powerpc/mm/book3s: Update pmd_present to look at _PAGE_PRESENT bit
With this patch we use 0x8000000000000000UL (_PAGE_PRESENT) to indicate a valid
pgd/pud/pmd entry. We also switch the p**_present() to look at this bit.
With pmd_present, we have a special case. We need to make sure we consider a
pmd marked invalid during THP split as present. Right now we clear the
_PAGE_PRESENT bit during a pmdp_invalidate. Inorder to consider this special
case we add a new pte bit _PAGE_INVALID (mapped to _RPAGE_SW0). This bit is
only used with _PAGE_PRESENT cleared. Hence we are not really losing a pte bit
for this special case. pmd_present is also updated to look at _PAGE_INVALID.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv: Make possible for user to force a full ipl cec reboot
Ever since fast reboot is enabled by default in opal,
opal_cec_reboot() will use fast-reset instead of full IPL to perform
system reboot. This leaves the user with no direct way to force a full
IPL reboot except changing an nvram setting that persistently disables
fast-reset for all subsequent reboots.
This patch provides a more direct way for the user to force a one-shot
full IPL reboot by passing the command line argument 'full' to the
reboot command. So the user will be able to tweak the reboot behavior
via:
$ sudo reboot full # Force a full ipl reboot skipping fast-reset
or
$ sudo reboot # default reboot path (usually fast-reset)
The reboot command passes the un-parsed command argument to the kernel
via the 'Reboot' syscall which is then passed on to the arch function
pnv_restart(). The patch updates pnv_restart() to handle this cmd-arg
and issues opal_cec_reboot2 with OPAL_REBOOT_FULL_IPL to force a full
IPL reset.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Thu, 20 Sep 2018 09:41:11 +0000 (19:41 +1000)]
powerpc/perf: Add missing break in power7_marked_instr_event()
In power7_marked_instr_event() there is a switch case that is missing
a break or an explicit fallthrough, it's not immediately clear which
it should be.
The function determines based on the PMU event code, whether the event
is a "marked" event (which then requires us to configure the PMU in a
certain way). On Power7 there is no specific bit(s) in the event to
tell us that, we just have to know.
Rather than having a full list of every event and whether they are
marked, we pull apart the event code and for events with certain
values of certain fields we can say that those are all marked events.
We take the psel (bits 0-7) of the event, and look at bits 4-7. For a
value of 6 we say that if the entire psel == 0x64 then if the pmc == 3
the event is marked, else not, and otherwise we continue.
It is then that we fallthrough to the 8 case, where we return true if
the unit == 0xd.
The question is should the 6 case also fallthrough and check for
unit == 0xd, or should it return.
Looking at the full list of events we see that there are zero events
where (psel >> 4) == 0x6 and unit == 0xd.
So the answer is it doesn't really matter, there are no valid event
codes that will return a different result whether we fallthrough or
break.
But equally, testing the 6 case events against unit == 0xd is slightly
bogus, as there are no such events. So to make the code clearer, and
avoid any future confusion, have the 6 case break rather than falling
through.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Revert "convert SLB miss handlers to C" and subsequent commits
This reverts commits: 5e46e29e6a97 ("powerpc/64s/hash: convert SLB miss handlers to C") 8fed04d0f6ae ("powerpc/64s/hash: remove user SLB data from the paca") 655deecf67b2 ("powerpc/64s/hash: SLB allocation status bitmaps") 2e1626744e8d ("powerpc/64s/hash: provide arch_setup_exec hooks for hash slice setup") 89ca4e126a3f ("powerpc/64s/hash: Add a SLB preload cache")
This series had a few bugs, and the fixes are not all trivial. So
revert most of it for now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Hari Bathini [Fri, 14 Sep 2018 14:06:02 +0000 (19:36 +0530)]
powerpc/fadump: re-register firmware-assisted dump if already registered
Firmware-Assisted Dump (FADump) needs to be registered again after any
memory hot add/remove operation to update the crash memory ranges. But
currently, the kernel returns '-EEXIST' if we try to register without
uregistering it first. This could expose the system to racing issues
while unregistering and registering FADump from userspace during udev
events. Spare the userspace of this and let it be taken care of in the
kernel space for a simpler interface.
Since this change, running 'echo 1 > /sys/kernel/fadump_registered'
would result in re-regisering (unregistering and registering) FADump,
if it was already registered.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In lparcfg_write we hard code kbuf_sz and then use this as the variable
length of kbuf creating a variable length array. Since we're hard coding
the length anyway just define the array using this as the length and
remove the need for kbuf_sz, thus removing the variable length array.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/prom: Remove VLA in prom_check_platform_support()
In prom_check_platform_support() we retrieve and parse the
"ibm,arch-vec-5-platform-support" property of the chosen node.
Currently we use a variable length array however to avoid this use an
array of constant length 8.
This property is used to indicate the supported options of vector 5
bytes 23-26 of the ibm,architecture.vec node. Each of these options
is a pair of bytes, thus for 4 options we have a max length of 8 bytes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Fri, 14 Sep 2018 04:06:48 +0000 (13:36 +0930)]
powerpc: Fix duplicate const clang warning in user access code
This re-applies commit b91c1e3e7a6f ("powerpc: Fix duplicate const
clang warning in user access code") (Jun 2015) which was undone in
commits: f2ca80905929 ("powerpc/sparse: Constify the address pointer in __get_user_nosleep()") (Feb 2017) d466f6c5cac1 ("powerpc/sparse: Constify the address pointer in __get_user_nocheck()") (Feb 2017) f84ed59a612d ("powerpc/sparse: Constify the address pointer in __get_user_check()") (Feb 2017)
We see a large number of duplicate const errors in the user access
code when building with llvm/clang:
The problem is we are doing const __typeof__(*(ptr)), which will hit
the warning if ptr is marked const.
Removing const does not seem to have any effect on GCC code
generation.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start':
(.text+0x58): multiple definition of '_zimage_start';
arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here
Clang requires the .weak directive to appear after the symbol is
declared. The binutils manual says:
This directive sets the weak attribute on the comma separated list of
symbol names. If the symbols do not already exist, they will be
created.
