Paul Mundt [Wed, 20 Jan 2010 09:25:19 +0000 (18:25 +0900)]
sh: mach-sdk7786: Probe system FPGA area mapping.
This implements dynamic probing for the system FPGA. The system reset
controller contains a fixed magic read word in order to identify the
FPGA. This just utilizes a simple loop that scans across all of the fixed
physical areas (area 0 through area 6) to locate the FPGA.
The FPGA also contains register information detailing the area mappings
and chip select settings for all of the other blocks, so this needs to be
done before we can set up anything else.
Paul Mundt [Wed, 20 Jan 2010 09:10:30 +0000 (18:10 +0900)]
sh: Correct iounmap fixmap teardown.
iounmap_fixed() had a couple of bugs in it that caused it to effectively
fail at life. The total number of pages to unmap factored in the mapping
offset and aligned up to the next page boundary, which doesn't match the
ioremap_fixed() behaviour.
When ioremap_fixed() pegs a slot, the address in the mapping data already
contains the offset displacement, and the size is recorded verbatim given
that we're only interested in total number of pages required. As such, we
need to calculate the total number from the original size in the unmap
path as well.
At the same time, there was also an off-by-1 problem in the fixmap index
calculation which has also been corrected.
Previously subsequent remaps of an identical fixmap index would trigger
the pte_ERROR() in set_pte_phys():
Paul Mundt [Wed, 20 Jan 2010 07:40:48 +0000 (16:40 +0900)]
sh: Make 29/32-bit mode check helper generally available.
Presently __in_29bit_mode() is only defined for the PMB case, but
it's also easily derived from the CONFIG_29BIT and CONFIG_32BIT &&
CONFIG_PMB=n cases.
Paul Mundt [Wed, 20 Jan 2010 06:23:54 +0000 (15:23 +0900)]
sh: mach-sdk7786: Split out FPGA IRQ controller setup.
This moves out the FPGA IRQ controller setup code to its own file, in
preparation for switching off of IRL mode and having it provide its own
irq_chip.
Paul Mundt [Wed, 20 Jan 2010 06:08:36 +0000 (15:08 +0900)]
sh: mach-sdk7786: FPGA updates.
This does a bit of refactoring of the FPGA management code. The primary
FPGA initialization is moved out to its own file in preparation for
implementing some of the more complex capabilities, a complete set of
register definitions is provided, and all of the existing users in the
board code are moved over to use the new interface instead of setting up
overlapping mappings. This also corrects the FPGA size, which previously
was chomped off at the SDIF control register.
Paul Mundt [Tue, 19 Jan 2010 18:38:56 +0000 (03:38 +0900)]
sh: Handle SH-4 FPU variants with broken CVR values.
Usually we can look to the CVR to work out whether we have an FPU or not.
Unfortunately not all parts comply with this, so just set the flag
manually for all SH-4 parts and clear it on the only SH-4 that doesn't
have one (SH4-501).
Magnus Damm [Tue, 19 Jan 2010 13:52:28 +0000 (13:52 +0000)]
sh: update PFC to allow any enum in MARK lists
This patch updates the PFC code with some clarifying
comments together with a functional change. The change
allows function type of GPIO to select any type of enum
in their MARK lists. Without this patch only function
type of enums are allowed in MARK lists.
Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
sh: support SIU sourcing from external clock on sh7722
Implement .set_rate() for all SH "div4 clocks," .enable(), .disable(), and
.set_parent() for those, that support them. This allows, among other uses,
reparenting of SIU clocks to the external source, and enabling and
disabling of the IrDA clock on sh7722.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This uses the mode pins exposed through the FPGA to work out whether
we're driven from EXTAL or not and does the appropriate setup and
propagation through the clock framework.
This will also -EINVAL out for anyone adding in their own oscillators,
forcing proper configuration with the clock framework instead of
proceeding on with bogus clock values.
Paul Mundt [Tue, 19 Jan 2010 10:37:14 +0000 (19:37 +0900)]
sh: SH7786 clock framework rewrite.
This rewrites the SH7786 clock framework support completely. It's
reworked to provide all of the DIV4 and MSTP function clocks. This brings
it in line with the current clock framework code and lets us drop SH7786
from the list of CPUs that require legacy CPG handling.
