Since commit ebd457d55911 ("iio: light: vcnl4000 add devicetree hooks")
the of_match_table is supported but the data shouldn't be a string.
Instead it shall be one of 'enum vcnl4000_device_ids'. Also the matching
logic for the vcnl4020 was wrong. Since the data retrieve mechanism is
still based on the i2c_device_id no failures did appeared till now.
ACPI 6.3 adds a thread flag to represent if a CPU/PE is
actually a thread. Given that the MPIDR_MT bit may not
represent this information consistently on homogeneous machines
we should prefer the PPTT flag if its available.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Robert Richter <rrichter@marvell.com>
[will: made acpi_cpu_is_threaded() return 'bool'] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
ACPI 6.3 adds a flag to the CPU node to indicate whether
the given PE is a thread. Add a function to return that
information for a given linux logical CPU.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Robert Richter <rrichter@marvell.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
A Golang developer reported MIPS hwcap isn't reflecting instructions
that the processor actually supported so programs can't apply optimized
code at runtime.
Thus we export the ASEs that can be used in userspace programs.
GCC 9.x automatically enables support for Loongson MMI instructions when
using some -march= flags, and then errors out when -msoft-float is
specified with:
cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’
The kernel shouldn't be using these MMI instructions anyway, just as it
doesn't use floating point instructions. Explicitly disable them in
order to fix the build with GCC 9.x.
Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 3702bba5eb4f ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E") Fixes: 6f7a251a259e ("MIPS: Loongson: Add basic Loongson 2F support") Fixes: 5188129b8c9f ("MIPS: Loongson-3: Improve -march option and move it to Platform") Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: stable@vger.kernel.org # v2.6.32+ Cc: linux-mips@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When a series of O_DIRECT reads or writes are truncated, either due to
eof or due to an error, then we should return the number of contiguous
bytes that were received/sent starting at the offset specified by the
application.
Currently, we are failing to correctly check contiguity, and so we're
failing the generic/465 in xfstests when the race between the read
and write RPCs causes the file to get extended while the 2 reads are
outstanding. If the first read RPC call wins the race and returns with
eof set, we should treat the second read RPC as being truncated.
Reported-by: Su Yanjun <suyj.fnst@cn.fujitsu.com> Fixes: 1ccbad9f9f9bd ("nfs: fix DIO good bytes calculation") Cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Coverity caught a case where we could return with a uninitialized value
in ret in process_leaf. This is actually pretty likely because we could
very easily run into a block group item key and have a garbage value in
ret and think there was an errror. Fix this by initializing ret to 0.
Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: fd708b81d972 ("Btrfs: add a extent ref verify tool") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
We've historically had reports of being unable to mount file systems
because the tree log root couldn't be read. Usually this is the "parent
transid failure", but could be any of the related errors, including
"fsid mismatch" or "bad tree block", depending on which block got
allocated.
The modification of the individual log root items are serialized on the
per-log root root_mutex. This means that any modification to the
per-subvol log root_item is completely protected.
However we update the root item in the log root tree outside of the log
root tree log_mutex. We do this in order to allow multiple subvolumes
to be updated in each log transaction.
This is problematic however because when we are writing the log root
tree out we update the super block with the _current_ log root node
information. Since these two operations happen independently of each
other, you can end up updating the log root tree in between writing out
the dirty blocks and setting the super block to point at the current
root.
This means we'll point at the new root node that hasn't been written
out, instead of the one we should be pointing at. Thus whatever garbage
or old block we end up pointing at complains when we mount the file
system later and try to replay the log.
Fix this by copying the log's root item into a local root item copy.
Then once we're safely under the log_root_tree->log_mutex we update the
root item in the log_root_tree. This way we do not modify the
log_root_tree while we're committing it, fixing the problem.
CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Chris Mason <clm@fb.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When we have a buffered write that starts at an offset greater than or
equals to the file's size happening concurrently with a full ranged
fiemap, we can end up leaking an extent state structure.
Suppose we have a file with a size of 1Mb, and before the buffered write
and fiemap are performed, it has a single extent state in its io tree
representing the range from 0 to 1Mb, with the EXTENT_DELALLOC bit set.
The following sequence diagram shows how the memory leak happens if a
fiemap a buffered write, starting at offset 1Mb and with a length of
4Kb, are performed concurrently.
CPU 1 CPU 2
extent_fiemap()
--> it's a full ranged fiemap
range from 0 to LLONG_MAX - 1
(9223372036854775807)
--> locks range in the inode's
io tree
--> after this we have 2 extent
states in the io tree:
--> 1 for range [0, 1Mb[ with
the bits EXTENT_LOCKED and
EXTENT_DELALLOC_BITS set
--> 1 for the range
[1Mb, LLONG_MAX[ with
the EXTENT_LOCKED bit set
--> start buffered write at offset
1Mb with a length of 4Kb
btrfs_file_write_iter()
btrfs_buffered_write()
--> cached_state is NULL
lock_and_cleanup_extent_if_need()
--> returns 0 and does not lock
range because it starts
at current i_size / eof
--> splits extent state for range
[1Mb, LLONG_MAX[ and now we
have 2 extent states:
--> one for the range
[1Mb, 1Mb + 4Kb[ with
EXTENT_LOCKED set
--> another one for the range
[1Mb + 4Kb, LLONG_MAX[ with
EXTENT_LOCKED set as well
--> sets EXTENT_DELALLOC on the
extent state for the range
[1Mb, 1Mb + 4Kb[
--> caches extent state
[1Mb, 1Mb + 4Kb[ into
@cached_state because it has
the bit EXTENT_LOCKED set
--> btrfs_buffered_write() ends up
with a non-NULL cached_state and
never calls anything to release its
reference on it, resulting in a
memory leak
Fix this by calling free_extent_state() on cached_state if the range was
not locked by lock_and_cleanup_extent_if_need().
