Ville Syrjälä [Fri, 28 Sep 2018 18:04:01 +0000 (21:04 +0300)]
drm/dp: Implement I2C_M_STOP for i2c-over-aux
Consult the I2C_M_STOP flag to determine whether to set the MOT bit or
not. Makes it possible to send multiple messages in one go with
stop+start generated between the messages (as opposed nothing or
repstart depending on whether thr address/rw changed).
Not sure anyone has actual use for this but figured I'd handle it
since I started to look at that flag for MST remote i2c xfers.
drm/stm: ltdc: remove set but not used variable 'src_h'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/stm/ltdc.c: In function 'ltdc_plane_atomic_check':
drivers/gpu/drm/stm/ltdc.c:694:13: warning:
variable 'src_y' set but not used [-Wunused-but-set-variable]
u32 src_x, src_y, src_w, src_h;
^
^
drivers/gpu/drm/stm/ltdc.c:694:6: warning:
variable 'src_x' set but not used [-Wunused-but-set-variable]
u32 src_x, src_y, src_w, src_h;
^
This adds the appropriate device-tree compatible for hooking frontend
support for the A20. Since the hardware is very similar to the A10, it
shares the same quirks (which were already introduced).
drm/sun4i: frontend: Hook-in support for the A10, with specific quirks
This adds the appropriate device-tree compatible and quirk data for
hooking frontend support for the A20. It supports the FIR coefficients
ready bit but not the access control bit. It also takes different phase
values than the A33 for these coefficients.
The compatible is already used in the A10 device-tree and already
documented in the device-tree bindings.
Maxime Ripard [Fri, 18 Jan 2019 14:51:29 +0000 (15:51 +0100)]
drm/sun4i: Set the coef_rdy bit right after the coef have been set
The COEF_RDY bit is used to tell the hardware that new FIR filters
coefficients have been written to the registers and that the hardware
should take them into account starting next frame.
Maxime Ripard [Fri, 18 Jan 2019 14:51:28 +0000 (15:51 +0100)]
drm/sun4i: frontend: Add a quirk structure
The ACCESS_CTRL bit is not found on all the variants of the frontend, so
let's introduce a structure that will hold whether or not we need to set
it, and associate it with the compatible.
This will be extended for further similar quirks later on.
Maxime Ripard [Fri, 18 Jan 2019 14:51:27 +0000 (15:51 +0100)]
drm/sun4i: Move access control before setting the register as documented
Unlike what is currently being done, the ACCESS_CTRL bit documentation asks
that this bit should be set before modifying any register. The code in the
BSP also does this, so make sure we do this as well.
drm/sun4i: frontend: Add and use helper for checking tiling support
This introduces a helper to check whether a frontend input format
supports tiling mode. This helper is used when tiling is requested in
the frontend format support helper.
Only semiplanar and planar YUV formats are supported by the hardware.
drm/sun4i: Add buffer stride and offset configuration for tiling mode
This introduces stride and offset configuration for the VPU tiling mode.
Stride is calculated differently than it is for linear formats and an
offset is calculated, for which new register definitions are introduced.
drm/fourcc: Add definitions for Allwinner vendor and VPU tiled format
This introduces specific definitions for vendor Allwinner and its
associated tiled format modifier. This modifier is used for the output
format of the VPU, that can be imported directly with the display
engine hardware supported by the sun4i-drm driver.
drm/sun4i: frontend: Add support for planar YUV input formats
Planar YUV formats come with 3 distinct planes, which requires
configuring the frontend line stride and address registers for the
third plane.
Our hardware only supports the YUV planes order and in order to support
formats with a YVU plane order, a helper is introduced to indicate
whether to invert the address of the two chroma planes.
Missing definitions for YUV411 and YUV444 input format configuration are
also introduced as support is added for these formats. For the input
sequence part, no configuration is required for planar YUV formats so
zero is returned in that case.
drm/sun4i: frontend: Add support for semi-planar YUV input formats
Semi-planar YUV formats use two distinct planes, one for luminance and
one for chrominance. To add support for them, we need to configure the
second line stride and buffer address registers to setup the second YUV
plane.