Paul Mundt [Tue, 19 Jan 2010 06:41:50 +0000 (15:41 +0900)]
sh64: Fix up PC casting in unaligned fixup notifier with 32bit ABI.
Presently the build bails with the following:
CC arch/sh/mm/alignment.o
cc1: warnings being treated as errors
arch/sh/mm/alignment.c: In function 'unaligned_fixups_notify':
arch/sh/mm/alignment.c:69: warning: cast to pointer from integer of different size
arch/sh/mm/alignment.c:74: warning: cast to pointer from integer of different size
make[2]: *** [arch/sh/mm/alignment.o] Error 1
This is due to the fact that regs->pc is always 64-bit, while the pointer size
depends on the ABI. Wrapping through instruction_pointer() takes care of the
appropriate casting for both configurations.
Paul Mundt [Tue, 19 Jan 2010 06:22:52 +0000 (15:22 +0900)]
sh: Kill off now bogus fixmap/page wiring documentation.
The plans for _PAGE_WIRED were detailed in a comment with the fixmap
code, but as it's now all taken care of, we no longer have any reason for
keeping it around, particularly since it's no longer accurate. Kill it
off.
Paul Mundt [Tue, 19 Jan 2010 06:20:35 +0000 (15:20 +0900)]
sh: Split out MMUCR.URB based entry wiring in to shared helper.
Presently this is duplicated between tlb-sh4 and tlb-pteaex. Split the
helpers out in to a generic tlb-urb that can be used by any parts
equipped with MMUCR.URB.
At the same time, move the SH-5 code out-of-line, as we require single
global state for DTLB entry wiring.
Paul Mundt [Tue, 19 Jan 2010 05:23:39 +0000 (14:23 +0900)]
sh: Provide a dummy _PAGE_WIRED flag for non-X2TLB parts.
This provides a dummy value for legacy parts which permits the entry
wiring to be open-coded. The compiler takes care of optimizing the entry
wiring away in these cases.
Paul Mundt [Tue, 19 Jan 2010 05:00:14 +0000 (14:00 +0900)]
sh: Limit ioremap_prot() to 32bit pgprot parts.
Presently ioremap_prot() uses an unsigned long to pass the pgprot value
around. This results in the upper half of the pgprot being chomped when
using 64-bit pgprots on a 32-bit ABI (X2TLB and SH-5).
As the only users of ioremap_prot() are presently legacy parts, this
doesn't cause too much of an issue. In the future when the interface is
converted to use pgprot_t directly this can be re-enabled for the other
parts, too.
Paul Mundt [Tue, 19 Jan 2010 04:49:19 +0000 (13:49 +0900)]
sh: Kill off duplicate address alignment in ioremap_fixed().
This is already taken care of in the top-level ioremap, and now that
no one should be calling ioremap_fixed() directly we can simply throw the
mapping displacement in as an additional argument.
Paul Mundt [Tue, 19 Jan 2010 04:34:38 +0000 (13:34 +0900)]
sh: Prevent 64-bit pgprot clobbering across ioremap implementations.
Presently 'flags' gets passed around a lot between the various ioremap
helpers and implementations, which is only 32-bits. In the X2TLB case
we use 64-bit pgprots which presently results in the upper 32bits being
chopped off (which handily include our read/write/exec permissions).
As such, we convert everything internally to using pgprot_t directly and
simply convert over with pgprot_val() where needed. With this in place,
transparent fixmap utilization for early ioremap works as expected.
Paul Mundt [Mon, 18 Jan 2010 12:45:00 +0000 (21:45 +0900)]
sh: Flag __ioremap_caller() __init_refok.
The mem_init_done test makes sure that this path is only entered in
__init cases, so leaving ioremap_fixed() as __init and flagging the
caller __init_refok is sufficient.
Paul Mundt [Mon, 18 Jan 2010 12:33:08 +0000 (21:33 +0900)]
sh: Handle unmapping of fixed slots transparently in iounmap().
iounmap() should balance whatever is done by ioremap(). Presently
ioremap() can do any of fixed mappings, PMB mappings, or page table
mappings. Presently only the latter two are handled through the standard
unmap path, so tie in the fixed unmapping, too.
Paul Mundt [Mon, 18 Jan 2010 12:30:29 +0000 (21:30 +0900)]
sh: Make iounmap_fixed() return success/failure for iounmap() path.
