fbdev: amifb: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning.
Arnd Bergmann [Wed, 8 Nov 2023 14:58:13 +0000 (15:58 +0100)]
fbdev: hyperv_fb: fix uninitialized local variable use
When CONFIG_SYSFB is disabled, the hyperv_fb driver can now run into
undefined behavior on a gen2 VM, as indicated by this smatch warning:
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'base'.
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'size'.
Since there is no way to know the actual framebuffer in this configuration,
just return an allocation failure here, which should avoid the build
warning and the undefined behavior.
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202311070802.YCpvehaz-lkp@intel.com/ Fixes: a07b50d80ab6 ("hyperv: avoid dependency on screen_info") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/tfp410: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/opa362: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/hdmi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/dvi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/dpi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: atmel_lcdfb: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/dsi-cm: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/dpi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/analog-tv: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: atmel_lcdfb: Stop using platform_driver_probe()
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and also slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __refdata which
is needed to suppress a (W=1) modpost warning:
Dan Carpenter [Fri, 27 Oct 2023 12:05:44 +0000 (15:05 +0300)]
fbdev: imsttfb: fix a resource leak in probe
I've re-written the error handling but the bug is that if init_imstt()
fails we need to call iounmap(par->cmap_regs).
Fixes: c75f5a550610 ("fbdev: imsttfb: Fix use after free bug in imsttfb_probe") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Helge Deller <deller@gmx.de>
OMAP2_VRFB is a bool, so the vrfb driver can never be compiled as a
module. With that __exit_p(vrfb_remove) always evaluates to NULL and
vrfb_remove() is unused.
If the driver was compilable as a module, it would fail to build because
the type of vrfb_remove() isn't compatible with struct
platform_driver::remove(). (The former returns void, the latter int.)
Linus Torvalds [Mon, 6 Nov 2023 23:06:06 +0000 (15:06 -0800)]
Merge tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
Linus Torvalds [Mon, 6 Nov 2023 02:49:40 +0000 (18:49 -0800)]
Merge tag 'rtc-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is a new driver for the RTC of the Mstar SSD202D SoC. The
rtc7301 driver gains support for byte addresses to support the
USRobotics USR8200. Then we have many non user visible changes and
typo fixes.
Summary:
Subsytem:
- convert platform drivers to remove_new
- prevent modpost warnings for unremovable platform drivers
New driver:
- Mstar SSD202D
Drivers:
- brcmstb-waketimer: support level alarm_irq
- ep93xx: add DT support
- rtc7301: support byte-addressed IO"
* tag 'rtc-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits)
dt-bindings: rtc: Add Mstar SSD202D RTC
rtc: Add support for the SSD202D RTC
rtc: at91rm9200: annotate at91_rtc_remove with __exit again
dt-bindings: rtc: microcrystal,rv3032: Document wakeup-source property
dt-bindings: rtc: pcf8523: Convert to YAML
dt-bindings: rtc: mcp795: move to trivial-rtc
rtc: ep93xx: add DT support for Cirrus EP93xx
dt-bindings: rtc: Add Cirrus EP93xx
dt-bindings: rtc: pcf2123: convert to YAML
rtc: efi: fixed typo in efi_procfs()
rtc: omap: Use device_get_match_data()
rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call
rtc: rtc7301: Support byte-addressed IO
rtc: rtc7301: Rewrite bindings in schema
rtc: sh: Convert to platform remove callback returning void
rtc: pxa: Convert to platform remove callback returning void
rtc: mv: Convert to platform remove callback returning void
rtc: imxdi: Convert to platform remove callback returning void
rtc: at91rm9200: Convert to platform remove callback returning void
rtc: pcap: Drop no-op remove function
...
Linus Torvalds [Mon, 6 Nov 2023 02:45:32 +0000 (18:45 -0800)]
Merge tag 'mailbox-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- imx: add support for TX Doorbell v2
- mtk: implement runtime PM
- zynqmp: add destination mailbox compatible
- qcom:
- add another clock provider for IPQ
- add SM8650 compatible
- misc: use preferred device_get_match_data()
* tag 'mailbox-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
dt-bindings: mailbox: qcom-ipcc: document the SM8650 Inter-Processor Communication Controller
mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend
mailbox: Use device_get_match_data()
dt-bindings: zynqmp: add destination mailbox compatible
dt-bindings: mailbox: qcom: add one more clock provider for IPQ mailbox
mailbox: imx: support channel type tx doorbell v2
dt-bindings: mailbox: fsl,mu: add new tx doorbell channel
Linus Torvalds [Sun, 5 Nov 2023 19:02:32 +0000 (09:02 -1000)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost,virtio,vdpa: features, fixes, cleanups.
vdpa/mlx5:
- VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
- new maintainer
vdpa:
- support for vq descriptor mappings
- decouple reset of iotlb mapping from device reset
and fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vdpa_sim: implement .reset_map support
vdpa/mlx5: implement .reset_map driver op
vhost-vdpa: clean iotlb map during reset for older userspace
vdpa: introduce .compat_reset operation callback
vhost-vdpa: introduce IOTLB_PERSIST backend feature bit
vhost-vdpa: reset vendor specific mapping to initial state in .release
vdpa: introduce .reset_map operation callback
virtio_pci: add check for common cfg size
virtio-blk: fix implicit overflow on virtio_max_dma_size
virtio_pci: add build offset check for the new common cfg items
virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
vduse: make vduse_class constant
vhost-scsi: Spelling s/preceeding/preceding/g
virtio: kdoc for struct virtio_pci_modern_device
vdpa: Update sysfs ABI documentation
MAINTAINERS: Add myself as mlx5_vdpa driver
virtio-balloon: correct the comment of virtballoon_migratepage()
mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
vdpa/mlx5: Update cvq iotlb mapping on ASID change
vdpa/mlx5: Make iotlb helper functions more generic
...
Linus Torvalds [Sun, 5 Nov 2023 18:50:41 +0000 (08:50 -1000)]
Merge tag 'firewire-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire update from Takashi Sakamoto:
"A slight change for flexible length of array in core function.
Kees Cook provides a patch to annotate the array embedded in fw_node
structure referring to structure member for the length of array. The
annotation would be defined by future extension of C compilers, and
used for access bound-check at run-time enabled by UBSAN and
FORTIFY_SOURCE"
* tag 'firewire-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: Annotate struct fw_node with __counted_by
Linus Torvalds [Sun, 5 Nov 2023 18:41:14 +0000 (08:41 -1000)]
Merge tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has largely driver updates for 6.7, i.e. feature additions (like
adding transfers while in atomic mode), using new helpers (like
devm_clk_get_enabled), new IDs, documentation fixes and additions...
you name it.
The core got a memleak fix and better support for nested muxes"
* tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
i2c: s3c2410: make i2c_s3c_irq_nextbyte() void
i2c: qcom-geni: add ACPI device id for sc8180x
Documentation: i2c: add fault code for not supporting 10 bit addresses
i2c: sun6i-p2wi: Prevent potential division by zero
i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
i2c: i801: Use new helper acpi_use_parent_companion
ACPI: Add helper acpi_use_parent_companion
MAINTAINERS: add YAML file for i2c-demux-pinctrl
i2c: core: fix lockdep warning for sparsely nested adapter chain
i2c: axxia: eliminate kernel-doc warnings
dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
i2c: stm32f7: Use devm_clk_get_enabled()
i2c: stm32f4: Use devm_clk_get_enabled()
i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev
i2c: fix memleak in i2c_new_client_device()
i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
i2c: i801: Simplify class-based client device instantiation
i2c: exynos5: add support for atomic transfers
i2c: at91-core: Use devm_clk_get_enabled()
eeprom: at24: add ST M24C64-D Additional Write lockable page support
...
Linus Torvalds [Sun, 5 Nov 2023 18:28:32 +0000 (08:28 -1000)]
Merge tag 'ubifs-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- UBI Fastmap improvements
- Minor issues found by static analysis bots in both UBI and UBIFS
- Fix for wrong dentry length UBIFS in fscrypt mode
* tag 'ubifs-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: ubifs_link: Fix wrong name len calculating when UBIFS is encrypted
ubi: block: Fix use-after-free in ubiblock_cleanup
ubifs: fix possible dereference after free
ubi: fastmap: Add control in 'UBI_IOCATT' ioctl to reserve PEBs for filling pools
ubi: fastmap: Add module parameter to control reserving filling pool PEBs
ubi: fastmap: Fix lapsed wear leveling for first 64 PEBs
ubi: fastmap: Get wl PEB even ec beyonds the 'max' if free PEBs are run out
ubi: fastmap: may_reserve_for_fm: Don't reserve PEB if fm_anchor exists
ubi: fastmap: Remove unneeded break condition while filling pools
ubi: fastmap: Wait until there are enough free PEBs before filling pools
ubi: fastmap: Use free pebs reserved for bad block handling
ubi: Replace erase_block() with sync_erase()
ubi: fastmap: Allocate memory with GFP_NOFS in ubi_update_fastmap
ubi: fastmap: erase_block: Get erase counter from wl_entry rather than flash
ubi: fastmap: Fix missed ec updating after erasing old fastmap data block
ubifs: Fix missing error code err
ubifs: Fix memory leak of bud->log_hash
ubifs: Fix some kernel-doc comments
firewire: Annotate struct fw_node with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct fw_node.
Linus Torvalds [Sun, 5 Nov 2023 02:25:36 +0000 (16:25 -1000)]
Merge tag 'i3c/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"There are now more fixes because as stated in my previous pull
request, people now have access to actual hardware.
