"TPM is working for me so I can log into employer's network in 2.6.37.
It broke when I tried 2.6.38-rc6, with the following relevant lines
from my dmesg:
This caused me to get suspicious, especially since the _other_ TPM
commit in 2.6.38 had already been reverted, so I tried reverting
commit c4ff4b829e: "TPM: Long default timeout fix". With this commit
reverted, my TPM on my Lenovo T410 is once again working."
Several ACPI drivers fail to build if CONFIG_NET is unset, because
they refer to things depending on CONFIG_THERMAL that in turn depends
on CONFIG_NET. However, CONFIG_THERMAL doesn't really need to depend
on CONFIG_NET, because the only part of it requiring CONFIG_NET is
the netlink interface in thermal_sys.c.
Put the netlink interface in thermal_sys.c under #ifdef CONFIG_NET
and remove the dependency of CONFIG_THERMAL on CONFIG_NET from
drivers/thermal/Kconfig.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Len Brown <lenb@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Luming Yu <luming.yu@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 1 Mar 2011 01:58:09 +0000 (17:58 -0800)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.
drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo
Linus Torvalds [Tue, 1 Mar 2011 01:55:08 +0000 (17:55 -0800)]
Merge branches 'perf-fixes-for-linus', 'x86-fixes-for-linus' and 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf timechart: Fix max number of cpus
perf timechart: Fix black idle boxes in the title
perf hists: Print number of samples, not the period sum
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Use u32 instead of long to set reset vector back to 0
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clockevents: Prevent oneshot mode when broadcast device is periodic
Linus Torvalds [Tue, 1 Mar 2011 01:53:04 +0000 (17:53 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix truncate after open
fuse: fix hang of single threaded fuseblk filesystem
Linus Torvalds [Tue, 1 Mar 2011 01:52:47 +0000 (17:52 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: Check heartbeat mode for kernel stacks only
Ocfs2/refcounttree: Fix a bug for refcounttree to writeback clusters in a right number.
ocfs2: Fix estimate of necessary credits for mkdir
Linus Torvalds [Tue, 1 Mar 2011 01:47:09 +0000 (17:47 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
eukrea-tlv320: fix platform_name
ASoC: correct pxa AC97 DAI names
ALSA: hda - Add support for new IDT 92HD98 and 92HD99 codecs
ALSA: HDA: Add ideapad quirk for two Dell machines
ALSA: HDA: Add a new Conexant codec 506e (20590)
ALSA: usb-audio: fix oops due to cleanup race when disconnecting
ASoC: Hook wm_hubs micbiases up to CLK_SYS
ASoC: Correct definition of WM8903_VMID_RES_5K
ASoC: Fix WM8958 default microphone detection argument ordering
ALSA: HDA: Fix mic initialization in VIA auto parser
ALSA: fix one memory leak in sound jack
Ben Hutchings [Sun, 27 Feb 2011 05:41:35 +0000 (05:41 +0000)]
mm: <asm-generic/pgtable.h> must include <linux/mm_types.h>
Commit e2cda3226481 ("thp: add pmd mangling generic functions") replaced
some macros in <asm-generic/pgtable.h> with inline functions.
If the functions are to be defined (not all architectures need them)
then struct vm_area_struct must be defined first. So include
<linux/mm_types.h>.
Fixes a build failure seen in Debian:
CC [M] drivers/media/dvb/mantis/mantis_pci.o
In file included from arch/arm/include/asm/pgtable.h:460,
from drivers/media/dvb/mantis/mantis_pci.c:25:
include/asm-generic/pgtable.h: In function 'ptep_test_and_clear_young':
include/asm-generic/pgtable.h:29: error: dereferencing pointer to incomplete type
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don Zickus [Tue, 8 Feb 2011 04:25:00 +0000 (23:25 -0500)]
x86: Use u32 instead of long to set reset vector back to 0
A customer of ours, complained that when setting the reset
vector back to 0, it trashed other data and hung their box.
They noticed when only 4 bytes were set to 0 instead of 8,
everything worked correctly.
Mathew pointed out:
|
| We're supposed to be resetting trampoline_phys_low and
| trampoline_phys_high here, which are two 16-bit values.
| Writing 64 bits is definitely going to overwrite space
| that we're not supposed to be touching.
|
So limit the area modified to u32.
Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: Matthew Garrett <mjg@redhat.com> Cc: <stable@kernel.org>
LKML-Reference: <1297139100-424-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas Renninger [Sun, 27 Feb 2011 21:36:46 +0000 (22:36 +0100)]
perf timechart: Fix max number of cpus
Currently numcpus is determined in pid_put_sample which is only
called on sched_switch/sched_wakeup sample processing.
On a machine with a lot cpus I often saw the last cpu missing.
