Kernel sends an empty NFTA_SET_USERDATA attribute with no value if
userspace adds a set with no NFTA_SET_USERDATA attribute.
Fixes: e6d8ecac9e68 ("netfilter: nf_tables: Add new attributes into nft_set to store user data.") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The AMD eMMC Controller can only use the tuned clock while in HS200 and
HS400 mode. If we switch to a different mode, we need to disable the
tuned clock. If we have previously performed tuning and switch back to
HS200 or HS400, we can re-enable the tuned clock.
Previously the tuned clock was not getting disabled when switching to
DDR52 which is part of the HS400 tuning sequence.
Fixes: 34597a3f60b1 ("mmc: sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400") Signed-off-by: Raul E Rangel <rrangel@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200819125832.v2.1.Ie8f0689ec9f449203328b37409d1cf06b565f331@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The initialization done by bmips_cpu_setup() typically affects both
threads of a given core, on 7435 which supports 2 cores and 2 threads,
logical CPU number 2 and 3 would not run this initialization.
Fixes: 738a3f79027b ("MIPS: BMIPS: Add early CPU initialization code") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When the BMIPS generic cpu-feature-overrides.h file was introduced,
cpu_has_inclusive_caches/MIPS_CPU_INCLUSIVE_CACHES was not set for
BMIPS5000 CPUs. Correct this when we have initialized the MIPS secondary
cache successfully.
batadv_bla_send_claim() gets called from worker thread context through
batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that
case. This fixes "NOHZ: local_softirq_pending 08" log messages seen
when batman-adv is enabled.
Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The own OGM check is currently misplaced and can lead to the following
issues:
For one thing we might receive an aggregated OGM from a neighbor node
which has our own OGM in the first place. We would then not only skip
our own OGM but erroneously also any other, following OGM in the
aggregate.
For another, we might receive an OGM aggregate which has our own OGM in
a place other then the first one. Then we would wrongly not skip this
OGM, leading to populating the orginator and gateway table with ourself.
Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The gateway client code can try to optimize the delivery of DHCP packets to
avoid broadcasting them through the whole mesh. But also transmissions to
the client can be optimized by looking up the destination via the chaddr of
the DHCP packet.
But the chaddr is currently only done when chaddr is fully inside the
non-paged area of the skbuff. Otherwise it will not be initialized and the
unoptimized path should have been taken.
But the implementation didn't handle this correctly. It didn't retrieve the
correct chaddr but still tried to perform the TT lookup with this
uninitialized memory.
Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com Fixes: 6c413b1c22a2 ("batman-adv: send every DHCP packet as bat-unicast") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Commit ef91bb196b0d ("kernel.h: Silence sparse warning in
lower_32_bits") caused new warnings to show in the fsldma driver, but
that commit was not to blame: it only exposed some very incorrect code
that tried to take the low 32 bits of an address.
That made no sense for multiple reasons, the most notable one being that
that code was intentionally limited to only 32-bit ppc builds, so "only
low 32 bits of an address" was completely nonsensical. There were no
high bits to mask off to begin with.
But even more importantly fropm a correctness standpoint, turning the
address into an integer then caused the subsequent address arithmetic to
be completely wrong too, and the "+1" actually incremented the address
by one, rather than by four.
Which again was incorrect, since the code was reading two 32-bit values
and trying to make a 64-bit end result of it all. Surprisingly, the
iowrite64() did not suffer from the same odd and incorrect model.
This code has never worked, but it's questionable whether anybody cared:
of the two users that actually read the 64-bit value (by way of some C
preprocessor hackery and eventually the 'get_cdar()' inline function),
one of them explicitly ignored the value, and the other one might just
happen to work despite the incorrect value being read.
This patch at least makes it not fail the build any more, and makes the
logic superficially sane. Whether it makes any difference to the code
_working_ or not shall remain a mystery.
On some architectures (like ARM), virt_to_gfn cannot be used for
vmalloc'd memory because of its reliance on virt_to_phys. This patch
introduces a check for vmalloc'd addresses and obtains the PFN using
vmalloc_to_pfn in that case.
When amdgpu_display_modeset_create_props() fails, state and
state->context should be freed to prevent memleak. It's the
same when amdgpu_dm_audio_init() fails.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
[Why]
In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We
suppose every write wil get done successfully and hence some AUX
commands might not sent out indeed.