The same issue can happen if anything else other than fiemap locks a range
that covers eof and beyond.
This could be triggered, sporadically, by test case generic/561 from the
fstests suite, which makes duperemove run concurrently with fsstress, and
duperemove does plenty of calls to fiemap. When CONFIG_BTRFS_DEBUG is set
the leak is reported in dmesg/syslog when removing the btrfs module with
a message like the following:
[77100.039461] BTRFS: state leak: start 6574080 end 6582271 state 16402 in tree 0 refs 1
Otherwise (CONFIG_BTRFS_DEBUG not set) detectable with kmemleak.
CC: stable@vger.kernel.org # 4.16+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
on a Raspberry Pi produces the following kernel message:
BTRFS error (device mmcblk0p2): balance: invalid convert data profile single
This fails because we use is_power_of_2(unsigned long) to validate
the new data profile, the constant for 'single' profile uses bit 48,
and there are only 32 bits in a long on ARM.
Fix by open-coding the check using u64 variables.
Tested by completing the original balance command on several Raspberry
Pis.
Fixes: 818255feece6 ("btrfs: use common helper instead of open coding a bit test") CC: stable@vger.kernel.org # 4.20+ Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
[BUG]
One user reported a reproducible KASAN report about use-after-free:
BTRFS info (device sdi1): balance: start -dvrange=1256811659264..1256811659265
BTRFS info (device sdi1): relocating block group 1256811659264 flags data|raid0
==================================================================
BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
Write of size 8 at addr ffff88856f671710 by task kworker/u24:10/261579
[CAUSE]
The problem happens when finish_ordered_io() get called with balance
still running, while the reloc root of that subvolume is already dead.
(Tree is swap already done, but tree not yet deleted for possible qgroup
usage.)
That means root->reloc_root still exists, but that reloc_root can be
under btrfs_drop_snapshot(), thus we shouldn't access it.
The following race could cause the use-after-free problem:
- Test if the root has dead reloc tree before accessing root->reloc_root
If the root has BTRFS_ROOT_DEAD_RELOC_TREE, then we don't need to
create or update root->reloc_tree
- Clear the BTRFS_ROOT_DEAD_RELOC_TREE flag until we have fully dropped
reloc tree
To co-operate with above modification, so as long as
BTRFS_ROOT_DEAD_RELOC_TREE is still set, we won't try to re-create
reloc tree at record_root_in_trans().
Reported-by: Cebtenzzre <cebtenzzre@gmail.com> Fixes: d2311e698578 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") CC: stable@vger.kernel.org # 5.1+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When emulating open-drain/open-source by not actively driving the output
lines - we're simply changing their mode to input. This is wrong as it
will then make it impossible to change the value of such line - it's now
considered to actually be in input mode. If we want to still use the
direction_input() callback for simplicity then we need to set FLAG_IS_OUT
manually in gpiod_direction_output() and not clear it in
gpio_set_open_drain_value_commit() and
gpio_set_open_source_value_commit().
Since commit ec757001c818 ("gpio: Enable nonexclusive gpiods from DT
nodes") we are able to get GPIOD_FLAGS_BIT_NONEXCLUSIVE marked gpios.
Currently the gpiolib uses the wrong flags variable for the check. We
need to check the gpiod_flags instead of the of_gpio_flags else we
return -EBUSY for GPIOD_FLAGS_BIT_NONEXCLUSIVE marked and requested
gpiod's.
Fixes: ec757001c818 gpio: Enable nonexclusive gpiods from DT nodes Cc: stable@vger.kernel.org Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
[Bartosz: the function was moved to gpiolib-of.c so updated the patch] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Bartosz: backported to v5.3.y] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Commit 4b708b7b1a2c ("firmware: google: check if size is valid when
decoding VPD data") adds length checks, but the new vpd_decode_entry()
function botched the logic -- it adds the key length twice, instead of
adding the key and value lengths separately.
On my local system, this means vpd.c's vpd_section_create_attribs() hits
an error case after the first attribute it parses, since it's no longer
looking at the correct offset. With this patch, I'm back to seeing all
the correct attributes in /sys/firmware/vpd/...
Fixes: 4b708b7b1a2c ("firmware: google: check if size is valid when decoding VPD data") Cc: <stable@vger.kernel.org> Cc: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20190930214522.240680-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
rdma_for_each_port is already incrementing the iterator's value it
receives therefore, after the first iteration the iterator is increased by
2 which eventually causing wrong queries and possible traces.
Fix the above by removing the old redundant incrementation that was used
before rdma_for_each_port() macro.
Cc: <stable@vger.kernel.org> Fixes: ea1075edcbab ("RDMA: Add and use rdma_for_each_port") Link: https://lore.kernel.org/r/20191002122127.17571-1-leon@kernel.org Signed-off-by: Mohamad Heib <mohamadh@mellanox.com> Reviewed-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
On architectures like s390, arch_free_page() could mark the page unused
(set_page_unused()) and any access later would trigger a kernel panic.
Fix it by moving arch_free_page() after all possible accessing calls.
In the past, only kernel_poison_pages() would trigger this but it needs
"page_poison=on" kernel cmdline, and I suspect nobody tested that on
s390. Recently, kernel_init_free_pages() (commit 6471384af2a6 ("mm:
security: introduce init_on_alloc=1 and init_on_free=1 boot options"))
was added and could trigger this as well.