New definitions are introduced to configure the input format register
for the YUV420 and YUV422 semi-planar formats.
drm/sun4i: frontend: Add support for packed YUV422 input formats
This introduces support for packed YUV formats with 4:2:2 sampling using
the frontend. Definitions are introduced for the data format and pixel
sequence input format register values.
drm/sun4i: frontend: Configure and enable YUV to RGB CSC when needed
In prevision of adding support for YUV formats, set the YUV to RGB
colorspace conversion coefficients if required and don't bypass the
CSC engine when converting.
The BT601 coefficients from the A33 BSP are copied over from the backend
code. Because of module inter-dependency, we can't have the frontend use
these coefficients from the backend directly.
drm/sun4i: Move the BT.601 CSC coefficients to the frontend
Both the backend and the frontend need the BT.601 CSC coefficients for
YUV to RGB conversion. Since the backend has a dependency on the
frontend (and not the other way round), move the coefficients there
so that both can access them without having to duplicate them.
drm/sun4i: frontend: Determine input format based on colorspace
Since all the RGB input formats have the same value for the DATA_FMT
field of the INPUT_FMT register, we can group them when the format is
known to be RGB. Here, we assume that a non-YUV format is RGB, because
the hardware does not support any other colorspace than RGB and YUV.
Use the DRM format info structure to check whether the format uses a
YUV colorspace.
drm/sun4i: frontend: Pass DRM format info to input format helpers
The helper returning the input mode needs to know the number of planes
for the provided format. Passing the fourcc requires iterating through
the format info list in order to return the number of planes.
Pass the DRM format info structure directly instead to all helpers
related to configuring the input format, since it's available to the
caller. Also rename the input format in the caller function to keep
things consistent.
drm/fourcc: Add format info helpers for checking YUV sub-sampling
Display engine drivers often need to distinguish between different types of
YUV sub-sampling. This introduces helpers to check for common sub-sampling
ratios in their commonly-used denomination from the DRM format info.
drm/fourcc: Add format info helpers for checking YUV planes disposition
It is often useful to check whether the DRM format info retrieved from
the DRM framebuffer matches a specific YUV planes disposition.
This introduces helpers to quickly check that a provided format info
matches a YUV format with a specific disposition, in commonly-used
terminology.
The intent of providing helpers taking the format info instead of the
fourcc alone is to avoid the overhead of iterating through all formats
when the whole format info structure is available. As a result, these
helpers are very simple so they are made inline.
Peter Rosin [Fri, 11 Jan 2019 15:19:05 +0000 (15:19 +0000)]
dt-bindings: display: bridge: thc63lvdm83d: use standard powerdown-gpios
The name powerdown-gpios is the standard property name for the
functionality covered by the previous pwdn-gpios name. This rename
should be safe to do since the linux driver supporting the binding
(lvds-encoder.c) never implemented the property, and no dts file
names it. At least not upstream.
Noralf Trønnes [Tue, 15 Jan 2019 04:36:42 +0000 (05:36 +0100)]
drm/tinydrm: Use damage helper for dirtyfb
This switches to drm_atomic_helper_dirtyfb() as the framebuffer dirty
handler. All flushing will now happen in the pipe functions.
Also enable the damage plane property for all except repaper which can
only do full updates.
ili9225:
This change made ili9225_init() equal to mipi_dbi_init() so use it.
v3: Include vblank header (Sam)
ili9225 and st7586 can't use mipi_dbi_enable_flush() (David)
v2: Remove fb check in mipi_dbi_enable_flush() it can't be NULL
(kbuild test robot)
Cc: David Lechner <david@lechnology.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: David Lechner <david@lechnology.com> Reviewed-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-5-noralf@tronnes.org
Noralf Trønnes [Tue, 15 Jan 2019 04:36:41 +0000 (05:36 +0100)]
drm/tinydrm: Use struct drm_rect
This prepares for the switch to drm_atomic_helper_dirtyfb() in the next
patch. The damage helper returns a drm_rect so switch to that everywhere
including using a pointer in the dirty functions.
This is a non-functional change except for the debug print which looks a
bit different.