[How]
Check if AUX_WR success. If not, retry it.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
In `amdgpu_dm_update_backlight_caps()`, there is a local
`amdgpu_dm_backlight_caps` object that is filled in by
`amdgpu_acpi_get_backlight_caps()`. However, this object is
uninitialized before the call and hence the subsequent check for
aux_support can fail since it is not initialized by
`amdgpu_acpi_get_backlight_caps()` as well. This change initializes
this local `amdgpu_dm_backlight_caps` object to 0.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
[Why]
These aren't stable on some platform configurations when driving
multiple displays, especially on higher resolution.
In particular the delay in asserting p-state and validating from
x86 outweights any power or performance benefit from the hardware
composition.
Under some configurations this will manifest itself as extreme stutter
or unresponsiveness especially when combined with cursor movement.
[How]
Disable these for now. Exposing overlays to userspace doesn't guarantee
that they'll be able to use them in any and all configurations and it's
part of the DRM contract to have userspace gracefully handle validation
failures when they occur.
Valdiation occurs as part of DC and this in particular affects RV, so
disable this in dcn10_global_validation.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Since commit a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context}
to per-cpu variables") the lockdep code itself uses percpu variables. This
leads to recursions because the percpu macros are calling preempt_enable()
which might call trace_preempt_on().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
If we configured io timeout of nbd0 to 100s. Later after we
finished using it, we configured nbd0 again and set the io
timeout to 0. We expect it would timeout after 30 seconds
and keep retry. But in fact we could not change the timeout
when we set it to 0. the timeout is still the original 100s.
So change the timeout to default 30s when we set it to zero.
It also behaves same as commit 2da22da57348 ("nbd: fix zero
cmd timeout handling v2").
It becomes more important if we were reconfigure a nbd device
and the io timeout it set to zero. Because it could take 30s
to detect the new socket and thus io could be completed more
quickly compared to 100s.
Signed-off-by: Hou Pu <houpu@bytedance.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The reason for this is that omapdrm calls drm_crtc_vblank_on() while
holding event_lock taken with spin_lock_irq().
It is not clear why drm_crtc_vblank_on() and drm_crtc_vblank_get() are
called while holding event_lock. I don't see any problem with moving
those calls outside the lock, which is what this patch does.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819103021.440288-1-tomi.valkeinen@ti.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Leases don't currently work correctly on kcephfs, as they are not broken
when caps are revoked. They could eventually be implemented similarly to
how we did them in libcephfs, but for now don't allow them.
[ idryomov: no need for simple_nosetlease() in ceph_dir_fops and
ceph_snapdir_fops ]
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
This has roughly the same effect as drm_atomic_helper_wait_for_vblanks(),
basically just ensuring that vblank accounting is enabled so that we get
valid timestamp/seqn on pageflip events.
Signed-off-by: Rob Clark <robdclark@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
clang static analysis reports this representative problem
applesmc.c:758:10: warning: 1st function call argument is an
uninitialized value
left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
buffer is filled by the earlier call
ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, ...
This problem is reported because a goto skips the status check.
Other similar problems use data from applesmc_read_key before checking
the status. So move the checks to before the use.
Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Henrik Rydberg <rydberg@bitmath.org> Link: https://lore.kernel.org/r/20200820131932.10590-1-trix@redhat.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Define shutdown callback for display drm driver,
so as to disable all the CRTCS when shutdown
notification is received by the driver.
This change will turn off the timing engine so
that no display transactions are requested
while mmu translations are getting disabled
during reboot sequence.
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Changes in v2:
- Remove NULL check from msm_pdev_shutdown (Stephen Boyd)
- Change commit text to reflect when this issue
was uncovered (Sai Prakash Ranjan)
Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When booting with heavily modularized config, the serial console
may not be able to load until after init when modules that
satisfy needed dependencies have time to load.
Unfortunately, as qcom_geni_console_setup is marked as __init,
the function may have been freed before we get to run it,
causing boot time crashes such as:
Plane validation uses an API drm_calc_scale which will
return src/dst value as a scale ratio.
when viewing the range on a scale the values should fall in as
Upscale ratio < Unity scale < Downscale ratio for src/dst formula
Fix the min and max scale ratios to suit the API accordingly.