[akpm@linux-foundation.org: add comment] Link: http://lkml.kernel.org/r/1569613623-16820-1-git-send-email-cai@lca.pw Fixes: 8823b1dbc05f ("mm/page_poison.c: enable PAGE_POISONING as a separate option") Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: <stable@vger.kernel.org> [5.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
There's a really hard to reproduce race in z3fold between z3fold_free()
and z3fold_reclaim_page(). z3fold_reclaim_page() can claim the page
after z3fold_free() has checked if the page was claimed and
z3fold_free() will then schedule this page for compaction which may in
turn lead to random page faults (since that page would have been
reclaimed by then).
Fix that by claiming page in the beginning of z3fold_free() and not
forgetting to clear the claim in the end.
Partially revert 16db3d3f1170 ("kernel/sysctl.c: threads-max observe
limits") because the patch is causing a regression to any workload which
needs to override the auto-tuning of the limit provided by kernel.
set_max_threads is implementing a boot time guesstimate to provide a
sensible limit of the concurrently running threads so that runaways will
not deplete all the memory. This is a good thing in general but there
are workloads which might need to increase this limit for an application
to run (reportedly WebSpher MQ is affected) and that is simply not
possible after the mentioned change. It is also very dubious to
override an admin decision by an estimation that doesn't have any direct
relation to correctness of the kernel operation.
Fix this by dropping set_max_threads from sysctl_max_threads so any
value is accepted as long as it fits into MAX_THREADS which is important
to check because allowing more threads could break internal robust futex
restriction. While at it, do not use MIN_THREADS as the lower boundary
because it is also only a heuristic for automatic estimation and admin
might have a good reason to stop new threads to be created even when
below this limit.
This became more severe when we switched x86 from 4k to 8k kernel
stacks. Starting since 6538b8ea886e ("x86_64: expand kernel stack to
16K") (3.16) we use THREAD_SIZE_ORDER = 2 and that halved the auto-tuned
value.
In the particular case
3.12
kernel.threads-max = 515561
4.4
kernel.threads-max = 200000
Neither of the two values is really insane on 32GB machine.
I am not sure we want/need to tune the max_thread value further. If
anything the tuning should be removed altogether if proven not useful in
general. But we definitely need a way to override this auto-tuning.
Commit 487317c99477 ("cifs: add spinlock for the openFileList to
cifsInodeInfo") added cifsInodeInfo->open_file_lock spin_lock to protect
the openFileList, but missed a few places where cifs_inode->openFileList
was enumerated. Change these remaining tcon->open_file_lock to
cifsInodeInfo->open_file_lock to avoid panic in is_size_safe_to_change.
Mark inode for force revalidation if LOOKUP_REVAL flag is set.
This tells the client to actually send a QueryInfo request to
the server to obtain the latest metadata in case a directory
or a file were changed remotely. Only do that if the client
doesn't have a lease for the file to avoid unneeded round
trips to the server.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Currently the client indicates that a dentry is stale when inode
numbers or type types between a local inode and a remote file
don't match. If this is the case attributes is not being copied
from remote to local, so, it is already known that the local copy
has stale metadata. That's why the inode needs to be marked for
revalidation in order to tell the VFS to lookup the dentry again
before openning a file. This prevents unexpected stale errors
to be returned to the user space when openning a file.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Currently if the client identifies problems when processing
metadata returned in CREATE response, the open handle is being
leaked. This causes multiple problems like a file missing a lease
break by that client which causes high latencies to other clients
accessing the file. Another side-effect of this is that the file
can't be deleted.
Fix this by closing the file after the client hits an error after
the file was opened and the open descriptor wasn't returned to
the user space. Also convert -ESTALE to -EOPENSTALE to allow
the VFS to revalidate a dentry and retry the open.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
string_to_context_struct() may garble the context string, so we need to
copy back the contents again from the old context struct to avoid
storing the corrupted context.
Since string_to_context_struct() tokenizes (and therefore truncates) the
context string and we are later potentially copying it with kstrdup(),
this may eventually cause pieces of uninitialized kernel memory to be
disclosed to userspace (when copying to userspace based on the stored
length and not the null character).
How to reproduce on Fedora and similar:
# dnf install -y memcached
# systemctl start memcached
# semodule -d memcached
# load_policy
# load_policy
# systemctl stop memcached
# ausearch -m AVC
type=AVC msg=audit(1570090572.648:313): avc: denied { signal } for pid=1 comm="systemd" scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=process permissive=0 trawcon=73797374656D5F75007400000000000070BE6E847296FFFF726F6D000096FFFF76
Cc: stable@vger.kernel.org Reported-by: Milos Malik <mmalik@redhat.com> Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
As soon as we re-enable the various functions within the HW, they may go
off and read data via a GGTT offset. Hence, if we have not yet restored
the GGTT PTE before then, they may read and even *write* random locations
in memory.
Detected by DMAR faults during resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190909110011.8958-4-chris@chris-wilson.co.uk
(cherry picked from commit cec5ca08e36fd18d2939b98055346b3b06f56c6c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The kernel command line option efivar_ssdt= allows the name to be
specified of an EFI variable containing an ACPI SSDT table that should
be loaded into memory by the OS, and treated as if it was provided by
the firmware.
Currently, that code will always iterate over the EFI variables and
compare each name with the provided name, even if the command line
option wasn't set to begin with.
So bail early when no variable name was provided. This works around a
boot regression on the 2012 Mac Pro, as reported by Scott.