Check for (max) numcpus on every event happening and in the
beginning. -> fixes the issue for me.
Signed-off-by: Thomas Renninger <trenn@suse.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: lenb@kernel.org
LKML-Reference: <1298842606-55712-6-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas Renninger [Sun, 27 Feb 2011 21:36:45 +0000 (22:36 +0100)]
perf timechart: Fix black idle boxes in the title
This fix is needed for eye of gnome and firefox svg viewers.
Only Inkscape can handle the broken case.
Compare with the other svg_legenda_box declarations, looks
like a typo slipped in at this place.
Signed-off-by: Thomas Renninger <trenn@suse.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: lenb@kernel.org
LKML-Reference: <1298842606-55712-5-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ben Skeggs [Mon, 28 Feb 2011 04:22:12 +0000 (14:22 +1000)]
drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo
Somehow fixes a misrendering + hang at GDM startup on my NVA8...
My first guess would have been stale TLB entries laying around that a new
bo then accidentally inherits. That doesn't make a great deal of sense
however, as when we mapped the pages for the new bo the TLBs would've
gotten flushed anyway.
Thomas Gleixner [Fri, 25 Feb 2011 21:34:23 +0000 (22:34 +0100)]
clockevents: Prevent oneshot mode when broadcast device is periodic
When the per cpu timer is marked CLOCK_EVT_FEAT_C3STOP, then we only
can switch into oneshot mode, when the backup broadcast device
supports oneshot mode as well. Otherwise we would try to switch the
broadcast device into an unsupported mode unconditionally. This went
unnoticed so far as the current available broadcast devices support
oneshot mode. Seth unearthed this problem while debugging and working
around an hpet related BIOS wreckage.
Add the necessary check to tick_is_oneshot_available().
Linus Torvalds [Fri, 25 Feb 2011 23:15:17 +0000 (15:15 -0800)]
Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
PM: Make ACPI wakeup from S5 work again when CONFIG_PM_SLEEP is unset
Hugh Dickins [Fri, 25 Feb 2011 22:44:29 +0000 (14:44 -0800)]
memcg: more mem_cgroup_uncharge() batching
It seems odd that truncate_inode_pages_range(), called not only when
truncating but also when evicting inodes, has mem_cgroup_uncharge_start
and _end() batching in its second loop to clear up a few leftovers, but
not in its first loop that does almost all the work: add them there too.
Jan Kara [Fri, 25 Feb 2011 22:44:27 +0000 (14:44 -0800)]
aio: fix race between io_destroy() and io_submit()
A race can occur when io_submit() races with io_destroy():
CPU1 CPU2
io_submit()
do_io_submit()
...
ctx = lookup_ioctx(ctx_id);
io_destroy()
Now do_io_submit() holds the last reference to ctx.
...
queue new AIO
put_ioctx(ctx) - frees ctx with active AIOs
We solve this issue by checking whether ctx is being destroyed in AIO
submission path after adding new AIO to ctx. Then we are guaranteed that
either io_destroy() waits for new AIO or we see that ctx is being
destroyed and bail out.
Cc: Nick Piggin <npiggin@kernel.dk> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin [Fri, 25 Feb 2011 22:44:26 +0000 (14:44 -0800)]
aio: fix rcu ioctx lookup
aio-dio-invalidate-failure GPFs in aio_put_req from io_submit.
lookup_ioctx doesn't implement the rcu lookup pattern properly.
rcu_read_lock does not prevent refcount going to zero, so we might take
a refcount on a zero count ioctx.
Fix the bug by atomically testing for zero refcount before incrementing.
[jack@suse.cz: added comment into the code] Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lei Xu [Fri, 25 Feb 2011 22:44:23 +0000 (14:44 -0800)]
drivers/rtc/rtc-ds3232.c: fix time range difference between linux and RTC chip
In linux rtc_time struct, tm_mon range is 0~11, tm_wday range is 0~6,
while in RTC HW REG, month range is 1~12, day of the week range is 1~7,
this patch adjusts difference of them.
The efect of this bug was that most of month will be operated on as the
next month by the hardware (When in Jan it maybe even worse). For
example, if in May, software wrote 4 to the hardware, which handled it as
April. Then the logic would be different between software and hardware,
which would cause weird things to happen.
Signed-off-by: Lei Xu <B33228@freescale.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: john stultz <johnstul@us.ibm.com> Cc: Jack Lan <jack.lan@freescale.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Timo Warns [Fri, 25 Feb 2011 22:44:21 +0000 (14:44 -0800)]
ldm: corrupted partition table can cause kernel oops
The kernel automatically evaluates partition tables of storage devices.
The code for evaluating LDM partitions (in fs/partitions/ldm.c) contains
a bug that causes a kernel oops on certain corrupted LDM partitions. A
kernel subsystem seems to crash, because, after the oops, the kernel no
longer recognizes newly connected storage devices.