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Tested-by: Kristian H. Kristensen <hoegsberg@google.com> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. One Lenovo PixArt
mouse is already fixed. Got two references for 17ef:602e and three
references for 17ef:6019 misbehaving like this. Got one direct bug
report for 17ef:6093 from Wyatt Ward (wyatt8740). So add
HID_QUIRK_ALWAYS_POLL for all of them.
Link: https://github.com/sriemer/fix-linux-mouse Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
(scatter|gather)_data_area() need to flush dcache after writing data to or
before reading data from a page in uio data area. The two routines are
able to handle data transfer to/from such a page in fragments and flush the
cache after each fragment was copied by calling the wrapper
tcmu_flush_dcache_range().
That means:
1) flush_dcache_page() can be called multiple times for the same page.
2) Calling flush_dcache_page() indirectly using the wrapper does not make
sense, because each call of the wrapper is for one single page only and
the calling routine already has the correct page pointer.
Change (scatter|gather)_data_area() such that, instead of calling
tcmu_flush_dcache_range() before/after each memcpy, it now calls
flush_dcache_page() before unmapping a page (when writing is complete for
that page) or after mapping a page (when starting to read the page).
After this change only calls to tcmu_flush_dcache_range() for addresses in
vmalloc'ed command ring are left over.
The patch was tested on ARM with kernel 4.19.118 and 5.7.2
Link: https://lore.kernel.org/r/20200618131632.32748-2-bstroesser@ts.fujitsu.com Tested-by: JiangYu <lnsyyj@hotmail.com> Tested-by: Daniel Meyerholt <dxm523@gmail.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
1) If remaining ring space before the end of the ring is smaller then the
next cmd to write, tcmu writes a padding entry which fills the remaining
space at the end of the ring.
Then tcmu calls tcmu_flush_dcache_range() with the size of struct
tcmu_cmd_entry as data length to flush. If the space filled by the
padding was smaller then tcmu_cmd_entry, tcmu_flush_dcache_range() is
called for an address range reaching behind the end of the vmalloc'ed
ring.
tcmu_flush_dcache_range() in a loop calls
flush_dcache_page(virt_to_page(start)); for every page being part of the
range. On x86 the line is optimized out by the compiler, as
flush_dcache_page() is empty on x86.
But I assume the above can cause trouble on other architectures that
really have a flush_dcache_page(). For paddings only the header part of
an entry is relevant due to alignment rules the header always fits in
the remaining space, if padding is needed. So tcmu_flush_dcache_range()
can safely be called with sizeof(entry->hdr) as the length here.
2) After it has written a command to cmd ring, tcmu calls
tcmu_flush_dcache_range() using the size of a struct tcmu_cmd_entry as
data length to flush. But if a command needs many iovecs, the real size
of the command may be bigger then tcmu_cmd_entry, so a part of the
written command is not flushed then.
Link: https://lore.kernel.org/r/20200528193108.9085-1-bstroesser@ts.fujitsu.com Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
AT instructions do a translation table walk and return the result, or
the fault in PAR_EL1. KVM uses these to find the IPA when the value is
not provided by the CPU in HPFAR_EL1.
If a translation table walk causes an external abort it is taken as an
exception, even if it was due to an AT instruction. (DDI0487F.a's D5.2.11
"Synchronous faults generated by address translation instructions")
While we previously made KVM resilient to exceptions taken due to AT
instructions, the device access causes mismatched attributes, and may
occur speculatively. Prevent this, by forbidding a walk through memory
described as device at stage2. Now such AT instructions will report a
stage2 fault.
Such a fault will cause KVM to restart the guest. If the AT instructions
always walk the page tables, but guest execution uses the translation cached
in the TLB, the guest can't make forward progress until the TLB entry is
evicted. This isn't a problem, as since commit 5dcd0fdbb492 ("KVM: arm64:
Defer guest entry when an asynchronous exception is pending"), KVM will
return to the host to process IRQs allowing the rest of the system to keep
running.
Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending") Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
KVM doesn't expect any synchronous exceptions when executing, any such
exception leads to a panic(). AT instructions access the guest page
tables, and can cause a synchronous external abort to be taken.