Tested-by: Scott Talbert <swt@techie.net> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> # v4.9+ Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Dave Young <dyoung@redhat.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Matthew Garrett <mjg59@google.com> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Cc: linux-integrity@vger.kernel.org Fixes: 475fb4e8b2f4 ("efi / ACPI: load SSTDs from EFI variables") Link: https://lkml.kernel.org/r/20191002165904.8819-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
We need to perform a reset a start up to make sure that the chip is in a
consistent state. This reset also disables all the interrupts which
should only be enabled together with the iio buffer. Not doing this, was
sometimes causing unwanted interrupts to trigger.
Signed-off-by: Stefan Popa <stefan.popa@analog.com> Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
One in two sample sets was lost by multiplying fifo_set_size with
sizeof(u16). Also, the double number of available samples were pushed to
the iio buffers.
Signed-off-by: Stefan Popa <stefan.popa@analog.com> Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Currently, the driver sets the FIFO_SAMPLES register with the number of
sample sets (maximum of 170 for 3 axis data, 256 for 2-axis and 512 for
single axis). However, the FIFO_SAMPLES register should store the number
of samples, regardless of how the FIFO format is configured.
Signed-off-by: Stefan Popa <stefan.popa@analog.com> Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Commit 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040
proximity and light sensor") added the support for the vcnl4040 but
forgot to add the of_compatible. Fix this by adding it now.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Fixes: 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor") Reviewed-by: Angus Ainslie (Purism) angus@akkea.ca Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When an end-of-conversion interrupt is received after performing a
single-shot reading of the light sensor, the driver was waking up the
result ready queue before checking opt->ok_to_ignore_lock to determine
if it should unlock the mutex. The problem occurred in the case where
the other thread woke up and changed the value of opt->ok_to_ignore_lock
to false prior to the interrupt thread performing its read of the
variable. In this case, the mutex would be unlocked twice.
Signed-off-by: David Frey <dpfrey@gmail.com> Reviewed-by: Andreas Dannenberg <dannenberg@ti.com> Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
End of conversion may be handled by using IRQ or DMA. There may be a
race when two conversions complete at the same time on several ADCs.
EOC can be read as 'set' for several ADCs, with:
- an ADC configured to use IRQs. EOCIE bit is set. The handler is normally
called in this case.
- an ADC configured to use DMA. EOCIE bit isn't set. EOC triggers the DMA
request instead. It's then automatically cleared by DMA read. But the
handler gets called due to status bit is temporarily set (IRQ triggered
by the other ADC).
So both EOC status bit in CSR and EOCIE control bit must be checked
before invoking the interrupt handler (e.g. call ISR only for
IRQ-enabled ADCs).
Move STM32 ADC registers definitions to common header.
This is precursor patch to:
- iio: adc: stm32-adc: fix a race when using several adcs with dma and irq
It keeps registers definitions as a whole block, to ease readability and
allow simple access path to EOC bits (readl) in stm32-adc-core driver.
Since commit 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") we
preserve the bias current set by the firmware at boot. This fixes issues
we were seeing on various models, but it seems our old hardcoded 80ųA bias
current was working around a firmware bug on at least one model laptop.
In order to both have our cake and eat it, this commit adds a dmi based
list of models where we need to override the firmware set bias current and
adds the one model we now know needs this to it: The Lenovo Ideapad 100S
(11 inch version).
Since commit 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe
and reset alert status on probe") the error path is wrong since it
leaves the vref regulator on. Fix this by disabling both regulators.
Fixes: 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Fix bug in sampling function hx711_cycle() when interrupt occures while
PD_SCK is high. If PD_SCK is high for at least 60 us power down mode of
the sensor is entered which in turn leads to a wrong measurement.
Switch off interrupts during a PD_SCK high period and move query of DOUT
to the latest point of time which is at the end of PD_SCK low period.
This bug exists in the driver since it's initial addition. The more
interrupts on the system the higher is the probability that it happens.
It's incorrect to compare HighestRate with 0x0b twice in the following
manner "if (HighestRate > 0x0b) ... else if (HighestRate > 0x0b) ...". The
"else if" branch is constantly false. The second comparision should be
with 0x03 according to the max_rate_idx in ODM_RAInfo_Init().
In fbtft_framebuffer_alloc the error handling path should take care of
releasing frame buffer after it is allocated via framebuffer_alloc, too.
Therefore, in two failure cases the goto destination is changed to
address this issue.
The PCM draining behavior got broken since the recent refactoring, and
this turned out to be the incorrect expectation of the firmware
behavior regarding "draining". While I expected the "drain" flag at
the stop operation would do processing the queued samples, it seems
rather dropping the samples.
As a quick fix, just drop the SNDRV_PCM_INFO_DRAIN_TRIGGER flag, so
that the driver uses the normal PCM draining procedure. Also, put
some caution comment to the function for future readers not to fall
into the same pitfall.
Commit c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor
interface") removed setting gpios via platform data. This means that
fbtft will now only work with Device Tree so set the dependency.
This also prevents a NULL pointer deref on non-DT platform because
fbtftops.request_gpios is not set in that case anymore.
The fixed MKHI client on PCH 6 gen platforms
does not support fw version retrieval.
The error is not fatal, but it fills up the kernel logs and
slows down the driver start.
This patch disables requesting FW version on GEN6 and earlier platforms.
Fixes warning:
[ 15.964298] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version
[ 15.964301] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: version command failed -5
Cc: <stable@vger.kernel.org> +v4.18 Cc: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191004181722.31374-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The driver was accessing its struct usb_device in its release()
callback without holding a reference. This would lead to a
use-after-free whenever the device was disconnected while the character
device was still open.