The patch changes ldm_parse_vmdb() to Validate the value of vblk_size.
Signed-off-by: Timo Warns <warns@pre-sense.de> Cc: Eugene Teo <eugeneteo@kernel.sg> Acked-by: Richard Russon <ldm@flatcap.org> Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Fri, 25 Feb 2011 22:44:20 +0000 (14:44 -0800)]
mm: vmscan: stop reclaim/compaction earlier due to insufficient progress if !__GFP_REPEAT
should_continue_reclaim() for reclaim/compaction allows scanning to
continue even if pages are not being reclaimed until the full list is
scanned. In terms of allocation success, this makes sense but potentially
it introduces unwanted latency for high-order allocations such as
transparent hugepages and network jumbo frames that would prefer to fail
the allocation attempt and fallback to order-0 pages. Worse, there is a
potential that the full LRU scan will clear all the young bits, distort
page aging information and potentially push pages into swap that would
have otherwise remained resident.
This patch will stop reclaim/compaction if no pages were reclaimed in the
last SWAP_CLUSTER_MAX pages that were considered. For allocations such as
hugetlbfs that use __GFP_REPEAT and have fewer fallback options, the full
LRU list may still be scanned.
Order-0 allocation should not be affected because RECLAIM_MODE_COMPACTION
is not set so the following avoids the gfp_mask being examined:
if (!(sc->reclaim_mode & RECLAIM_MODE_COMPACTION))
return false;
A tool was developed based on ftrace that tracked the latency of
high-order allocations while transparent hugepage support was enabled and
three benchmarks were run. The "fix-infinite" figures are 2.6.38-rc4 with
Johannes's patch "vmscan: fix zone shrinking exit when scan work is done"
applied.
STREAM Highorder Allocation Latency Statistics
fix-infinite break-early
1 :: Count 10298 10229
1 :: Min 0.4560 0.4640
1 :: Mean 1.0589 1.0183
1 :: Max 14.5990 11.7510
1 :: Stddev 0.5208 0.4719
2 :: Count 2 1
2 :: Min 1.8610 3.7240
2 :: Mean 3.4325 3.7240
2 :: Max 5.0040 3.7240
2 :: Stddev 1.5715 0.0000
9 :: Count 111696 111694
9 :: Min 0.5230 0.4110
9 :: Mean 10.5831 10.5718
9 :: Max 38.4480 43.2900
9 :: Stddev 1.1147 1.1325
Mean time for order-1 allocations is reduced. order-2 looks increased but
with so few allocations, it's not particularly significant. THP mean
allocation latency is also reduced. That said, allocation time varies so
significantly that the reductions are within noise.
Max allocation time is reduced by a significant amount for low-order
allocations but reduced for THP allocations which presumably are now
breaking before reclaim has done enough work.
SysBench Highorder Allocation Latency Statistics
fix-infinite break-early
1 :: Count 15745 15677
1 :: Min 0.4250 0.4550
1 :: Mean 1.1023 1.0810
1 :: Max 14.4590 10.8220
1 :: Stddev 0.5117 0.5100
2 :: Count 1 1
2 :: Min 3.0040 2.1530
2 :: Mean 3.0040 2.1530
2 :: Max 3.0040 2.1530
2 :: Stddev 0.0000 0.0000
9 :: Count 2017 1931
9 :: Min 0.4980 0.7480
9 :: Mean 10.4717 10.3840
9 :: Max 24.9460 26.2500
9 :: Stddev 1.1726 1.1966
Again, mean time for order-1 allocations is reduced while order-2
allocations are too few to draw conclusions from. The mean time for THP
allocations is also slightly reduced albeit the reductions are within
varianes.
Once again, our maximum allocation time is significantly reduced for
low-order allocations and slightly increased for THP allocations.
Anon stream mmap reference Highorder Allocation Latency Statistics
1 :: Count 1376 1790
1 :: Min 0.4940 0.5010
1 :: Mean 1.0289 0.9732
1 :: Max 6.2670 4.2540
1 :: Stddev 0.4142 0.2785
2 :: Count 1 -
2 :: Min 1.9060 -
2 :: Mean 1.9060 -
2 :: Max 1.9060 -
2 :: Stddev 0.0000 -
9 :: Count 11266 11257
9 :: Min 0.4990 0.4940
9 :: Mean 27250.4669 24256.1919
9 :: Max 11439211.0000 6008885.0000
9 :: Stddev 226427.4624 186298.1430
This benchmark creates one thread per CPU which references an amount of
anonymous memory 1.5 times the size of physical RAM. This pounds swap
quite heavily and is intended to exercise THP a bit.