Core:
- handle IBI in the proper order
Drivers:
- cdns: fix status register access
- mipi-i3c-hci: many fixes now that the driver has been actually
tested
- svc: many IBI fixes, correct compatible string, fix hot join corner
cases"
* tag 'i3c/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (29 commits)
i3c: master: handle IBIs in order they came
i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.
i3c: master: svc: fix compatibility string mismatch with binding doc
i3c: master: svc: fix random hot join failure since timeout error
i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen
i3c: master: svc: fix check wrong status register in irq handler
i3c: master: svc: fix ibi may not return mandatory data byte
i3c: master: svc: fix wrong data return when IBI happen during start frame
i3c: master: svc: fix race condition in ibi work thread
i3c: Fix typo "Provisional ID" to "Provisioned ID"
i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs
i3c: mipi-i3c-hci: Resume controller after aborted transfer
i3c: mipi-i3c-hci: Resume controller explicitly
i3c: mipi-i3c-hci: Fix missing xfer->completion in hci_cmd_v1_daa()
i3c: mipi-i3c-hci: Do not unmap region not mapped for transfer
i3c: mipi-i3c-hci: Set number of SW enabled Ring Bundles earlier
i3c: mipi-i3c-hci: Fix race between bus cleanup and interrupt
i3c: mipi-i3c-hci: Set ring start request together with enable
i3c: mipi-i3c-hci: Remove BUG() when Ring Abort request times out
i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler
...
Linus Torvalds [Sun, 5 Nov 2023 02:20:36 +0000 (16:20 -1000)]
Merge tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"The main new functionality this time is work to allow Linux to
natively handle CXL link protocol errors signalled via PCIe AER for
current generation CXL platforms. This required some enlightenment of
the PCIe AER core to workaround the fact that current generation RCH
(Restricted CXL Host) platforms physically hide topology details and
registers via a mechanism called RCRB (Root Complex Register Block).
The next major highlight is reworks to address bugs in parsing region
configurations for next generation VH (Virtual Host) topologies. The
old broken algorithm is replaced with a simpler one that significantly
increases the number of region configurations supported by Linux. This
is again relevant for error handling so that forward and reverse
address translation of memory errors can be carried out by Linux for
memory regions instantiated by platform firmware.
As for other cross-tree work, the ACPI table parsing code has been
refactored for reuse parsing the "CDAT" structure which is an
ACPI-like data structure that is reported by CXL devices. That work is
in preparation for v6.8 support for CXL QoS. Think of this as dynamic
generation of NUMA node topology information generated by Linux rather
than platform firmware.
Lastly, a number of internal object lifetime issues have been resolved
along with misc. fixes and feature updates (decoders_committed sysfs
ABI).
Summary:
- Add support for RCH (Restricted CXL Host) Error recovery
- Fix several region assembly bugs
- Fix mem-device lifetime issues relative to the sanitize command and
RCH topology.
- Refactor ACPI table parsing for CDAT parsing re-use in preparation
for CXL QOS support"
* tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits)
lib/fw_table: Remove acpi_parse_entries_array() export
cxl/pci: Change CXL AER support check to use native AER
cxl/hdm: Remove broken error path
cxl/hdm: Fix && vs || bug
acpi: Move common tables helper functions to common lib
cxl: Add support for reading CXL switch CDAT table
cxl: Add checksum verification to CDAT from CXL
cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute
cxl: Add decoders_committed sysfs attribute to cxl_port
cxl: Add cxl_decoders_committed() helper
cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm
cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler
cxl/pci: Disable root port interrupts in RCH mode
cxl/pci: Add RCH downstream port error logging
cxl/pci: Map RCH downstream AER registers for logging protocol errors
cxl/pci: Update CXL error logging to use RAS register address
PCI/AER: Refactor cper_print_aer() for use by CXL driver module
cxl/pci: Add RCH downstream port AER register discovery
...
Linus Torvalds [Sun, 5 Nov 2023 01:58:13 +0000 (15:58 -1000)]
Merge tag 'tsm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux
Pull unified attestation reporting from Dan Williams:
"In an ideal world there would be a cross-vendor standard attestation
report format for confidential guests along with a common device
definition to act as the transport.
In the real world the situation ended up with multiple platform
vendors inventing their own attestation report formats with the
SEV-SNP implementation being a first mover to define a custom
sev-guest character device and corresponding ioctl(). Later, this
configfs-tsm proposal intercepted an attempt to add a tdx-guest
character device and a corresponding new ioctl(). It also anticipated
ARM and RISC-V showing up with more chardevs and more ioctls().
The proposal takes for granted that Linux tolerates the vendor report
format differentiation until a standard arrives. From talking with
folks involved, it sounds like that standardization work is unlikely
to resolve anytime soon. It also takes the position that kernfs ABIs
are easier to maintain than ioctl(). The result is a shared configfs
mechanism to return per-vendor report-blobs with the option to later
support a standard when that arrives.
Part of the goal here also is to get the community into the
"uncomfortable, but beneficial to the long term maintainability of the
kernel" state of talking to each other about their differentiation and
opportunities to collaborate. Think of this like the device-driver
equivalent of the common memory-management infrastructure for
confidential-computing being built up in KVM.
As for establishing an "upstream path for cross-vendor
confidential-computing device driver infrastructure" this is something
I want to discuss at Plumbers. At present, the multiple vendor
proposals for assigning devices to confidential computing VMs likely
needs a new dedicated repository and maintainer team, but that is a
discussion for v6.8.
For now, Greg and Thomas have acked this approach and this is passing
is AMD, Intel, and Google tests.
Summary:
- Introduce configfs-tsm as a shared ABI for confidential computing
attestation reports
- Convert sev-guest to additionally support configfs-tsm alongside
its vendor specific ioctl()
- Added signed attestation report retrieval to the tdx-guest driver
forgoing a new vendor specific ioctl()
- Misc cleanups and a new __free() annotation for kvfree()"
* tag 'tsm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux:
virt: tdx-guest: Add Quote generation support using TSM_REPORTS
virt: sevguest: Add TSM_REPORTS support for SNP_GET_EXT_REPORT
mm/slab: Add __free() support for kvfree
virt: sevguest: Prep for kernel internal get_ext_report()
configfs-tsm: Introduce a shared ABI for attestation reports
virt: coco: Add a coco/Makefile and coco/Kconfig
virt: sevguest: Fix passing a stack buffer as a scatterlist target
Linus Torvalds [Sat, 4 Nov 2023 21:04:30 +0000 (11:04 -1000)]
Merge tag 'mtd/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"The main set of changes is related to Uwe's work converting platform
remove callbacks to return void. Comes next (in number of changes)
Kees' additional structures annotations to improve the sanitizers. The
usual amount of cleanups apply.
About the more substancial contribution, one main function of the
partitions core could return an error which was not checked, this is
now fixed. On the bindings side, fixed partitions can now have a
compression property. Finally, an erroneous situation is now always
avoided in the MAP RAM driver.
CFI:
- A several years old byte swap has been fixed.
NAND:
- The subsystem has, as usual, seen a bit of cleanup being done this
cycle, typically return values of platform_get_irq() and
devm_kasprintf(). There is also a better ECC check in the Arasan
driver. This comes with smaller misc changes.
- In the SPI-NAND world there is now support for Foresee F35SQA002G,
Winbond W25N and XTX XT26 chips.
SPI NOR:
- For SPI NOR we cleaned the flash info entries in order to have them
slimmer and self explanatory. In order to make the entries as slim
as possible, we introduced sane default values so that the actual
flash entries don't need to specify them. We now use a flexible
macro to specify the flash ID instead of the previous INFOx()
macros that had hardcoded ID lengths.
- We also removed some flash entries: the very old Catalyst SPI
EEPROMs that were introduced once with the SPI-NOR subsystem, and a
Fujitsu MRAM. Both should use the at25 EEPROM driver. The latter
even has device tree bindings for the at25 driver.
- We made sure that the conversion didn't introduce any unwanted
changes by comparing the .rodata segment before and after the
conversion. The patches landed in linux-next immediately after
v6.6-rc2, we haven't seen any regressions yet.
- Apart of the autumn cleaning we introduced a new flash entry,
at25ff321a, and added block protection support for mt25qu512a"
* tag 'mtd/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (91 commits)
mtd: cfi_cmdset_0001: Byte swap OTP info
mtd: rawnand: meson: check return value of devm_kasprintf()
mtd: rawnand: intel: check return value of devm_kasprintf()
mtd: rawnand: sh_flctl: Convert to module_platform_driver()
mtd: spi-nor: micron-st: use SFDP table for mt25qu512a
mtd: spi-nor: micron-st: enable lock/unlock for mt25qu512a
mtd: rawnand: Remove unused of_gpio.h inclusion
mtd: spinand: Add support for XTX XT26xxxDxxxxx
mtd: spinand: winbond: add support for serial NAND flash
mtd: rawnand: cadence: Annotate struct cdns_nand_chip with __counted_by
mtd: rawnand: Annotate struct mtk_nfc_nand_chip with __counted_by
mtd: spinand: add support for FORESEE F35SQA002G
mtd: rawnand: rockchip: Use struct_size()
mtd: rawnand: arasan: Include ECC syndrome along with in-band data while checking for ECC failure
mtd: Use device_get_match_data()
mtd: spi-nor: nxp-spifi: Convert to platform remove callback returning void
mtd: spi-nor: hisi-sfc: Convert to platform remove callback returning void
mtd: maps: sun_uflash: Convert to platform remove callback returning void
mtd: maps: sa1100-flash: Convert to platform remove callback returning void
mtd: maps: pxa2xx-flash: Convert to platform remove callback returning void
...
