media: atomisp: Prepare sensor support for ACPI PM
Add support code for this driver to use ACPI power management.
Yet, at least with known devices, this won't work without
further changes.
The rationale is that the ACPI handling code checks for the _PR? tables
in order to know what is required to switch the device from power state
D0 (_PR0) up to D3COLD (_PR3).
The adev->flags.power_manageable is set to true if the device has a _PR0
table, which can be checked by calling acpi_device_power_manageable(adev).
However, this only says that the device can be set to power off mode.
At least on the DSDT tables we've seen so far, there's no _PR3 nor _PS3
(which would have a somewhat similar effect).
So, using ACPI for power management won't work, except if adding
an ACPI override logic somewhere.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: atomisp: reorganize the code under gmin_subdev_add()
The gmin_subdev_add() currently doesn't use ACPI device
power management. In order to prepare for adding support
for it, let's shift some things, placing the PM-related
stuff at the end of the probing logic.
Let's also store the current gs on a temporary var, in
order to simplify the source code.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jonas Karlman [Fri, 22 May 2020 20:21:33 +0000 (22:21 +0200)]
media: rkvdec: Fix H264 scaling list order
The Rockchip Video Decoder driver is expecting that the values in a
scaling list are in zig-zag order and applies the inverse scanning process
to get the values in matrix order.
Commit 0b0393d59eb4 ("media: uapi: h264: clarify expected
scaling_list_4x4/8x8 order") clarified that the values in the scaling list
should already be in matrix order.
Fix this by removing the reordering and change to use two memcpy.
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
[hverkuil-cisco@xs4all.nl: rkvdec_scaling_matrix -> rkvdec_h264_scaling_list] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Wed, 27 May 2020 08:23:34 +0000 (10:23 +0200)]
media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size
Commit 9495b7e92f716ab2bd6814fab5e97ab4a39adfdd ("driver core: platform:
Initialize dma_parms for platform devices") in v5.7-rc5 causes
vb2_dma_contig_clear_max_seg_size() to kfree memory that was not
allocated by vb2_dma_contig_set_max_seg_size().
The assumption in vb2_dma_contig_set_max_seg_size() seems to be that
dev->dma_parms is always NULL when the driver is probed, and the case
where dev->dma_parms has bee initialized by someone else than the driver
(by calling vb2_dma_contig_set_max_seg_size) will cause a failure.
All the current users of these functions are platform devices, which now
always have dma_parms set by the driver core. To fix the issue for v5.7,
make vb2_dma_contig_set_max_seg_size() return an error if dma_parms is
NULL to be on the safe side, and remove the kfree code from
vb2_dma_contig_clear_max_seg_size().
For v5.8 we should remove the two functions and move the
dma_set_max_seg_size() calls into the drivers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Fixes: 9495b7e92f71 ("driver core: platform: Initialize dma_parms for platform devices") Cc: stable@vger.kernel.org Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Michael Rodin [Wed, 27 May 2020 16:21:32 +0000 (18:21 +0200)]
media: v4l2-subdev.rst: correct information about v4l2 events
Remove description of non-existing v4l2_subdev.nevents and replace the
undefined flag V4L2_SUBDEV_USES_EVENTS by the correct flag
V4L2_SUBDEV_FL_HAS_EVENTS, which is already documented in v4l2_subdev.flags
Marek Szyprowski [Thu, 28 May 2020 14:03:26 +0000 (16:03 +0200)]
media: s5p-mfc: Properly handle dma_parms for the allocated devices
Commit 9495b7e92f71 ("driver core: platform: Initialize dma_parms for
platform devices") in v5.7-rc5 added allocation of dma_parms structure to
all platform devices. Then vb2_dma_contig_set_max_seg_size() have been
changed not to allocate dma_parms structure and rely on the one allocated
by the device core. Lets allocate the needed structure also for the
devices created for the 2 MFC device memory ports.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Fixes: 9495b7e92f71 ("driver core: platform: Initialize dma_parms for platform devices") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT
Recently, MEDIA_CEC_SUPPORT became indepedent of MEDIA_SUPPORT.
However, if MEDIA_SUPPORT is not enabled, MEDIA_SUPPORT_FILTER is not
defined, and MEDIA_CEC_SUPPORT is thus enabled by default, which is not
desirable.
Fix this by adding a dependency on MEDIA_CEC_SUPPORT to the default
configuration.