Mean allocation time for order-1 is reduced as before. It's also reduced
for THP allocations but the variations here are pretty massive due to
swap. As before, maximum allocation times are significantly reduced.
Overall, the patch reduces the mean and maximum allocation latencies for
the smaller high-order allocations. This was with Slab configured so it
would be expected to be more significant with Slub which uses these size
allocations more aggressively.
The mean allocation times for THP allocations are also slightly reduced.
The maximum latency was slightly increased as predicted by the comments
due to reclaim/compaction breaking early. However, workloads care more
about the latency of lower-order allocations than THP so it's an
acceptable trade-off.
Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The regulator framework is used for power management. The regulators are
only named in the driver code, the actual control stuff is in the board
file for each architecture or use case.
The PN544 chip has three regulators that can be controlled or not -
depending on the architecture where the chip is being used. So some of
the regulators may not be controllable. In our current case the third
regulator, which was missing from the code, went unnoticed because we
didn't need to control it. To be as general as possible - in this respect
- the driver needs to list all regulators. Then the board file can be
used to actually set the usage.
Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/nfc/Kconfig: use full form of the NFC acronym
Spell out the NFC acronym when it's shown for the first time.
Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davide Libenzi [Fri, 25 Feb 2011 22:44:12 +0000 (14:44 -0800)]
epoll: prevent creating circular epoll structures
In several places, an epoll fd can call another file's ->f_op->poll()
method with ep->mtx held. This is in general unsafe, because that other
file could itself be an epoll fd that contains the original epoll fd.
The code defends against this possibility in its own ->poll() method using
ep_call_nested, but there are several other unsafe calls to ->poll
elsewhere that can be made to deadlock. For example, the following simple
program causes the call in ep_insert recursively call the original fd's
->poll, leading to deadlock:
#include <unistd.h>
#include <sys/epoll.h>
int main(void) {
int e1, e2, p[2];
struct epoll_event evt = {
.events = EPOLLIN
};
On insertion, check whether the inserted file is itself a struct epoll,
and if so, do a recursive walk to detect whether inserting this file would
create a loop of epoll structures, which could lead to deadlock.
[nelhage@ksplice.com: Use epmutex to serialize concurrent inserts] Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Reported-by: Nelson Elhage <nelhage@ksplice.com> Tested-by: Nelson Elhage <nelhage@ksplice.com> Cc: <stable@kernel.org> [2.6.34+, possibly earlier] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 25 Feb 2011 22:04:44 +0000 (14:04 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator, mc13xxx: Remove pointless test for unsigned less than zero
regulator: Fix warning with CONFIG_BUG disabled
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: fix fiemap bugs with delalloc
Btrfs: set FMODE_EXCL in btrfs_device->mode
Btrfs: make btrfs_rm_device() fail gracefully
Btrfs: Avoid accessing unmapped kernel address
Btrfs: Fix BTRFS_IOC_SUBVOL_SETFLAGS ioctl
Btrfs: allow balance to explicitly allocate chunks as it relocates
Btrfs: put ENOSPC debugging under a mount option
Linus Torvalds [Fri, 25 Feb 2011 22:02:33 +0000 (14:02 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems
x86/mrst: Fix apb timer rating when lapic timer is used
x86: Fix reboot problem on VersaLogic Menlow boards
CPU0 and CPU1 clockdomain is at the offset of 0x18 from the LPRM base.
The header file has set it wrongly to 0x0. Offset 0x0 is for CPUx power
domain control register
Fix the same.
The autogen scripts is fixed thanks to Benoit Cousson
With the old value, the clockdomain code would access the
*_PWRSTCTRL.POWERSTATE field when it thought it was accessing the
*_CLKSTCTRL.CLKTRCTRL field. In the worst case, this could cause
system power management to behave incorrectly.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoit Cousson <b-cousson@ti.com>
[paul@pwsan.com: added second paragraph to commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com>
Linus Torvalds [Fri, 25 Feb 2011 19:14:44 +0000 (11:14 -0800)]
Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
usb: musb: core: set has_tt flag
USB: xhci: mark local functions as static
USB: xhci: fix couple sparse annotations
USB: xhci: rework xhci_print_ir_set() to get ir set from xhci itself
USB: Reset USB 3.0 devices on (re)discovery
xhci: Fix an error in count_sg_trbs_needed()
xhci: Fix errors in the running total calculations in the TRB math
xhci: Clarify some expressions in the TRB math
xhci: Avoid BUG() in interrupt context
Linus Torvalds [Fri, 25 Feb 2011 19:13:26 +0000 (11:13 -0800)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md: Fix - again - partition detection when array becomes active
Fix over-zealous flush_disk when changing device size.
md: avoid spinlock problem in blk_throtl_exit
md: correctly handle probe of an 'mdp' device.
md: don't set_capacity before array is active.
md: Fix raid1->raid0 takeover
Miklos Szeredi [Fri, 25 Feb 2011 13:44:58 +0000 (14:44 +0100)]
fuse: fix truncate after open
Commit e1181ee6 "vfs: pass struct file to do_truncate on O_TRUNC
opens" broke the behavior of open(O_TRUNC|O_RDONLY) in fuse. Fuse
assumed that when called from open, a truncate() will be done, not an
ftruncate().