Linus Torvalds [Sat, 4 Nov 2023 20:42:07 +0000 (10:42 -1000)]
Merge tag 'topic/nvidia-gsp-2023-11-03' of git://anongit.freedesktop.org/drm/drm
Pull drm nouveau GSP support from Dave Airlie:
"This adds the initial support for the NVIDIA GSP firmware to nouveau.
This firmware is a new direction for Turing+ GPUs, and is only enabled
by default on Ada generation. Other generations need to use
nouveau.config=NvGspRm=1
The GSP firmware takes nearly all the GPU init and power management
tasks onto a risc-v CPU on the GPU.
This series is mostly the work from Ben Skeggs, and Dave added some
patches to rebase it to the latest firmware release which is where we
will stay for as long as possible as the firmwares have no ABI
stability"
* tag 'topic/nvidia-gsp-2023-11-03' of git://anongit.freedesktop.org/drm/drm: (49 commits)
nouveau/gsp: add some basic registry entries.
nouveau/gsp: fix message signature.
nouveau/gsp: move to 535.113.01
nouveau/disp: fix post-gsp build on 32-bit arm.
nouveau: fix r535 build on 32-bit arm.
drm/nouveau/ofa/r535: initial support
drm/nouveau/nvjpg/r535: initial support
drm/nouveau/nvenc/r535: initial support
drm/nouveau/nvdec/r535: initial support
drm/nouveau/gr/r535: initial support
drm/nouveau/ce/r535: initial support
drm/nouveau/fifo/r535: initial support
drm/nouveau/disp/r535: initial support
drm/nouveau/mmu/r535: initial support
drm/nouveau/gsp/r535: add interrupt handling
drm/nouveau/gsp/r535: add support for rm alloc
drm/nouveau/gsp/r535: add support for rm control
drm/nouveau/gsp/r535: add support for booting GSP-RM
drm/nouveau/nvkm: support loading fws into sg_table
drm/nouveau/kms/tu102-: disable vbios parsing when running on RM
...
Linus Torvalds [Sat, 4 Nov 2023 19:26:23 +0000 (09:26 -1000)]
Merge tag 'f2fs-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we introduce a bigger page size support by changing the
internal f2fs's block size aligned to the page size. We also continue
to improve zoned block device support regarding the power off
recovery. As usual, there are some bug fixes regarding the error
handling routines in compression and ioctl.
Enhancements:
- Support Block Size == Page Size
- let f2fs_precache_extents() traverses in file range
- stop iterating f2fs_map_block if hole exists
- preload extent_cache for POSIX_FADV_WILLNEED
- compress: fix to avoid fragment w/ OPU during f2fs_ioc_compress_file()
Bug fixes:
- do not return EFSCORRUPTED, but try to run online repair
- finish previous checkpoints before returning from remount
- fix error handling of __get_node_page and __f2fs_build_free_nids
- clean up zones when not successfully unmounted
- fix to initialize map.m_pblk in f2fs_precache_extents()
- fix to drop meta_inode's page cache in f2fs_put_super()
- set the default compress_level on ioctl
- fix to avoid use-after-free on dic
- fix to avoid redundant compress extension
- do sanity check on cluster when CONFIG_F2FS_CHECK_FS is on
- fix deadloop in f2fs_write_cache_pages()"
* tag 'f2fs-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: finish previous checkpoints before returning from remount
f2fs: fix error handling of __get_node_page
f2fs: do not return EFSCORRUPTED, but try to run online repair
f2fs: fix error path of __f2fs_build_free_nids
f2fs: Clean up errors in segment.h
f2fs: clean up zones when not successfully unmounted
f2fs: let f2fs_precache_extents() traverses in file range
f2fs: avoid format-overflow warning
f2fs: fix to initialize map.m_pblk in f2fs_precache_extents()
f2fs: Support Block Size == Page Size
f2fs: stop iterating f2fs_map_block if hole exists
f2fs: preload extent_cache for POSIX_FADV_WILLNEED
f2fs: set the default compress_level on ioctl
f2fs: compress: fix to avoid fragment w/ OPU during f2fs_ioc_compress_file()
f2fs: fix to drop meta_inode's page cache in f2fs_put_super()
f2fs: split initial and dynamic conditions for extent_cache
f2fs: compress: fix to avoid redundant compress extension
f2fs: compress: do sanity check on cluster when CONFIG_F2FS_CHECK_FS is on
f2fs: compress: fix to avoid use-after-free on dic
f2fs: compress: fix deadloop in f2fs_write_cache_pages()
Linus Torvalds [Sat, 4 Nov 2023 19:20:04 +0000 (09:20 -1000)]
Merge tag '9p-for-6.7-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
A bunch of small fixes:
- three W=1 warning fixes: the NULL -> "" replacement isn't trivial
but is serialized identically by the protocol layer and has been
tested
- one syzbot/KCSAN datarace annotation where we don't care about
users messing with the fd they passed to mount -t 9p
- removing a declaration without implementation
- yet another race fix for trans_fd around connection close: the
'err' field is also used in potentially racy calls and this isn't
complete, but it's better than what we had
- and finally a theorical memory leak fix on serialization failure"
* tag '9p-for-6.7-rc1' of https://github.com/martinetd/linux:
9p/net: fix possible memory leak in p9_check_errors()
9p/fs: add MODULE_DESCRIPTION
9p/net: xen: fix false positive printf format overflow warning
9p: v9fs_listxattr: fix %s null argument warning
9p/trans_fd: Annotate data-racy writes to file::f_flags
fs/9p: Remove unused function declaration v9fs_inode2stat()
9p/trans_fd: avoid sending req to a cancelled conn
Linus Torvalds [Sat, 4 Nov 2023 19:13:50 +0000 (09:13 -1000)]
Merge tag '6.7-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- use after free fixes and deadlock fix
- symlink timestamp fix
- hashing perf improvement
- multichannel fixes
- minor debugging improvements
- fix creating fifos when using "sfu" mounts
- NTLMSSP authentication improvement
- minor fixes to include some missing create flags and structures from
recently updated protocol documentation
* tag '6.7-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: force interface update before a fresh session setup
cifs: do not reset chan_max if multichannel is not supported at mount
cifs: reconnect helper should set reconnect for the right channel
smb: client: fix use-after-free in smb2_query_info_compound()
smb: client: remove extra @chan_count check in __cifs_put_smb_ses()
cifs: add xid to query server interface call
cifs: print server capabilities in DebugData
smb: use crypto_shash_digest() in symlink_hash()
smb: client: fix use-after-free bug in cifs_debug_data_proc_show()
smb: client: fix potential deadlock when releasing mids
smb3: fix creating FIFOs when mounting with "sfu" mount option
Add definition for new smb3.1.1 command type
SMB3: clarify some of the unused CreateOption flags
cifs: Add client version details to NTLM authenticate message
smb3: fix touch -h of symlink
Linus Torvalds [Sat, 4 Nov 2023 18:46:37 +0000 (08:46 -1000)]
Merge tag 'x86_microcode_for_v6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislac Petkov:
"Major microcode loader restructuring, cleanup and improvements by
Thomas Gleixner:
- Restructure the code needed for it and add a temporary initrd
mapping on 32-bit so that the loader can access the microcode
blobs. This in itself is a preparation for the next major
improvement:
- Do not load microcode on 32-bit before paging has been enabled.
Handling this has caused an endless stream of headaches, issues,
ugly code and unnecessary hacks in the past. And there really
wasn't any sensible reason to do that in the first place. So switch
the 32-bit loading to happen after paging has been enabled and turn
the loader code "real purrty" again
- Drop mixed microcode steppings loading on Intel - there, a single
patch loaded on the whole system is sufficient
- Rework late loading to track which CPUs have updated microcode
successfully and which haven't, act accordingly
- Move late microcode loading on Intel in NMI context in order to
guarantee concurrent loading on all threads
- Make the late loading CPU-hotplug-safe and have the offlined
threads be woken up for the purpose of the update
- Add support for a minimum revision which determines whether late
microcode loading is safe on a machine and the microcode does not
change software visible features which the machine cannot use
anyway since feature detection has happened already. Roughly, the
minimum revision is the smallest revision number which must be
loaded currently on the system so that late updates can be allowed
- Other nice leanups, fixess, etc all over the place"
* tag 'x86_microcode_for_v6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
x86/microcode/intel: Add a minimum required revision for late loading
x86/microcode: Prepare for minimal revision check
x86/microcode: Handle "offline" CPUs correctly
x86/apic: Provide apic_force_nmi_on_cpu()
x86/microcode: Protect against instrumentation
x86/microcode: Rendezvous and load in NMI
x86/microcode: Replace the all-in-one rendevous handler
x86/microcode: Provide new control functions
x86/microcode: Add per CPU control field
x86/microcode: Add per CPU result state
x86/microcode: Sanitize __wait_for_cpus()
x86/microcode: Clarify the late load logic
x86/microcode: Handle "nosmt" correctly
x86/microcode: Clean up mc_cpu_down_prep()
x86/microcode: Get rid of the schedule work indirection
x86/microcode: Mop up early loading leftovers
x86/microcode/amd: Use cached microcode for AP load
x86/microcode/amd: Cache builtin/initrd microcode early
x86/microcode/amd: Cache builtin microcode too
x86/microcode/amd: Use correct per CPU ucode_cpu_info
...
Linus Torvalds [Sat, 4 Nov 2023 17:54:21 +0000 (07:54 -1000)]
Merge tag 'acpi-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix the acpi_thermal_add() error path that may do a double-free in
some cases after recent changes (Dan Carpenter)"
* tag 'acpi-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Fix acpi_thermal_unregister_thermal_zone() cleanup
Miquel Raynal [Sat, 4 Nov 2023 10:50:22 +0000 (11:50 +0100)]
Merge tag 'nand/for-6.7' into mtd/next
The raw NAND subsystem has, as usual, seen a bit of cleanup being done
this cycle, typically return values of platform_get_irq() and
devm_kasprintf(), plus structure annotations for sanitizers. There is
also a better ECC check in the Arasan driver. This comes with smaller
misc changes.
