dt-bindings: sound: wm8994: Correct required supplies based on actual implementaion
The required supplies in bindings were actually not matching
implementation making the bindings incorrect and misleading. The Linux
kernel driver requires all supplies to be present. Also for wlf,wm8994
uses just DBVDD-supply instead of DBVDDn-supply (n: <1,3>).
ASoC: Intel: boards: sof-wm8804: support for Hifiberry Digiplus boards
Add a new machine driver to interface with WM8804. The code is based
on settings found in sound/soc/bcm/hifiberry-digi.c in the Raspberry
PI tree.
Tested on Up2 with Digi+ IO (capture+playback) and Digi+ PRO (playback
with two local oscillators supported). The codec is clock master in
both cases.
Capture support has known clocking restrictions: the transmitter needs
to be active for the clock recovery, the "Tx Source" mixer set to
"S/PDIF RX". Playback will only work while capture is active.
When Capture is not desired, or when there is no RX connector, the "Tx
Source" mixer should be set to "AIF"
Mark Brown [Thu, 30 Apr 2020 13:39:45 +0000 (14:39 +0100)]
Merge series "SOF topology parsing updates" from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series includes updates in the topology parser for DAIs
and their config.
The first three patches address the problem of sending the DAI
config to the DSP when there are multiple DAIs associated with
a DAI link.
The last patch deals with setting the default trigger order
for all links. Exceptions needed for HDA links are moved to
the DAI link fixup() callback.
Bard Liao (3):
ASoC: SOF: topology: send ipc for all found DAIs in sof_set_dai_config
ASoC: topology: set component dai_index to ipc dai config dai_index
ASoC: SOF: topology: replace sof_link_hda_process by
sof_set_dai_config
randerwang (1):
ASoC: SOF: Intel: change trigger sequence to fix pop noise when
stopping playback on sdw platforms
This is complicated by two drivers having dependencies on both
platform specific drivers and the SND_SOC_SOF_OF framework code,
and using an somewhat obscure method to build them the same way
as the SOC_SOF_OF symbol (built-in or modular).
My solution now ensures that the two drivers can only be enabled
when the dependencies are met:
- When the platform specific drivers are built-in, everything is
fine, as SOC_SOF_OF is either =y or =m
- When both are loadable modules, it also works, both for Kconfig
and at runtime
- When the hardware drivers are loadable modules or disabled, and
SOC_SOF_OF=y, prevent the IMX_SOF_OF drivers from being turned on,
as this would be broken.
It seems that this is just an elaborate way to describe two tristate
symbols that have straight dependencies, but maybe I'm missing some
subtle point. It seems to always build for me now.
ASoC: SOF: Intel: change trigger sequence to fix pop noise when stopping playback on sdw platforms
Now the trigger sequence is set to SND_SOC_DPCM_TRIGGER_POST for
SOF. This means FE will be stopped before BE, so BE will consume
invalid data and this generates huge pop noise. This sequence is
introduced for HDA DAI which requires SND_SOC_DPCM_TRIGGER_POST for
some reasons. Now set default trigger sequence to SND_SOC_DPCM_TRIGGER_PRE
for playback with all DAI and fix sequence only for HDA DAI.
ASoC: SOF: topology: replace sof_link_hda_process by sof_set_dai_config
Now we send ipc in sof_set_dai_config(), too. Therefore, we can use
sof_set_dai_config() in sof_link_hda_load() just like other link load
functions do.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200427172939.25848-4-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: topology: set component dai_index to ipc dai config dai_index
The ipc dai config dai_index is from topology. However, the same dai
config will be applied to all DAIs in the same dai link. We have to
ensure that the ipc dai config's dai_index match to the component's
dai_index.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200427172939.25848-3-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
If one of the two is a loadable module, the combined driver must
not be built-in:
aarch64-linux-ld: sound/soc/codecs/rt5682.o: in function `rt5682_sdw_hw_free':
rt5682.c:(.text+0xb34): undefined reference to `sdw_stream_remove_slave'
aarch64-linux-ld: sound/soc/codecs/rt5682.o: in function `rt5682_sdw_hw_params':
rt5682.c:(.text+0xe78): undefined reference to `sdw_stream_add_slave'
In particular, the soundwire driver must not be built-in if
CONFIG_I2C=m.