So it appears this is different with clang. The only reference I could
see for this was an OpenBSD mailing list post[1].
Changing it to be after the declaration fixes building with Clang, and
still works with GCC.
Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Joel Stanley [Tue, 18 Sep 2018 03:36:17 +0000 (13:06 +0930)]
powerpc/configs: Update skiroot defconfig
Disable new features from recent releases, and clean out some other
unused options:
- Enable EXPERT, so we can disable some things
- Disable non-powerpc BPF decoders
- Disable TASKSTATS
- Disable unused syscalls
- Set more things to be modules
- Turn off unused network vendors
- PPC_OF_BOOT_TRAMPOLINE and FB_OF are unused on powernv
- Drop unused Radeon and Matrox GPU drivers
- IPV6 support landed in petitboot
- Bringup related command line powersave=off dropped, switch to quiet
Set CONFIG_I2C_CHARDEV=y as the module is not loaded automatically, and
without this i2cget etc. will fail in the skiroot environment.
This defconfig gets us build coverage of KERNEL_XZ, which was broken in
the 4.19 merge window for powerpc.
Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/pseries: Disable CPU hotplug across migrations
When performing partition migrations all present CPUs must be online
as all present CPUs must make the H_JOIN call as part of the migration
process. Once all present CPUs make the H_JOIN call, one CPU is returned
to make the rtas call to perform the migration to the destination system.
During testing of migration and changing the SMT state we have found
instances where CPUs are offlined, as part of the SMT state change,
before they make the H_JOIN call. This results in a hung system where
every CPU is either in H_JOIN or offline.
To prevent this this patch disables CPU hotplug during the migration
process.
powerpc/pseries: Remove unneeded uses of dlpar work queue
There are three instances in which dlpar hotplug events are invoked;
handling a hotplug interrupt (in a kvm guest), handling a dlpar
request through sysfs, and updating LMB affinity when handling a
PRRN event. Only in the case of handling a hotplug interrupt do we
have to put the work on a workqueue, the other cases can handle the
dlpar request directly.
This patch exports the handle_dlpar_errorlog() function so that
dlpar hotplug events can be handled directly and updates the two
instances mentioned above to use the direct invocation.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a PRRN event is received we are already running in a worker
thread. Instead of spawning off another worker thread on the prrn_work
workqueue to handle the PRRN event we can just call the PRRN handler
routine directly.
With this update we can also pass the scope variable for the PRRN
event directly to the handler instead of it being a global variable.
This patch fixes the following oops mnessage we are seeing in PRRN testing:
Signed-off-by: John Allen <jallen@linux.ibm.com> Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/pseries/memory-hotplug: Only update DT once per memory DLPAR request
The updates to powerpc numa and memory hotplug code now use the
in-kernel LMB array instead of the device tree. This change allows the
pseries memory DLPAR code to only update the device tree once after
successfully handling a DLPAR request.
Prior to the in-kernel LMB array, the numa code looked up the affinity
for memory being added in the device tree, the code now looks this up
in the LMB array. This change means the memory hotplug code can just
update the affinity for an LMB in the LMB array instead of updating
the device tree.
This also provides a savings in kernel memory. When updating the
device tree old properties are never free'ed since there is no
usecount on properties. This behavior leads to a new copy of the
property being allocated every time a LMB is added or removed (i.e. a
request to add 100 LMBs creates 100 new copies of the property). With
this update only a single new property is created when a DLPAR request
completes successfully.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 14 Sep 2018 15:30:56 +0000 (01:30 +1000)]
powerpc/64s/hash: Add a SLB preload cache
When switching processes, currently all user SLBEs are cleared, and a
few (exec_base, pc, and stack) are preloaded. In trivial testing with
small apps, this tends to miss the heap and low 256MB segments, and it
will also miss commonly accessed segments on large memory workloads.
Add a simple round-robin preload cache that just inserts the last SLB
miss into the head of the cache and preloads those at context switch
time. Every 256 context switches, the oldest entry is removed from the
cache to shrink the cache and require fewer slbmte if they are unused.
Much more could go into this, including into the SLB entry reclaim
side to track some LRU information etc, which would require a study of
large memory workloads. But this is a simple thing we can do now that
is an obvious win for common workloads.
With the full series, process switching speed on the context_switch
benchmark on POWER9/hash (with kernel speculation security masures
disabled) increases from 140K/s to 178K/s (27%).
POWER8 does not change much (within 1%), it's unclear why it does not
see a big gain like POWER9.
Booting to busybox init with 256MB segments has SLB misses go down
from 945 to 69, and with 1T segments 900 to 21. These could almost all
be eliminated by preloading a bit more carefully with ELF binary
loading.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 14 Sep 2018 15:30:53 +0000 (01:30 +1000)]
powerpc/64s/hash: SLB allocation status bitmaps
Add 32-entry bitmaps to track the allocation status of the first 32
SLB entries, and whether they are user or kernel entries. These are
used to allocate free SLB entries first, before resorting to the round
robin allocator.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 14 Sep 2018 15:30:52 +0000 (01:30 +1000)]
powerpc/64s/hash: remove user SLB data from the paca
User SLB mappig data is copied into the PACA from the mm->context so
it can be accessed by the SLB miss handlers.
After the C conversion, SLB miss handlers now run with relocation on,
and user SLB misses are able to take recursive kernel SLB misses, so
the user SLB mapping data can be removed from the paca and accessed
directly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 14 Sep 2018 15:30:51 +0000 (01:30 +1000)]
powerpc/64s/hash: convert SLB miss handlers to C
This patch moves SLB miss handlers completely to C, using the standard
exception handler macros to set up the stack and branch to C.
This can be done because the segment containing the kernel stack is
always bolted, so accessing it with relocation on will not cause an
SLB exception.
Arbitrary kernel memory may not be accessed when handling kernel space
SLB misses, so care should be taken there. However user SLB misses can
access any kernel memory, which can be used to move some fields out of
the paca (in later patches).
User SLB misses could quite easily reconcile IRQs and set up a first
class kernel environment and exit via ret_from_except, however that
doesn't seem to be necessary at the moment, so we only do that if a
bad fault is encountered.