In the SPI-NAND world there is now support for Foresee F35SQA002G,
Winbond W25N and XTX XT26 chips.
Miquel Raynal [Sat, 4 Nov 2023 10:49:52 +0000 (11:49 +0100)]
Merge tag 'spi-nor/for-6.7' into mtd/next
For SPI NOR we cleaned the flash info entries in order to have
them slimmer and self explanatory. In order to make the entries
as slim as possible, we introduced sane default values so that
the actual flash entries don't need to specify them. We now use
a flexible macro to specify the flash ID instead of the previous
INFOx() macros that had hardcoded ID lengths.
We now use:
+ .id = SNOR_ID(0xef, 0x80, 0x20),
+ .name = "w25q512nwm",
+ .otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
We also removed some flash entries: the very old Catalyst
SPI EEPROMs that were introduced once with the SPI-NOR subsystem,
and a Fujitsu MRAM. Both should use the at25 EEPROM driver.
The latter even has device tree bindings for the at25 driver.
We made sure that the conversion didn't introduce any unwanted
changes by comparing the .rodata segment before and after the
conversion. The patches landed in linux-next immediately after
v6.6-rc2, we haven't seen any regressions yet.
Apart of the autumn cleaning we introduced a new flash entry,
at25ff321a, and added block protection support for mt25qu512a.
Linus Torvalds [Sat, 4 Nov 2023 05:15:19 +0000 (19:15 -1000)]
Merge tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No pin control core changes this time.
New drivers:
- Realtek RTD family pin control driver and RTD1619B, RTD1319D and
RTD1315E subdrivers
- Nuvoton NPCM8xx combined pin control and GPIO driver
- Amlogic T7 pin control driver
- Renesas RZ/G3S pin control driver
Improvements:
- A number of additional UART groups added to the Mediatek MT7981
driver
- MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660
- Extra GPIO banks for the Sunxi H616
- MLSP I2C6 function support in Qualcomm MSM8226
- Some __counted_by() annotations for dynamic arrays
- Ongoing work to make remove() return void
- LSBC groups and functions in the Renesas R8A7778"
* tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
pinctrl: Use device_get_match_data()
dt-bindings: pinctrl: qcom,sa8775p-tlmm: add missing wakeup-parent
dt-bindings: pinctrl: nuvoton,npcm845: Add missing additionalProperties on gpio child nodes
dt-bindings: pinctrl: brcm: Ensure all child node properties are documented
pinctrl: renesas: rzn1: Convert to platform remove callback returning void
pinctrl: renesas: rzg2l: Add RZ/G3S support
dt-bindings: pinctrl: renesas: Document RZ/G3S SoC
pinctrl: renesas: rzg2l: Add support for different DS values on different groups
pinctrl: renesas: rzg2l: Move DS and OI to SoC-specific configuration
pinctrl: renesas: rzg2l: Adapt function number for RZ/G3S
pinctrl: renesas: rzg2l: Adapt for different SD/PWPR register offsets
pinctrl: renesas: rzg2l: Index all registers based on port offset
pinctrl: renesas: rzg2l: Add validation of GPIO pin in rzg2l_gpio_request()
pinctrl: renesas: r8a7778: Add LBSC pins, groups, and functions
pinctrl: intel: fetch community only when we need it
pinctrl: cherryview: reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
pinctrl: cherryview: Convert to platform remove callback returning void
pinctrl: sprd-sc9860: Convert to platform remove callback returning void
pinctrl: qcom/msm: Convert to platform remove callback returning void
pinctrl: qcom/lpi: Convert to platform remove callback returning void
...
Linus Torvalds [Sat, 4 Nov 2023 05:10:41 +0000 (19:10 -1000)]
Merge tag 'soundwire-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Core now has improved handling of errors for clock stop
- Support for qcom v2.0.0 status registers and command ignored
interrupt and more logging for failures
- DMI quirk for HP Omen machine
* tag 'soundwire-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: dmi-quirks: update HP Omen match
soundwire: bus: improve error handling for clock stop prepare/deprepare
soundwire: qcom: Log clk_get("iface") failures
soundwire: qcom: handle command ignored interrupt
soundwire: qcom: use newer link status tregister on v2.0.0
Linus Torvalds [Sat, 4 Nov 2023 02:00:42 +0000 (16:00 -1000)]
Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
Linus Torvalds [Sat, 4 Nov 2023 01:44:25 +0000 (15:44 -1000)]
Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
Linus Torvalds [Sat, 4 Nov 2023 01:31:04 +0000 (15:31 -1000)]
Merge tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 6.7-rc1. A bit
bigger than 6.6 this time around, as it coincided with the Outreachy
and mentorship application process, so we got a bunch of new
developers sending in their first changes, which is nice to see.
Also in here is a removal of the qlge ethernet driver, and the
rtl8192u wireless driver. Both of these were very old and no one was
maintaining them, the wireless driver removal was due to no one using
it anymore, and no hardware to be found, and is part of a larger
effort to remove unused and old wifi drivers from the system.
The qlge ethernet driver did have one user pop up after it was
dropped, and we are working with the network mainainers to figure out
what tree it will come back in from and who will be responsible for
it, and if it really is being used or not. Odds are it will show up in
a network subsystem pull request after -rc1 is out, but we aren't sure
yet.
Other smaller changes in here are:
- Lots of vc04_services work by Umang to clean up the mess created by
the rpi developers long ago, bringing it almost into good enough
shape to get out of staging, hopefully next major release, it's
getting close.
- rtl8192e variable cleanups and removal of unused code and
structures
- vme_user coding style cleanups
- other small coding style cleanups to lots of the staging drivers
- octeon typedef removals, and then last-minute revert when it was
found to break the build in some configurations (it's a hard driver
to build properly, none of the normal automated testing catches
it.)
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (256 commits)
Revert "staging: octeon: remove typedef in enum cvmx_spi_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_helper_interface_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_pow_wait_t"
Revert "staging: octeon: remove typedef in struct cvmx_pko_lock_t"
Revert "staging: octeon: remove typedef in enum cvmx_pko_status_t"
Revert "staging: octeon: remove typedef in structs cvmx_pip_port_status_t and cvmx_pko_port_status_t"
staging: vt6655: Type encoding info dropped from variable name "byRxRate"
staging: vt6655: Type encoding info dropped from function name "CARDbUpdateTSF"
staging: vt6655: Type encoding info dropped from function name "CARDvSetRSPINF"
staging: vt6655: Type encoding info dropped from function name "CARDbyGetPktType"
staging: vt6655: Type encoding info dropped from variable name "byPacketType"
staging: vt6655: Type encoding info dropped from function name "CARDbSetPhyParameter"
staging: vt6655: Type encoding info dropped from variable name "pbyRsvTime"
staging: vt6655: Type encoding info dropped from variable name "pbyTxRate"
staging: vt6655: Type encoding info dropped from function name "s_vCalculateOFDMRParameter"
staging: vt6655: Type encoding info dropped from array name "cwRXBCNTSFOff"
staging: fbtft: Convert to platform remove callback returning void
staging: olpc_dcon: Remove I2C_CLASS_DDC support
staging: vc04_services: use snprintf instead of sprintf
staging: rtl8192e: Fix line break issue at priv->rx_buf[priv->rx_idx]
...
Linus Torvalds [Sat, 4 Nov 2023 01:15:47 +0000 (15:15 -1000)]
Merge tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core updates for 6.7-rc1. Nothing major in
here at all, just a small number of changes including:
- minor cleanups and updates from Andy Shevchenko
- __counted_by addition
- firmware_loader update for aborting loads cleaner
- other minor changes, details in the shortlog
- documentation update
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
firmware_loader: Abort all upcoming firmware load request once reboot triggered
firmware_loader: Refactor kill_pending_fw_fallback_reqs()
Documentation: security-bugs.rst: linux-distros relaxed their rules
driver core: Release all resources during unbind before updating device links
driver core: class: remove boilerplate code
driver core: platform: Annotate struct irq_affinity_devres with __counted_by
resource: Constify resource crosscheck APIs
resource: Unify next_resource() and next_resource_skip_children()
resource: Reuse for_each_resource() macro
PCI: Implement custom llseek for sysfs resource entries
kernfs: sysfs: support custom llseek method for sysfs entries
debugfs: Fix __rcu type comparison warning
device property: Replace custom implementation of COUNT_ARGS()
drivers: base: test: Make property entry API test modular
driver core: Add missing parameter description to __fwnode_link_add()
device property: Clarify usage scope of some struct fwnode_handle members
devres: rename the first parameter of devm_add_action(_or_reset)
driver core: platform: Unify the firmware node type check
driver core: platform: Use temporary variable in platform_device_add()
driver core: platform: Refactor error path in a couple places
...
Linus Torvalds [Sat, 4 Nov 2023 00:51:08 +0000 (14:51 -1000)]
Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
IBI shall be handled in order they appear on the bus. Otherwise could hit
case when order of handling them in device driver will be different. It may
lead to invalid assembling fragmented packets or events order broken.
Added separate workqueue with option WQ_MEM_RECLAIM for each device driver.
This ensures IBI handling order and improves IBI handling performance: IBI
handlers for device B are not blocked by IBI handlers for device A.
Original solution (single workqueue in main driver) was able to handle also
general IBI (not related to specific device) like HJ or MR. So leaving this
for such purposes.
Billy Tsai [Mon, 23 Oct 2023 08:02:37 +0000 (16:02 +0800)]
i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.