Fix by restoring the old behavior, based on the ATTR_OPEN flag.
Jesper Juhl [Wed, 23 Feb 2011 22:45:55 +0000 (23:45 +0100)]
regulator, mc13xxx: Remove pointless test for unsigned less than zero
The variable 'val' is a 'unsigned int', so it can never be less than zero.
This fact makes the "val < 0" part of the test done in BUG_ON() in
mc13xxx_regulator_get_voltage() rather pointles since it can never have
any effect.
This patch removes the pointless test.
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Linus Torvalds [Fri, 25 Feb 2011 01:08:48 +0000 (17:08 -0800)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/i915: Fix unintended recursion in ironlake_disable_rc6
drm/i915: fix corruptions on i8xx due to relaxed fencing
drm/i915: skip FDI & PCH enabling for DP_A
agp/intel: Experiment with a 855GM GWB bit
drm/i915: don't enable FDI & transcoder interrupts after all
drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch
Paul Walmsley [Wed, 23 Feb 2011 02:59:49 +0000 (19:59 -0700)]
OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER
OMAP2+ kernels built without CONFIG_OMAP_32K_TIMER crash on boot after the
2.6.38 sched_clock changes:
[ 0.000000] OMAP clockevent source: GPTIMER1 at 13000000 Hz
[ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 0.000000] pgd = c0004000
[ 0.000000] [00000000] *pgd=00000000
[ 0.000000] Internal error: Oops: 80000005 [#1] SMP
[ 0.000000] last sysfs file:
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 Not tainted (2.6.38-rc5-00057-g04aa67d #152)
[ 0.000000] PC is at 0x0
[ 0.000000] LR is at sched_clock_poll+0x2c/0x3c
Without CONFIG_OMAP_32K_TIMER, the kernel has an clockevent and
clocksource resolution about three orders of magnitude higher than
with CONFIG_OMAP_32K_TIMER set. The tradeoff is that the lowest
power consumption states are not available.
Fix by calling init_sched_clock() from the GPTIMER clocksource init code.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Andreas Herrmann [Thu, 24 Feb 2011 14:53:46 +0000 (15:53 +0100)]
x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems
On some SB800 systems polarity for IOAPIC pin2 is wrongly
specified as low active by BIOS. This caused system hangs after
resume from S3 when HPET was used in one-shot mode on such
systems because a timer interrupt was missed (HPET signal is
high active).
Felipe Balbi [Thu, 24 Feb 2011 08:36:53 +0000 (10:36 +0200)]
usb: musb: core: set has_tt flag
MUSB is a non-standard host implementation which
can handle all speeds with the same core. We need
to set has_tt flag after commit d199c96d41d80a567493e12b8e96ea056a1350c1 (USB: prevent
buggy hubs from crashing the USB stack) in order for
MUSB HCD to continue working.
Signed-off-by: Felipe Balbi <balbi@ti.com> Cc: stable <stable@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Tested-by: Michael Jones <michael.jones@matrix-vision.de> Tested-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
PM: Make ACPI wakeup from S5 work again when CONFIG_PM_SLEEP is unset
Commit 074037e (PM / Wakeup: Introduce wakeup source objects and
event statistics (v3)) caused ACPI wakeup to only work if
CONFIG_PM_SLEEP is set, but it also worked for CONFIG_PM_SLEEP unset
before. This can be fixed by making device_set_wakeup_enable(),
device_init_wakeup() and device_may_wakeup() work in the same way
as before commit 074037e when CONFIG_PM_SLEEP is unset.
Reported-and-tested-by: Justin Maggard <jmaggard10@gmail.com> Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tejun Heo [Thu, 24 Feb 2011 08:56:32 +0000 (09:56 +0100)]
block: bd_link_disk_holder() should hold on to holder_dir
The new implementation of bd_link_disk_holder() added by 49731baa41d
(block: restore multiple bd_link_disk_holder() support) didn't get an
extra reference for the holder_dir kobject of the slave bdev; however,
bdev kills holder_dir on removal, not release, so if the slave bdev is
removed while there are holder links, the holder_dir will be destroyed
while there still are holder links, which leads to oops later when
bd_unlink_disk_order() tries to remove those links.
Make bd_link_disk_holder() grab an extra reference for the slave's
holder_dir and put it in bd_unlink_disk_holder().