This converts iounmap_fixed() to return success/error if it handled the
unmap request or not. At the same time, drop the __init label, as this
can be called in to later.
Paul Mundt [Mon, 18 Jan 2010 12:20:13 +0000 (21:20 +0900)]
sh: Fixup the IOREMAP_FIXED=n build.
Presently the fixed ioremap API is only defined when CONFIG_IOREMAP_FIXED
is set. As we want to call in to it unconditionally, provide a stubbed
out interface.
Paul Mundt [Mon, 18 Jan 2010 11:39:49 +0000 (20:39 +0900)]
sh: Need IRQs enabled for init_fpu().
This tosses in a local_irq_enable()/disable() pair around the init_fpu()
callsite in the FPU state restore exception handler. Fixes up a slab BUG
triggered by making a slab cache allocation that can sleep whilst
irqs_disabled(). This follows the behaviour undertaken by the x86
implementation.
Matt Fleming [Mon, 18 Jan 2010 10:33:10 +0000 (19:33 +0900)]
sh: Setup early PMB mappings.
More and more boards are going to start shipping that boot with the MMU
in 32BIT mode by default. Previously we relied on the bootloader to
setup PMB mappings for use by the kernel but we also need to cater for
boards whose bootloaders don't set them up.
If CONFIG_PMB_LEGACY is not enabled we have full control over our PMB
mappings and can compress our address space. Usually, the distance
between the the cached and uncached mappings of RAM is always 512MB,
however we can compress the distance to be the amount of RAM on the
board.
pmb_init() now becomes much simpler. It no longer has to calculate any
mappings, it just has to synchronise the software PMB table with the
hardware.
Tested on SDK7786 and SH7785LCR.
Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Linus Torvalds [Sun, 17 Jan 2010 19:01:16 +0000 (11:01 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
do_add_mount() should sanitize mnt_flags
CIFS shouldn't make mountpoints shrinkable
mnt_flags fixes in do_remount()
attach_recursive_mnt() needs to hold vfsmount_lock over set_mnt_shared()
may_umount() needs namespace_sem
Fix configfs leak
Fix the -ESTALE handling in do_filp_open()
ecryptfs: Fix refcnt leak on ecryptfs_follow_link() error path
Fix ACC_MODE() for real
Unrot uml mconsole a bit
hppfs: handle ->put_link()
Kill 9p readlink()
fix autofs/afs/etc. magic mountpoint breakage
Mike Frysinger [Sat, 16 Jan 2010 21:57:34 +0000 (08:27 +1030)]
modpost: fix segfault in sym_is() with prefixed arches
The sym_is() compares a symbol in an attempt to automatically skip symbol
prefixes. It does this first by searching the real symbol with the normal
unprefixed symbol. But then it uses the length of the original symbol to
check the end of the substring instead of the length of the symbol it is
looking for. On non-prefixed arches, this is effectively the same thing,
so there is no problem. On prefixed-arches, since this is exceeds by just
one byte, a crash is rare and it is usually a NUL byte anyways. But every
once in a blue moon, you get the right page alignment and it segfaults.
For example, on the Blackfin arch, sym_is() will be called with the real
symbol "___mod_usb_device_table" as "symbol" when looking for the normal
symbol "__mod_usb_device_table" as "name". The substring will thus return
one byte into "symbol" and store it into "match". But then "match" will
be indexed with the length of "symbol" instead of "name" and so we will
exceed the storage. i.e. the code ends up doing:
char foo[] = "abc"; return foo[strlen(foo)+1] == '\0';
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KOSAKI Motohiro [Sat, 16 Jan 2010 01:01:18 +0000 (17:01 -0800)]
page allocator: update NR_FREE_PAGES only when necessary
commit f2260e6b (page allocator: update NR_FREE_PAGES only as necessary)
made one minor regression. if __rmqueue() was failed, NR_FREE_PAGES stat
go wrong. this patch fixes it.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Huang Shijie <shijie8@gmail.com> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 16 Jan 2010 20:34:56 +0000 (12:34 -0800)]
Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c: Do not use device name after device_unregister
i2c/pca: Don't use *_interruptible
i2c-ali1563: Remove sparse warnings
i2c: Test off by one in {piix4,vt596}_transaction()
i2c-core: Storage class should be before const qualifier
Linus Torvalds [Sat, 16 Jan 2010 20:31:42 +0000 (12:31 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, uv: Ensure hub revision set for all ACPI modes.