The driver would return with a nonzero open count in case the reset
control request failed. This would prevent any further attempts to open
the char dev until the device was disconnected.
Fix this by incrementing the open count only on successful open.
The driver is using its struct usb_device pointer as an inverted
disconnected flag, but was setting it to NULL before making sure all
completion handlers had run. This could lead to a NULL-pointer
dereference in a number of dev_dbg and dev_err statements in the
completion handlers which relies on said pointer.
Fix this by unconditionally stopping all I/O and preventing
resubmissions by poisoning the interrupt URBs at disconnect and using a
dedicated disconnected flag.
This also makes sure that all I/O has completed by the time the
disconnect callback returns.
Fix a potential deadlock if disconnect races with open.
Since commit d4ead16f50f9 ("USB: prevent char device open/deregister
race") core holds an rw-semaphore while open is called and when
releasing the minor number during deregistration. This can lead to an
ABBA deadlock if a driver takes a lock in open which it also holds
during deregistration.
This effectively reverts commit 78663ecc344b ("USB: disconnect open race
in legousbtower") which needlessly introduced this issue after a generic
fix for this race had been added to core by commit d4ead16f50f9 ("USB:
prevent char device open/deregister race").
Making sure that ucsi_displayport_enter() function does not
return an error if the displayport alternate mode has
already been entered. It's normal that the firmware (or
controller) has already entered the alternate mode by the
time the operating system is notified about the device.
Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20191004100219.71152-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The "run_isr" flag is used for preventing the driver from
calling the interrupt service routine in its runtime resume
callback when the driver is expecting completion to a
command, but what that basically does is that it hides the
real problem. The real problem is that the controller is
allowed to suspend in the middle of command execution.
As a more appropriate fix for the problem, using autosuspend
delay time that matches UCSI_TIMEOUT_MS (5s). That prevents
the controller from suspending while still in the middle of
executing a command.
This fixes a potential deadlock. Both ccg_read() and
ccg_write() are called with the mutex already taken at least
from ccg_send_command(). In ccg_read() and ccg_write, the
mutex is only acquired so that run_isr flag can be set.
The "port->typec_caps.data" and "port->typec_caps.type" variables are
enums and in this context GCC will treat them as an unsigned int so they
can never be less than zero.
Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20191001120117.GA23528@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
According to usb_ep_set_halt()'s description,
__usbhsg_ep_set_halt_wedge() should return -EAGAIN if the IN endpoint
has any queue or data. Otherwise, this driver is possible to cause
just STALL without sending a short packet data on g_mass_storage driver,
and then a few resetting a device happens on a host side during
a usb enumaration.
The commit 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area")
had added a usbhsg_pipe_disable() calling into
__usbhsg_ep_set_halt_wedge() accidentally. But, this driver should
not call the usbhsg_pipe_disable() because the function discards
all queues. So, this patch removes it.
The power budget for SuperSpeed mode should be 900 mA
according to USB specification, so set the power budget
to 900mA for dummy_start_ss which is only used for
SuperSpeed mode.
If the max power consumption of SuperSpeed device is
larger than 500 mA, insufficient available bus power
error happens in usb_choose_configuration function
when the device connects to dummy hcd.
Make sure to stop all I/O on disconnect by adding a disconnected flag
which is used to prevent new I/O from being started and by stopping all
ongoing I/O before returning.
This also fixes a potential use-after-free on driver unbind in case the
driver data is freed before the completion handler has run.
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.
Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.
Fix NULL-pointer dereferences on open() and write() which can be
triggered by a malicious USB device.
The current URB allocation helper would fail to initialise the newly
allocated URB if the device has unexpected endpoint descriptors,
something which could lead NULL-pointer dereferences in a number of
open() and write() paths when accessing the URB. For example:
There are two parts which should be fixed. The first one is to assigned
uartps_major at the end of probe() to avoid complicated logic when
something fails.
The second part is initialized uartps_major number to 0 when last device is
removed. This will ensure that on next probe driver will ask for new
dynamic major number.
Fixes: ab262666018d ("serial: uartps: Use the same dynamic major number for all ports") Reported-by: Paul Thomas <pthomas8589@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/d2652cda992833315c4f96f06953eb547f928918.1570194248.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The driver was using its struct usb_interface pointer as an inverted
disconnected flag, but was setting it to NULL before making sure all
completion handlers had run. This could lead to a NULL-pointer
dereference in a number of dev_dbg, dev_warn and dev_err statements in
the completion handlers which relies on said pointer.
Fix this by unconditionally stopping all I/O and preventing
resubmissions by poisoning the interrupt URBs at disconnect and using a
dedicated disconnected flag.
This also makes sure that all I/O has completed by the time the
disconnect callback returns.
The driver was accessing its struct usb_interface in its release()
callback without holding a reference. This would lead to a
use-after-free whenever the device was disconnected while the character
device was still open.
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.
Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.
The driver was accessing its struct usb_interface from its release()
callback without holding a reference. This would lead to a
use-after-free whenever debugging was enabled and the device was
disconnected while its character device was open.
A recent fix addressing a deadlock on disconnect introduced a new bug
by moving the present flag out of the critical section protected by the
driver-data mutex. This could lead to a racing release() freeing the
driver data before disconnect() is done with it.
Due to insufficient locking a related use-after-free could be triggered
also before the above mentioned commit. Specifically, the driver needs
to hold the driver-data mutex also while checking the opened flag at
disconnect().
The driver was accessing its struct usb_device in its release()
callback without holding a reference. This would lead to a
use-after-free whenever the device was disconnected while the character
device was still open.