Sam Ravnborg [Tue, 15 Jan 2019 21:48:45 +0000 (22:48 +0100)]
drm: fix alpha build after drm_util.h change
0-DAY reported the following bug:
tree: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
head: 21376e2c3c5bad5e87ba700c055c8a8235c2bfd5
commit: e9eafcb589213395232084a2378e2e90f67feb29 [1/2] drm: move drm_can_sleep() to drm_util.h
config: alpha-allmodconfig (attached as .config)
...
In file included from include/linux/irqflags.h:16:0,
from include/drm/drm_util.h:35,
from drivers/gpu/drm/qxl/qxl_cmd.c:28:
>> arch/alpha/include/asm/irqflags.h:58:15: error: unknown type name 'bool'
static inline bool arch_irqs_disabled_flags(unsigned long flags)
^~~~
And later following bug:
tree: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
head: 21376e2c3c5bad5e87ba700c055c8a8235c2bfd5
commit: e9eafcb589213395232084a2378e2e90f67feb29 [1/2] drm: move drm_can_sleep() to drm_util.h
config: ia64-allyesconfig (attached as .config)
...
In file included from arch/ia64/include/asm/irqflags.h:14,
from include/linux/irqflags.h:16,
from include/drm/drm_util.h:35,
from drivers/gpu/drm/qxl/qxl_cmd.c:28:
arch/ia64/include/asm/pal.h: In function 'ia64_pal_tr_read':
arch/ia64/include/asm/pal.h:1703:64: error: implicit declaration of function 'ia64_tpa'; did you mean 'ia64_pal'? [-Werror=implicit-function-declaration]
PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer));
^~~~~~~~
...
So we have a situation where we do not pull in <linux/types.h>
when building for alpha and for ia64 we need even more definitions
are required.
Two invasive fixes where considered:
- Change all declarations of arch_irqs_disabled_flags() to use bool
- Add include of <linux/types.h> to all files that uses bool for
arch_irqs_disabled_flags
To invasive with a too high pain/benefit ratio, so dropped.
They would not cover ia64 either.
Some less invasive fixes was also considered:
- Add include of <linux/types.h> to drm_util.h
- Add include of <linux/interrupt.h> to drm_util.h
The first was dropped as this did not cover the ia64 case.
The latter was considered the best option as there could
be other similar cases and we would like the header files below
include/drm/ to be selfcontained.
So we end up pulling in a lot of stuff not needed, but this is
the price we pay in drm/ because the kernel headers are not all
selfcontained.
While at it, ordred the includefiles in drm_util in alphabetical order.
Build tested with alpha,ia64,arm,x86 with allmodconfig and allyesconfig.
v2:
- fix ia64 build, changed to include interrupt.h
- sort include files alphabetically
Fixes: 733748ac37b45 ("drm: move drm_can_sleep() to drm_util.h") Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190115214845.8117-1-sam@ravnborg.org
Lyude Paul [Tue, 15 Jan 2019 20:08:00 +0000 (15:08 -0500)]
drm/i915: Pass down rc in intel_encoder->compute_config()
Something that I completely missed when implementing the new MST VCPI
atomic helpers is that with those helpers, there's technically a chance
of us having to grab additional modeset locks in ->compute_config() and
furthermore, that means we have the potential to hit a normal modeset
deadlock. However, because ->compute_config() only returns a bool this
means we can't return -EDEADLK when we need to drop locks and try again
which means we end up just failing the atomic check permanently. Whoops.
So, fix this by modifying ->compute_config() to pass down an actual
error code instead of a bool so that the atomic check can be restarted
on modeset deadlocks.
Thanks to Ville Syrjälä for pointing this out!
Changes since v1:
* Add some newlines
* Return only -EINVAL from hsw_crt_compute_config()
* Propogate return code from intel_dp_compute_dsc_params()
* Change all of the intel_dp_compute_link_config*() variants
* Don't miss if (hdmi_port_clock_valid()) branch in
intel_hdmi_compute_config()
Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109320 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190115200800.3121-1-lyude@redhat.com
Shayenne Moura [Fri, 11 Jan 2019 14:47:29 +0000 (12:47 -0200)]
drm: Complete remove drm_mode_object dependency
This patch finalizes the KMS cleanup task dependency from
drm_display_mode. It removes the use of drm_mode_object
from drm_display_mode struct and it removes the use of
base.id and base.type from drm_display_mode struct
print string.