x86, uv: Add function retrieving node controller revision number
x86: xen: 64-bit kernel RPL should be 0
x86: kernel_thread() -- initialize SS to a known state
x86/agp: Fix agp_amd64_init and agp_amd64_cleanup
x86: SGI UV: Fix mapping of MMIO registers
x86: mce.h: Fix warning in header checks
Linus Torvalds [Sat, 16 Jan 2010 20:27:47 +0000 (12:27 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tools: Check if /dev/null can be used as the -o gcc argument
perf tools: Move QUIET_STDERR def to before first use
perf: Stop stack frame walking off kernel addresses boundaries
Linus Torvalds [Sat, 16 Jan 2010 20:27:25 +0000 (12:27 -0800)]
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing/filters: Add comment for match callbacks
tracing/filters: Fix MATCH_FULL filter matching for PTR_STRING
tracing/filters: Fix MATCH_MIDDLE_ONLY filter matching
lib: Introduce strnstr()
tracing/filters: Fix MATCH_END_ONLY filter matching
tracing/filters: Fix MATCH_FRONT_ONLY filter matching
ftrace: Fix MATCH_END_ONLY function filter
tracing/x86: Derive arch from bits argument in recordmcount.pl
ring-buffer: Add rb_list_head() wrapper around new reader page next field
ring-buffer: Wrap a list.next reference with rb_list_head()
Mark Brown [Sat, 16 Jan 2010 01:01:40 +0000 (17:01 -0800)]
revert "drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer"
Fix divide by zero and broken output. Commit 600ce1a0fa ("fix clock
setting for Samsung SoC Framebuffer") introduced a mandatory refresh
parameter to the platform data for the S3C framebuffer but did not
introduce any validation code, causing existing platforms (none of which
have refresh set) to divide by zero whenever the framebuffer is
configured, generating warnings and unusable output.
Ben Dooks noted several problems with the patch:
- The platform data supplies the pixclk directly and should already
have taken care of the refresh rate.
- The addition of a window ID parameter doesn't help since only the
root framebuffer can control the pixclk.
- pixclk is specified in picoseconds (rather than Hz) as the patch
assumed.
and suggests reverting the commit so do that. Without fixing this no
mainline user of the driver will produce output.
[akpm@linux-foundation.org: don't revert the correct bit] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Sat, 16 Jan 2010 01:01:39 +0000 (17:01 -0800)]
nommu: fix shared mmap after truncate shrinkage problems
Fix a problem in NOMMU mmap with ramfs whereby a shared mmap can happen
over the end of a truncation. The problem is that
ramfs_nommu_check_mappings() checks that the reduced file size against the
VMA tree, but not the vm_region tree.
The following sequence of events can cause the problem:
Mapping 'a' creates a vm_region covering 32KB of the file. Mapping 'b'
sees that the vm_region from 'a' is covering the region it wants and so
shares it, pinning it in memory.
Mapping 'a' then goes away and the file is truncated to the end of VMA
'b'. However, the region allocated by 'a' is still in effect, and has
_not_ been reduced.
Mapping 'c' is then created, and because there's a vm_region covering the
desired region, get_unmapped_area() is _not_ called to repeat the check,
and the mapping is granted, even though the pages from the latter half of
the mapping have been discarded.
However:
d = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
Mapping 'd' should work, and should end up sharing the region allocated by
'a'.
To deal with this, we shrink the vm_region struct during the truncation,
lest do_mmap_pgoff() take it as licence to share the full region
automatically without calling the get_unmapped_area() file op again.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Sat, 16 Jan 2010 01:01:36 +0000 (17:01 -0800)]
nommu: fix race between ramfs truncation and shared mmap
Fix the race between the truncation of a ramfs file and an attempt to make
a shared mmap of region of that file.
The problem is that do_mmap_pgoff() calls f_op->get_unmapped_area() to
verify that the file region is made of contiguous pages and to find its
base address - but there isn't any locking to guarantee this region until
vma_prio_tree_insert() is called by add_vma_to_mm().
Note that moving the functionality into f_op->mmap() doesn't help as that
is also called before vma_prio_tree_insert().