The driver was using its struct usb_device pointer as an inverted
disconnected flag, but was setting it to NULL before making sure all
completion handlers had run. This could lead to a NULL-pointer
dereference in a number of dev_dbg statements in the completion handlers
which relies on said pointer.
The pointer was also dereferenced unconditionally in a dev_dbg statement
release() something which would lead to a NULL-deref whenever a device
was disconnected before the final character-device close if debugging
was enabled.
Fix this by unconditionally stopping all I/O and preventing
resubmissions by poisoning the interrupt URBs at disconnect and using a
dedicated disconnected flag.
This also makes sure that all I/O has completed by the time the
disconnect callback returns.
The driver was clearing its struct usb_device pointer, which it used as
an inverted disconnected flag, before deregistering the character device
and without serialising against racing release().
This could lead to a use-after-free if a racing release() callback
observes the cleared pointer and frees the driver data before
disconnect() is finished with it.
This could also lead to NULL-pointer dereferences in a racing open().
udev stored in ep->hcpriv might be NULL if tt buffer is cleared
due to a halted control endpoint during device enumeration
xhci_clear_tt_buffer_complete is called by hub_tt_work() once it's
scheduled, and by then usb core might have freed and allocated a
new udev for the next enumeration attempt.
After commit f7fac17ca925 ("xhci: Convert xhci_handshake() to use
readl_poll_timeout_atomic()"), ASMedia xHCI may fail to suspend.
Although the algorithms are essentially the same, the old max timeout is
(usec + usec * time of doing readl()), and the new max timeout is just
usec, which is much less than the old one.
Increase the timeout to make ASMedia xHCI able to suspend again.
The system can hit a deadlock if an xhci adapter breaks while initializing.
The deadlock is between two threads: thread 1 is tearing down the
adapter and is stuck in usb_unlocked_disable_lpm waiting to lock the
hcd->handwidth_mutex. Thread 2 is holding this mutex (while still trying
to add a usb device), but is stuck in xhci_endpoint_reset waiting for a
stop or config command to complete. A reboot is required to resolve.
It turns out when calling xhci_queue_stop_endpoint and
xhci_queue_configure_endpoint in xhci_endpoint_reset, the return code is
not checked for errors. If the timing is right and the adapter dies just
before either of these commands get issued, we hang indefinitely waiting
for a completion on a command that didn't get issued.
This wasn't a problem before the following fix because we didn't send
commands in xhci_endpoint_reset:
commit f5249461b504 ("xhci: Clear the host side toggle manually when
endpoint is soft reset")
With the patch I am submitting, a duration test which breaks adapters
during initialization (and which deadlocks with the standard kernel) runs
without issue.
Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: <stable@vger.kernel.org> # v4.17+ Cc: Torez Smith <torez@redhat.com> Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com> Signed-off-by: Torez Smith <torez@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-7-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
NVIDIA 3.1 xHCI card would lose power when moving power state into D3Cold.
Thus we need to wait for CNR bit to clear in xhci resume, just as in
xhci init.
Early xHCI 1.1 spec did not mention USB 3.1 capable hosts should set
sbrn to 0x31, or that the minor revision is a two digit BCD
containing minor and sub-minor numbers.
This was later clarified in xHCI 1.2.
Some USB 3.1 capable hosts therefore have sbrn set to 0x30, or minor
revision set to 0x1 instead of 0x10.
Detect the USB 3.1 capability correctly for these hosts as well
If an endpoint is encountered that returns USB3_LPM_DEVICE_INITIATED, keep
checking further endpoints, as there might be periodic endpoints later
that return USB3_LPM_DISABLED due to shorter service intervals.
Without this, the code can set too high a maximum-exit-latency and
prevent the use of multiple USB3 cameras that should be able to work.
If host/hub initiated link pm is prevented by a driver flag we still must
ensure that periodic endpoints have longer service intervals than link pm
exit latency before allowing device initiated link pm.
Fix this by continue walking and checking endpoint service interval if
xhci_get_timeout_no_hub_lpm() returns anything else than USB3_LPM_DISABLED
The check printing out the "WARN Wrong bounce buffer write length:"
uses incorrect values when comparing bytes written from scatterlist
to bounce buffer. Actual copied lengths are fine.
The used seg->bounce_len will be set to equal new_buf_len a few lines later
in the code, but is incorrect when doing the comparison.
The patch which added this false warning was backported to 4.8+ kernels
so this should be backported as far as well.
The driver was using its struct usb_interface pointer as an inverted
disconnected flag and was setting it to NULL before making sure all
completion handlers had run. This could lead to NULL-pointer
dereferences in the dev_err() statements in the completion handlers
which relies on said pointer.
Fix this by using a dedicated disconnected flag.
Note that this is also addresses a NULL-pointer dereference at release()
and a struct usb_interface reference leak introduced by a recent runtime
PM fix, which depends on and should have been submitted together with
this patch.
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.
Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.
The driver was using its struct usb_interface pointer as an inverted
disconnected flag, but was setting it to NULL without making sure all
code paths that used it were done with it.
Before commit ef61eb43ada6 ("USB: yurex: Fix protection fault after
device removal") this included the interrupt-in completion handler, but
there are further accesses in dev_err and dev_dbg statements in
yurex_write() and the driver-data destructor (sic!).
Fix this by unconditionally stopping also the control URB at disconnect
and by using a dedicated disconnected flag.
Note that we need to take a reference to the struct usb_interface to
avoid a use-after-free in the destructor whenever the device was
disconnected while the character device was still open.
According to Greg KH, it has been generally agreed that when a USB
driver encounters an unknown error (or one it can't handle directly),
it should just give up instead of going into a potentially infinite
retry loop.