[ Credit to Aneesh for bug fixes, error checks, and improvements to bad
address handling, etc ]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since RFC:
- Added MSR[RI] handling
- Fixed up a register loss bug exposed by irq tracing (Aneesh)
- Reject misses outside the defined kernel regions (Aneesh)
- Added several more sanity checks and error handling (Aneesh), we may
look at consolidating these tests and tightenig up the code but for
a first pass we decided it's better to check carefully.
Since v1:
- Fixed SLB cache corruption (Aneesh)
- Fixed untidy SLBE allocation "leak" in get_vsid error case
- Now survives some stress testing on real hardware
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 14 Sep 2018 15:30:50 +0000 (01:30 +1000)]
powerpc/64s/hash: Use POWER9 SLBIA IH=3 variant in switch_slb
POWER9 introduces SLBIA IH=3, which invalidates all SLB entries and
associated lookaside information that have a class value of 1, which
Linux assigns to user addresses. This matches what switch_slb wants,
and allows a simple fast implementation that avoids the slb_cache
complexity.
As a side-effect, the POWER5 < DD2.1 SLB invalidation workaround is
also avoided on POWER9.
Process context switching rate is improved about 2.2% for a small
process that hits the slb cache which is the best case for the current
code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 14 Sep 2018 15:30:49 +0000 (01:30 +1000)]
powerpc/64s/hash: Use POWER6 SLBIA IH=1 variant in switch_slb
The SLBIA IH=1 hint will remove all non-zero SLBEs, but only
invalidate ERAT entries associated with a class value of 1, for
processors that support the hint (e.g., POWER6 and newer), which
Linux assigns to user addresses.
This prevents kernel ERAT entries from being invalidated when
context switchig (if the thread faulted in more than 8 user SLBEs).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 14 Sep 2018 15:30:48 +0000 (01:30 +1000)]
powerpc/64s/hash: remove the vmalloc segment from the bolted SLB
Remove the vmalloc segment from bolted SLBEs. This is not required to
be bolted, and seems like it was added to help pre-load the SLB on
context switch. However there are now other segments like the vmemmap
segment and non-zero node memory that often take misses after a context
switch, so it is better to solve this in a more general way.
A subsequent change will track free SLB entries and uses those rather
than round-robin overwrite valid entries, which makes it far less
likely for kernel SLBEs to be evicted after they are installed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Early POWER5 revisions (<DD2.1) have a problem requiring slbie
instructions to be repeated under some circumstances. The patch below
adds a workaround (patch made by Anton Blanchard).
The extra slbie in switch_slb is done even for the case where slbia is
called (slb_flush_and_rebolt). I don't believe that is required
because there are other slb_flush_and_rebolt callers which do not
issue the workaround slbie, which would be broken if it was required.
It also seems to be fine inside the isync with the first slbie, as it
is in the kernel stack switch code.
So move this workaround to where it is required. This is not much of
an optimisation because this is the fast path, but it makes the code
more understandable and neater.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Retain slbie_data initialisation to avoid compiler warning] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 14 Sep 2018 15:30:45 +0000 (01:30 +1000)]
powerpc/64s/hash: Fix stab_rr off by one initialization
This causes SLB alloation to start 1 beyond the start of the SLB.
There is no real problem because after it wraps it stats behaving
properly, it's just surprisig to see when looking at SLB traces.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powernv/pseries: consolidate code for mce early handling.
Now that other platforms also implements real mode mce handler,
lets consolidate the code by sharing existing powernv machine check
early code. Rename machine_check_powernv_early to
machine_check_common_early and reuse the code.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/pseries: Dump the SLB contents on SLB MCE errors.
If we get a machine check exceptions due to SLB errors then dump the
current SLB contents which will be very much helpful in debugging the
root cause of SLB errors. Introduce an exclusive buffer per cpu to hold
faulty SLB entries. In real mode mce handler saves the old SLB contents
into this buffer accessible through paca and print it out later in virtual
mode.
With this patch the console will log SLB contents like below on SLB MCE
errors:
powerpc/pseries: Flush SLB contents on SLB MCE errors.
On pseries, as of today system crashes if we get a machine check
exceptions due to SLB errors. These are soft errors and can be fixed
by flushing the SLBs so the kernel can continue to function instead of
system crash. We do this in real mode before turning on MMU. Otherwise
we would run into nested machine checks. This patch now fetches the
rtas error log in real mode and flushes the SLBs on SLB/ERAT errors.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michal Suchanek <msuchanek@suse.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On pseries, the machine check error details are part of RTAS extended
event log passed under Machine check exception section. This patch adds
the definition of rtas MCE event section and related helper
functions.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are cases where the test is not expecting to have the transaction
aborted, but, the test process might have been rescheduled, either in the
OS level or by KVM (if it is running on a KVM guest machine). The process
reschedule will cause a treclaim/recheckpoint which will cause the
transaction to doom, aborting the transaction as soon as the process is
rescheduled back to the CPU. This might cause the test to fail, but this is
not a failure in essence.
If that is the case, TEXASR[FC] is indicated with either
TM_CAUSE_RESCHEDULE or TM_CAUSE_KVM_RESCHEDULE for KVM interruptions.
In this scenario, ignore these two failures and avoid the whole test to
return failure.
Breno Leitao [Thu, 23 Aug 2018 23:26:39 +0000 (20:26 -0300)]
powerpc/xive: Use xive_cpu->chip_id instead of looking it up again
Function xive_native_get_ipi() might use chip_id without it being
initialized, if the CPU node is not found, as reported by smatch:
error: uninitialized symbol 'chip_id'
As suggested by Cédric, we can use xc->chip_id instead of consulting
the device tree for chip id, which is safe since xive_prepare_cpu()
should have initialized ->chip_id by the time xive_native_get_ipi() is
called.
Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
[mpe: Tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The AFU Information DVSEC capability is a means to extract common,
general information about all of the AFUs associated with a Function
independent of the specific functionality that each AFU provides.
Write in the AFU Index field allows to access to the descriptor data
for each AFU.
With the current code, we are not able to access to these specific data
when the index >= 1 because we are writing to the wrong location.
All requests to the data of each AFU are pointing to those of the AFU 0,
which could have impacts when using a card with more than one AFU per
function.