ifdefs are hard, and in this driver the suspend/resume functions are
the only callers of some other helpers that trigger a harmless warning
when CONFIG_PM is disabled:
sound/soc/fsl/fsl_easrc.c:1807:12: warning: 'fsl_easrc_get_firmware' defined but not used [-Wunused-function]
1807 | static int fsl_easrc_get_firmware(struct fsl_asrc *easrc)
| ^~~~~~~~~~~~~~~~~~~~~~
sound/soc/fsl/fsl_easrc.c:303:12: warning: 'fsl_easrc_resampler_config' defined but not used [-Wunused-function]
303 | static int fsl_easrc_resampler_config(struct fsl_asrc *easrc)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Remove the #ifdef and just mark the callers as __maybe_unused to
suppress the warnings altogether.
Fixes: 955ac624058f ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20200428212847.2926376-1-arnd@arndb.de Signed-off-by: Mark Brown <broonie@kernel.org>
Old versions of gcc (tested on gcc-4.8) produce a warning for
correct code:
sound/soc/soc-compress.c: In function 'soc_compr_open':
sound/soc/soc-compress.c:75:28: error: 'component' is used uninitialized in this function [-Werror=uninitialized]
struct snd_soc_component *component, *save = NULL;
Change the for_each_rtd_components() macro to ensure 'component'
gets initialized to a value the compiler does not complain about.
Current ASoC overwrites null_dai_ops to dai->driver->ops if it
was NULL. But, we can remove it if framework always checks
dai->driver->ops when it uses DAI callbacks.
This patch do it, and removes null_dai_ops.
Mark Brown [Tue, 28 Apr 2020 15:40:38 +0000 (16:40 +0100)]
Merge series "Kconfig updates for DMIC and SOF HDMI support" from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series provides the following updtes to the Intel machine driver
Kconfig:
1. The first patch adds the explicit dependency on GPIOLIB when
SND_SOC_DMIC is selected.
2. SND_SOC_SOF_HDA_AUDIO_CODEC is required for using the legacy
HDA codec driver for HDMI support in SOF. The last 3 three patches
make the required changes to account for this.
Libin Yang (3):
ASoC: intel: add depends on SND_SOC_SOF_HDA_AUDIO_CODEC for common
hdmi
ASoC: sof-sdw: remove CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC condition
ASoC: sof_pcm512x: remove CONFIG_SND_HDA_CODEC_HDMI condition
Pierre-Louis Bossart (1):
ASoC: Intel: boards: add explicit dependency on GPIOLIB when DMIC is
used
Mark Brown [Tue, 28 Apr 2020 15:40:37 +0000 (16:40 +0100)]
Merge series "add channel constraint for BDW machine drivers" from Brent Lu <brent.lu@intel.com>:
The machine driver bdw-rt5650 (for Google buddy) supports 2 or 4-channel
recording while other two drivers support only 2-channel recording. HW
constraints are implemented to reflect the hardware limitation on BDW
platform.
Changes since v1:
- Change the patch title.
- Remove the DUAL_CHANNEL and QUAD_CHANNEL macros which are too obvious.
- Follow the naming convertion, using 'bdw_rt5650_' and 'bdw_rt5677_' to
name startup functions.
- Refine the comments in startup functions.
- Redesign the bdw_rt5650_fe_startup() function for readability.
- Add an assignment to initialize runtime->hw.channels_max variable.
ASoC: Intel: Skylake: Automatic DMIC format configuration according to information from NHLT
Automatically choose DMIC pipeline format configuration depending on
information included in NHLT.
Change the access rights of appropriate kcontrols to read-only in order
to prevent user interference.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200427132727.24942-4-mateusz.gorski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Intel: Multiple I/O PCM format support for pipe
For pipes supporting multiple input/output formats, kcontrol is
created and selection of pipe input and output configuration
is done based on control set.
If more than one configuration is supported, then this patch
allows user to select configuration of choice
using amixer settings.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com> Signed-off-by: Pavan K S <pavan.k.s@intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200427132727.24942-3-mateusz.gorski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Intel: Skylake: Add alternative topology binary name
Add alternative topology binary file name based on used machine driver
and fallback to use this name after failed attempt to load topology file
with name based on NHLT.