Miklos Szeredi [Thu, 24 Feb 2011 14:49:53 +0000 (15:49 +0100)]
mm: fix refcounting in swapon
Grab a reference to bdev before calling blkdev_get(), which expects
the refcount to be already incremented and either returns success or
decrements the refcount and returns an error.
The bug was introduced by e525fd89 (block: make blkdev_get/put()
handle exclusive access), which didn't take into account this behavior
of blkdev_get().
Miklos Szeredi [Thu, 24 Feb 2011 14:45:41 +0000 (15:45 +0100)]
block: fix refcounting in BLKBSZSET
Adam Kovari and others reported that disconnecting an USB drive with
an ntfs-3g filesystem would cause "kernel BUG at fs/inode.c:1421!" to
be triggered.
The BUG could be traced back to ioctl(BLKBSZSET), which would
erroneously decrement the refcount on the bdev. This is because
blkdev_get() expects the refcount to be already incremented and either
returns success or decrements the refcount and returns an error.
The bug was introduced by e525fd89 (block: make blkdev_get/put()
handle exclusive access), which didn't take into account this behavior
of blkdev_get().
This fixes
https://bugzilla.kernel.org/show_bug.cgi?id=29202
(and likely 29792 too)
Jacob Pan [Thu, 24 Feb 2011 00:07:26 +0000 (16:07 -0800)]
x86/mrst: Fix apb timer rating when lapic timer is used
Need to adjust the clockevent device rating for the structure
that will be registered with clockevent system instead of the
temporary structure.
Without this fix, APB timer rating will be higher than LAPIC
timer such that it can not be released later to be used as the
broadcast timer.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org>
LKML-Reference: <1298506046-439-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
When I wrote the first of these I had a wrong idea about the
lifetime of 'struct block_device'. It can disappear at any time that
the block device is not open if it falls out of the inode cache.
So relying on the 'size' recorded with it to detect when the
device size has changed and so we need to revalidate, is wrong.
Rather, we really do need the 'changed' attribute stored directly in
the mddev and set/tested as appropriate.
Without this patch, a sequence of:
mknod / open / close / unlink
(which can cause a block_device to be created and then destroyed)
will result in a rescan of the partition table and consequence removal
and addition of partitions.
Several of these in a row can get udev racing to create and unlink and
other code can get confused.
With the patch, the rescan is only performed when needed and so there
are no races.
This is suitable for any stable kernel from 2.6.35.
NeilBrown [Thu, 24 Feb 2011 06:25:47 +0000 (17:25 +1100)]
Fix over-zealous flush_disk when changing device size.
There are two cases when we call flush_disk.
In one, the device has disappeared (check_disk_change) so any
data will hold becomes irrelevant.
In the oter, the device has changed size (check_disk_size_change)
so data we hold may be irrelevant.
In both cases it makes sense to discard any 'clean' buffers,
so they will be read back from the device if needed.
In the former case it makes sense to discard 'dirty' buffers
as there will never be anywhere safe to write the data. In the
second case it *does*not* make sense to discard dirty buffers
as that will lead to file system corruption when you simply enlarge
the containing devices.
flush_disk calls __invalidate_devices.
__invalidate_device calls both invalidate_inodes and invalidate_bdev.
invalidate_inodes *does* discard I_DIRTY inodes and this does lead
to fs corruption.
invalidate_bev *does*not* discard dirty pages, but I don't really care
about that at present.
So this patch adds a flag to __invalidate_device (calling it
__invalidate_device2) to indicate whether dirty buffers should be
killed, and this is passed to invalidate_inodes which can choose to
skip dirty inodes.
flusk_disk then passes true from check_disk_change and false from
check_disk_size_change.
dm avoids tripping over this problem by calling i_size_write directly
rathher than using check_disk_size_change.
md does use check_disk_size_change and so is affected.
This regression was introduced by commit 608aeef17a which causes
check_disk_size_change to call flush_disk, so it is suitable for any
kernel since 2.6.27.
Cc: stable@kernel.org Acked-by: Jeff Moyer <jmoyer@redhat.com> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: NeilBrown <neilb@suse.de>
Hugh Dickins [Thu, 24 Feb 2011 05:39:49 +0000 (21:39 -0800)]
mm: fix possible cause of a page_mapped BUG
Robert Swiecki reported a BUG_ON(page_mapped) from a fuzzer, punching
a hole with madvise(,, MADV_REMOVE). That path is under mutex, and
cannot be explained by lack of serialization in unmap_mapping_range().
Reviewing the code, I found one place where vm_truncate_count handling
should have been updated, when I switched at the last minute from one
way of managing the restart_addr to another: mremap move changes the
virtual addresses, so it ought to adjust the restart_addr.