This patch fixes the access to the AFU Descriptor Data indexed by the
AFU Info Index field.
Fixes: 5ef3166e8a32 ("ocxl: Driver code for 'generic' opencapi devices") Cc: stable <stable@vger.kernel.org> # 4.16 Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rashmica Gupta [Fri, 17 Aug 2018 04:25:01 +0000 (14:25 +1000)]
powerpc/memtrace: Remove memory in chunks
When hot-removing memory release_mem_region_adjustable() splits iomem
resources if they are not the exact size of the memory being
hot-deleted. Adding this memory back to the kernel adds a new resource.
Eg a node has memory 0x0 - 0xfffffffff. Hot-removing 1GB from
0xf40000000 results in the single resource 0x0-0xfffffffff being split
into two resources: 0x0-0xf3fffffff and 0xf80000000-0xfffffffff.
When we hot-add the memory back we now have three resources:
0x0-0xf3fffffff, 0xf40000000-0xf7fffffff, and 0xf80000000-0xfffffffff.
This is an issue if we try to remove some memory that overlaps
resources. Eg when trying to remove 2GB at address 0xf40000000,
release_mem_region_adjustable() fails as it expects the chunk of memory
to be within the boundaries of a single resource. We then get the
warning: "Unable to release resource" and attempting to use memtrace
again gives us this error: "bash: echo: write error: Resource
temporarily unavailable"
This patch makes memtrace remove memory in chunks that are always the
same size from an address that is always equal to end_of_memory -
n*size, for some n. So hotremoving and hotadding memory of different
sizes will now not attempt to remove memory that spans multiple
resources.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Breno Leitao [Mon, 18 Jun 2018 22:59:42 +0000 (19:59 -0300)]
powerpc/tm: Fix HTM documentation
This patch simply fix part of the documentation on the HTM code.
This fixes reference to old fields that were renamed in commit 000ec280e3dd ("powerpc: tm: Rename transct_(*) to ck(\1)_state")
It also documents better the flow after commit eb5c3f1c8647 ("powerpc:
Always save/restore checkpointed regs during treclaim/trecheckpoint"),
where tm_recheckpoint can recheckpoint what is in ck{fp,vr}_state
blindly.
Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Joel Stanley [Tue, 21 Aug 2018 02:14:28 +0000 (11:44 +0930)]
powerpc/powernv: Don't select the cpufreq governors
Deciding wich govenors should be built into the kernel can be left to
users to configure.
Fixes: 81f359027a3a ("cpufreq: powernv: Select CPUFreq related Kconfig options for powernv") Signed-off-by: Joel Stanley <joel@jms.id.au>
[mpe: Update powernv/ppc64 defconfigs to enable them by default] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Alan Modra [Fri, 14 Sep 2018 03:40:04 +0000 (13:10 +0930)]
powerpc/vdso: Correct call frame information
Call Frame Information is used by gdb for back-traces and inserting
breakpoints on function return for the "finish" command. This failed
when inside __kernel_clock_gettime. More concerning than difficulty
debugging is that CFI is also used by stack frame unwinding code to
implement exceptions. If you have an app that needs to handle
asynchronous exceptions for some reason, and you are unlucky enough to
get one inside the VDSO time functions, your app will crash.
What's wrong: There is control flow in __kernel_clock_gettime that
reaches label 99 without saving lr in r12. CFI info however is
interpreted by the unwinder without reference to control flow: It's a
simple matter of "Execute all the CFI opcodes up to the current
address". That means the unwinder thinks r12 contains the return
address at label 99. Disabuse it of that notion by resetting CFI for
the return address at label 99.
Note that the ".cfi_restore lr" could have gone anywhere from the
"mtlr r12" a few instructions earlier to the instruction at label 99.
I put the CFI as late as possible, because in general that's best
practice (and if possible grouped with other CFI in order to reduce
the number of CFI opcodes executed when unwinding). Using r12 as the
return address is perfectly fine after the "mtlr r12" since r12 on
that code path still contains the return address.
__get_datapage also has a CFI error. That function temporarily saves
lr in r0, and reflects that fact with ".cfi_register lr,r0". A later
use of r0 means the CFI at that point isn't correct, as r0 no longer
contains the return address. Fix that too.
Signed-off-by: Alan Modra <amodra@gmail.com> Tested-by: Reza Arbab <arbab@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Michael Neuling [Tue, 11 Sep 2018 03:07:56 +0000 (13:07 +1000)]
powerpc/tm: Fix HFSCR bit for no suspend case
Currently on P9N DD2.1 we end up taking infinite TM facility
unavailable exceptions on the first TM usage by userspace.
In the special case of TM no suspend (P9N DD2.1), Linux is told TM is
off via CPU dt-ftrs but told to (partially) use it via
OPAL_REINIT_CPUS_TM_SUSPEND_DISABLED. So HFSCR[TM] will be off from
dt-ftrs but we need to turn it on for the no suspend case.
This patch fixes this by enabling HFSCR TM in this case.
Cc: stable@vger.kernel.org # 4.15+ Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Prevent multiplication result truncation on 32bit. Introduced with
the early timestamp reworrk.
- Ensure microcode revision storage to be consistent under all
circumstances
- Prevent write tearing of PTEs
- Prevent confusion of user and kernel reegisters when dumping fatal
signals verbosely
- Make an error return value in a failure path of the vector
allocation negative. Returning EINVAL might the caller assume
success and causes further wreckage.
- A trivial kernel doc warning fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Use WRITE_ONCE() when setting PTEs
x86/apic/vector: Make error return value negative
x86/process: Don't mix user/kernel regs in 64bit __show_regs()
x86/tsc: Prevent result truncation on 32bit
x86: Fix kernel-doc atomic.h warnings
x86/microcode: Update the new microcode revision unconditionally
x86/microcode: Make sure boot_cpu_data.microcode is up-to-date
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping fixes from Thomas Gleixner:
"Two fixes for timekeeping:
- Revert to the previous kthread based update, which is unfortunately
required due to lock ordering issues. The removal caused boot
failures on old Core2 machines. Add a proper comment why the thread
needs to stay to prevent accidental removal in the future.