The `i3c_master_bus_init` function may attach the I2C devices before the
I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used
before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails,
the DAT `cleanup` will execute before the device is detached, which will
execue DAT `free_entry` function. The above scenario can cause the driver
to use DAT_data when it is NULL.
Linus Torvalds [Fri, 3 Nov 2023 20:17:22 +0000 (10:17 -1000)]
Merge tag 's390-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Get rid of private VM_FAULT flags
- Add word-at-a-time implementation
- Add DCACHE_WORD_ACCESS support
- Cleanup control register handling
- Disallow CPU hotplug of CPU 0 to simplify its handling complexity,
following a similar restriction in x86
- Optimize pai crypto map allocation
- Update the list of crypto express EP11 coprocessor operation modes
- Fixes and improvements for secure guests AP pass-through
- Several fixes to address incorrect page marking for address
translation with the "cmma no-dat" feature, preventing potential
incorrect guest TLB flushes
- Fix early IPI handling
- Several virtual vs physical address confusion fixes
- Various small fixes and improvements all over the code
* tag 's390-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits)
s390/cio: replace deprecated strncpy with strscpy
s390/sclp: replace deprecated strncpy with strtomem
s390/cio: fix virtual vs physical address confusion
s390/cio: export CMG value as decimal
s390: delete the unused store_prefix() function
s390/cmma: fix handling of swapper_pg_dir and invalid_pg_dir
s390/cmma: fix detection of DAT pages
s390/sclp: handle default case in sclp memory notifier
s390/pai_crypto: remove per-cpu variable assignement in event initialization
s390/pai: initialize event count once at initialization
s390/pai_crypto: use PERF_ATTACH_TASK define for per task detection
s390/mm: add missing arch_set_page_dat() call to gmap allocations
s390/mm: add missing arch_set_page_dat() call to vmem_crst_alloc()
s390/cmma: fix initial kernel address space page table walk
s390/diag: add missing virt_to_phys() translation to diag224()
s390/mm,fault: move VM_FAULT_ERROR handling to do_exception()
s390/mm,fault: remove VM_FAULT_BADMAP and VM_FAULT_BADACCESS
s390/mm,fault: remove VM_FAULT_SIGNAL
s390/mm,fault: remove VM_FAULT_BADCONTEXT
s390/mm,fault: simplify kfence fault handling
...
Linus Torvalds [Fri, 3 Nov 2023 20:07:39 +0000 (10:07 -1000)]
Merge tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for KVM running as a nested hypervisor under development
versions of PowerVM, using the new PAPR nested virtualisation API
- Add support for the BPF prog pack allocator
- A rework of the non-server MMU handling to support execute-only on
all platforms
- Some optimisations & cleanups for the powerpc qspinlock code
- Various other small features and fixes
Thanks to Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin
Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael
Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin,
Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant,
Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav
Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, and Yuan Tan.
* tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (100 commits)
powerpc/vmcore: Add MMU information to vmcoreinfo
Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo"
powerpc/bpf: use bpf_jit_binary_pack_[alloc|finalize|free]
powerpc/bpf: rename powerpc64_jit_data to powerpc_jit_data
powerpc/bpf: implement bpf_arch_text_invalidate for bpf_prog_pack
powerpc/bpf: implement bpf_arch_text_copy
powerpc/code-patching: introduce patch_instructions()
powerpc/32s: Implement local_flush_tlb_page_psize()
powerpc/pseries: use kfree_sensitive() in plpks_gen_password()
powerpc/code-patching: Perform hwsync in __patch_instruction() in case of failure
powerpc/fsl_msi: Use device_get_match_data()
powerpc: Remove cpm_dp...() macros
powerpc/qspinlock: Rename yield_propagate_owner tunable
powerpc/qspinlock: Propagate sleepy if previous waiter is preempted
powerpc/qspinlock: don't propagate the not-sleepy state
powerpc/qspinlock: propagate owner preemptedness rather than CPU number
powerpc/qspinlock: stop queued waiters trying to set lock sleepy
powerpc/perf: Fix disabling BHRB and instruction sampling
powerpc/trace: Add support for HAVE_FUNCTION_ARG_ACCESS_API
powerpc/tools: Pass -mabi=elfv2 to gcc-check-mprofile-kernel.sh
...
Linus Torvalds [Fri, 3 Nov 2023 19:48:17 +0000 (09:48 -1000)]
Merge tag 'apparmor-pr-2023-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"This adds initial support for mediating io_uring and userns creation.
Adds a new restriction that tightens the use of change_profile, and a
couple of optimizations to reduce performance bottle necks that have
been found when retrieving the current task's secid and allocating
work buffers.
The majority of the patch set continues cleaning up and simplifying
the code (fixing comments, removing now dead functions, and macros
etc). Finally there are 4 bug fixes, with the regression fix having
had a couple months of testing.
Features:
- optimize retrieving current task secid
- add base io_uring mediation
- add base userns mediation
- improve buffer allocation
- allow restricting unprivilege change_profile
Cleanups:
- Fix kernel doc comments
- remove unused declarations
- remove unused functions
- remove unneeded #ifdef
- remove unused macros
- mark fns static
- cleanup fn with unused return values
- cleanup audit data
- pass cred through to audit data
- refcount the pdb instead of using duplicates
- make SK_CTX macro an inline fn
- some comment cleanups
Bug fixes:
- fix regression in mount mediation
- fix invalid refenece
- use passed in gfp flags
- advertise avaiability of extended perms and disconnected.path"
* tag 'apparmor-pr-2023-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (39 commits)
apparmor: Fix some kernel-doc comments
apparmor: Fix one kernel-doc comment
apparmor: Fix some kernel-doc comments
apparmor: mark new functions static
apparmor: Fix regression in mount mediation
apparmor: cache buffers on percpu list if there is lock contention
apparmor: add io_uring mediation
apparmor: add user namespace creation mediation
apparmor: allow restricting unprivileged change_profile
apparmor: advertise disconnected.path is available
apparmor: refcount the pdb
apparmor: provide separate audit messages for file and policy checks
apparmor: pass cred through to audit info.
apparmor: rename audit_data->label to audit_data->subj_label
apparmor: combine common_audit_data and apparmor_audit_data
apparmor: rename SK_CTX() to aa_sock and make it an inline fn
apparmor: Optimize retrieving current task secid
apparmor: remove unused functions in policy_ns.c/.h
apparmor: remove unneeded #ifdef in decompress_zstd()
apparmor: fix invalid reference on profile->disconnected
...
Linus Torvalds [Fri, 3 Nov 2023 19:28:53 +0000 (09:28 -1000)]
Merge tag 'landlock-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"A Landlock ruleset can now handle two new access rights:
LANDLOCK_ACCESS_NET_BIND_TCP and LANDLOCK_ACCESS_NET_CONNECT_TCP. When
handled, the related actions are denied unless explicitly allowed by a
Landlock network rule for a specific port.
The related patch series has been reviewed for almost two years, it
has evolved a lot and we now have reached a decent design, code and
testing. The refactored kernel code and the new test helpers also
bring the foundation to support more network protocols.
Test coverage for security/landlock is 92.4% of 710 lines according to
gcc/gcov-13, and it was 93.1% of 597 lines before this series. The
decrease in coverage is due to code refactoring to make the ruleset
management more generic (i.e. dealing with inodes and ports) that also
added new WARN_ON_ONCE() checks not possible to test from user space.
syzkaller has been updated accordingly [4], and such patched instance
(tailored to Landlock) has been running for a month, covering all the
new network-related code [5]"
BIT 20: TIMEOUT error
The module has stalled too long in a frame. This happens when:
- The TX FIFO or RX FIFO is not handled and the bus is stuck in the
middle of a message,
- No STOP was issued and between messages,
- IBI manual is used and no decision was made.
The maximum stall period is 100 μs.
This can be considered as being just a warning as the system IRQ latency
can easily be greater than 100us.
Upon IBIWON timeout, the SDA line will always be kept low if we don't emit
a stop. Calling svc_i3c_master_emit_stop() there will let the bus return to
idle state.
Frank Li [Mon, 23 Oct 2023 16:16:55 +0000 (12:16 -0400)]
i3c: master: svc: fix ibi may not return mandatory data byte
MSTATUS[RXPEND] is only updated after the data transfer cycle started. This
creates an issue when the I3C clock is slow, and the CPU is running fast
enough that MSTATUS[RXPEND] may not be updated when the code reaches
checking point. As a result, mandatory data can be missed.
Add a wait for MSTATUS[COMPLETE] to ensure that all mandatory data is
already in FIFO. It also works without mandatory data.
If an In-Band Interrupt (IBI) occurs and IBI work thread is not immediately
scheduled, when svc_i3c_master_priv_xfers() initiates the I3C transfer and
attempts to send address 0x7e, the target interprets it as an
IBI handler and returns the target address 0x0a.
However, svc_i3c_master_priv_xfers() does not handle this case and proceeds
with other transfers, resulting in incorrect data being returned.
Add IBIWON check in svc_i3c_master_xfer(). In case this situation occurs,
return a failure to the driver.
Frank Li [Mon, 23 Oct 2023 16:16:53 +0000 (12:16 -0400)]
i3c: master: svc: fix race condition in ibi work thread
The ibi work thread operates asynchronously with other transfers, such as
svc_i3c_master_priv_xfers(). Introduce mutex protection to ensure the
completion of the entire i3c/i2c transaction.
Linus Torvalds [Fri, 3 Nov 2023 18:17:38 +0000 (08:17 -1000)]
Merge tag 'perf-tools-for-v6.7-1-2023-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Build:
- Compile BPF programs by default if clang (>= 12.0.1) is available
to enable more features like kernel lock contention, off-cpu
profiling, kwork, sample filtering and so on.