Instead make ramfs_nommu_check_mappings() grab nommu_region_sem whilst it
does its checks. This means that this function will wait whilst mmaps
take place.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Sat, 16 Jan 2010 01:01:32 +0000 (17:01 -0800)]
nommu: fix SYSV SHM for NOMMU
Commit c4caa778157dbbf04116f0ac2111e389b5cd7a29 ("file
->get_unmapped_area() shouldn't duplicate work of get_unmapped_area()")
broke SYSV SHM for NOMMU by taking away the pointer to
shm_get_unmapped_area() from shm_file_operations.
Put it back conditionally on CONFIG_MMU=n.
file->f_ops->get_unmapped_area() is used to find out the base address for a
mapping of a mappable chardev device or mappable memory-based file (such as a
ramfs file). It needs to be called prior to file->f_ops->mmap() being called.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Due to prototype mismatch, print_block_size() will sprintf() into
*attribute instead of *buf, hence user space will read the initial
zeros from *buf:
$ hexdump /sys/devices/system/memory/block_size_bytes 0000000 0000 0000 0000 0000 0000008
After patch:
cat /sys/devices/system/memory/block_size_bytes
0x8000000
Current mem_cgroup_force_empty() only ensures mem->res.usage == 0 on
success. But this doesn't guarantee memcg's LRU is really empty, because
there are some cases in which !PageCgrupUsed pages exist on memcg's LRU.
For example:
- Pages can be uncharged by its owner process while they are on LRU.
- race between mem_cgroup_add_lru_list() and __mem_cgroup_uncharge_common().
So there can be a case in which the usage is zero but some of the LRUs are not empty.
OTOH, mem_cgroup_del_lru_list(), which can be called asynchronously with
rmdir, accesses the mem_cgroup, so this access can cause a problem if it
races with rmdir because the mem_cgroup might have been freed by rmdir.
Actually, I saw a bug which seems to be caused by this race.
The problem here is pages on LRU may contain pointer to stale memcg. To
make res->usage to be 0, all pages on memcg must be uncharged or moved to
another(parent) memcg. Moved page_cgroup have already removed from
original LRU, but uncharged page_cgroup contains pointer to memcg withou
PCG_USED bit. (This asynchronous LRU work is for improving performance.)
If PCG_USED bit is not set, page_cgroup will never be added to memcg's
LRU. So, about pages not on LRU, they never access stale pointer. Then,
what we have to take care of is page_cgroup _on_ LRU list. This patch
fixes this problem by making mem_cgroup_force_empty() visit all LRUs
before exiting its loop and guarantee there are no pages on its LRU.
Jeff Mahoney [Sat, 16 Jan 2010 01:01:26 +0000 (17:01 -0800)]
virtio: fix section mismatch warnings
Fix fixes the following warnings by renaming the driver structures to be
suffixed with _driver.
WARNING: drivers/virtio/virtio_balloon.o(.data+0x88): Section mismatch in reference from the variable virtio_balloon to the function .devexit.text:virtballoon_remove()
WARNING: drivers/char/hw_random/virtio-rng.o(.data+0x88): Section mismatch in reference from the variable virtio_rng to the function .devexit.text:virtrng_remove()
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KOSAKI Motohiro [Sat, 16 Jan 2010 01:01:25 +0000 (17:01 -0800)]
vmscan: kswapd: don't retry balance_pgdat() if all zones are unreclaimable
Commit f50de2d3 (vmscan: have kswapd sleep for a short interval and double
check it should be asleep) can cause kswapd to enter an infinite loop if
running on a single-CPU system. If all zones are unreclaimble,
sleeping_prematurely return 1 and kswapd will call balance_pgdat() again.
but it's totally meaningless, balance_pgdat() doesn't anything against
unreclaimable zone!
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Reported-by: Will Newton <will.newton@gmail.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Tested-by: Will Newton <will.newton@gmail.com> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David John [Sat, 16 Jan 2010 01:01:23 +0000 (17:01 -0800)]
smp_call_function_any(): pass the node value to cpumask_of_node()
The change in acpi_cpufreq to use smp_call_function_any causes a warning
when it is called since the function erroneously passes the cpu id to
cpumask_of_node rather than the node that the cpu is on. Fix this.