- Fix a silly typo in a function declaration"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Revert "Remove kthread"
timekeeping: Fix declaration of read_persistent_wall_and_boot_offset()
Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull cpu hotplug fixes from Thomas Gleixner:
"Two fixes for the hotplug state machine code:
- Move the misplaces smb() in the hotplug thread function to the
proper place, otherwise a half update control struct could be
observed
- Prevent state corruption on error rollback, which causes the state
to advance by one and as a consequence skip it in the bringup
sequence"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Prevent state corruption on error rollback
cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun()
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random driver fix from Ted Ts'o:
"Fix things so the choice of whether or not to trust RDRAND to
initialize the CRNG is configurable via the boot option
random.trust_cpu={on,off}"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: make CPU trust a boot parameter
Merge tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- make setlocalversion more robust about -dirty check
- loosen the pkg-config requirement for Kconfig
- change missing depmod to a warning from an error
- warn modules_install when System.map is missing
* tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: modules_install: warn when missing System.map file
kbuild: make missing $DEPMOD a Warning instead of an Error
kconfig: do not require pkg-config on make {menu,n}config
kconfig: remove a spurious self-assignment
scripts/setlocalversion: git: Make -dirty check more robust
Randy Dunlap [Thu, 6 Sep 2018 23:37:24 +0000 (16:37 -0700)]
kbuild: modules_install: warn when missing System.map file
If there is no System.map file for "make modules_install",
scripts/depmod.sh will silently exit with success, having done
nothing. Since this is an unexpected situation, change it to
report a Warning for the missing file. The behavior is not
changed except for the Warning message.
The (previous) silent success and new Warning can be reproduced
by:
$ make mrproper; make defconfig
$ make modules; make modules_install
and since System.map is produced by "make vmlinux", the steps
above omit producing the System.map file.
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- Fix a VFP corruption in 32-bit guest
- Add missing cache invalidation for CoW pages
- Two small cleanups
s390:
- Fallout from the hugetlbfs support: pfmf interpretion and locking
- VSIE: fix keywrapping for nested guests
PPC:
- Fix a bug where pages might not get marked dirty, causing guest
memory corruption on migration
- Fix a bug causing reads from guest memory to use the wrong guest
real address for very large HPT guests (>256G of memory), leading
to failures in instruction emulation.
x86:
- Fix out of bound access from malicious pv ipi hypercalls
(introduced in rc1)
- Fix delivery of pending interrupts when entering a nested guest,
preventing arbitrarily late injection
- Sanitize kvm_stat output after destroying a guest
- Fix infinite loop when emulating a nested guest page fault and
improve the surrounding emulation code
- Two minor cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
KVM: LAPIC: Fix pv ipis out-of-bounds access
KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2
arm64: KVM: Remove pgd_lock
KVM: Remove obsolete kvm_unmap_hva notifier backend
arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD
KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW
KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting
KVM: s390: vsie: copy wrapping keys to right place
KVM: s390: Fix pfmf and conditional skey emulation
tools/kvm_stat: re-animate display of dead guests
tools/kvm_stat: indicate dead guests as such
tools/kvm_stat: handle guest removals more gracefully
tools/kvm_stat: don't reset stats when setting PID filter for debugfs
tools/kvm_stat: fix updates for dead guests
tools/kvm_stat: fix handling of invalid paths in debugfs provider
tools/kvm_stat: fix python3 issues
KVM: x86: Unexport x86_emulate_instruction()
KVM: x86: Rename emulate_instruction() to kvm_emulate_instruction()
KVM: x86: Do not re-{try,execute} after failed emulation in L2
KVM: x86: Default to not allowing emulation retry in kvm_mmu_page_fault
...
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A few more fixes who have trickled in:
- MMC bus width fixup for some Allwinner platforms
- Fix for NULL deref in ti-aemif when no platform data is passed in
- Fix div by 0 in SCMI code
- Add a missing module alias in a new RPi driver"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
memory: ti-aemif: fix a potential NULL-pointer dereference
firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero
hwmon: rpi: add module alias to raspberrypi-hwmon
arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
Nadav Amit [Sun, 2 Sep 2018 18:14:50 +0000 (11:14 -0700)]
x86/mm: Use WRITE_ONCE() when setting PTEs
When page-table entries are set, the compiler might optimize their
assignment by using multiple instructions to set the PTE. This might
turn into a security hazard if the user somehow manages to use the
interim PTE. L1TF does not make our lives easier, making even an interim
non-present PTE a security hazard.
Using WRITE_ONCE() to set PTEs and friends should prevent this potential
security hazard.
I skimmed the differences in the binary with and without this patch. The
differences are (obviously) greater when CONFIG_PARAVIRT=n as more
code optimizations are possible. For better and worse, the impact on the
binary with this patch is pretty small. Skimming the code did not cause
anything to jump out as a security hazard, but it seems that at least
move_soft_dirty_pte() caused set_pte_at() to use multiple writes.
Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180902181451.80520-1-namit@vmware.com
Thomas Gleixner [Sat, 8 Sep 2018 10:07:26 +0000 (12:07 +0200)]
x86/apic/vector: Make error return value negative
activate_managed() returns EINVAL instead of -EINVAL in case of
error. While this is unlikely to happen, the positive return value would
cause further malfunction at the call site.
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- bugfixes for uniphier, i801, and xiic drivers
- ID removal (never produced) for imx
- one MAINTAINER addition
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Record xilinx i2c with Zynq fragment
i2c: xiic: Make the start and the byte count write atomic
i2c: i801: fix DNV's SMBCTRL register offset
i2c: imx-lpi2c: Remove mx8dv compatible entry
dt-bindings: imx-lpi2c: Remove mx8dv compatible entry
i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP
i2c: uniphier: issue STOP only for last message or I2C_M_STOP
* tag 'arc-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: don't check for HIGHMEM pages in arch_dma_alloc
ARC: IOC: panic if both IOC and ZONE_HIGHMEM enabled
ARC: dma [IOC] Enable per device io coherency
ARC: dma [IOC]: mark DMA devices connected as dma-coherent
ARC: atomics: unbork atomic_fetch_##op()
arc: remove redundant GCC version checks
ARC: sort Kconfig
ARC: cleanup show_faulting_vma()
ARC: [plat-axs*]: Enable SWAP
ARC: [plat-axs*/plat-hsdk]: Allow U-Boot to pass MAC-address to the kernel
ARC: configs: cleanup
David Howells [Fri, 7 Sep 2018 22:55:17 +0000 (23:55 +0100)]
afs: Fix cell specification to permit an empty address list
Fix the cell specification mechanism to allow cells to be pre-created
without having to specify at least one address (the addresses will be
upcalled for).