This change addresses multiple issues with current mechanism, for
example - there are devices without NHLT table, and that currently
results in tplg_name being empty.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200427132727.24942-2-mateusz.gorski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Tang Bin [Mon, 20 Apr 2020 14:25:09 +0000 (22:25 +0800)]
ASoC: mxs-saif: Avoid unnecessary check
The function mxs_saif_probe() is only called with an
openfirmware platform device. Therefore there is no
need to check that it has an openfirmware node.
ASoC: Intel: sof_sdw: add amp number in components string for ucm
The number of speaker amplifiers may vary between platforms. UCM
needs to check amp number to include different configuration files.
This patch keeps track of the number of speaker amplifiers and
stores it in components string of the card.
Jaroslav Kysela [Fri, 24 Apr 2020 09:25:20 +0000 (11:25 +0200)]
ASoC: snd-sof-intel-hda-common - add hda_model parameter and pass it to HDA codec driver
It may be useful to pass the specific model to the generic HDA codec
routines like the legacy HDA driver (snd-hda-intel) allows.
The model name "sofbus" is tricky anyway.
Original proposal: https://lore.kernel.org/alsa-devel/20191203161908.7496-1-perex@perex.cz/
Signed-off-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200424092520.23989-1-perex@perex.cz Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/soc-compress.c: In function ‘soc_compr_open’:
sound/soc/soc-compress.c:75:28: warning: ‘component’ is used uninitialized in this function [-Wuninitialized]
struct snd_soc_component *component, *save = NULL;
^~~~~~~~~
Simplest fix is to initialize it to avoid the warning.
Shengjiu Wang [Fri, 24 Apr 2020 02:01:38 +0000 (10:01 +0800)]
ASoC: wm8962: set CLOCKING2 as non-volatile register
Previously CLOCKING2 is set as a volatile register, but cause
issue at suspend & resume, that some bits of CLOCKING2 is not
restored at resume, for example SYSCLK_SRC bits, then the output
clock is wrong.
The volatile property is caused by CLASSD_CLK_DIV bits,
which are controlled by the chip itself. But the datasheet
claims these are read only and protected by the security key,
and they are not read by the driver at all.
So it should be safe to change CLOCKING2 to be non-volatile.
Mark Brown [Wed, 22 Apr 2020 08:35:50 +0000 (09:35 +0100)]
ASoC: dmic: Allow GPIO operations to sleep
If there is a power GPIO provided we control it from DAPM context so there
is no problem with a sleeping GPIO, use the _cansleep() version of the API
to allow this.
Kai Vehmanen [Mon, 20 Apr 2020 20:54:31 +0000 (23:54 +0300)]
ASoC: intel/skl/hda - fix oops on systems without i915 audio codec
Recent fix for jack detection caused a regression on systems with HDA
audio codec but no HDMI/DP audio via i915 graphics, leading to a kernel
oops at device probe. On these systems, HDA bus instance lookup fails,
as the first ASoC runtime of the card is connected to a dummy codec
(as no HDMI codec is present).
Fixes: 3a24f135e6cc ("ASoC: intel/skl/hda - set autosuspend timeout for hda codecs") Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200420205431.13070-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Tue, 21 Apr 2020 18:22:09 +0000 (19:22 +0100)]
Merge series "ASoC: Add new module driver for new ASRC" from Shengjiu Wang <shengjiu.wang@nxp.com>:
Add new module driver for new ASRC in i.MX8MN, several commits
are added for new property fsl,asrc-format
Shengjiu Wang (7):
ASoC: fsl_asrc: rename asrc_priv to asrc
ASoC: dt-bindings: fsl_asrc: Add new property fsl,asrc-format
ASoC: fsl-asoc-card: Support new property fsl,asrc-format
ASoC: fsl_asrc: Support new property fsl,asrc-format
ASoC: fsl_asrc: Move common definition to fsl_asrc_common
ASoC: dt-bindings: fsl_easrc: Add document for EASRC
ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers
changes in v9
- use lowercase for dt example.
changes in v8
- change get_pair_priv_size to pair_priv_size variable
changes in v7
- updated according to Nicoin's comments.