The arm-arm is unclear on what should happen if the guest has configured
the hardware update of the access-flag, and a memory type in TCR_EL1 that
does not support atomic operations. B2.2.6 "Possible implementation
restrictions on using atomic instructions" from DDI0487F.a lists
synchronous external abort as a possible behaviour of atomic instructions
that target memory that isn't writeback cacheable, but the page table
walker may behave differently.
Make KVM robust to synchronous exceptions caused by AT instructions.
Add a get_user() style helper for AT instructions that returns -EFAULT
if an exception was generated.
While KVM's version of the exception table mixes synchronous and
asynchronous exceptions, only one of these can occur at each location.
Re-enter the guest when the AT instructions take an exception on the
assumption the guest will take the same exception. This isn't guaranteed
to make forward progress, as the AT instructions may always walk the page
tables, but guest execution may use the translation cached in the TLB.
This isn't a problem, as since commit 5dcd0fdbb492 ("KVM: arm64: Defer guest
entry when an asynchronous exception is pending"), KVM will return to the
host to process IRQs allowing the rest of the system to keep running.
Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending") Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
KVM has a one instruction window where it will allow an SError exception
to be consumed by the hypervisor without treating it as a hypervisor bug.
This is used to consume asynchronous external abort that were caused by
the guest.
As we are about to add another location that survives unexpected exceptions,
generalise this code to make it behave like the host's extable.
KVM's version has to be mapped to EL2 to be accessible on nVHE systems.
The SError vaxorcism code is a one instruction window, so has two entries
in the extable. Because the KVM code is copied for VHE and nVHE, we end up
with four entries, half of which correspond with code that isn't mapped.
Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
As seen in the Vivante kernel driver, most GPUs with the BLT engine have
a broken TS cache flush. The workaround is to temporarily set the BLT
command to CLEAR_IMAGE, without actually executing the clear. Apparently
this state change is enough to trigger the required TS cache flush. As
the BLT engine is completely asychronous, we also need a few more stall
states to synchronize the flush with the frontend.
Root-caused-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Cc: Walter Lozano <walter.lozano@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Event modifiers are not mentioned in the perf record or perf stat
manpages. Add them to orient new users more effectively by pointing
them to the perf list manpage for details.
Fixes: 2055fdaf8703 ("perf list: Document precise event sampling for AMD IBS") Signed-off-by: Kim Phillips <kim.phillips@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tony Jones <tonyj@suse.de> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.
This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".
Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses
Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.
Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
It appears that a ReportSize value of zero is legal, even if a bit
non-sensical. Most of the HID code seems to handle that gracefully,
except when computing the total size in bytes. When fed as input to
memset, this leads to some funky outcomes.
Detect the corner case and correctly compute the size.
Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: William Breathitt Gray <william.gray@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
io_uring: Fix NULL pointer dereference in io_sq_wq_submit_work()
BugLink: https://bugs.launchpad.net/bugs/1895174
the commit <1c4404efcf2c0> ("<io_uring: make sure async workqueue
is canceled on exit>") caused a crash in io_sq_wq_submit_work().
when io_ring-wq get a req form async_list, which not have been
added to task_list. Then try to delete the req from task_list will caused
a "NULL pointer dereference".
Ensure add req to async_list and task_list at the sametime.
Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp.
GZIP, BZIP2, LZOP env variables are reserved by the tools. The original
attempt to redefine them internally doesn't work in makefiles/scripts
intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in
broken builds. There can be other broken build commands because of this,
so the universal solution is to use non-reserved env variables for the
compression tools.
Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2
Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.
The credit goes to @grsecurity.
As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"
This comment block explains why include/generated/compile.h is omitted,
but nothing about include/generated/autoconf.h, which might be more
difficult to understand. Add more comments.
This script copies headers by the cpio command twice; first from
srctree, and then from objtree. However, when we building in-tree,
we know the srctree and the objtree are the same. That is, all the
headers copied by the first cpio are overwritten by the second one.
This script computes md5sum of headers in srctree and in objtree.
However, when we are building in-tree, we know the srctree and the
objtree are the same. That is, we end up with the same computation
twice. In fact, the first two lines of kernel/kheaders.md5 are always
the same for in-tree builds.
Unify the two md5sum calculations.