This allows the cell information preload service to avoid the need to issue
loads of DNS lookups during boot to get the addresses for each cell (500+
lookups for the 'standard' cell list[*]). The lookups can be done later as
each cell is accessed through the filesystem.
Also remove the print statement that prints a line every time a new cell is
added.
[*] There are 144 cells in the list. Each cell is first looked up for an
SRV record, and if that fails, for an AFSDB record. These get a list
of server names, each of which then has to be looked up to get the
addresses for that server. E.g.:
dig srv _afs3-vlserver._udp.grand.central.org
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'md/4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull MD fixes from Shaohua Li:
- Fix a locking issue for md-cluster (Guoqing)
- Fix a sync crash for raid10 (Ni)
- Fix a reshape bug with raid5 cache enabled (me)
* tag 'md/4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md-cluster: release RESYNC lock after the last resync message
RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0
md/raid5-cache: disable reshape completely
Merge tag 'ceph-for-4.19-rc3' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two rbd patches to complete support for images within namespaces that
went into -rc1 and a use-after-free fix.
The rbd changes have been sitting in a branch for quite a while but
couldn't be included into the -rc1 pull request because of a pending
wire protocol backwards compatibility fixup that only got committed
early this week"
* tag 'ceph-for-4.19-rc3' of https://github.com/ceph/ceph-client:
rbd: support cloning across namespaces
rbd: factor out get_parent_info()
ceph: avoid a use-after-free in ceph_destroy_options()
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"Just one small fix here, preventing a VM_WARN_ON when a !present
PMD/PUD is "freed" as part of a huge ioremap() operation.
The correct behaviour is to skip the free silently in this case, which
is a little weird (the function is a bit of a misnomer), but it
follows the x86 implementation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix erroneous warnings in page freeing functions
Merge tag 'acpi-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a regression from the 4.18 cycle in the ACPI driver for
Intel SoCs (LPSS) and prevent dmi_check_system() from being called on
non-x86 systems in the ACPI core.
Specifics:
- Fix a power management regression in the ACPI driver for Intel SoCs
(LPSS) introduced by a system-wide suspend/resume fix during the
4.18 cycle (Zhang Rui).
- Prevent dmi_check_system() from being called on non-x86 systems in
the ACPI core (Jean Delvare)"
* tag 'acpi-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / LPSS: Force LPSS quirks on boot
ACPI / bus: Only call dmi_check_system() on X86
Merge tag 'sound-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few small fixes:
- a fix for the recursive work cancellation in a specific HD-audio
operation mode
- a fix for potentially uninitialized memory access via rawmidi
- the register bit access fixes for ASoC HD-audio"
* tag 'sound-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Fix several mismatch for register mask and value
ALSA: rawmidi: Initialize allocated buffers
ALSA: hda - Fix cancel_work_sync() stall from jackpoll work
Wanpeng Li [Thu, 30 Aug 2018 02:03:30 +0000 (10:03 +0800)]
KVM: LAPIC: Fix pv ipis out-of-bounds access
Dan Carpenter reported that the untrusted data returns from kvm_register_read()
results in the following static checker warning:
arch/x86/kvm/lapic.c:576 kvm_pv_send_ipi()
error: buffer underflow 'map->phys_map' 's32min-s32max'
KVM guest can easily trigger this by executing the following assembly sequence
in Ring0:
As this will cause KVM to execute the following code-path:
vmx_handle_exit() -> handle_vmcall() -> kvm_emulate_hypercall() -> kvm_pv_send_ipi()
which will reach out-of-bounds access.
This patch fixes it by adding a check to kvm_pv_send_ipi() against map->max_apic_id,
ignoring destinations that are not present and delivering the rest. We also check
whether or not map->phys_map[min + i] is NULL since the max_apic_id is set to the
max apic id, some phys_map maybe NULL when apic id is sparse, especially kvm
unconditionally set max_apic_id to 255 to reserve enough space for any xAPIC ID.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
[Add second "if (min > map->max_apic_id)" to complete the fix. -Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2
Consider the case L1 had a IRQ/NMI event until it executed
VMLAUNCH/VMRESUME which wasn't delivered because it was disallowed
(e.g. interrupts disabled). When L1 executes VMLAUNCH/VMRESUME,
L0 needs to evaluate if this pending event should cause an exit from
L2 to L1 or delivered directly to L2 (e.g. In case L1 don't intercept
EXTERNAL_INTERRUPT).
Usually this would be handled by L0 requesting a IRQ/NMI window
by setting VMCS accordingly. However, this setting was done on
VMCS01 and now VMCS02 is active instead. Thus, when L1 executes
VMLAUNCH/VMRESUME we force L0 to perform pending event evaluation by
requesting a KVM_REQ_EVENT.
Note that above scenario exists when L1 KVM is about to enter L2 but
requests an "immediate-exit". As in this case, L1 will
disable-interrupts and then send a self-IPI before entering L2.
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Steven Price [Mon, 13 Aug 2018 16:04:53 +0000 (17:04 +0100)]
arm64: KVM: Remove pgd_lock
The lock has never been used and the page tables are protected by
mmu_lock in struct kvm.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
kvm_unmap_hva is long gone, and we only have kvm_unmap_hva_range to
deal with. Drop the now obsolete code.
Fixes: fb1522e099f0 ("KVM: update to new mmu_notifier semantic v2") Cc: James Hogan <jhogan@kernel.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Marc Zyngier [Thu, 23 Aug 2018 10:51:43 +0000 (11:51 +0100)]
arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD
If trapping FPSIMD in the context of an AArch32 guest, it is critical
to set FPEXC32_EL2.EN to 1 so that the trapping is taken to EL2 and
not EL1.