- add get_pair_priv_size to replace PAIR_PRIVATE_SIZE
changes in v6
- updated according to Nicoin's and Rob's comments.
changes in v5
- Add new property fsl,asrc-format, rather than change fsl,asrc-width
to fsl,asrc-formt.
- code change for above change.
changes in v4
- Add several commit for changing DT binding asrc-width to asrc-format
- rename asrc_priv to asrc
changes in v3
- add new commit "ASoC: fsl_asrc: Change asrc_width to asrc_format"
- modify binding doc to yaml format
- remove fsl_easrc_dma.c, make fsl_asrc_dma.c useable for easrc.
changes in v2
- change i.MX815 to i.MX8MN
- Add changes in Kconfig and Makefile
Mark Brown [Tue, 21 Apr 2020 18:22:08 +0000 (19:22 +0100)]
Merge series "ASoC: add snd_compress_ops and replace" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Hi Mark
Current snd_soc_component_driver has compr_ops,
but it is created for ALSA, not for ALSA SoC.
This means it doesn't know the callback is for which component,
thus, each callback needs to get component via lookup function.
It is not good design, and will not work in the future,
because ASoC can have multipul same name component which
current lookup function can't handle.
This v2 patch-set adds new snd_compress_ops and call
callbacks with component.
v1 is here
Link: https://lore.kernel.org/alsa-devel/87blnqpuqp.wl-kuninori.morimoto.gx@renesas.com/
Kuninori Morimoto (8):
ASoC: soc-compress: add snd_compress_ops
ASoC: codec: wm_adsp: use snd_compress_ops
ASoC: uniphier: use snd_compress_ops
ASoC: qcom: q6sp6: use snd_compress_ops
ASoC: intel: atom: use snd_compress_ops
ASoC: sof: use snd_compress_ops
ASoC: sprd: use snd_compress_ops
ASoC: soc-compress: remove snd_compr_ops
The ZL38060 is a "Connected Home Audio Processor" from Microsemi,
which consists of a Digital Signal Processor (DSP), several Digital
Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs.
This driver supports only a tiny subset of the chip's functionality
and possible configurations:
- bypass mode (whole dsp block is bypassed)
- chip's I2S DAI routed directly to/from DACs and microphone
- chip's internal clock is driven by a 12 MHz external crystal
- chip's DAI connected to CPU is I2S, and bit + frame clock master
- chip must be strapped for "host boot": in this mode, firmware will
be provided by this driver.
snd_compr_ops couldn't care called component,
but now we can care it via snd_compress_ops.
All drivers switched to it.
This patch removes snd_compr_ops.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87lfmqvdig.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_component_driver has compr_ops, and each driver can
have callback via it. But, it is mainly created for ALSA, thus, it
doesn't have "component" as parameter.
Thus, each callback can't know it is called for which component.
Each callback currently is getting "component" by using
snd_soc_rtdcom_lookup() with driver name.
It works today, but, will not work in the future if we support multi
CPU/Codec/Platform, because 1 rtd might have multiple same driver
name component.
To solve this issue, each callback need to be called with component.
We already have many component driver callbacks.
This patch adds new snd_compress_ops, and call it with "component".
--- driver ---
static int xxx_open(struct snd_soc_component *component,
struct snd_compr_stream *stream)
{
=> /* it don't need to use snd_soc_rtdcom_lookup() */
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87v9luvdmh.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
Shengjiu Wang [Thu, 16 Apr 2020 12:25:37 +0000 (20:25 +0800)]
ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers
EASRC (Enhanced Asynchronous Sample Rate Converter) is a new IP module
found on i.MX8MN. It is different with old ASRC module.
The primary features for the EASRC are as follows:
- 4 Contexts - groups of channels with an independent time base
- Fully independent and concurrent context control
- Simultaneous processing of up to 32 audio channels
- Programmable filter charachteristics for each context
- 32, 24, 20, and 16-bit fixed point audio sample support
- 32-bit floating point audio sample support
- 8kHz to 384kHz sample rate
- 1/16 to 8x sample rate conversion ratio
Shengjiu Wang [Thu, 16 Apr 2020 12:25:35 +0000 (20:25 +0800)]
ASoC: fsl_asrc: Move common definition to fsl_asrc_common
There is a new ASRC included in i.MX serial platform, there
are some common definition can be shared with each other.
So move the common definition to a separate header file.