The three codes -EPROTO, -EILSEQ, and -ETIME fall into this category.
They can be caused by bus errors such as packet loss or corruption,
attempting to communicate with a disconnected device, or by malicious
firmware. Nowadays the extent of packet loss or corruption is
negligible, so it should be safe for a driver to give up whenever one
of these errors occurs.
Although the yurex driver handles -EILSEQ errors in this way, it
doesn't do the same for -EPROTO (as discovered by the syzbot fuzzer)
or other unrecognized errors. This patch adjusts the driver so that
it doesn't log an error message for -EPROTO or -ETIME, and it doesn't
retry after any errors.
The Rio500 kernel driver has not been used by Rio500 owners since 2001
not long after the rio500 project added support for a user-space USB stack
through the very first versions of usbdevfs and then libusb.
Support for the kernel driver was removed from the upstream utilities
in 2008:
https://gitlab.freedesktop.org/hadess/rio500/commit/943f624ab721eb8281c287650fcc9e2026f6f5db
Calling 'panic()' on a kernel with CONFIG_PREEMPT=y can leave the
calling CPU in an infinite loop, but with interrupts and preemption
enabled. From this state, userspace can continue to be scheduled,
despite the system being "dead" as far as the kernel is concerned.
This is easily reproducible on arm64 when booting with "nosmp" on the
command line; a couple of shell scripts print out a periodic "Ping"
message whilst another triggers a crash by writing to
/proc/sysrq-trigger:
Tyler Hicks [Fri, 18 Oct 2019 07:13:00 +0000 (09:13 +0200)]
UBUNTU: SAUCE: rtlwifi: Fix potential overflow on P2P code
Nicolas Waisman noticed that even though noa_len is checked for
a compatible length it's still possible to overrun the buffers
of p2pinfo since there's no check on the upper bound of noa_num.
Bounds check noa_num against P2P_MAX_NOA_NUM using the minimum of the
two.
CVE-2019-17666
Reported-by: Nicolas Waisman <nico@semmle.com> Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
[tyhicks: Reuse nearly all of a commit message written by Laura Abbott] Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
md raid0/linear: Mark array as 'broken' and fail BIOs if a member is gone
BugLink: https://bugs.launchpad.net/bugs/1847773
Currently md raid0/linear are not provided with any mechanism to validate
if an array member got removed or failed. The driver keeps sending BIOs
regardless of the state of array members, and kernel shows state 'clean'
in the 'array_state' sysfs attribute. This leads to the following
situation: if a raid0/linear array member is removed and the array is
mounted, some user writing to this array won't realize that errors are
happening unless they check dmesg or perform one fsync per written file.
Despite udev signaling the member device is gone, 'mdadm' cannot issue the
STOP_ARRAY ioctl successfully, given the array is mounted.
In other words, no -EIO is returned and writes (except direct ones) appear
normal. Meaning the user might think the wrote data is correctly stored in
the array, but instead garbage was written given that raid0 does stripping
(and so, it requires all its members to be working in order to not corrupt
data). For md/linear, writes to the available members will work fine, but
if the writes go to the missing member(s), it'll cause a file corruption
situation, whereas the portion of the writes to the missing devices aren't
written effectively.
This patch changes this behavior: we check if the block device's gendisk
is UP when submitting the BIO to the array member, and if it isn't, we flag
the md device as MD_BROKEN and fail subsequent I/Os to that device; a read
request to the array requiring data from a valid member is still completed.
While flagging the device as MD_BROKEN, we also show a rate-limited warning
in the kernel log.
A new array state 'broken' was added too: it mimics the state 'clean' in
every aspect, being useful only to distinguish if the array has some member
missing. We rely on the MD_BROKEN flag to put the array in the 'broken'
state. This state cannot be written in 'array_state' as it just shows
one or more members of the array are missing but acts like 'clean', it
wouldn't make sense to write it.
With this patch, the filesystem reacts much faster to the event of missing
array member: after some I/O errors, ext4 for instance aborts the journal
and prevents corruption. Without this change, we're able to keep writing
in the disk and after a machine reboot, e2fsck shows some severe fs errors
that demand fixing. This patch was tested in ext4 and xfs filesystems, and
requires a 'mdadm' counterpart to handle the 'broken' state.
Cc: Song Liu <songliubraving@fb.com> Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by: Song Liu <songliubraving@fb.com>
(backported from commit 62f7b1989c02feed9274131b2fd5e990de4aba6f)
[gpiccoli: minimal code adjustment in md.c - new kernels have an extra
check in the if() statement inside array_state_show().] Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
[ klebers: further context adjustments. ] Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
UBUNTU: [Packaging]: download virtualbox from sources
BugLink: https://bugs.launchpad.net/bugs/1848788
dkms packages are gone from the archive when new versions are uploaded.
dkms-build grab them from the existing sources on the builder, which will
work when the expected versions are present on any of the configured
sources.
virtualbox, however, right now, only grabs it from the main archive,
preventing builds when they have been superseded. Fix it by giving the
relative pool address instead of the absolute URL for the archive.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
UBUNTU: SAUCE: seccomp: test SECCOMP_USER_NOTIF_FLAG_CONTINUE
BugLink: https://bugs.launchpad.net/bugs/1847744
Test whether a syscall can be performed after having been intercepted by
the seccomp notifier. The test uses dup() and kcmp() since it allows us to
nicely test whether the dup() syscall actually succeeded by comparing whether
the fds refer to the same underlying struct file.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: Tycho Andersen <tycho@tycho.ws> CC: Tyler Hicks <tyhicks@canonical.com> Cc: stable@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: netdev@vger.kernel.org Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20190920083007.11475-4-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
(cherry picked from commit 0eebfed2954f152259cae0ad57b91d3ea92968e8
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git) Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1847744
This allows the seccomp notifier to continue a syscall. A positive
discussion about this feature was triggered by a post to the
ksummit-discuss mailing list (cf. [3]) and took place during KSummit
(cf. [1]) and again at the containers/checkpoint-restore
micro-conference at Linux Plumbers.