Conversely, it is just as critical *not* to set FPEXC32_EL2.EN to 1
if we're not going to trap FPSIMD, as we then corrupt the existing
VFP state.
Moving the call to __activate_traps_fpsimd32 to the point where we
know for sure that we are going to trap ensures that we don't set that
bit spuriously.
Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") Cc: stable@vger.kernel.org # v4.18 Cc: Dave Martin <dave.martin@arm.com> Reported-by: Alexander Graf <agraf@suse.de> Tested-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Marc Zyngier [Thu, 23 Aug 2018 08:58:27 +0000 (09:58 +0100)]
KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW
When triggering a CoW, we unmap the RO page via an MMU notifier
(invalidate_range_start), and then populate the new PTE using another
one (change_pte). In the meantime, we'll have copied the old page
into the new one.
The problem is that the data for the new page is sitting in the
cache, and should the guest have an uncached mapping to that page
(or its MMU off), following accesses will bypass the cache.
In a way, this is similar to what happens on a translation fault:
We need to clean the page to the PoC before mapping it. So let's just
do that.
This fixes a KVM unit test regression observed on a HiSilicon platform,
and subsequently reproduced on Seattle.
Fixes: a9c0e12ebee5 ("KVM: arm/arm64: Only clean the dcache on translation fault") Cc: stable@vger.kernel.org # v4.16+ Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Merge tag 'drm-fixes-2018-09-07' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Seems to have been overly quiet this week so I expect next week will
be more stuff, just one pull from Rodrigo with i915 fixes in it.
Quoting Rodrigo:
'The critical fix here on display side is the DP MST regression one.
But this pull also include fixes for DP SST, small VDSC register
fix and GVT's bucked with "BXT fixes, two guest warning fixes,
dmabuf format mod fix and one for recent multiple VM timeout
failure'."
* tag 'drm-fixes-2018-09-07' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dp_mst: Fix enabling pipe clock for all streams
drm/i915/dsc: Fix PPS register definition macros for 2nd VDSC engine
drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"
drm/i915/gvt: Give new born vGPU higher scheduling chance
drm/i915/gvt: Fix drm_format_mod value for vGPU plane
drm/i915/gvt: move intel_runtime_pm_get out of spin_lock in stop_schedule
drm/i915/gvt: Handle GEN9_WM_CHICKEN3 with F_CMD_ACCESS.
drm/i915/gvt: Make correct handling to vreg BXT_PHY_CTL_FAMILY
drm/i915/gvt: emulate gen9 dbuf ctl register access
Dave Airlie [Fri, 7 Sep 2018 01:06:58 +0000 (11:06 +1000)]
Merge tag 'drm-intel-fixes-2018-09-05' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
The critical fix here on display side is the DP MST regression one.
But this pull also include fixes for DP SST, small VDSC register fix
and GVT's bucked with "BXT fixes, two guest warning fixes, dmabuf
format mod fix and one for recent multiple VM timeout failure."
Merge tag 'mips_fixes_4.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Paul Burton:
"A single fix for v4.19-rc3, resolving a problem with our VDSO data
page for systems with dcache aliasing. Those systems could previously
observe stale data, causing clock_gettime() & gettimeofday() to return
incorrect values"
* tag 'mips_fixes_4.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: VDSO: Match data page cache colouring when D$ aliases
Merge tag '4.19-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four small SMB3 fixes, three for stable, and one minor debug
clarification"
* tag '4.19-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: connect to servername instead of IP for IPC$ share
smb3: check for and properly advertise directory lease support
smb3: minor debugging clarifications in rfc1001 len processing
SMB3: Backup intent flag missing for directory opens with backupuid mounts
fs/cifs: don't translate SFM_SLASH (U+F026) to backslash
Peter Zijlstra [Wed, 5 Sep 2018 08:41:58 +0000 (10:41 +0200)]
clocksource: Revert "Remove kthread"
I turns out that the silly spawn kthread from worker was actually needed.
clocksource_watchdog_kthread() cannot be called directly from
clocksource_watchdog_work(), because clocksource_select() calls
timekeeping_notify() which uses stop_machine(). One cannot use
stop_machine() from a workqueue() due lock inversions wrt CPU hotplug.
Revert the patch but add a comment that explain why we jump through such
apparently silly hoops.
Merge tag 'for-linus-20180906' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Small collection of fixes that should go into this release. This
contains:
- Small series that fixes a race between blkcg teardown and writeback
(Dennis Zhou)
- Fix disallowing invalid block size settings from the nbd ioctl (me)
- BFQ fix for a use-after-free on last release of a bfqg (Konstantin
Khlebnikov)
- Fix for the "don't warn for flush" fix (Mikulas)"
* tag 'for-linus-20180906' of git://git.kernel.dk/linux-block:
block: bfq: swap puts in bfqg_and_blkg_put
block: don't warn when doing fsync on read-only devices
nbd: don't allow invalid blocksize settings
blkcg: use tryget logic when associating a blkg with a bio
blkcg: delay blkg destruction until after writeback has finished
Revert "blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()"
i2c: xiic: Make the start and the byte count write atomic
Disable interrupts while configuring the transfer and enable them back.
We have below as the programming sequence
1. start and slave address
2. byte count and stop
In some customer platform there was a lot of interrupts between 1 and 2
and after slave address (around 7 clock cyles) if 2 is not executed
then the transaction is nacked.
To fix this case make the 2 writes atomic.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[wsa: added a newline for better readability] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
Jia He [Tue, 28 Aug 2018 04:53:26 +0000 (12:53 +0800)]
irqchip/gic-v3-its: Cap lpi_id_bits to reduce memory footprint
Commit fe8e93504ce8 ("irqchip/gic-v3-its: Use full range of LPIs"), removes
the cap for lpi_id_bits, which causes the following warning to trigger on a
QDF2400 server:
In its_alloc_lpi_tables(), lpi_id_bits is 24 in QDF2400. The allocation in
allocate_prop_table() tries therefore to allocate 16M (order 12 if
pagesize=4k), which triggers the warning.
As said by MarcL
Capping lpi_id_bits at 16 (which is what we had before) is plenty,
will save a some memory, and gives some margin before we need to push
it up again.