Shayenne Moura [Fri, 11 Jan 2019 14:45:48 +0000 (12:45 -0200)]
drm: Remove use of drm_mode_object
This patch removes the drm_mode_object prints, evaluation and use from
drm_display_mode objects used in drm files. It removes dependency from
drm_mode_object.
There is a plan to build the kernel with -Wimplicit-fallthrough and
these places in the code produced warnings (W=1). Fix them up.
This commit remove the following warnings:
include/linux/compiler.h:77:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/asm-generic/bug.h:134:2: note: in expansion of macro 'unlikely'
drivers/gpu/drm/drm_dp_helper.c:155:3: note: in expansion of macro 'WARN'
include/linux/compiler.h:77:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/asm-generic/bug.h:134:2: note: in expansion of macro 'unlikely'
drivers/gpu/drm/drm_dp_helper.c:173:3: note: in expansion of macro 'WARN'
drivers/gpu/drm/drm_dp_helper.c:547:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
On i965gm we need to adjust max_vblank_count dynamically
depending on whether the TV encoder is used or not. To
that end add a per-crtc max_vblank_count that takes
precedence over its device wide counterpart. The driver
can now call drm_crtc_set_max_vblank_count() to configure
the per-crtc value before calling drm_vblank_on().
Also looks like there was some discussion about exynos needing
similar treatment.
v2: Drop the extra max_vblank_count!=0 check for the
WARN(last!=current), will take care of it in i915 code (Daniel)
WARN_ON(!inmodeset) (Daniel)
WARN_ON(dev->max_vblank_count)
Pimp up the docs (Daniel)
Noralf Trønnes [Wed, 28 Nov 2018 21:27:10 +0000 (22:27 +0100)]
drm/mxsfb: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Noralf Trønnes [Wed, 28 Nov 2018 21:27:09 +0000 (22:27 +0100)]
drm/hisilicon/kirin: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
struct kirin_drm_private can be removed now that driver doesn't have to
store the fbdev pointer.
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-2-noralf@tronnes.org
Sam Ravnborg [Sat, 12 Jan 2019 19:32:45 +0000 (20:32 +0100)]
drm: move EXPORT_SYMBOL_FOR_TESTS_ONLY to drm_util.h
In the quest to get rid of drmP.h move the newly
added EXPORT_SYMBOL_FOR_TESTS_ONLY to drm_util.h.
Fix the single user.
Add a note to drmP.h to avoid further use of it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190112193251.20450-3-sam@ravnborg.org
Sam Ravnborg [Sat, 12 Jan 2019 19:32:44 +0000 (20:32 +0100)]
drm: move drm_can_sleep() to drm_util.h
Move drm_can_sleep() out of drmP.h to allow users
to get rid of the drmP.h include.
There was no header file that was a good match for this helper function.
So add this to drm_util with the relevant includes.
Add include of drm_util.h to all users.
v2:
- Update comments to use kernel-doc style (Daniel)
- Add FIXME to drm_can_sleep and add note that this
function should not be used in new code (Daniel)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190112193251.20450-2-sam@ravnborg.org
Daniel Vetter [Fri, 11 Jan 2019 16:40:45 +0000 (17:40 +0100)]
drm/of: Fix kerneldoc
I noticed a link that didn't work ...
Fixes: 1f2db3034c9f ("drm: of: introduce drm_of_find_panel_or_bridge") Cc: Rob Herring <robh@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111164048.29067-2-daniel.vetter@ffwll.ch
Linus Walleij [Fri, 11 Jan 2019 17:54:06 +0000 (18:54 +0100)]
drm/panel: Add a driver for the TPO TPG110
The TPO (Toppoly) TPG110 is a pretty generic display driver
similar in vein to the Ilitek 93xx devices. It is not a panel
per se but a driver used with several low-cost noname panels.