Fixes: 46d2a3b964ddbe63 ("media: place CEC menu before MEDIA_SUPPORT") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Samuel Holland [Sat, 9 May 2020 20:06:42 +0000 (22:06 +0200)]
media: cedrus: Program output format during each run
Previously, the output format was programmed as part of the ioctl()
handler. However, this has two problems:
1) If there are multiple active streams with different output
formats, the hardware will use whichever format was set last
for both streams. Similarly, an ioctl() done in an inactive
context will wrongly affect other active contexts.
2) The registers are written while the device is not actively
streaming. To enable runtime PM tied to the streaming state,
all hardware access needs to be moved inside cedrus_device_run().
The call to cedrus_dst_format_set() is now placed just before the
codec-specific callback that programs the hardware.
media: atomisp: improve sensor detection code to use _DSM table
Instead of keep hardcoding device-specific tables, read them
directly from the ACPI BIOS, if available.
This method is know to work with Asus T101HA device. the
same table is also visible on EzPad devices. So, it seems
that at least some BIOSes use this method to pass data about
ISP2401-connected sensors.
media: atomisp: get rid of an iomem abstraction layer
The hive_isp_css_custom_host_hrt.h code, together
with atomisp_helper.h, provides an abstraction layer for
some functions inside atomisp_compat_css20.c and atomisp_cmd.c.
There's no good reason for that. In a matter of fact, after
removing the abstraction, the code looked a lot cleaner
and easier to understand.
So, get rid of them.
While here, get rid also of the udelay(1) abstraction code.
There are several parts of the driver that could produce
a "dfs failed!" message. Change the texts, in order to help
identifying from where they're coming.
media: atomisp: change the detection of ISP2401 at runtime
Instead of having a static var to detect it, let's use the
already-existing arch-specific bytes, as this is how other
parts of the code also checks when it needs to do something
different, depending on an specific chipset version.
media: atomisp: don't set hpll_freq twice with different values
The logic which sets the hpll_freq for BYT sets hpll_freq
to 1600MHz, but ignores it, and sets it again after reading
from-device-specific EFI vars (this time, using a default
of 2000MHz).
Remove the first set, as this will be overriden anyway.
While here, do minor adjustments on comments and on a
printk message.
Well, this is something that we don't have upstream. So,
without further details about that, we can't really parse it.
If we ever end supporting those devices with the upstream driver,
this patch can be reverted and the device can be detected
via DMI (or maybe via PCI ID?).
There are lots of mess with IRQ ifdef settings. As the
*_global.h will already detect the type of IRQ system at
compile time, we can get rid of them, replacing by just
one ifdef for ISP2401.
Arnd Bergmann [Fri, 29 May 2020 20:00:27 +0000 (22:00 +0200)]
media: staging: media: atomisp: fix stack overflow in init_pipe_defaults()
When building with clang, multiple copies of the structures to be
initialized are passed around on the stack and copied locally, using an
insane amount of stack space:
drivers/staging/media/atomisp/pci/sh_css.c:2371:1: error: stack frame size of 26864 bytes in function 'create_pipe' [-Werror,-Wframe-larger-than=]
Use constantly-allocated variables plus an explicit memcpy()
to avoid that.
Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Fixes: 6dc9a2568f84 ("media: atomisp: convert default struct values to use compound-literals with designated initializers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Fri, 29 May 2020 20:00:30 +0000 (22:00 +0200)]
media: staging: media: atomisp: disable all custom formats
clang points out the usage of an incorrect enum type in the
list of supported image formats:
drivers/staging/media/atomisp/pci/atomisp_subdev.c:49:65: error: implicit conversion from enumeration type 'enum ia_css_frame_format' to different enumeration type 'enum atomisp_input_format' [-Werror,-Wenum-conversion]
{ V4L2_MBUS_FMT_CUSTOM_NV21, 12, 12, CSS_FRAME_FORMAT_NV21, 0, CSS_FRAME_FORMAT_NV21 },
drivers/staging/media/atomisp/pci/atomisp_subdev.c:49:39: error: implicit conversion from enumeration type 'enum ia_css_frame_format' to different enumeration type 'enum atomisp_input_format' [-Werror,-Wenum-conversion]
{ V4L2_MBUS_FMT_CUSTOM_NV21, 12, 12, CSS_FRAME_FORMAT_NV21, 0, CSS_FRAME_FORMAT_NV21 },
{ V4L2_MBUS_FMT_CUSTOM_NV12, 12, 12, CSS_FRAME_FORMAT_NV12, 0, CSS_FRAME_FORMAT_NV12 },
{ MEDIA_BUS_FMT_JPEG_1X8, 8, 8, CSS_FRAME_FORMAT_BINARY_8, 0, ATOMISP_INPUT_FORMAT_BINARY_8 },
Checking the git history, I found a commit that disabled one such case
because it did not work. It seems likely that the incorrect enum was
part of the original problem and that the others do not work either,
or have never been tested.
