swap on SMB3 mounts
smb3: change noisy error message to FYI
smb3: smbdirect support can be configured by default
cifs: smbd: Do not schedule work to send immediate packet on every receive
cifs: smbd: Properly process errors on ib_post_send
cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets
cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending
cifs: smbd: Check send queue size before posting a send
cifs: smbd: Merge code to track pending packets
cifs: ignore cached share root handle closing errors
Merge tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix an integer truncation in dma_direct_get_required_mask
(Kishon Vijay Abraham)
- fix the display of dma mapping types (Grygorii Strashko)
* tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: fix displaying of dma allocation type
dma-direct: fix data truncation in dma_direct_get_required_mask()
Merge tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
projects / mirror_ubuntu-kernels.git / log