Roland Dreier [Sat, 16 Jan 2010 01:01:22 +0000 (17:01 -0800)]
kernel.h: add BUILD_BUG_ON_NOT_POWER_OF_2()
Add BUILD_BUG_ON_NOT_POWER_OF_2()
When code relies on a constant being a power of 2:
#define FOO 512 /* must be a power of 2 */
it would be nice to be able to do:
BUILD_BUG_ON(!is_power_of_2(FOO));
However applying an inline function does not result in a compile-time
constant that can be used with BUILD_BUG_ON(), so trying that gives
results in:
error: bit-field '<anonymous>' width not an integer constant
As suggested by akpm, rather than monkeying around with is_power_of_2()
and risking gcc warts about constant expressions, just create a macro
BUILD_BUG_ON_NOT_POWER_OF_2() to encapsulate this common requirement.
Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: David Dillow <dave@thedillows.org> Cc: "Robert P. J. Day" <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/page_alloc: fix the range check for backward merging
The current check for 'backward merging' within add_active_range() does
not seem correct. start_pfn must be compared against
early_node_map[i].start_pfn (and NOT against .end_pfn) to find out whether
the new region is backward-mergeable with the existing range.
Signed-off-by: Kazuhisa Ichikawa <ki@epsilou.com> Acked-by: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Sat, 16 Jan 2010 01:01:17 +0000 (17:01 -0800)]
kfifo: document everywhere that size has to be power of two
On my first try using them I missed that the fifos need to be power of
two, resulting in a runtime bug. Document that requirement everywhere
(and fix one grammar bug)
Andi Kleen [Sat, 16 Jan 2010 01:01:15 +0000 (17:01 -0800)]
kfifo: sanitize *_user error handling
Right now for kfifo_*_user it's not easily possible to distingush between
a user copy failing and the FIFO not containing enough data. The problem
is that both conditions are multiplexed into the same return code.
Avoid this by moving the "copy length" into a separate output parameter
and only return 0/-EFAULT in the main return value.
I didn't fully adapt the weird "record" variants, those seem
to be unused anyways and were rather messy (should they be just removed?)
I would appreciate some double checking if I did all the conversions
correctly.
Andi Kleen [Sat, 16 Jan 2010 01:01:12 +0000 (17:01 -0800)]
kfifo: use void * pointers for user buffers
The pointers to user buffers are currently unsigned char *, which requires
a lot of casting in the caller for any non-char typed buffers. Use void *
instead.
Randy Dunlap [Sat, 16 Jan 2010 01:01:11 +0000 (17:01 -0800)]
tty.h: make tty_port_get() static inline
I get a few dozen of these warnings when using
gcc (GCC) 4.4.1 20090725 (Red Hat 4.4.1-2):
In file included from mmotm-2010-0113-1217/init/do_mounts.c:5:
mmotm-2010-0113-1217/include/linux/tty.h: In function 'tty_port_get':
mmotm-2010-0113-1217/include/linux/tty.h:469: warning: '______f' is static but declared in inline function 'tty_port_get' which is not static
so make the function static inline.
[akpm@linux-foundation.org: may as well convert tty_port_users() also] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tamas Vincze [Sat, 16 Jan 2010 01:01:10 +0000 (17:01 -0800)]
edac: i5000_edac critical fix panic out of bounds
EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4)
Kernel panic - not syncing: EDAC MC0: Uncorrected Error (XEN) Domain 0 crashed: 'noreboot' set - not rebooting.
This happens because FERR_NF_FBD bit 28 is not updated on i5000. Due to
that, both bits 28 and 29 may be equal to one, returning channel = 3. As
this value is invalid, EDAC core generates the panic.
john stultz [Sat, 16 Jan 2010 01:01:09 +0000 (17:01 -0800)]
m68knommu: fix invalid flags on coldfire pit clocksource
The m68knommu coldfire pit clocksource looks like it was incorrectly
marked as a continuous clocksource. Running with it marked as a
continuous clocksource could cause hangs when the system switches to
highres mode or enables nohz.
This patch removes the CLOCK_SOURCE_IS_CONTINUOUS flag on the coldfire pit
clocksource. This will disallow systems using this clocksource from
entering oneshot mode (disabling highres timers and nohz).