And add fsl_asrc_pair_priv and fsl_asrc_priv for
the variable specific for the module, which can be used
internally.
Shengjiu Wang [Thu, 16 Apr 2020 12:25:34 +0000 (20:25 +0800)]
ASoC: fsl_asrc: Support new property fsl,asrc-format
In order to align with new ESARC, we add new property fsl,asrc-format.
The fsl,asrc-format can replace the fsl,asrc-width, driver
can accept format from devicetree, don't need to convert it to
format through width.
Shengjiu Wang [Thu, 16 Apr 2020 12:25:33 +0000 (20:25 +0800)]
ASoC: fsl-asoc-card: Support new property fsl, asrc-format
In order to align with new ESARC, we add new property fsl,asrc-format.
The fsl,asrc-format can replace the fsl,asrc-width, driver
can accept format from devicetree, don't need to convert it to
format through width.
Shengjiu Wang [Thu, 16 Apr 2020 12:25:32 +0000 (20:25 +0800)]
ASoC: dt-bindings: fsl_asrc: Add new property fsl, asrc-format
In order to support new EASRC and simplify the code structure,
We decide to share the common structure between them. This bring
a problem that EASRC accept format directly from devicetree, but
ASRC accept width from devicetree.
In order to align with new ESARC, we add new property fsl,asrc-format.
The fsl,asrc-format can replace the fsl,asrc-width, then driver
can accept format from devicetree, don't need to convert it to
format through width.
Shengjiu Wang [Thu, 16 Apr 2020 12:25:31 +0000 (20:25 +0800)]
ASoC: fsl_asrc: rename asrc_priv to asrc
In order to move common structure to fsl_asrc_common.h
we change the name of asrc_priv to asrc, the asrc_priv
will be used by new struct fsl_asrc_priv.
ASoC: tegra: Enable audio mclk during tegra_asoc_utils_init()
Tegra PMC clock clk_out_1 is dedicated for audio mclk from Tegra30
through Tegra210 and currently Tegra clock driver keeps the audio mclk
enabled.
With the move of PMC clocks from clock driver into pmc driver, audio
mclk enable from clock driver is removed and this should be taken care
of by the audio driver.
tegra_asoc_utils_init() calls tegra_asoc_utils_set_rate() and audio mclk
rate configuration is not needed during init and the rate is actually
set during the ->hw_params() callback.
So, this patch removes tegra_asoc_utils_set_rate() call and just leaves
the audio mclk enabled.
Tegra PMC clock clk_out_1 is dedicated for audio mclk from Tegra30
through Tegra210 and currently Tegra clock driver does the initial
parent configuration for audio mclk and keeps it enabled by default.
With the move of PMC clocks from clock driver into PMC driver, audio
clocks parent configuration can be specified through the device tree
using assigned-clock-parents property and audio mclk control should be
taken care of by the audio driver.
This patch has implementation for parent configuration when default
parent configuration through assigned-clock-parents property is not
specified in the device tree.
ASoC: nau8825: Change Tegra clk_out_2 provider to PMC
Tegra clk_out_1, clk_out_2, and clk_out_3 are part of PMC block and
these clocks are moved from the clock driver to PMC driver with PMC as
a provider for these clocks.
Update bindings document to use PMC as clock provider for clk_out_2 and
change ID to PMC clock ID.
ASoC: tegra: Use device managed resource APIs to get the clock
tegra_asoc_utils uses clk_get() to get the clock and clk_put() to free
them explicitly.
This patch updates it to use device managed resource API devm_clk_get()
so the clock will be automatically released and freed when the device is
unbound and removes tegra_asoc_utils_fini() as its no longer needed.
Shengjiu Wang [Tue, 21 Apr 2020 11:28:45 +0000 (19:28 +0800)]
ASoC: wm8960: Fix wrong clock after suspend & resume
After suspend & resume, wm8960_hw_params may be called when
bias_level is not SND_SOC_BIAS_ON, then wm8960_configure_clocking
is not called. But if sample rate is changed at that time, then
the output clock rate will be not correct.
So judgement of bias_level is SND_SOC_BIAS_ON in wm8960_hw_params
is not necessary and it causes above issue.
projects / mirror_ubuntu-jammy-kernel.git / log