This can be disabled by passing BUILD_BPF_SKEL=0 to make.
- Produce better error messages for bison on debug build (make
DEBUG=1) by defining YYDEBUG symbol internally.
perf record:
- Track sideband events (like FORK/MMAP) from all CPUs even if perf
record targets a subset of CPUs only (using -C option). Otherwise
it may lose some information happened on a CPU out of the target
list.
- Fix checking raw sched_switch tracepoint argument using system BTF.
This affects off-cpu profiling which attaches a BPF program to the
raw tracepoint.
perf lock contention:
- Add --lock-cgroup option to see contention by cgroups. This should
be used with BPF only (using -b option).
$ sudo perf lock con -ab --lock-cgroup -- sleep 1
contended total wait max wait avg wait cgroup
835 14.06 ms 41.19 us 16.83 us /system.slice/led.service
25 122.38 us 13.77 us 4.89 us /
44 23.73 us 3.87 us 539 ns /user.slice/user-657345.slice/session-c4.scope
1 491 ns 491 ns 491 ns /system.slice/connectd.service
- Add -G/--cgroup-filter option to see contention only for given
cgroups.
This can be useful when you identified a cgroup in the above
command and want to investigate more on it. It also works with
other output options like -t/--threads and -l/--lock-addr.
$ sudo perf lock con -ab -G /user.slice/user-657345.slice/session-c4.scope -- sleep 1
contended total wait max wait avg wait type caller
8 77.11 us 17.98 us 9.64 us spinlock futex_wake+0xc8
2 24.56 us 14.66 us 12.28 us spinlock tick_do_update_jiffies64+0x25
1 4.97 us 4.97 us 4.97 us spinlock futex_q_lock+0x2a
- Use per-cpu array for better spinlock tracking. This is to improve
performance of the BPF program and to avoid nested contention on a
lock in the BPF hash map.
- Update callstack check for PowerPC. To find a representative caller
of a lock, it needs to look up the call stacks. It ends the lookup
when it sees 0 in the call stack buffer. However, PowerPC call
stacks can have 0 values in the beginning so skip them when it
expects valid call stacks after.
perf kwork:
- Support 'sched' class (for -k option) so that it can see task
scheduling event (using sched_switch tracepoint) as well as irq and
workqueue items.
- Add perf kwork top subcommand to show more accurate cpu utilization
with sched class above. It works both with a recorded data (using
perf kwork record command) and BPF (using -b option). Unlike perf
top command, it does not support interactive mode (yet).
$ sudo perf kwork top -b -k sched
Starting trace, Hit <Ctrl+C> to stop and report
^C
Total : 160702.425 ms, 8 cpus
%Cpu(s): 36.00% id, 0.00% hi, 0.00% si
%Cpu0 [|||||||||||||||||| 61.66%]
%Cpu1 [|||||||||||||||||| 61.27%]
%Cpu2 [||||||||||||||||||| 66.40%]
%Cpu3 [|||||||||||||||||| 61.28%]
%Cpu4 [|||||||||||||||||| 61.82%]
%Cpu5 [||||||||||||||||||||||| 77.41%]
%Cpu6 [|||||||||||||||||| 61.73%]
%Cpu7 [|||||||||||||||||| 63.25%]
PID SPID %CPU RUNTIME COMMMAND
-------------------------------------------------------------
0 0 38.72 8089.463 ms [swapper/1]
0 0 38.71 8084.547 ms [swapper/3]
0 0 38.33 8007.532 ms [swapper/0]
0 0 38.26 7992.985 ms [swapper/6]
0 0 38.17 7971.865 ms [swapper/4]
0 0 36.74 7447.765 ms [swapper/7]
0 0 33.59 6486.942 ms [swapper/2]
0 0 22.58 3771.268 ms [swapper/5]
9545 9351 2.48 447.136 ms sched-messaging
9574 9351 2.09 418.583 ms sched-messaging
9724 9351 2.05 372.407 ms sched-messaging
9531 9351 2.01 368.804 ms sched-messaging
9512 9351 2.00 362.250 ms sched-messaging
9514 9351 1.95 357.767 ms sched-messaging
9538 9351 1.86 384.476 ms sched-messaging
9712 9351 1.84 386.490 ms sched-messaging
9723 9351 1.83 380.021 ms sched-messaging
9722 9351 1.82 382.738 ms sched-messaging
9517 9351 1.81 354.794 ms sched-messaging
9559 9351 1.79 344.305 ms sched-messaging
9725 9351 1.77 365.315 ms sched-messaging
<SNIP>
- Add hard/soft-irq statistics to perf kwork top. This will show the
total CPU utilization with IRQ stats like below:
$ sudo perf kwork top -b -k sched,irq,softirq
Starting trace, Hit <Ctrl+C> to stop and report
^C
Total : 12554.889 ms, 8 cpus
%Cpu(s): 96.23% id, 0.10% hi, 0.19% si <---- here
%Cpu0 [| 4.60%]
%Cpu1 [| 4.59%]
%Cpu2 [ 2.73%]
%Cpu3 [| 3.81%]
<SNIP>
perf bench:
- Add -G/--cgroups option to perf bench sched pipe. The pipe bench is
good to measure context switch overhead. With this option, it puts
the reader and writer tasks in separate cgroups to enforce context
switch between two different cgroups.
Also it needs to set CPU affinity of the tasks in a CPU to
accurately measure the impact of cgroup context switches.
$ sudo perf stat -e context-switches,cgroup-switches -- \
> taskset -c 0 perf bench sched pipe -l 100000
# Running 'sched/pipe' benchmark:
# Executed 100000 pipe operations between two processes
Now context-switches and cgroup-switches are almost same. And you
can see the pipe operation took little more.
- Kill child processes when perf bench sched messaging exited
abnormally. Otherwise it'd leave the child doing unnecessary work.
perf test:
- Fix various shellcheck issues on the tests written in shell script.
- Skip tests when condition is not satisfied:
- object code reading test for non-text section addresses.
- CoreSight test if cs_etm// event is not available.
- lock contention test if not enough CPUs.
Event parsing:
- Make PMU alias name loading lazy to reduce the startup time in the
event parsing code for perf record, stat and others in the general
case.
- Lazily compute PMU default config. In the same sense, delay PMU
initialization until it's really needed to reduce the startup cost.
- Fix event term values that are raw events. The event specification
can have several terms including event name. But sometimes it
clashes with raw event encoding which starts with 'r' and has
hex-digits.
For example, an event named 'read' should be processed as a normal
event but it was mis-treated as a raw encoding and caused a
failure.
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
event syntax error: '..nning/event=read/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Event metrics:
- Add "Compat" regex to match event with multiple identifiers.
- Usual updates for Intel, Power10, Arm telemetry/CMN and AmpereOne.
Misc:
- Assorted memory leak fixes and footprint reduction.
- Add "bpf_skeletons" to perf version --build-options so that users
can check whether their perf tools have BPF support easily.
- Fix unaligned access in Intel-PT packet decoder found by
undefined-behavior sanitizer.
- Avoid frequency mode for the dummy event. Surprisingly it'd impact
kernel timer tick handler performance by force iterating all PMU
events.
- Update bash shell completion for events and metrics"
* tag 'perf-tools-for-v6.7-1-2023-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (187 commits)
perf vendor events intel: Update tsx_cycles_per_elision metrics
perf vendor events intel: Update bonnell version number to v5
perf vendor events intel: Update westmereex events to v4
perf vendor events intel: Update meteorlake events to v1.06
perf vendor events intel: Update knightslanding events to v16
perf vendor events intel: Add typo fix for ivybridge FP
perf vendor events intel: Update a spelling in haswell/haswellx
perf vendor events intel: Update emeraldrapids to v1.01
perf vendor events intel: Update alderlake/alderlake events to v1.23
perf build: Disable BPF skeletons if clang version is < 12.0.1
perf callchain: Fix spelling mistake "statisitcs" -> "statistics"
perf report: Fix spelling mistake "heirachy" -> "hierarchy"
perf python: Fix binding linkage due to rename and move of evsel__increase_rlimit()
perf tests: test_arm_coresight: Simplify source iteration
perf vendor events intel: Add tigerlake two metrics
perf vendor events intel: Add broadwellde two metrics
perf vendor events intel: Fix broadwellde tma_info_system_dram_bw_use metric
perf mem_info: Add and use map_symbol__exit and addr_map_symbol__exit
perf callchain: Minor layout changes to callchain_list
perf callchain: Make brtype_stat in callchain_list optional
...
Linus Torvalds [Fri, 3 Nov 2023 17:41:18 +0000 (07:41 -1000)]
Merge tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Remove eventfs_file descriptor
This is the biggest change, and the second part of making eventfs
create its files dynamically.
In 6.6 the first part was added, and that maintained a one to one
mapping between eventfs meta descriptors and the directories and file
inodes and dentries that were dynamically created. The directories
were represented by a eventfs_inode and the files were represented by
a eventfs_file.
In v6.7 the eventfs_file is removed. As all events have the same
directory make up (sched_switch has an "enable", "id", "format", etc
files), the handing of what files are underneath each leaf eventfs
directory is moved back to the tracing subsystem via a callback.
When an event is added to the eventfs, it registers an array of
evenfs_entry's. These hold the names of the files and the callbacks
to call when the file is referenced. The callback gets the name so
that the same callback may be used by multiple files. The callback
then supplies the filesystem_operations structure needed to create
this file.
This has brought the memory footprint of creating multiple eventfs
instances down by 2 megs each!