Recently we landed seccomp support for SECCOMP_RET_USER_NOTIF (cf. [4])
which enables a process (watchee) to retrieve an fd for its seccomp
filter. This fd can then be handed to another (usually more privileged)
process (watcher). The watcher will then be able to receive seccomp
messages about the syscalls having been performed by the watchee.
This feature is heavily used in some userspace workloads. For example,
it is currently used to intercept mknod() syscalls in user namespaces
aka in containers.
The mknod() syscall can be easily filtered based on dev_t. This allows
us to only intercept a very specific subset of mknod() syscalls.
Furthermore, mknod() is not possible in user namespaces toto coelo and
so intercepting and denying syscalls that are not in the whitelist on
accident is not a big deal. The watchee won't notice a difference.
In contrast to mknod(), a lot of other syscall we intercept (e.g.
setxattr()) cannot be easily filtered like mknod() because they have
pointer arguments. Additionally, some of them might actually succeed in
user namespaces (e.g. setxattr() for all "user.*" xattrs). Since we
currently cannot tell seccomp to continue from a user notifier we are
stuck with performing all of the syscalls in lieu of the container. This
is a huge security liability since it is extremely difficult to
correctly assume all of the necessary privileges of the calling task
such that the syscall can be successfully emulated without escaping
other additional security restrictions (think missing CAP_MKNOD for
mknod(), or MS_NODEV on a filesystem etc.). This can be solved by
telling seccomp to resume the syscall.
One thing that came up in the discussion was the problem that another
thread could change the memory after userspace has decided to let the
syscall continue which is a well known TOCTOU with seccomp which is
present in other ways already.
The discussion showed that this feature is already very useful for any
syscall without pointer arguments. For any accidentally intercepted
non-pointer syscall it is safe to continue.
For syscalls with pointer arguments there is a race but for any cautious
userspace and the main usec cases the race doesn't matter. The notifier
is intended to be used in a scenario where a more privileged watcher
supervises the syscalls of lesser privileged watchee to allow it to get
around kernel-enforced limitations by performing the syscall for it
whenever deemed save by the watcher. Hence, if a user tricks the watcher
into allowing a syscall they will either get a deny based on
kernel-enforced restrictions later or they will have changed the
arguments in such a way that they manage to perform a syscall with
arguments that they would've been allowed to do anyway.
In general, it is good to point out again, that the notifier fd was not
intended to allow userspace to implement a security policy but rather to
work around kernel security mechanisms in cases where the watcher knows
that a given action is safe to perform.
/* References */
[1]: https://linuxplumbersconf.org/event/4/contributions/560
[2]: https://linuxplumbersconf.org/event/4/contributions/477
[3]: https://lore.kernel.org/r/20190719093538.dhyopljyr5ns33qx@brauner.io
[4]: commit 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> CC: Tyler Hicks <tyhicks@canonical.com> Link: https://lore.kernel.org/r/20190920083007.11475-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
(cherry picked from commit fb3c5386b382d4097476ce9647260fc89b34afdb
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git) Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
UBUNTU: [Config] Change Config Option CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE for s390x from yes to no
BugLink: https://bugs.launchpad.net/bugs/1848492
Having CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE disabled makes sure that
memory that is configured as 'Reserved' to an s390x LPAR (on top of memory
that is configured as 'Initial') is no longer automatically consumed (means
set online) at boot time and can now be dynamically added later on demand.
Signed-off-by: Frank Heimes <frank.heimes@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Kleber Souza <kleber.souza@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
In the first iteration, we implemented a kmem cache for struct
shiftfs_file_info which stashed away a struct path and the struct file
for the underlay. The path however was never used anywhere so the struct
shiftfs_file_info and therefore the whole kmem cache can go away.
Instead we move to the same model as overlayfs and just stash away the
struct file for the underlay in file->private_data of the shiftfs struct
file.
Addtionally, we split the .open method for files and directories.
Similar to overlayfs .open for regular files uses open_with_fake_path()
which ensures that it doesn't contribute to the open file count (since
this would mean we'd count double). The .open method for directories
however used dentry_open() which contributes to the open file count.
The basic logic for opening files is unchanged. The main point is to
ensure that a reference to the underlay's dentry is kept through struct
path.
Various bits and pieces of this were cooked up in discussions Seth and I
had in Paris.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
blk-wbt: fix performance regression in wbt scale_up/scale_down
BugLink: https://bugs.launchpad.net/bugs/1847641
scale_up wakes up waiters after scaling up. But after scaling max, it
should not wake up more waiters as waiters will not have anything to
do. This patch fixes this by making scale_up (and also scale_down)
return when threshold is reached.
This bug causes increased fdatasync latency when fdatasync and dd
conv=sync are performed in parallel on 4.19 compared to 4.14. This
bug was introduced during refactoring of blk-wbt code.
Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Cc: stable@vger.kernel.org Cc: Josef Bacik <jbacik@fb.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit b84477d3ebb96294f87dc3161e53fa8fe22d9bfd ) Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Acked-by: Connor Kuehl <connor.kuehl@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
projects / mirror_ubuntu-eoan-kernel.git / log