Signed-off-by: John Stultz <johnstul@us.ibm.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Cc: Steven King <sfking@fdwdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hui Zhu [Sat, 16 Jan 2010 01:01:07 +0000 (17:01 -0800)]
markup_oops.pl: fix error with x86
When I try to use markup_oops.pl in x86, I always get:
cat 1 | perl markup_oops.pl ./vmlinux
objdump: --start-address: bad number: NaN
No matching code found
This is because in line:
if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/[a-f0-9]/) {
$function = $1;
$func_offset = $2;
}
$func_offset will get a number like "0x2"
But in follow code:
my $decodestart = Math::BigInt->from_hex("0x$target") -
Math::BigInt->from_hex("0x$func_offset");
It add other ox to ox2. Then this value will be set to NaN.
So I made a small patch to fix it.
Signed-off-by: Hui Zhu <teawater@gmail.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Erik-Jan Post [Sat, 16 Jan 2010 01:01:06 +0000 (17:01 -0800)]
viafb: fix acceleration for some chips
Fix a regression in hardware acceleration which made the accelerated
framebuffer unusable on some chips. These need extra initialization and
an extra flag which is no longer needed/available on current chips.
Signed-off-by: Erik-Jan Post <ej.lfs@xs4all.nl> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although I'd consider this a hardware bug, as there is hardware out that
for whatever reason does not support hardware cursors on LCD output we
have to care about it in the driver. This fixes a regression (invisible
cursor) introduced by:
viafb: cleanup viafb_cursor
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Reported-by: Julian Wollrath <jwollrath@web.de> Tested-by: Julian Wollrath <jwollrath@web.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Márton Németh [Sat, 16 Jan 2010 19:43:13 +0000 (20:43 +0100)]
i2c-ali1563: Remove sparse warnings
Remove the following sparse warnings (see "make C=1"):
* drivers/i2c/busses/i2c-ali1563.c:91:3: warning: do-while statement
is not a compound statement
* drivers/i2c/busses/i2c-ali1563.c:161:3: warning: do-while statement
is not a compound statement
Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Linus Torvalds [Sat, 16 Jan 2010 18:44:38 +0000 (10:44 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
drm/i915: enable 36bit physical address for hardware status page
drm/i915: fix eDP pipe mask
drm/i915: fix pixel color depth setting on eDP
drm/i915: parse eDP panel color depth from VBT block
drm/i915: disable LVDS downclock by default
drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register
drm/i915: Remove chatty execbuf failure message.
drm/i915: remove loop in Ironlake interrupt handler
drm/i915: Don't wait interruptible for possible plane buffer flush
drm/i915: try another possible DDC bus for the SDVO device with multiple outputs
drm/i915: Read the response after issuing DDC bus switch command
drm/i915: Don't use the child device parsed from VBT to setup HDMI/DP
drm/i915: Fix resume regression on MSI Wind U100 w/o KMS
drm/i915: Fix Ironlake M/N/P ranges to match the spec
drm/i915: Use find_pll function to calculate DPLL setting for LVDS downclock
drm/i915: Add HP nx9020/SamsungSX20S to ACPI LID quirk list
drm/i915: disable TV hotplug status check
Trivial conflicts in drivers/gpu/drm/i915/i915_drv.c due to i915
non-modeset suspend fix with different comment.
Al Viro [Sat, 16 Jan 2010 18:07:36 +0000 (13:07 -0500)]
do_add_mount() should sanitize mnt_flags
MNT_WRITE_HOLD shouldn't leak into new vfsmount and neither
should MNT_SHARED (the latter will be set properly, along with
the rest of shared-subtree data structures)
Matt Fleming [Thu, 5 Nov 2009 08:01:10 +0000 (08:01 +0000)]
sh: Use ioremap_fixmed to map the SM501 DRAM config register
We need to write to the DRAM config register very early and at such an
early stage ioremap() is not available. So use ioremap_fixed() to map
the register.
The reason that we are avoiding using the legacy P2 mapping is that
there will come a day when the legacy P2 mappings no longer exist.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Matt Fleming [Thu, 5 Nov 2009 07:54:17 +0000 (07:54 +0000)]
sh: Add fixed ioremap support
Some devices need to be ioremap'd and accessed very early in the boot
process. It is not possible to use the standard ioremap() function in
this case because that requires kmalloc()'ing some virtual address space
and kmalloc() may not be available so early in boot.
This patch provides fixmap mappings that allow physical address ranges
to be remapped into the kernel address space during the early boot
stages.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Matt Fleming [Thu, 19 Nov 2009 21:11:05 +0000 (21:11 +0000)]
sh: Acquire some more page flags for SH-5.