- User events now has persistent events that are not associated to a
single processes. These are privileged events that hang around even
if no process is attached to them
- Clean up of seq_buf
There's talk about using seq_buf more to replace strscpy() and
friends. But this also requires some minor modifications of seq_buf
to be able to do this
- Expand instance ring buffers individually
Currently if boot up creates an instance, and a trace event is
enabled on that instance, the ring buffer for that instance and the
top level ring buffer are expanded (1.4 MB per CPU). This wastes
memory as this happens when nothing is using the top level instance
- Other minor clean ups and fixes
* tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
seq_buf: Export seq_buf_puts()
seq_buf: Export seq_buf_putc()
eventfs: Use simple_recursive_removal() to clean up dentries
eventfs: Remove special processing of dput() of events directory
eventfs: Delete eventfs_inode when the last dentry is freed
eventfs: Hold eventfs_mutex when calling callback functions
eventfs: Save ownership and mode
eventfs: Test for ei->is_freed when accessing ei->dentry
eventfs: Have a free_ei() that just frees the eventfs_inode
eventfs: Remove "is_freed" union with rcu head
eventfs: Fix kerneldoc of eventfs_remove_rec()
tracing: Have the user copy of synthetic event address use correct context
eventfs: Remove extra dget() in eventfs_create_events_dir()
tracing: Have trace_event_file have ref counters
seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str()
eventfs: Fix typo in eventfs_inode union comment
eventfs: Fix WARN_ON() in create_file_dentry()
powerpc: Remove initialisation of readpos
tracing/histograms: Simplify last_cmd_set()
seq_buf: fix a misleading comment
...
Linus Torvalds [Fri, 3 Nov 2023 17:29:54 +0000 (07:29 -1000)]
Merge tag 'trace-tools-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
"RTLA:
- In rtla/utils.c, initialize the 'found' variable to avoid garbage
when a mount point is not found.
Verification:
- Remove duplicated imports on dot2k python script"
* tag 'trace-tools-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla: Fix uninitialized variable found
verification/dot2k: Delete duplicate imports
Linus Torvalds [Fri, 3 Nov 2023 17:24:22 +0000 (07:24 -1000)]
Merge tag 'printk-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Another preparation step for introducing printk kthreads. The main
piece is a per-console lock with several features:
- Support three priorities: normal, emergency, and panic. They will
be defined by a context where the lock is taken. A context with a
higher priority is allowed to take over the lock from a context
with a lower one.
The plan is to use the emergency context for Oops and WARN()
messages, and also by watchdogs.
The panic() context will be used on panic CPU.
- The owner might enter/exit regions where it is not safe to take
over the lock. It allows the take over the lock a safe way in the
middle of a message.
For example, serial drivers emit characters one by one. And the
serial port is in a safe state in between.
Only the final console_flush_in_panic() will be allowed to take
over the lock even in the unsafe state (last chance, pray, and
hope).
- A higher priority context might busy wait with a timeout. The
current owner is informed about the waiter and releases the lock
on exit from the unsafe state.
- The new lock is safe even in atomic contexts, including NMI.
Another change is a safe manipulation of per-console sequence number
counter under the new lock.
- simple_strntoull() micro-optimization
- Reduce pr_flush() pooling time.
- Calm down false warning about possible buffer invalid access to
console buffers when CONFIG_PRINTK is disabled.
[ .. and Thomas Gleixner wants to point out that while several of the
commits are attributed to him, he only authored the early versions of
said commits, and that John Ogness and Petr Mladek have been the ones
who sorted out the details and really should be those who get the
credit - Linus ]
* tag 'printk-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsprintf: uninline simple_strntoull(), reorder arguments
printk: printk: Remove unnecessary statements＇len = 0;＇
printk: Reduce pr_flush() pooling time
printk: fix illegal pbufs access for !CONFIG_PRINTK
printk: nbcon: Allow drivers to mark unsafe regions and check state
printk: nbcon: Add emit function and callback function for atomic printing
printk: nbcon: Add sequence handling
printk: nbcon: Add ownership state functions
printk: nbcon: Add buffer management
printk: Make static printk buffers available to nbcon
printk: nbcon: Add acquire/release logic
printk: Add non-BKL (nbcon) console basic infrastructure
Linus Torvalds [Fri, 3 Nov 2023 17:21:54 +0000 (07:21 -1000)]
Merge tag 'livepatching-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- Add missing newline character to avoid waiting for a continuous
message
* tag 'livepatching-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Fix missing newline character in klp_resolve_symbols()
Linus Torvalds [Fri, 3 Nov 2023 17:08:36 +0000 (07:08 -1000)]
Merge tag 'bitmap-for-6.7' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
"This includes the 'bitmap: cleanup bitmap_*_region() implementation'
series, and scattered cleanup patches"
* tag 'bitmap-for-6.7' of https://github.com/norov/linux:
buildid: reduce header file dependencies for module
bitmap: move bitmap_*_region() functions to bitmap.h
bitmap: drop _reg_op() function
bitmap: replace _reg_op(REG_OP_ISFREE) with find_next_bit()
bitmap: replace _reg_op(REG_OP_RELEASE) with bitmap_clear()
bitmap: replace _reg_op(REG_OP_ALLOC) with bitmap_set()
bitmap: fix opencoded bitmap_allocate_region()
bitmap: add test for bitmap_*_region() functions
bitmap: align __reg_op() wrappers with modern coding style
lib/bitmap: split-out string-related operations to a separate files
bitmap: Remove dead code, i.e. bitmap_copy_le()
bitmap: Fix a typo ("identify map")
cpumask: kernel-doc cleanups and additions
Linus Torvalds [Fri, 3 Nov 2023 06:53:31 +0000 (20:53 -1000)]
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
Linus Torvalds [Fri, 3 Nov 2023 05:38:47 +0000 (19:38 -1000)]
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
Linus Torvalds [Fri, 3 Nov 2023 02:15:30 +0000 (16:15 -1000)]
Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
Linus Torvalds [Fri, 3 Nov 2023 01:45:15 +0000 (15:45 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
Linus Torvalds [Fri, 3 Nov 2023 01:34:59 +0000 (15:34 -1000)]
Merge tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"While the previously announced patch series for converting arch/sh to
device trees is not yet ready for inclusion to mainline and therefore
didn't make it for this pull request, there are still a small number
changes for v6.7 which include one platform (board plus CPU and driver
code) removal plus two fixes.
The removal sent in by Arnd Bergmann concerns the microdev board which
was an early SuperH prototype board that was never used in production.
With the board removed, we were able to drop the now unused code for
the SH4-202 CPU and well as the driver code for the superhyway bus and
a custom implementation for ioport_map() and ioport_unmap() which will
allow us to simplify ioport handling in the future.
Another patch set by Geert Uytterhoeven revives SuperH BIOS
earlyprintk support which got accidentally disabled in e76fe57447e88916 ("sh: Remove old early serial console code V2"), the
second patch in the series updates the documentation.
Finally, a patch by Masami Hiramatsu fixes a regression reported by
the kernel test robot which uncovered that arch/sh is not implementing
arch_cmpxchg_local() and therefore needs use __generic_cmpxchg_local()
instead"
* tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
locking/atomic: sh: Use generic_cmpxchg_local for arch_cmpxchg_local()
Documentation: kernel-parameters: Add earlyprintk=bios on SH
sh: bios: Revive earlyprintk support
sh: machvec: Remove custom ioport_{un,}map()
sh: Remove superhyway bus support
sh: Remove unused SH4-202 support
sh: Remove stale microdev board
Linus Torvalds [Fri, 3 Nov 2023 01:31:01 +0000 (15:31 -1000)]
Merge tag 'm68knommu-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"A few changes, most of them related to fixing warnings when compiling
with "W=1". These follow up Geert's recent changes for M68K for this
too. These ones complete the fixes for the nommu and ColdFire specific
code.
Also a couple of other fixes to improve ROM default addressing and
compiling for the Cleopatra boards.
Summary:
- improve default Kconfig ROM section settings
- fix compilation for some Cleopatra boards
- fixes and cleanups for warnings compiling with 'W=1'"
* tag 'm68knommu-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: 68000: fix warning in timer code
m68k: 68000: fix warnings in 68000 interrupt handling
m68k: coldfire: remove unused variable in MMU code
m68k: coldfire: fix warnings in uboot argument processing
m68k: coldfire: make mcf_maskimr() static
m68k: coldfire: ensure gpio prototypes visible
m68k: coldfire: add and use "vectors.h"
m68knommu: fix compilation for ColdFire/Cleopatra boards
m68knommu: improve config ROM setting defaults
Linus Torvalds [Fri, 3 Nov 2023 01:20:30 +0000 (15:20 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Nothing exciting this cycle, most of the diffstat is changing SPDX
'or' to 'OR'.
Summary:
- Bugfixes for hns, mlx5, and hfi1
- Hardening patches for size_*, counted_by, strscpy
- rts fixes from static analysis
- Dump SRQ objects in rdma netlink, with hns support
- Fix a performance regression in mlx5 MR deregistration
- New XDR (200Gb/lane) link speed
- SRQ record doorbell latency optimization for hns
- IPSEC support for mlx5 multi-port mode
- ibv_rereg_mr() support for irdma
- Affiliated event support for bnxt_re
- Opt out for the spec compliant qkey security enforcement as we
discovered SW that breaks under enforcement
- Comment and trivial updates"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (50 commits)
IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF
RDMA/mlx5: Fix mkey cache WQ flush
RDMA/hfi1: Workaround truncation compilation error
IB/hfi1: Fix potential deadlock on &irq_src_lock and &dd->uctxt_lock
RDMA/core: Remove NULL check before dev_{put, hold}
RDMA/hfi1: Remove redundant assignment to pointer ppd
RDMA/mlx5: Change the key being sent for MPV device affiliation
RDMA/bnxt_re: Fix clang -Wimplicit-fallthrough in bnxt_re_handle_cq_async_error()
RDMA/hns: Fix init failure of RoCE VF and HIP08
RDMA/hns: Fix unnecessary port_num transition in HW stats allocation
RDMA/hns: The UD mode can only be configured with DCQCN
RDMA/hns: Add check for SL
RDMA/hns: Fix signed-unsigned mixed comparisons
RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()
RDMA/hns: Fix printing level of asynchronous events
RDMA/core: Add support to set privileged QKEY parameter
RDMA/bnxt_re: Do not report SRQ error in srq notification
RDMA/bnxt_re: Report async events and errors
RDMA/bnxt_re: Update HW interface headers
IB/mlx5: Fix rdma counter binding for RAW QP
...