Arnd Bergmann [Fri, 29 May 2020 20:00:29 +0000 (22:00 +0200)]
media: staging: media: atomisp: fix enum type mixups
Some function calls pass an incorrect enum type:
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:858:16: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
gp_device_rst(INPUT_SYSTEM0_ID);
~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:860:19: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
input_switch_rst(INPUT_SYSTEM0_ID);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:876:27: error: implicit conversion from enumeration type 'input_system_cfg_flag_t' to different enumeration type 'input_system_connection_t' [-Werror,-Wenum-conversion]
config.multicast[i] = INPUT_SYSTEM_CFG_FLAG_RESET;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:1326:32: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
input_selector_cfg_for_sensor(INPUT_SYSTEM0_ID);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:1329:19: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
input_switch_cfg(INPUT_SYSTEM0_ID, &config.input_switch_cfg);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
INPUT_SYSTEM0_ID is zero, so use the corresponding zero-value
of the expected types instead.
Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Fri, 29 May 2020 20:00:24 +0000 (22:00 +0200)]
media: staging: media: atomisp: declare 'struct device' before using it
In some configurations, including this header leads to a warning:
drivers/staging/media/atomisp//pci/sh_css_firmware.h:41:38: error: declaration of 'struct device' will not be visible outside of this function [-Werror,-Wvisibility]
Make sure the struct tag is known before declaring a function
that uses it as an argument.
This driver is licensed under GPL 2.0, as stated inside their
headers.
Add the proper tag there. We should probably latter cleanup
the reduntant licensing text, but this could be done later,
after we get rid of other abstraction layers.
The struct atomisp_overlay contains overlay_start_x and overlay_start_y
fields. Instead of copying the value of the overlay_start_x field between
the two structs, the value of the overlay_start_y field of the compat
struct was copied to the overlay_start_x field of the 64-bit kernel struct
in get operation and back in put. The overlay_start_x field value was not
copied from or to the user space struct.
Fix this so that the value of overlay_start_x is copied to overlay_start_x
and the value of overlay_start_y is copied to overlay_start_y.
Also do copy blend_overlay_perc_u field only once.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: atomisp: get rid of an error abstraction layer
There is an abstraction layer there meant to convert to
the Linux standard error codes. As the driver now use
such errors everywhere. we can get rid of this.
The atomisp driver has its own error codes under the
ia_css_err.h file. On several places, those got already
replaced by standard error codes, but there are still a
lot more to be fixed.
Let's get rid of all of those, mapping them into
the already-existing set of Linux error codes.
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c:1707:64:
warning: implicit conversion from enumeration type 'const enum
ia_css_frame_format' to different enumeration type 'enum
atomisp_input_format' [-Wenum-conversion]
binary_supports_input_format(xcandidate, req_in_info->format));
~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~^~~~~~
As it turns out, binary_supports_input_format only asserts that
xcandidate is not NULL and just returns true so this call is never
actually made.
There are other functions that are called that assert info is not NULL
so this function actually serves no purpose. Remove it. It can be
brought back if needed later.
media: atomisp: Avoid overflow in compute_blending
Clang warns:
drivers/staging/media/atomisp/pci/isp/kernels/xnr/xnr_3.0/ia_css_xnr3.host.c:129:35:
warning: implicit conversion from 'unsigned long' to 'int32_t' (aka
'int') changes value from 18446744073709543424 to -8192
[-Wconstant-conversion]
return MAX(MIN(isp_strength, 0), -XNR_BLENDING_SCALE_FACTOR);
~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
XNR_BLENDING_SCALE_FACTOR is BIT(13), or 8192, which will easily fit
into a signed 32-bit integer. However, it is an unsigned long, which
means that negating it is the same as subtracting that value from
ULONG_MAX + 1, which causes it to be larger than a signed 32-bit
integer so it gets implicitly converted.