This is used on the Nomadik NHK15 combined with a OSD
OSD057VA01CT display for WVGA 800x480.
The driver is pretty minimalistic right now but can be
extended to handle non-default polarities, gamma correction
etc.
The driver is based on the baked-in code in
drivers/video/fbdev/amba-clcd-nomadik.c which will be
decomissioned once this us upstream.
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
When drivers pass non-empty lists of modifiers for initializing their
planes, we can infer that they allow framebuffer modifiers and set the
driver's allow_fb_modifiers mode config element.
In case the allow_fb_modifiers element was not set (some drivers tend
to set them after registering planes), the modifiers will still be
registered but won't be available to userspace unless the flag is set
later. However in that case, the IN_FORMATS blob won't be created.
In order to avoid this case and generally reduce the trouble associated
with the flag, always set allow_fb_modifiers when a non-empty list of
format modifiers is passed at plane init.
drm/vc4: Limit SAND tiling support to semiplanar YUV420 formats
Despite what the HVS documentation indicates, the VC4 does not actually
support SAND tiling modes for any RGB format and only semiplanar YUV420
formats (NV12/NV21) can be used in these tiling modes.
The driver currently claims to support RGB formats for the associated
modifiers, so remove them from the supported list in the
format_mod_supported helper for RGB formats.
Remove further checks that are no longer necessary along the way, since
semi-planar YUV420 formats support every SAND tiling mode.
Daniel Vetter [Mon, 17 Dec 2018 19:42:59 +0000 (20:42 +0100)]
drm: Unexport drm_crtc_force_disable
It's a legacy kms only thing, good to hide it better now that all
those old drivers use the legacy crtc helpers directly.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-3-daniel.vetter@ffwll.ch
Daniel Vetter [Mon, 17 Dec 2018 19:42:58 +0000 (20:42 +0100)]
drm/nouveau: Stop using drm_crtc_force_disable
The correct way for legacy drivers to update properties that need to
do a full modeset, is to do a full modeset.
Note that we don't need to call the drm_mode_config_internal helper
because we're not changing any of the refcounted paramters.
v2: Fixup error handling (Ville). Since the old code didn't bother
I decided to just delete it instead of adding even more code for just
error handling.
Daniel Vetter [Mon, 17 Dec 2018 19:42:57 +0000 (20:42 +0100)]
drm/ch7006: Stop using drm_crtc_force_disable
The correct way for legacy drivers to update properties that need to
do a full modeset, is to do a full modeset.
Note that we don't need to call the drm_mode_config_internal helper
because we're not changing any of the refcounted paramters.
v2: Fixup error handling (Ville). Since the old code didn't bother
I decided to just delete it instead of adding even more code for just
error handling.
Lyude Paul [Fri, 11 Jan 2019 00:53:43 +0000 (19:53 -0500)]
drm/nouveau: Use atomic VCPI helpers for MST
Currently, nouveau uses the yolo method of setting up MST displays: it
uses the old VCPI helpers (drm_dp_find_vcpi_slots()) for computing the
display configuration. These helpers don't take care to make sure they
take a reference to the mstb port that they're checking, and
additionally don't actually check whether or not the topology still has
enough bandwidth to provide the VCPI tokens required.
So, drop usage of the old helpers and move entirely over to the atomic
helpers.
Changes since v6:
* Cleanup atomic check logic and remove a bunch of unneeded checks -
danvet
Changes since v5:
* Update nv50_msto_atomic_check() and nv50_mstc_atomic_check() to the
new requirements for drm_dp_atomic_find_vcpi_slots() and
drm_dp_atomic_release_vcpi_slots()
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Juston Li <juston.li@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-21-lyude@redhat.com
There has been a TODO waiting for quite a long time in
drm_dp_mst_topology.c:
/* We cannot rely on port->vcpi.num_slots to update
* topology_state->avail_slots as the port may not exist if the parent
* branch device was unplugged. This should be fixed by tracking
* per-port slot allocation in drm_dp_mst_topology_state instead of
* depending on the caller to tell us how many slots to release.