For in-tree builds ($building_out_of_srctree is empty), we check
only two directories, "include", and "arch/$SRCARCH/include".
For out-of-tree builds ($building_out_of_srctree is 1), we check
4 directories, "$srctree/include", "$srctree/arch/$SRCARCH/include",
"include", and "arch/$SRCARCH/include" since we know they are all
different.
syzbot is reporting OOB read bug in vc_do_resize() [1] caused by memcpy()
based on outdated old_{rows,row_size} values, for resize_screen() can
recurse into vc_do_resize() which changes vc->vc_{cols,rows} that outdates
old_{rows,row_size} values which were saved before calling resize_screen().
Daniel Vetter explained that resize_screen() should not recurse into
fbcon_update_vcs() path due to FBINFO_MISC_USEREVENT being still set
when calling resize_screen().
Instead of masking FBINFO_MISC_USEREVENT before calling fbcon_update_vcs(),
we can remove FBINFO_MISC_USEREVENT by calling fbcon_update_vcs() only if
fb_set_var() returned 0. This change assumes that it is harmless to call
fbcon_update_vcs() when fb_set_var() returned 0 without reaching
fb_notifier_call_chain().
The usb_request->zero doesn't apply for isoc. Also, if we prepare a
0-length (ZLP) TRB for the OUT direction, we need to prepare an extra
TRB to pad up to the MPS alignment. Use the same bounce buffer for the
ZLP TRB and the extra pad TRB.
The SG list may be set up with entry size more than the requested
length. Check the usb_request->length and make sure that we don't setup
the TRBs to send/receive more than requested. This case may occur when
the SG entry is allocated up to a certain minimum size, but the request
length is less than that. It can also occur when the request is reused
for a different request length.
The PSZ-HA* family of USB disk drives from Sony can't handle the
REPORT OPCODES command when using the UAS protocol. This patch adds
an appropriate quirks entry.
Reported-and-tested-by: Till Dörges <doerges@pre-sense.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826143229.GB400430@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
cdc-acm.c:409:3: warning: Use of memory after it is freed
acm_process_notification(acm, (unsigned char *)dr);
There are three problems, the first one is that dr is not reset
The variable dr is set with
if (acm->nb_index)
dr = (struct usb_cdc_notification *)acm->notification_buffer;
But if the notification_buffer is too small it is resized with
if (acm->nb_size) {
kfree(acm->notification_buffer);
acm->nb_size = 0;
}
alloc_size = roundup_pow_of_two(expected_size);
/*
* kmalloc ensures a valid notification_buffer after a
* use of kfree in case the previous allocation was too
* small. Final freeing is done on disconnect.
*/
acm->notification_buffer =
kmalloc(alloc_size, GFP_ATOMIC);
dr should point to the new acm->notification_buffer.
The second problem is any data in the notification_buffer is lost
when the pointer is freed. In the normal case, the current data
is accumulated in the notification_buffer here.
Inadvertently the commit b1cd1b65afba ("USB: gadget: u_f: add overflow checks
to VLA macros") makes VLA macros to always return 0 due to different scope of
two variables of the same name. Obviously we need to have only one.
Fixes: b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Brooke Basile <brookebasile@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Some values extracted by ncm_unwrap_ntb() could possibly lead to several
different out of bounds reads of memory. Specifically the values passed
to netdev_alloc_skb_ip_align() need to be checked so that memory is not
overflowed.
Resolve this by applying bounds checking to a number of different
indexes and lengths of the structure parsing logic.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Brooke Basile <brookebasile@gmail.com> Acked-by: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
size can potentially hold an overflowed value if its assigned expression
is left unchecked, leading to a smaller than needed allocation when
vla_group_size() is used by callers to allocate memory.
To fix this, add a test for saturation before declaring variables and an
overflow check to (n) * sizeof(type).
If the expression results in overflow, vla_group_size() will return SIZE_MAX.
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
exynos_ohci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.
This device does not support UAS properly and a similar entry already
exists in drivers/usb/storage/unusual_uas.h. Without this patch,
storage_probe() defers the handling of this device to UAS, which cannot
handle it either.