We need some more page flags to hook up _PAGE_WIRED (and eventually
other things). So use the unused PTE bits above the PPN field as no
implementations use these for anything currently.
Now that we have _PAGE_WIRED let's provide the SH-5 functions for wiring
up TLB entries.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Matt Fleming [Tue, 17 Nov 2009 21:05:31 +0000 (21:05 +0000)]
sh: New extended page flag to wire/unwire TLB entries
Provide a new extended page flag, _PAGE_WIRED and an SH4 implementation
for wiring TLB entries and use it in the fixmap code path so that we can
wire the fixmap TLB entry.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Linus Torvalds [Fri, 15 Jan 2010 22:53:24 +0000 (14:53 -0800)]
Merge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux
* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux:
ARM: MINI2440: Fixup __initdata usage
ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier
ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator
ARM: S3C: NAND: Check the existence of nr_map before copying
Linus Torvalds [Fri, 15 Jan 2010 22:51:57 +0000 (14:51 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: sentelic - fix left/right horizontal scroll mapping
Input: pmouse - move Sentelic probe down the list
Input: add compat support for sysfs and /proc capabilities output
Input: i8042 - add Dritek quirk for Acer Aspire 5610.
Input: xbox - do not use GFP_KERNEL under spinlock
Input: psmouse - fix Synaptics detection when protocol is disabled
Input: bcm5974 - report ABS_MT events
Input: davinci_keyscan - add device_enable method to platform data
Input: evdev - be less aggressive about sending SIGIO notifies
Input: atkbd - fix canceling event_work in disconnect
Input: serio - fix potential deadlock when unbinding drivers
Input: gf2k - fix &&/|| confusion in gf2k_connect()
Linus Torvalds [Fri, 15 Jan 2010 22:51:39 +0000 (14:51 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
alpha: cpumask_of_node() should handle -1 as a node
alpha: add myself as a maintainer, and drop mention of 2.4
Eric Paris [Fri, 15 Jan 2010 17:12:25 +0000 (12:12 -0500)]
inotify: only warn once for inotify problems
inotify will WARN() if it finds that the idr and the fsnotify internals
somehow got out of sync. It was only supposed to do this once but due
to this stupid bug it would warn every single time a problem was
detected.
Signed-off-by: Eric Paris <eparis@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Fri, 15 Jan 2010 17:12:24 +0000 (12:12 -0500)]
inotify: do not reuse watch descriptors
Since commit 7e790dd5fc937bc8d2400c30a05e32a9e9eef276 ("inotify: fix
error paths in inotify_update_watch") inotify changed the manor in which
it gave watch descriptors back to userspace. Previous to this commit
inotify acted like the following:
inotify_add_watch(X, Y, Z) = 1
inotify_rm_watch(X, 1);
inotify_add_watch(X, Y, Z) = 2
but after this patch inotify would return watch descriptors like so:
inotify_add_watch(X, Y, Z) = 1
inotify_rm_watch(X, 1);
inotify_add_watch(X, Y, Z) = 1
which I saw as equivalent to opening an fd where
open(file) = 1;
close(1);
open(file) = 1;
seemed perfectly reasonable. The issue is that quite a bit of userspace
apparently relies on the behavior in which watch descriptors will not be
quickly reused. KDE relies on it, I know some selinux packages rely on
it, and I have heard complaints from other random sources such as debian
bug 558981.
Although the man page implies what we do is ok, we broke userspace so
this patch almost reverts us to the old behavior. It is still slightly
racey and I have patches that would fix that, but they are rather large
and this will fix it for all real world cases. The race is as follows:
- task1 creates a watch and blocks in idr_new_watch() before it updates
the hint.
- task2 creates a watch and updates the hint.
- task1 updates the hint with it's older wd
- task removes the watch created by task2
- task adds a new watch and will reuse the wd originally given to task2
it requires moving some locking around the hint (last_wd) but this should
solve it for the real world and be -stable safe.
As a side effect this patch papers over a bug in the lib/idr code which
is causing a large number WARN's to pop on people's system and many
reports in kerneloops.org. I'm working on the root cause of that idr
bug seperately but this should make inotify immune to that issue.
Signed-off-by: Eric Paris <eparis@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / mirror_ubuntu-jammy-kernel.git / log