But rather than exporting the notion of restart_addr from memory.c, or
converting to restart_pgoff throughout, simply reset vm_truncate_count
to 0 to force a rescan if mremap move races with preempted truncation.
We have no confirmation that this fixes Robert's BUG,
but it is a fix that's worth making anyway.
Miklos Szeredi [Wed, 23 Feb 2011 12:49:47 +0000 (13:49 +0100)]
mm: prevent concurrent unmap_mapping_range() on the same inode
Michael Leun reported that running parallel opens on a fuse filesystem
can trigger a "kernel BUG at mm/truncate.c:475"
Gurudas Pai reported the same bug on NFS.
The reason is, unmap_mapping_range() is not prepared for more than
one concurrent invocation per inode. For example:
thread1: going through a big range, stops in the middle of a vma and
stores the restart address in vm_truncate_count.
thread2: comes in with a small (e.g. single page) unmap request on
the same vma, somewhere before restart_address, finds that the
vma was already unmapped up to the restart address and happily
returns without doing anything.
Another scenario would be two big unmap requests, both having to
restart the unmapping and each one setting vm_truncate_count to its
own value. This could go on forever without any of them being able to
finish.
Truncate and hole punching already serialize with i_mutex. Other
callers of unmap_mapping_range() do not, and it's difficult to get
i_mutex protection for all callers. In particular ->d_revalidate(),
which calls invalidate_inode_pages2_range() in fuse, may be called
with or without i_mutex.
This patch adds a new mutex to 'struct address_space' to prevent
running multiple concurrent unmap_mapping_range() on the same mapping.
[ We'll hopefully get rid of all this with the upcoming mm
preemptibility series by Peter Zijlstra, the "mm: Remove i_mmap_mutex
lockbreak" patch in particular. But that is for 2.6.39 ]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reported-by: Michael Leun <lkml20101129@newton.leun.net> Reported-by: Gurudas Pai <gurudas.pai@oracle.com> Tested-by: Gurudas Pai <gurudas.pai@oracle.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Chua reports that it can cause some bluetooth devices (he mentions
an Bluetooth Intermec scanner) to just stop responding after a while
with messages like
[ 4533.361959] btusb 8-1:1.0: no reset_resume for driver btusb?
[ 4533.361964] btusb 8-1:1.1: no reset_resume for driver btusb?
from the kernel. See also
https://bugzilla.kernel.org/show_bug.cgi?id=26182
for other reports.
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com> Reported-by: Andrew Meakovski <meako@bigmir.net> Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Cc: stable@kernel.org (for 2.6.37) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Airlie [Thu, 24 Feb 2011 02:19:43 +0000 (12:19 +1000)]
Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
drm/i915: fix corruptions on i8xx due to relaxed fencing
drm/i915: skip FDI & PCH enabling for DP_A
agp/intel: Experiment with a 855GM GWB bit
drm/i915: don't enable FDI & transcoder interrupts after all
drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch
Daniel Vetter [Tue, 22 Feb 2011 17:25:49 +0000 (18:25 +0100)]
drm/i915: fix corruptions on i8xx due to relaxed fencing
It looks like gen2 has a peculiar interleaved 2-row inter-tile
layout. Probably inherited from i81x which had 2kb tiles (which
naturally fit an even-number-of-tile-rows scheme to fit onto 4kb
pages). There is no other mention of this in any docs (also not
in the Intel internal documention according to Chris Wilson).
Problem manifests itself in corruptions in the second half of the
last tile row (if the bo has an odd number of tiles). Which can
only happen with relaxed tiling (introduced in a00b10c360b35d6431a9).
So reject set_tiling calls that don't satisfy this constrain to
prevent broken userspace from causing havoc. While at it, also
check the size for newer chipsets.
LKML: https://lkml.org/lkml/2011/2/19/5 Reported-by: Indan Zupancic <indan@nul.nu> Tested-by: Indan Zupancic <indan@nul.nu> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
Added support for usb ethernet (0x0fe6, 0x9700)
r8169: fix RTL8168DP power off issue.
r8169: correct settings of rtl8102e.
r8169: fix incorrect args to oob notify.
DM9000B: Fix PHY power for network down/up
DM9000B: Fix reg_save after spin_lock in dm9000_timeout
net_sched: long word align struct qdisc_skb_cb data
sfc: lower stack usage in efx_ethtool_self_test
bridge: Use IPv6 link-local address for multicast listener queries
bridge: Fix MLD queries' ethernet source address
bridge: Allow mcast snooping for transient link local addresses too
ipv6: Add IPv6 multicast address flag defines
bridge: Add missing ntohs()s for MLDv2 report parsing
bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 report
bridge: Fix IPv6 multicast snooping by storing correct protocol type
p54pci: update receive dma buffers before and after processing
fix cfg80211_wext_siwfreq lock ordering...
rt2x00: Fix WPA TKIP Michael MIC failures.
ath5k: Fix fast channel switching
tcp: undo_retrans counter fixes
...