Tested-by: Brice Goglin <brice.goglin@gmail.com> Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The Sound Devices MixPre-D audio card suffers from the same defect
as the Sound Devices USBPre2: an endpoint shared between a normal
audio interface and a vendor-specific interface, in violation of the
USB spec. Since the USB core now treats duplicated endpoints as bugs
and ignores them, the audio endpoint isn't available and the card
can't be used for audio capture.
Along the same lines as commit bdd1b147b802 ("USB: quirks: blacklist
duplicate ep on Sound Devices USBPre2"), this patch adds a quirks
entry saying to ignore ep5in for interface 1, leaving it available for
use with standard audio interface 2.
There's another Raydium touchscreen needs the no-lpm quirk:
[ 1.339149] usb 1-9: New USB device found, idVendor=2386, idProduct=350e, bcdDevice= 0.00
[ 1.339150] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.339151] usb 1-9: Product: Raydium Touch System
[ 1.339152] usb 1-9: Manufacturer: Raydium Corporation
...
[ 6.450497] usb 1-9: can't set config #1, error -110
PNY Pro Elite USB 3.1 Gen 2 device (SSD) doesn't respond to ATA_12
pass-through command (i.e. it just hangs). If it doesn't support this
command, it should respond properly to the host. Let's just add a quirk
to be able to move forward with other operations.
The syzbot fuzzer identified a bug in the yurex driver: It passes
GFP_KERNEL as a memory-allocation flag to usb_submit_urb() at a time
when its state is TASK_INTERRUPTIBLE, not TASK_RUNNING:
[Why]
DC uses these to raise the voltage as needed for higher dispclk/dppclk
and to ensure that we have enough bandwidth to drive the displays.
There's a bug preventing these from actuially sending messages since
it's checking the actual clock (which is 0) instead of the incoming
clock (which shouldn't be 0) when deciding to send the hardmin.
[How]
Check the clocks != 0 instead of the actual clocks.
Fixes: 9ed9203c3ee7 ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The values for "se_num" and "sh_num" come from the user in the ioctl.
They can be in the 0-255 range but if they're more than
AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in
an out of bounds read.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
There is a race when taking a CPU offline. Current code looks like this:
native_cpu_disable()
{
...
apic_soft_disable();
/*
* Any existing set bits for pending interrupt to
* this CPU are preserved and will be sent via IPI
* to another CPU by fixup_irqs().
*/
cpu_disable_common();
{
....
/*
* Race window happens here. Once local APIC has been
* disabled any new interrupts from the device to
* the old CPU are lost
*/
fixup_irqs(); // Too late to capture anything in IRR.
...
}
}
The fix is to disable the APIC *after* cpu_disable_common().
Testing was done with a USB NIC that provided a source of frequent
interrupts. A script migrated interrupts to a specific CPU and
then took that CPU offline.
Fixes: 60dcaad5736f ("x86/hotplug: Silence APIC and NMI when CPU is dead") Reported-by: Evan Green <evgreen@chromium.org> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Evan Green <evgreen@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/875zdarr4h.fsf@nanos.tec.linutronix.de/ Link: https://lore.kernel.org/r/1598501530-45821-1-git-send-email-ashok.raj@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
In the current code, when the eoi callback of the exti clears the pending
bit of the current interrupt, it will first read the values of fpr and
rpr, then logically OR the corresponding bit of the interrupt number,
and finally write back to fpr and rpr.
We found through experiments that if two exti interrupts,
we call them int1/int2, arrive almost at the same time. in our scenario,
the time difference is 30 microseconds, assuming int1 is triggered first.
there will be an extreme scenario: both int's pending bit are set to 1,
the irq handle of int1 is executed first, and eoi handle is then executed,
at this moment, all pending bits are cleared, but the int 2 has not
finally been reported to the cpu yet, which eventually lost int2.
According to stm32's TRM description about rpr and fpr: Writing a 1 to this
bit will trigger a rising edge event on event x, Writing 0 has no
effect.
Therefore, when clearing the pending bit, we only need to clear the
pending bit of the irq.
Fixes: 927abfc4461e7 ("irqchip/stm32: Add stm32mp1 support with hierarchy domain") Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # v4.18+ Link: https://lore.kernel.org/r/20200820031629.15582-1-qiuguorui1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Most of the CPU mask operations behave the same way, but for_each_cpu() and
it's variants ignore the cpumask argument and claim that CPU0 is always in
the mask. This is historical, inconsistent and annoying behaviour.