We can avoid this by using the variable isp_scale, which holds the value
of XNR_BLENDING_SCALE_FACTOR already, where the implicit conversion from
unsigned long to s32 already happened. If that were to ever overflow,
clang would warn: https://godbolt.org/z/EeSxLG
media: atomisp: Remove unnecessary NULL check in atomisp_param
Clang warns:
drivers/staging/media/atomisp/pci/atomisp_cmd.c:4278:17: warning:
address of 'config->info' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (!&config->info) {
~ ~~~~~~~~^~~~
config cannot be NULL because it comes from an ioctl, which ensures that
the user is not giving us an invalid pointer through copy_from_user. If
config is not NULL, info cannot be NULL. Remove this check.
media: atomisp: Remove unnecessary NULL checks in ia_css_pipe_load_extension
Clang warns:
../drivers/staging/media/atomisp/pci/sh_css.c:8537:14: warning: address
of 'pipe->output_stage' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (&pipe->output_stage)
~~ ~~~~~~^~~~~~~~~~~~
../drivers/staging/media/atomisp/pci/sh_css.c:8545:14: warning: address
of 'pipe->vf_stage' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (&pipe->vf_stage)
~~ ~~~~~~^~~~~~~~
output_stage and vf_stage are pointers in the middle of a struct, their
addresses cannot be NULL if pipe is not NULL and pipe is already checked
for NULL in this function. Simplify this if block.
media: atomisp: Remove second increment of count in atomisp_subdev_probe
Clang warns:
../drivers/staging/media/atomisp/pci/atomisp_v4l2.c:1097:3: warning:
variable 'count' is incremented both in the loop header and in the loop
body [-Wfor-loop-analysis]
count++;
^
media: atomisp: Clean up if block in sh_css_sp_init_stage
Clang warns:
../drivers/staging/media/atomisp/pci/sh_css_sp.c:1039:23: warning:
address of 'binary->in_frame_info' will always evaluate to 'true'
[-Wpointer-bool-conversion]
} else if (&binary->in_frame_info) {
~~ ~~~~~~~~^~~~~~~~~~~~~
in_frame_info is not a pointer so if binary is not NULL, in_frame_info's
address cannot be NULL. Change this to an else since it will always be
evaluated as one.
While we are here, clean up this if block. The contents of both if
blocks are the same but a check against "stage == 0" is added when
ISP2401 is defined. USE_INPUT_SYSTEM_VERSION_2401 is only defined when
isp2401_system_global.h is included, which only happens when ISP2401. In
other words, USE_INPUT_SYSTEM_VERSION_2401 always requires ISP2401 to be
defined so the '#ifndef ISP2401' makes no sense. Remove that part of the
block to simplify everything.
media: atomisp: add more comments about frame allocation
The frame allocation logic happens differently for userptr
or normal mmap. On a quick look, this sounded to be unbalanced,
but the logic should actually work for both cases.
Colin Ian King [Thu, 21 May 2020 19:44:32 +0000 (21:44 +0200)]
media: atomisp: fix a handful of spelling mistakes
There are several spelling mistakes in various messages and literal
strings. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In other words, we have:
MAX_NUM_VIDEO_DELAY_FRAMES = 3
MAX_NUM_DELAY_FRAMES = 2
The MAX_NUM_DELAY_FRAMES macro is used only only when allocating
memory. On all other parts, including looping over such array,
MAX_NUM_VIDEO_DELAY_FRAMES is used instead, like:
void sh_css_binary_args_reset(struct sh_css_binary_args *args)
{
unsigned int i;
...
for (i = 0; i < MAX_NUM_VIDEO_DELAY_FRAMES; i++)
args->delay_frames[i] = NULL;
Which will cause buffer overflows, with may override the next array
(tnr_frames[]).
In practice, this may not be causing real issues, as the code
checks for num_delay_frames on some parts (but not everywhere).
So, get rid of the smallest value.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some arguments for tnf and ref settings are meant to be const, but
they're defined without such annotation. Due to that, there's an
ugly cast at sh_css_sp.c.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: atomisp: get rid of some old broken debug code
It sounds that someone once changed the debug level at compile
time for some testing, but forgot to remove the legacy code after
finishing debuging it.
Get rid of the dead code.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: atomisp: don't flood dmesg with -EAGAIN return codes
Using DQBUF on non-blocking mode will return -EAGAIN
if nothing arrives. Printing it has no value, even for debug
purposes. So, only display real return codes.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Flooding the dmesg with lots of messages per second. The same
pattern happens for all other IRQs.
Change the logic for printing just one message per IRQ and
rate-limit those, as, for debugging purposes, it is usually
interesting to know that IRQs are being received, but not
displaying every single one.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
projects / mirror_ubuntu-kernels.git / log