Linus Torvalds [Wed, 23 Feb 2011 23:51:26 +0000 (15:51 -0800)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
amd64-agp: fix crash at second module load
drm/radeon: fix regression with AA resolve checking
drm: drop commented out code and preceding comment
drm/vblank: Enable precise vblank timestamps for interlaced and doublescan modes.
drm/vblank: Use memory barriers optimized for atomic_t instead of generics.
drm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns)
drm/radeon/kms: align height of fb allocation.
Revert "drm/radeon/kms: switch back to min->max pll post divider iteration"
Linus Torvalds [Wed, 23 Feb 2011 22:44:02 +0000 (14:44 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: check if device support discard in xfs_ioc_trim()
xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1
Henry Nestler [Tue, 22 Feb 2011 11:29:42 +0000 (11:29 +0000)]
DM9000B: Fix PHY power for network down/up
DM9000 revision B needs 1 ms delay after PHY power-on.
PHY must be powered on by writing 0 into register DM9000_GPR before
all other settings will change (see Davicom spec and example code).
Remember, that register DM9000_GPR was not changed by reset sequence.
Without this fix the FIFO is out of sync and sends wrong data after
sequence of "ifconfig ethX down ; ifconfig ethX up".
Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Mason [Wed, 23 Feb 2011 21:23:20 +0000 (16:23 -0500)]
Btrfs: fix fiemap bugs with delalloc
The Btrfs fiemap code wasn't properly returning delalloc extents,
so applications that trust fiemap to decide if there are holes in the
file see holes instead of delalloc.
This reworks the btrfs fiemap code, adding a get_extent helper that
searches for delalloc ranges and also adding a helper for extent_fiemap
that skips past holes in the file.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Dmitry Torokhov [Wed, 23 Feb 2011 16:51:28 +0000 (08:51 -0800)]
Input: serio/gameport - use 'long' system workqueue
Commit 8ee294cd9def0004887da7f44b80563493b0a097 converted serio
subsystem event handling from using a dedicated thread to using
common workqueue. Unfortunately, this regressed our boot times,
due to the fact that serio jobs take long time to execute. While
the new concurrency managed workqueue code manages long-playing
works just fine and schedules additional workers as needed, such
works wreck havoc among remaining users of flush_scheduled_work().
To solve this problem let's move serio/gameport works from system_wq
to system_long_wq which nobody tries to flush.
Dmitry Torokhov [Wed, 23 Feb 2011 04:15:07 +0000 (20:15 -0800)]
Input: synaptics - document 0x0c query
Since Synaptics technical writers department is a bit slow releasing updated
Synaptics interface guide, let's add some new bits (with their blessing)
to the code so that they don't get lost.
Florian Mickler [Mon, 7 Feb 2011 22:29:31 +0000 (23:29 +0100)]
amd64-agp: fix crash at second module load
The module forgot to sometimes unregister some resources.
This fixes Bug #22882.
[Patch updated to 2.6.38-rc3 by Randy Dunlap.] Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
Takashi Iwai [Tue, 22 Feb 2011 09:21:18 +0000 (10:21 +0100)]
ALSA: usb-audio: fix oops due to cleanup race when disconnecting
When a USB audio device is disconnected, snd_usb_audio_disconnect()
kills all audio URBs. At the same time, the application, after being
notified of the disconnection, might close the device, in which case
ALSA calls the .hw_free callback, which should free the URBs too.
Commit de1b8b93a0ba "[ALSA] Fix hang-up at disconnection of usb-audio"
prevented snd_usb_hw_free() from freeing the URBs to avoid a hang that
resulted from this race, but this introduced another race because the
URB callbacks could now be executed after snd_usb_hw_free() has
returned, and try to access already freed data.
Fix the first race by introducing a mutex to serialize the disconnect
callback and all PCM callbacks that manage URBs (hw_free and hw_params).
Reported-and-tested-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> Cc: <stable@kernel.org>
[CL: also serialize hw_params callback] Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
John Ogness [Wed, 23 Feb 2011 03:00:47 +0000 (20:00 -0700)]
OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL
In OMAP35X TRM Rev 2010-05 Figure 7-18 "DPLL With EMI Reduction
Feature", it is shown that the internal frequency is calculated by
CLK_IN/(N+1). However, the value passed to _dpll_test_fint() is
already "N+1" since Linux is using the values to divide by. In the
technical reference manual, "N" is referring to the divider's register
value (0-127).
During power management testing, it was observed that programming the
wrong jitter correction value can cause the system to become unstable
and eventually crash.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
[paul@pwsan.com: added second paragraph to commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com>
projects / mirror_ubuntu-kernels.git / log