The matrix allocator uses for_each_cpu() and can be called on UP with an
empty cpumask. The calling code does not expect that this succeeds but
until commit e027fffff799 ("x86/irq: Unbreak interrupt affinity setting")
this went unnoticed. That commit added a WARN_ON() to catch cases which
move an interrupt from one vector to another on the same CPU. The warning
triggers on UP.
Add a check for the cpumask being empty to prevent this.
Fixes: 2f75d9e1c905 ("genirq: Implement bitmap matrix allocator") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The iwd daemon uses libell which sets up the skcipher operation with
two separate control messages. As the first control message is sent
without MSG_MORE, it is interpreted as an empty request.
While libell should be fixed to use MSG_MORE where appropriate, this
patch works around the bug in the kernel so that existing binaries
continue to work.
We will print a warning however.
A separate issue is that the new kernel code no longer allows the
control message to be sent twice within the same request. This
restriction is obviously incompatible with what iwd was doing (first
setting an IV and then sending the real control message). This
patch changes the kernel so that this is explicitly allowed.
Reported-by: Caleb Jorden <caljorden@hotmail.com> Fixes: f3c802a1f300 ("crypto: algif_aead - Only wake up when...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When the primary firmware node pointer is removed from a
device (set to NULL) the secondary firmware node pointer,
when it exists, is made the primary node for the device.
However, the secondary firmware node pointer of the original
primary firmware node is never cleared (set to NULL).
To avoid situation where the secondary firmware node pointer
is pointing to a non-existing object, clearing it properly
when the primary node is removed from a device in
set_primary_fwnode().
Fixes: 97badf873ab6 ("device property: Make it possible to use secondary firmware nodes") Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The bhrb_filter_map ("The Branch History Rolling Buffer") callback is
only defined in raw CPUs' power_pmu structs. The "architected" CPUs
use generic_compat_pmu, which does not have this callback, and crashes
occur if a user tries to enable branch stack for an event.
This add a NULL pointer check for bhrb_filter_map() which behaves as
if the callback returned an error.
This does not add the same check for config_bhrb() as the only caller
checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0.
It has been reported that system-wide suspend may be aborted in the
absence of any wakeup events due to unforseen interactions of it with
the runtume PM framework.
One failing scenario is when there are multiple devices sharing an
ACPI power resource and runtime-resume needs to be carried out for
one of them during system-wide suspend (for example, because it needs
to be reconfigured before the whole system goes to sleep). In that
case, the runtime-resume of that device involves turning the ACPI
power resource "on" which in turn causes runtime-resume requests
to be queued up for all of the other devices sharing it. Those
requests go to the runtime PM workqueue which is frozen during
system-wide suspend, so they are not actually taken care of until
the resume of the whole system, but the pm_runtime_barrier()
call in __device_suspend() sees them and triggers system wakeup
events for them which then cause the system-wide suspend to be
aborted if wakeup source objects are in active use.
Of course, the logic that leads to triggering those wakeup events is
questionable in the first place, because clearly there are cases in
which a pending runtime resume request for a device is not connected
to any real wakeup events in any way (like the one above). Moreover,
it is racy, because the device may be resuming already by the time
the pm_runtime_barrier() runs and so if the driver doesn't take care
of signaling the wakeup event as appropriate, it will be lost.
However, if the driver does take care of that, the extra
pm_wakeup_event() call in the core is redundant.
Accordingly, drop the conditional pm_wakeup_event() call fron
__device_suspend() and make the latter call pm_runtime_barrier()
alone. Also modify the comment next to that call to reflect the new
code and extend it to mention the need to avoid unwanted interactions
between runtime PM and system-wide device suspend callbacks.
Fixes: 1e2ef05bb8cf8 ("PM: Limit race conditions between runtime PM and system sleep (v2)") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com> Tested-by: Utkarsh H Patel <utkarsh.h.patel@intel.com> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
vdso32 should only be installed if CONFIG_COMPAT_VDSO is enabled,
since it's not even supposed to be compiled otherwise, and arm64
builds without a 32bit crosscompiler will fail.