Bring the upper limit of lpi_id_bits back to prevent
Fixes: fe8e93504ce8 ("irqchip/gic-v3-its: Use full range of LPIs") Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jia He <jia.he@hxt-semitech.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Olof Johansson <olof@lixom.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-arm-kernel@lists.infradead.org Link: https://lkml.kernel.org/r/1535432006-2304-1-git-send-email-jia.he@hxt-semitech.com
Fix trivial use-after-free. This could be last reference to bfqg.
Fixes: 8f9bebc33dd7 ("block, bfq: access and cache blkg data only when safe") Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark Rutland [Wed, 5 Sep 2018 16:38:57 +0000 (17:38 +0100)]
arm64: fix erroneous warnings in page freeing functions
In pmd_free_pte_page() and pud_free_pmd_page() we try to warn if they
hit a present non-table entry. In both cases we'll warn for non-present
entries, as the VM_WARN_ON() only checks the entry is not a table entry.
This has been observed to result in warnings when booting a v4.19-rc2
kernel under qemu.
Fix this by bailing out earlier for non-present entries.
Fixes: ec28bb9c9b0826d7 ("arm64: Implement page table free interfaces") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero
Firmware can provide zero as values for sustained performance level and
corresponding sustained frequency in kHz in order to hide the actual
frequencies and provide only abstract values. It may endup with divide
by zero scenario resulting in kernel panic.
Let's set the multiplication factor to one if either one or both of them
(sustained_perf_level and sustained_freq) are set to zero.
Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol") Reported-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'apparmor-pr-2018-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor fix from John Johansen:
"A fix for an issue syzbot discovered last week:
- Fix for bad debug check when converting secids to secctx"
* tag 'apparmor-pr-2018-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix bad debug check in apparmor_secid_to_secctx()
Merge tag 'trace-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This fixes two annoying bugs:
- The first one is a side effect caused by using SRCU for rcuidle
tracepoints. It seems that the perf was depending on the rcuidle
tracepoints to make RCU watch when it wasn't.
The real fix will be to have perf use SRCU instead of depending on
RCU watching, but that can't be done until SRCU is safe to use in
NMI context (Paul's working on that).
- The second bug fix is for a bug that's been periodically making my
tests fail randomly for some time. I haven't had time to track it
down, but finally have. It has to do with stressing NMIs (via perf)
while enabling or disabling ftrace function handling with lockdep
enabled.
If an interrupt happens and just as it returns, it sets lockdep
back to "interrupts enabled" but before it returns an NMI is
triggered, and if this happens while printk_nmi_enter has a
breakpoint attached to it (because ftrace is converting it to or
from nop to call fentry), the breakpoint trap also calls into
lockdep, and since returning from the NMI to a interrupt handler,
interrupts were disabled when the NMI went off, lockdep keeps its
state as interrupts disabled when it returns back from the
interrupt handler where interrupts are enabled.
This causes lockdep_assert_irqs_enabled() to trigger a false
positive"
* tag 'trace-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
printk/tracing: Do not trace printk_nmi_enter()
tracing: Add back in rcu_irq_enter/exit_irqson() for rcuidle tracepoints
Merge tag 'for-4.19-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix for improper fsync after hardlink
- fix for a corruption during file deduplication
- use after free fixes
- RCU warning fix
- fix for buffered write to nodatacow file
* tag 'for-4.19-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Fix suspicious RCU usage warning in btrfs_debug_in_rcu
btrfs: use after free in btrfs_quota_enable
btrfs: btrfs_shrink_device should call commit transaction at the end
btrfs: fix qgroup_free wrong num_bytes in btrfs_subvolume_reserve_metadata
Btrfs: fix data corruption when deduplicating between different files
Btrfs: sync log after logging new name
Btrfs: fix unexpected failure of nocow buffered writes after snapshotting when low on space
------------[ cut here ]------------
IRQs not enabled as expected
WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tick_nohz_idle_enter+0x44/0x8c
Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00
75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0
e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b
EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007
ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296
CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0
Call Trace:
do_idle+0x33/0x202
cpu_startup_entry+0x61/0x63
start_secondary+0x18e/0x1ed
startup_32_smp+0x164/0x168
irq event stamp: 18773830
hardirqs last enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10
hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10
softirqs last enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf
softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b
---[ end trace b7c64aa79e17954a ]---
After a bit of debugging, I found what was happening. This would trigger
when performing "perf" with a high NMI interrupt rate, while enabling and
disabling function tracer. Ftrace uses breakpoints to convert the nops at
the start of functions to calls to the function trampolines. The breakpoint
traps disable interrupts and this makes calls into lockdep via the
trace_hardirqs_off_thunk in the entry.S code. What happens is the following:
do_idle {
[interrupts enabled]
<interrupt> [interrupts disabled]
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET
test if pt_regs say return to interrupts enabled [yes]
TRACE_IRQS_ON [lockdep says irqs are on]
<nmi>
nmi_enter() {
printk_nmi_enter() [traced by ftrace]
[ hit ftrace breakpoint ]
<breakpoint exception>
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET [return from breakpoint]
test if pt_regs say interrupts enabled [no]
[iret back to interrupt]
[iret back to code]
tick_nohz_idle_enter() {
lockdep_assert_irqs_enabled() [lockdep say no!]
Although interrupts are indeed enabled, lockdep thinks it is not, and since
we now do asserts via lockdep, it gives a false warning. The issue here is
that printk_nmi_enter() is called before lockdep_off(), which disables
lockdep (for this reason) in NMIs. By simply not allowing ftrace to see
printk_nmi_enter() (via notrace annotation) we keep lockdep from getting
confused.
Cc: stable@vger.kernel.org Fixes: 42a0bb3f71383 ("printk/nmi: generic solution for safe printk in NMI") Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Ilya Dryomov [Wed, 22 Aug 2018 15:26:10 +0000 (17:26 +0200)]
rbd: support cloning across namespaces
If parent_get class method is not supported by the OSDs, fall back to
the legacy class method and assume that the parent is in the default
(i.e. "") namespace. The "use the child's image namespace" workaround
is no longer needed because creating images within namespaces will
require parent_get aware OSDs.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
projects / mirror_ubuntu-eoan-kernel.git / log