*/
That's not the only reason we should fix this: forcing the driver to
track the VCPI allocations throughout a state's atomic check is
error prone, because it means that extra care has to be taken with the
order that drm_dp_atomic_find_vcpi_slots() and
drm_dp_atomic_release_vcpi_slots() are called in in order to ensure
idempotency. Currently the only driver actually using these helpers,
i915, doesn't even do this correctly: multiple ->best_encoder() checks
with i915's current implementation would not be idempotent and would
over-allocate VCPI slots, something I learned trying to implement
fallback retraining in MST.
So: simplify this whole mess, and teach drm_dp_atomic_find_vcpi_slots()
and drm_dp_atomic_release_vcpi_slots() to track the VCPI allocations for
each port. This allows us to ensure idempotency without having to rely
on the driver as much. Additionally: the driver doesn't need to do any
kind of VCPI slot tracking anymore if it doesn't need it for it's own
internal state.
Additionally; this adds a new drm_dp_mst_atomic_check() helper which
must be used by atomic drivers to perform validity checks for the new
VCPI allocations incurred by a state.
Also: update the documentation and make it more obvious that these
/must/ be called by /all/ atomic drivers supporting MST.
Changes since v9:
* Add some missing changes that were requested by danvet that I forgot
about after I redid all of the kref stuff:
* Remove unnecessary state changes in intel_dp_mst_atomic_check
* Cleanup atomic check logic for VCPI allocations - all we need to check in
compute_config is whether or not this state disables a CRTC, then free
VCPI based off that
Changes since v8:
* Fix compile errors, whoops!
Changes since v7:
- Don't check for mixed stale/valid VCPI allocations, just rely on
connector registration to stop such erroneous modesets
Changes since v6:
- Keep a kref to all of the ports we have allocations on. This required
a good bit of changing to when we call drm_dp_find_vcpi_slots(),
mainly that we need to ensure that we only redo VCPI allocations on
actual mode or CRTC changes, not crtc_state->active changes.
Additionally, we no longer take the registration of the DRM connector
for each port into account because so long as we have a kref to the
port in the new or previous atomic state, the connector will stay
registered.
- Use the small changes to drm_dp_put_port() to add even more error
checking to make misusage of the helpers more obvious. I added this
after having to chase down various use-after-free conditions that
started popping up from the new helpers so no one else has to
troubleshoot that.
- Move some accidental DRM_DEBUG_KMS() calls to DRM_DEBUG_ATOMIC()
- Update documentation again, note that find/release() should both not be
called on the same port in a single atomic check phase (but multiple
calls to one or the other is OK)
Changes since v4:
- Don't skip the atomic checks for VCPI allocations if no new VCPI
allocations happen in a state. This makes the next change I'm about
to list here a lot easier to implement.
- Don't ignore VCPI allocations on destroyed ports, instead ensure that
when ports are destroyed and still have VCPI allocations in the
topology state, the only state changes allowed are releasing said
ports' VCPI. This prevents a state with a mix of VCPI allocations
from destroyed ports, and allocations from valid ports.
Changes since v3:
- Don't release VCPI allocations in the topology state immediately in
drm_dp_atomic_release_vcpi_slots(), instead mark them as 0 and skip
over them in drm_dp_mst_duplicate_state(). This makes it so
drm_dp_atomic_release_vcpi_slots() is still idempotent while also
throwing warnings if the driver messes up it's book keeping and tries
to release VCPI slots on a port that doesn't have any pre-existing
VCPI allocation - danvet
- Change mst_state/state in some debugging messages to "mst state"
Changes since v2:
- Use kmemdup() for duplicating MST state - danvet
- Move port validation out of duplicate state callback - danvet
- Handle looping through MST topology states in
drm_dp_mst_atomic_check() so the driver doesn't have to do it
- Fix documentation in drm_dp_atomic_find_vcpi_slots()
- Move the atomic check for each individual topology state into it's
own function, reduces indenting
- Don't consider "stale" MST ports when calculating the bandwidth
requirements. This is needed because originally we relied on the
state duplication functions to prune any stale ports from the new
state, which would prevent us from incorrectly considering their
bandwidth requirements alongside legitimate new payloads.