Fixes: 8d75785a8142 ("ARM64: vdso32: Install vdso32 from vdso_install") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Cc: stable@vger.kernel.org [5.4+] Link: https://lore.kernel.org/r/20200827234012.19757-1-fllinden@amazon.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Stephen Boyd [Tue, 18 Aug 2020 01:49:50 +0000 (18:49 -0700)]
ARM64: vdso32: Install vdso32 from vdso_install
BugLink: https://bugs.launchpad.net/bugs/1895174
Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.
Sometimes re-plugging a USB device during system sleep renders the device
useless:
[ 173.418345] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x14203e2, return 0x10262
...
[ 176.496485] usb 2-4: Waited 2000ms for CONNECT
[ 176.496781] usb usb2-port4: status 0000.0262 after resume, -19
[ 176.497103] usb 2-4: can't resume, status -19
[ 176.497438] usb usb2-port4: logical disconnect
Because PLS equals to XDEV_RESUME, xHCI driver reports U3 to usbcore,
despite of CAS bit is flagged.
So proritize CAS over XDEV_RESUME to let usbcore handle warm-reset for
the port.
handler data is meant for interrupt handlers and not for storing irq chip
specific information as some devices require handler data to store internal
per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers.
This obviously creates a conflict of interests and crashes the machine
because the XEN pointer is overwritten by the driver pointer.
As the XEN data is not handler specific it should be stored in
irqdesc::irq_data::chip_data instead.
A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that.
Cc: stable@vger.kernel.org Reported-by: Roman Shaposhnik <roman@zededa.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Roman Shaposhnik <roman@zededa.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When we are processing writeback for sync(2), move_expired_inodes()
didn't set any inode expiry value (older_than_this). This can result in
writeback never completing if there's steady stream of inodes added to
b_dirty_time list as writeback rechecks dirty lists after each writeback
round whether there's more work to be done. Fix the problem by using
sync(2) start time is inode expiry value when processing b_dirty_time
list similarly as for ordinarily dirtied inodes. This requires some
refactoring of older_than_this handling which simplifies the code
noticeably as a bonus.
Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option") CC: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Inode's i_io_list list head is used to attach inode to several different
lists - wb->{b_dirty, b_dirty_time, b_io, b_more_io}. When flush worker
prepares a list of inodes to writeback e.g. for sync(2), it moves inodes
to b_io list. Thus it is critical for sync(2) data integrity guarantees
that inode is not requeued to any other writeback list when inode is
queued for processing by flush worker. That's the reason why
writeback_single_inode() does not touch i_io_list (unless the inode is
completely clean) and why __mark_inode_dirty() does not touch i_io_list
if I_SYNC flag is set.
However there are two flaws in the current logic:
1) When inode has only I_DIRTY_TIME set but it is already queued in b_io
list due to sync(2), concurrent __mark_inode_dirty(inode, I_DIRTY_SYNC)
can still move inode back to b_dirty list resulting in skipping
writeback of inode time stamps during sync(2).
2) When inode is on b_dirty_time list and writeback_single_inode() races
with __mark_inode_dirty() like:
writeback_single_inode() __mark_inode_dirty(inode, I_DIRTY_PAGES)
inode->i_state |= I_SYNC
__writeback_single_inode()
inode->i_state |= I_DIRTY_PAGES;
if (inode->i_state & I_SYNC)
bail
if (!(inode->i_state & I_DIRTY_ALL))
- not true so nothing done
We end up with I_DIRTY_PAGES inode on b_dirty_time list and thus
standard background writeback will not writeback this inode leading to
possible dirty throttling stalls etc. (thanks to Martijn Coenen for this
analysis).
Fix these problems by tracking whether inode is queued in b_io or
b_more_io lists in a new I_SYNC_QUEUED flag. When this flag is set, we
know flush worker has queued inode and we should not touch i_io_list.
On the other hand we also know that once flush worker is done with the
inode it will requeue the inode to appropriate dirty list. When
I_SYNC_QUEUED is not set, __mark_inode_dirty() can (and must) move inode
to appropriate dirty list.
Reported-by: Martijn Coenen <maco@android.com> Reviewed-by: Martijn Coenen <maco@android.com> Tested-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
projects / mirror_ubuntu-focal-kernel.git / log