Linus Torvalds [Fri, 3 Nov 2023 01:13:50 +0000 (15:13 -1000)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
scsi_debug) plus the usual assorted minor fixes and updates.
The major change this time around is a prep patch for rethreading of
the driver reset handler API not to take a scsi_cmd structure which
starts to reduce various drivers' dependence on scsi_cmd in error
handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits)
scsi: ufs: core: Leave space for '\0' in utf8 desc string
scsi: ufs: core: Conversion to bool not necessary
scsi: ufs: core: Fix race between force complete and ISR
scsi: megaraid: Fix up debug message in megaraid_abort_and_reset()
scsi: aic79xx: Fix up NULL command in ahd_done()
scsi: message: fusion: Initialize return value in mptfc_bus_reset()
scsi: mpt3sas: Fix loop logic
scsi: snic: Remove useless code in snic_dr_clean_pending_req()
scsi: core: Add comment to target_destroy in scsi_host_template
scsi: core: Clean up scsi_dev_queue_ready()
scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
scsi: target: core: Fix kernel-doc comment
scsi: pmcraid: Fix kernel-doc comment
scsi: core: Handle depopulation and restoration in progress
scsi: ufs: core: Add support for parsing OPP
scsi: ufs: core: Add OPP support for scaling clocks and regulators
scsi: ufs: dt-bindings: common: Add OPP table
scsi: scsi_debug: Add param to control sdev's allow_restart
scsi: scsi_debug: Add debugfs interface to fail target reset
scsi: scsi_debug: Add new error injection type: Reset LUN failed
...
Linus Torvalds [Fri, 3 Nov 2023 01:06:04 +0000 (15:06 -1000)]
Merge tag 'libnvdimm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
- updates to deprecated and changed interfaces
- bug/kdoc fixes
* tag 'libnvdimm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm: remove kernel-doc warnings:
testing: nvdimm: make struct class structures constant
libnvdimm: Annotate struct nd_region with __counted_by
nd_btt: Make BTT lanes preemptible
libnvdimm/of_pmem: Use devm_kstrdup instead of kstrdup and check its return value
dax: refactor deprecated strncpy
Linus Torvalds [Fri, 3 Nov 2023 01:01:33 +0000 (15:01 -1000)]
Merge tag 'for-linus-6.7-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI update from Corey Minyard:
"Only one change, and I would normally just wait, but it will make the
people trying to get rid of strncpy happy. Its a good change, anyway"
* tag 'for-linus-6.7-1' of https://github.com/cminyard/linux-ipmi:
ipmi: refactor deprecated strncpy
Linus Torvalds [Fri, 3 Nov 2023 00:53:19 +0000 (14:53 -1000)]
Merge tag 'leds-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Add support for a bunch more colours
New Drivers:
- Add support for Kinetic KTD2026/7 RGB/White LEDs
New Functionality:
- Add support for device to enter HW Controlled Mode to Turris Omnia
LEDs
- Add support for HW Gamma Correction to Turris Omnia LEDs
Fix-ups:
- Apply new __counted_by() annotation to several data structures
containing flexible arrays
- Rid the return value from Platform's .remove() operation
- Use *_cansleep() variants for instances were threads can sleep
- Improve the semantics when setting the brightness
- Generic clean-ups; code reduction, coding style, standard patterns
- Replace strncpy() with strscpy()
- Fix-up / add various documentation
- Re-author the GPIO associated Trigger to use trigger-sources
- Move to using standard APIs and helpers
- Improve error checking
- Stop using static GPIO bases
Bug Fixes:
- Fix Pointer to Enum casing warnings
- Do not pretend that I2C backed device supports SMBUS
- Ensure PWM LEDs are extinguished when disabled, rather than held in
a state
- Fix 'output may be truncated' warnings"
* tag 'leds-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (43 commits)
leds: lp5521: Add an error check in lp5521_post_init_device
leds: gpio: Update headers
leds: gpio: Remove unneeded assignment
leds: gpio: Move temporary variable for struct device to gpio_led_probe()
leds: gpio: Refactor code to use devm_gpiod_get_index_optional()
leds: gpio: Utilise PTR_ERR_OR_ZERO()
leds: gpio: Keep driver firmware interface agnostic
leds: core: Refactor led_update_brightness() to use standard pattern
leds: turris-omnia: Fix brightness setting and trigger activating
leds: sc27xx: Move mutex_init() down
leds: trigger: netdev: Move size check in set_device_name
leds: Add ktd202x driver
dt-bindings: leds: Add Kinetic KTD2026/2027 LED
leds: core: Add more colors from DT bindings to led_colors
dt-bindings: leds: Last color ID is now 14 (LED_COLOR_ID_LIME)
leds: tca6507: Don't use fixed GPIO base
leds: lp3952: Convert to use maple tree register cache
leds: lm392x: Convert to use maple tree register cache
leds: aw200xx: Convert to use maple tree register cache
leds: lm3601x: Convert to use maple tree register cache
...
Linus Torvalds [Fri, 3 Nov 2023 00:46:31 +0000 (14:46 -1000)]
Merge tag 'backlight-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Add new Device Tree binding for Monolithic Power (MPS) MP3309C
step-up converter
- Document brightness-levels in bindings for; generic, LED and PWM
Bug Fixes:
- Ensure PWMs are disabled on .shutdown(), .suspend() and .remove()"
* tag 'backlight-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
dt-bindings: backlight: Add brightness-levels related common properties
backlight: pwm_bl: Disable PWM on shutdown, suspend and remove
dt-bindings: backlight: Add MPS MP3309C
Linus Torvalds [Fri, 3 Nov 2023 00:40:51 +0000 (14:40 -1000)]
Merge tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Allow all MFD Cell properties to be filled in dynamically at
runtime
- Skip disabled device nodes and continue to look for subsequent
devices
New Device Support:
- Add support for Lunar Lake-M PCI to Intel LPSS PCI
- Add support for Denverton to Intel ICH LPC
New Functionality:
- Add support for Clocks to Texas Instruments TWL* Core
- Add support for Interrupts to STMicroelectronics STM32 Timers
Fix-ups:
- Convert to new devm-* (managed) power-off API
- Remove superfluous code
- Bunch of Device Tree additions, conversions and adaptions
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Trivial coding-style / spelling type clean-ups
- Constify / staticify changes
- Expand or edit on existing documentation
- Convert some Regmap configurations to use the Maple Tree cache
- Apply new __counted_by() annotation to several data structures
containing flexible arrays
- Replace strncpy() with strscpy()
Bug Fixes:
- Remove double put creating reference imbalances
- Ensure headphone/lineout detection gets set when booting with ACPI"
* tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
mfd: lpc_ich: Mark *_gpio_offsets data with const
spmi: rename spmi device lookup helper
spmi: document spmi_device_from_of() refcounting
dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
mfd: rk8xx: Add support for RK806 power off
mfd: rk8xx: Add support for standard system-power-controller property
dt-bindings: mfd: rk806: Allow system-power-controller property
dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller
dt-bindings: mfd: max8925: Convert to DT schema format
mfd: Use i2c_get_match_data() in a selection of drivers
mfd: Use device_get_match_data() in a bunch of drivers
mfd: mc13xxx-spi/wm831x-spi: Use spi_get_device_match_data()
mfd: motorola-cpcap: Drop unnecessary of_match_device() call
mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs
mfd: qcom-spmi-pmic: Switch to EXPORT_SYMBOL_GPL()
mfd: qcom-spmi-pmic: Fix revid implementation
mfd: qcom-spmi-pmic: Fix reference leaks in revid helper
mfd: intel-m10-bmc: Change contact for ABI docs
mfd: max8907: Convert to use maple tree register cache
mfd: max77686: Convert to use maple tree register cache
...
Linus Torvalds [Fri, 3 Nov 2023 00:34:14 +0000 (14:34 -1000)]
Merge tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization.
Other than that, there have little change wrt API, rather lots of
driver-specific updates and fixes.
Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list"
* tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits)
ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()
ALSA: hda: cs35l41: mark cs35l41_verify_id() static
ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
ASoC: soc-dai: add flag to mute and unmute stream during trigger
ASoC: ams-delta.c: use component after check
ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63
ASoC: codecs: aw88399: fix typo in Kconfig select
ASoC: amd: acp: add ACPI dependency
ASoC: Intel: avs: Add rt5514 machine board
ASoC: Intel: avs: Add rt5514 machine board
ALSA: scarlett2: Add missing check with firmware version control
ALSA: virtio: use ack callback
ALSA: scarlett2: Remap Level Meter values
ALSA: scarlett2: Allow passing any output to line_out_remap()
ALSA: scarlett2: Add support for reading firmware version
ALSA: scarlett2: Rename Gen 3 config sets
ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
ASoC: cs35l41: Detect CSPL errors when sending CSPL commands
ALSA: hda: cs35l41: Check CSPL state after loading firmware
ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend
...
projects / mirror_ubuntu-kernels.git / log