- Add function references in drm_dp_atomic_release_vcpi_slots() - danvet
- Annotate atomic VCPI and atomic check functions with __must_check
- danvet
Changes since v1:
- Don't use the now-removed ->atomic_check() for private objects hook,
just give drivers a function to call themselves
Lyude Paul [Fri, 11 Jan 2019 00:53:40 +0000 (19:53 -0500)]
drm/dp_mst: Add some atomic state iterator macros
Changes since v6:
- Move EXPORT_SYMBOL() for drm_dp_mst_topology_state_funcs to this
commit
- Document __drm_dp_mst_state_iter_get() and note that it shouldn't be
called directly
Lyude Paul [Fri, 11 Jan 2019 00:53:39 +0000 (19:53 -0500)]
drm/nouveau: Grab payload lock in nv50_msto_payload()
Going through the currently programmed payloads isn't safe without
holding mgr->payload_lock, so actually do that and warn if anyone tries
calling nv50_msto_payload() in the future without grabbing the right
locks.
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Juston Li <juston.li@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-17-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:38 +0000 (19:53 -0500)]
drm/nouveau: Stop unsetting mstc->port, use malloc refs
Same as we did for i915, but for nouveau this time. Additionally, we
grab a malloc reference to the port that lasts for the entire lifetime
of nv50_mstc, which gives us the guarantee that mstc->port will always
point to valid memory for as long as the mstc stays around.
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Juston Li <juston.li@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-16-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:37 +0000 (19:53 -0500)]
drm/nouveau: Keep malloc references to MST ports
Now that we finally have a sane way to keep port allocations around, use
it to fix the potential unchecked ->port accesses that nouveau makes by
making sure we keep the mst port allocated for as long as it's
drm_connector is accessible.
Additionally, now that we've guaranteed that mstc->port is allocated for
as long as we keep mstc around we can remove the connector registration
checks for codepaths which release payloads, allowing us to release
payloads on active topologies properly. These registration checks were
only required before in order to avoid situations where mstc->port could
technically be pointing at freed memory.
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Juston Li <juston.li@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-15-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:36 +0000 (19:53 -0500)]
drm/nouveau: Remove unnecessary VCPI checks in nv50_msto_cleanup()
There is no need to look at the port's VCPI allocation before calling
drm_dp_mst_deallocate_vcpi(), as we already have msto->disabled to let
us avoid cleaning up an msto more then once. The DP MST core will never
call drm_dp_mst_deallocate_vcpi() on it's own, which is presumably what
these checks are meant to protect against.
More importantly though, we're about to stop clearing mstc->port in the
next commit, which means if we could potentially hit a use-after-free
error if we tried to check mstc->port->vcpi here. So to make life easier
for anyone who bisects this code in the future, use msto->disabled
instead to check whether or not we need to deallocate VCPI instead.
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Juston Li <juston.li@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-14-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:35 +0000 (19:53 -0500)]
drm/nouveau: Remove bogus cleanup in nv50_mstm_add_connector()
Trying to destroy the connector using mstc->connector.funcs->destroy()
if connector initialization fails is wrong: there is no possible
codepath in nv50_mstc_new where nv50_mstm_add_connector() would return
<0 and mstc would be non-NULL.
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Juston Li <juston.li@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-13-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:34 +0000 (19:53 -0500)]
drm/amdgpu/display: Keep malloc ref to MST port
Just like i915 and nouveau, it's a good idea for us to hold a malloc
reference to the port here so that we never pass a freed pointer to any
of the DP MST helper functions.
Also, we stop unsetting aconnector->port in
dm_dp_destroy_mst_connector(). There's literally no point to that
assignment that I can see anyway.
Lyude Paul [Fri, 11 Jan 2019 00:53:33 +0000 (19:53 -0500)]
drm/i915: Keep malloc references to MST ports
So that the ports stay around until we've destroyed the connectors, in
order to ensure that we don't pass an invalid pointer to any MST helpers
once we introduce the new MST VCPI helpers.
Changes since v1:
* Move drm_dp_mst_get_port_malloc() to where we assign
intel_connector->port - danvet
projects / mirror_ubuntu-jammy-kernel.git / log